- 24 Nov, 2022 1 commit
-
-
Damien Le Moal authored
dd_finish_request() tests if the per prio fifo_list is not empty to determine if request dispatching must be restarted for handling blocked write requests to zoned devices with a call to blk_mq_sched_mark_restart_hctx(). While simple, this implementation has 2 problems: 1) Only the priority level of the completed request is considered. However, writes to a zone may be blocked due to other writes to the same zone using a different priority level. While this is unlikely to happen in practice, as writing a zone with different IO priorirites does not make sense, nothing in the code prevents this from happening. 2) The use of list_empty() is dangerous as dd_finish_request() does not take dd->lock and may run concurrently with the insert and dispatch code. Fix these 2 problems by testing the write fifo list of all priority levels using the new helper dd_has_write_work(), and by testing each fifo list using list_empty_careful(). Fixes: c807ab52 ("block/mq-deadline: Add I/O priority support") Cc: <stable@vger.kernel.org> Signed-off-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Reviewed-by:
Johannes Thumshirn <johannes.thumshirn@wdc.com> Link: https://lore.kernel.org/r/20221124021208.242541-2-damien.lemoal@opensource.wdc.comSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
- 23 Nov, 2022 9 commits
-
-
Bart Van Assche authored
Allow the compiler to verify consistency of function declarations and function definitions. This patch fixes the following sparse errors: block/blk-crypto-profile.c:241:14: error: no previous prototype for ‘blk_crypto_get_keyslot’ [-Werror=missing-prototypes] 241 | blk_status_t blk_crypto_get_keyslot(struct blk_crypto_profile *profile, | ^~~~~~~~~~~~~~~~~~~~~~ block/blk-crypto-profile.c:318:6: error: no previous prototype for ‘blk_crypto_put_keyslot’ [-Werror=missing-prototypes] 318 | void blk_crypto_put_keyslot(struct blk_crypto_keyslot *slot) | ^~~~~~~~~~~~~~~~~~~~~~ block/blk-crypto-profile.c:344:6: error: no previous prototype for ‘__blk_crypto_cfg_supported’ [-Werror=missing-prototypes] 344 | bool __blk_crypto_cfg_supported(struct blk_crypto_profile *profile, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ block/blk-crypto-profile.c:373:5: error: no previous prototype for ‘__blk_crypto_evict_key’ [-Werror=missing-prototypes] 373 | int __blk_crypto_evict_key(struct blk_crypto_profile *profile, | ^~~~~~~~~~~~~~~~~~~~~~ Cc: Eric Biggers <ebiggers@google.com> Signed-off-by:Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20221123172923.434339-1-bvanassche@acm.orgSigned-off-by:
-
Jinlong Chen authored
mq is no longer a special case. Signed-off-by:
Jinlong Chen <nickyc975@zju.edu.cn> Reviewed-by:
Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/cbf47824fc726440371e74c867bf635ae1b671a3.1669126766.git.nickyc975@zju.edu.cnSigned-off-by:
-
Jinlong Chen authored
elevator_match does not care about elevator_features any more. Remove related descriptions from its document. Fixes: ffb86425 ("block: don't check for required features in elevator_match") Signed-off-by:
-
Jinlong Chen authored
printk a warning to indicate that the io scheduler has been set to none if switching to a new io scheduler fails. Suggested-by:
-
Jinlong Chen authored
We no longer support falling back to the old io scheduler if switching to the new one fails. Update the document to indicate that. Fixes: a1ce35fa ("block: remove dead elevator code") Signed-off-by:
-
Christoph Böhmwalder authored
DRBD currently has a mix of GPL-2.0 and GPL-2.0-or-later SPDX license identifiers. We have decided to stick with GPL 2.0 only, so consistently use that identifier. Signed-off-by:
Christoph Böhmwalder <christoph.boehmwalder@linbit.com> Link: https://lore.kernel.org/r/20221122134301.69258-5-christoph.boehmwalder@linbit.comSigned-off-by:
-
Joel Colledge authored
Signed-off-by:
Joel Colledge <joel.colledge@linbit.com> Signed-off-by:
-
Christoph Böhmwalder authored
Signed-off-by:
-
Lars Ellenberg authored
Or, depending on the way locking is implemented at the call sites, some updates could be lost (has not been observed). Signed-off-by:
Lars Ellenberg <lars.ellenberg@linbit.com> Signed-off-by:
-
- 22 Nov, 2022 1 commit
-
-
Shin'ichiro Kawasaki authored
The commit ee9d5521 ("blk-mq: simplify blk_mq_realloc_tag_set_tags") cleaned up the function blk_mq_realloc_tag_set_tags. After this change, the function does not update nr_hw_queues of struct blk_mq_tag_set when new nr_hw_queues value is smaller than original. This results in failure of queue number change of block devices. To avoid the failure, add the missing nr_hw_queues update. Fixes: ee9d5521 ("blk-mq: simplify blk_mq_realloc_tag_set_tags") Reported-by:
Chaitanya Kulkarni <chaitanyak@nvidia.com> Signed-off-by:
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/linux-block/20221118140640.featvt3fxktfquwh@shindev/Reviewed-by:
-
- 21 Nov, 2022 3 commits
-
-
Christoph Hellwig authored
blk_crypto_get_keyslot, blk_crypto_put_keyslot, __blk_crypto_evict_key and __blk_crypto_cfg_supported are only used internally by the blk-crypto code, so move the out of blk-crypto-profile.h, which is included by drivers that supply blk-crypto functionality. Signed-off-by:
Eric Biggers <ebiggers@google.com> Link: https://lore.kernel.org/r/20221114042944.1009870-4-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Add a blk_crypto_config_supported_natively helper that wraps __blk_crypto_cfg_supported to retrieve the crypto_profile from the request queue. With this fscrypt can stop including blk-crypto-profile.h and rely on the public consumer interface in blk-crypto.h. Signed-off-by:
-
Christoph Hellwig authored
Switch all public blk-crypto interfaces to use struct block_device arguments to specify the device they operate on instead of th request_queue, which is a block layer implementation detail. Signed-off-by:
-
- 16 Nov, 2022 23 commits
-
-
Waiman Long authored
As noted by Michal, the blkg_iostat_set's in the lockless list hold reference to blkg's to protect against their removal. Those blkg's hold reference to blkcg. When a cgroup is being destroyed, cgroup_rstat_flush() is only called at css_release_work_fn() which is called when the blkcg reference count reaches 0. This circular dependency will prevent blkcg from being freed until some other events cause cgroup_rstat_flush() to be called to flush out the pending blkcg stats. To prevent this delayed blkcg removal, add a new cgroup_rstat_css_flush() function to flush stats for a given css and cpu and call it at the blkgs destruction path, blkcg_destroy_blkgs(), whenever there are still some pending stats to be flushed. This will ensure that blkcg reference count can reach 0 ASAP. Signed-off-by:
Waiman Long <longman@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20221105005902.407297-4-longman@redhat.comSigned-off-by:
-
Waiman Long authored
For a system with many CPUs and block devices, the time to do blkcg_rstat_flush() from cgroup_rstat_flush() can be rather long. It can be especially problematic as interrupt is disabled during the flush. It was reported that it might take seconds to complete in some extreme cases leading to hard lockup messages. As it is likely that not all the percpu blkg_iostat_set's has been updated since the last flush, those stale blkg_iostat_set's don't need to be flushed in this case. This patch optimizes blkcg_rstat_flush() by keeping a lockless list of recently updated blkg_iostat_set's in a newly added percpu blkcg->lhead pointer. The blkg_iostat_set is added to a lockless list on the update side in blk_cgroup_bio_start(). It is removed from the lockless list when flushed in blkcg_rstat_flush(). Due to racing, it is possible that blk_iostat_set's in the lockless list may have no new IO stats to be flushed, but that is OK. To protect against destruction of blkg, a percpu reference is gotten when putting into the lockless list and put back when removed. When booting up an instrumented test kernel with this patch on a 2-socket 96-thread system with cgroup v2, out of the 2051 calls to cgroup_rstat_flush() after bootup, 1788 of the calls were exited immediately because of empty lockless list. After an all-cpu kernel build, the ratio became 6295424/6340513. That was more than 99%. Signed-off-by:
-
Waiman Long authored
For blkcg_css_alloc(), the only error that will be returned is -ENOMEM. Simplify error handling code by returning this error directly instead of setting an intermediate "ret" variable. Signed-off-by:
Ming Lei <ming.lei@redhat.com> Acked-by:
-
Yu Kuai authored
After creating a dm device, then user can reload such dm with itself, and dead loop will be triggered because dm keep looking up to itself. Test procedures: 1) dmsetup create test --table "xxx sda", assume dm-0 is created 2) dmsetup suspend test 3) dmsetup reload test --table "xxx dm-0" 4) dmsetup resume test Test result: BUG: TASK stack guard page was hit at 00000000736a261f (stack is 000000008d12c88d..00000000c8dd82d5) stack guard page: 0000 [#1] PREEMPT SMP CPU: 29 PID: 946 Comm: systemd-udevd Not tainted 6.1.0-rc3-next-20221101-00006-g17640ca3b0ee #1295 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 RIP: 0010:dm_prepare_ioctl+0xf/0x1e0 Code: da 48 83 05 4a 7c 99 0b 01 41 89 c4 eb cd e8 b8 1f 40 00 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 48 83 05 a1 5a 99 0b 01 <41> 56 49 89 d6 41 55 4c 8d af 90 02 00 00 9 RSP: 0018:ffffc90002090000 EFLAGS: 00010206 RAX: ffff8881049d6800 RBX: ffff88817e589000 RCX: 0000000000000000 RDX: ffffc90002090010 RSI: ffffc9000209001c RDI: ffff88817e589000 RBP: 00000000484a101d R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000005331 R13: 0000000000005331 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fddf9609200(0000) GS:ffff889fbfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000208fff8 CR3: 0000000179043000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dm_blk_ioctl+0x50/0x1c0 ? dm_prepare_ioctl+0xe0/0x1e0 dm_blk_ioctl+0x88/0x1c0 dm_blk_ioctl+0x88/0x1c0 ......(a lot of same lines) dm_blk_ioctl+0x88/0x1c0 dm_blk_ioctl+0x88/0x1c0 blkdev_ioctl+0x184/0x3e0 __x64_sys_ioctl+0xa3/0x110 do_syscall_64+0x35/0x80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fddf7306577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d e1 88 8 RSP: 002b:00007ffd0b2ec318 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00005634ef478320 RCX: 00007fddf7306577 RDX: 0000000000000000 RSI: 0000000000005331 RDI: 0000000000000007 RBP: 0000000000000007 R08: 00005634ef4843e0 R09: 0000000000000080 R10: 00007fddf75cfb38 R11: 0000000000000246 R12: 00000000030d4000 R13: 0000000000000000 R14: 0000000000000000 R15: 00005634ef48b800 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:dm_prepare_ioctl+0xf/0x1e0 Code: da 48 83 05 4a 7c 99 0b 01 41 89 c4 eb cd e8 b8 1f 40 00 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 57 48 83 05 a1 5a 99 0b 01 <41> 56 49 89 d6 41 55 4c 8d af 90 02 00 00 9 RSP: 0018:ffffc90002090000 EFLAGS: 00010206 RAX: ffff8881049d6800 RBX: ffff88817e589000 RCX: 0000000000000000 RDX: ffffc90002090010 RSI: ffffc9000209001c RDI: ffff88817e589000 RBP: 00000000484a101d R08: 0000000000000000 R09: 0000000000000007 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000005331 R13: 0000000000005331 R14: 0000000000000000 R15: 0000000000000000 FS: 00007fddf9609200(0000) GS:ffff889fbfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000208fff8 CR3: 0000000179043000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Kernel panic - not syncing: Fatal exception in interrupt Kernel Offset: disabled ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Fix the problem by forbidding a disk to create link to itself. Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
-
Yu Kuai authored
We hold a reference to the holder kobject for each bd_holder_disk, so to make the code a bit more robust, use a reference to it instead of the block_device. As long as no one clears ->bd_holder_dir in before freeing the disk, this isn't strictly required, but it does make the code more clear and more robust. Orignally-From: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Yu Kuai authored
Currently, the caller of bd_link_disk_holer() get 'bdev' by blkdev_get_by_dev(), which will look up 'bdev' by inode number 'dev'. Howerver, it's possible that del_gendisk() can be called currently, and 'bd_holder_dir' can be freed before bd_link_disk_holer() access it, thus use after free is triggered. t1: t2: bdev = blkdev_get_by_dev del_gendisk kobject_put(bd_holder_dir) kobject_free() bd_link_disk_holder Fix the problem by checking disk is still live and grabbing a reference to 'bd_holder_dir' first in bd_link_disk_holder(). Signed-off-by:
-
Christoph Hellwig authored
Now that dm has been fixed to track of holder registrations before add_disk, the somewhat buggy block layer code can be safely removed. Signed-off-by:
-
Christoph Hellwig authored
dm is a bit special in that it opens the underlying devices. Commit 89f871af ("dm: delay registering the gendisk") tried to accommodate that by allowing to add the holder to the list before add_gendisk and then just add them to sysfs once add_disk is called. But that leads to really odd lifetime problems and error handling problems as we can't know the state of the kobjects and don't unwind properly. To fix this switch to just registering all existing table_devices with the holder code right after add_disk, and remove them before calling del_gendisk. Fixes: 89f871af ("dm: delay registering the gendisk") Reported-by:
Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20221115141054.1051801-7-yukuai1@huaweicloud.comSigned-off-by:
-
Yu Kuai authored
open_table_device() and close_table_device() is protected by table_devices_lock, hence use it to protect add_disk() and del_gendisk(). Prepare to track per-add_disk holder relations in dm. Signed-off-by:
-
Christoph Hellwig authored
Take the list unlink and free into close_table_device so that no half torn down table_devices exist. Also remove the check for a NULL bdev as that can't happen - open_table_device never adds a table_device to the list that does not have a valid block_device. Signed-off-by:
-
Christoph Hellwig authored
Move all the logic for allocation the table_device and linking it into the list into the open_table_device. This keeps the code tidy and ensures that the table_devices only exist in fully initialized state. Signed-off-by:
-
Christoph Hellwig authored
free_table_devices just warns and frees all table_device structures when the target removal did not remove them. This should never happen, but if it did, just freeing the structure without deleting them from the list or cleaning up the resources would not help at all. So just WARN on a non-empty list instead. Signed-off-by:
-
Christoph Hellwig authored
Zero out the pointer to ->slave_dir so that the holder code doesn't incorrectly treat the object as alive when add_disk failed or after del_gendisk was called. Fixes: 89f871af ("dm: delay registering the gendisk") Reported-by:
-
Gabriel Krisman Bertazi authored
Jan reported the new algorithm as merged might be problematic if the queue being awaken becomes empty between the waitqueue_active inside sbq_wake_ptr check and the wake up. If that happens, wake_up_nr will not wake up any waiter and we loose too many wake ups. In order to guarantee progress, we need to wake up at least one waiter here, if there are any. This now requires trying to wake up from every queue. Instead of walking through all the queues with sbq_wake_ptr, this call moves the wake up inside that function. In a previous version of the patch, I found that updating wake_index several times when walking through queues had a measurable overhead. This ensures we only update it once, at the end. Fixes: 4f8126bb ("sbitmap: Use single per-bitmap counting to wake up queued tags") Reported-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Gabriel Krisman Bertazi <krisman@suse.de> Reviewed-by:
-
Gabriel Krisman Bertazi authored
Sbitmap code will need to know how many waiters were actually woken for its batched wakeups implementation. Return the number of woken exclusive waiters from __wake_up() to facilitate that. Suggested-by:
-
Gabriel Krisman Bertazi authored
When a queue is awaken, the wake_index written by sbq_wake_ptr currently keeps pointing to the same queue. On the next wake up, it will thus retry the same queue, which is unfair to other queues, and can lead to starvation. This patch, moves the index update to happen before the queue is returned, such that it will now try a different queue first on the next wake up, improving fairness. Fixes: 4f8126bb ("sbitmap: Use single per-bitmap counting to wake up queued tags") Reported-by:
-
Christoph Hellwig authored
While the block device code should switch to implementing ->writepages instead of ->writepage eventually, the current implementation is entirely pointless as it does the same looping over ->writepage as the generic code if no ->writepages is present. Remove blkdev_writepages so that we can eventually unexport generic_writepages. Signed-off-by:
-
Pavel Begunkov authored
Now we can use IOCB_ALLOC_CACHE not only for iopoll'ed reads/write but also for normal IRQ driven I/O. Signed-off-by:
Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/fb8bd092ed5a4a3b037e84e4777074d07aa5639a.1667384020.git.asml.silence@gmail.comSigned-off-by:
-
Pavel Begunkov authored
The downside of the bio pcpu cache is that bios of a cpu will be never freed unless there is new I/O issued from that cpu. We currently keep max 512 bios, which feels too much, half it. Signed-off-by:
-
Pavel Begunkov authored
This patch extends REQ_ALLOC_CACHE to IRQ completions, whenever currently it's only limited to iopoll. Instead of guarding the list with irq toggling on alloc, which is expensive, it keeps an additional irq-safe list from which bios are spliced in batches to ammortise overhead. On the put side it toggles irqs, but in many cases they're already disabled and so cheap. Signed-off-by:
-
Pavel Begunkov authored
Extract a helper out of bio_put for recycling into percpu caches. It's a preparation patch without functional changes. Signed-off-by:
-
Pavel Begunkov authored
Biosets keep a mempool, so as long as requests complete we can always can allocate and have forward progress. Percpu bio caches break that assumptions as we may complete into the cache of one CPU and after try and fail to allocate with another CPU. We also can't grab from another CPU's cache without tricky sync. If we're allocating with a bio while the mempool is undersaturated, remove REQ_ALLOC_CACHE flag, so on put it will go straight to mempool. It might try to free into mempool more requests than required, but assuming than there is no memory starvation in the system it'll stabilise and never hit that path. Signed-off-by:
-
Pavel Begunkov authored
Introduce a helper mempool_is_saturated(), which tells if the mempool is under-filled or not. We need it to figure out whether it should be freed right into the mempool or could be cached with top level caches. Signed-off-by:
-
- 14 Nov, 2022 3 commits
-
-
Jens Axboe authored
Merge branch 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md into for-6.2/block Pull MD fixes from Song. * 'md-next' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md/raid1: stop mdx_raid1 thread when raid1 array run failed md/raid5: use bdev_write_cache instead of open coding it md: fix a crash in mempool_free md/raid0, raid10: Don't set discard sectors for request queue md/bitmap: Fix bitmap chunk size overflow issues md: introduce md_ro_state md: factor out __md_set_array_info() lib/raid6: drop RAID6_USE_EMPTY_ZERO_PAGE raid5-cache: use try_cmpxchg in r5l_wake_reclaim drivers/md/md-bitmap: check the return value of md_bitmap_get_counter()
-
Jiang Li authored
fail run raid1 array when we assemble array with the inactive disk only, but the mdx_raid1 thread were not stop, Even if the associated resources have been released. it will caused a NULL dereference when we do poweroff. This causes the following Oops: [ 287.587787] BUG: kernel NULL pointer dereference, address: 0000000000000070 [ 287.594762] #PF: supervisor read access in kernel mode [ 287.599912] #PF: error_code(0x0000) - not-present page [ 287.605061] PGD 0 P4D 0 [ 287.607612] Oops: 0000 [#1] SMP NOPTI [ 287.611287] CPU: 3 PID: 5265 Comm: md0_raid1 Tainted: G U 5.10.146 #0 [ 287.619029] Hardware name: xxxxxxx/To be filled by O.E.M, BIOS 5.19 06/16/2022 [ 287.626775] RIP: 0010:md_check_recovery+0x57/0x500 [md_mod] [ 287.632357] Code: fe 01 00 00 48 83 bb 10 03 00 00 00 74 08 48 89 ...... [ 287.651118] RSP: 0018:ffffc90000433d78 EFLAGS: 00010202 [ 287.656347] RAX: 0000000000000000 RBX: ffff888105986800 RCX: 0000000000000000 [ 287.663491] RDX: ffffc90000433bb0 RSI: 00000000ffffefff RDI: ffff888105986800 [ 287.670634] RBP: ffffc90000433da0 R08: 0000000000000000 R09: c0000000ffffefff [ 287.677771] R10: 0000000000000001 R11: ffffc90000433ba8 R12: ffff888105986800 [ 287.684907] R13: 0000000000000000 R14: fffffffffffffe00 R15: ffff888100b6b500 [ 287.692052] FS: 0000000000000000(0000) GS:ffff888277f80000(0000) knlGS:0000000000000000 [ 287.700149] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 287.705897] CR2: 0000000000000070 CR3: 000000000320a000 CR4: 0000000000350ee0 [ 287.713033] Call Trace: [ 287.715498] raid1d+0x6c/0xbbb [raid1] [ 287.719256] ? __schedule+0x1ff/0x760 [ 287.722930] ? schedule+0x3b/0xb0 [ 287.726260] ? schedule_timeout+0x1ed/0x290 [ 287.730456] ? __switch_to+0x11f/0x400 [ 287.734219] md_thread+0xe9/0x140 [md_mod] [ 287.738328] ? md_thread+0xe9/0x140 [md_mod] [ 287.742601] ? wait_woken+0x80/0x80 [ 287.746097] ? md_register_thread+0xe0/0xe0 [md_mod] [ 287.751064] kthread+0x11a/0x140 [ 287.754300] ? kthread_park+0x90/0x90 [ 287.757974] ret_from_fork+0x1f/0x30 In fact, when raid1 array run fail, we need to do md_unregister_thread() before raid1_free(). Signed-off-by:Jiang Li <jiang.li@ugreen.com> Signed-off-by:
Song Liu <song@kernel.org>
-
Christoph Hellwig authored
Use the bdev_write_cache instead of two equivalent open coded checks. Signed-off-by:
-
