- 04 May, 2019 27 commits
-
-
Steffen Maier authored
[ Upstream commit c8206579 ] If an incoming ELS of type RSCN contains more than one element, zfcp suboptimally causes repeated erp trigger NOP trace records for each previously failed port. These could be ports that went away. It loops over each RSCN element, and for each of those in an inner loop over all zfcp_ports. The trigger to recover failed ports should be just the reception of some RSCN, no matter how many elements it has. So we can loop over failed ports separately, and only then loop over each RSCN element to handle the non-failed ports. The call chain was: zfcp_fc_incoming_rscn for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== In order the reduce the "flooding" of the REC trace area in such cases, we factor out handling the failed ports to be outside of the entries loop: zfcp_fc_incoming_rscn if (no_entries > 1) <=== list_for_each_entry(port, &adapter->port_list, list) <=== if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link Abbreviated example trace records before this code change: Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x02 Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x00 NOP => superfluous trace record The last trace entry repeats if there are more than 2 RSCN elements. Signed-off-by:
Steffen Maier <maier@linux.ibm.com> Reviewed-by:
Benjamin Block <bblock@linux.ibm.com> Reviewed-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin (Microsoft) <sashal@kernel.org>
-
Al Viro authored
[ Upstream commit daf5cc27 ] free the symlink body after the same RCU delay we have for freeing the struct inode itself, so that traversal during RCU pathwalk wouldn't step into freed memory. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Reviewed-by:
Jeff Layton <jlayton@kernel.org> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Mukesh Ojha authored
[ Upstream commit f276e002 ] if platform_driver_register fails, cleanup the allocated resource gracefully. Signed-off-by:
Mukesh Ojha <mojha@codeaurora.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Kangjie Lu authored
[ Upstream commit fba1bdd2 ] In case iscsi_lookup_endpoint fails, the fix returns -EINVAL to avoid NULL pointer dereference. Signed-off-by:
Kangjie Lu <kjlu@umn.edu> Acked-by:
Manish Rangankar <mrangankar@marvell.com> Reviewed-by:
-
Wen Yang authored
[ Upstream commit 75eac7b5 ] The call to of_get_child_by_name returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ti/netcp_ethss.c:3661:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. ./drivers/net/ethernet/ti/netcp_ethss.c:3665:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3654, but without a corresponding object release within this function. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Wen Yang authored
[ Upstream commit be693df3 ] The call to ehea_get_eth_dn returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/ibm/ehea/ehea_main.c:3163:2-8: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 3154, but without a corresponding object release within this function. Signed-off-by:
-
Wen Yang authored
[ Upstream commit fa3a419d ] The call to of_parse_phandle returns a node pointer with refcount incremented thus it must be explicitly decremented after the last usage. Detected by coccinelle with the following warnings: ./drivers/net/ethernet/xilinx/xilinx_axienet_main.c:1624:1-7: ERROR: missing of_node_put; acquired a node pointer with refcount incremented on line 1569, but without a corresponding object release within this function. Signed-off-by:
-
Trond Myklebust authored
[ Upstream commit 5a698243 ] Specifying a retrans=0 mount parameter to a NFS/TCP mount, is inadvertently causing the NFS client to rewrite any specified timeout parameter to the default of 60 seconds. Fixes: a956beda ("NFS: Allow the mount option retrans=0") Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 22c971db ] Colin King reported a bug in read_bbreg_hdl(): memcpy(pcmd->rsp, (u8 *)&val, pcmd->rspsz); The problem is that "val" is uninitialized. This code is obviously not useful, but so far as I can tell "pcmd->cmdcode" is never GEN_CMD_CODE(_Read_BBREG) so it's not harmful either. For now the easiest fix is to just call r8712_free_cmd_obj() and return. Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Reported-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 9624bafa ] The ks8851 chip's initial carrier state is down. A Link Change Interrupt is signaled once interrupts are enabled if the carrier is up. The ks8851 driver has it backwards by assuming that the initial carrier state is up. The state is therefore misrepresented if the interface is opened with no cable attached. Fix it. The Link Change interrupt is sometimes not signaled unless the P1MBSR register (which contains the Link Status bit) is read on ->ndo_open(). This might be a hardware erratum. Read the register by calling mii_check_link(), which has the desirable side effect of setting the carrier state to down if the cable was detached while the interface was closed. Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: Frank Pavlic <f.pavlic@kunbus.de> Cc: Ben Dooks <ben.dooks@codethink.co.uk> Cc: Tristram Ha <Tristram.Ha@microchip.com> Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit d268f315 ] The ks8851 driver currently requests the IRQ before registering the net_device. Because the net_device name is used as IRQ name and is still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs apart if multiple ks8851 chips are present. Most other drivers delay requesting the IRQ until the net_device is opened. Do the same. The driver doesn't enable interrupts on the chip before opening the net_device and disables them when closing it, so there doesn't seem to be a need to request the IRQ already on probe. Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 761cfa97 ] Commit 73fdeb82 ("net: ks8851: Add optional vdd_io regulator and reset gpio") amended the ks8851 driver to briefly assert the chip's reset pin on probe. It also amended the probe routine's error path to reassert the reset pin if a subsequent initialization step fails. However the commit misplaced reassertion of the reset pin in the error path such that it is not performed if the check of the Chip ID and Enable Register (CIDER) fails. The error path is therefore slightly asymmetrical to the probe routine's body. Fix it. Signed-off-by:
-
Lukas Wunner authored
[ Upstream commit 536d3680 ] The ks8851 driver lets the chip auto-dequeue received packets once they have been read in full. It achieves that by setting the ADRFE flag in the RXQCR register ("Auto-Dequeue RXQ Frame Enable"). However if allocation of a packet's socket buffer or retrieval of the packet over the SPI bus fails, the packet will not have been read in full and is not auto-dequeued. Such partial retrieval of a packet confuses the chip's RX queue management: On the next RX interrupt, the first packet read from the queue will be the one left there previously and this one can be retrieved without issues. But for any newly received packets, the frame header status and byte count registers (RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval. The chip allows explicitly dequeueing a packet from the RX queue by setting the RRXEF flag in the RXQCR register ("Release RX Error Frame"). This could be used to dequeue the packet in case of an error, but if that error is a failed SPI transfer, it is unknown if the packet was transferred in full and was auto-dequeued or if it was only transferred in part and requires an explicit dequeue. The safest approach is thus to always dequeue packets explicitly and forgo auto-dequeueing. Without this change, I've witnessed packet retrieval break completely when an SPI DMA transfer fails, requiring a chip reset. Explicit dequeueing magically fixes this and makes packet retrieval absolutely robust for me. The chip's documentation suggests auto-dequeuing and uses the RRXEF flag only to dequeue error frames which the driver doesn't want to retrieve. But that seems to be a fair-weather approach. Signed-off-by:
-
Marco Felsch authored
[ Upstream commit 032f85c9 ] Increase the reset duration to ensure correct phy functionality. The reset duration is taken from barebox commit 52fdd510de ("ARM: dts: pfla02: use long enough reset for ethernet phy"): Use a longer reset time for ethernet phy Micrel KSZ9031RNX. Otherwise a small percentage of modules have 'transmission timeouts' errors like barebox@Phytec phyFLEX-i.MX6 Quad Carrier-Board:/ ifup eth0 warning: No MAC address set. Using random address 7e:94:4d:02:f8:f3 eth0: 1000Mbps full duplex link detected eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout T eth0: transmission timeout Cc: Stefan Christ <s.christ@phytec.de> Cc: Christian Hemp <c.hemp@phytec.de> Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Fixes: 3180f956 ("ARM: dts: Phytec imx6q pfla02 and pbab01 support") Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Guido Kiener authored
[ Upstream commit 091dacc3 ] Restore the status of ep->stopped in function net2272_dequeue(). When the given request is not found in the endpoint queue the function returns -EINVAL without restoring the state of ep->stopped. Thus the endpoint keeps blocked and does not transfer any data anymore. This fix is only compile-tested, since we do not have a corresponding hardware. An analogous fix was tested in the sibling driver. See "usb: gadget: net2280: Fix net2280_dequeue()" Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Guido Kiener <guido.kiener@rohde-schwarz.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Guido Kiener authored
[ Upstream commit f1d3fba1 ] When a request must be dequeued with net2280_dequeue() e.g. due to a device clear action and the same request is finished by the function scan_dma_completions() then the function net2280_dequeue() does not find the request in the following search loop and returns the error -EINVAL without restoring the status ep->stopped. Thus the endpoint keeps blocked and does not receive any data anymore. This fix restores the status and does not issue an error message. Acked-by:
-
Guido Kiener authored
[ Upstream commit 9d6a54c1 ] The OUT endpoint normally blocks (NAK) subsequent packets when a short packet was received and returns an incomplete queue entry to the gadget driver. Thereby the gadget driver can detect a short packet when reading queue entries with a length that is not equal to a multiple of packet size. The start_queue() function enables receiving OUT packets regardless of the content of the OUT FIFO. This results in a race: With the current code, it's possible that the "!ep->is_in && (readl(&ep->regs->ep_stat) & BIT(NAK_OUT_PACKETS))" test in start_dma() will fail, then a short packet will be received, and then start_queue() will call stop_out_naking(). That's what we don't want (OUT naking gets turned off while there is data in the FIFO) because then the next driver request might receive a mixture of old and new packets. With the patch, this race can't occur because the FIFO's state is tested after we know that OUT naking is already turned on, and OUT naking is stopped only when both of the conditions are met. This ensures that all received data is delivered to the gadget driver, which can detect a short packet now before new packets are appended to the last short packet. Acked-by:
-
Petr Štetiar authored
[ Upstream commit 72ff51d8 ] Andrey has reported on OpenWrt's bug tracking system[1], that he currently can't use ar93xx_uart as pure serial UART without console (CONFIG_SERIAL_8250_CONSOLE and CONFIG_SERIAL_AR933X_CONSOLE undefined), because compilation ends with following error: ar933x_uart.c: In function 'ar933x_uart_console_write': ar933x_uart.c:550:14: error: 'struct uart_port' has no member named 'sysrq' So this patch moves all the code related to console handling behind series of CONFIG_SERIAL_AR933X_CONSOLE ifdefs. 1. https://bugs.openwrt.org/index.php?do=details&task_id=2152 Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiri Slaby <jslaby@suse.com> Cc: Andrey Batyiev <batyiev@gmail.com> Reported-by:
Andrey Batyiev <batyiev@gmail.com> Tested-by:
Petr Štetiar <ynezz@true.cz> Signed-off-by:
-
Mao Wenan authored
[ Upstream commit ac0cdb3d ] Add the missing uart_unregister_driver() and i2c_del_driver() before return from sc16is7xx_init() in the error handling case. Signed-off-by:
Mao Wenan <maowenan@huawei.com> Reviewed-by:
Vladimir Zapolskiy <vz@mleia.com> Signed-off-by:
-
Xin Long authored
[ Upstream commit e166e4fd ] Since Commit 21d1196a ("ipv4: set transport header earlier"), skb->transport_header has been always set before entering INET netfilter. This patch is to set skb->transport_header for bridge before entering INET netfilter by bridge-nf-call-iptables. It also fixes an issue that sctp_error() couldn't compute a right csum due to unset skb->transport_header. Fixes: e6d8b64b ("net: sctp: fix and consolidate SCTP checksumming code") Reported-by:
Li Shuang <shuali@redhat.com> Suggested-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 05b7639d ] Otherwise, we hit bogus ENOENT when removing elements. Fixes: e701001e ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates") Reported-by:
Václav Zindulka <vaclav.zindulka@tlapnet.cz> Signed-off-by:
-
Aditya Pakki authored
[ Upstream commit 5bf7295f ] netdev_alloc_skb can fail and return a NULL pointer which is dereferenced without a check. The patch avoids such a scenario. Signed-off-by:
Aditya Pakki <pakki001@umn.edu> Signed-off-by:
-
Martin Schwidefsky authored
[ Upstream commit cd479ecc ] For a 64-bit process the randomization of the program break is quite large with 1GB. That is as big as the randomization of the anonymous mapping base, for a test case started with '/lib/ld64.so.1 <exec>' it can happen that the heap is placed after the stack. To avoid this limit the program break randomization to 32MB for 64-bit and keep 8MB for 31-bit. Reported-by:
Stefan Liebler <stli@linux.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Helen Koike authored
[ Upstream commit 544e7841 ] Raspberry pi board model B revison 2 have the hot plug detector gpio active high (and not low as it was in the dts). Signed-off-by:
Helen Koike <helen.koike@collabora.com> Fixes: 49ac67e0 ("ARM: bcm2835: Add VC4 to the device tree.") Reviewed-by:
Eric Anholt <eric@anholt.net> Signed-off-by:
-
Hans Verkuil authored
commit ed356f11 upstream. If CEC is not enabled for the vivid driver, then the adap pointer is NULL and 'adap->phys_addr' will fail. Cc: <stable@vger.kernel.org> # for v4.12 and up Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> [ Naresh: Fixed rebase conflict ] Signed-off-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by:
-
Gustavo A. R. Silva authored
commit 61c59355 upstream. _dev_ is being dereferenced before it is null checked, hence there is a potential null pointer dereference. Fix this by moving the pointer dereference after _dev_ has been null checked. Addresses-Coverity-ID: 1462020 Fixes: bb1b40c7 ("usbnet: ipheth: prevent TX queue timeouts when device not ready") Signed-off-by:
Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Alexander Kappner authored
commit bb1b40c7 upstream. iOS devices require the host to be "trusted" before servicing network packets. Establishing trust requires the user to confirm a dialog on the iOS device.Until trust is established, the iOS device will silently discard network packets from the host. Currently, the ipheth driver does not detect whether an iOS device has established trust with the host, and immediately sets up the transmit queues. This causes the following problems: - Kernel taint due to WARN() in netdev watchdog. - Dmesg spam ("TX timeout"). - Disruption of user space networking activity (dhcpd, etc...) when new interface comes up but cannot be used. - Unnecessary host and device wakeups and USB traffic Example dmesg output: [ 1101.319778] NETDEV WATCHDOG: eth1 (ipheth): transmit queue 0 timed out [ 1101.319817] ------------[ cut here ]------------ [ 1101.319828] WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:316 dev_watchdog+0x20f/0x220 [ 1101.319831] Modules linked in: ipheth usbmon nvidia_drm(PO) nvidia_modeset(PO) nvidia(PO) iwlmvm mac80211 iwlwifi btusb btrtl btbcm btintel qmi_wwan bluetooth cfg80211 ecdh_generic thinkpad_acpi rfkill [last unloaded: ipheth] [ 1101.319861] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.13.12.1 #1 [ 1101.319864] Hardware name: LENOVO 20ENCTO1WW/20ENCTO1WW, BIOS N1EET62W (1.35 ) 11/10/2016 [ 1101.319867] task: ffffffff81e11500 task.stack: ffffffff81e00000 [ 1101.319873] RIP: 0010:dev_watchdog+0x20f/0x220 [ 1101.319876] RSP: 0018:ffff8810a3c03e98 EFLAGS: 00010292 [ 1101.319880] RAX: 000000000000003a RBX: 0000000000000000 RCX: 0000000000000000 [ 1101.319883] RDX: ffff8810a3c15c48 RSI: ffffffff81ccbfc2 RDI: 00000000ffffffff [ 1101.319886] RBP: ffff880c04ebc41c R08: 0000000000000000 R09: 0000000000000379 [ 1101.319889] R10: 00000100696589d0 R11: 0000000000000378 R12: ffff880c04ebc000 [ 1101.319892] R13: 0000000000000000 R14: 0000000000000001 R15: ffff880c2865fc80 [ 1101.319896] FS: 0000000000000000(0000) GS:ffff8810a3c00000(0000) knlGS:0000000000000000 [ 1101.319899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1101.319902] CR2: 00007f3ff24ac000 CR3: 0000000001e0a000 CR4: 00000000003406f0 [ 1101.319905] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1101.319908] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1101.319910] Call Trace: [ 1101.319914] <IRQ> [ 1101.319921] ? dev_graft_qdisc+0x70/0x70 [ 1101.319928] ? dev_graft_qdisc+0x70/0x70 [ 1101.319934] ? call_timer_fn+0x2e/0x170 [ 1101.319939] ? dev_graft_qdisc+0x70/0x70 [ 1101.319944] ? run_timer_softirq+0x1ea/0x440 [ 1101.319951] ? timerqueue_add+0x54/0x80 [ 1101.319956] ? enqueue_hrtimer+0x38/0xa0 [ 1101.319963] ? __do_softirq+0xed/0x2e7 [ 1101.319970] ? irq_exit+0xb4/0xc0 [ 1101.319976] ? smp_apic_timer_interrupt+0x39/0x50 [ 1101.319981] ? apic_timer_interrupt+0x8c/0xa0 [ 1101.319983] </IRQ> [ 1101.319992] ? cpuidle_enter_state+0xfa/0x2a0 [ 1101.319999] ? do_idle+0x1a3/0x1f0 [ 1101.320004] ? cpu_startup_entry+0x5f/0x70 [ 1101.320011] ? start_kernel+0x444/0x44c [ 1101.320017] ? early_idt_handler_array+0x120/0x120 [ 1101.320023] ? x86_64_start_kernel+0x145/0x154 [ 1101.320028] ? secondary_startup_64+0x9f/0x9f [ 1101.320033] Code: 20 04 00 00 eb 9f 4c 89 e7 c6 05 59 44 71 00 01 e8 a7 df fd ff 89 d9 4c 89 e6 48 c7 c7 70 b7 cd 81 48 89 c2 31 c0 e8 97 64 90 ff <0f> ff eb bf 66 66 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 [ 1101.320103] ---[ end trace 0cc4d251e2b57080 ]--- [ 1101.320110] ipheth 1-5:4.2: ipheth_tx_timeout: TX timeout The last message "TX timeout" is repeated every 5 seconds until trust is established or the device is disconnected, filling up dmesg. The proposed patch eliminates the problem by, upon connection, keeping the TX queue and carrier disabled until a packet is first received from the iOS device. This is reflected by the confirmed_pairing variable in the device structure. Only after at least one packet has been received from the iOS device, the transmit queue and carrier are brought up during the periodic device poll in ipheth_carrier_set. Because the iOS device will always send a packet immediately upon trust being established, this should not delay the interface becoming useable. To prevent failed UBRs in ipheth_rcvbulk_callback from perpetually re-enabling the queue if it was disabled, a new check is added so only successful transfers re-enable the queue, whereas failed transfers only trigger an immediate poll. This has the added benefit of removing the periodic control requests to the iOS device until trust has been established and thus should reduce wakeup events on both the host and the iOS device. Signed-off-by:
Alexander Kappner <agk@godking.net> Signed-off-by:
-
- 02 May, 2019 13 commits
-
-
Greg Kroah-Hartman authored
-
Diana Craciun authored
commit 26cb1f36 upstream. Currently only supported on powerpc. Signed-off-by:
Diana Craciun <diana.craciun@nxp.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Diana Craciun authored
commit e59f5bd7 upstream. Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit 997dd964 ] Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IP6 defragmentation in nf_conntrack, removing the 1280 byte restriction. Signed-off-by:
Peter Oskolkov <posk@google.com> Reported-by:
Tom Herbert <tom@herbertland.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit d4289fcc ] Currently, IPv6 defragmentation code drops non-last fragments that are smaller than 1280 bytes: see commit 0ed4229b ("ipv6: defrag: drop non-last frags smaller than min mtu") This behavior is not specified in IPv6 RFCs and appears to break compatibility with some IPv6 implemenations, as reported here: https://www.spinics.net/lists/netdev/msg543846.html This patch re-uses common IP defragmentation queueing and reassembly code in IPv6, removing the 1280 byte restriction. Signed-off-by:
-
Florian Westphal authored
[ Upstream commit 70b095c8 ] IPV6=m DEFRAG_IPV6=m CONNTRACK=y yields: net/netfilter/nf_conntrack_proto.o: In function `nf_ct_netns_do_get': net/netfilter/nf_conntrack_proto.c:802: undefined reference to `nf_defrag_ipv6_enable' net/netfilter/nf_conntrack_proto.o:(.rodata+0x640): undefined reference to `nf_conntrack_l4proto_icmpv6' Setting DEFRAG_IPV6=y causes undefined references to ip6_rhash_params ip6_frag_init and ip6_expire_frag_queue so it would be needed to force IPV6=y too. This patch gets rid of the 'followup linker error' by removing the dependency of ipv6.ko symbols from netfilter ipv6 defrag. Shared code is placed into a header, then used from both. Signed-off-by:
-
Peter Oskolkov authored
[ Upstream commit c23f35d1 ] This is a refactoring patch: without changing runtime behavior, it moves rbtree-related code from IPv4-specific files/functions into .h/.c defrag files shared with IPv6 defragmentation code. Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 415787d7 ] lockdep does not know that the locks used by IPv4 defrag and IPv6 reassembly units are of different classes. It complains because of following chains : 1) sch_direct_xmit() (lock txq->_xmit_lock) dev_hard_start_xmit() xmit_one() dev_queue_xmit_nit() packet_rcv_fanout() ip_check_defrag() ip_defrag() spin_lock() (lock frag queue spinlock) 2) ip6_input_finish() ipv6_frag_rcv() (lock frag queue spinlock) ip6_frag_queue() icmpv6_param_prob() (lock txq->_xmit_lock at some point) We could add lockdep annotations, but we also can make sure IPv6 calls icmpv6_param_prob() only after the release of the frag queue spinlock, since this naturally makes frag queue spinlock a leaf in lock hierarchy. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
ZhangXiaoxu authored
[ Upstream commit 19fad20d ] There is a UBSAN report as below: UBSAN: Undefined behaviour in net/ipv4/tcp_input.c:2877:56 signed integer overflow: 2147483647 * 1000 cannot be represented in type 'int' CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.1.0-rc4-00058-g582549e3 #1 Call Trace: <IRQ> dump_stack+0x8c/0xba ubsan_epilogue+0x11/0x60 handle_overflow+0x12d/0x170 ? ttwu_do_wakeup+0x21/0x320 __ubsan_handle_mul_overflow+0x12/0x20 tcp_ack_update_rtt+0x76c/0x780 tcp_clean_rtx_queue+0x499/0x14d0 tcp_ack+0x69e/0x1240 ? __wake_up_sync_key+0x2c/0x50 ? update_group_capacity+0x50/0x680 tcp_rcv_established+0x4e2/0xe10 tcp_v4_do_rcv+0x22b/0x420 tcp_v4_rcv+0xfe8/0x1190 ip_protocol_deliver_rcu+0x36/0x180 ip_local_deliver+0x15b/0x1a0 ip_rcv+0xac/0xd0 __netif_receive_skb_one_core+0x7f/0xb0 __netif_receive_skb+0x33/0xc0 netif_receive_skb_internal+0x84/0x1c0 napi_gro_receive+0x2a0/0x300 receive_buf+0x3d4/0x2350 ? detach_buf_split+0x159/0x390 virtnet_poll+0x198/0x840 ? reweight_entity+0x243/0x4b0 net_rx_action+0x25c/0x770 __do_softirq+0x19b/0x66d irq_exit+0x1eb/0x230 do_IRQ+0x7a/0x150 common_interrupt+0xf/0xf </IRQ> It can be reproduced by: echo 2147483647 > /proc/sys/net/ipv4/tcp_min_rtt_wlen Fixes: f6722583 ("tcp: track min RTT using windowed min-filter") Signed-off-by:
ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by:
-
Vinod Koul authored
[ Upstream commit b561af36 ] stmmac_check_ether_addr() checks the MAC address and assigns one in driver open(). In many cases when we create slave netdevice, the dev addr is inherited from master but the master dev addr maybe NULL at that time, so move this call to driver probe so that address is always valid. Signed-off-by:
Xiaofei Shen <xiaofeis@codeaurora.org> Tested-by:
Sneh Shah <snehshah@codeaurora.org> Signed-off-by:
Vinod Koul <vkoul@kernel.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Hangbin Liu authored
[ Upstream commit 925b0c84 ] If we add a bond device which is already the master of the team interface, we will hold the team->lock in team_add_slave() first and then request the lock in team_set_mac_address() again. The functions are called like: - team_add_slave() - team_port_add() - team_port_enter() - team_modeop_port_enter() - __set_port_dev_addr() - dev_set_mac_address() - bond_set_mac_address() - dev_set_mac_address() - team_set_mac_address Although team_upper_dev_link() would check the upper devices but it is called too late. Fix it by adding a checking before processing the slave. v2: Do not split the string in netdev_err() Fixes: 3d249d4c ("net: introduce ethernet teaming device") Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Zhu Yanjun authored
[ Upstream commit 4b9fc714 ] Before the commit 490ea596 ("RDS: IB: move FMR code to its own file"), when the dirty_count is greater than 9/10 of max_items of 8K pool, 1M pool is used, Vice versa. After the commit 490ea596 ("RDS: IB: move FMR code to its own file"), the above is removed. When we make the following tests. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M The following will appear. " connecting to 1.1.1.16:4000 negotiated options, tasks will start in 2 seconds Starting up..header from 1.1.1.166:4001 to id 4001 bogus .. tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 ... " So this exchange between 8K and 1M pool is added back. Fixes: commit 490ea596 ("RDS: IB: move FMR code to its own file") Signed-off-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Erez Alfasi authored
[ Upstream commit ace329f4 ] Querying EEPROM high pages data for SFP module is currently not supported by our driver and yet queried, resulting in invalid FW queries. Set the EEPROM ethtool data length to 256 for SFP module will limit the reading for page 0 only and prevent invalid FW queries. Fixes: bb64143e ("net/mlx5e: Add ethtool support for dump module EEPROM") Signed-off-by:
Erez Alfasi <ereza@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
