SRES is self-cleared bit, but REG_MICFIL_CTRL1 is defined as
non volatile register, it still remain in regmap cache after set,
then every update of REG_MICFIL_CTRL1, software reset happens.
to avoid this, clear it explicitly.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1651925654-32060-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

It is possible to craft a topology where sof_get_control_data() would do
out of bounds access because it expects that it is only called when the
payload is bytes type.
Confusingly it also handles other types of controls, but the payload
parsing implementation is only valid for bytes.

Fix the code to count the non bytes controls and instead of storing a
pointer to sof_abi_hdr in sof_widget_data (which is only valid for bytes),
store the pointer to the data itself and add a new member to save the size
of the data.

In case of non bytes controls we store the pointer to the chanv itself,
which is just an array of values at the end.

In case of bytes control, drop the wrong cdata->data (wdata[i].pdata) check
against NULL since it is incorrect and invalid in this context.
The data is pointing to the end of cdata struct, so it should never be
null.
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Tested-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Link: https://lore.kernel.org/r/20220427185221.28928-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The driver has a custom put function for "DSP Voice Wake Up" which does
not generate event notifications on change, instead returning 0. Since we
already exit early in the case that there is no change this can be fixed
by unconditionally returning 1 at the end of the function.
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220428162444.3883147-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

DAPM tracks and reports the value presented to the user from DAPM controls
separately to the register value, these may diverge during initialisation
or when an autodisable control is in use.

When writing DAPM controls we currently report that a change has occurred
if either the DAPM value or the value stored in the register has changed,
meaning that if the two are out of sync we may appear to report a spurious
event to userspace. Since we use this folded in value for nothing other
than the value reported to userspace simply drop the folding in of the
register change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428161833.3690050-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The previous fix for event generation for custom controls compared the
value already in the register with the value being written, missing the
logic that only applies the value to the register when the control is
already enabled. Fix this, compare the value cached in the driver data
rather than the register.

This should really be an autodisable control rather than open coded.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220428113221.15326-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

If preparing/enabling the pclk fails, the probe function should
unprepare and disable the previously prepared and enabled mclk,
which it doesn't do. This commit rectifies this.

Fixes: c3275903 ("ASoC: rockchip: support ACODEC for rk3328")
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Reviewed-by: Katsuhiro Suzuki <katsuhiro@katsuster.net>
Link: https://lore.kernel.org/r/20220427172310.138638-1-frattaroli.nicolas@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

HID made of either Wolfson/CirrusLogic PCI ID + 8960 identifier

This helps enumerate the Waveshare WM8960 WM8960 Hi-Fi Sound
Card HAT on the Up2 platform.

The scripts at https://github.com/thesofproject/acpi-scripts
can be used to add the ACPI initrd overlay.

This commit is similar to the commit:
960cdd50 ("ASoC: wm8804: Add ACPI support")
Signed-off-by: Nicola Lunghi <nick83ola@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220427212916.40145-1-nick83ola@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

We are accessing "desc->ops" in sof_pci_probe without checking "desc"
pointer. This results in NULL pointer exception if pci_id->driver_data
i.e desc pointer isn't defined in sof device probe:

BUG: kernel NULL pointer dereference, address: 0000000000000060
PGD 0 P4D 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:sof_pci_probe+0x1e/0x17f [snd_sof_pci]
Code: Unable to access opcode bytes at RIP 0xffffffffc043dff4.
RSP: 0018:ffffac4b03b9b8d8 EFLAGS: 00010246

Add NULL pointer check for sof_dev_desc pointer to avoid such exception.
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Ajit Kumar Pandey <AjitKumar.Pandey@amd.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220426183357.102155-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

As pointed out by Sascha Hauer, this patch changes:
if (pmc->config && !pcm->config->prepare_slave_config)
        <do nothing>
to:
if (pmc->config && !pcm->config->prepare_slave_config)
        snd_dmaengine_pcm_prepare_slave_config()

This breaks the drivers that do not need a call to
dmaengine_slave_config(). Drivers that still need to call
snd_dmaengine_pcm_prepare_slave_config(), but have a NULL
pcm->config->prepare_slave_config should use
snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config
callback.

Fixes: 9a1e1344 ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-1-codrin.ciubotariu@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

Since a pointer to struct snd_dmaengine_pcm_config is passed,
snd_dmaengine_pcm_prepare_slave_config() is no longer called unless it's
explicitly set in prepare_slave_config.

Fixes: 50291652 ("ASoC: atmel: mchp-pdmc: add PDMC driver")
Suggested-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Link: https://lore.kernel.org/r/20220421125403.2180824-2-codrin.ciubotariu@microchip.comSigned-off-by: Mark Brown <broonie@kernel.org>

The max98090 driver has some custom controls which share a put() function
which returns 0 unconditionally, meaning that events are not generated
when the value changes. Fix that.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The max98090 driver has a custom put function for some controls which can
only be updated in certain circumstances which makes no effort to validate
that input is suitable for the control, allowing out of spec values to be
written to the hardware and presented to userspace. Fix this by returning
an error when invalid values are written.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Correct the reg 0x09 size to one byte.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/1650608810-3829-1-git-send-email-u0084500@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

This commit e138233e causes the
following system crash when using audio on G12A/G12B & SM1 systems:

 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282
  in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0
 preempt_count: 10001, expected: 0
 RCU nest depth: 0, expected: 0
 Preemption disabled at:
 schedule_preempt_disabled+0x20/0x2c

 mutex_lock+0x24/0x60
 _snd_pcm_stream_lock_irqsave+0x20/0x3c
 snd_pcm_period_elapsed+0x24/0xa4
 axg_fifo_pcm_irq_block+0x64/0xdc
 __handle_irq_event_percpu+0x104/0x264
 handle_irq_event+0x48/0xb4
 ...
 start_kernel+0x3f0/0x484
 __primary_switched+0xc0/0xc8

Revert this commit until the crash is fixed.

Fixes: e138233e ("ASoC: meson: axg-card: make links nonatomic")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421155725.2589089-2-narmstrong@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

This reverts commit bf5e4887 because
the following and required commit e138233e
causes the following system crash when using audio:
 BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282

Fixes: bf5e4887 ("ASoC: meson: axg-tdm-interface: manage formatters in trigger")
Reported-by: Dmitry Shmidt <dimitrysh@google.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421155725.2589089-1-narmstrong@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>

cppcheck throws the following warning:

sound/soc/soc-ops.c:461:8: style: Variable 'ret' is assigned a value
that is never used. [unreadVariable]
   ret = err;
       ^

This seems to be a missing change in the return value.

Fixes: 7f3d90a3 ("ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx()")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20220421162328.302017-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

The G12A tohdmi has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-4-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

The AIU CODEC has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-3-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

The AIU ACODEC has a custom put() operation which returns 0 when the value
of the mux changes, meaning that events are not generated for userspace.
Change to return 1 in this case, the function returns early in the case
where there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20220421123803.292063-2-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org

The tone generator frequency control just returns 0 on successful write,
not a boolean value indicating if there was a change or not.  Compare
what was written with the value that was there previously so that
notifications are generated appropriately when the value changes.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220420133437.569229-1-broonie@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

In asoc_simple_shutdown() the snd_soc_dai_set_sysclk() function
is called twice with input direction SND_SOC_CLOCK_IN.
Restore one call with output direction SND_SOC_CLOCK_OUT.

Fixes: 5ca2ab45 ("ASoC: simple-card-utils: Add new system-clock-fixed flag")
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://lore.kernel.org/r/20220412111658.11015-1-olivier.moysan@foss.st.comSigned-off-by: Mark Brown <broonie@kernel.org>

The WM8958 DSP controls all return 0 on successful write, not a boolean
value indicating if the write changed the value of the control. Fix this
by returning 1 after a change, there is already a check at the start of
each put() that skips the function in the case that there is no change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20220416125408.197440-1-broonie@kernel.org
Cc: stable@vger.kernel.org

For wmfw format v2 and later the coefficient name strings have a length
field and are NOT null-terminated. Use kasprintf() to convert the
unterminated string into a null-terminated string in an allocated buffer.

The previous code handled this duplication incorrectly using kmemdup()
and getting the length from a strlen() of the (unterminated) source string.
This resulted in creating a string that continued up to the next byte in
the firmware file that just happened to be 0x00.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://lore.kernel.org/r/20220412163927.1303470-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

After a successful lpass_macro_pds_init() call, lpass_macro_pds_exit() must
be called.

Add the missing call in the error handling path of the probe function and
use it.

Fixes: 9e3d83c5 ("ASoC: codecs: Add power domains support in digital macro codecs")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/5b5a015a9b1dc8011c6a4053fa49da1f2531e47c.1648969065.git.christophe.jaillet@wanadoo.frSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Mauro Carvalho Chehab <mchehab@kernel.org>:

Huawei Matebook D15 uses two different GPIOs are used to control the output:

	- gpio0 controls the speaker output;
	- gpio1 controls the headphone output.

Changing both at the same time cause spurious events that are mis-interpreted
as input events, causing troubles on apps. So, a delay is needed before turning
on such gpios.

Also, the headset microphone is connected to MIC1, instead of MIC2 port.

With this patch, plugging a headphone causes a jack event to trigger the speaker
supply, powering down the speaker and powering up the headphone output.
Removing the headphone also triggers the power supply, powering up the speaker
and powering down the headphone.

The headset microphone also works.

Based on experimental tests, Huawei Matebook D15 actually uses
both gpio0 and gpio1: the first one controls the speaker, while
the other one controls the headphone.

Also, the headset is mapped as MIC1, instead of MIC2.

So, add a quirk for it.
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/d678aef9fc9a07aced611aa7cb8c9b800c649e5a.1649357263.git.mchehab@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

The headset/internal mic can either be routed as mic1/mic2
or vice-versa.

By default, the driver assumes that the headset is mapped as
mic2, but not all devices map this way.

So, add a quirk to support changing it to mic1, using mic2
for the internal analog mic (if any).
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/5d88fc29b79be7ab77dae391c8e5ee929fd36c27.1649357263.git.mchehab@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Some devices may use both gpio0 and gpio1 to independently switch
the speaker and the headphone.

Add support for that.
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/535454c0c598a8454487fe29b164527370e2db81.1649357263.git.mchehab@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

In preparation for the support of an additional gpio for headphone
control, rename GPIOs to make explicit references to speakers and
gpio0 or gpio1.

No functionality change.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/3008c576ca45d5cc99ad4a18d1d30de45a0aff80.1649357263.git.mchehab@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

When the driver fails during probing, the driver should disable the
regulator, not just handle it in wm8731_hw_init().

The following log reveals it:

[   17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0
[   17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0
[   17.824467] Call Trace:
[   17.824774]  <TASK>
[   17.825040]  regulator_bulk_free+0x82/0xe0
[   17.825514]  devres_release_group+0x319/0x3d0
[   17.825882]  i2c_device_probe+0x766/0x940
[   17.829198]  i2c_register_driver+0xb5/0x130
Signed-off-by: Zheyu Ma <zheyuma97@gmail.com>
Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

The left speaker of max98373 uses spk_r_endpoint, and right
speaker uses spk_l_endpoint, this is obviously wrong.

This patch corrects the endpoints for max98373 codec.
Signed-off-by: Chao Song <chao.song@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192341.271465-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

SIDO(Single-Inductor Dual-Ouput) Buck powers up both analog and digital
circuits along with internal memory, powering off this is the last thing
that codec should do when going to very low power.

Current code was powering off this Buck if there are no users of sysclk,
which is not correct. Powering off this buck will result in no register access.
This code path was never tested until recently after adding pm support
in SoundWire controller. Fix this by removing the buck poweroff when the
codec is active and also the code that is not used.

Without this patch all the read/write transactions will never complete and
results in SLIMBus Errors like:

qcom,slim-ngd qcom,slim-ngd.1: Tx:MT:0x0, MC:0x60, LA:0xcf failed:-110
wcd934x-codec wcd934x-codec.1.auto: ASoC: error at soc_component_read_no_lock
	on wcd934x-codec.1.auto for register: [0x00000d05] -110
qcom,slim-ngd-ctrl 171c0000.slim: Error Interrupt received 0x82000000
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Link: https://lore.kernel.org/r/20220407094313.2880-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>

scontrol doesn't get freed when kstrdup returns NULL.
Fix by free iscontrol in that case.

     scontrol = kzalloc(sizeof(*scontrol), GFP_KERNEL);
     if (!scontrol)
         return -ENOMEM;

     scontrol->name = kstrdup(hdr->name, GFP_KERNEL);
     if (!scontrol->name)
         return -ENOMEM;
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220318021616.2599630-1-liaoyu15@huawei.comSigned-off-by: Mark Brown <broonie@kernel.org>

We set the cpu_dai capture_ or playback_widget on widget_ready but
never clear them, which leads to failures when unloading/reloading a
topology in modprobe/rmmod tests

BugLink: https://github.com/thesofproject/linux/issues/3535
Fixes: 311ce4fe ("ASoC: SOF: Add support for loading topologies")
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406191606.254576-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch takes a defensive programming and paranoid approach in case
the parent device (SoundWire) is pm_runtime resumed but the rt711
device is not. In that case, during the attachment and initialization,
a jack detection workqueue can be scheduled. Since the pm_runtime
suspend routines will not be invoked, the sequence to cancel all
deferred work is not executed, and the jack detection could happen
after the bus stops operating, leading to a timeout.

This patch applies the same solution to rt5682, based on the
similarities between codec drivers. The race condition with rt5682 was
not detected experimentally though.

BugLink: https://github.com/thesofproject/linux/issues/3459Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20220406192005.262996-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Follow Intel's design to replace max98360a amp SSP2 reather than SSP1
by judging DMI_OEM_STRING in sof_rt5682_quirk_table struct.
And reusing max98357's topology since DAI setting could be leveraged.
Signed-off-by: Ajye Huang <ajye_huang@compal.corp-partner.google.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20220324084708.2009375-1-ajye_huang@compal.corp-partner.google.comSigned-off-by: Mark Brown <broonie@kernel.org>

Refactoring in commit a50b7926 ("ASoC: fsl_sai: implement 1:1
bclk:mclk ratio support") led to the bypass never happening
as (ratio = 1) was caught in the existing if (ratio & 1) continue;
check. The correct check sequence instead is:

 - skip all ratios lower than one and higher than 512
 - skip all odd ratios except for 1:1
 - skip 1:1 ratio if and only if !support_1_1_ratio

And for all others, calculate the appropriate divider. Adjust the
code to facilitate this.

Fixes: a50b7926 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support")
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://lore.kernel.org/r/20220405155731.745413-1-a.fatoum@pengutronix.deSigned-off-by: Mark Brown <broonie@kernel.org>

Don't dereference simple_dai before it has been checked for NULL.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 1e974e5b ("ASoC: audio_graph_card2: Add support for variable slot widths")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20220404113252.1152659-1-rf@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Heiner Kallweit <hkallweit1@gmail.com>:

On a S905W-based system I get the following error:
debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present!

Turned out that multiple components having the same name triggers this
error in soc_init_component_debugfs(). The proposed solution allows
other drivers to adopt the same approach with minimal effort.
With the patch the error is gone and that's the debugfs entries.

/sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller
/sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller