After commit 585468e5
([POWERPC] i2c: Fix build breakage introduced by OF helpers)
drivers/of/of_i2c.c needs a MODULE_LICENSE.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Added support to allow an 85xx kernel to be run from a non-zero physical
address (useful for cooperative asymmetric multiprocessing situations and
kdump).  The support can be configured at compile time by setting
CONFIG_PAGE_OFFSET, CONFIG_KERNEL_START, and CONFIG_PHYSICAL_START as
desired.

Alternatively, the kernel build can set CONFIG_RELOCATABLE.  Setting this
config option causes the kernel to determine at runtime the physical
addresses of CONFIG_PAGE_OFFSET and CONFIG_KERNEL_START.  If
CONFIG_RELOCATABLE is set, then CONFIG_PHYSICAL_START has no meaning.
However, CONFIG_PHYSICAL_START will always be used to set the LOAD program
header physical address field in the resulting ELF image.

Currently we are limited to running at a physical address that is a
multiple of 256M.  This is due to how we map TLBs to cover
lowmem.  This should be fixed to allow 64M or maybe even 16M alignment
in the future.  It is considered an error to try and run a kernel at a
non-aligned physical address.

All the magic for this support is accomplished by proper initialization
of the kernel memory subsystem and use of ARCH_PFN_OFFSET.

The use of ARCH_PFN_OFFSET only affects normal memory and not IO mappings.
ioremap uses map_page and isn't affected by ARCH_PFN_OFFSET.

/dev/mem continues to allow access to any physical address in the system
regardless of how CONFIG_PHYSICAL_START is set.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Commit 0119536c added an assembly
version of strncmp to PowerPC.  However, it changed a common header
file between arch/ppc and arch/powerpc without adding strncmp to
arch/ppc.  This fixes that omission so that arch/ppc links again.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Commit d04ceb3f moved phys_addr_t
definitions to include/asm-powerpc/types.h.  However, arch/ppc 440
builds had a duplicate definition in include/asm-ppc/mmu.h that caused
the build to fail.

This removes the duplicate definition in arch/ppc.
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The MPSC driver and prpmc2800.dts have been modified to use property
'cell-index' as the serial port number, but the early serial console
driver for the mv64x60 has not been modified to use this new property.
This fixes it.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

If one of the devices of the mv64x60 init fails, the remaining
devices are not initialized.

This changes the code to display an error and continue the
initialization.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Signed-off-by: Paul Mackerras <paulus@samba.org>

I2C parameters freq_m and freq_n are assigned defaults in the code,
but if properties for those parameters are not found in the open
firmware description the init routine returns an error and doesn't
create the platform device.

This changes the code so that it doesn't return an error if the
properties are not found but instead uses the default values.

Signed-off-by: Remi Machet (rmachet@slac.stanford.edu)
Acked-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Use the __weak macro instead of the longer __attribute__ ((weak)) form
in one place in init/main.c.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
--

 init/main.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
Signed-off-by: Paul Mackerras <paulus@samba.org>

The powerpc kernel stacks need to be naturally aligned, as they
contain the thread info at the bottom, which is obtained by
clearing the low bits of the stack pointer.

However, when using 64K pages, the stack is smaller than a page,
so we use kmalloc to allocate it, but that doesn't provide the
alignment guarantee we need.

It appeared to work so far... until one enables SLUB debugging
which then returns unaligned pointers.  Ooops...

This fixes it by using a slab cache with enforced alignment.  It
relies on my previous patch that adds a thread_info_cache_init()
callback.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Some architectures need to maintain a kmem cache for thread info
structures.  The next commit adds that to powerpc to fix an alignment
problem.

There is no good arch callback to use to initialize that cache
that I can find, so this adds a new one in the form of a weak
function whose default is empty.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

The PS3 gelic network driver depends on the wake-on-lan support
provided by the PS3 sys manager driver.  Add that dependency
to the GELIC_NET Kconfig option.

Prevents these build errors:

  ps3_gelic_net.c:1277: undefined reference to `.ps3_sys_manager_get_wol'
  ps3_gelic_net.c:1337: undefined reference to `.ps3_sys_manager_set_wol'

CC: Masakazu Mokuno <mokuno@sm.sony.co.jp>
CC: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>

os-area.c requires routines declared in linux/of.h, so should include it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

numa.c requires routines declared in linux/of.h, so should include it.
Signed-off-by: Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

Since 43cc71ee, the platform modalias
is prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable
"macintosh" platform drivers, to re-enable auto loading.

[dbrownell@users.sourceforge.net: registration fixes]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

This reverts commit e4cc5894, as
requested by Roland McGrath, because compat_ptrace_request (added in
commit e16b2781, "ptrace:
compat_ptrace_request siginfo") now handles this case.
Signed-off-by: Paul Mackerras <paulus@samba.org>

Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [patch 7/7] vfs: mountinfo: show dominating group id
  [patch 6/7] vfs: mountinfo: add /proc/<pid>/mountinfo
  [patch 5/7] vfs: mountinfo: allow using process root
  [patch 4/7] vfs: mountinfo: add mount peer group ID
  [patch 3/7] vfs: mountinfo: add mount ID
  [patch 2/7] vfs: mountinfo: add seq_file_root()
  [patch 1/7] vfs: mountinfo: add dentry_path()
  [PATCH] remove unused label in xattr.c (noise from ro-bind)

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6:
  iwlwifi: Fix built-in compilation of iwlcore
  net: Unexport move_addr_to_{kernel,user}
  rt2x00: Select LEDS_CLASS.
  iwlwifi: Select LEDS_CLASS.
  leds: Do not guard NEW_LEDS with HAS_IOMEM
  [IPSEC]: Fix catch-22 with algorithm IDs above 31
  time: Export set_normalized_timespec.
  tcp: Make use of before macro in tcp_input.c
  hamradio: Remove unneeded and deprecated cli()/sti() calls in dmascc.c
  [NETNS]: Remove empty ->init callback.
  [DCCP]: Convert do_gettimeofday() to getnstimeofday().
  [NETNS]: Don't initialize err variable twice.
  [NETNS]: The ip6_fib_timer can work with garbage on net namespace stop.
  [IPV4]: Convert do_gettimeofday() to getnstimeofday().
  [IPV4]: Make icmp_sk_init() static.
  [IPV6]: Make struct ip6_prohibit_entry_template static.
  tcp: Trivial fix to correct function name in a comment in net/ipv4/tcp.c
  [NET]: Expose netdevice dev_id through sysfs
  skbuff: fix missing kernel-doc notation
  [ROSE]: Fix soft lockup wrt. rose_node_list_lock

PNP_MAX_IRQ is 2
If a device invokes pnpacpi_parse_allocated_irqresource() 0, 1, or 2 times, we are happy.
The 3rd time, we will fail and print "pnpacpi: exceeded the max number of IRQ resources: 2"
The 4th and subsequent calls (if this ever happened) would silently scribble on
irq_resource[2], which doesn't actualy exist.
Found-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch fixes problem in Makefile that prevented
built-in compilation of iwlcore

Commit that caused this problem: eadd3c4b ("iwlwifi: make Makefile
more concise")
Signed-off-by: Tomas Winkler <tomas.winkler@intel.com>
Signed-off-by: Yi Zhu <yi.zhu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After the removal of the Solaris binary emulation the exports of 
move_addr_to_{kernel,user} are no longer used.
Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: David S. Miller <davem@davemloft.net>

The LEDS infrastructure itself does not require anything
that a platform dependant upon HAS_IOMEM.

The individual drivers do, but they are properly guarded
with the necessary platform dependencies.

One can even imagine a hypervisor based LED driver that
a platform without HAS_IOMEM might have.
Signed-off-by: David S. Miller <davem@davemloft.net>

Show peer group ID of nearest dominating group that has intersection
with the mount's namespace.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[mszeredi@suse.cz] rewrite and split big patch into managable chunks

/proc/mounts in its current form lacks important information:

 - propagation state
 - root of mount for bind mounts
 - the st_dev value used within the filesystem
 - identifier for each mount and it's parent

It also suffers from the following problems:

 - not easily extendable
 - ambiguity of mountpoints within a chrooted environment
 - doesn't distinguish between filesystem dependent and independent options
 - doesn't distinguish between per mount and per super block options

This patch introduces /proc/<pid>/mountinfo which attempts to address
all these deficiencies.

Code shared between /proc/<pid>/mounts and /proc/<pid>/mountinfo is
extracted into separate functions.

Thanks to Al Viro for the help in getting the design right.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Allow /proc/<pid>/mountinfo to use the root of <pid> to calculate
mountpoints.

 - move definition of 'struct proc_mounts' to <linux/mnt_namespace.h>
 - add the process's namespace and root to this structure
 - pass a pointer to 'struct proc_mounts' into seq_operations

In addition the following cleanups are made:

 - use a common open function for /proc/<pid>/{mounts,mountstat}
 - surround namespace.c part of these proc files with #ifdef CONFIG_PROC_FS
 - make the seq_operations structures const
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a unique ID to each peer group using the IDR infrastructure.  The
identifiers are reused after the peer group dissolves.

The IDR structures are protected by holding namepspace_sem for write
while allocating or deallocating IDs.

IDs are allocated when a previously unshared vfsmount becomes the
first member of a peer group.  When a new member is added to an
existing group, the ID is copied from one of the old members.

IDs are freed when the last member of a peer group is unshared.

Setting the MNT_SHARED flag on members of a subtree is done as a
separate step, after all the IDs have been allocated.  This way an
allocation failure can be cleaned up easilty, without affecting the
propagation state.

Based on design sketch by Al Viro.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a unique ID to each vfsmount using the IDR infrastructure.  The
identifiers are reused after the vfsmount is freed.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Add a new function:

  seq_file_root()

This is similar to seq_path(), but calculates the path relative to the
given root, instead of current->fs->root.  If the path was unreachable
from root, then modify the root parameter to reflect this.
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

[mszeredi@suse.cz] split big patch into managable chunks

Add the following functions:

  dentry_path()
  seq_dentry()

These are similar to d_path() and seq_path().  But instead of
calculating the path within a mount namespace, they calculate the path
from the root of the filesystem to a given dentry, ignoring mounts
completely.
Signed-off-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  [PATCH] get rid of __exit_files(), __exit_fs() and __put_fs_struct()
  [PATCH] proc_readfd_common() race fix
  [PATCH] double-free of inode on alloc_file() failure exit in create_write_pipe()
  [PATCH] teach seq_file to discard entries
  [PATCH] umount_tree() will unhash everything itself
  [PATCH] get rid of more nameidata passing in namespace.c
  [PATCH] switch a bunch of LSM hooks from nameidata to path
  [PATCH] lock exclusively in collect_mounts() and drop_collected_mounts()
  [PATCH] move a bunch of declarations to fs/internal.h

Commit 88452565 ("PCI: clean up resource
alignment management") didn't set the alignment information for the
cardbus window resources, causing their subsequent allocations to fail
miserably with a message like

  yenta_cardbus 0000:15:00.0: device not available because of BAR 7 [100:1ff] collisions
  yenta_cardbus: probe of 0000:15:00.0 failed with error -16

or similar.

This fixes it and clarifies the code a bit too (we used to have to use
the insane PCI bridge alignment logic that put the alignment in the
"start" field, this makes it use the slightly easier-to-understand
size-based alignment, and allows us to set the resource start to zero
until it gets allocated).
Reported-and-tested-by: Jeff Chua <jeff.chua.linux@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Prevent bus_remove_device() from crashing if dev->knode_bus has not been
initialized before it's called.

This can happen if the device_add() ended up breaking out early due to
an error, for example.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Do not refuse to actually register children of suspended devices,
but still warn about attempts to do that.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The only reason to have separated __...() for those was to keep them inlined
for local users in exit.c.  Since Alexey removed the inline on those, there's
no reason whatsoever to keep them around; just collapse with normal variants.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Since we drop the rcu_read_lock inside the loop, we can't assume
that files->fdt will remain unchanged (and not freed) between
iterations.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Duh...  Fortunately, the bug is quite recent (post-2.6.25) and, embarrassingly,
mine ;-/
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>