The E800 series hardware uses the same iAVF driver as older devices,
including the virtchnl negotiation scheme.

This negotiation scheme includes a mechanism to determine what type of RSS
should be supported, including RSS over PF virtchnl messages, RSS over
firmware AdminQ messages, and RSS via direct register access.

The PF driver will always prefer VIRTCHNL_VF_OFFLOAD_RSS_PF if its
supported by the VF driver. However, if an older VF driver is loaded, it
may request only VIRTCHNL_VF_OFFLOAD_RSS_REG or VIRTCHNL_VF_OFFLOAD_RSS_AQ.

The ice driver happily agrees to support these methods. Unfortunately, the
underlying hardware does not support these mechanisms. The E800 series VFs
don't have the appropriate registers for RSS_REG. The mailbox queue used by
VFs for VF to PF communication blocks messages which do not have the
VF-to-PF opcode.

Stop lying to the VF that it could support RSS over AdminQ or registers, as
these interfaces do not work when the hardware is operating on an E800
series device.

In practice this is unlikely to be hit by any normal user. The iAVF driver
has supported RSS over PF virtchnl commands since 2016, and always defaults
to using RSS_PF if possible.

In principle, nothing actually stops the existing VF from attempting to
access the registers or send an AQ command. However a properly coded VF
will check the capability flags and will report a more useful error if it
detects a case where the driver does not support the RSS offloads that it
does.

Fixes: 1071a835 ("ice: Implement virtchnl commands for AVF support")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Alan Brady <alan.brady@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Fix softirq's not being handled during napi_schedule() call when
receiving marker packets for queue disable by disabling local bottom
half.

The issue can be seen on ifdown:
NOHZ tick-stop error: Non-RCU local softirq work is pending, handler #08!!!

Using ftrace to catch the failing scenario:
ifconfig   [003] d.... 22739.830624: softirq_raise: vec=3 [action=NET_RX]
<idle>-0   [003] ..s.. 22739.831357: softirq_entry: vec=3 [action=NET_RX]

No interrupt and CPU is idle.

After the patch when disabling local BH before calling napi_schedule:
ifconfig   [003] d.... 22993.928336: softirq_raise: vec=3 [action=NET_RX]
ifconfig   [003] ..s1. 22993.928337: softirq_entry: vec=3 [action=NET_RX]

Fixes: c2d548ca ("idpf: add TX splitq napi poll support")
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: Alan Brady <alan.brady@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Saeed Mahameed says:

====================
mlx5 fixes 2024-03-01

This series provides bug fixes to mlx5 driver.
Please pull and let me know if there is any problem.

* tag 'mlx5-fixes-2024-03-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5e: Switch to using _bh variant of of spinlock API in port timestamping NAPI poll context
  net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map
  net/mlx5e: Fix MACsec state loss upon state update in offload path
  net/mlx5e: Change the warning when ignore_flow_level is not supported
  net/mlx5: Check capability for fw_reset
  net/mlx5: Fix fw reporter diagnose output
  net/mlx5: E-switch, Change flow rule destination checking
  Revert "net/mlx5e: Check the number of elements before walk TC rhashtable"
  Revert "net/mlx5: Block entering switchdev mode with ns inconsistency"
====================

Link: https://lore.kernel.org/r/20240302070318.62997-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-03-01 (ixgbe, i40e, ice)

This series contains updates to ixgbe, i40e, and ice drivers.

Maciej corrects disable flow for ixgbe, i40e, and ice drivers which could
cause non-functional interface with AF_XDP.

Michal restores host configuration when changing MSI-X count for VFs on
ice driver.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: reconfig host after changing MSI-X on VF
  ice: reorder disabling IRQ and NAPI in ice_qp_dis
  i40e: disable NAPI right after disabling irqs when handling xsk_pool
  ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}able
====================

Link: https://lore.kernel.org/r/20240301192549.2993798-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Based on the static analyzis of the code it looks like when an entry
from the MAC table was removed, the entry was still used after being
freed. More precise the vid of the mac_entry was used after calling
devm_kfree on the mac_entry.
The fix consists in first using the vid of the mac_entry to delete the
entry from the HW and after that to free it.

Fixes: b37a1bae ("net: sparx5: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
selftests: mptcp: fixes for diag.sh

Here are two patches fixing issues in MPTCP diag.sh kselftest:

- Patch 1 makes sure the exit code is '1' in case of error, and not the
  test ID, not to return an exit code that would be wrongly interpreted
  by the ksefltests framework, e.g. '4' means 'skip'.

- Patch 2 avoids waiting for unnecessary conditions, which can cause
  timeouts in some very slow environments.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>

When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.

If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.

When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.

While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.

Fixes: b4b51d36 ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.orgSigned-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!

So we should do ret=${KSFT_FAIL} instead.

Fixes: df62f2ec ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cdd ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If message fills up we need to stop writing. 'break' will
only get us out of the iteration over pools of a single
netdev, we need to also stop walking netdevs.

This results in either infinite dump, or missing pools,
depending on whether message full happens on the last
netdev (infinite dump) or non-last (missing pools).

Fixes: 950ab53b ("net: page_pool: implement GET in the netlink API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot triggered a bug in geneve_rx() [1]

Issue is similar to the one I fixed in commit 8d975c15
("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")

We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.

pskb_inet_may_pull() makes sure the needed headers are in skb->head.

[1]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
 BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline]
 BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
  IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
  geneve_rx drivers/net/geneve.c:279 [inline]
  geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
  udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108
  udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186
  udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346
  __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422
  udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604
  ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
  ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
  dst_input include/net/dst.h:461 [inline]
  ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
  __netif_receive_skb_one_core net/core/dev.c:5534 [inline]
  __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
  process_backlog+0x480/0x8b0 net/core/dev.c:5976
  __napi_poll+0xe3/0x980 net/core/dev.c:6576
  napi_poll net/core/dev.c:6645 [inline]
  net_rx_action+0x8b8/0x1870 net/core/dev.c:6778
  __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553
  do_softirq+0x9a/0xf0 kernel/softirq.c:454
  __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381
  local_bh_enable include/linux/bottom_half.h:33 [inline]
  rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
  __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378
  dev_queue_xmit include/linux/netdevice.h:3171 [inline]
  packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3081 [inline]
  packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  __sys_sendto+0x735/0xa10 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3819 [inline]
  slab_alloc_node mm/slub.c:3860 [inline]
  kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
  __alloc_skb+0x352/0x790 net/core/skbuff.c:651
  alloc_skb include/linux/skbuff.h:1296 [inline]
  alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394
  sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783
  packet_alloc_skb net/packet/af_packet.c:2930 [inline]
  packet_snd net/packet/af_packet.c:3024 [inline]
  packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  __sys_sendto+0x735/0xa10 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Fixes: 2d07dc79 ("geneve: add initial netdev driver for GENEVE tunnels")
Reported-and-tested-by: syzbot+6a1423ff3f97159aae64@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I'm updating __assign_str() and will be removing the second parameter. To
make sure that it does not break anything, I make sure that it matches the
__string() field, as that is where the string is actually going to be
saved in. To make sure there's nothing that breaks, I added a WARN_ON() to
make sure that what was used in __string() is the same that is used in
__assign_str().

In doing this change, an error was triggered as __assign_str() now expects
the string passed in to be a char * value. I instead had the following
warning:

include/trace/events/qdisc.h: In function ‘trace_event_raw_event_qdisc_reset’:
include/trace/events/qdisc.h:91:35: error: passing argument 1 of 'strcmp' from incompatible pointer type [-Werror=incompatible-pointer-types]
   91 |                 __assign_str(dev, qdisc_dev(q));

That's because the qdisc_enqueue() and qdisc_reset() pass in qdisc_dev(q)
to __assign_str() and to __string(). But that function returns a pointer
to struct net_device and not a string.

It appears that these events are just saving the pointer as a string and
then reading it as a string as well.

Use qdisc_dev(q)->name to save the device instead.

Fixes: a34dac0b ("net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The NAPI poll context is a softirq context. Do not use normal spinlock API
in this context to prevent concurrency issues.

Fixes: 3178308a ("net/mlx5e: Make tx_port_ts logic resilient to out-of-order CQEs")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CC: Vadim Fedorenko <vadfed@meta.com>

net/mlx5e: Use a memory barrier to enforce PTP WQ xmit submission tracking occurs after populating the metadata_map

Just simply reordering the functions mlx5e_ptp_metadata_map_put and
mlx5e_ptpsq_track_metadata in the mlx5e_txwqe_complete context is not good
enough since both the compiler and CPU are free to reorder these two
functions. If reordering does occur, the issue that was supposedly fixed by
7e3f3ba9 ("net/mlx5e: Track xmit submission to PTP WQ after populating
metadata map") will be seen. This will lead to NULL pointer dereferences in
mlx5e_ptpsq_mark_ts_cqes_undelivered in the NAPI polling context due to the
tracking list being populated before the metadata map.

Fixes: 7e3f3ba9 ("net/mlx5e: Track xmit submission to PTP WQ after populating metadata map")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
CC: Vadim Fedorenko <vadfed@meta.com>

The packet number attribute of the SA is incremented by the device rather
than the software stack when enabling hardware offload. Because the packet
number attribute is managed by the hardware, the software has no insight
into the value of the packet number attribute actually written by the
device.

Previously when MACsec offload was enabled, the hardware object for
handling the offload was destroyed when the SA was disabled. Re-enabling
the SA would lead to a new hardware object being instantiated. This new
hardware object would not have any recollection of the correct packet
number for the SA. Instead, destroy the flow steering rule when
deactivating the SA and recreate it upon reactivation, preserving the
original hardware object.

Fixes: 8ff0ac5b ("net/mlx5: Add MACsec offload Tx command support")
Signed-off-by: Emeel Hakim <ehakim@nvidia.com>
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Downgrade the print from mlx5_core_warn() to mlx5_core_dbg(), as it
is just a statement of fact that firmware doesn't support ignore flow
level.

And change the wording to "firmware flow level support is missing", to
make it more accurate.

Fixes: ae2ee3be ("net/mlx5: CT: Remove warning of ignore_flow_level support for VFs")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Suggested-by: Elliott, Robert (Servers) <elliott@hpe.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Functions which can't access MFRL (Management Firmware Reset Level)
register, have no use of fw_reset structures or events. Remove fw_reset
structures allocation and registration for fw reset events notifications
for these functions.

Having the devlink param enable_remote_dev_reset on functions that don't
have this capability is misleading as these functions are not allowed to
influence the reset flow. Hence, this patch removes this parameter for
such functions.

In addition, return not supported on devlink reload action fw_activate
for these functions.

Fixes: 38b9f903 ("net/mlx5: Handle sync reset request event")
Signed-off-by: Moshe Shemesh <moshe@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Restore fw reporter diagnose to print the syndrome even if it is zero.
Following the cited commit, in this case (syndrome == 0) command returns no
output at all.

This fix restores command output in case syndrome is cleared:
$ devlink health diagnose pci/0000:82:00.0 reporter fw
    Syndrome: 0

Fixes: d17f98bf ("net/mlx5: devlink health: use retained error fmsg API")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The checking in the cited commit is not accurate. In the common case,
VF destination is internal, and uplink destination is external.
However, uplink destination with packet reformat is considered as
internal because firmware uses LB+hairpin to support it. Update the
checking so header rewrite rules with both internal and external
destinations are not allowed.

Fixes: e0e22d59 ("net/mlx5: E-switch, Add checking for flow rule destinations")
Signed-off-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This reverts commit 4e25b661.

This Commit was mistakenly applied by pulling the wrong tag, remove it.

Fixes: 4e25b661 ("net/mlx5e: Check the number of elements before walk TC rhashtable")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

This reverts commit 662404b2.
The revert is required due to the suspicion it is not good for anything
and cause crash.

Fixes: 662404b2 ("net/mlx5e: Block entering switchdev mode with ns inconsistency")
Signed-off-by: Gavin Li <gavinl@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

During VSI reconfiguration filters and VSI config which is set in
ice_vf_init_host_cfg() are lost. Recall the host configuration function
to restore them.

Without this config VF on which MSI-X amount was changed might had a
connection problems.

Fixes: 4d38cb44 ("ice: manage VFs MSI-X using resource tracking")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_qp_dis() currently does things in very mixed way. Tx is stopped
before disabling IRQ on related queue vector, then it takes care of
disabling Rx and finally NAPI is disabled.

Let us start with disabling IRQs in the first place followed by turning
off NAPI. Then it is safe to handle queues.

One subtle change on top of that is that even though ice_qp_ena() looks
more sane, clear ICE_CFG_BUSY as the last thing there.

Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Disable NAPI before shutting down queues that this particular NAPI
contains so that the order of actions in i40e_queue_pair_disable()
mirrors what we do in i40e_queue_pair_enable().

Fixes: 123cecd4 ("i40e: added queue pair disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Currently routines that are supposed to toggle state of ring pair do not
take care of associated interrupt with queue vector that these rings
belong to. This causes funky issues such as dead interface due to irq
misconfiguration, as per Pavel's report from Closes: tag.

Add a function responsible for disabling single IRQ in EIMC register and
call this as a very first thing when disabling ring pair during xsk_pool
setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this,
disable/enable NAPI as first/last thing when dealing with closing or
opening ring pair that xsk_pool is being configured on.
Reported-by: Pavel Vazharov <pavel@x3me.net>
Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/
Fixes: 024aa580 ("ixgbe: added Rx/Tx ring disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add myself as co-maintainer for Socionext netsec driver.
This commit also removes Jassi from maintainer since he
no longer has a Developerbox.

Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Masahisa Kojima <kojima.masahisa@socionext.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is now possible to disable BQL, but that causes the cpsw driver to break:

drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
  297 |                    dql_avail(&netif_txq->dql),

There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.

Fixes: ea7f3cfa ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current driver has some asymmetry in the runtime PM calls. On lan78xx_open()
it will call usb_autopm_get() and unconditionally usb_autopm_put(). And
on lan78xx_stop() it will call only usb_autopm_put(). So far, it was
working only because this driver do not activate autosuspend by default,
so it was visible only by warning "Runtime PM usage count underflow!".

Since, with current driver, we can't use runtime PM with active link,
execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise,
keep ref counting high as long as interface is open.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The internal delay properties are not mandatory and should have a
documented default value. The device only supports either no delay or a
fixed delay and the device reset default is no delay, document the
default as no delay.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, WiFi and netfilter.

  We have one outstanding issue with the stmmac driver, which may be a
  LOCKDEP false positive, not a blocker.

  Current release - regressions:

   - netfilter: nf_tables: re-allow NFPROTO_INET in
     nft_(match/target)_validate()

   - eth: ionic: fix error handling in PCI reset code

  Current release - new code bugs:

   - eth: stmmac: complete meta data only when enabled, fix null-deref

   - kunit: fix again checksum tests on big endian CPUs

  Previous releases - regressions:

   - veth: try harder when allocating queue memory

   - Bluetooth:
      - hci_bcm4377: do not mark valid bd_addr as invalid
      - hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST

  Previous releases - always broken:

   - info leak in __skb_datagram_iter() on netlink socket

   - mptcp:
      - map v4 address to v6 when destroying subflow
      - fix potential wake-up event loss due to sndbuf auto-tuning
      - fix double-free on socket dismantle

   - wifi: nl80211: reject iftype change with mesh ID change

   - fix small out-of-bound read when validating netlink be16/32 types

   - rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

   - ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()

   - ip_tunnel: prevent perpetual headroom growth with huge number of
     tunnels on top of each other

   - mctp: fix skb leaks on error paths of mctp_local_output()

   - eth: ice: fixes for DPLL state reporting

   - dpll: rely on rcu for netdev_dpll_pin() to prevent UaF

   - eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
     tree"

* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  dpll: fix build failure due to rcu_dereference_check() on unknown type
  kunit: Fix again checksum tests on big endian CPUs
  tls: fix use-after-free on failed backlog decryption
  tls: separate no-async decryption request handling from async
  tls: fix peeking with sync+async decryption
  tls: decrement decrypt_pending if no async completion will be called
  gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
  net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
  igb: extend PTP timestamp adjustments to i211
  rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
  tools: ynl: fix handling of multiple mcast groups
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  ...

Pull Landlock fix from Mickaël Salaün:
 "Fix a potential issue when handling inodes with inconsistent
  properties"

* tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Fix asymmetric private inodes referring

Tasmiya reports that their compiler complains that we deref
a pointer to unknown type with rcu_dereference_rtnl():

include/linux/rcupdate.h:439:9: error: dereferencing pointer to incomplete type ‘struct dpll_pin’

Unclear what compiler it is, at the moment, and we can't report
but since DPLL can't be a module - move the code from the header
into the source file.

Fixes: 0d60d8df ("dpll: rely on rcu for netdev_dpll_pin()")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Link: https://lore.kernel.org/all/3fcf3a2c-1c1b-42c1-bacb-78fdcd700389@linux.vnet.ibm.com/Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240229190515.2740221-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit b38460bc ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cb ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.

So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cb ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - mgmt: Fix limited discoverable off timeout
 - hci_qca: Set BDA quirk bit if fwnode exists in DT
 - hci_bcm4377: do not mark valid bd_addr as invalid
 - hci_sync: Check the correct flag before starting a scan
 - Enforce validation on max value of connection interval
 - hci_sync: Fix accept_list when attempting to suspend
 - hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
 - Avoid potential use-after-free in hci_error_reset
 - rfcomm: Fix null-ptr-deref in rfcomm_check_security
 - hci_event: Fix wrongly recorded wakeup BD_ADDR
 - qca: Fix wrong event type for patch config command
 - qca: Fix triggering coredump implementation

* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
  Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
  Bluetooth: hci_sync: Fix accept_list when attempting to suspend
  Bluetooth: Avoid potential use-after-free in hci_error_reset
  Bluetooth: hci_sync: Check the correct flag before starting a scan
  Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================

Link: https://lore.kernel.org/r/20240228145644.2269088-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sabrina Dubroca says:

====================
tls: a few more fixes for async decrypt

The previous patchset [1] took care of "full async". This adds a few
fixes for cases where only part of the crypto operations go the async
route, found by extending my previous debug patch [2] to do N
synchronous operations followed by M asynchronous ops (with N and M
configurable).

[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=823784&state=*
[2] https://lore.kernel.org/all/9d664093b1bf7f47497b2c40b3a085b45f3274a2.1694021240.git.sd@queasysnail.net/
====================

Link: https://lore.kernel.org/r/cover.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the decrypt request goes to the backlog and crypto_aead_decrypt
returns -EBUSY, tls_do_decryption will wait until all async
decryptions have completed. If one of them fails, tls_do_decryption
will return -EBADMSG and tls_decrypt_sg jumps to the error path,
releasing all the pages. But the pages have been passed to the async
callback, and have already been released by tls_decrypt_done.

The only true async case is when crypto_aead_decrypt returns
 -EINPROGRESS. With -EBUSY, we already waited so we can tell
tls_sw_recvmsg that the data is available for immediate copy, but we
need to notify tls_decrypt_sg (via the new ->async_done flag) that the
memory has already been released.

Fixes: 85905414 ("net: tls: handle backlogging of crypto requests")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4755dd8d9bebdefaa19ce1439b833d6199d4364c.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.

We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec79619 ("tls: fix race between
async notify and socket close") took care of it.

This will make the next fix easier.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we peek from 2 records with a currently empty rx_list, and the
first record is decrypted synchronously but the second record is
decrypted async, the following happens:
  1. decrypt record 1 (sync)
  2. copy from record 1 to the userspace's msg
  3. queue the decrypted record to rx_list for future read(!PEEK)
  4. decrypt record 2 (async)
  5. queue record 2 to rx_list
  6. call process_rx_list to copy data from the 2nd record

We currently pass copied=0 as skip offset to process_rx_list, so we
end up copying once again from the first record. We should skip over
the data we've already copied.

Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs

Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1b132d2b2b99296bfde54e8a67672d90d6d16e71.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With mixed sync/async decryption, or failures of crypto_aead_decrypt,
we increment decrypt_pending but we never do the corresponding
decrement since tls_decrypt_done will not be called. In this case, we
should decrement decrypt_pending immediately to avoid getting stuck.

For example, the prequeue prequeue test gets stuck with mixed
modes (one async decrypt + one sync decrypt).

Fixes: 94524d8f ("net/tls: Add support for async decryption of tls records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c56d5fc35543891d5319f834f25622360e1bfbec.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The gtp_link_ops operations structure for the subsystem must be
registered after registering the gtp_net_ops pernet operations structure.

Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:

[ 1010.702740] gtp: GTP module unloaded
[ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
[ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1
[ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014
[ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00
[ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203
[ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000
[ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282
[ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000
[ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80
[ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400
[ 1010.715953] FS:  00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000
[ 1010.715958] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0
[ 1010.715968] PKRU: 55555554
[ 1010.715972] Call Trace:
[ 1010.715985]  ? __die_body.cold+0x1a/0x1f
[ 1010.715995]  ? die_addr+0x43/0x70
[ 1010.716002]  ? exc_general_protection+0x199/0x2f0
[ 1010.716016]  ? asm_exc_general_protection+0x1e/0x30
[ 1010.716026]  ? gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.716034]  ? gtp_net_exit+0x150/0x150 [gtp]
[ 1010.716042]  __rtnl_newlink+0x1063/0x1700
[ 1010.716051]  ? rtnl_setlink+0x3c0/0x3c0
[ 1010.716063]  ? is_bpf_text_address+0xc0/0x1f0
[ 1010.716070]  ? kernel_text_address.part.0+0xbb/0xd0
[ 1010.716076]  ? __kernel_text_address+0x56/0xa0
[ 1010.716084]  ? unwind_get_return_address+0x5a/0xa0
[ 1010.716091]  ? create_prof_cpu_mask+0x30/0x30
[ 1010.716098]  ? arch_stack_walk+0x9e/0xf0
[ 1010.716106]  ? stack_trace_save+0x91/0xd0
[ 1010.716113]  ? stack_trace_consume_entry+0x170/0x170
[ 1010.716121]  ? __lock_acquire+0x15c5/0x5380
[ 1010.716139]  ? mark_held_locks+0x9e/0xe0
[ 1010.716148]  ? kmem_cache_alloc_trace+0x35f/0x3c0
[ 1010.716155]  ? __rtnl_newlink+0x1700/0x1700
[ 1010.716160]  rtnl_newlink+0x69/0xa0
[ 1010.716166]  rtnetlink_rcv_msg+0x43b/0xc50
[ 1010.716172]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716179]  ? lock_acquire+0x1fe/0x560
[ 1010.716188]  ? netlink_deliver_tap+0x12f/0xd50
[ 1010.716196]  netlink_rcv_skb+0x14d/0x440
[ 1010.716202]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716208]  ? netlink_ack+0xab0/0xab0
[ 1010.716213]  ? netlink_deliver_tap+0x202/0xd50
[ 1010.716220]  ? netlink_deliver_tap+0x218/0xd50
[ 1010.716226]  ? __virt_addr_valid+0x30b/0x590
[ 1010.716233]  netlink_unicast+0x54b/0x800
[ 1010.716240]  ? netlink_attachskb+0x870/0x870
[ 1010.716248]  ? __check_object_size+0x2de/0x3b0
[ 1010.716254]  netlink_sendmsg+0x938/0xe40
[ 1010.716261]  ? netlink_unicast+0x800/0x800
[ 1010.716269]  ? __import_iovec+0x292/0x510
[ 1010.716276]  ? netlink_unicast+0x800/0x800
[ 1010.716284]  __sock_sendmsg+0x159/0x190
[ 1010.716290]  ____sys_sendmsg+0x712/0x880
[ 1010.716297]  ? sock_write_iter+0x3d0/0x3d0
[ 1010.716304]  ? __ia32_sys_recvmmsg+0x270/0x270
[ 1010.716309]  ? lock_acquire+0x1fe/0x560
[ 1010.716315]  ? drain_array_locked+0x90/0x90
[ 1010.716324]  ___sys_sendmsg+0xf8/0x170
[ 1010.716331]  ? sendmsg_copy_msghdr+0x170/0x170
[ 1010.716337]  ? lockdep_init_map_type+0x2c7/0x860
[ 1010.716343]  ? lockdep_hardirqs_on_prepare+0x430/0x430
[ 1010.716350]  ? debug_mutex_init+0x33/0x70
[ 1010.716360]  ? percpu_counter_add_batch+0x8b/0x140
[ 1010.716367]  ? lock_acquire+0x1fe/0x560
[ 1010.716373]  ? find_held_lock+0x2c/0x110
[ 1010.716384]  ? __fd_install+0x1b6/0x6f0
[ 1010.716389]  ? lock_downgrade+0x810/0x810
[ 1010.716396]  ? __fget_light+0x222/0x290
[ 1010.716403]  __sys_sendmsg+0xea/0x1b0
[ 1010.716409]  ? __sys_sendmsg_sock+0x40/0x40
[ 1010.716419]  ? lockdep_hardirqs_on_prepare+0x2b3/0x430
[ 1010.716425]  ? syscall_enter_from_user_mode+0x1d/0x60
[ 1010.716432]  do_syscall_64+0x30/0x40
[ 1010.716438]  entry_SYSCALL_64_after_hwframe+0x62/0xc7
[ 1010.716444] RIP: 0033:0x7fd1508cbd49
[ 1010.716452] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ef 70 0d 00 f7 d8 64 89 01 48
[ 1010.716456] RSP: 002b:00007fff18872348 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 1010.716463] RAX: ffffffffffffffda RBX: 000055f72bf0eac0 RCX: 00007fd1508cbd49
[ 1010.716468] RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000006
[ 1010.716473] RBP: 00007fff18872360 R08: 00007fff18872360 R09: 00007fff18872360
[ 1010.716478] R10: 00007fff18872360 R11: 0000000000000202 R12: 000055f72bf0e1b0
[ 1010.716482] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1010.716491] Modules linked in: gtp(+) udp_tunnel ib_core uinput af_packet rfkill qrtr joydev hid_generic usbhid hid kvm_intel iTCO_wdt intel_pmc_bxt iTCO_vendor_support kvm snd_hda_codec_generic ledtrig_audio irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hda_intel nls_utf8 snd_intel_dspcfg nls_cp866 psmouse aesni_intel vfat crypto_simd fat cryptd glue_helper snd_hda_codec pcspkr snd_hda_core i2c_i801 snd_hwdep i2c_smbus xhci_pci snd_pcm lpc_ich xhci_pci_renesas xhci_hcd qemu_fw_cfg tiny_power_button button sch_fq_codel vboxvideo drm_vram_helper drm_ttm_helper ttm vboxsf vboxguest snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device snd_timer snd soundcore msr fuse efi_pstore dm_mod ip_tables x_tables autofs4 virtio_gpu virtio_dma_buf drm_kms_helper cec rc_core drm virtio_rng virtio_scsi rng_core virtio_balloon virtio_blk virtio_net virtio_console net_failover failover ahci libahci libata evdev scsi_mod input_leds serio_raw virtio_pci intel_agp
[ 1010.716674]  virtio_ring intel_gtt virtio [last unloaded: gtp]
[ 1010.716693] ---[ end trace 04990a4ce61e174b ]---

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Ofitserov <oficerovas@altlinux.org>
Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228114703.465107-1-oficerovas@altlinux.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.

Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.

There is a day 0 bug in br_netfilter when used with connection tracking.

Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.

For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.

This patch disables NAT and conntrack helpers for multicast packets.

Patch #3 adds a selftest to cover for the br_netfilter bug.

netfilter pull request 24-02-29

* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================

Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>