- 31 Mar, 2018 3 commits
-
-
Khalid Elmously authored
Retpoline files for i386 are empty for the previous ABIs. It has been fixed by commit "UBUNTU: [Packaging] retpoline-extract -- instantiate retpoline files for i386". So ignore the check from the previous ABI files. Ignore: yes Signed-off-by:Khalid Elmously <khalid.elmously@canonical.com>
-
Kai-Heng Feng authored
BugLink: http://bugs.launchpad.net/bugs/1759821 This reverts commit fd865802. This commit causes a regression on some QCA ROME chips. The USB device reset happens in btusb_open(), hence firmware loading gets interrupted. Furthermore, this commit stops working after commit ("a0085f25 Bluetooth: btusb: driver to enable the usb-wakeup feature"). Reset-resume quirk only gets enabled in btusb_suspend() when it's not a wakeup source. If we really want to reset the USB device, we need to do it before btusb_open(). Let's handle it in drivers/usb/core/quirks.c. Cc: stable@vger.kernel.org Cc: Leif Liddy <leif.linux@gmail.com> Cc: Matthias Kaehlcke <mka@chromium.org> Cc: Brian Norris <briannorris@chromium.org> Cc: Daniel Drake <drake@endlessm.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Brian Norris <briannorris@chromium.org> Tested-by:
Marcel Holtmann <marcel@holtmann.org> (cherry picked from commit 7d06d589) Signed-off-by:
Joseph Salisbury <joseph.salisbury@canonical.com> Acked-by:
Brad Figg <brad.figg@canonical.com> Acked-by:
-
Khalid Elmously authored
Ignore: yes Signed-off-by:
-
- 28 Mar, 2018 5 commits
-
-
Khalid Elmously authored
Signed-off-by: -
Khalid Elmously authored
Retpoline files for i386 are empty for the previous ABIs. It has been fixed by commit "UBUNTU: [Packaging] retpoline-extract -- instantiate retpoline files for i386". So ignore the check from the previous ABI files. Ignore: yes Signed-off-by: -
Borislav Petkov authored
BugLink: http://bugs.launchpad.net/bugs/1758869 commit a15a7535 upstream with minor adjustments. Doing so is completely void of sense for multiple reasons so prevent it. Set dis_ucode_ldr to true and thus disable the microcode loader by default to address xen pv guests which execute the AP path but not the BSP path. By having it turned off by default, the APs won't run into the loader either. Also, check CPUID(1).ECX[31] which hypervisors set. Well almost, not the xen pv one. That one gets the aforementioned "fix". Also, improve the detection method by caching the final decision whether to continue loading in dis_ucode_ldr and do it once on the BSP. The APs then simply test that value. Signed-off-by:
Borislav Petkov <bp@suse.de> Tested-by:
Juergen Gross <jgross@suse.com> Tested-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> # 4.4.x Signed-off-by:
Rolf Neugebauer <rolf.neugebauer@docker.com> (back-ported from commit a15a7535) Reference: https://lkml.org/lkml/2018/2/8/455Acked-by:
Stefan Bader <stefan.bader@canonical.com> Acked-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Wei Yongjun authored
CVE-2018-8043 platform_get_resource() may fail and return NULL, so we should better check it's return value to avoid a NULL pointer dereference a bit later in the code. This is detected by Coccinelle semantic patch. @@ expression pdev, res, n, t, e, e1, e2; @@ res = platform_get_resource(pdev, t, n); + if (!res) + return -EINVAL; ... when != res == NULL e = devm_ioremap(e1, res->start, e2); Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> (cherry picked from commit 297a6961) Signed-off-by:
Po-Hsu Lin <po-hsu.lin@canonical.com> Acked-by:
-
Stefan Bader authored
Ignore: yes Signed-off-by:
-
- 13 Mar, 2018 32 commits
-
-
Kleber Sacilotto de Souza authored
Signed-off-by:Kleber Sacilotto de Souza <kleber.souza@canonical.com>
-
Kleber Sacilotto de Souza authored
Retpoline files for i386 are empty for the previous ABIs. It has been fixed by commit "UBUNTU: [Packaging] retpoline-extract -- instantiate retpoline files for i386". So ignore the check from the previous ABI files. Ignore: yes Signed-off-by: -
Greg Kroah-Hartman authored
BugLink: http://bugs.launchpad.net/bugs/1754592Signed-off-by:
-
Ben Hutchings authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit 19952667 upstream. Commit bdcf0a42 ("kernel: make groups_sort calling a responsibility group_info allocators") appears to break nfsd rootsquash in a pretty major way. It adds a call to groups_sort() inside the loop that copies/squashes gids, which means the valid gids are sorted along with the following garbage. The net result is that the highest numbered valid gids are replaced with any lower-valued garbage gids, possibly including 0. We should sort only once, after filling in all the gids. Fixes: bdcf0a42 ("kernel: make groups_sort calling a responsibility ...") Signed-off-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Acked-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Wolfgang Walter <linux@stwm.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Dan Streetman authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit 4ee806d5 ] When a tcp socket is closed, if it detects that its net namespace is exiting, close immediately and do not wait for FIN sequence. For normal sockets, a reference is taken to their net namespace, so it will never exit while the socket is open. However, kernel sockets do not take a reference to their net namespace, so it may begin exiting while the kernel socket is still open. In this case if the kernel socket is a tcp socket, it will stay open trying to complete its close sequence. The sock's dst(s) hold a reference to their interface, which are all transferred to the namespace's loopback interface when the real interfaces are taken down. When the namespace tries to take down its loopback interface, it hangs waiting for all references to the loopback interface to release, which results in messages like: unregister_netdevice: waiting for lo to become free. Usage count = 1 These messages continue until the socket finally times out and closes. Since the net namespace cleanup holds the net_mutex while calling its registered pernet callbacks, any new net namespace initialization is blocked until the current net namespace finishes exiting. After this change, the tcp socket notices the exiting net namespace, and closes immediately, releasing its dst(s) and their reference to the loopback interface, which lets the net namespace continue exiting. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1711407 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=97811Signed-off-by:
Dan Streetman <ddstreet@canonical.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit d0c081b4 ] syzbot reported yet another crash [1] that is caused by insufficient validation of DODGY packets. Two bugs are happening here to trigger the crash. 1) Flow dissection leaves with incorrect thoff field. 2) skb_probe_transport_header() sets transport header to this invalid thoff, even if pointing after skb valid data. 3) qdisc_pkt_len_init() reads out-of-bound data because it trusts tcp_hdrlen(skb) Possible fixes : - Full flow dissector validation before injecting bad DODGY packets in the stack. This approach was attempted here : https://patchwork.ozlabs.org/patch/ 861874/ - Have more robust functions in the core. This might be needed anyway for stable versions. This patch fixes the flow dissection issue. [1] CPU: 1 PID: 3144 Comm: syzkaller271204 Not tainted 4.15.0-rc4-mm1+ #49 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x257 lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:355 [inline] kasan_report+0x23b/0x360 mm/kasan/report.c:413 __asan_report_load2_noabort+0x14/0x20 mm/kasan/report.c:432 __tcp_hdrlen include/linux/tcp.h:35 [inline] tcp_hdrlen include/linux/tcp.h:40 [inline] qdisc_pkt_len_init net/core/dev.c:3160 [inline] __dev_queue_xmit+0x20d3/0x2200 net/core/dev.c:3465 dev_queue_xmit+0x17/0x20 net/core/dev.c:3554 packet_snd net/packet/af_packet.c:2943 [inline] packet_sendmsg+0x3ad5/0x60a0 net/packet/af_packet.c:2968 sock_sendmsg_nosec net/socket.c:628 [inline] sock_sendmsg+0xca/0x110 net/socket.c:638 sock_write_iter+0x31a/0x5d0 net/socket.c:907 call_write_iter include/linux/fs.h:1776 [inline] new_sync_write fs/read_write.c:469 [inline] __vfs_write+0x684/0x970 fs/read_write.c:482 vfs_write+0x189/0x510 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0xef/0x220 fs/read_write.c:581 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 34fad54c ("net: __skb_flow_dissect() must cap its return value") Fixes: a6e544b0 ("flow_dissector: Jump to exit code in __skb_flow_dissect") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Jim Westfall authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit cd9ff4de ] Map all lookup neigh keys to INADDR_ANY for loopback/point-to-point devices to avoid making an entry for every remote ip the device needs to talk to. This used the be the old behavior but became broken in a263b309 (ipv4: Make neigh lookups directly in output packet path) and later removed in 0bb4087c (ipv4: Fix neigh lookup keying over loopback/point-to-point devices) because it was broken. Signed-off-by:
Jim Westfall <jwestfall@surrealistic.net> Signed-off-by:
-
Jim Westfall authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit 096b9854 ] Use n->primary_key instead of pkey to account for the possibility that a neigh constructor function may have modified the primary_key value. Signed-off-by:
-
Neil Horman authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit 848b1598 ] with the introduction of commit b0eb57cb, it appears that rq->buf_info is improperly handled. While it is heap allocated when an rx queue is setup, and freed when torn down, an old line of code in vmxnet3_rq_destroy was not properly removed, leading to rq->buf_info[0] being set to NULL prior to its being freed, causing a memory leak, which eventually exhausts the system on repeated create/destroy operations (for example, when the mtu of a vmxnet3 interface is changed frequently. Fix is pretty straight forward, just move the NULL set to after the free. Tested by myself with successful results Applies to net, and should likely be queued for stable, please Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Reported-By: boyang@redhat.com CC: boyang@redhat.com CC: Shrikrishna Khare <skhare@vmware.com> CC: "VMware, Inc." <pv-drivers@vmware.com> CC: David S. Miller <davem@davemloft.net> Acked-by:
Shrikrishna Khare <skhare@vmware.com> Signed-off-by:
-
Xin Long authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit a0ff6600 ] After commit cea0cc80 ("sctp: use the right sk after waking up from wait_buf sleep"), it may change to lock another sk if the asoc has been peeled off in sctp_wait_for_sndbuf. However, the asoc's new sk could be already closed elsewhere, as it's in the sendmsg context of the old sk that can't avoid the new sk's closing. If the sk's last one refcnt is held by this asoc, later on after putting this asoc, the new sk will be freed, while under it's own lock. This patch is to revert that commit, but fix the old issue by returning error under the old sk's lock. Fixes: cea0cc80 ("sctp: use the right sk after waking up from wait_buf sleep") Reported-by: syzbot+ac6ea7baa4432811eb50@syzkaller.appspotmail.com Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
-
Xin Long authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit c5006b8a ] The check in sctp_sockaddr_af is not robust enough to forbid binding a v4mapped v6 addr on a v4 socket. The worse thing is that v4 socket's bind_verify would not convert this v4mapped v6 addr to a v4 addr. syzbot even reported a crash as the v4 socket bound a v6 addr. This patch is to fix it by doing the common sa.sa_family check first, then AF_INET check for v4mapped v6 addrs. Fixes: 7dab83de ("sctp: Support ipv6only AF_INET6 sockets.") Reported-by: syzbot+7b7b518b1228d2743963@syzkaller.appspotmail.com Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Francois Romieu authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit a78e9366 ] Hardware statistics retrieval hurts in tight invocation loops. Avoid extraneous write and enforce strict ordering of writes targeted to the tally counters dump area address registers. Signed-off-by:
Francois Romieu <romieu@fr.zoreil.com> Tested-by:
Oliver Freyermuth <o.freyermuth@googlemail.com> Signed-off-by:
-
Guillaume Nault authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit 02612bb0 ] In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom was probably fine before the introduction of ->needed_headroom in commit f5184d26 ("net: Allow netdevices to specify needed head/tailroom"). But now, virtual devices typically advertise the size of their overhead in dev->needed_headroom, so we must also take it into account in skb_reserve(). Allocation size of skb is also updated to take dev->needed_tailroom into account and replace the arbitrary 32 bytes with the real size of a PPPoE header. This issue was discovered by syzbot, who connected a pppoe socket to a gre device which had dev->header_ops->create == ipgre_header and dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any headroom, and dev_hard_header() crashed when ipgre_header() tried to prepend its header to skb->data. skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24 head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted 4.15.0-rc7-next-20180115+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282 RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000 RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0 R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180 FS: 00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_under_panic net/core/skbuff.c:114 [inline] skb_push+0xce/0xf0 net/core/skbuff.c:1714 ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879 dev_hard_header include/linux/netdevice.h:2723 [inline] pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 sock_write_iter+0x31a/0x5d0 net/socket.c:909 call_write_iter include/linux/fs.h:1775 [inline] do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653 do_iter_write+0x154/0x540 fs/read_write.c:932 vfs_writev+0x18a/0x340 fs/read_write.c:977 do_writev+0xfc/0x2a0 fs/read_write.c:1012 SYSC_writev fs/read_write.c:1085 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1082 entry_SYSCALL_64_fastpath+0x29/0xa0 Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like interfaces, but reserving space for ->needed_headroom is a more fundamental issue that needs to be addressed first. Same problem exists for __pppoe_xmit(), which also needs to take dev->needed_headroom into account in skb_cow_head(). Fixes: f5184d26 ("net: Allow netdevices to specify needed head/tailroom") Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Reviewed-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit 7c68d1a6 ] Without proper validation of DODGY packets, we might very well feed qdisc_pkt_len_init() with invalid GSO packets. tcp_hdrlen() might access out-of-bound data, so let's use skb_header_pointer() and proper checks. Whole story is described in commit d0c081b4 ("flow_dissector: properly cap thoff field") We have the goal of validating DODGY packets earlier in the stack, so we might very well revert this fix in the future. Signed-off-by:
-
Craig Gallek authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit d9b3fca2 upstream. tcp_hdrlen is wasteful if you already have a pointer to struct tcphdr. This splits the size calculation into a helper function that can be used if a struct tcphdr is already available. Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Felix Fietkau authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit ad23b750 ] Commit "net: igmp: Use correct source address on IGMPv3 reports" introduced a check to validate the source address of locally generated IGMPv3 packets. Instead of checking the local interface address directly, it uses inet_ifa_match(fl4->saddr, ifa), which checks if the address is on the local subnet (or equal to the point-to-point address if used). This breaks for point-to-point interfaces, so check against ifa->ifa_local directly. Cc: Kevin Cernekee <cernekee@chromium.org> Fixes: a46182b0 ("net: igmp: Use correct source address on IGMPv3 reports") Reported-by:
Sebastian Gottschall <s.gottschall@dd-wrt.com> Signed-off-by:
Felix Fietkau <nbd@nbd.name> Signed-off-by:
Florian Wolters <florian@florian-wolters.de> Signed-off-by:
-
Yuiko Oshino authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit a5b1379a ] Fix initialize the uninitialized tx_qlen to an appropriate value when USB Full Speed is used. Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver") Signed-off-by:
Yuiko Oshino <yuiko.oshino@microchip.com> Signed-off-by:
-
Eric Dumazet authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit 95ef498d ] In my last patch, I missed fact that cork.base.dst was not initialized in ip6_make_skb() : If ip6_setup_cork() returns an error, we might attempt a dst_release() on some random pointer. Fixes: 862c03ee ("ipv6: fix possible mem leaks in ipv6_make_skb()") Signed-off-by:
-
Mike Maloney authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit 749439bf ] The logic in __ip6_append_data() assumes that the MTU is at least large enough for the headers. A device's MTU may be adjusted after being added while sendmsg() is processing data, resulting in __ip6_append_data() seeing any MTU. For an mtu smaller than the size of the fragmentation header, the math results in a negative 'maxfraglen', which causes problems when refragmenting any previous skb in the skb_write_queue, leaving it possibly malformed. Instead sendmsg returns EINVAL when the mtu is calculated to be less than IPV6_MIN_MTU. Found by syzkaller: kernel BUG at ./include/linux/skbuff.h:2064! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 14216 Comm: syz-executor5 Not tainted 4.13.0-rc4+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801d0b68580 task.stack: ffff8801ac6b8000 RIP: 0010:__skb_pull include/linux/skbuff.h:2064 [inline] RIP: 0010:__ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: 0018:ffff8801ac6bf570 EFLAGS: 00010216 RAX: 0000000000010000 RBX: 0000000000000028 RCX: ffffc90003cce000 RDX: 00000000000001b8 RSI: ffffffff839df06f RDI: ffff8801d9478ca0 RBP: ffff8801ac6bf780 R08: ffff8801cc3f1dbc R09: 0000000000000000 R10: ffff8801ac6bf7a0 R11: 43cb4b7b1948a9e7 R12: ffff8801cc3f1dc8 R13: ffff8801cc3f1d40 R14: 0000000000001036 R15: dffffc0000000000 FS: 00007f43d740c700(0000) GS:ffff8801dc100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7834984000 CR3: 00000001d79b9000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ip6_finish_skb include/net/ipv6.h:911 [inline] udp_v6_push_pending_frames+0x255/0x390 net/ipv6/udp.c:1093 udpv6_sendmsg+0x280d/0x31a0 net/ipv6/udp.c:1363 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x352/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4512e9 RSP: 002b:00007f43d740bc08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00000000007180a8 RCX: 00000000004512e9 RDX: 000000000000002e RSI: 0000000020d08000 RDI: 0000000000000005 RBP: 0000000000000086 R08: 00000000209c1000 R09: 000000000000001c R10: 0000000000040800 R11: 0000000000000216 R12: 00000000004b9c69 R13: 00000000ffffffff R14: 0000000000000005 R15: 00000000202c2000 Code: 9e 01 fe e9 c5 e8 ff ff e8 7f 9e 01 fe e9 4a ea ff ff 48 89 f7 e8 52 9e 01 fe e9 aa eb ff ff e8 a8 b6 cf fd 0f 0b e8 a1 b6 cf fd <0f> 0b 49 8d 45 78 4d 8d 45 7c 48 89 85 78 fe ff ff 49 8d 85 ba RIP: __skb_pull include/linux/skbuff.h:2064 [inline] RSP: ffff8801ac6bf570 RIP: __ip6_make_skb+0x18cf/0x1f70 net/ipv6/ip6_output.c:1617 RSP: ffff8801ac6bf570 Reported-by:
Mike Maloney <maloney@google.com> Reviewed-by:
-
Ben Hutchings authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit e9191ffb ] Commit 513674b5 ("net: reevalulate autoflowlabel setting after sysctl setting") removed the initialisation of ipv6_pinfo::autoflowlabel and added a second flag to indicate whether this field or the net namespace default should be used. The getsockopt() handling for this case was not updated, so it currently returns 0 for all sockets for which IPV6_AUTOFLOWLABEL is not explicitly enabled. Fix it to return the effective value, whether that has been set at the socket or net namespace level. Fixes: 513674b5 ("net: reevalulate autoflowlabel setting after sysctl ...") Signed-off-by:
-
Alexey Kodanev authored
BugLink: http://bugs.launchpad.net/bugs/1754592 [ Upstream commit dd5684ec ] ccid2_hc_tx_rto_expire() timer callback always restarts the timer again and can run indefinitely (unless it is stopped outside), and after commit 120e9dab ("dccp: defer ccid_hc_tx_delete() at dismantle time"), which moved ccid_hc_tx_delete() (also includes sk_stop_timer()) from dccp_destroy_sock() to sk_destruct(), this started to happen quite often. The timer prevents releasing the socket, as a result, sk_destruct() won't be called. Found with LTP/dccp_ipsec tests running on the bonding device, which later couldn't be unloaded after the tests were completed: unregister_netdevice: waiting for bond0 to become free. Usage count = 148 Fixes: 2a91aa39 ("[DCCP] CCID2: Initial CCID2 (TCP-Like) implementation") Signed-off-by:
Alexey Kodanev <alexey.kodanev@oracle.com> Reviewed-by:
-
Thomas Gleixner authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit d5421ea4 upstream. The hrtimer interrupt code contains a hang detection and mitigation mechanism, which prevents that a long delayed hrtimer interrupt causes a continous retriggering of interrupts which prevent the system from making progress. If a hang is detected then the timer hardware is programmed with a certain delay into the future and a flag is set in the hrtimer cpu base which prevents newly enqueued timers from reprogramming the timer hardware prior to the chosen delay. The subsequent hrtimer interrupt after the delay clears the flag and resumes normal operation. If such a hang happens in the last hrtimer interrupt before a CPU is unplugged then the hang_detected flag is set and stays that way when the CPU is plugged in again. At that point the timer hardware is not armed and it cannot be armed because the hang_detected flag is still active, so nothing clears that flag. As a consequence the CPU does not receive hrtimer interrupts and no timers expire on that CPU which results in RCU stalls and other malfunctions. Clear the flag along with some other less critical members of the hrtimer cpu base to ensure starting from a clean state when a CPU is plugged in. Thanks to Paul, Sebastian and Anna-Maria for their help to get down to the root cause of that hard to reproduce heisenbug. Once understood it's trivial and certainly justifies a brown paperbag. Fixes: 41d2e494 ("hrtimer: Tune hrtimer_interrupt hang logic") Reported-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
-
Jia Zhang authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit 7e702d17 upstream. Commit b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") reduced the impact of erratum BDF90 for Broadwell model 79. The impact can be reduced further by checking the size of the last level cache portion per core. Tony: "The erratum says the problem only occurs on the large-cache SKUs. So we only need to avoid the update if we are on a big cache SKU that is also running old microcode." For more details, see erratum BDF90 in document #334165 (Intel Xeon Processor E7-8800/4800 v4 Product Family Specification Update) from September 2017. Fixes: b94b7373 ("x86/microcode/intel: Extend BDW late-loading with a revision check") Signed-off-by:
Jia Zhang <zhang.jia@linux.alibaba.com> Signed-off-by:
Tony Luck <tony.luck@intel.com> Link: https://lkml.kernel.org/r/1516321542-31161-1-git-send-email-zhang.jia@linux.alibaba.comSigned-off-by:
-
Greg KH authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit 7e040726 upstream. [resend due to me forgetting to cc: linux-api the first time around I posted these back on Feb 23] From: Greg Kroah-Hartman <gregkh@linuxfoundation.org> For some reason these values are not in the uapi header file, so any libc has to define it themselves. To prevent them from needing to do this, just have the kernel provide the correct values. Reported-by:
Elliott Hughes <enh@google.com> Signed-off-by:
Greg Hackmann <ghackmann@google.com> Signed-off-by:
-
Ben Hutchings authored
BugLink: http://bugs.launchpad.net/bugs/1754592 The backport of KAISER to 4.4 turned vsyscall emulate mode into native mode. Add a vsyscall_pgprot variable to hold the correct page protections, like Borislav and Hugh did for 3.2 and 3.18. Cc: Borislav Petkov <bp@suse.de> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
-
Thomas Meyer authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit 883354af upstream. Debian's gcc defaults to pie. The global Makefile already defines the -fno-pie option. Link UML dynamic kernel image also with -no-pie to fix the build. Signed-off-by:
Thomas Meyer <thomas@m3y3r.de> Signed-off-by:
Richard Weinberger <richard@nod.at> Cc: Bernie Innocenti <codewiz@google.com> Signed-off-by:
-
Shuah Khan authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit 90120d15 upstream. usbip driver is leaking socket pointer address in messages. Remove the messages that aren't useful and print sockfd in the ones that are useful for debugging. Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit c6688ef9 upstream. Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Validate early in get_pipe() and return failure. Reported-by:
Secunia Research <vuln@secunia.com> Signed-off-by:
-
Shuah Khan authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit 635f545a upstream. get_pipe() routine doesn't validate the input endpoint number and uses to reference ep_in and ep_out arrays. Invalid endpoint number can trigger BUG(). Range check the epnum and returning error instead of calling BUG(). Change caller stub_recv_cmd_submit() to handle the get_pipe() error return. Reported-by:
-
Andrew Goodbody authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit 21619792 upstream. Change spin_lock calls to spin_lock_irqsave to prevent attmpted recursive lock taking in interrupt context. This patch fixes Bug 109351 https://bugzilla.kernel.org/show_bug.cgi?id=109351Signed-off-by:
Andrew Goodbody <andrew.goodbody@cambrionix.com> Signed-off-by:
-
Aaron Ma authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit f5d07b9e upstream. Lenovo introduced trackpoint compatible sticks with minimum PS/2 commands. They supposed to reply with 0x02, 0x03, or 0x04 in response to the "Read Extended ID" command, so we would know not to try certain extended commands. Unfortunately even some trackpoints reporting the original IBM version (0x01 firmware 0x0e) now respond with incorrect data to the "Get Extended Buttons" command: thinkpad_acpi: ThinkPad BIOS R0DET87W (1.87 ), EC unknown thinkpad_acpi: Lenovo ThinkPad E470, model 20H1004SGE psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 0/0 Since there are no trackpoints without buttons, let's assume the trackpoint has 3 buttons when we get 0 response to the extended buttons query. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=196253Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Johannes Thumshirn authored
BugLink: http://bugs.launchpad.net/bugs/1754592 commit eef9ffdf upstream. The SCSI host byte should be shifted left by 16 in order to have scsi_decide_disposition() do the right thing (.i.e. requeue the command). Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Fixes: 661134ad ("[SCSI] libiscsi, bnx2i: make bound ep check common") Cc: Lee Duncan <lduncan@suse.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Bart Van Assche <Bart.VanAssche@sandisk.com> Cc: Chris Leech <cleech@redhat.com> Acked-by:
Lee Duncan <lduncan@suse.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
