- 16 Aug, 2011 1 commit
-
-
Gerard Braad authored
Signed-off-by:
Gerard Braad <me@gbraad.nl> Reviewed-by:
Chris Bagwell <chris@cnpbagwell.com> Signed-off-by:
Ping Cheng <pingc@wacom.com> Signed-off-by:
Dmitry Torokhov <dtor@mail.ru>
-
- 11 Aug, 2011 2 commits
-
-
Axel Lin authored
If kzalloc for kbc fails, then we have NULL pointer dereference while calling input_free_device(kbc->idev) in the error handling. So it is safer to always use the original name, input_dev. Signed-off-by:
Axel Lin <axel.lin@gmail.com> Signed-off-by:
-
Axel Lin authored
input_free_device() should be used if input_register_device() was not called yet or if it failed. Signed-off-by:
-
- 09 Aug, 2011 2 commits
-
-
Joshua V. Dillon authored
Added USB device IDs for MacBookAir4,2 trackpad. Device constants were copied from the MacBookAir3,2 constants. The 4,2 device specification is reportedly unchanged from the 3,2 predecessor and seems to work well. Signed-off-by:
Joshua V Dillon <jvdillon@gmail.com> Signed-off-by:
Chase Douglas <chase.douglas@canonical.com> Signed-off-by:
-
Axel Lin authored
The module device table for of_device_id should use "of" type. Signed-off-by:
-
- 05 Aug, 2011 1 commit
-
-
Deepak Saxena authored
The analog joystick driver is written for x86 systems. This patch updates it to use the PIT_TICK_RATE value instead of CLOCK_TICK_RATE as they are equivalent on x86 and we want to deprecate the latter. Signed-off-by:
Deepak Saxena <dsaxena@linaro.org> Signed-off-by:
-
- 03 Aug, 2011 2 commits
-
-
Michael Hennerich authored
Input close or device disable should not interact with the exported gpiolib functionality. However that's the case. __ad7879_disable() clears the entire AD7879_REG_CTRL2, while it should just power down the ADC and its reference. Signed-off-by:
Michael Hennerich <michael.hennerich@analog.com> Signed-off-by:
-
Tobias Klauser authored
Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
-
- 01 Aug, 2011 1 commit
-
-
Shawn Guo authored
It adds device tree probe support for mma8450 driver. Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Acked-by:
Eric Miao <eric.miao@linaro.org> Acked-by:
Grant Likely <grant.likely@secretlab.ca> Signed-off-by:
-
- 30 Jul, 2011 5 commits
-
-
Tobias Klauser authored
Return -ENOMEM if kzalloc fails in gpio_keys_get_devtree_pdata(). Signed-off-by:
-
Axel Lin authored
Add missing device_remove_file() for dev_attr_time in lm8323_remove(). Also calling device_remove_file() in lm8323_probe() error path to remove sysfs attribute file. Signed-off-by:
-
Rakesh Iyer authored
Fix a constant definition and computation of polling time. [dtor@mail.ru: switched to using DIV_ROUND_UP as was suggested by Thierry Reding <thierry.reding@avionic-design.de>] Signed-off-by:
Rakesh Iyer <riyer@nvidia.com> Signed-off-by:
-
Stephen Rothwell authored
We need to explicitly include module.h since some of its facilities are used. Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Randy Dunlap authored
hgpk.c uses interfaces from linux/module.h, so it should include that file. This fixes build errors. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Signed-off-by:
-
- 27 Jul, 2011 1 commit
-
-
Dmitry Torokhov authored
-
- 25 Jul, 2011 2 commits
-
-
Dmitry Torokhov authored
We were testing wrong bit in the extended capability query. Reported-by:
Daniel Kurtz <djkurtz@chromium.org> Signed-off-by:
-
Rakesh Iyer authored
To support key repeats, keyboard needs to be setup as an autorepeating device. Signed-off-by:
-
- 20 Jul, 2011 2 commits
-
-
Dan Carpenter authored
According to the comments we want to call mutex_lock() here instead of mutex_unlock(). That makes more sense. Signed-off-by:
Dan Carpenter <error27@gmail.com> Signed-off-by:
-
Dan Carpenter authored
We are testing the wrong variable here. I believe tj9->input_dev is always NULL at this point, so probe() will fail. Signed-off-by:
-
- 19 Jul, 2011 4 commits
-
-
Axel Lin authored
The implementation does break from the for loop after we assign 'i' to variable 'found'. Signed-off-by:
-
Axel Lin authored
It's not referenced outside this file so there's no need for it to be in the global name space. Signed-off-by:
-
Axel Lin authored
Make sure we are passing the same cookie in all calls to request_any_context_irq() and free_irq(). Signed-off-by:
-
Axel Lin authored
The implementation in cy8ctmg110_probe() does not properly set reset_pin and irq_pin from platform data. Let's fix it. Signed-off-by:
-
- 13 Jul, 2011 4 commits
-
-
Axel Lin authored
Signed-off-by:
-
Axel Lin authored
i2c_master_send returns negative errno, or else the number of bytes written. Signed-off-by:
-
Axel Lin authored
We only care about if there is a successful match from the table (or no match at all), so let's make dmi_check_system return immediately instead of iterating thorough the whole table. Signed-off-by:
-
Axel Lin authored
We only care about if there is a successful match from the table (or no match at all), so let's make dmi_check_system return immediately instead of iterating thorough the whole table. Make the dmi callback function return 1 then dmi_check_system will return immediately if we have a successful match. Signed-off-by:
-
- 10 Jul, 2011 3 commits
-
-
Dmitry Torokhov authored
This reduces amount #ifdeds in the code. Signed-off-by: -
David Jander authored
This patch enables fetching configuration data, which is normally provided via platform_data, from the device-tree instead. If the device is configured from device-tree data, the platform_data struct is not used, and button data needs to be allocated dynamically. Big part of this patch deals with confining pdata usage to the probe function, to make this possible. Signed-off-by:
David Jander <david@protonic.nl> Signed-off-by:
-
Edwin van Vliet authored
Constant AIPTEK_TOOL_BUTTON_PEN_MODE was defined twice. Signed-off-by:
Edwin van Vliet <edwin@cheatah.nl> Reviewed-by:
Jesper Juhl <jj@chaosbits.net> Signed-off-by:
-
- 09 Jul, 2011 1 commit
-
-
Dmitry Torokhov authored
Newer Synaptics firmware allows to query minimum coordinates reported by the device, let's use this data. Acked-by:
Henrik Rydberg <rydberg@euromail.se> Signed-off-by:
-
- 07 Jul, 2011 9 commits
-
-
Daniel Kurtz authored
AGM packets contain valid button bits, too. This patch refactors packet processing to parse button bits in AGM packets. However, they aren't actually used or reported. The point is to more completely process AGM packets, and prepare for future patches that may actually use AGM packet button bits. Signed-off-by:
-
Daniel Kurtz authored
Signed-off-by:
-
Daniel Kurtz authored
Synaptics touchpads indicate via a capability bit when they perform reduced filtering on position data. In such a case, use a non-zero fuzz value. Fuzz = 8 was chosen empirically by observing the raw position data reported by a clickpad indicating it had reduced filtering. Signed-off-by:
-
Daniel Kurtz authored
Set resolution for MT_POSITION_X and MT_POSITION_Y to match ABS_X and ABS_Y, respectively. Signed-off-by:
-
Ping Cheng authored
The old code may call input_sync() without sending any other events. While it will be suppressed by the input core not calling it at all is still cheaper. Signed-off-by:
-
Ping Cheng authored
Bamboo touch sets BTN_BACK, BTN_FORWARD, BTN_LEFT, and BTN_RIGHT as the default button events for tablet buttons. Change Graphire4 and old Bamboo to the same settings. Signed-off-by:
-
Ping Cheng authored
With the removal of BTN_TOOL_FINGER for tablet buttons and expresskeys, serial number is needed to distingush if the events were from a regular tool (stylus, eraser, or mouse) or the attribures (buttons, strips, or wheels) on the tablet since there are overlapped events between the tools and the tablet attributes. Signed-off-by:
-
Ping Cheng authored
BTN_TOOL_FINGER was designed to indicate a single finger touch. Remove the lines that borrowed this type for expresskeys and tablet buttons. Signed-off-by:
-
Chris Hudson authored
Signed-off-by:
Chris Hudson <chudson@kionix.com> Signed-off-by:
-
