- 15 Sep, 2017 40 commits
-
-
Michail Georgios Etairidis authored
commit 6c782a5e upstream. The i2c-imx driver incorrectly uses readb()/writeb() to read and write to the appropriate registers when performing a repeated start. The appropriate imx_i2c_read_reg()/imx_i2c_write_reg() functions should be used instead. Performing a repeated start results in a kernel panic. The platform is imx. Signed-off-by:
Michail G Etairidis <m.etairidis@beck-ipc.com> Fixes: ce1a7884 ("i2c: imx: add DMA support for freescale i2c driver") Fixes: 054b62d9 ("i2c: imx: fix the i2c bus hang issue when do repeat restart") Acked-by:
Fugang Duan <fugang.duan@nxp.com> Acked-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> [bwh: Backported to 3.16: drop changes in i2c_imx_dma_read()] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk>
-
Pavel Shilovsky authored
commit dcd87838 upstream. Downgrade the loglevel for SMB2 to prevent filling the log with messages if e.g. readdir was interrupted. Also make SMB2 and SMB1 codepaths do the same logging during readdir. Signed-off-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Serhey Popovych authored
commit db833d40 upstream. Network interface groups support added while ago, however there is no IFLA_GROUP attribute description in policy and netlink message size calculations until now. Add IFLA_GROUP attribute to the policy. Fixes: cbda10fa ("net_device: add support for network device groups") Signed-off-by:
Serhey Popovych <serhe.popovych@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Serhey Popovych authored
commit 07f61557 upstream. While commit 73ba57bf ("ipv6: fix backtracking for throw routes") does good job on error propagation to the fib_rules_lookup() in fib rules core framework that also corrects throw routes handling, it does not solve route reference leakage problem happened when we return -EAGAIN to the fib_rules_lookup() and leave routing table entry referenced in arg->result. If rule with matched throw route isn't last matched in the list we overwrite arg->result losing reference on throw route stored previously forever. We also partially revert commit ab997ad4 ("ipv6: fix the incorrect return value of throw route") since we never return routing table entry with dst.error == -EAGAIN when CONFIG_IPV6_MULTIPLE_TABLES is on. Also there is no point to check for RTF_REJECT flag since it is always set throw route. Fixes: 73ba57bf ("ipv6: fix backtracking for throw routes") Signed-off-by:
-
Alex Deucher authored
commit acfd6ee4 upstream. Fixes resume from suspend. bug: https://bugzilla.kernel.org/show_bug.cgi?id=196121Reported-by:
Przemek <soprwa@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 4eb59793 upstream. Disable PX on these systems. bug: https://bugs.freedesktop.org/show_bug.cgi?id=101491Signed-off-by:
-
Daniel Drake authored
commit 817ae460 upstream. Without this quirk, the touchpad is not responsive on this product, with the following message repeated in the logs: psmouse serio1: bad data from KBC - timeout Add it to the notimeout list alongside other similar Fujitsu laptops. Signed-off-by:
Daniel Drake <drake@endlessm.com> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Eric W. Biederman authored
commit 57db7e4a upstream. Thomas Gleixner wrote: > The CRIU support added a 'feature' which allows a user space task to send > arbitrary (kernel) signals to itself. The changelog says: > > The kernel prevents sending of siginfo with positive si_code, because > these codes are reserved for kernel. I think we can allow a task to > send such a siginfo to itself. This operation should not be dangerous. > > Quite contrary to that claim, it turns out that it is outright dangerous > for signals with info->si_code == SI_TIMER. The following code sequence in > a user space task allows to crash the kernel: > > id = timer_create(CLOCK_XXX, ..... signo = SIGX); > timer_set(id, ....); > info->si_signo = SIGX; > info->si_code = SI_TIMER: > info->_sifields._timer._tid = id; > info->_sifields._timer._sys_private = 2; > rt_[tg]sigqueueinfo(..., SIGX, info); > sigemptyset(&sigset); > sigaddset(&sigset, SIGX); > rt_sigtimedwait(sigset, info); > > For timers based on CLOCK_PROCESS_CPUTIME_ID, CLOCK_THREAD_CPUTIME_ID this > results in a kernel crash because sigwait() dequeues the signal and the > dequeue code observes: > > info->si_code == SI_TIMER && info->_sifields._timer._sys_private != 0 > > which triggers the following callchain: > > do_schedule_next_timer() -> posix_cpu_timer_schedule() -> arm_timer() > > arm_timer() executes a list_add() on the timer, which is already armed via > the timer_set() syscall. That's a double list add which corrupts the posix > cpu timer list. As a consequence the kernel crashes on the next operation > touching the posix cpu timer list. > > Posix clocks which are internally implemented based on hrtimers are not > affected by this because hrtimer_start() can handle already armed timers > nicely, but it's a reliable way to trigger the WARN_ON() in > hrtimer_forward(), which complains about calling that function on an > already armed timer. This problem has existed since the posix timer code was merged into 2.5.63. A few releases earlier in 2.5.60 ptrace gained the ability to inject not just a signal (which linux has supported since 1.0) but the full siginfo of a signal. The core problem is that the code will reschedule in response to signals getting dequeued not just for signals the timers sent but for other signals that happen to a si_code of SI_TIMER. Avoid this confusion by testing to see if the queued signal was preallocated as all timer signals are preallocated, and so far only the timer code preallocates signals. Move the check for if a timer needs to be rescheduled up into collect_signal where the preallocation check must be performed, and pass the result back to dequeue_signal where the code reschedules timers. This makes it clear why the code cares about preallocated timers. Reported-by:
Thomas Gleixner <tglx@linutronix.de> History Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git Reference: 66dd34ad ("signal: allow to send any siginfo to itself") Reference: 1669ce53 ("Add PTRACE_GETSIGINFO and PTRACE_SETSIGINFO") Fixes: db8b50ba ("[PATCH] POSIX clocks & timers") Signed-off-by:
"Eric W. Biederman" <ebiederm@xmission.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Mark Rutland authored
commit 3c226c63 upstream. In do_huge_pmd_numa_page(), we attempt to handle a migrating thp pmd by waiting until the pmd is unlocked before we return and retry. However, we can race with migrate_misplaced_transhuge_page(): // do_huge_pmd_numa_page // migrate_misplaced_transhuge_page() // Holds 0 refs on page // Holds 2 refs on page vmf->ptl = pmd_lock(vma->vm_mm, vmf->pmd); /* ... */ if (pmd_trans_migrating(*vmf->pmd)) { page = pmd_page(*vmf->pmd); spin_unlock(vmf->ptl); ptl = pmd_lock(mm, pmd); if (page_count(page) != 2)) { /* roll back */ } /* ... */ mlock_migrate_page(new_page, page); /* ... */ spin_unlock(ptl); put_page(page); put_page(page); // page freed here wait_on_page_locked(page); goto out; } This can result in the freed page having its waiters flag set unexpectedly, which trips the PAGE_FLAGS_CHECK_AT_PREP checks in the page alloc/free functions. This has been observed on arm64 KVM guests. We can avoid this by having do_huge_pmd_numa_page() take a reference on the page before dropping the pmd lock, mirroring what we do in __migration_entry_wait(). When we hit the race, migrate_misplaced_transhuge_page() will see the reference and abort the migration, as it may do today in other cases. Fixes: b8916634 ("mm: Prevent parallel splits during THP migration") Link: http://lkml.kernel.org/r/1497349722-6731-2-git-send-email-will.deacon@arm.comSigned-off-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Steve Capper <steve.capper@arm.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Yu Zhao authored
commit ef707629 upstream. I saw need_resched() warnings when swapping on large swapfile (TBs) because continuously allocating many pages in swap_cgroup_prepare() took too long. We already cond_resched when freeing page in swap_cgroup_swapoff(). Do the same for the page allocation. Link: http://lkml.kernel.org/r/20170604200109.17606-1-yuzhao@google.comSigned-off-by:
Yu Zhao <yuzhao@google.com> Acked-by:
Michal Hocko <mhocko@suse.com> Acked-by:
Vladimir Davydov <vdavydov.dev@gmail.com> Signed-off-by:
-
James Morse authored
commit 7258ae5c upstream. memory_failure() chooses a recovery action function based on the page flags. For huge pages it uses the tail page flags which don't have anything interesting set, resulting in: > Memory failure: 0x9be3b4: Unknown page state > Memory failure: 0x9be3b4: recovery action for unknown page: Failed Instead, save a copy of the head page's flags if this is a huge page, this means if there are no relevant flags for this tail page, we use the head pages flags instead. This results in the me_huge_page() recovery action being called: > Memory failure: 0x9b7969: recovery action for huge page: Delayed For hugepages that have not yet been allocated, this allows the hugepage to be dequeued. Fixes: 524fca1e ("HWPOISON: fix misjudgement of page_action() for errors on mlocked pages") Link: http://lkml.kernel.org/r/20170524130204.21845-1-james.morse@arm.comSigned-off-by:
James Morse <james.morse@arm.com> Tested-by:
Punit Agrawal <punit.agrawal@arm.com> Acked-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by:
-
Naveen N. Rao authored
commit a9f8553e upstream. This fixes a crash when function_graph and jprobes are used together. This is essentially commit 237d28db ("ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing"), but for powerpc. Jprobes breaks function_graph tracing since the jprobe hook needs to use jprobe_return(), which never returns back to the hook, but instead to the original jprobe'd function. The solution is to momentarily pause function_graph tracing before invoking the jprobe hook and re-enable it when returning back to the original jprobe'd function. Fixes: 6794c782 ("powerpc64: port of the function graph tracer") Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Liwei Song authored
commit 17e83549 upstream. Fix the following kernel bug: kernel BUG at drivers/iommu/intel-iommu.c:3260! invalid opcode: 0000 [#5] PREEMPT SMP Hardware name: Intel Corp. Harcuvar/Server, BIOS HAVLCRB0.X64.0013.D39.1608311820 08/31/2016 task: ffff880175389950 ti: ffff880176bec000 task.ti: ffff880176bec000 RIP: 0010:[<ffffffff8150a83b>] [<ffffffff8150a83b>] intel_unmap+0x25b/0x260 RSP: 0018:ffff880176bef5e8 EFLAGS: 00010296 RAX: 0000000000000024 RBX: ffff8800773c7c88 RCX: 000000000000ce04 RDX: 0000000080000000 RSI: 0000000000000000 RDI: 0000000000000009 RBP: ffff880176bef638 R08: 0000000000000010 R09: 0000000000000004 R10: ffff880175389c78 R11: 0000000000000a4f R12: ffff8800773c7868 R13: 00000000ffffac88 R14: ffff8800773c7818 R15: 0000000000000001 FS: 00007fef21258700(0000) GS:ffff88017b5c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000066d6d8 CR3: 000000007118c000 CR4: 00000000003406e0 Stack: 00000000ffffac88 ffffffff8199867f ffff880176bef5f8 ffff880100000030 ffff880176bef668 ffff8800773c7c88 ffff880178288098 ffff8800772c0010 ffff8800773c7818 0000000000000001 ffff880176bef648 ffffffff8150a86e Call Trace: [<ffffffff8199867f>] ? printk+0x46/0x48 [<ffffffff8150a86e>] intel_unmap_page+0xe/0x10 [<ffffffffa039d99b>] ismt_access+0x27b/0x8fa [i2c_ismt] [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80 [<ffffffff81554420>] ? __pm_runtime_suspend+0xa0/0xa0 [<ffffffff815544a0>] ? pm_suspend_timer_fn+0x80/0x80 [<ffffffff8143dfd0>] ? pci_bus_read_dev_vendor_id+0xf0/0xf0 [<ffffffff8172b36c>] i2c_smbus_xfer+0xec/0x4b0 [<ffffffff810aa4d5>] ? vprintk_emit+0x345/0x530 [<ffffffffa038936b>] i2cdev_ioctl_smbus+0x12b/0x240 [i2c_dev] [<ffffffff810aa829>] ? vprintk_default+0x29/0x40 [<ffffffffa0389b33>] i2cdev_ioctl+0x63/0x1ec [i2c_dev] [<ffffffff811b04c8>] do_vfs_ioctl+0x328/0x5d0 [<ffffffff8119d8ec>] ? vfs_write+0x11c/0x190 [<ffffffff8109d449>] ? rt_up_read+0x19/0x20 [<ffffffff811b07f1>] SyS_ioctl+0x81/0xa0 [<ffffffff819a351b>] system_call_fastpath+0x16/0x6e This happen When run "i2cdetect -y 0" detect SMBus iSMT adapter. After finished I2C block read/write, when unmap the data buffer, a wrong device address was pass to dma_unmap_single(). To fix this, give dma_unmap_single() the "dev" parameter, just like what dma_map_single() does, then unmap can find the right devices. Fixes: 13f35ac1 ("i2c: Adding support for Intel iSMT SMBus 2.0 host controller") Signed-off-by:
Liwei Song <liwei.song@windriver.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
-
Paul Mackerras authored
commit 46a704f8 upstream. If userspace attempts to call the KVM_RUN ioctl when it has hardware transactional memory (HTM) enabled, the values that it has put in the HTM-related SPRs TFHAR, TFIAR and TEXASR will get overwritten by guest values. To fix this, we detect this condition and save those SPR values in the thread struct, and disable HTM for the task. If userspace goes to access those SPRs or the HTM facility in future, a TM-unavailable interrupt will occur and the handler will reload those SPRs and re-enable HTM. If userspace has started a transaction and suspended it, we would currently lose the transactional state in the guest entry path and would almost certainly get a "TM Bad Thing" interrupt, which would cause the host to crash. To avoid this, we detect this case and return from the KVM_RUN ioctl with an EINVAL error, with the KVM exit reason set to KVM_EXIT_FAIL_ENTRY. Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Signed-off-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
-
Feras Daoud authored
commit 4542d66b upstream. The flow of creating a new child goes through ipoib_vlan_add which allocates a new interface and checks the rtnl_lock. If the lock is taken, restart_syscall will be called to restart the system call again. In this case we are not releasing the already allocated interface, causing a leak. Fixes: 9baa0b03 ("IB/ipoib: Add rtnl_link_ops support") Signed-off-by:
Feras Daoud <ferasda@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Dan Carpenter authored
commit e747f643 upstream. The default error code in pfkey_msg2xfrm_state() is -ENOBUFS. We added a new call to security_xfrm_state_alloc() which sets "err" to zero so there several places where we can return ERR_PTR(0) if kmalloc() fails. The caller is expecting error pointers so it leads to a NULL dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Dan Carpenter authored
commit 1e3d0c2c upstream. There are some missing error codes here so we accidentally return NULL instead of an error pointer. It results in a NULL pointer dereference. Fixes: df71837d ("[LSM-IPSec]: Security association restriction.") Signed-off-by:
-
Jason A. Donenfeld authored
commit 98c67d18 upstream. Otherwise, we enable all sorts of forgeries via timing attack. Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: linux-wireless@vger.kernel.org Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [bwh: Backported to 3.16: drop changes in ieee80211_crypto_aes_{cmac_256,mac}_decrypt()] Signed-off-by:
-
Emmanuel Grumbach authored
commit 769dc04d upstream. When a peer sends a BAR frame with PM bit clear, we should not modify its PM state as madated by the spec in 802.11-20012 10.2.1.2. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Paul Moore authored
commit 023f108d upstream. This patch is based on a discussion generated by an earlier patch from Tetsuo Handa: * https://marc.info/?t=149035659300001&r=1&w=2 The double free problem involves the mnt_opts field of the security_mnt_opts struct, selinux_parse_opts_str() frees the memory on error, but doesn't set the field to NULL so if the caller later attempts to call security_free_mnt_opts() we trigger the problem. In order to play it safe we change selinux_parse_opts_str() to call security_free_mnt_opts() on error instead of free'ing the memory directly. This should ensure that everything is handled correctly, regardless of what the caller may do. Fixes: e0007529 ("LSM/SELinux: Interfaces to allow FS to control mount options") Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
James Morris <james.l.morris@oracle.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Paul Mackerras authored
commit ca8efa1d upstream. This adds code to save the values of three SPRs (special-purpose registers) used by userspace to control event-based branches (EBBs), which are essentially interrupts that get delivered directly to userspace. These registers are loaded up with guest values when entering the guest, and their values are saved when exiting the guest, but we were not saving the host values and restoring them before going back to userspace. On POWER8 this would only affect userspace programs which explicitly request the use of EBBs and also use the KVM_RUN ioctl, since the only source of EBBs on POWER8 is the PMU, and there is an explicit enable bit in the PMU registers (and those PMU registers do get properly context-switched between host and guest). On POWER9 there is provision for externally-generated EBBs, and these are not subject to the control in the PMU registers. Since these registers only affect userspace, we can save them when we first come in from userspace and restore them before returning to userspace, rather than saving/restoring the host values on every guest entry/exit. Similarly, we don't need to worry about their values on offline secondary threads since they execute in the context of the idle task, which never executes in userspace. Fixes: b005255e ("KVM: PPC: Book3S HV: Context-switch new POWER8 SPRs", 2014-01-08) Signed-off-by:
-
Heiner Kallweit authored
commit fa07ab72 upstream. In case __irq_set_trigger() fails the resources requested via irq_request_resources() are not released. Add the missing release call into the error handling path. Fixes: c1bacbae ("genirq: Provide irq_request/release_resources chip callbacks") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Corentin Labbe authored
commit d2f48f05 upstream. When plugging an USB webcam I see the following message: [106385.615559] xhci_hcd 0000:04:00.0: WARN Successful completion on short TX: needs XHCI_TRUST_TX_LENGTH quirk? [106390.583860] handle_tx_event: 913 callbacks suppressed With this patch applied, I get no more printing of this message. Signed-off-by:
Corentin Labbe <clabbe.montjoie@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Tomasz Wilczyński authored
commit b8e11f7d upstream. Commit 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) removed the 10 point substraction when comparing the load against down_threshold but did not remove the related limit for the down_threshold value. As a result, down_threshold lower than 11 is not allowed even though values from 1 to 10 do work correctly too. The comment ("cannot be lower than 11 otherwise freq will not fall") also does not apply after removing the substraction. For this reason, allow down_threshold to take any value from 1 to 99 and fix the related comment. Fixes: 27ed3cd2 (cpufreq: conservative: Fix the logic in frequency decrease checking) Signed-off-by:
Tomasz Wilczyński <twilczynski@naver.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Nicholas Bellinger authored
commit ba80aa90 upstream. This patch closes a long standing race in configfs between the creation of a new symlink in create_link(), while the symlink target's config_item is being concurrently removed via configfs_rmdir(). This can happen because the symlink target's reference is obtained by config_item_get() in create_link() before the CONFIGFS_USET_DROPPING bit set by configfs_detach_prep() during configfs_rmdir() shutdown is actually checked.. This originally manifested itself on ppc64 on v4.8.y under heavy load using ibmvscsi target ports with Novalink API: [ 7877.289863] rpadlpar_io: slot U8247.22L.212A91A-V1-C8 added [ 7879.893760] ------------[ cut here ]------------ [ 7879.893768] WARNING: CPU: 15 PID: 17585 at ./include/linux/kref.h:46 config_item_get+0x7c/0x90 [configfs] [ 7879.893811] CPU: 15 PID: 17585 Comm: targetcli Tainted: G O 4.8.17-customv2.22 #12 [ 7879.893812] task: c00000018a0d3400 task.stack: c0000001f3b40000 [ 7879.893813] NIP: d000000002c664ec LR: d000000002c60980 CTR: c000000000b70870 [ 7879.893814] REGS: c0000001f3b43810 TRAP: 0700 Tainted: G O (4.8.17-customv2.22) [ 7879.893815] MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 28222242 XER: 00000000 [ 7879.893820] CFAR: d000000002c664bc SOFTE: 1 GPR00: d000000002c60980 c0000001f3b43a90 d000000002c70908 c0000000fbc06820 GPR04: c0000001ef1bd900 0000000000000004 0000000000000001 0000000000000000 GPR08: 0000000000000000 0000000000000001 d000000002c69560 d000000002c66d80 GPR12: c000000000b70870 c00000000e798700 c0000001f3b43ca0 c0000001d4949d40 GPR16: c00000014637e1c0 0000000000000000 0000000000000000 c0000000f2392940 GPR20: c0000001f3b43b98 0000000000000041 0000000000600000 0000000000000000 GPR24: fffffffffffff000 0000000000000000 d000000002c60be0 c0000001f1dac490 GPR28: 0000000000000004 0000000000000000 c0000001ef1bd900 c0000000f2392940 [ 7879.893839] NIP [d000000002c664ec] config_item_get+0x7c/0x90 [configfs] [ 7879.893841] LR [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893842] Call Trace: [ 7879.893844] [c0000001f3b43ac0] [d000000002c60980] check_perm+0x80/0x2e0 [configfs] [ 7879.893847] [c0000001f3b43b10] [c000000000329770] do_dentry_open+0x2c0/0x460 [ 7879.893849] [c0000001f3b43b70] [c000000000344480] path_openat+0x210/0x1490 [ 7879.893851] [c0000001f3b43c80] [c00000000034708c] do_filp_open+0xfc/0x170 [ 7879.893853] [c0000001f3b43db0] [c00000000032b5bc] do_sys_open+0x1cc/0x390 [ 7879.893856] [c0000001f3b43e30] [c000000000009584] system_call+0x38/0xec [ 7879.893856] Instruction dump: [ 7879.893858] 409d0014 38210030 e8010010 7c0803a6 4e800020 3d220000 e94981e0 892a0000 [ 7879.893861] 2f890000 409effe0 39200001 992a0000 <0fe00000> 4bffffd0 60000000 60000000 [ 7879.893866] ---[ end trace 14078f0b3b5ad0aa ]--- To close this race, go ahead and obtain the symlink's target config_item reference only after the existing CONFIGFS_USET_DROPPING check succeeds. This way, if configfs_rmdir() wins create_link() will return -ENONET, and if create_link() wins configfs_rmdir() will return -EBUSY. Reported-by:
Bryant G. Ly <bryantly@linux.vnet.ibm.com> Tested-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Wanpeng Li authored
commit 9bc1f09f upstream. INFO: task gnome-terminal-:1734 blocked for more than 120 seconds. Not tainted 4.12.0-rc4+ #8 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. gnome-terminal- D 0 1734 1015 0x00000000 Call Trace: __schedule+0x3cd/0xb30 schedule+0x40/0x90 kvm_async_pf_task_wait+0x1cc/0x270 ? __vfs_read+0x37/0x150 ? prepare_to_swait+0x22/0x70 do_async_page_fault+0x77/0xb0 ? do_async_page_fault+0x77/0xb0 async_page_fault+0x28/0x30 This is triggered by running both win7 and win2016 on L1 KVM simultaneously, and then gives stress to memory on L1, I can observed this hang on L1 when at least ~70% swap area is occupied on L0. This is due to async pf was injected to L2 which should be injected to L1, L2 guest starts receiving pagefault w/ bogus %cr2(apf token from the host actually), and L1 guest starts accumulating tasks stuck in D state in kvm_async_pf_task_wait() since missing PAGE_READY async_pfs. This patch fixes the hang by doing async pf when executing L1 guest. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Wanpeng Li <wanpeng.li@hotmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [bwh: Backported to 3.16: adjust context] Signed-off-by:
-
Dominik Heidler authored
commit 9b3dc0a1 upstream. This fixes a counter problem on 32bit systems: When the rx_bytes counter reached 2 GiB, it jumpd to (2^64 Bytes - 2GiB) Bytes. rtnl_link_stats64 has __u64 type and atomic_long_read returns atomic_long_t which is signed. Due to the conversation we get an incorrect value on 32bit systems if the MSB of the atomic_long_t value is set. CC: Tom Parkin <tparkin@katalix.com> Fixes: 7b7c0719 ("l2tp: avoid deadlock in l2tp stats update") Signed-off-by:
Dominik Heidler <dheidler@suse.de> Signed-off-by:
-
Al Viro authored
commit babef37d upstream. As it is, short copy in write() to append-only file will fail to truncate the excessive allocated blocks. As the matter of fact, all checks in ufs_truncate_blocks() are either redundant or wrong for that caller. As for the only other caller (ufs_evict_inode()), we only need the file type checks there. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [bwh: Backported to 3.16: - No functions need to be renamed - Adjust filenames, context] Signed-off-by:
-
Al Viro authored
commit 6b0d144f upstream. Signed-off-by:
-
Al Viro authored
commit eb315d2a upstream. Signed-off-by:
-
Al Viro authored
commit 414cf718 upstream. Signed-off-by:
-
Marc Kleine-Budde authored
commit 5cda3ee5 upstream. This patch adds the missing kfree() in gs_cmd_reset() to free the memory that is not used anymore after usb_control_msg(). Cc: Maximilian Schneider <max@schneidersoft.net> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Nicholas Bellinger authored
commit 73d4e580 upstream. This patch fixes a se_cmd->cmd_kref underflow during CMD_T_ABORTED when a fabric driver drops it's second reference from below the target_core_tmr.c based callers of transport_cmd_finish_abort(). Recently with the conversion of kref to refcount_t, this bug was manifesting itself as: [705519.601034] refcount_t: underflow; use-after-free. [705519.604034] INFO: NMI handler (kgdb_nmi_handler) took too long to run: 20116.512 msecs [705539.719111] ------------[ cut here ]------------ [705539.719117] WARNING: CPU: 3 PID: 26510 at lib/refcount.c:184 refcount_sub_and_test+0x33/0x51 Since the original kref atomic_t based kref_put() didn't check for underflow and only invoked the final callback when zero was reached, this bug did not manifest in practice since all se_cmd memory is using preallocated tags. To address this, go ahead and propigate the existing return from transport_put_cmd() up via transport_cmd_finish_abort(), and change transport_cmd_finish_abort() + core_tmr_handle_tas_abort() callers to only do their local target_put_sess_cmd() if necessary. Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Tested-by:
Gary Guo <ghg@datera.io> Tested-by:
Chu Yuan Lin <cyl@datera.io> Signed-off-by:
-
Eric Biggers authored
commit 5649645d upstream. sys_add_key() and the KEYCTL_UPDATE operation of sys_keyctl() allowed a NULL payload with nonzero length to be passed to the key type's ->preparse(), ->instantiate(), and/or ->update() methods. Various key types including asymmetric, cifs.idmap, cifs.spnego, and pkcs7_test did not handle this case, allowing an unprivileged user to trivially cause a NULL pointer dereference (kernel oops) if one of these key types was present. Fix it by doing the copy_from_user() when 'plen' is nonzero rather than when '_payload' is non-NULL, causing the syscall to fail with EFAULT as expected when an invalid buffer is specified. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 1123a604 upstream. Linu Cherian reported a WARN in cleanup_srcu_struct() when shutting down a guest running iperf on a VFIO assigned device. This happens because irqfd_wakeup() calls srcu_read_lock(&kvm->irq_srcu) in interrupt context, while a worker thread does the same inside kvm_set_irq(). If the interrupt happens while the worker thread is executing __srcu_read_lock(), updates to the Classic SRCU ->lock_count[] field or the Tree SRCU ->srcu_lock_count[] field can be lost. The docs say you are not supposed to call srcu_read_lock() and srcu_read_unlock() from irq context, but KVM interrupt injection happens from (host) interrupt context and it would be nice if SRCU supported the use case. KVM is using SRCU here not really for the "sleepable" part, but rather due to its IPI-free fast detection of grace periods. It is therefore not desirable to switch back to RCU, which would effectively revert commit 719d93cd ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING", 2014-01-16). However, the docs are overly conservative. You can have an SRCU instance only has users in irq context, and you can mix process and irq context as long as process context users disable interrupts. In addition, __srcu_read_unlock() actually uses this_cpu_dec() on both Tree SRCU and Classic SRCU. For those two implementations, only srcu_read_lock() is unsafe. When Classic SRCU's __srcu_read_unlock() was changed to use this_cpu_dec(), in commit 5a41344a ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()", 2012-11-29), __srcu_read_lock() did two increments. Therefore it kept __this_cpu_inc(), with preempt_disable/enable in the caller. Tree SRCU however only does one increment, so on most architectures it is more efficient for __srcu_read_lock() to use this_cpu_inc(), and any performance differences appear to be down in the noise. Fixes: 719d93cd ("kvm/irqchip: Speed up KVM_SET_GSI_ROUTING") Reported-by:
Linu Cherian <linuc.decode@gmail.com> Suggested-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> [bwh: Backported to 3.16: __srcu_read_lock() still updates two different counters. So follow what _this_cpu_generic_to_op() does and use raw_local_irq_{save,restore}() and raw_cpu_ptr().] Signed-off-by:
-
Paul E. McKenney authored
commit 49f5903b upstream. Currently, __srcu_read_lock() cannot be invoked from restricted environments because it contains calls to preempt_disable() and preempt_enable(), both of which can invoke lockdep, which is a bad idea in some restricted execution modes. This commit therefore moves the preempt_disable() and preempt_enable() from __srcu_read_lock() to srcu_read_lock(). It also inserts the preempt_disable() and preempt_enable() around the call to __srcu_read_lock() in do_exit(). Signed-off-by:
Josh Triplett <josh@joshtriplett.org> [bwh: Backported to 3.16: - Drop changes in do_exit() - Adjust context] Signed-off-by:
-
Christian Lamparter authored
commit 19d90ece upstream. This patch fixes a problem where the AR8035 PHY can't be detected on an Cisco Meraki MR24, if the ethernet cable is not connected on boot. Russell Senior provided steps to reproduce the issue: |Disconnect ethernet cable, apply power, wait until device has booted, |plug in ethernet, check for interfaces, no eth0 is listed. | |This appears to be a problem during probing of the AR8035 Phy chip. |When ethernet has no link, the phy detection fails, and eth0 is not |created. Plugging ethernet later has no effect, because there is no |interface as far as the kernel is concerned. The relevant part of |the boot log looks like this: |this is the failing case: | |[ 0.876611] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.882532] /plb/opb/ethernet@ef600c00: reset timeout |[ 0.888546] /plb/opb/ethernet@ef600c00: can't find PHY! |and the succeeding case: | |[ 0.876672] /plb/opb/emac-rgmii@ef601500: input 0 in RGMII mode |[ 0.883952] eth0: EMAC-0 /plb/opb/ethernet@ef600c00, MAC 00:01:.. |[ 0.890822] eth0: found Atheros 8035 Gigabit Ethernet PHY (0x01) Based on the comment and the commit message of commit 23fbb5a8 ("emac: Fix EMAC soft reset on 460EX/GT"). This is because the AR8035 PHY doesn't provide the TX Clock, if the ethernet cable is not attached. This causes the reset to timeout and the PHY detection code in emac_init_phy() is unable to detect the AR8035 PHY. As a result, the emac driver bails out early and the user left with no ethernet. In order to stay compatible with existing configurations, the driver tries the current reset approach at first. Only if the first attempt timed out, it does perform one more retry with the clock temporarily switched to the internal source for just the duration of the reset. LEDE-Bug: #687 <https://bugs.lede-project.org/index.php?do=details&task_id=687> Cc: Chris Blake <chrisrblake93@gmail.com> Reported-by:
Russell Senior <russell@personaltelco.net> Fixes: 23fbb5a8 ("emac: Fix EMAC soft reset on 460EX/GT") Signed-off-by:
Christian Lamparter <chunkeey@googlemail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Marcin Nowakowski authored
commit 698b8510 upstream. When ftrace is used with kprobes, it is possible for a kprobe to contain an invalid location (ie. only initialised to 0 and not to a specific location in the code). Trying to perform a cache flush on such location leads to a crash r4k_flush_icache_range(). Fixes: c1bf207d ("MIPS: kprobe: Add support.") Signed-off-by:
Marcin Nowakowski <marcin.nowakowski@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/16296/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Wanpeng Li authored
commit a3641631 upstream. If "i" is the last element in the vcpu->arch.cpuid_entries[] array, it potentially can be exploited the vulnerability. this will out-of-bounds read and write. Luckily, the effect is small: /* when no next entry is found, the current entry[i] is reselected */ for (j = i + 1; ; j = (j + 1) % nent) { struct kvm_cpuid_entry2 *ej = &vcpu->arch.cpuid_entries[j]; if (ej->function == e->function) { It reads ej->maxphyaddr, which is user controlled. However... ej->flags |= KVM_CPUID_FLAG_STATE_READ_NEXT; After cpuid_entries there is int maxphyaddr; struct x86_emulate_ctxt emulate_ctxt; /* 16-byte aligned */ So we have: - cpuid_entries at offset 1B50 (6992) - maxphyaddr at offset 27D0 (6992 + 3200 = 10192) - padding at 27D4...27DF - emulate_ctxt at 27E0 And it writes in the padding. Pfew, writing the ops field of emulate_ctxt would have been much worse. This patch fixes it by modding the index to avoid the out-of-bounds access. Worst case, i == j and ej->function == e->function, the loop can bail out. Reported-by:
Moguofang <moguofang@huawei.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Guofang Mo <moguofang@huawei.com> Signed-off-by:
-
SeongJae Park authored
commit 14fc42fa upstream. Few shell command examples in perf-script-python.txt has few nitpicks include: - tools/perf/scripts/python directory listing command is unnecessarily repeated. - few examples contain additional information in command prompt unnecessarily and inconsistently. This commit fixes them to enhance readability of the document. Signed-off-by:
SeongJae Park <sj38.park@gmail.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Tom Zanussi <tzanussi@gmail.com> Fixes: cff68e58 ("perf/scripts: Add perf-trace-python Documentation") Link: http://lkml.kernel.org/r/20170530111827.21732-4-sj38.park@gmail.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
