- 18 Mar, 2015 40 commits
-
-
Lorenzo Pieralisi authored
commit d2be00c0 upstream. In the function of_pci_get_host_bridge_resources() if the parsing of ranges fails, previously allocated resources inclusive of bus_range are not freed and are not expected to be freed by the function caller on error return. This patch fixes the issues by adding code that properly frees resources and bus_range before exiting the function with an error return value. Fixes: cbe4097f ("of/pci: Add support for parsing PCI host bridge resources from DT") Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
Liviu Dudau <liviu.dudau@arm.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Rob Herring <robh+dt@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wanpeng Li authored
commit 86893335 upstream. The commit 177ef2a6 ("sched/deadline: Fix a precision problem in the microseconds range") forgot to change the UP version of hrtick_start(), do so now. Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Fixes: 177ef2a6 ("sched/deadline: Fix a precision problem in the microseconds range") [ Fixed the changelog. ] Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Juri Lelli <juri.lelli@arm.com> Cc: Kirill Tkhai <ktkhai@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/1416962647-76792-7-git-send-email-wanpeng.li@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit 6ad10959 upstream. There are some missing unlocks on the error paths. Fixes: a939fc5a ('coresight-etm: add CoreSight ETM/PTM driver') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Brian Norris authored
commit 5de61e7a upstream. The current organization of Documentation/stable_kernel_rules.txt doesn't clearly differentiate the mutually exclusive options for submission to the -stable review process. As I understand it, patches are not actually required to be mailed directly to stable@vger.kernel.org, but the instructions do not make this clear. Also, there are some established processes that are not listed -- specifically, what I call Option 2 below. This patch updates and reorganizes a bit, to make things clearer. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Bard Liao authored
commit 85052924 upstream. RT5670_IRQ_CTRL1(0xbd) is a non volatile register. And we need to restore its value after suspend/resume. Signed-off-by:
Bard Liao <bardliao@realtek.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
commit d51199a8 upstream. DMA_BIT_MASK of 64 is not valid dma address mask for OMAPs, it should be set to 32. The 64 was introduced by commit (in 2009): a152ff24 ASoC: OMAP: Make DMA 64 aligned But the dma_mask and coherent_dma_mask can not be used to specify alignment. Fixes: a152ff24 (ASoC: OMAP: Make DMA 64 aligned) Reported-by:
Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by:
-
Trond Myklebust authored
commit 7c0af9ff upstream. put_rpccred() can sleep. Fixes: 8f649c37 ("NFSv4: Fix the locking in nfs_inode_reclaim_delegation()") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Trond Myklebust authored
commit 6c441c25 upstream. If we're traversing a directory which contains a submounted filesystem, or one that has a referral, the NFS server that is processing the READDIR request will often return information for the underlying (mounted-on) directory. It may, or may not, also return filehandle information. If this happens, and the lookup in nfs_prime_dcache() returns the dentry for the submounted directory, the filehandle comparison will fail, and we call d_invalidate(). Post-commit 8ed936b5 ("vfs: Lazily remove mounts on unlinked files and directories."), this means the entire subtree is unmounted. The following minimal patch addresses this problem by punting on the invalidation if there is a submount. Kudos to Neil Brown <neilb@suse.de> for having tracked down this issue (see link). Reported-by:
Nix <nix@esperi.org.uk> Link: http://lkml.kernel.org/r/87iofju9ht.fsf@spindle.srvr.nixSigned-off-by:
-
Heikki Krogerus authored
commit fcf0789a upstream. Commit 7d78cbef (serial: 8250_dw: add ability to handle the peripheral clock) introduces handling for a second clk to 8250_dw.c which is the driver also for LPSS UART. The second clk forces us to provide identifier (con_id) for the clkdev we create. This fixes an issue where 8250_dw.c is getting the same handler for both clocks. Fixes: 7d78cbef (serial: 8250_dw: add ability to handle the peripheral clock) Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Chris Wilson authored
commit 6e17cb12 upstream. i915.ko depends upon the acpi/video.ko module and so refuses to load if ACPI is disabled at runtime if for example the BIOS is broken beyond repair. acpi/video provides an optional service for i915.ko and so we should just allow the modules to load, but do no nothing in order to let the machines boot correctly. Reported-by:
Bill Augur <bill-auger@programmer.net> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
Aaron Lu <aaron.lu@intel.com> [ rjw: Fixed up the new comment in acpi_video_init() ] Signed-off-by:
-
Tyler Hicks authored
commit 6d65261a upstream. eCryptfs can't be aware of what to expect when after passing an arbitrary ioctl command through to the lower filesystem. The ioctl command may trigger an action in the lower filesystem that is incompatible with eCryptfs. One specific example is when one attempts to use the Btrfs clone ioctl command when the source file is in the Btrfs filesystem that eCryptfs is mounted on top of and the destination fd is from a new file created in the eCryptfs mount. The ioctl syscall incorrectly returns success because the command is passed down to Btrfs which thinks that it was able to do the clone operation. However, the result is an empty eCryptfs file. This patch allows the trim, {g,s}etflags, and {g,s}etversion ioctl commands through and then copies up the inode metadata from the lower inode to the eCryptfs inode to catch any changes made to the lower inode's metadata. Those five ioctl commands are mostly common across all filesystems but the whitelist may need to be further pruned in the future. https://bugzilla.kernel.org/show_bug.cgi?id=93691 https://launchpad.net/bugs/1305335Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Cc: Rocko <rockorequin@hotmail.com> Cc: Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Yinghai Lu authored
commit 7ed620bb upstream. While adding support loading kernel and initrd above 4G to grub2 in legacy mode, I was referring to efi_high_alloc(). That will allocate buffer for kernel and then initrd, and initrd will use kernel buffer start as limit. During testing found two buffers will be overlapped when initrd size is very big like 400M. It turns out efi_high_alloc() boundary checking is not right. end - size will be the new start, and should not compare new start with max, we need to make sure end is smaller than max. [ Basically, with the current efi_high_alloc() code it's possible to allocate memory above 'max', because efi_high_alloc() doesn't check that the tail of the allocation is below 'max'. If you have an EFI memory map with a single entry that looks like so, [0xc0000000-0xc0004000] And want to allocate 0x3000 bytes below 0xc0003000 the current code will allocate [0xc0001000-0xc0004000], not [0xc0000000-0xc0003000] like you would expect. - Matt ] Signed-off-by:
Yinghai Lu <yinghai@kernel.org> Reviewed-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Reviewed-by:
Mark Rutland <mark.rutland@arm.com> Tested-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Dan Carpenter authored
commit 86d68a58 upstream. The "> 0" here should ">= 0" so we free map_entries[0]. Fixes: 926172d4 ('efi: Export EFI runtime memory mapping to sysfs') Signed-off-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
-
Andrew Elble authored
commit c876486b upstream. commit 2d4a532d ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock") removed the use of the reaplist to clean out clp->cl_revoked. It failed to change list_entry() to walk clp->cl_revoked.next instead of reaplist.next Fixes: 2d4a532d ("nfsd: ensure that clp->cl_revoked list is protected by clp->cl_lock") Reported-by:
Eric Meddaugh <etmsys@rit.edu> Tested-by:
Andrew Elble <aweits@rit.edu> Reviewed-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Michel Dänzer authored
commit 4eb2440e upstream. It was causing the return value of fence_is_signaled to be ignored, making reservation objects signal too early. Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Sumit Semwal <sumit.semwal@linaro.org> Signed-off-by:
-
Chris Wilson authored
commit 54fc7c1c upstream. When we takeover from the BIOS and install our interrupt handler, the BIOS may have left us a few surprises in the form of spontaneous interrupts. (This is especially likely on hardware like 965gm where display fifo underruns are continuous and the GMCH cannot filter that interrupt souce.) As we enable our IRQ early so that we can use it during hardware probing, our interrupt handler must be prepared to handle a few sources prior to being fully configured. As such, we need to add a simple is-ready check prior to dereferencing our KMS state for reporting underruns. Reported-by:
Rob Clark <rclark@redhat.com> Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1193972Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> [Jani: dropped the extra !] Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Imre Deak authored
commit 2dd2a883 upstream. Atm, it's possible that the interrupt handler is called when the device is in D3 or some other low-power state. It can be due to another device that is still in D0 state and shares the interrupt line with i915, or on some platforms there could be spurious interrupts even without sharing the interrupt line. The latter case was reported by Klaus Ethgen using a Lenovo x61p machine (gen 4). He noticed this issue via a system suspend/resume hang and bisected it to the following commit: commit e11aa362 Author: Jesse Barnes <jbarnes@virtuousgeek.org> Date: Wed Jun 18 09:52:55 2014 -0700 drm/i915: use runtime irq suspend/resume in freeze/thaw This is a problem, since in low-power states IIR will always read 0xffffffff resulting in an endless IRQ servicing loop. Fix this by handling interrupts only when the driver explicitly enables them and so it's guaranteed that the interrupt registers return a valid value. Note that this issue existed even before the above commit, since during runtime suspend/resume we never unregistered the handler. v2: - clarify the purpose of smp_mb() vs. synchronize_irq() in the code comment (Chris) v3: - no need for an explicit smp_mb(), we can assume that synchronize_irq() and the mmio read/writes in the install hooks provide for this (Daniel) - remove code comment as the remaining synchronize_irq() is self explanatory (Daniel) v4: - drm_irq_uninstall() implies synchronize_irq(), so no need to call it explicitly (Daniel) Reference: https://lkml.org/lkml/2015/2/11/205Reported-and-bisected-by:
Klaus Ethgen <Klaus@Ethgen.ch> Signed-off-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Jani Nikula authored
commit cf6f0af9 upstream. Add quirk for Dell Chromebook 11 backlight. Reported-and-tested-by:
Owen Garland <garland.owen@gmail.com> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=93451Acked-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
-
Chris Wilson authored
commit 6c31a614 upstream. When we walk the list of vma, or even for protecting against concurrent framebuffer creation, we must hold the struct_mutex or else a second thread can corrupt the list as we walk it. Fixes regression from commit d7f46fc4 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Fri Dec 6 14:10:55 2013 -0800 drm/i915: Make pin count per VMA References: https://bugs.freedesktop.org/show_bug.cgi?id=89085Signed-off-by:
-
Rodrigo Vivi authored
commit 0dc6f20b upstream. When reviewing patch that fixes VGA on BDW Halo Jani noticed that we also had other ULT IDs that weren't listed there. So this follow-up patch add these pci-ids as halo and fix comments on i915_pciids.h Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Alex Deucher authored
commit dbfb00c3 upstream. The logic was reversed from what the hw actually exposed. Fixes graphics corruption in certain harvest configurations. Signed-off-by:
-
Alex Deucher authored
commit 3d2d98ee upstream. Just in case it hasn't been calculated for the mode. Signed-off-by:
-
Nathan-J. Hirschauer authored
commit 7a26f9ad upstream. Commit b7bc596e ("drm/radeon: disable native backlight control on pre-r6xx asics (v2)") accidently broke backlight control on old mac laptops that use the on-GPU backlight controller. Signed-off-by:
Nathan-J. Hirschauer <nathanhi@deepserve.info> Signed-off-by:
-
Jason Gerecke authored
commit 33e5df0e upstream. It appears that the Cintiq Companion Hybrid does not send an ABS_MISC event to userspace when any of its ExpressKeys are pressed. This is not strictly necessary now that the pad exists on its own device, but should be fixed for consistency's sake. Traditionally both the stylus and pad shared the same device node, and xf86-input-wacom would use ABS_MISC for disambiguation. Not sending this causes the Hybrid to behave incorrectly with xf86-input-wacom beginning with its 8f44f3 commit. Signed-off-by:
Jason Gerecke <killertofu@gmail.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Jiri Kosina authored
commit 8e7b3410 upstream. The ignore check that got added in 6ce901eb ("HID: input: fix confusion on conflicting mappings") needs to properly check for VARIABLE reports as well (ARRAY reports should be ignored), otherwise legitimate keyboards might break. Fixes: 6ce901eb ("HID: input: fix confusion on conflicting mappings") Reported-by:
Fredrik Hallenberg <megahallon@gmail.com> Reported-by:
David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
-
David Herrmann authored
commit 6ce901eb upstream. On an PC-101/103/104 keyboard (American layout) the 'Enter' key and its neighbours look like this: +---+ +---+ +-------+ | 1 | | 2 | | 5 | +---+ +---+ +-------+ +---+ +-----------+ | 3 | | 4 | +---+ +-----------+ On a PC-102/105 keyboard (European layout) it looks like this: +---+ +---+ +-------+ | 1 | | 2 | | | +---+ +---+ +-+ 4 | +---+ +---+ | | | 3 | | 5 | | | +---+ +---+ +-----+ (Note that the number of keys is the same, but key '5' is moved down and the shape of key '4' is changed. Keys '1' to '3' are exactly the same.) The keys 1-4 report the same scan-code in HID in both layouts, even though the keysym they produce is usually different depending on the XKB-keymap used by user-space. However, key '5' (US 'backslash'/'pipe') reports 0x31 for the upper layout and 0x32 for the lower layout, as defined by the HID spec. This is highly confusing as the linux-input API uses a single keycode for both. So far, this was never a problem as there never has been a keyboard with both of those keys present at the same time. It would have to look something like this: +---+ +---+ +-------+ | 1 | | 2 | | x31 | +---+ +---+ +-------+ +---+ +---+ +-----+ | 3 | |x32| | 4 | +---+ +---+ +-----+ HID can represent such a keyboard, but the linux-input API cannot. Furthermore, any user-space mapping would be confused by this and, luckily, no-one ever produced such hardware. Now, the HID input layer fixed this mess by mapping both 0x31 and 0x32 to the same keycode (KEY_BACKSLASH==0x2b). As only one of both physical keys is present on a hardware, this works just fine. Lets introduce hardware-vendors into this: ------------------------------------------ Unfortunately, it seems way to expensive to produce a different device for American and European layouts. Therefore, hardware-vendors put both keys, (0x31 and 0x32) on the same keyboard, but only one of them is hooked up to the physical button, the other one is 'dead'. This means, they can use the same hardware, with a different button-layout and automatically produce the correct HID events for American *and* European layouts. This is unproblematic for normal keyboards, as the 'dead' key will never report any KEY-DOWN events. But RollOver keyboards send the whole matrix on each key-event, allowing n-key roll-over mode. This means, we get a 0x31 and 0x32 event on each key-press. One of them will always be 0, the other reports the real state. As we map both to the same keycode, we will get spurious key-events, even though the real key-state never changed. The easiest way would be to blacklist 'dead' keys and never handle those. We could simply read the 'country' tag of USB devices and blacklist either key according to the layout. But... hardware vendors... want the same device for all countries and thus many of them set 'country' to 0 for all devices. Meh.. So we have to deal with this properly. As we cannot know which of the keys is 'dead', we either need a heuristic and track those keys, or we simply make use of our value-tracking for HID fields. We simply ignore HID events for absolute data if the data didn't change. As HID tracks events on the HID level, we haven't done the keycode translation, yet. Therefore, the 'dead' key is tracked independently of the real key, therefore, any events on it will be ignored. This patch simply discards any HID events for absolute data if it didn't change compared to the last report. We need to ignore relative and buffered-byte reports for obvious reasons. But those cannot be affected by this bug, so we're fine. Preferably, we'd do this filtering on the HID-core level. But this might break a lot of custom drivers, if they do not follow the HID specs. Therefore, we do this late in hid-input just before we inject it into the input layer (which does the exact same filtering, but on the keycode level). If this turns out to break some devices, we might have to limit filtering to EV_KEY events. But lets try to do the Right Thing first, and properly filter any absolute data that didn't change. This patch is tagged for 'stable' as it fixes a lot of n-key RollOver hardware. We might wanna wait with backporting for a while, before we know it doesn't break anything else, though. Reported-by:
Adam Goode <adam@spicenitz.org> Reported-by:
-
Ian Abbott authored
commit be8e8908 upstream. The hardware range code values and list of valid ranges for the AI subdevice is incorrect for several supported boards. The hardware range code values for all boards except PCI-DAS4020/12 is determined by calling `ai_range_bits_6xxx()` based on the maximum voltage of the range and whether it is bipolar or unipolar, however it only returns the correct hardware range code for the PCI-DAS60xx boards. For PCI-DAS6402/16 (and /12) it returns the wrong code for the unipolar ranges. For PCI-DAS64/Mx/16 it returns the wrong code for all the ranges and the comedi range table is incorrect. Change `ai_range_bits_6xxx()` to use a look-up table pointed to by new member `ai_range_codes` of `struct pcidas64_board` to map the comedi range table indices to the hardware range codes. Use a new comedi range table for the PCI-DAS64/Mx/16 boards (and the commented out variants). Signed-off-by:
Ian Abbott <abbotti@mev.co.uk> Signed-off-by:
-
Ivan Khoronzhuk authored
commit ce204e9a upstream. The dmi-sysfs should create "End of Table" entry, that is type 127. But after adding initial SMBIOS v3 support fc430262 ("dmi: add support for SMBIOS 3.0 64-bit entry point") the 127-0 entry is not handled any more, as result it's not created in dmi sysfs for instance. This is important because the size of whole DMI table must correspond to sum of all DMI entry sizes. So move the end-of-table check after it's handled by dmi_table. Reviewed-by:
Ard Biesheuvel <ard@linaro.org> Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by:
-
Ivan Khoronzhuk authored
commit 6d9ff473 upstream. According to SMBIOSv3 specification the length of DMI table can be up to 32bits wide. So use appropriate type to avoid overflow. It's obvious that dmi_num theoretically can be more than u16 also, so it's can be changed to u32 or at least it's better to use int instead of u16, but on that moment I cannot imagine dmi structure count more than 65535 and it can require changing type of vars that work with it. So I didn't correct it. Acked-by:
-
Mikulas Patocka authored
commit 22aa66a3 upstream. When the snapshot target is unloaded, snapshot_dtr() waits until pending_exceptions_count drops to zero. Then, it destroys the snapshot. Therefore, the function that decrements pending_exceptions_count should not touch the snapshot structure after the decrement. pending_complete() calls free_pending_exception(), which decrements pending_exceptions_count, and then it performs up_write(&s->lock) and it calls retry_origin_bios() which dereferences s->origin. These two memory accesses to the fields of the snapshot may touch the dm_snapshot struture after it is freed. This patch moves the call to free_pending_exception() to the end of pending_complete(), so that the snapshot will not be destroyed while pending_complete() is in progress. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 2bec1f4a upstream. The function dm_get_md finds a device mapper device with a given dev_t, increases the reference count and returns the pointer. dm_get_md calls dm_find_md, dm_find_md takes _minor_lock, finds the device, tests that the device doesn't have DMF_DELETING or DMF_FREEING flag, drops _minor_lock and returns pointer to the device. dm_get_md then calls dm_get. dm_get calls BUG if the device has the DMF_FREEING flag, otherwise it increments the reference count. There is a possible race condition - after dm_find_md exits and before dm_get is called, there are no locks held, so the device may disappear or DMF_FREEING flag may be set, which results in BUG. To fix this bug, we need to call dm_get while we hold _minor_lock. This patch renames dm_find_md to dm_get_md and changes it so that it calls dm_get while holding the lock. Signed-off-by:
-
Darrick J. Wong authored
commit 37527b86 upstream. I created a dm-raid1 device backed by a device that supports DISCARD and another device that does NOT support DISCARD with the following dm configuration: # echo '0 2048 mirror core 1 512 2 /dev/sda 0 /dev/sdb 0' | dmsetup create moo # lsblk -D NAME DISC-ALN DISC-GRAN DISC-MAX DISC-ZERO sda 0 4K 1G 0 `-moo (dm-0) 0 4K 1G 0 sdb 0 0B 0B 0 `-moo (dm-0) 0 4K 1G 0 Notice that the mirror device /dev/mapper/moo advertises DISCARD support even though one of the mirror halves doesn't. If I issue a DISCARD request (via fstrim, mount -o discard, or ioctl BLKDISCARD) through the mirror, kmirrord gets stuck in an infinite loop in do_region() when it tries to issue a DISCARD request to sdb. The problem is that when we call do_region() against sdb, num_sectors is set to zero because q->limits.max_discard_sectors is zero. Therefore, "remaining" never decreases and the loop never terminates. To fix this: before entering the loop, check for the combination of REQ_DISCARD and no discard and return -EOPNOTSUPP to avoid hanging up the mirror device. This bug was found by the unfortunate coincidence of pvmove and a discard operation in the RHEL 6.5 kernel; upstream is also affected. Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Acked-by:
"Martin K. Petersen" <martin.petersen@oracle.com> Signed-off-by:
-
Mikulas Patocka authored
commit f2ed51ac upstream. It may be possible that a device claims discard support but it rejects discards with -EOPNOTSUPP. It happens when using loopback on ext2/ext3 filesystem driven by the ext4 driver. It may also happen if the underlying devices are moved from one disk on another. If discard error happens, we reject the bio with -EOPNOTSUPP, but we do not degrade the array. This patch fixes failed test shell/lvconvert-repair-transient.sh in the lvm2 testsuite if the testsuite is extracted on an ext2 or ext3 filesystem and it is being driven by the ext4 driver. Signed-off-by:
-
Ian Abbott authored
commit 42b8ce6f upstream. `do_cmd_ioctl()` in "comedi_fops.c" handles the `COMEDI_CMD` ioctl. This returns `-EAGAIN` if it has copied a modified `struct comedi_cmd` back to user-space. (This occurs when the low-level Comedi driver's `do_cmdtest()` handler returns non-zero to indicate a problem with the contents of the `struct comedi_cmd`, or when the `struct comedi_cmd` has the `CMDF_BOGUS` flag set.) `compat_cmd()` in "comedi_compat32.c" handles the 32-bit compatible version of the `COMEDI_CMD` ioctl. Currently, it never copies a 32-bit compatible version of `struct comedi_cmd` back to user-space, which is at odds with the way the regular `COMEDI_CMD` ioctl is handled. To fix it, change `compat_cmd()` to copy a 32-bit compatible version of the `struct comedi_cmd` back to user-space when the main ioctl handler returns `-EAGAIN`. Signed-off-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by:
-
Hans de Goede authored
commit 76820fcf upstream. For all pll-s on sun6i n == 0 means use a multiplier of 1, rather then 0 as it means on sun4i / sun5i / sun7i. n_start = 1 is already correctly set for sun6i pll6, but was missing for pll1, this commit fixes this. Cc: Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
-
Srinivas Kandagatla authored
commit 52bba980 upstream. Some of the clks can be registered & unregistered before the clk related debugfs entries are initialized at late_initcall. In the unregister path checking for only dentry before clk_debug_init() would lead dangling pointers in the debug clk list, because the list is already populated in register path and the clk pointer freed in unregister path. The side effect of not removing it from the list is either a null pointer dereference or if lucky to boot the system, the number of clk entries in debugfs disappear. We could add more checks like if (inited && !clk->dentry) but just removing the check for dentry made more sense as debugfs_remove_recursive() seems to be safe with null pointers. This will ensure that the unregistering clk would be removed from the debug list in all the code paths. Without this patch kernel would crash with log: Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0204000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 1 PID: 1 Comm: swapper/0 Tainted: G B 3.19.0-rc3-00007-g412f9ba-dirty #840 Hardware name: Qualcomm (Flattened Device Tree) task: ed948000 ti: ed944000 task.ti: ed944000 PC is at strlen+0xc/0x40 LR is at __create_file+0x64/0x1dc pc : [<c04ee604>] lr : [<c049f1c4>] psr: 60000013 sp : ed945e40 ip : ed945e50 fp : ed945e4c r10: 00000000 r9 : c1006094 r8 : 00000000 r7 : 000041ed r6 : 00000000 r5 : ed4af998 r4 : c11b5e28 r3 : 00000000 r2 : ed945e38 r1 : a0000013 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5787d Table: 8020406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xed944248) Stack: (0xed945e40 to 0xed946000) 5e40: ed945e7c ed945e50 c049f1c4 c04ee604 c0fc2fa4 00000000 ecb748c0 c11c2b80 5e60: c0beec04 0000011c c0fc2fa4 00000000 ed945e94 ed945e80 c049f3e0 c049f16c 5e80: 00000000 00000000 ed945eac ed945e98 c08cbc50 c049f3c0 ecb748c0 c11c2b80 5ea0: ed945ed4 ed945eb0 c0fc3080 c08cbc30 c0beec04 c107e1d8 ecdf0600 c107e1d8 5ec0: c107e1d8 ecdf0600 ed945f54 ed945ed8 c0208ed4 c0fc2fb0 c026a784 c04ee628 5ee0: ed945f0c ed945ef0 c0f5d600 c04ee604 c0f5d5ec ef7fcc7d c0b40ecc 0000011c 5f00: ed945f54 ed945f10 c026a994 c0f5d5f8 c04ecc00 00000007 ef7fcc95 00000007 5f20: c0e90744 c0dd0884 ed945f54 c106cde0 00000007 c117f8c0 0000011c c0f5d5ec 5f40: c1006094 c100609c ed945f94 ed945f58 c0f5de34 c0208e50 00000007 00000007 5f60: c0f5d5ec be9b5ae0 00000000 c117f8c0 c0af1680 00000000 00000000 00000000 5f80: 00000000 00000000 ed945fac ed945f98 c0af169c c0f5dd2c ed944000 00000000 5fa0: 00000000 ed945fb0 c020f298 c0af168c 00000000 00000000 00000000 00000000 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000 ebcc6d33 bfffca73 [<c04ee604>] (strlen) from [<c049f1c4>] (__create_file+0x64/0x1dc) [<c049f1c4>] (__create_file) from [<c049f3e0>] (debugfs_create_dir+0x2c/0x34) [<c049f3e0>] (debugfs_create_dir) from [<c08cbc50>] (clk_debug_create_one+0x2c/0x16c) [<c08cbc50>] (clk_debug_create_one) from [<c0fc3080>] (clk_debug_init+0xdc/0x144) [<c0fc3080>] (clk_debug_init) from [<c0208ed4>] (do_one_initcall+0x90/0x1e0) [<c0208ed4>] (do_one_initcall) from [<c0f5de34>] (kernel_init_freeable+0x114/0x1e0) [<c0f5de34>] (kernel_init_freeable) from [<c0af169c>] (kernel_init+0x1c/0xfc) [<c0af169c>] (kernel_init) from [<c020f298>] (ret_from_fork+0x14/0x3c) Code: c0b40ecc e1a0c00d e92dd800 e24cb004 (e5d02000) ---[ end trace b940e45b5e25c1e7 ]--- Fixes: 6314b679 "clk: Don't hold prepare_lock across debugfs creation" Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Reviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
Michael Turquette <mturquette@linaro.org> Signed-off-by:
-
Soren Brinkmann authored
commit 3dccfecd upstream. The CPU_2X clock does not have a classical in-kernel user, but is, amongst other things, required for OCM and debug access. Make sure this clock is not mistakenly disabled during boot up by enabling it in the platform's clock driver. Fixes: 0ee52b15 'clk: zynq: Add clock controller driver' Signed-off-by:
Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
-
Minh Duc Tran authored
fixed invalid assignment of 64bit mask to host dma_boundary for scatter gather segment boundary limit. commit f76a610a upstream. In reference to bug https://bugzilla.redhat.com/show_bug.cgi?id=1097141 Assert is seen with AMD cpu whenever calling pci_alloc_consistent. [ 29.406183] ------------[ cut here ]------------ [ 29.410505] kernel BUG at lib/iommu-helper.c:13! Signed-off-by:
Minh Tran <minh.tran@emulex.com> Fixes: 6733b39aSigned-off-by:
James Bottomley <JBottomley@Parallels.com> Signed-off-by:
-
Ondrej Zary authored
commit 2ecf8e0a upstream. wd719x_template is missing the .module field, causing module refcount not to work, allowing to rmmod the driver while in use (mounted filesystem), causing an oops. Set .module to THIS_MODULE to fix the problem. Signed-off-by:
Ondrej Zary <linux@rainbow-software.org> Signed-off-by:
-
Ryusuke Konishi authored
commit 957ed60b upstream. Each inode of nilfs2 stores a root node of a b-tree, and it turned out to have a memory overrun issue: Each b-tree node of nilfs2 stores a set of key-value pairs and the number of them (in "bn_nchildren" member of nilfs_btree_node struct), as well as a few other "bn_*" members. Since the value of "bn_nchildren" is used for operations on the key-values within the b-tree node, it can cause memory access overrun if a large number is incorrectly set to "bn_nchildren". For instance, nilfs_btree_node_lookup() function determines the range of binary search with it, and too large "bn_nchildren" leads nilfs_btree_node_get_key() in that function to overrun. As for intermediate b-tree nodes, this is prevented by a sanity check performed when each node is read from a drive, however, no sanity check has been done for root nodes stored in inodes. This patch fixes the issue by adding missing sanity check against b-tree root nodes so that it's called when on-memory inodes are read from ifile, inode metadata file. Signed-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
