test_ksyms_module fails to emit a kfunc call targeting a module on
s390x, because the verifier stores the difference between kfunc
address and __bpf_call_base in bpf_insn.imm, which is s32, and modules
are roughly (1 << 42) bytes away from the kernel on s390x.

Fix by keeping BTF id in bpf_insn.imm for BPF_PSEUDO_KFUNC_CALLs,
and storing the absolute address in bpf_kfunc_desc.

Introduce bpf_jit_supports_far_kfunc_call() in order to limit this new
behavior to the s390x JIT. Otherwise other JITs need to be modified,
which is not desired.

Introduce bpf_get_kfunc_addr() instead of exposing both
find_kfunc_desc() and struct bpf_kfunc_desc.

In addition to sorting kfuncs by imm, also sort them by offset, in
order to handle conflicting imms from different modules. Do this on
all architectures in order to simplify code.

Factor out resolving specialized kfuncs (XPD and dynptr) from
fixup_kfunc_call(). This was required in the first place, because
fixup_kfunc_call() uses find_kfunc_desc(), which returns a const
pointer, so it's not possible to modify kfunc addr without stripping
const, which is not nice. It also removes repetition of code like:

	if (bpf_jit_supports_far_kfunc_call())
		desc->addr = func;
	else
		insn->imm = BPF_CALL_IMM(func);

and separates kfunc_desc_tab fixups from kfunc_call fixups.
Suggested-by: Jiri Olsa <olsajiri@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230412230632.885985-1-iii@linux.ibm.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The recursion check in __bpf_prog_enter* and __bpf_prog_exit*
leave preempt_count_{sub,add} unprotected. When attaching trampoline to
them we get panic as follows,

[  867.843050] BUG: TASK stack guard page was hit at 0000000009d325cf (stack is 0000000046a46a15..00000000537e7b28)
[  867.843064] stack guard page: 0000 [#1] PREEMPT SMP NOPTI
[  867.843067] CPU: 8 PID: 11009 Comm: trace Kdump: loaded Not tainted 6.2.0+ #4
[  867.843100] Call Trace:
[  867.843101]  <TASK>
[  867.843104]  asm_exc_int3+0x3a/0x40
[  867.843108] RIP: 0010:preempt_count_sub+0x1/0xa0
[  867.843135]  __bpf_prog_enter_recur+0x17/0x90
[  867.843148]  bpf_trampoline_6442468108_0+0x2e/0x1000
[  867.843154]  ? preempt_count_sub+0x1/0xa0
[  867.843157]  preempt_count_sub+0x5/0xa0
[  867.843159]  ? migrate_enable+0xac/0xf0
[  867.843164]  __bpf_prog_exit_recur+0x2d/0x40
[  867.843168]  bpf_trampoline_6442468108_0+0x55/0x1000
...
[  867.843788]  preempt_count_sub+0x5/0xa0
[  867.843793]  ? migrate_enable+0xac/0xf0
[  867.843829]  __bpf_prog_exit_recur+0x2d/0x40
[  867.843837] BUG: IRQ stack guard page was hit at 0000000099bd8228 (stack is 00000000b23e2bc4..000000006d95af35)
[  867.843841] BUG: IRQ stack guard page was hit at 000000005ae07924 (stack is 00000000ffd69623..0000000014eb594c)
[  867.843843] BUG: IRQ stack guard page was hit at 00000000028320f0 (stack is 00000000034b6438..0000000078d1bcec)
[  867.843842]  bpf_trampoline_6442468108_0+0x55/0x1000
...

That is because in __bpf_prog_exit_recur, the preempt_count_{sub,add} are
called after prog->active is decreased.

Fixing this by adding these two functions into btf ids deny list.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Yafang <laoar.shao@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jiri Olsa <olsajiri@gmail.com>
Acked-by: Hao Luo <haoluo@google.com>
Link: https://lore.kernel.org/r/20230413025248.79764-1-laoar.shao@gmail.comSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Some distros ship with older vm_sockets.h that doesn't have VMADDR_CID_LOCAL
which causes selftests build to fail:
/tmp/work/bpf/bpf/tools/testing/selftests/bpf/prog_tests/sockmap_listen.c:261:18: error: ‘VMADDR_CID_LOCAL’ undeclared (first use in this function); did you mean ‘VMADDR_CID_HOST’?
    261 |  addr->svm_cid = VMADDR_CID_LOCAL;
        |                  ^~~~~~~~~~~~~~~~
        |                  VMADDR_CID_HOST

Workaround this issue by defining it on demand.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Fix merge conflict between bpf/bpf-next trees due to change of arguments in SYS() macro.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

====================
pull-request: bpf-next 2023-04-13

We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).

The main changes are:

1) Rework BPF verifier log behavior and implement it as a rotating log
   by default with the option to retain old-style fixed log behavior,
   from Andrii Nakryiko.

2) Adds support for using {FOU,GUE} encap with an ipip device operating
   in collect_md mode and add a set of BPF kfuncs for controlling encap
   params, from Christian Ehrig.

3) Allow BPF programs to detect at load time whether a particular kfunc
   exists or not, and also add support for this in light skeleton,
   from Alexei Starovoitov.

4) Optimize hashmap lookups when key size is multiple of 4,
   from Anton Protopopov.

5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
   tasks to be stored in BPF maps, from David Vernet.

6) Add support for stashing local BPF kptr into a map value via
   bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
   for new cgroups, from Dave Marchevsky.

7) Fix BTF handling of is_int_ptr to skip modifiers to work around
   tracing issues where a program cannot be attached, from Feng Zhou.

8) Migrate a big portion of test_verifier unit tests over to
   test_progs -a verifier_* via inline asm to ease {read,debug}ability,
   from Eduard Zingerman.

9) Several updates to the instruction-set.rst documentation
   which is subject to future IETF standardization
   (https://lwn.net/Articles/926882/), from Dave Thaler.

10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
    known bits information propagation, from Daniel Borkmann.

11) Add skb bitfield compaction work related to BPF with the overall goal
    to make more of the sk_buff bits optional, from Jakub Kicinski.

12) BPF selftest cleanups for build id extraction which stand on its own
    from the upcoming integration work of build id into struct file object,
    from Jiri Olsa.

13) Add fixes and optimizations for xsk descriptor validation and several
    selftest improvements for xsk sockets, from Kal Conley.

14) Add BPF links for struct_ops and enable switching implementations
    of BPF TCP cong-ctls under a given name by replacing backing
    struct_ops map, from Kui-Feng Lee.

15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
    offset stack read as earlier Spectre checks cover this,
    from Luis Gerhorst.

16) Fix issues in copy_from_user_nofault() for BPF and other tracers
    to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
    and Alexei Starovoitov.

17) Add --json-summary option to test_progs in order for CI tooling to
    ease parsing of test results, from Manu Bretelle.

18) Batch of improvements and refactoring to prep for upcoming
    bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
    from Martin KaFai Lau.

19) Improve bpftool's visual program dump which produces the control
    flow graph in a DOT format by adding C source inline annotations,
    from Quentin Monnet.

20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
    the module name from BTF of the target and searching kallsyms of
    the correct module, from Viktor Malik.

21) Improve BPF verifier handling of '<const> <cond> <non_const>'
    to better detect whether in particular jmp32 branches are taken,
    from Yonghong Song.

22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
    A built-in cc or one from a kernel module is already able to write
    to app_limited, from Yixin Shen.

Conflicts:

Documentation/bpf/bpf_devel_QA.rst
  b7abcd9c ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
  0f10f647 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/

include/net/ip_tunnels.h
  bc9d003d ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
  ac931d4c ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/

net/bpf/test_run.c
  e5995bc7 ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
  294635a8 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================

Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Conflicts:

tools/testing/selftests/net/config
  62199e3f ("selftests: net: Add VXLAN MDB test")
  3a0385be ("selftests: add the missing CONFIG_IP_SCTP in net config")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, and bluetooth.

  Not all that quiet given spring celebrations, but "current" fixes are
  thinning out, which is encouraging. One outstanding regression in the
  mlx5 driver when using old FW, not blocking but we're pushing for a
  fix.

  Current release - new code bugs:

   - eth: enetc: workaround for unresponsive pMAC after receiving
     express traffic

  Previous releases - regressions:

   - rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
     pid/seq fields 0 for backward compatibility

  Previous releases - always broken:

   - sctp: fix a potential overflow in sctp_ifwdtsn_skip

   - mptcp:
      - use mptcp_schedule_work instead of open-coding it and make the
        worker check stricter, to avoid scheduling work on closed
        sockets
      - fix NULL pointer dereference on fastopen early fallback

   - skbuff: fix memory corruption due to a race between skb coalescing
     and releasing clones confusing page_pool reference counting

   - bonding: fix neighbor solicitation validation on backup slaves

   - bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp

   - bpf: arm64: fixed a BTI error on returning to patched function

   - openvswitch: fix race on port output leading to inf loop

   - sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
     returning a different errno than expected

   - phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove

   - Bluetooth: fix printing errors if LE Connection times out

   - Bluetooth: assorted UaF, deadlock and data race fixes

   - eth: macb: fix memory corruption in extended buffer descriptor mode

  Misc:

   - adjust the XDP Rx flow hash API to also include the protocol layers
     over which the hash was computed"

* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
  mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
  veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
  mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
  xdp: rss hash types representation
  selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
  skbuff: Fix a race between coalescing and releasing SKBs
  net: macb: fix a memory corruption in extended buffer descriptor mode
  selftests: add the missing CONFIG_IP_SCTP in net config
  udp6: fix potential access to stale information
  selftests: openvswitch: adjust datapath NL message declaration
  selftests: mptcp: userspace pm: uniform verify events
  mptcp: fix NULL pointer dereference on fastopen early fallback
  mptcp: stricter state check in mptcp_worker
  mptcp: use mptcp_schedule_work instead of open-coding it
  net: enetc: workaround for unresponsive pMAC after receiving express traffic
  sctp: fix a potential overflow in sctp_ifwdtsn_skip
  net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
  rtnetlink: Restore RTM_NEW/DELLINK notification behavior
  net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
  ...

Pull devicetree fixes from Rob Herring:

 - Fix interaction between fw_devlink and DT overlays causing devices to
   not be probed

 - Fix the compatible string for loongson,cpu-interrupt-controller

* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  treewide: Fix probing of devices in DT overlays
  dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible

Pull pin control fix from Linus Walleij:
 "This is just a revert of the AMD fix, because the fix broke some
  laptops. We are working on a proper solution"

* tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: amd: Disable and mask interrupts on resume"

Pull drm fixes from Daniel Vetter:

 - two fbcon regressions

 - amdgpu: dp mst, smu13

 - i915: dual link dsi for tgl+

 - armada, nouveau, drm/sched, fbmem

* tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm:
  fbcon: set_con2fb_map needs to set con2fb_map!
  fbcon: Fix error paths in set_con2fb_map
  drm/amd/pm: correct the pcie link state check for SMU13
  drm/amd/pm: correct SMU13.0.7 max shader clock reporting
  drm/amd/pm: correct SMU13.0.7 pstate profiling clock settings
  drm/amd/display: Pass the right info to drm_dp_remove_payload
  drm/armada: Fix a potential double free in an error handling path
  fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace
  drm/nouveau/fb: add missing sysmen flush callbacks
  drm/i915/dsi: fix DSS CTL register offsets for TGL+
  drm/scheduler: Fix UAF race in drm_sched_entity_push_job()

Daniel Borkmann says:

====================
pull-request: bpf 2023-04-13

We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 14 files changed, 205 insertions(+), 38 deletions(-).

The main changes are:

1) One late straggler fix on the XDP hints side which fixes
   bpf_xdp_metadata_rx_hash kfunc API before the release goes out
   in order to provide information on the RSS hash type,
   from Jesper Dangaard Brouer.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
  mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
  veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
  mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
  xdp: rss hash types representation
  selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
====================

Link: https://lore.kernel.org/r/20230413192939.10202-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Short summary of fixes pull:

 * armada: Fix double free
 * fb: Clear FB_ACTIVATE_KD_TEXT in ioctl
 * nouveau: Add missing callbacks
 * scheduler: Fix use-after-free error
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413184233.GA8148@linux-uq9g

syzbot reported a splat and bisected it to recent commit ed17aa92 ("bpf,
sockmap: fix deadlocks in the sockhash and sockmap"):

  [...]
  WARNING: CPU: 1 PID: 9280 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
  Modules linked in:
  CPU: 1 PID: 9280 Comm: syz-executor.1 Not tainted 6.2.0-syzkaller-13249-gd319f344 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
  RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
  [...]
  Call Trace:
  <TASK>
  spin_unlock_bh include/linux/spinlock.h:395 [inline]
  sock_map_del_link+0x2ea/0x510 net/core/sock_map.c:165
  sock_map_unref+0xb0/0x1d0 net/core/sock_map.c:184
  sock_hash_delete_elem+0x1ec/0x2a0 net/core/sock_map.c:945
  map_delete_elem kernel/bpf/syscall.c:1536 [inline]
  __sys_bpf+0x2edc/0x53e0 kernel/bpf/syscall.c:5053
  __do_sys_bpf kernel/bpf/syscall.c:5166 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:5164 [inline]
  __x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5164
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  RIP: 0033:0x7fe8f7c8c169
  </TASK>
  [...]

Revert for now until we have a proper solution.

Fixes: ed17aa92 ("bpf, sockmap: fix deadlocks in the sockhash and sockmap")
Reported-by: syzbot+49f6cef45247ff249498@syzkaller.appspotmail.com
Cc: Hsin-Wei Hung <hsinweih@uci.edu>
Cc: Xin Liu <liuxin350@huawei.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/000000000000f1db9605f939720e@google.com/

Jesper Dangaard Brouer says:

====================

Current API for bpf_xdp_metadata_rx_hash() returns the raw RSS hash value,
but doesn't provide information on the RSS hash type (part of 6.3-rc).

This patchset proposal is to change the function call signature via adding
a pointer value argument for providing the RSS hash type.

Patchset also removes all bpf_printk's from xdp_hw_metadata program
that we expect driver developers to use. Instead counters are introduced
for relaying e.g. skip and fail info.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Update BPF selftests to use the new RSS type argument for kfunc
bpf_xdp_metadata_rx_hash.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132894068.340624.8914711185697163690.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via matching individual Completion Queue Entry (CQE) status bits.

Fixes: ab46182d ("net/mlx4_en: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132893562.340624.12779118462402031248.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type.

The veth driver currently only support XDP-hints based on SKB code path.
The SKB have lost information about the RSS hash type, by compressing
the information down to a single bitfield skb->l4_hash, that only knows
if this was a L4 hash value.

In preparation for veth, the xdp_rss_hash_type have an L4 indication
bit that allow us to return a meaningful L4 indication when working
with SKB based packets.

Fixes: 306531f0 ("veth: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132893055.340624.16209448340644513469.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via mapping table.

The mlx5 hardware can also identify and RSS hash IPSEC.  This indicate
hash includes SPI (Security Parameters Index) as part of IPSEC hash.

Extend xdp core enum xdp_rss_hash_type with IPSEC hash type.

Fixes: bc8d405b ("net/mlx5e: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892548.340624.11185734579430124869.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.

Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.

The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.

This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.

The RSS type implementations for each driver comes as separate patches.

Fixes: 3d76a4d3 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892042.340624.582563003880565460.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The tool xdp_hw_metadata can be used by driver developers
implementing XDP-hints metadata kfuncs.

Remove all bpf_printk calls, as the tool already transfers all the
XDP-hints related information via metadata area to AF_XDP
userspace process.

Add counters for providing remaining information about failure and
skipped packet events.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132891533.340624.7313781245316405141.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

I got really badly confused in d443d938 ("fbcon: move more common
code into fb_open()") because we set the con2fb_map before the failure
points, which didn't look good.

But in trying to fix that I moved the assignment into the wrong path -
we need to do it for _all_ vc we take over, not just the first one
(which additionally requires the call to con2fb_acquire_newinfo).

I've figured this out because of a KASAN bug report, where the
fbcon_registered_fb and fbcon_display arrays went out of sync in
fbcon_mode_deleted() because the con2fb_map pointed at the old
fb_info, but the modes and everything was updated for the new one.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: d443d938 ("fbcon: move more common code into fb_open()")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+

This is a regressoin introduced in b07db395 ("fbcon: Ditch error
handling for con2fb_release_oldinfo"). I failed to realize what the if
(!err) checks. The mentioned commit was dropping the
con2fb_release_oldinfo() return value but the if (!err) was also
checking whether the con2fb_acquire_newinfo() function call above
failed or not.

Fix this with an early return statement.

Note that there's still a difference compared to the orginal state of
the code, the below lines are now also skipped on error:

	if (!search_fb_in_map(info_idx))
		info_idx = newidx;

These are only needed when we've actually thrown out an old fb_info
from the console mappings, which only happens later on.

Also move the fbcon_add_cursor_work() call into the same if block,
it's all protected by console_lock so doesn't matter when we set up
the blinking cursor delayed work anyway. This further simplifies the
control flow and allows us to ditch the found local variable.

v2: Clarify commit message (Javier)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: b07db395 ("fbcon: Ditch error handling for con2fb_release_oldinfo")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+

Commit 1effe8ca ("skbuff: fix coalescing for page_pool fragment
recycling") allowed coalescing to proceed with non page pool page and page
pool page when @from is cloned, i.e.

to->pp_recycle    --> false
from->pp_recycle  --> true
skb_cloned(from)  --> true

However, it actually requires skb_cloned(@from) to hold true until
coalescing finishes in this situation. If the other cloned SKB is
released while the merging is in process, from_shinfo->nr_frags will be
set to 0 toward the end of the function, causing the increment of frag
page _refcount to be unexpectedly skipped resulting in inconsistent
reference counts. Later when SKB(@to) is released, it frees the page
directly even though the page pool page is still in use, leading to
use-after-free or double-free errors. So it should be prohibited.

The double-free error message below prompted us to investigate:
BUG: Bad page state in process swapper/1  pfn:0e0d1
page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000
index:0x2 pfn:0xe0d1
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000
raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount

CPU: 1 PID: 0 Comm: swapper/1 Tainted: G            E      6.2.0+
Call Trace:
 <IRQ>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_pcp_prepare+0x260/0x2f0
free_unref_page+0x20/0x1c0
skb_release_data+0x10b/0x1a0
napi_consume_skb+0x56/0x150
net_rx_action+0xf0/0x350
? __napi_schedule+0x79/0x90
__do_softirq+0xc8/0x2b1
__irq_exit_rcu+0xb9/0xf0
common_interrupt+0x82/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0xb/0x20

Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

For quite some time we were chasing a bug which looked like a sudden
permanent failure of networking and mmc on some of our devices.
The bug was very sensitive to any software changes and even more to
any kernel debug options.

Finally we got a setup where the problem was reproducible with
CONFIG_DMA_API_DEBUG=y and it revealed the issue with the rx dma:

[   16.992082] ------------[ cut here ]------------
[   16.996779] DMA-API: macb ff0b0000.ethernet: device driver tries to free DMA memory it has not allocated [device address=0x0000000875e3e244] [size=1536 bytes]
[   17.011049] WARNING: CPU: 0 PID: 85 at kernel/dma/debug.c:1011 check_unmap+0x6a0/0x900
[   17.018977] Modules linked in: xxxxx
[   17.038823] CPU: 0 PID: 85 Comm: irq/55-8000f000 Not tainted 5.4.0 #28
[   17.045345] Hardware name: xxxxx
[   17.049528] pstate: 60000005 (nZCv daif -PAN -UAO)
[   17.054322] pc : check_unmap+0x6a0/0x900
[   17.058243] lr : check_unmap+0x6a0/0x900
[   17.062163] sp : ffffffc010003c40
[   17.065470] x29: ffffffc010003c40 x28: 000000004000c03c
[   17.070783] x27: ffffffc010da7048 x26: ffffff8878e38800
[   17.076095] x25: ffffff8879d22810 x24: ffffffc010003cc8
[   17.081407] x23: 0000000000000000 x22: ffffffc010a08750
[   17.086719] x21: ffffff8878e3c7c0 x20: ffffffc010acb000
[   17.092032] x19: 0000000875e3e244 x18: 0000000000000010
[   17.097343] x17: 0000000000000000 x16: 0000000000000000
[   17.102647] x15: ffffff8879e4a988 x14: 0720072007200720
[   17.107959] x13: 0720072007200720 x12: 0720072007200720
[   17.113261] x11: 0720072007200720 x10: 0720072007200720
[   17.118565] x9 : 0720072007200720 x8 : 000000000000022d
[   17.123869] x7 : 0000000000000015 x6 : 0000000000000098
[   17.129173] x5 : 0000000000000000 x4 : 0000000000000000
[   17.134475] x3 : 00000000ffffffff x2 : ffffffc010a1d370
[   17.139778] x1 : b420c9d75d27bb00 x0 : 0000000000000000
[   17.145082] Call trace:
[   17.147524]  check_unmap+0x6a0/0x900
[   17.151091]  debug_dma_unmap_page+0x88/0x90
[   17.155266]  gem_rx+0x114/0x2f0
[   17.158396]  macb_poll+0x58/0x100
[   17.161705]  net_rx_action+0x118/0x400
[   17.165445]  __do_softirq+0x138/0x36c
[   17.169100]  irq_exit+0x98/0xc0
[   17.172234]  __handle_domain_irq+0x64/0xc0
[   17.176320]  gic_handle_irq+0x5c/0xc0
[   17.179974]  el1_irq+0xb8/0x140
[   17.183109]  xiic_process+0x5c/0xe30
[   17.186677]  irq_thread_fn+0x28/0x90
[   17.190244]  irq_thread+0x208/0x2a0
[   17.193724]  kthread+0x130/0x140
[   17.196945]  ret_from_fork+0x10/0x20
[   17.200510] ---[ end trace 7240980785f81d6f ]---

[  237.021490] ------------[ cut here ]------------
[  237.026129] DMA-API: exceeded 7 overlapping mappings of cacheline 0x0000000021d79e7b
[  237.033886] WARNING: CPU: 0 PID: 0 at kernel/dma/debug.c:499 add_dma_entry+0x214/0x240
[  237.041802] Modules linked in: xxxxx
[  237.061637] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W         5.4.0 #28
[  237.068941] Hardware name: xxxxx
[  237.073116] pstate: 80000085 (Nzcv daIf -PAN -UAO)
[  237.077900] pc : add_dma_entry+0x214/0x240
[  237.081986] lr : add_dma_entry+0x214/0x240
[  237.086072] sp : ffffffc010003c30
[  237.089379] x29: ffffffc010003c30 x28: ffffff8878a0be00
[  237.094683] x27: 0000000000000180 x26: ffffff8878e387c0
[  237.099987] x25: 0000000000000002 x24: 0000000000000000
[  237.105290] x23: 000000000000003b x22: ffffffc010a0fa00
[  237.110594] x21: 0000000021d79e7b x20: ffffffc010abe600
[  237.115897] x19: 00000000ffffffef x18: 0000000000000010
[  237.121201] x17: 0000000000000000 x16: 0000000000000000
[  237.126504] x15: ffffffc010a0fdc8 x14: 0720072007200720
[  237.131807] x13: 0720072007200720 x12: 0720072007200720
[  237.137111] x11: 0720072007200720 x10: 0720072007200720
[  237.142415] x9 : 0720072007200720 x8 : 0000000000000259
[  237.147718] x7 : 0000000000000001 x6 : 0000000000000000
[  237.153022] x5 : ffffffc010003a20 x4 : 0000000000000001
[  237.158325] x3 : 0000000000000006 x2 : 0000000000000007
[  237.163628] x1 : 8ac721b3a7dc1c00 x0 : 0000000000000000
[  237.168932] Call trace:
[  237.171373]  add_dma_entry+0x214/0x240
[  237.175115]  debug_dma_map_page+0xf8/0x120
[  237.179203]  gem_rx_refill+0x190/0x280
[  237.182942]  gem_rx+0x224/0x2f0
[  237.186075]  macb_poll+0x58/0x100
[  237.189384]  net_rx_action+0x118/0x400
[  237.193125]  __do_softirq+0x138/0x36c
[  237.196780]  irq_exit+0x98/0xc0
[  237.199914]  __handle_domain_irq+0x64/0xc0
[  237.204000]  gic_handle_irq+0x5c/0xc0
[  237.207654]  el1_irq+0xb8/0x140
[  237.210789]  arch_cpu_idle+0x40/0x200
[  237.214444]  default_idle_call+0x18/0x30
[  237.218359]  do_idle+0x200/0x280
[  237.221578]  cpu_startup_entry+0x20/0x30
[  237.225493]  rest_init+0xe4/0xf0
[  237.228713]  arch_call_rest_init+0xc/0x14
[  237.232714]  start_kernel+0x47c/0x4a8
[  237.236367] ---[ end trace 7240980785f81d70 ]---

Lars was fast to find an explanation: according to the datasheet
bit 2 of the rx buffer descriptor entry has a different meaning in the
extended mode:
  Address [2] of beginning of buffer, or
  in extended buffer descriptor mode (DMA configuration register [28] = 1),
  indicates a valid timestamp in the buffer descriptor entry.

The macb driver didn't mask this bit while getting an address and it
eventually caused a memory corruption and a dma failure.

The problem is resolved by explicitly clearing the problematic bit
if hw timestamping is used.

Fixes: 7b429614 ("net: macb: Add support for PTP timestamps in DMA descriptors")
Signed-off-by: Roman Gushchin <roman.gushchin@linux.dev>
Co-developed-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20230412232144.770336-1-roman.gushchin@linux.devSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The selftest sctp_vrf needs CONFIG_IP_SCTP set in config
when building the kernel, so add it.

Fixes: a61bd7b9 ("selftests: add a selftest for sctp vrf")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: Sridhar Samudrala <sridhar.samudrala@intel.com>
Link: https://lore.kernel.org/r/61dddebc4d2dd98fe7fb145e24d4b2430e42b572.1681312386.git.lucien.xin@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

lena wang reported an issue caused by udpv6_sendmsg()
mangling msg->msg_name and msg->msg_namelen, which
are later read from ____sys_sendmsg() :

	/*
	 * If this is sendmmsg() and sending to current destination address was
	 * successful, remember it.
	 */
	if (used_address && err >= 0) {
		used_address->name_len = msg_sys->msg_namelen;
		if (msg_sys->msg_name)
			memcpy(&used_address->name, msg_sys->msg_name,
			       used_address->name_len);
	}

udpv6_sendmsg() wants to pretend the remote address family
is AF_INET in order to call udp_sendmsg().

A fix would be to modify the address in-place, instead
of using a local variable, but this could have other side effects.

Instead, restore initial values before we return from udpv6_sendmsg().

Fixes: c71d8ebe ("net: Fix security_socket_sendmsg() bypass problem.")
Reported-by: lena wang <lena.wang@mediatek.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20230412130308.1202254-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The netlink message for creating a new datapath takes an array
of ports for the PID creation.  This shouldn't cause much issue
but correct it for future cases where we need to do decode of
datapath information that could include the per-cpu PID map.

Fixes: 25f16c87 ("selftests: add openvswitch selftest suite")
Signed-off-by: Aaron Conole <aconole@redhat.com>
Link: https://lore.kernel.org/r/20230412115828.3991806-1-aconole@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
mptcp: more fixes for 6.3

Patch 1 avoids scheduling the MPTCP worker on a closed socket on some
edge cases. It fixes issues that can be visible from v5.11.

Patch 2 makes sure the MPTCP worker doesn't try to manipulate
disconnected sockets. This is also a fix for an issue that can be
visible from v5.11.

Patch 3 fixes a NULL pointer dereference when MPTCP FastOpen is used
and an early fallback is done. A fix for v6.2.

Patch 4 improves the stability of the userspace PM selftest for a
subtest added in v6.2.
====================

Link: https://lore.kernel.org/r/20230411-upstream-net-20230411-mptcp-fixes-v1-0-ca540f3ef986@tessares.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simply adding a "sleep" before checking something is usually not a good
idea because the time that has been picked can not be enough or too
much. The best is to wait for events with a timeout.

In this selftest, 'sleep 0.5' is used more than 40 times. It is always
used before calling a 'verify_*' function except for this
verify_listener_events which has been added later.

At the end, using all these 'sleep 0.5' seems to work: the slow CIs
don't complain so far. Also because it doesn't take too much time, we
can just add two more 'sleep 0.5' to uniform what is done before calling
a 'verify_*' function. For the same reasons, we can also delay a bigger
refactoring to replace all these 'sleep 0.5' by functions waiting for
events instead of waiting for a fix time and hope for the best.

Fixes: 6c73008a ("selftests: mptcp: listener test for userspace PM")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In case of early fallback to TCP, subflow_syn_recv_sock() deletes
the subflow context before returning the newly allocated sock to
the caller.

The fastopen path does not cope with the above unconditionally
dereferencing the subflow context.

Fixes: 36b122ba ("mptcp: add subflow_v(4,6)_send_synack()")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As reported by Christoph, the mptcp protocol can run the
worker when the relevant msk socket is in an unexpected state:

connect()
// incoming reset + fastclose
// the mptcp worker is scheduled
mptcp_disconnect()
// msk is now CLOSED
listen()
mptcp_worker()

Leading to the following splat:

divide error: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
Workqueue: events mptcp_worker
RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018
RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293
RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004
RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000
R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 tcp_select_window net/ipv4/tcp_output.c:262 [inline]
 __tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345
 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline]
 tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459
 mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline]
 mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705
 process_one_work+0x3bd/0x950 kernel/workqueue.c:2390
 worker_thread+0x5b/0x610 kernel/workqueue.c:2537
 kthread+0x138/0x170 kernel/kthread.c:376
 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308
 </TASK>

This change addresses the issue explicitly checking for bad states
before running the mptcp worker.

Fixes: e16163b6 ("mptcp: refactor shutdown and close")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/374Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Tested-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Beyond reducing code duplication this also avoids scheduling
the mptcp_worker on a closed socket on some edge scenarios.

The addressed issue is actually older than the blamed commit
below, but this fix needs it as a pre-requisite.

Fixes: ba8f48f7 ("mptcp: introduce mptcp_schedule_work")
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Fix fout being fopen'ed but then not subsequently fclose'd. In the affected
branch, fout is otherwise going out of scope.
Signed-off-by: Hao Zeng <zenghao@kylinos.cn>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230411084349.1999628-1-zenghao@kylinos.cn

Remove redundant (base_addr >= pool->addrs_cnt) comparison from the
conditional.

In particular, addr is computed as:

    addr = base_addr + offset

... where base_addr and offset are stored as 48-bit and 16-bit unsigned
integers, respectively. The above sum cannot overflow u64 since base_addr
has a maximum value of 0x0000ffffffffffff and offset has a maximum value
of 0xffff (implying a maximum sum of 0x000100000000fffe). Since overflow
is impossible, it follows that addr >= base_addr.

Now if (base_addr >= pool->addrs_cnt), then clearly:

    addr >= base_addr
         >= pool->addrs_cnt

Thus, (base_addr >= pool->addrs_cnt) implies (addr >= pool->addrs_cnt).
Subsequently, the former comparison is unnecessary in the conditional
since for any boolean expressions A and B, (A || B) && (A -> B) is
equivalent to B.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230411130025.19704-1-kal.conley@dectris.com

Add -Wmissing-prototypes ignore in bpf_testmod.c, similarly to what we
do in kernel code proper.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/oe-kbuild-all/202304080951.l14IDv3n-lkp@intel.com/
Link: https://lore.kernel.org/bpf/20230412034647.3968143-1-andrii@kernel.org

Perform the chunk boundary check like the page boundary check in
xp_desc_crosses_non_contig_pg(). This simplifies the implementation and
reduces the number of branches.
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230410121841.643254-1-kal.conley@dectris.com

test_prog's prog_tests/verifier_log.c is superseding test_verifier_log
stand-alone test. It cover same checks and adds more, and is also
integrated into test_progs test runner.

Just remove test_verifier_log.c.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412170655.1866831-1-andrii@kernel.org

Some compilers (for example clang-15) optimize bpf_testmod_loop_test and
remove the loop:

gcc version
(gdb) disassemble bpf_testmod_loop_test
Dump of assembler code for function bpf_testmod_loop_test:
   0x0000000000000570 <+0>:     callq  0x575 <bpf_testmod_loop_test+5>
   0x0000000000000575 <+5>:     xor    %eax,%eax
   0x0000000000000577 <+7>:     test   %edi,%edi
   0x0000000000000579 <+9>:     jle    0x587 <bpf_testmod_loop_test+23>
   0x000000000000057b <+11>:    xor    %edx,%edx
   0x000000000000057d <+13>:    add    %edx,%eax
   0x000000000000057f <+15>:    add    $0x1,%edx
   0x0000000000000582 <+18>:    cmp    %edx,%edi
   0x0000000000000584 <+20>:    jne    0x57d <bpf_testmod_loop_test+13>
   0x0000000000000586 <+22>:    retq
   0x0000000000000587 <+23>:    retq

clang-15 version
(gdb) disassemble bpf_testmod_loop_test
Dump of assembler code for function bpf_testmod_loop_test:
   0x0000000000000450 <+0>:     nopl   0x0(%rax,%rax,1)
   0x0000000000000455 <+5>:     test   %edi,%edi
   0x0000000000000457 <+7>:     jle    0x46b <bpf_testmod_loop_test+27>
   0x0000000000000459 <+9>:     lea    -0x1(%rdi),%eax
   0x000000000000045c <+12>:    lea    -0x2(%rdi),%ecx
   0x000000000000045f <+15>:    imul   %rax,%rcx
   0x0000000000000463 <+19>:    shr    %rcx
   0x0000000000000466 <+22>:    lea    -0x1(%rdi,%rcx,1),%eax
   0x000000000000046a <+26>:    retq
   0x000000000000046b <+27>:    xor    %eax,%eax
   0x000000000000046d <+29>:    retq

Note: The jne instruction is removed in clang-15 version.

Force the compile to keep the loop by making sum volatile.
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-4-song@kernel.org

skel->links.oncpu is leaked in one case. This causes test perf_branches
fails when it runs after get_stackid_cannot_attach:

./test_progs -t get_stackid_cannot_attach,perf_branches
84      get_stackid_cannot_attach:OK
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:FAIL:output not valid no valid sample from prog
146/1   perf_branches/perf_branches_hw:FAIL
146/2   perf_branches/perf_branches_no_hw:OK
146     perf_branches:FAIL

All error logs:
test_perf_branches_common:PASS:test_perf_branches_load 0 nsec
test_perf_branches_common:PASS:attach_perf_event 0 nsec
test_perf_branches_common:PASS:set_affinity 0 nsec
check_good_sample:FAIL:output not valid no valid sample from prog
146/1   perf_branches/perf_branches_hw:FAIL
146     perf_branches:FAIL
Summary: 1/1 PASSED, 0 SKIPPED, 1 FAILED

Fix this by adding the missing bpf_link__destroy().

Fixes: 346938e9 ("selftests/bpf: Add get_stackid_cannot_attach")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-3-song@kernel.org

Currently, perf_event sample period in perf_event_stackmap is set too low
that the test fails randomly. Fix this by using the max sample frequency,
from read_perf_max_sample_freq().

Move read_perf_max_sample_freq() to testing_helpers.c. Replace the CHECK()
with if-printf, as CHECK is not available in testing_helpers.c.

Fixes: 1da4864c ("selftests/bpf: Add callchain_stackid")
Signed-off-by: Song Liu <song@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230412210423.900851-2-song@kernel.org