- 23 Mar, 2015 30 commits
-
-
Takashi Iwai authored
commit 2ddee91a upstream. MacBook Air 5,2 has the same problem as MacBook Pro 8,1 where the built-in mic records only the right channel. Apply the same workaround as MBP8,1 to spread the mono channel via a Cirrus codec vendor-specific COEF setup. Reported-and-tested-by:
Vasil Zlatanov <vasil.zlatanov@gmail.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Takashi Iwai authored
commit bad994f5 upstream. CS420x codecs seem to deal only the single amps of ADC nodes even though the nodes receive multiple inputs. This leads to the inconsistent amp value after S3/S4 resume, for example. The fix is just to set codec->single_adc_amp flag. Then the driver handles these ADC amps as if single connections. Reported-and-tested-by:
-
Jakub Kicinski authored
commit a4944572 upstream. This reverts commit e4df3a0b ("i2c: core: Dispose OF IRQ mapping at client removal time") Calling irq_dispose_mapping() will destroy the mapping and disassociate the IRQ from the IRQ chip to which it belongs. Keeping it is OK, because existent mappings are reused properly. Also, this commit breaks drivers using devm* for IRQ management on OF-based systems because devm* cleanup happens in device code, after bus's remove() method returns. Signed-off-by:
Jakub Kicinski <kubakici@wp.pl> Reported-by:
Sébastien Szymanski <sebastien.szymanski@armadeus.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> [wsa: updated the commit message with findings fromt the other bug report] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Fixes: e4df3a0b [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Daniel Mack authored
commit fcdcd1de upstream. The device complies to the UAC1 standard but hides that fact with proprietary descriptors. The autodetect quirk for Roland devices catches the audio interface but misses the MIDI part, so a specific quirk is needed. Signed-off-by:
Daniel Mack <daniel@zonque.org> Reported-by:
Rafa Lafuente <rafalafuente@gmail.com> Tested-by:
Raphaël Doursenaud <raphael@doursenaud.fr> Signed-off-by:
-
Takashi Iwai authored
commit be3bb823 upstream. There was no check about the id string of user control elements, so we accepted even a control element with an empty string, which is obviously bogus. This patch adds more sanity checks of id strings. Signed-off-by:
-
Thomas Hellstrom authored
commit 3458390b upstream. To take down the MOB and GMR memory types, the driver may have to issue fence objects and thus make sure that the fence manager is taken down after those memory types. Reorder device init accordingly. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Sinclair Yeh <syeh@vmware.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 5151adb3 upstream. Experimental lockdep annotation added to the TTM lock has unveiled a couple of lock dependency violations in the vmwgfx driver. In both cases it turns out that the device_private::reservation_sem is not needed so the offending code is moved out of that lock. Acked-by:
-
Takashi Iwai authored
commit ddb6ca75 upstream. Compaq Presario CQ60 laptop with CX20561 gives a wrong pin for the built-in mic NID 0x17 instead of NID 0x1d, and it results in the non-working mic. This patch just remaps the pin correctly via fixup. Bugzilla: https://bugzilla.opensuse.org/show_bug.cgi?id=920604Signed-off-by:
-
Jan Beulich authored
commit af6fc858 upstream. Otherwise the guest can abuse that control to cause e.g. PCIe Unsupported Request responses by disabling memory and/or I/O decoding and subsequently causing (CPU side) accesses to the respective address ranges, which (depending on system configuration) may be fatal to the host. Note that to alter any of the bits collected together as PCI_COMMAND_GUEST permissive mode is now required to be enabled globally or on the specific device. This is CVE-2015-2150 / XSA-120. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Christian König authored
commit a17d4996 upstream. Just keep it working, seems to fix some PLL problems. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73378Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Peter Chen authored
commit 2de9dd03 upstream. USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's parent reg, it fixed a bug that the voltage of vbus is incorrect due to swbst_reg is disabled after boots up. Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
-
Peter Chen authored
commit 40f73779 upstream. USB vbus 5V is from PMIC SWBST, so set swbst_reg as vbus's parent reg, it fixed a bug that the voltage of vbus is incorrect due to swbst_reg is disabled after boots up. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 524a3868 upstream. Some archs (specifically PowerPC), are sensitive with the ordering of the enabling of the calls to function tracing and setting of the function to use to be traced. That is, update_ftrace_function() sets what function the ftrace_caller trampoline should call. Some archs require this to be set before calling ftrace_run_update_code(). Another bug was discovered, that ftrace_startup_sysctl() called ftrace_run_update_code() directly. If the function the ftrace_caller trampoline changes, then it will not be updated. Instead a call to ftrace_startup_enable() should be called because it tests to see if the callback changed since the code was disabled, and will tell the arch to update appropriately. Most archs do not need this notification, but PowerPC does. The problem could be seen by the following commands: # echo 0 > /proc/sys/kernel/ftrace_enabled # echo function > /sys/kernel/debug/tracing/current_tracer # echo 1 > /proc/sys/kernel/ftrace_enabled # cat /sys/kernel/debug/tracing/trace The trace will show that function tracing was not active. Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Pratyush Anand authored
commit 1619dc3f upstream. When ftrace is enabled globally through the proc interface, we must check if ftrace_graph_active is set. If it is set, then we should also pass the FTRACE_START_FUNC_RET command to ftrace_run_update_code(). Similarly, when ftrace is disabled globally through the proc interface, we must check if ftrace_graph_active is set. If it is set, then we should also pass the FTRACE_STOP_FUNC_RET command to ftrace_run_update_code(). Consider the following situation. # echo 0 > /proc/sys/kernel/ftrace_enabled After this ftrace_enabled = 0. # echo function_graph > /sys/kernel/debug/tracing/current_tracer Since ftrace_enabled = 0, ftrace_enable_ftrace_graph_caller() is never called. # echo 1 > /proc/sys/kernel/ftrace_enabled Now ftrace_enabled will be set to true, but still ftrace_enable_ftrace_graph_caller() will not be called, which is not desired. Further if we execute the following after this: # echo nop > /sys/kernel/debug/tracing/current_tracer Now since ftrace_enabled is set it will call ftrace_disable_ftrace_graph_caller(), which causes a kernel warning on the ARM platform. On the ARM platform, when ftrace_enable_ftrace_graph_caller() is called, it checks whether the old instruction is a nop or not. If it's not a nop, then it returns an error. If it is a nop then it replaces instruction at that address with a branch to ftrace_graph_caller. ftrace_disable_ftrace_graph_caller() behaves just the opposite. Therefore, if generic ftrace code ever calls either ftrace_enable_ftrace_graph_caller() or ftrace_disable_ftrace_graph_caller() consecutively two times in a row, then it will return an error, which will cause the generic ftrace code to raise a warning. Note, x86 does not have an issue with this because the architecture specific code for ftrace_enable_ftrace_graph_caller() and ftrace_disable_ftrace_graph_caller() does not check the previous state, and calling either of these functions twice in a row has no ill effect. Link: http://lkml.kernel.org/r/e4fbe64cdac0dd0e86a3bf914b0f83c0b419f146.1425666454.git.panand@redhat.comSigned-off-by:
Pratyush Anand <panand@redhat.com> [ removed extra if (ftrace_start_up) and defined ftrace_graph_active as 0 if CONFIG_FUNCTION_GRAPH_TRACER is not set. ] Signed-off-by:
-
Ahmed S. Darwish authored
commit 2fec5104 upstream. The Kvaser firmware can only read and write messages that are not crossing the USB endpoint's wMaxPacketSize boundary. While receiving commands from the CAN device, if the next command in the same URB buffer crossed that max packet size boundary, the firmware puts a zero-length placeholder command in its place then moves the real command to the next boundary mark. The driver did not recognize such behavior, leading to missing a good number of rx events during a heavy rx load session. Moreover, a tx URB context only gets freed upon receiving its respective tx ACK event. Over time, the free tx URB contexts pool gets depleted due to the missing ACK events. Consequently, the netif transmission queue gets __permanently__ stopped; no frames could be sent again except after restarting the CAN newtwork interface. Signed-off-by:
Ahmed S. Darwish <ahmed.darwish@valeo.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
Ahmed S. Darwish authored
commit deb2701c upstream. Upon a URB submission failure, the driver calls usb_free_urb() but then manually frees the URB buffer by itself. Meanwhile usb_free_urb() has alredy freed out that transfer buffer since we're the only code path holding a reference to this URB. Remove two of such invalid manual free(). Signed-off-by:
-
Oliver Hartkopp authored
commit 96943901 upstream. When accessing CAN network interfaces with AF_PACKET sockets e.g. by dhclient this can lead to a skb_under_panic due to missing skb initialisations. Add the missing initialisations at the CAN skbuff creation times on driver level (rx path) and in the network layer (tx path). Reported-by:
Austin Schuh <austin@peloton-tech.com> Reported-by:
Daniel Steer <daniel.steer@mclaren.com> Signed-off-by:
Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by:
-
Takashi Iwai authored
commit a1f3f1ca upstream. The commit [63e51fd7: ALSA: hda - Don't take unresponsive D3 transition too serious] introduced a conditional fallback behavior to the HD-audio controller depending on the flag set. However, it introduced a silly bug, too, that the flag was evaluated in a reverse way. This resulted in a regression of HD-audio controller driver where it can't go to the fallback mode at communication errors. Unfortunately (or fortunately?) this didn't come up until recently because the affected code path is an error handling that happens only on an unstable hardware chip. Most of recent chips work stably, thus they didn't hit this problem. Now, we've got a regression report with a VIA chip, and this seems indeed requiring the fallback to the polling mode, and finally the bug was revealed. The fix is a oneliner to remove the wrong logical NOT in the check. (Lesson learned - be careful about double negation.) The bug should be backported to stable, but the patch won't be applicable to 3.13 or earlier because of the code splits. The stable fix patches for earlier kernels will be posted later manually. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=94021 Fixes: 63e51fd7 ('ALSA: hda - Don't take unresponsive D3 transition too serious') Signed-off-by:
-
Maxime Ripard authored
commit 5724be84 upstream. On the Cortex-A9-based Armada SoCs, the MPIC is not the primary interrupt controller. Yet, it still has to handle some per-cpu interrupt. To do so, it is chained with the GIC using a per-cpu interrupt. However, the current code only call irq_set_chained_handler, which is called and enable that interrupt only on the boot CPU, which means that the parent per-CPU interrupt is never unmasked on the secondary CPUs, preventing the per-CPU interrupt to actually work as expected. This was not seen until now since the only MPIC PPI users were the Marvell timers that were not working, but not used either since the system use the ARM TWD by default, and the ethernet controllers, that are faking there interrupts as SPI, and don't really expect to have interrupts on the secondary cores anyway. Add a CPU notifier that will enable the PPI on the secondary cores when they are brought up. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Link: https://lkml.kernel.org/r/1425378443-28822-1-git-send-email-maxime.ripard@free-electrons.comSigned-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
James Bottomley authored
commit 6302ce4d upstream. This crash was reported: [ 366.947370] sd 3:0:1:0: [sdb] Spinning up disk.... [ 368.804046] BUG: unable to handle kernel NULL pointer dereference at (null) [ 368.804072] IP: [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804098] PGD 0 [ 368.804114] Oops: 0002 [#1] SMP [ 368.804143] CPU 1 [ 368.804151] Modules linked in: sg netconsole s3g(PO) uinput joydev hid_multitouch usbhid hid snd_hda_codec_via cpufreq_userspace cpufreq_powersave cpufreq_stats uhci_hcd cpufreq_conservative snd_hda_intel snd_hda_codec snd_hwdep snd_pcm sdhci_pci snd_page_alloc sdhci snd_timer snd psmouse evdev serio_raw pcspkr soundcore xhci_hcd shpchp s3g_drm(O) mvsas mmc_core ahci libahci drm i2c_core acpi_cpufreq mperf video processor button thermal_sys dm_dmirror exfat_fs exfat_core dm_zcache dm_mod padlock_aes aes_generic padlock_sha iscsi_target_mod target_core_mod configfs sswipe libsas libata scsi_transport_sas picdev via_cputemp hwmon_vid fuse parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif usb_storage scsi_mod ehci_hcd usbcore usb_common [ 368.804749] [ 368.804764] Pid: 392, comm: kworker/u:3 Tainted: P W O 3.4.87-logicube-ng.22 #1 To be filled by O.E.M. To be filled by O.E.M./EPIA-M920 [ 368.804802] RIP: 0010:[<ffffffff81358457>] [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.804827] RSP: 0018:ffff880117001cc0 EFLAGS: 00010246 [ 368.804842] RAX: 0000000000000000 RBX: ffff8801185030d0 RCX: ffff88008edcb420 [ 368.804857] RDX: 0000000000000000 RSI: 0000000000000002 RDI: ffff8801185030d4 [ 368.804873] RBP: ffff8801181531c0 R08: 0000000000000020 R09: 00000000fffffffe [ 368.804885] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8801185030d4 [ 368.804899] R13: 0000000000000002 R14: ffff880117001fd8 R15: ffff8801185030d8 [ 368.804916] FS: 0000000000000000(0000) GS:ffff88011fc80000(0000) knlGS:0000000000000000 [ 368.804931] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 368.804946] CR2: 0000000000000000 CR3: 000000000160b000 CR4: 00000000000006e0 [ 368.804962] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 368.804978] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 368.804995] Process kworker/u:3 (pid: 392, threadinfo ffff880117000000, task ffff8801181531c0) [ 368.805009] Stack: [ 368.805017] ffff8801185030d8 0000000000000000 ffffffff8161ddf0 ffffffff81056f7c [ 368.805062] 000000000000b503 ffff8801185030d0 ffff880118503000 0000000000000000 [ 368.805100] ffff8801185030d0 ffff8801188b8000 ffff88008edcb420 ffffffff813583ac [ 368.805135] Call Trace: [ 368.805153] [<ffffffff81056f7c>] ? up+0xb/0x33 [ 368.805168] [<ffffffff813583ac>] ? mutex_lock+0x16/0x25 [ 368.805194] [<ffffffffa018c414>] ? smp_execute_task+0x4e/0x222 [libsas] [ 368.805217] [<ffffffffa018ce1c>] ? sas_find_bcast_dev+0x3c/0x15d [libsas] [ 368.805240] [<ffffffffa018ce4f>] ? sas_find_bcast_dev+0x6f/0x15d [libsas] [ 368.805264] [<ffffffffa018e989>] ? sas_ex_revalidate_domain+0x37/0x2ec [libsas] [ 368.805280] [<ffffffff81355a2a>] ? printk+0x43/0x48 [ 368.805296] [<ffffffff81359a65>] ? _raw_spin_unlock_irqrestore+0xc/0xd [ 368.805318] [<ffffffffa018b767>] ? sas_revalidate_domain+0x85/0xb6 [libsas] [ 368.805336] [<ffffffff8104e5d9>] ? process_one_work+0x151/0x27c [ 368.805351] [<ffffffff8104f6cd>] ? worker_thread+0xbb/0x152 [ 368.805366] [<ffffffff8104f612>] ? manage_workers.isra.29+0x163/0x163 [ 368.805382] [<ffffffff81052c4e>] ? kthread+0x79/0x81 [ 368.805399] [<ffffffff8135fea4>] ? kernel_thread_helper+0x4/0x10 [ 368.805416] [<ffffffff81052bd5>] ? kthread_flush_work_fn+0x9/0x9 [ 368.805431] [<ffffffff8135fea0>] ? gs_change+0x13/0x13 [ 368.805442] Code: 83 7d 30 63 7e 04 f3 90 eb ab 4c 8d 63 04 4c 8d 7b 08 4c 89 e7 e8 fa 15 00 00 48 8b 43 10 4c 89 3c 24 48 89 63 10 48 89 44 24 08 <48> 89 20 83 c8 ff 48 89 6c 24 10 87 03 ff c8 74 35 4d 89 ee 41 [ 368.805851] RIP [<ffffffff81358457>] __mutex_lock_common.isra.7+0x9c/0x15b [ 368.805877] RSP <ffff880117001cc0> [ 368.805886] CR2: 0000000000000000 [ 368.805899] ---[ end trace b720682065d8f4cc ]--- It's directly caused by 89d3cf6a [SCSI] libsas: add mutex for SMP task execution, but shows a deeper cause: expander functions expect to be able to cast to and treat domain devices as expanders. The correct fix is to only do expander discover when we know we've got an expander device to avoid wrongly casting a non-expander device. Reported-by:
Praveen Murali <pmurali@logicube.com> Tested-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
jmlatten@linux.vnet.ibm.com authored
commit 62dfd912 upstream. Problem: When IMA and VTPM are both enabled in kernel config, kernel hangs during bootup on LE OS. Why?: IMA calls tpm_pcr_read() which results in tpm_ibmvtpm_send and tpm_ibmtpm_recv getting called. A trace showed that tpm_ibmtpm_recv was hanging. Resolution: tpm_ibmtpm_recv was hanging because tpm_ibmvtpm_send was sending CRQ message that probably did not make much sense to phype because of Endianness. The fix below sends correctly converted CRQ for LE. This was not caught before because it seems IMA is not enabled by default in kernel config and IMA exercises this particular code path in vtpm. Tested with IMA and VTPM enabled in kernel config and VTPM enabled on both a BE OS and a LE OS ppc64 lpar. This exercised CRQ and TPM command code paths in vtpm. Patch is against Peter's tpmdd tree on github which included Vicky's previous vtpm le patches. Signed-off-by:
Joy Latten <jmlatten@linux.vnet.ibm.com> Reviewed-by:
Ashley Lai <ashley@ahsleylai.com> Signed-off-by:
Peter Huewe <peterhuewe@gmx.de> Signed-off-by:
-
Alexander Sverdlin authored
commit cd6fa8d2 upstream. Commit fd316941 ("spi/pl022: disable port when unused") introduced a race, which leads to possible driver lock up (easily reproducible on SMP). The problem happens in giveback() function where the completion of the transfer is signalled to SPI subsystem and then the HW SPI controller is disabled. Another transfer might be setup in between, which brings driver in locked-up state. Exact event sequence on SMP: core0 core1 => pump_transfers() /* message->state == STATE_DONE */ => giveback() => spi_finalize_current_message() => pl022_unprepare_transfer_hardware() => pl022_transfer_one_message => flush() => do_interrupt_dma_transfer() => set_up_next_transfer() /* Enable SSP, turn on interrupts */ writew((readw(SSP_CR1(pl022->virtbase)) | SSP_CR1_MASK_SSE), SSP_CR1(pl022->virtbase)); ... => pl022_interrupt_handler() => readwriter() /* disable the SPI/SSP operation */ => writew((readw(SSP_CR1(pl022->virtbase)) & (~SSP_CR1_MASK_SSE)), SSP_CR1(pl022->virtbase)); Lockup! SPI controller is disabled and the data will never be received. Whole SPI subsystem is waiting for transfer ACK and blocked. So, only signal transfer completion after disabling the controller. Fixes: fd316941 (spi/pl022: disable port when unused) Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Juergen Gross authored
commit 85e40b05 upstream. Using the pvops kernel a NULL pointer dereference was detected on a large machine (144 processors) when booting as dom0 in evtchn_fifo_unmask() during assignment of a pirq. The event channel in question was the first to need a new entry in event_array[] in events_fifo.c. Unfortunately xen_irq_info_pirq_setup() is called with evtchn being 0 for a new pirq and the real event channel number is assigned to the pirq only during __startup_pirq(). It is mandatory to call xen_evtchn_port_setup() after assigning the event channel number to the pirq to make sure all memory needed for the event channel is allocated. Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
Brian King authored
commit da293700 upstream. EEH recovery for bnx2x based adapters is not reliable on all Power systems using the default hot reset, which can result in an unrecoverable EEH error. Forcing the use of fundamental reset during EEH recovery fixes this. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Tejun Heo authored
commit 8603e1b3 upstream. cancel[_delayed]_work_sync() are implemented using __cancel_work_timer() which grabs the PENDING bit using try_to_grab_pending() and then flushes the work item with PENDING set to prevent the on-going execution of the work item from requeueing itself. try_to_grab_pending() can always grab PENDING bit without blocking except when someone else is doing the above flushing during cancelation. In that case, try_to_grab_pending() returns -ENOENT. In this case, __cancel_work_timer() currently invokes flush_work(). The assumption is that the completion of the work item is what the other canceling task would be waiting for too and thus waiting for the same condition and retrying should allow forward progress without excessive busy looping Unfortunately, this doesn't work if preemption is disabled or the latter task has real time priority. Let's say task A just got woken up from flush_work() by the completion of the target work item. If, before task A starts executing, task B gets scheduled and invokes __cancel_work_timer() on the same work item, its try_to_grab_pending() will return -ENOENT as the work item is still being canceled by task A and flush_work() will also immediately return false as the work item is no longer executing. This puts task B in a busy loop possibly preventing task A from executing and clearing the canceling state on the work item leading to a hang. task A task B worker executing work __cancel_work_timer() try_to_grab_pending() set work CANCELING flush_work() block for work completion completion, wakes up A __cancel_work_timer() while (forever) { try_to_grab_pending() -ENOENT as work is being canceled flush_work() false as work is no longer executing } This patch removes the possible hang by updating __cancel_work_timer() to explicitly wait for clearing of CANCELING rather than invoking flush_work() after try_to_grab_pending() fails with -ENOENT. Link: http://lkml.kernel.org/g/20150206171156.GA8942@axis.com v3: bit_waitqueue() can't be used for work items defined in vmalloc area. Switched to custom wake function which matches the target work item and exclusive wait and wakeup. v2: v1 used wake_up() on bit_waitqueue() which leads to NULL deref if the target bit waitqueue has wait_bit_queue's on it. Use DEFINE_WAIT_BIT() and __wake_up_bit() instead. Reported by Tomeu Vizoso. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Rabin Vincent <rabin.vincent@axis.com> Cc: Tomeu Vizoso <tomeu.vizoso@gmail.com> Tested-by:
Jesper Nilsson <jesper.nilsson@axis.com> Tested-by:
-
Jason Low authored
commit 283cb41f upstream. The cpuset.sched_relax_domain_level can control how far we do immediate load balancing on a system. However, it was found on recent kernels that echo'ing a value into cpuset.sched_relax_domain_level did not reduce any immediate load balancing. The reason this occurred was because the update_domain_attr_tree() traversal did not update for the "top_cpuset". This resulted in nothing being changed when modifying the sched_relax_domain_level parameter. This patch is able to address that problem by having update_domain_attr_tree() allow updates for the root in the cpuset traversal. Fixes: fc560a26 ("cpuset: replace cpuset->stack_list with cpuset_for_each_descendant_pre()") Signed-off-by:
Jason Low <jason.low2@hp.com> Signed-off-by:
Zefan Li <lizefan@huawei.com> Signed-off-by:
Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by:
-
Maxime Ripard authored
commit 8dad0386 upstream. The NDDB register holds the data that are needed by the read and write commands. However, during a read PIO access, the datasheet specifies that after each 32 bytes read in that register, when BCH is enabled, we have to make sure that the RDDREQ bit is set in the NDSR register. This fixes an issue that was seen on the Armada 385, and presumably other mvebu SoCs, when a read on a newly erased page would end up in the driver reporting a timeout from the NAND. Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by:
Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Torsten Fleischer authored
commit 76e1d14b upstream. Additionally to the current DMA transfer the PDC allows to set up a next DMA transfer. This is useful for larger SPI transfers. The driver currently waits for ENDRX as end of the transfer. But ENDRX is set when the current DMA transfer is done (RCR = 0), i.e. it doesn't include the next DMA transfer. Thus a subsequent SPI transfer could be started although there is currently a transfer in progress. This can cause invalid accesses to the SPI slave devices and to SPI transfer errors. This issue has been observed on a hardware with a M25P128 SPI NOR flash. So instead of ENDRX we should wait for RXBUFF. This flag is set if there is no more DMA transfer in progress (RCR = RNCR = 0). Signed-off-by:
Torsten Fleischer <torfl6749@gmail.com> Signed-off-by:
-
Andy Shevchenko authored
commit 9d239d35 upstream. The commit d297933c (spi: dw: Fix detecting FIFO depth) tries to fix the logic of the FIFO detection based on the description on the comments. However, there is a slight difference between numbers in TX Level and TX FIFO size. So, by specification the FIFO size would be in a range 2-256 bytes. From TX Level prospective it means we can set threshold in the range 0-(FIFO size - 1) bytes. Hence there are currently two issues: a) FIFO size 2 bytes is actually skipped since TX Level is 1 bit and could be either 0 or 1 byte; b) FIFO size is incorrectly decreased by 1 which already done by meaning of TX Level register. This patch fixes it eventually right. Fixes: d297933c (spi: dw: Fix detecting FIFO depth) Reviewed-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Sasha Levin authored
commit 4efe874a upstream. When printing the driver_override parameter when it is 4095 and 4094 bytes long, the printing code would access invalid memory because we need count+1 bytes for printing. Fixes: 782a985d ("PCI: Introduce new device binding path using pci_dev.driver_override") Signed-off-by:
Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Alex Williamson <alex.williamson@redhat.com> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Alexander Graf <agraf@suse.de> CC: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
- 20 Mar, 2015 4 commits
-
-
Sabrina Dubroca authored
commit d1e158e2 upstream. info is in network byte order, change it back to host byte order before use. In particular, the current code sets the MTU of the tunnel to a wrong (too big) value. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Marcelo Leitner authored
commit 61132bf7 upstream. Currently qlge_update_hw_vlan_features() will always first put the interface down, then update features and then bring it up again. But it is possible to hit this code while the adapter is down and this causes a non-paired call to napi_disable(), which will get stuck. This patch fixes it by skipping these down/up actions if the interface is already down. Fixes: a45adbe8 ("qlge: Enhance nested VLAN (Q-in-Q) handling.") Cc: Harish Patil <harish.patil@qlogic.com> Signed-off-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
commit 3f2ab135 upstream. When creating a bpf classifier in tc with priority collisions and invoking automatic unique handle assignment, cls_bpf_grab_new_handle() will return a wrong handle id which in fact is non-unique. Usually altering of specific filters is being addressed over major id, but in case of collisions we result in a filter chain, where handle ids address individual cls_bpf_progs inside the classifier. Issue is, in cls_bpf_grab_new_handle() we probe for head->hgen handle in cls_bpf_get() and in case we found a free handle, we're supposed to use exactly head->hgen. In case of insufficient numbers of handles, we bail out later as handle id 0 is not allowed. Fixes: 7d1d65cb ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Alexei Starovoitov <ast@plumgrid.com> Signed-off-by:
-
Daniel Borkmann authored
commit 7913ecf6 upstream. In cls_bpf_modify_existing(), we read out the number of filter blocks, do some sanity checks, allocate a block on that size, and copy over the BPF instruction blob from user space, then pass everything through the classic BPF checker prior to installation of the classifier. We should reject mismatches here, there are 2 scenarios: the number of filter blocks could be smaller than the provided instruction blob, so we do a partial copy of the BPF program, and thus the instructions will either be rejected from the verifier or a valid BPF program will be run; in the other case, we'll end up copying more than we're supposed to, and most likely the trailing garbage will be rejected by the verifier as well (i.e. we need to fit instruction pattern, ret {A,K} needs to be last instruction, load/stores must be correct, etc); in case not, we would leak memory when dumping back instruction patterns. The code should have only used nla_len() as Dave noted to avoid this from the beginning. Anyway, lets fix it by rejecting such load attempts. Fixes: 7d1d65cb ("net: sched: cls_bpf: add BPF-based classifier") Signed-off-by:
-
- 18 Mar, 2015 6 commits
-
-
Sergey Ryazanov authored
commit 8bfae4f9 upstream. Sometimes while CPU have some load and ath5k doing the wireless interface reset the whole WiSoC completely freezes. Set of tests shows that using atomic delay function while we wait interface reset helps to avoid such freezes. The easiest way to reproduce this issue: create a station interface, start continous scan with wpa_supplicant and load CPU by something. Or just create multiple station interfaces and put them all in continous scan. This patch partially reverts the commit 1846ac3d ("ath5k: Use usleep_range where possible"), which replaces initial udelay() by usleep_range(). I do not know actual source of this issue, but all looks like that HW freeze is caused by transaction on internal SoC bus, while wireless block is in reset state. Also I should note that I do not know how many chips are affected, but I did not see this issue with chips, other than AR5312. CC: Jiri Slaby <jirislaby@gmail.com> CC: Nick Kossifidis <mickflemm@gmail.com> CC: Luis R. Rodriguez <mcgrof@do-not-panic.com> Fixes: 1846ac3d ("ath5k: Use usleep_range where possible") Reported-by:
Christophe Prevotaux <c.prevotaux@rural-networks.com> Tested-by:
Eric Bree <ebree@nltinc.com> Signed-off-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Chuck Lever authored
commit 813b00d6 upstream. Other code that accesses rq_bc_pa_list holds xprt->bc_pa_lock. xprt_complete_bc_request() should do the same. Fixes: 2ea24497 ("SUNRPC: RPC callbacks may be split . . .") Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
David Ramos authored
commit a1d1e9be upstream. Our UC-KLEE tool found a kernel memory leak of 512 bytes (on x86_64) for each call to gssp_accept_sec_context_upcall() (net/sunrpc/auth_gss/gss_rpc_upcall.c). Since it appears that this call can be triggered by remote connections (at least, from a cursory a glance at the call chain), it may be exploitable to cause kernel memory exhaustion. We found the bug in kernel 3.16.3, but it appears to date back to commit 9dfd87da (2013-08-20). The gssp_accept_sec_context_upcall() function performs a pair of calls to gssp_alloc_receive_pages() and gssp_free_receive_pages(). The first allocates memory for arg->pages. The second then frees the pages pointed to by the arg->pages array, but not the array itself. Reported-by:
David A. Ramos <daramos@stanford.edu> Fixes: 9dfd87da ("rpc: fix huge kmalloc's in gss-proxy”) Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Al Viro authored
commit 1711fd9a upstream. POLL_OUT isn't what callers of ->poll() are expecting to see; it's actually __SI_POLL | 2 and it's a siginfo code, not a poll bitmap bit... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: Bruce Fields <bfields@fieldses.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Johan Hovold authored
commit 79fbf4a5 upstream. Fix overflow bug in tty_wait_until_sent on 64-bit machines, where an infinite timeout (0) would be passed to the underlying tty-driver's wait_until_sent-operation as a negative timeout (-1), causing it to return immediately. This manifests itself for example as tcdrain() returning immediately, drivers not honouring the drain flags when setting terminal attributes, or even dropped data on close as a requested infinite closing-wait timeout would be ignored. The first symptom was reported by Asier LLANO who noted that tcdrain() returned prematurely when using the ftdi_sio usb-serial driver. Fix this by passing 0 rather than MAX_SCHEDULE_TIMEOUT (LONG_MAX) to the underlying tty driver. Note that the serial-core wait_until_sent-implementation is not affected by this bug due to a lucky chance (comparison to an unsigned maximum timeout), and neither is the cyclades one that had an explicit check for negative timeouts, but all other tty drivers appear to be affected. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by:
ZIV-Asier Llano Palacios <asier.llano@cgglobal.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Johan Hovold authored
commit f528bf4f upstream. Make sure to handle an infinite timeout (0). Note that wait_until_sent is currently never called with a 0-timeout argument due to a bug in tty_wait_until_sent. Fixes: dcf01050 ("USB: serial: add generic wait_until_sent implementation") Signed-off-by:
-
