- 02 May, 2023 9 commits
-
-
André Apitzsch authored
In some configurations the touch controller can support the touch keys. Document the linux,keycodes property that enables those keys and specifies the keycodes that should be used to report the key events. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
André Apitzsch <git@apitzsch.eu> Link: https://lore.kernel.org/r/20230407-atmel_keys-v2-1-92446a4343cb@apitzsch.euSigned-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com>
-
Michał Mirosław authored
<linux/i8042.h> include uses ENODEV when included with !IS_ENABLED(CONFIG_SERIO_I8042) and so need to include it. Signed-off-by:
Michał Mirosław <mirq-linux@rere.qmqm.pl> Link: https://lore.kernel.org/r/49fd4d400d1ab62095e5ed75a6637f883c0d071b.1682795105.git.mirq-linux@rere.qmqm.plSigned-off-by:
-
Duoming Zhou authored
The watchdog_timer can schedule tx_timeout_task and watchdog_work can also arm watchdog_timer. The process is shown below: ----------- timer schedules work ------------ cyttsp4_watchdog_timer() //timer handler schedule_work(&cd->watchdog_work) ----------- work arms timer ------------ cyttsp4_watchdog_work() //workqueue callback function cyttsp4_start_wd_timer() mod_timer(&cd->watchdog_timer, ...) Although del_timer_sync() and cancel_work_sync() are called in cyttsp4_remove(), the timer and workqueue could still be rearmed. As a result, the possible use after free bugs could happen. The process is shown below: (cleanup routine) | (timer and workqueue routine) cyttsp4_remove() | cyttsp4_watchdog_timer() //timer cyttsp4_stop_wd_timer() | schedule_work() del_timer_sync() | | cyttsp4_watchdog_work() //worker | cyttsp4_start_wd_timer() | mod_timer() cancel_work_sync() | | cyttsp4_watchdog_timer() //timer | schedule_work() del_timer_sync() | kfree(cd) //FREE | | cyttsp4_watchdog_work() // reschedule! | cd-> //USE This patch changes del_timer_sync() to timer_shutdown_sync(), which could prevent rearming of the timer from the workqueue. Fixes: 17fb1563 ("Input: cyttsp4 - add core driver for Cypress TMA4XX touchscreen devices") Signed-off-by:Duoming Zhou <duoming@zju.edu.cn> Link: https://lore.kernel.org/r/20230421082919.8471-1-duoming@zju.edu.cnSigned-off-by:
-
Maximilian Weigand authored
The touchscreen can be used to wake up systems from sleep and therefore the wakeup-source entry should be included in the documentation. Signed-off-by:
Maximilian Weigand <mweigand@mweigand.net> Reviewed-by:
Alistair Francis <alistair@alistair23.me> Reviewed-by:
-
Maximilian Weigand authored
The removed lines are remnants of the vendor driver and are not used in the upstream driver. Signed-off-by:
-
Luca Weiss authored
First of all, previously the 16-bit magnitude was written as-is to the device which actually discarded the upper 8 bits since the device has 8-bit registers only. This meant that a strong_magnitude of 0xFF00 would result in 0. To correct this shift the strong_magnitude / weak_magnitude input values so we discard the lower 8 bits and keep the upper bits instead. Secondly the RTP mode that is used by default interprets the values as signed (2s complement), so 0x81 = 0%, 0x00 = 50%, 0x7F = 100%. This doesn't match the FF_RUMBLE interface at all, so let's tell the device to interpret the data as unsigned instead which gets us 0x00 = 0% and 0xFF = 100%. As last change switch ERM to using "Closed-Loop Mode, Unidirectional" instead of "Open-Loop Mode" since it's recommended by the datasheet compared to open loop and better matches our use case of 0% - 100% vibration. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230430-drv260x-improvements-v1-4-1fb28b4cc698@z3ntu.xyzSigned-off-by:
-
Luca Weiss authored
Since the driver has disabled regmap caching with REGCACHE_NONE, it's warning us that we provide defaults that are not used. Remove them. [ 0.561159] drv260x-haptics 0-005a: No cache used with register defaults set! Fixes: 7132fe4f ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by:
-
Luca Weiss authored
When doing the initial startup there's no need to poll without any delay and spam the I2C bus. Let's sleep 15ms between each attempt, which is the same time as used in the vendor driver. Fixes: 7132fe4f ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by:
-
Luca Weiss authored
ANANLOG should be ANALOG. Fix the typo. Fixes: 7132fe4f ("Input: drv260x - add TI drv260x haptics driver") Signed-off-by:
-
- 01 May, 2023 1 commit
-
-
Dmitry Torokhov authored
This reverts commit db7220c4 because it causes crashes when trying to dereference xpad->dev->dev in xpad_probe() which has not been set up yet. Reported-by: syzbot+a3f758b8d8cb7e49afec@syzkaller.appspotmail.com Reported-by:
Dongliang Mu <dzm91@hust.edu.cn> Link: https://groups.google.com/g/syzkaller-bugs/c/iMhTgpGuIbMSigned-off-by:
-
- 14 Apr, 2023 5 commits
-
-
Peng Fan authored
Convert the binding doc to dt schema, and also fixed the example from fixed-regulator to regulator-fixed. Signed-off-by:
Peng Fan <peng.fan@nxp.com> Reviewed-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230407075259.1593739-1-peng.fan@oss.nxp.comSigned-off-by:
-
Vicki Pfau authored
This commit explicitly disables the audio interface the same way the official driver does. This is needed for some controllers, such as the PowerA Enhanced Wired Controller for Series X|S (0x20d6:0x200e) to report the guide button. Signed-off-by:
Vicki Pfau <vi@endrift.com> Link: https://lore.kernel.org/r/20230411031650.960322-3-vi@endrift.comSigned-off-by:
-
Vicki Pfau authored
Wired GIP devices present multiple interfaces with the same USB identification other than the interface number. This adds constants for differentiating two of them and uses them where appropriate Signed-off-by:
-
Jiapeng Chong authored
No functional modification involved. drivers/input/rmi4/rmi_bus.c:300: warning: expecting prototype for rmi_register_function_handler(). Prototype was for __rmi_register_function_handler() instead. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Signed-off-by:
Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Link: https://lore.kernel.org/r/20230209040710.111456-1-jiapeng.chong@linux.alibaba.comSigned-off-by:
-
Miaoqian Lin authored
rpi_firmware_get() take reference, we need to release it in error paths as well. Use devm_rpi_firmware_get() helper to handling the resources. Also remove the existing rpi_firmware_put(). Fixes: 0b9f28fe ("Input: add official Raspberry Pi's touchscreen driver") Fixes: 3b8ddff7 ("input: raspberrypi-ts: Release firmware handle when not needed") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Reviewed-by:
Mattijs Korpershoek <mkorpershoek@baylibre.com> Link: https://lore.kernel.org/r/20221223074657.810346-1-linmq006@gmail.comSigned-off-by:
-
- 10 Apr, 2023 3 commits
-
-
Daniel Golle authored
After starting to use regmap API to access registers the edt-ft5x06 driver depends on symbols provided by REGMAP_I2C: edt-ft5x06.o: in function `edt_ft5x06_ts_probe': edt-ft5x06.c:1154: undefined reference to `__regmap_init_i2c' edt-ft5x06.o: in function `edt_ft5x06_ts_identify': edt-ft5x06.c:897: undefined reference to `__regmap_init_i2c' Make sure support for I2C regmap is actually selected by adding this dependency to Kconfig. Fixes: 9dfd9708 ("Input: edt-ft5x06 - convert to use regmap API") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Link: https://lore.kernel.org/r/ZDRBExF1xmxalMZc@makrotopia.orgSigned-off-by:
-
JungHoon Hyun authored
The driver had the code to differentiate between finger and palm touches, but did not use this information when reporting contacts. Change it so that proper "tool" type is assigned to reported contacts. Signed-off-by:
JungHoon Hyun <hyunjunghoon@melfas.com> Signed-off-by:
-
Jiapeng Chong authored
Function input_set_abs_params() has already set EV_ABS bit for us. drivers/input/misc/cma3000_d0x.c:328 cma3000_init() warn: inconsistent indenting. Reported-by:
-
- 03 Apr, 2023 10 commits
-
-
Dario Binacchi authored
It is pointless and expensive to calculate data in the interrupt that depends on the type of touchscreen, which is detected on the driver probe and cannot then be changed. So calculate the size of the data buffer on the driver probe, as well as the data retrieval command, and then use them in the ISR. Signed-off-by:
Dario Binacchi <dario.binacchi@amarulasolutions.com> Link: https://lore.kernel.org/r/20230402200951.1032513-10-dario.binacchi@amarulasolutions.comSigned-off-by:
-
Dario Binacchi authored
With this patch, the CRC is always verified by the same function, even in the case of accessing registers where the number of bytes is minimal. Signed-off-by:
-
Dario Binacchi authored
It replaces custom read/write functions with regmap API, making the driver code more generic. Signed-off-by:
-
Dario Binacchi authored
In some parts of the code, error messages were improperly printed with dev_dbg() calls. In those cases, dev_dbg() has been replaced with dev_err(). Signed-off-by:
-
Dario Binacchi authored
The use of the macros M06_REG_ADDR and M06_REG_CMD avoids code duplication without impacting the application load, and reduces the chances of errors or mistakes. Signed-off-by:
-
Dario Binacchi authored
There is no need to recalculate the CRC when the data has not changed. Signed-off-by:
-
Dario Binacchi authored
It adds spaces around '-' as recommended by the Linux coding style. Signed-off-by:
-
Dario Binacchi authored
It removes unnecessary blank lines so that checkpatch doesn't complain anymore. Signed-off-by:
-
Dario Binacchi authored
Matches the alignment to the open parenthesis as suggested by checkpatch. Signed-off-by:
-
Benjamin Bara authored
When a hard IRQ is triggered, the soft IRQ, which decides if an actual pen down happened, should always be triggered. This enables the usage of "can_sleep" GPIO chips as "pen down" GPIO, as the value is not read during the hard IRQ anymore. This might be the case if the GPIO chip is an expander behind i2c. Signed-off-by:
Benjamin Bara <benjamin.bara@skidata.com> Signed-off-by:
Richard Leitner <richard.leitner@skidata.com> Link: https://lore.kernel.org/r/20230328-tsc2007-sleep-v5-1-fc55e76d0ced@skidata.comSigned-off-by:
-
- 02 Apr, 2023 4 commits
-
-
Javier Martinez Canillas authored
The input subsystem doesn't currently have any unit tests, let's add a CONFIG_INPUT_KUNIT_TEST option that builds a test suite to be executed with the KUnit test infrastructure. For now, only three tests were added for some of the input core helper functions that are trivial to test: * input_test_polling: set/get poll interval and set-up a poll handler. * input_test_timestamp: set/get input event timestamps. * input_test_match_device_id: match a device by bus, vendor, product, version and events capable of handling. But having the minimal KUnit support allows to add more tests and suites as follow-up changes. The tests can be run with the following command: $ ./tools/testing/kunit/kunit.py run --kunitconfig=drivers/input/tests/ Signed-off-by:Javier Martinez Canillas <javierm@redhat.com> Tested-by:
Enric Balletbo i Serra <eballetbo@redhat.com> config: powerpc-allnoconfig (https://download.01.org/0day-ci/archive/20230330/202303301815.kRKFM3NH-lkp@intel.com/config) Link: https://lore.kernel.org/r/20230330081831.2291351-1-javierm@redhat.comSigned-off-by:
-
Hans de Goede authored
Add a new driver for the Novatek i2c touchscreen controller as found on the Acer Iconia One 7 B1-750 tablet. Unfortunately the touchscreen controller model-number is unknown. Even with the tablet opened up it is impossible to read the model-number. Android calls this a "NVT-ts" touchscreen, but that may apply to other Novatek controller models too. This appears to be the same controller as the one supported by https://github.com/advx9600/android/blob/master/touchscreen/NVTtouch_Android4.0/NVTtouch.c but unfortunately that does not give us a model-number either. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/20230326212308.55730-1-hdegoede@redhat.comSigned-off-by:
-
Vicki Pfau authored
Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and Gamesir-G3w, require a specific packet that the first-party XInput driver sends before it will start sending reports. It's not currently known what this packet does, but since the first-party driver always sends it's unlikely that this could cause issues with existing controllers. Co-authored-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
-
Pierre-Loup A. Griffais authored
They act that way in PC mode. Reviewed-by:
Lyude Paul <lyude@redhat.com> Signed-off-by:
Pierre-Loup A. Griffais <pgriffais@valvesoftware.com> Signed-off-by:
-
- 24 Mar, 2023 3 commits
-
-
Rob Herring authored
Cleanup bindings dropping unneeded quotes. Once all these are fixed, checking for this can be enabled in yamllint. Signed-off-by:
-
Vicki Pfau authored
This adds support for the Turtle Beach REACT-R and Recon Xbox controllers Signed-off-by:
-
Vicki Pfau authored
The list of specific VID/PID combinations for various controllers recently added a new field "xtype". However, this field isn't used, nor filled in the table itself, and was likely added by mistake and overlooked during review. Since this field isn't used, it's safe to remove. Signed-off-by:
-
- 20 Mar, 2023 1 commit
-
-
Uwe Kleine-König authored
If a platform driver's remove callback returns non-zero the driver core emits an error message. In such a case however iqs62x_keys_remove() already issued a (better) message. So return zero to suppress the generic message. This patch has no other side effects as platform_remove() ignores the return value of .remove() after the warning. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20230318225110.261439-1-u.kleine-koenig@pengutronix.deSigned-off-by:
-
- 17 Mar, 2023 4 commits
-
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/touchscreen/sun4i-ts.c:392:34: error: ‘sun4i_ts_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Link: https://lore.kernel.org/r/20230312131514.351603-3-krzysztof.kozlowski@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
The driver will match mostly by DT table (even thought there is regular ID table) so there is little benefit in of_match_ptr (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/keyboard/tm2-touchkey.c:335:34: error: ‘tm2_touchkey_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
Krzysztof Kozlowski authored
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might not be relevant here). This also fixes !CONFIG_OF error: drivers/input/keyboard/st-keyscan.c:251:34: error: ‘keyscan_of_match’ defined but not used [-Werror=unused-const-variable=] Signed-off-by:
-
