Pull btrfs fixes from David Sterba:

 - revert memory optimization for scrub blocks, this misses errors in
   2nd and following blocks

 - add exception for ENOMEM as reason for transaction abort to not print
   stack trace, syzbot has reported many

 - zoned fixes:
      - fix locking imbalance during scrub
      - initialize zones for seeding device
      - initialize zones for cloned device structures

 - when looking up device, change assertion to a real check as some of
   the search parameters can be passed by ioctl, reported by syzbot

 - fix error pointer check in self tests

* tag 'for-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: fix locking imbalance on scrub
  btrfs: zoned: initialize device's zone info for seeding
  btrfs: zoned: clone zoned device info when cloning a device
  Revert "btrfs: scrub: use larger block size for data extent scrub"
  btrfs: don't print stack trace when transaction is aborted due to ENOMEM
  btrfs: selftests: fix wrong error check in btrfs_free_dummy_root()
  btrfs: fix match incorrectly in dev_args_match_device

Pull soundwire fixes from Vinod Koul:
 "Two qcom driver fixes for broadcast completion reinit and check for
  outanding writes. And a lone Intel driver fix for clock stop timeout"

* tag 'soundwire-6.1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: qcom: check for outanding writes before doing a read
  soundwire: qcom: reinit broadcast completion
  soundwire: intel: Initialize clock stop timeout

Pull phy fixes from Vinod Koul:
 "A bunch of odd driver fixes and a MAINTAINER email update:

   - Update Kishon's email

   - stms32 error code fix in driver probe

   - tegra: fix for checking valid pointer

   - qcom_qmp: null deref fix

   - sunplus: error check fix

   - ralink: add missing sentinel to table"

* tag 'phy-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: ralink: mt7621-pci: add sentinel to quirks table
  phy: sunplus: Fix an IS_ERR() vs NULL bug in sp_usb_phy_probe
  phy: qcom-qmp-combo: fix NULL-deref on runtime resume
  phy: tegra: xusb: Fix crash during pad power on/down
  phy: stm32: fix an error code in probe
  MAINTAINERS: Update Kishon's email address in GENERIC PHY FRAMEWORK

Pull hwspinlock updates from Bjorn Andersson:
 "I apparently had missed tagging and sending this set of changes out
  during the 6.1 merge window. But did get the associated dts changes
  depending on this merged. The result is a regression in 6.1-rc on the
  affected, older, Qualcomm platforms - in for form of them not booting.

  So while these weren't regression fixes originally, they are now. It's
  not introducing new beahavior, but simply extending the existing new
  Devicetree model, to cover remaining platforms:

   - extend the DeviceTree binding and implementation for the Qualcomm
     hardware spinlock on some older platforms to follow the style of
     the newer ones where the DeviceTree representation does not rely on
     an intermediate syscon node"

* tag 'hwlock-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  dt-bindings: hwlock: qcom-hwspinlock: add syscon to MSM8974
  hwspinlock: qcom: add support for MMIO on older SoCs
  hwspinlock: qcom: correct MMIO max register for newer SoCs
  dt-bindings: hwlock: qcom-hwspinlock: correct example indentation
  dt-bindings: hwlock: qcom-hwspinlock: add support for MMIO on older SoCs

Pull slab fixes from Vlastimil Babka:
 "Most are small fixups as described below.

  The !CONFIG_TRACING fix is a bit bigger and would normally be done in
  the next merge window as part of upcoming hardening changes. But we
  realized it can make the kmalloc waste tracking introduced in this
  window inaccurate, so decided to go with it now.

  Summary:

   - Remove !CONFIG_TRACING kmalloc() wrappers intended to save a
     function call, due to incompatilibity with recently introduced
     wasted space tracking and planned hardening changes.

   - A tracing parameter regression fix, by Kees Cook.

   - Two kernel-doc warning fixups, by Lukas Bulwahn and myself

* tag 'slab-for-6.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab:
  mm, slab: remove duplicate kernel-doc comment for ksize()
  mm/slab_common: Restore passing "caller" for tracing
  mm/slab: remove !CONFIG_TRACING variants of kmalloc_[node_]trace()
  mm/slab_common: repair kernel-doc for __ksize()

Pull audit fix from Paul Moore:
 "A small audit patch to fix an instance of undefined behavior in a
  shift operator caused when shifting a signed value too far, the same
  case as the lsm patch merged previously.

  While the fix is trivial and I can't imagine it causing a problem in a
  backport, I'm not explicitly marking it for stable on the off chance
  that there is some system out there which is relying on some wonky
  unexpected behavior which this patch could break; *if* it does break,
  IMO it's better that to happen in a minor or -rcX release and not in a
  stable backport"

* tag 'audit-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
  audit: fix undefined behavior in bit shift for AUDIT_BIT

Pull lsm fix from Paul Moore:
 "A small capability patch to fix an instance of undefined behavior in a
  shift operator caused when shifting a signed value too far.

  While the fix is trivial and I can't imagine it causing a problem in a
  backport, I'm not explicitly marking it for stable on the off chance
  that there is some system out there which is relying on some wonky
  unexpected behavior which this patch could break; *if* it does break,
  IMO it's better that to happen in a minor or -rcX release and not in a
  stable backport"

* tag 'lsm-pr-20221107' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
  capabilities: fix undefined behavior in bit shift for CAP_TO_MASK

When iterating the VMAs, the maple state needs to be invalidated if the
tree is modified by a split or merge to ensure the maple tree node
contained in the maple state is still valid.  These invalidations were
missed, so add them to the paths which alter the tree.

Reported-by: syzbot+0d2014e4da2ccced5b41@syzkaller.appspotmail.com
Fixes: 69dbe6da (userfaultfd: use maple tree iterator to iterate VMAs)
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'platform-drivers-x86-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "The most important fixes here are a set of fixes for the ACPI
  backlight detection refactor which landed in 6.1.

  These fix regressions reported on some laptop models by making
  acpi_video_backlight_use_native() always return true for now, which in
  essence undoes some of the changes.

  I plan to take another shot at having only 1 /sys/class/backlight
  class device per panel with 6.2, with modified detection heuristics to
  avoid the (known) regressions.

  Highlights:

   - ACPI: video: Fix regressions from 6.1 backlight refactor by making
     acpi_video_backlight_use_native() always return true for now

   - Misc other bugfixes and HW id additions"

* tag 'platform-drivers-x86-v6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: p2sb: Don't fail if unknown CPU is found
  platform/x86/intel/hid: Add some ACPI device IDs
  platform/x86/intel/pmt: Sapphire Rapids PMT errata fix
  platform/x86: hp_wmi: Fix rfkill causing soft blocked wifi
  platform/x86: touchscreen_dmi: Add info for the RCA Cambio W101 v2 2-in-1
  platform/x86: ideapad-laptop: Disable touchpad_switch
  ACPI: video: Add backlight=native DMI quirk for Dell G15 5515
  ACPI: video: Make acpi_video_backlight_use_native() always return true
  ACPI: video: Improve Chromebook checks

Akira reports:

> "make htmldocs" reports duplicate C declaration of ksize() as follows:

> /linux/Documentation/core-api/mm-api:43: ./mm/slab_common.c:1428: WARNING: Duplicate C declaration, also defined at core-api/mm-api:212.
> Declaration is '.. c:function:: size_t ksize (const void *objp)'.

> This is due to the kernel-doc comment for ksize() declaration added in
> include/linux/slab.h by commit 05a94065 ("slab: Introduce
> kmalloc_size_roundup()").

There is an older kernel-doc comment for ksize() definition in
mm/slab_common.c, which is not only duplicated, but also contradicts the
new one - the additional storage discovered by ksize() should not be
used by callers anymore. Delete the old kernel-doc.
Reported-by: Akira Yokosawa <akiyks@gmail.com>
Link: https://lore.kernel.org/all/d33440f6-40cf-9747-3340-e54ffaf7afb8@gmail.com/
Fixes: 05a94065 ("slab: Introduce kmalloc_size_roundup()")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>

If we're doing device replace on a zoned filesystem and discover in
scrub_enumerate_chunks() that we don't have to copy the block group it is
unlocked before it gets skipped.

But as the block group hasn't yet been locked before it leads to a locking
imbalance. To fix this simply remove the unlock.

This was uncovered by fstests' testcase btrfs/163.

Fixes: 9283b9e0 ("btrfs: remove lock protection for BLOCK_GROUP_FLAG_TO_COPY")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When performing seeding on a zoned filesystem it is necessary to
initialize each zoned device's btrfs_zoned_device_info structure,
otherwise mounting the filesystem will cause a NULL pointer dereference.

This was uncovered by fstests' testcase btrfs/163.

CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

When cloning a btrfs_device, we're not cloning the associated
btrfs_zoned_device_info structure of the device in case of a zoned
filesystem.

Later on this leads to a NULL pointer dereference when accessing the
device's zone_info for instance when setting a zone as active.

This was uncovered by fstests' testcase btrfs/161.

CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This reverts commit 786672e9.

[BUG]
Since commit 786672e9 ("btrfs: scrub: use larger block size for data
extent scrub"), btrfs scrub no longer reports errors if the corruption
is not in the first sector of a STRIPE_LEN.

The following script can expose the problem:

  mkfs.btrfs -f $dev
  mount $dev $mnt
  xfs_io -f -c "pwrite -S 0xff 0 8k" $mnt/foobar
  umount $mnt

  # 13631488 is the logical bytenr of above 8K extent
  btrfs-map-logical -l 13631488 -b 4096 $dev
  mirror 1 logical 13631488 physical 13631488 device /dev/test/scratch1

  # Corrupt the 2nd sector of that extent
  xfs_io -f -c "pwrite -S 0x00 13635584 4k" $dev

  mount $dev $mnt
  btrfs scrub start -B $mnt
  scrub done for 54e63f9f-0c30-4c84-a33b-5c56014629b7
  Scrub started:    Mon Nov  7 07:18:27 2022
  Status:           finished
  Duration:         0:00:00
  Total to scrub:   536.00MiB
  Rate:             0.00B/s
  Error summary:    no errors found <<<

[CAUSE]
That offending commit enlarges the data extent scrub size from sector
size to BTRFS_STRIPE_LEN, to avoid extra scrub_block to be allocated.

But unfortunately the data extent scrub is still heavily relying on the
fact that there is only one scrub_sector per scrub_block.

Thus it will only check the first sector, and ignoring the remaining
sectors.

Furthermore the error reporting is not able to handle multiple sectors
either.

[FIX]
For now just revert the offending commit.

The consequence is just extra memory usage during scrub.
We will need a proper change to make the remaining data scrub path to
handle multiple sectors before we enlarging the data scrub size.
Reported-by: Li Zhang <zhanglikernel@gmail.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Add ENOMEM among the error codes that don't print stack trace on
transaction abort. We've got several reports from syzbot that detects
stacks as errors but caused by limiting memory. As this is an artificial
condition we don't need to know where exactly the error happens, the
abort and error cleanup will continue like e.g. for EIO.

As the transaction aborts code needs to be inline in a lot of code, the
implementation cases about minimal bloat. The error codes are in a
separate function and the WARN uses the condition directly. This
increases the code size by 571 bytes on release build.

Alternatives considered: add -ENOMEM among the errors, this increases
size by 2340 bytes, various attempts to combine the WARN and helper
calls, increase by 700 or more bytes.

Example syzbot reports (error -12):

- https://syzkaller.appspot.com/bug?extid=5244d35be7f589cf093e
- https://syzkaller.appspot.com/bug?extid=9c37714c07194d816417Signed-off-by: David Sterba <dsterba@suse.com>

The btrfs_alloc_dummy_root() uses ERR_PTR as the error return value
rather than NULL, if error happened, there will be a NULL pointer
dereference:

  BUG: KASAN: null-ptr-deref in btrfs_free_dummy_root+0x21/0x50 [btrfs]
  Read of size 8 at addr 000000000000002c by task insmod/258926

  CPU: 2 PID: 258926 Comm: insmod Tainted: G        W          6.1.0-rc2+ #5
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x34/0x44
   kasan_report+0xb7/0x140
   kasan_check_range+0x145/0x1a0
   btrfs_free_dummy_root+0x21/0x50 [btrfs]
   btrfs_test_free_space_cache+0x1a8c/0x1add [btrfs]
   btrfs_run_sanity_tests+0x65/0x80 [btrfs]
   init_btrfs_fs+0xec/0x154 [btrfs]
   do_one_initcall+0x87/0x2a0
   do_init_module+0xdf/0x320
   load_module+0x3006/0x3390
   __do_sys_finit_module+0x113/0x1b0
   do_syscall_64+0x35/0x80
 entry_SYSCALL_64_after_hwframe+0x46/0xb0

Fixes: aaedb55b ("Btrfs: add tests for btrfs_get_extent")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

syzkaller found a failed assertion:

  assertion failed: (args->devid != (u64)-1) || args->missing, in fs/btrfs/volumes.c:6921

This can be triggered when we set devid to (u64)-1 by ioctl. In this
case, the match of devid will be skipped and the match of device may
succeed incorrectly.

Patch 562d7b15 introduced this function which is used to match device.
This function contains two matching scenarios, we can distinguish them by
checking the value of args->missing rather than check whether args->devid
and args->uuid is default value.

Reported-by: syzbot+031687116258450f9853@syzkaller.appspotmail.com
Fixes: 562d7b15 ("btrfs: handle device lookup with btrfs_dev_lookup_args")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Signed-off-by: David Sterba <dsterba@suse.com>

We have accessing P2SB from a very few places for quite known hardware.

When a new SoC appears in intel-family.h it's not obvious that it needs
to be added to p2sb.c as well. Instead, provide default BDF and refactor
p2sb_get_devfn() to always succeed. If in the future we would need to
exclude something, we may add a list of unsupported IDs.

Without this change the iTCO on Intel Comet Lake SoCs became unavailable:

  i801_smbus 0000:00:1f.4: failed to create iTCO device

Fixes: 5c7b9167 ("i2c: i801: convert to use common P2SB accessor")
Reported-and-tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20221104154916.35231-1-andriy.shevchenko@linux.intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add INTC1076 (JasonLake), INTC1077 (MeteorLake) and INTC1078 (RaptorLake)
devices IDs.
Signed-off-by: Ivan Hu <ivan.hu@canonical.com>
Link: https://lore.kernel.org/r/20221102020548.5225-1-ivan.hu@canonical.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

On Sapphire Rapids, due to a hardware issue affecting the PUNIT telemetry
region, reads that are not done in QWORD quantities and alignment may
return incorrect data. Use a custom 64-bit copy for this region.
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20221105034228.1376677-1-david.e.box@linux.intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded
strange char "^@" which printed out every second and makes login
nearly impossible. Also the below messages were shown both in console
and journal/dmesg every second:

usb 1-3: Device not responding to setup address.
usb 1-3: device not accepting address 4, error -71
usb 1-3: device descriptor read/all, error -71
usb usb1-port3: unable to enumerate USB device

Wifi is soft blocked by checking rfkill. When unblocked manually,
after few seconds it would be soft blocked again. So I was suspecting
something triggered rfkill to soft block wifi.  At the end it was
fixed by removing hp_wmi module.

The root cause is the way hp-wmi driver handles command 1B on
post-2009 BIOS.  In pre-2009 BIOS, command 1Bh return 0x4 to indicate
that BIOS no longer controls the power for the wireless devices.
Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216468Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20221028155527.7724-1-jorge.lopez2@hp.com
Cc: stable@vger.kernel.org
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Add touchscreen info for the RCA Cambio W101 v2 2-in-1.

Link: https://github.com/onitake/gsl-firmware/discussions/193Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221025141131.509211-1-hdegoede@redhat.com

Ideapads for "Lenovo Yoga 3 Pro 1370" and "ZhaoYang K4e-IML" do not
use EC to switch touchpad.

Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked
unexpectedly.
Signed-off-by: Manyi Li <limanyi@uniontech.com>
Link: https://lore.kernel.org/r/20221018095323.14591-1-limanyi@uniontech.comReviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

The Dell G15 5515 has the WMI interface (and WMI call returns) expected
by the nvidia-wmi-ec-backlight interface. But the backlight class device
registered by the nvidia-wmi-ec-backlight driver does not actually work.

The amdgpu_bl0 native GPU backlight class device does actually work,
add a backlight=native DMI quirk for this.
Reported-by: Iris <pawel.js@protonmail.com>
Reviewed-by: Daniel Dadap <ddadap@nvidia.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
- Add a comment that this needs to be revisited when dynamic-mux
  support gets added (suggested by: Daniel Dadap)

Testing has shown that there are quite a few laptop models which rely
on native backlight control and which do not support ACPI video bus
backlight control, causing __acpi_video_get_backlight_type() to return
vendor. Known Windows laptop models affected by this are:

Acer Aspire 1640
HP Compaq nc6120
IBM ThinkPad X40
System76 Starling Star1

and the following MacBook models are affected too:

Apple MacBook 2.1
Apple MacBook 4.1
Apple MacBook Pro 7.1

the list of affected Windows laptop models is likely just the top of
the iceberg. So for now lets undo the change to not register native
backlight class devices when __acpi_video_get_backlight_type() != native.

Since as part of the backlight-detect refactor the detection code now
relies on the GPU drivers calling acpi_video_backlight_use_native() to
learn that native backlight support is available we cannot just remove
the acpi_video_backlight_use_native() calls from the GPU drivers.

Instead modify acpi_video_backlight_use_native() to always return true
for now. This is meant as a temporary work-around, which will be removed
again when the heuristics from __acpi_video_get_backlight_type() have
been improved so that they will return native on affected models.
Reported-by: Matthew Garrett <mjg59@srcf.ucam.org>
Reported-by: John Warriner <taijitu@cox.net>
Reported-by: Scott Ostrander <sos12_3@hotmail.com>
Reported-by: Matthias Rampke <matthias.rampke@googlemail.com>
Reported-by: Milan Hodoscek <hmilan@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

2 improvements for the Chromebook handling in
acpi_video_get_backlight_type():

1. Also check for the "GOOG000C" ACPI HID used on some models
2. Move the Chromebook check to above the ACPI-video check normally
   Chromebooks don't have ACPI video backlight support, but when
   flashed with upstream coreboot builds they may have ACPI video
   backlight support, but native should still be used/preferred then.
Suggested-by: Mr. Chromebox <mrchromebox@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Pull cxl fixes from Dan Williams:
 "Several fixes for CXL region creation crashes, leaks and failures.

  This is mainly fallout from the original implementation of dynamic CXL
  region creation (instantiate new physical memory pools) that arrived
  in v6.0-rc1.

  Given the theme of "failures in the presence of pass-through decoders"
  this also includes new regression test infrastructure for that case.

  Summary:

   - Fix region creation crash with pass-through decoders

   - Fix region creation crash when no decoder allocation fails

   - Fix region creation crash when scanning regions to enforce the
     increasing physical address order constraint that CXL mandates

   - Fix a memory leak for cxl_pmem_region objects, track 1:N instead of
     1:1 memory-device-to-region associations.

   - Fix a memory leak for cxl_region objects when regions with active
     targets are deleted

   - Fix assignment of NUMA nodes to CXL regions by CFMWS (CXL Window)
     emulated proximity domains.

   - Fix region creation failure for switch attached devices downstream
     of a single-port host-bridge

   - Fix false positive memory leak of cxl_region objects by recycling
     recently used region ids rather than freeing them

   - Add regression test infrastructure for a pass-through decoder
     configuration

   - Fix some mailbox payload handling corner cases"

* tag 'cxl-fixes-for-6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/region: Recycle region ids
  cxl/region: Fix 'distance' calculation with passthrough ports
  tools/testing/cxl: Add a single-port host-bridge regression config
  tools/testing/cxl: Fix some error exits
  cxl/pmem: Fix cxl_pmem_region and cxl_memdev leak
  cxl/region: Fix cxl_region leak, cleanup targets at region delete
  cxl/region: Fix region HPA ordering validation
  cxl/pmem: Use size_add() against integer overflow
  cxl/region: Fix decoder allocation crash
  ACPI: NUMA: Add CXL CFMWS 'nodes' to the possible nodes set
  cxl/pmem: Fix failure to account for 8 byte header for writes to the device LSA.
  cxl/region: Fix null pointer dereference due to pass through decoder commit
  cxl/mbox: Add a check on input payload size

Merge tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon fixes from Guenter Roeck:
 "Fix two regressions:

   - Commit 54cc3dbf ("hwmon: (pmbus) Add regulator supply into
     macro") resulted in regulator undercount when disabling regulators.
     Revert it.

   - The thermal subsystem rework caused the scmi driver to no longer
     register with the thermal subsystem because index values no longer
     match. To fix the problem, the scmi driver now directly registers
     with the thermal subsystem, no longer through the hwmon core"

* tag 'hwmon-for-v6.1-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  Revert "hwmon: (pmbus) Add regulator supply into macro"
  hwmon: (scmi) Register explicitly with Thermal Framework

Pull perf fixes from Borislav Petkov:

 - Add Cooper Lake's stepping to the PEBS guest/host events isolation
   fixed microcode revisions checking quirk

 - Update Icelake and Sapphire Rapids events constraints

 - Use the standard energy unit for Sapphire Rapids in RAPL

 - Fix the hw_breakpoint test to fail more graciously on !SMP configs

* tag 'perf_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel: Add Cooper Lake stepping to isolation_ucodes[]
  perf/x86/intel: Fix pebs event constraints for SPR
  perf/x86/intel: Fix pebs event constraints for ICL
  perf/x86/rapl: Use standard Energy Unit for SPR Dram RAPL domain
  perf/hw_breakpoint: test: Skip the test if dependencies unmet

Pull x86 fixes from Borislav Petkov:

 - Add new Intel CPU models

 - Enforce that TDX guests are successfully loaded only on TDX hardware
   where virtualization exception (#VE) delivery on kernel memory is
   disabled because handling those in all possible cases is "essentially
   impossible"

 - Add the proper include to the syscall wrappers so that BTF can see
   the real pt_regs definition and not only the forward declaration

* tag 'x86_urgent_for_v6.1_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu: Add several Intel server CPU model numbers
  x86/tdx: Panic on bad configs that #VE on "private" memory access
  x86/tdx: Prepare for using "INFO" call for a second purpose
  x86/syscall: Include asm/ptrace.h in syscall_wrapper header

Merge tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Use POSIX-compatible grep options

 - Document git-related tips for reproducible builds

 - Fix a typo in the modpost rule

 - Suppress SIGPIPE error message from gcc-ar and llvm-ar

 - Fix segmentation fault in the menuconfig search

* tag 'kbuild-fixes-v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: fix segmentation fault in menuconfig search
  kbuild: fix SIGPIPE error message for AR=gcc-ar and AR=llvm-ar
  kbuild: fix typo in modpost
  Documentation: kbuild: Add description of git for reproducible builds
  kbuild: use POSIX-compatible grep option

The "caller" argument was accidentally being ignored in a few places
that were recently refactored. Restore these "caller" arguments, instead
of _RET_IP_.

Fixes: 11e9734b ("mm/slab_common: unify NUMA and UMA version of tracepoints")
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: linux-mm@kvack.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>

Pull kvm fixes from Paolo Bonzini:
"ARM:

   - Fix the pKVM stage-1 walker erronously using the stage-2 accessor

   - Correctly convert vcpu->kvm to a hyp pointer when generating an
     exception in a nVHE+MTE configuration

   - Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them

   - Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE

   - Document the boot requirements for FGT when entering the kernel at
     EL1

  x86:

   - Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()

   - Make argument order consistent for kvcalloc()

   - Userspace API fixes for DEBUGCTL and LBRs"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Fix a typo about the usage of kvcalloc()
  KVM: x86: Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()
  KVM: VMX: Ignore guest CPUID for host userspace writes to DEBUGCTL
  KVM: VMX: Fold vmx_supported_debugctl() into vcpu_supported_debugctl()
  KVM: VMX: Advertise PMU LBRs if and only if perf supports LBRs
  arm64: booting: Document our requirements for fine grained traps with SME
  KVM: arm64: Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE
  KVM: Check KVM_CAP_DIRTY_LOG_{RING, RING_ACQ_REL} prior to enabling them
  KVM: arm64: Fix bad dereference on MTE-enabled systems
  KVM: arm64: Use correct accessor to parse stage-1 PTEs

Pull xen fixes from Juergen Gross:
 "One fix for silencing a smatch warning, and a small cleanup patch"

* tag 'for-linus-6.1-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  x86/xen: simplify sysenter and syscall setup
  x86/xen: silence smatch warning in pmu_msr_chk_emulated()

Pull ext4 fixes from Ted Ts'o:
 "Fix a number of bugs, including some regressions, the most serious of
  which was one which would cause online resizes to fail with file
  systems with metadata checksums enabled.

  Also fix a warning caused by the newly added fortify string checker,
  plus some bugs that were found using fuzzed file systems"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: fix fortify warning in fs/ext4/fast_commit.c:1551
  ext4: fix wrong return err in ext4_load_and_init_journal()
  ext4: fix warning in 'ext4_da_release_space'
  ext4: fix BUG_ON() when directory entry has invalid rec_len
  ext4: update the backup superblock's at the end of the online resize

Pull cifs fixes from Steve French:
 "One symlink handling fix and two fixes foir multichannel issues with
  iterating channels, including for oplock breaks when leases are
  disabled"

* tag '6.1-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix use-after-free on the link name
  cifs: avoid unnecessary iteration of tcp sessions
  cifs: always iterate smb sessions using primary channel

Pull `lTracing fixes for 6.1-rc3:

 - Fixed NULL pointer dereference in the ring buffer wait-waiters code
   for machines that have less CPUs than what nr_cpu_ids returns.

   The buffer array is of size nr_cpu_ids, but only the online CPUs get
   initialized.

 - Fixed use after free call in ftrace_shutdown.

 - Fix accounting of if a kprobe is enabled

 - Fix NULL pointer dereference on error path of fprobe rethook_alloc().

 - Fix unregistering of fprobe_kprobe_handler

 - Fix memory leak in kprobe test module

* tag 'trace-v6.1-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: kprobe: Fix memory leak in test_gen_kprobe/kretprobe_cmd()
  tracing/fprobe: Fix to check whether fprobe is registered correctly
  fprobe: Check rethook_alloc() return in rethook initialization
  kprobe: reverse kp->flags when arm_kprobe failed
  ftrace: Fix use-after-free for dynamic ftrace_ops
  ring-buffer: Check for NULL cpu_buffer in ring_buffer_wake_waiters()

Merge tag 'kvmarm-fixes-6.1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

* Fix the pKVM stage-1 walker erronously using the stage-2 accessor

* Correctly convert vcpu->kvm to a hyp pointer when generating
  an exception in a nVHE+MTE configuration

* Check that KVM_CAP_DIRTY_LOG_* are valid before enabling them

* Fix SMPRI_EL1/TPIDR2_EL0 trapping on VHE

* Document the boot requirements for FGT when entering the kernel
  at EL1

x86:
* Use SRCU to protect zap in __kvm_set_or_clear_apicv_inhibit()

* Make argument order consistent for kvcalloc()

* Userspace API fixes for DEBUGCTL and LBRs