Merge tag 'imx-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc

Pull "i.MX defconfig updates for 4.15" from Shawn Guo:
 - Turn on DRM_DW_HDMI_CEC option to get HDMI CEC support.
 - Enable MUX_MMIO to get ADV7180 probe on Gateworks GW51xx boards.

* tag 'imx-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v6_v7_defconfig: Select the CEC driver
  ARM: imx_v6_v7_defconfig: Select CONFIG_MUX_MMIO

Pull "mvebu arm64 for 4.15 (part 1)" from Gregory CLEMENT:

For Armada 7K/8K, enable NAND, RTC, comphy and 10G PHY in the
defconfig

* tag 'mvebu-arm64-4.15-1' of git://git.infradead.org/linux-mvebu:
  arm64: defconfig: enable RTC on Armada 7K/8K SoCs
  arm64: defconfig: enable NAND on Armada 7K/8K SoCs
  arm64: defconfig: enable Marvell CP110 comphy
  arm64: defconfig: enable the Marvell 10G PHY as a module

Merge tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/soc

Pull "arm64: tegra: Default configuration updates for v4.15-rc1" from Thierry Reding:

This enables the PCI host controller on 64-bit ARM. It is supported and
enabled via device tree on Tegra210 and Tegra186.

* tag 'tegra-for-4.15-arm64-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: defconfig: Enable Tegra PCI controller

Merge tag 'sunxi-core-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/soc

Pull "Allwinner core changes for 4.15" from Maxime Ripard:

A bunch of patches for the sunxi documentation and mach-sunxi. The most
notable feature is the introduction of the R40 support.

* tag 'sunxi-core-for-4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: sunxi: add support for R40 SoC
  ARM: sunxi: fix the core number of V3s in sunxi README
  dt-bindings: add compatible string for Allwinner V3s SoC

Merge tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "more soc changes for omaps for v4.15 merge window" from Tony Lindgren:

Drop omap legacy platform data for IRQ, DMA and IO resources. With the
dts files fixed up to contain the necessary data for basic resources, we
can drop the related platform data.

Note that this branch depends on the "omap-for-v4.15/fixes-dt-signed"
branch and the patches with dependencies are based on a merge with that
branch.

These patches first ensure things keep working for the legacy "ti,hwmods"
property when we start making it optional, then adds a minimal TI sysc
interconnect target device driver to handle the new generic "ti,sysc"
compatible property. And then we can finally drop the legacy platform
data for IRQ, DMA and IO resources as seen in the diffstats.

* tag 'omap-for-v4.15/ti-sysc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (25 commits)
  bus: ti-sysc: Fix unbalanced pm_runtime_enable by adding remove
  bus: ti-sysc: mark PM functions as __maybe_unused
  ARM: OMAP2+: omap_device: fix error return code in omap_device_copy_resources()
  ARM: OMAP2+: Drop legacy struct omap_hwmod_addr_space
  ARM: OMAP2+: Drop omap_hwmod_dma_info
  ARM: OMAP2+: Drop omap_hwmod_irq_info
  ARM: OMAP4: Remove legacy IRQ for PRM
  ARM: OMAP3: Remove legacy IRQ for PRM
  bus: ti-sysc: Add minimal TI sysc interconnect target driver
  ARM: OMAP2+: Populate legacy resources for dma and smartreflex
  ARM: OMAP2+: Parse module IO range from dts for legacy "ti,hwmods" support
  ARM: dts: Configure SmartReflex only to idle the interconnect target module
  ARM: dts: Add nodes for missing omap4 interconnect target modules
  dt-bindings: bus: Minimal TI sysc interconnect target module binding
  ARM: dts: Add missing hwmod related properties for dra7
  ARM: dts: Add missing hwmod related nodes for am33xx
  ARM: dts: Add missing dma hwmod property for omap5
  ARM: dts: Add missing wdt3 node for omap4
  ARM: dts: Add missing hsi node for omap4
  ARM: dts: Add missing onewire node for omap4
  ...

Merge tag 'stm32-defconfig-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc

Pull "STM32 defconfig updates for v4.15, round 1" from Alexandre Torgue:

Highlights:
----------
 -Regenerate default configuration
 -Add DMAMUX support
 -Add I2C F7 support
 -Add MDMA support

* tag 'stm32-defconfig-for-v4.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: configs: stm32: Add MDMA support in STM32 defconfig
  ARM: configs: stm32: Add I2C F7 support in STM32 defconfig
  ARM: configs: stm32: Add DMAMUX support in STM32 defconfig
  ARM: configs: stm32: Update default configuration for v4.14-rc1

The SX150X GPIO expander has been moved to pin control and
its Kconfig symbol has been renamed. We used to have a paper-over
thing in Kconfig but it was causing circular dependencies so
I have had to kill it off. Select the right driver instead.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'qcom-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM Based defconfig Updates for v4.15" from Andy Gross:

* Enable Sony Z2 tablet options
* Enable USB on APQ8064/MSM8974
* Fixup/catchup config to support newer options

* tag 'qcom-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  ARM: qcom_defconfig: Enable Z2 Tablet related options
  ARM: qcom_defconfig: Disable DEBUG_GPIO
  ARM: qcom_defconfig: Enable configs for USB on apq8064/msm8974
  ARM: qcom_defconfig: Resync with new Kconfig options

Merge tag 'qcom-arm64-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/soc

Pull "Qualcomm ARM64 Based defconfig Updates for v4.15" from Andy Gross:

* Enable QCOM IOMMU
* Enable Qualcomm USB options

* tag 'qcom-arm64-defconfig-for-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
  arm64: defconfig: re-enable Qualcomm DB410c USB
  arm64: defconfig: Enable QCOM_IOMMU

Pull "arm: Xilinx Zynq patches for v4.15" from Michal Simek:

- Remove Soren from reviewer list

* tag 'zynq-soc-for-4.15' of https://github.com/Xilinx/linux-xlnx:
  MAINTAINERS: Remove myself as reviewer

Merge tag 'samsung-soc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung mach/soc changes for v4.15" from Krzysztof Kozłowski:

1. Cleanups for s3c24xx and s3c64xx (memory allocation printks, code
   style).
2. Remove of Exynos4212 related dead code (no more support for this
   SoC).

* tag 'samsung-soc-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: EXYNOS: Remove Exynos4212 related dead code
  ARM: SAMSUNG: Simplify size used for kzalloc
  ARM: SAMSUNG: Remove printk for failed memory allocation
  ARM: s3c64xx: Delete an unnecessary return statement in samsung_bl_set
  ARM: s3c64xx: Remove printk for failed memory allocation in samsung_bl_set
  ARM: s3c2410: Fix typos in a comments
  ARM: s3c24xx: Simplify size used for kzalloc in iotiming get
  ARM: s3c24xx: Remove printk for failed memory allocation in iotiming get

Merge tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc

Pull "Samsung defconfig changes for v4.15" from Krzysztof Kozłowski:

1. Enable USB3503 on multi_v7 for Odroid U3.
2. Enable USB Attached SCSI for Odroid HC1.

* tag 'samsung-defconfig-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Enable UAS support for Odroid HC1 board
  ARM: exynos_defconfig: Enable UAS support for Odroid HC1 board
  ARM: multi_v7_defconfig: Enable USB3503 driver

Merge tag 'omap-for-v4.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

Pull "OMAP soc changes for omaps for v4.15 merge window" from Tony Lindgren:

SoC changes for omaps for v4.15 merge window that are mostly non-urgent
fixes and clean-up in preparation for dropping more platform data later
on:

- Fix am33xx/am437x MMC address space offsets

- Fix overwriting clkctrl and modulemode values when dts data is
  used

- Drop unused platform init code for omap_init_hdq

- Drop unused struct omap_hwmod_mux_info

- Remove duplicate define for dra722 es1.0 silicon revision

- Add support for dra71x es2.1

- Make omap_dma_dev_info __initdata

- A series of fixes for Coccinelle found issues

* tag 'omap-for-v4.15/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP: Fix typos in two comment lines in _omap_dm_timer_request()
  ARM: OMAP: Use kcalloc() in omap_system_dma_probe()
  ARM: OMAP: Improve a size determination in two functions
  ARM: OMAP: Delete an error message for a failed memory allocation in two functions
  ARM: OMAP2+: make omap_dma_dev_info __initdata
  ARM: DRA722: Add support for DRA71x Silicon Rev 2.1
  ARM: DRA722: remove redundant definition of 1.0 device
  ARM: OMAP2+: Drop unused omap_hwmod_mux_info
  ARM: OMAP2+: Drop unused omap_init_hdq
  ARM: OMAP2+: Fix overwriting of clkctrl and modulemode values
  ARM: OMAP2+: Fix MMC address space mismatch for am33xx and am43xx

Merge tag 'davinci-for-v4.15/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "DaVinci defconfig updates for v4.15" from Sekhar Nori:

Enable CMA and MTD command line partitioning support.

* tag 'davinci-for-v4.15/defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: enable CMA options
  ARM: davinci_all_defconfig: enable MTD_CMDLINE_PARTS

Pull "ARM64: hisilicon: defconfig updates for 4.15" from Wei Xu:

- Enable DRM_HISI_HIBMC for the D03/D05 board

* tag 'hisi-defconfig-for-4.15' of git://github.com/hisilicon/linux-hisi:
  arm64: defconfig: Enable hisilicon hibmc drm driver

Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the
Dragonboard 410c. With this change, graphics console and GPU are working
fine (using mesa/freedreno for GPU driver).
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ThunderX needs its PCI host drivers to do anything useful, and
it's probably helpful to have networking by default too.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-soc2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Second Round of Renesas ARM Based SoC Updates for v4.15" from Simon Horman:

Fix to allow UP build of shmobile.

Arnd Bergmann says:

  A bugfix for the SMP case broke the build for the UP case:

  arch/arm/mach-shmobile/headsmp-apmu.o: In function `shmobile_boot_apmu':
  (.text+0x34): undefined reference to `secondary_startup'

  The assembler file mixes code that is used for SMP with code
  that we also need on a single-CPU build, so I'm leaving it
  always enabled in the Makefile, but enclose the SMP code
  in an #ifdef.

* tag 'renesas-soc2-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: rcar-gen2: fix non-SMP build

Merge tag 'vexpress-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/soc

Pull "ARMv7 Vexpress update/cleanup for v4.15" from Sudeep Holla:

Cosmetic cleanup dropping extra debug messages for memory allocation failures

* tag 'vexpress-updates-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  ARM: vexpress/spc: Delete an error message for a failed memory allocation

Merge tag 'renesas-arm64-defconfig-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM64 Based SoC Defconfig Updates for v4.15" from Simon Horman:

* Enable the following to allow further test coverage
  - r8a77970 (V3M) and r8a77995 (D3) R-Car Gen3 SoCs
  - R-Car Gen3 thermal driver.
    This is used on a range of R-Car Gen3 SoCs

* tag 'renesas-arm64-defconfig-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: defconfig: enable R8A77970 SoC
  arm64: defconfig: enable thermal driver for Renesas R-Car Gen3
  arm64: defconfig: Enable Renesas R8A77995 SoC

Merge tag 'integrator-pciv3-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

Pull "Delete old PCIv3 driver" from Linus Walleij:

This deletes the old PCIv3 driver in the Integrator machine.
It has been superceded by a modernized driver in the PCI
subsystem host/ directory.

* tag 'integrator-pciv3-delete' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: integrator: Delete the V3 PCI driver

Pull "Broadcom soc changes for 4.15 (part 1)" from Florian Fainelli:

This pull request contains Broadcom ARM-based SoC/Kconfig changes for 4.15
please pull the following:

- Danilo removes the clock provider driver stubs which are no longer needed
  now that we have a proper CPRMAN clock provider driver

- Stefan moves the SMP startup code for BCM2836 from the interrupt controller
  driver down to where it belongs in the architecture code, this was requested
  by Marc Zyngier before comitting any fixes to that code

- Phil provides a fix for a future Raspberry Pi firmware which will make the
  secondary cores wait for an event and therefore requires the CPU onlining
  other cores to send such event (along with the appropriate barrier)

- Florian fixes the BRCMSTB UART debug stub to work correctly when using an
  ARM BE8 kernel since there were some missing register read swapping needed

* tag 'arm-soc/for-4.15/soc' of http://github.com/Broadcom/stblinux:
  ARM: brcmstb: Add appropriate ARM_BE8() macros for swapping
  ARM: bcm2836: Send event when onlining other cores
  irqchip: bcm2836: Move SMP startup code to arch/arm (v2)
  clk: bcm2835: remove remains from stub clk driver

Merge tag 'renesas-soc-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC Updates for v4.15" from Simon Horman:

* Prepare to enable SMP on R-Car E2 (r8a7794).

  Geert Uytterhoeven says:
  "The main hurdle here is that R-Car Gen2 boot loaders do not initialize
   the arch_timer CNTVOFF register, which thus needs workarounds on Linux.

   - The first patch adds a definition for MON_MODE, as suggested by Marc
     Zyngier,
   - The second patch makes sure CNTVOFF is initialized for boot and
     secondary Cortex-A15 and Cortex-A7 CPU cores, like is already done for
     the boot Cortex-A7 CPU core.  Without this, the ARM arch timer does
     not work on secondary CPU cores."

   A follow-up patch to enable SMP in DT on R-Car E2 (r8a7794) is currently
   deferred unto v4.16 as it depends on the above.

* Enable low-level debugging support for RZ/G1E (r8a7745).

  Fabrizio Castro says, "RZ/G1E uses SCIF4 for the debug console."

* tag 'renesas-soc-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: rcar-gen2: Make sure CNTVOFF is initialized on CA7/15
  ARM: Add definition for monitor mode
  ARM: debug-ll: Add support for r8a7745

Merge tag 'renesas-defconfig-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

Pull "Renesas ARM Based SoC Defconfig Updates for v4.15" from Simon Horman:

Enable BQ32000 RTC driver in multi_v7_defconfig.

Biju Das says, "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000).
To increase hardware support enable the driver in the
multi_v7_defconfig multiplatform configuration."

* tag 'renesas-defconfig-for-v4.15' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: multi_v7_defconfig: Enable BQ32000 RTC driver

Merge tag 'ep93xx-for-arm-soc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/soc

Pull "EP93xx improvements for v4.15"

EP93xx patches that have been floating for a while,
converting the platform to sparsemem, using SPI-MMC
and a bit more.

* tag 'ep93xx-for-arm-soc-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: ep93xx: Add lm70 HWMON sensor to TS-72xx boards
  ARM: ep93xx: tidy up TS-72xx Watchdog resources
  ARM: ep93xx: simone: let the mmc_spi driver handle the card detect
  ARM: ep93xx: switch to SPARSEMEM

The driver has supported the 64-bit Tegra210 for a while now, so enable
it in the defconfig.
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Thierry Reding <treding@nvidia.com>

Stephen Boyd reworked some Qualcomm USB code earlier this year.
The result requires a few different config options to be enabled
in order for the USB on the DragonBoard 410c to continue working,
but these were never added to arm64 "defconfig".  As a result, USB
on that board stopped working during the v4.13-rc1 merge window.

Re-enable this functionality by setting the needed config options
in the arm64 "defconfig" file.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

This patch adds MDMA support in STM32 defconfig file
Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>

Looks like we're missing remove() that's needed if a driver instance
rebound. Otherwise we will get "Unbalanced pm_runtime_enable!".
Signed-off-by: Tony Lindgren <tony@atomide.com>

The new bus driver causes a harmless compile-time warning when
CONFIG_PM is disabled:

drivers/bus/ti-sysc.c:440:12: error: 'sysc_runtime_resume' defined but not used [-Werror=unused-function]
 static int sysc_runtime_resume(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~
drivers/bus/ti-sysc.c:421:12: error: 'sysc_runtime_suspend' defined but not used [-Werror=unused-function]
 static int sysc_runtime_suspend(struct device *dev)
            ^~~~~~~~~~~~~~~~~~~~

This marks the two unused functions as __maybe_unused to shut up
that warning.

Fixes: 0eecc636 ("bus: ti-sysc: Add minimal TI sysc interconnect target driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Fix to return error code -EINVAL from the irq_of_parse_and_map() error
handling case instead of 0, as done elsewhere in this function.

Fixes: d85a2d61 ("ARM: OMAP2+: Populate legacy resources for dma
and smartreflex")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Select CONFIG_DRM_DW_HDMI_CEC option, so that the CEC driver can be
loaded by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The Armada 38x RTC driver supports also the RTC controller found on the
Armada 7K/8K SoCs, so enable it.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Enable QCOM IOMMU driver for 'B' family devices, such as APQ8016 found on the
Dragonboard 410c. With this change, graphics console and GPU are working
fine (using mesa/freedreno for GPU driver).
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Select the options necessary to get USB, coincell, WiFI, touchscreen and
backlight on the Z2 Tablet (and other family B devices) working. The
device specific peripherals are selected as modules.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

GPIO debug spams the kernel log quite a bit, so remove this from the
default Qualcomm defconfig.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Enable the regulator driver, usb phy drivers, and hsic hub driver
to support USB devices on apq8064 and msm8974.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

CONFIG_HWSPINLOCK must be selected explicitly for SMEM and its
dependencies to be enabled.

The update is generated by "make savedefconfig" and as such reflects
changes to the implicit state of other options, as of v4.14-rc1.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>

Adjust three words in this description.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>

* A multiplication for the size determination of a memory allocation
  indicated that an array data structure should be processed.
  Thus use the corresponding function "kcalloc".

  This issue was detected by using the Coccinelle software.

* Replace the specification of a data type by a pointer dereference
  to make the corresponding size determination a bit safer according to
  the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>