We're setting wrong card codec conf for rt1019 amp devices in our
machine driver. Due to this left and right amp channels data are
reversed in our machines as wrong device prefix results in wrong
value for "Mono LR Select" rt1019 mixer control. Reverse dev ids
in codec conf with Left and Right name_prefix to fix such issue.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220120133605.476138-1-AjitKumar.Pandey@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

When SND_SOC_MT8195_MT6359_RT1011_RT5682 is selected,
and GPIOLIB is not selected,
Kbuild gives the following warning:

WARNING: unmet direct dependencies detected for SND_SOC_DMIC
  Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && GPIOLIB [=n]
  Selected by [y]:
  - SND_SOC_MT8195_MT6359_RT1011_RT5682 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=y] && SND_SOC_MT8195 [=y] && MTK_PMIC_WRAP [=y]

This is because SND_SOC_MT8195_MT6359_RT1011_RT5682
selects SND_SOC_DMIC without selecting or depending on
GPIOLIB, depsite SND_SOC_DMIC depending on GPIOLIB.

This unmet dependency bug was detected by Kismet,
a static analysis tool for Kconfig. Please advise
if this is not the appropriate solution.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20220117050324.68371-1-julianbraha@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Check for negative values of "priv->gain" to prevent an out of bounds
access.  The concern is that these might come from the user via:
  -> snd_ctl_elem_write_user()
    -> snd_ctl_elem_write()
      -> kctl->put()

Fixes: fa8d9151 ("ASoC: max9759: Add Amplifier Driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220119123101.GA9509@kiliSigned-off-by: Mark Brown <broonie@kernel.org>

If the device does not exist, of_get_child_by_name() will return NULL
pointer.
And devm_snd_soc_register_component() does not check it.
Also, I have noticed that cpcap_codec_driver has not been used yet.
Therefore, it should be better to check it in order to avoid the future
dereference of the NULL pointer.

Fixes: f6cdf2d3 ("ASoC: cpcap: new codec")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20220111025048.524134-1-jiasheng@iscas.ac.cnSigned-off-by: Mark Brown <broonie@kernel.org>

A previous change to simple-card resulted in asoc_simple_parse_dai
attempting to retrieve the dai_name for platform components, which are
unlikely to have a valid DAI name. This caused simple-card to fail to
probe when using the xlnx_formatter_pcm as the platform component, since
it does not register any DAI components.

Since the dai_name is not used for platform components, just skip trying
to retrieve it for those.

Fixes: f107294c ("ASoC: simple-card: support snd_soc_dai_link_component style for cpu")
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-6-robert.hancock@calian.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch is based on one in the Xilinx kernel tree, "ASoc: xlnx: Make
buffer bytes multiple of period bytes" by Devarsh Thakkar. The same
issue exists in the mainline version of the driver. The original
patch description is as follows:

"The Xilinx Audio Formatter IP has a constraint on period
bytes to be multiple of 64. This leads to driver changing
the period size to suitable frames such that period bytes
are multiple of 64.

Now since period bytes and period size are updated but not
the buffer bytes, this may make the buffer bytes unaligned
and not multiple of period bytes.

When this happens we hear popping noise as while DMA is being
done the buffer bytes are not enough to complete DMA access
for last period of frame within the application buffer boundary.

To avoid this, align buffer bytes too as multiple of 64, and
set another constraint to always enforce number of periods as
integer. Now since, there is already a rule in alsa core
to enforce Buffer size = Number of Periods * Period Size
this automatically aligns buffer bytes as multiple of period
bytes."

Fixes: 6f6c3c36 ("ASoC: xlnx: add pcm formatter platform driver")
Cc: Devarsh Thakkar <devarsh.thakkar@xilinx.com>
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
Link: https://lore.kernel.org/r/20220107214711.1100162-2-robert.hancock@calian.comSigned-off-by: Mark Brown <broonie@kernel.org>

The cs35l41 supports a low power DSP memory retention mode. Add support
for entering this mode when then device is not in use.
Co-authored-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

In preparation for the addition of PM runtime support move the test
key out of the register patches themselves. This is necessary to
allow the test key to be held during cache synchronisation, which is
required by the OTP settings which were unpacked from the device and
written by the driver.

Also whilst at it, the driver uses a mixture of accessing the test key
register by name and by address, consistently use the name.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220107160636.6555-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Shengjiu Wang <shengjiu.wang@nxp.com>:

Several improvement and fixes for AK codecs supported on i.MX platfroms

Currently, rx_port_value is a single unsigned int that gets overwritten
when slim_rx_mux_put() is called for any RX mux, then the same value is
read when slim_rx_mux_get() is called for any of them. This results in
slim_rx_mux_get() reporting the last value set by slim_rx_mux_put()
regardless of which SLIM RX mux is in question.

Turn rx_port_value into an array and store a separate value for each
SLIM RX mux.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220104033356.343685-1-y.oudjana@protonmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

RT1019 components was initially registered with i2c1 and i2c2 but
now changed to i2c0 and i2c1 in most of our AMD platforms. Change
default rt1019 components to 10EC1019:00 and 10EC1019:01 which is
aligned with most of AMD machines.

Any exception to rt1019 device ids in near future board design can
be handled using dmi based quirk for that machine.
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Link: https://lore.kernel.org/r/20220106150525.396170-1-AjitKumar.Pandey@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

change 'postion' to 'position'
Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com>
Link: https://lore.kernel.org/r/20220106092847.357035-1-qhjin.dev@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

According to RM, the clock divider range is from 1 to 8, clock
prescaling ratio may be any power of 2 from 1 to 128.
So the supported divider is not all the value between
1 and 1024, just limited value in that range.

Create table for the supported divder and add function to
check the clock divider is available by comparing with
the table.

Fixes: d0250cf4 ("ASoC: fsl_asrc: Add an option to select internal ratio mode")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641380883-20709-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.

Add support for boards which have this setup and which specify which
external GPIO to use in the special Android AMCR0F28 ACPI device.

And add a quirk for the Asus TF103C tablet which uses this setup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-7-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some X86 tablets, which ship with Android as factory installed OS,
specify codec IRQs/GPIOS in a special Android AMCR0F28 ACPI device.

Add support for retrieving the codec IRQ from this ACPI device instead
of from the 10EC5640 device describing the codec itself and enable this
on Asus MemoPad 7 ME176C tablets.

This fixes jack-detect not working on these tablets.

Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-6-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some boards have the codec IRQ hooked-up as normally, so the driver can
still do things like headset vs headphones and button-press detection,
but instead of using one of the JD pins of the codec, an external GPIO
is used to report the jack-presence switch status of the jack.

Add support for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-5-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

On some boards where the firmware/fwnode information is in essence
read-only (x86 + ACPI boards) the i2c_client for the codec may contain
the wrong IRQ or no IRQ at all.

Since we only request the IRQ once snd_soc_component_set_jack() gets
called, allow machine drivers to override the IRQ with the proper one
through the data parameter to snd_soc_component_set_jack().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-4-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Change jack_work from a struct work_struct to a struct delayed_work, this
is a preparation patch for adding support for boards where an external
GPIO is used for jack-detect, rather then one of the JD pins of the codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-3-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 2b9c8d2b ("ASoC: rt5640: Add the HDA header support") adds
re-queuing of the jack_work on resume when rt5640->jd_src != 0.

But the jack_work will unconditionally deref rt5640->jack and that might
be NULL. E.g. the sound/soc/intel/boards/bytcr_rt5640.c machine driver
call snd_soc_component_set_jack(codec, NULL, NULL) from pre_suspend to
disable the IRQ to avoid spurious wakeups, so when rt5640_resume()
runs rt5640->jack will be NULL in this case.

Make the queueing of the work conditional on rt5640->jack instead of
on rt5640->jd_src to fix this.

Fixes: 2b9c8d2b ("ASoC: rt5640: Add the HDA header support")
Cc: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20220106110128.66049-2-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

According to RM, on auto mode:
For codec AK4458 and AK4497, the lowest ratio of MLCK/FS is 256
if sample rate is 8kHz-48kHz,
For codec AK5558, the lowest ratio of MLCK/FS is 512 if sample
rate is 8kHz-48kHz.

With these setting the sound quality for 8kHz-48kHz can be improved.

Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-4-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Transfer the refined slots and slot_width to akcodec_get_mclk_rate()
for mclk calculation, otherwise the mclk frequency does not match
with the slots and slot_width for S16_LE format, because the default
slot_width is 32.

Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-3-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

The SAI on i.MX8MQ don't support one2one ratio for mclk:bclk, so
the mclk frequency exceeds the supported range of codec for
the case that sample rate is larger than 705kHZ and format is
S32_LE. Update the supported width for such case.

Fixes: aa736700 ("ASoC: imx-card: Add imx-card machine driver")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1641292835-19085-2-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

A randconfig caught a compile warning that is now treated as a fatal
error:
  sound/soc/codecs/ak4375.c:415:13: error: ‘ak4375_power_off’ defined but not used [-Werror=unused-function]

where ak4375_power_off() is used only from the PM handler.

As both suspend and resumes are already marked with __maybe_unused,
let's rip off the superfluous ifdef CONFIG_PM, so that the error above
can be avoided.

Fixes: 53778b82 ("ASoC: Add AK4375 support")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20220105162409.20635-1-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Charles Keepax <ckeepax@opensource.cirrus.com>:

This patch series adds support for the low power hibernation feature
on cs35l41. This allows the DSP memory to be retained whilst the
device enters a very low power state.

When the reset_gpio GPIO is used, it is better to put the codec
back into reset state when the driver unbinds.

Add a remove() function to accomplish that.
Suggested-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220104180613.639317-1-festevam@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In the case a device can support retaining the firmware memory across
low power states it is useful for the preloader widget to only power up
whilst actually loading/unloading the core, as opposed to the normal
operation where the widget is powered for the entire time a firmware is
preloaded onto the core. Add support for this mode and a flag to enable
it.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-7-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

If the Halo registers are kept in the register cache the
HALO_CORE_RESET bit will be retained as 1 after reset is triggered in
cs_dsp_halo_start_core. This will cause subsequent writes to reset
the core which is not desired. Apart from this bit the rest of the
register bits are cacheable, so for safety sake clear the bit to
ensure the cache is consistent.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-6-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

It makes no sense to cache the test/user key registers, since they
require values written at specific times, mark them volatile. It is
probably best if they can't be accessed from user-space either, so
mark them precious as well.

The interrupt force, edge, polarity and debounce are all settings
applied to the IRQ rather than status bits and as such should not be
volatile.

The OTP trim values will require re-application in the event of a
cache sync and as such should not be volatile. The OTPID however
should be volatile.

The DSP scratch registers are used to read back an error/debug code
from the DSP on shutdown, as such these should be marked volatile.

Finally, add some missing defaults, add TST_FS_MON0, and allow the
DSP core control register to be cached.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-5-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The wm_adsp_event should be called before the early_event on power
down, event stops the core running and early_event then powers down
the core. Additionally, the core should only be stopped if it was
actually running in the first place.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-4-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

The IRQ is not used for the PDN_DONE bit, this is polled during the DAPM
sequence, remove the misleading comment.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-3-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add IDs for the CS35L51/53 variants, the functionality is shared with
CS35L41.
Signed-off-by: David Rhodes <david.rhodes@cirrus.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220105113026.18955-2-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

modprobe can't handle spaces in aliases.

Fixes: 9e28f653 ("ASoC: fsl_mqs: Add MQS component driver")
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Link: https://lore.kernel.org/r/20220104132218.1690103-1-hi@alyssa.isSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Trevor Wu <trevor.wu@mediatek.com>:

This series of patches repairs some problems for pcmif BE dai.
The unexpected control flow is corrected, and the missing playback
support of DPCM is added.

Merge series from Lucas Tanure <tanureal@opensource.cirrus.com>:

Initial refactoring to support use of cs35l41 from the HDA driver stack.

So we can send to Linus.

ASoC and HDA will use the same registers to configure
internal boost for the device
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-7-tanureal@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

ASoC and HDA will use the same register to set channels
for the device
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-6-tanureal@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

ASoC and HDA systems require the same errata patches, so
move it to the shared code using a function the correctly
applies the patches by revision

Also, move CS35L41_DSP1_CCM_CORE_CTRL write to errata
patch function as is required to be written at boot,
but not in regmap_register_patch sequence as will affect
waking up from hibernation
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-5-tanureal@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

ASoC and HDA systems for all revisions of CS35L41 will benefit
from having this initialization, so add it to reg_sequence of
each revision

By moving to reg_sequence all gains are set to zero. And boost,
monitoring parts, and class D amplifier are disabled.
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-4-tanureal@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

ASoC and HDA will do the same cs35l41_otp_unpack, so move it
to shared code
Signed-off-by: Lucas Tanure <tanureal@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20211217115708.882525-3-tanureal@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>