- 09 Jul, 2020 32 commits
-
-
Hauke Mehrtens authored
commit fcec538e upstream. This resolves the hazard between the mtc0 in the change_c0_status() and the mfc0 in configure_exception_vector(). Without resolving this hazard configure_exception_vector() could read an old value and would restore this old value again. This would revert the changes change_c0_status() did. I checked this by printing out the read_c0_status() at the end of per_cpu_trap_init() and the ST0_MX is not set without this patch. The hazard is documented in the MIPS Architecture Reference Manual Vol. III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev 6.03 table 8.1 which includes: Producer | Consumer | Hazard ----------|----------|---------------------------- mtc0 | mfc0 | any coprocessor 0 register I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU. There the change_c0_status() function would activate the DSPen by setting ST0_MX in the c0_status register. This was reverted and then the system got a DSP exception when the DSP registers were saved in save_dsp() in the first process switch. The crash looks like this: [ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.107070] Kernel panic - not syncing: Unexpected DSP exception [ 0.113470] Rebooting in 1 seconds.. We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs, not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it did not happen. In the kernel I bisected this problem to commit 9012d011 ("compiler: allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was reverted it also happened after commit 172dcd93 ("MIPS: Always allocate exception vector for MIPSr2+"). Commit 0b24cae4 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.") does similar changes to a different file. I am not sure if there are more places affected by this problem. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Cc: <stable@vger.kernel.org> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Zhang Xiaoxu authored
commit 9ffad926 upstream. When xfstest generic/035, we found the target file was deleted if the rename return -EACESS. In cifs_rename2, we unlink the positive target dentry if rename failed with EACESS or EEXIST, even if the target dentry is positived before rename. Then the existing file was deleted. We should just delete the target file which created during the rename. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhang Xiaoxu <zhangxiaoxu5@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
Steve French <stfrench@microsoft.com> Reviewed-by:
Aurelien Aptel <aaptel@suse.com> Signed-off-by:
-
Paul Aurich authored
commit ad35f169 upstream. Fixes: 3e7a02d4 ("smb3: allow disabling requesting leases") Signed-off-by:
Paul Aurich <paul@darkrain42.org> CC: Stable <stable@vger.kernel.org> Signed-off-by:
-
Paul Aurich authored
commit 00dfbc2f upstream. Without this: - persistent handles will only be enabled for per-user tcons if the server advertises the 'Continuous Availabity' capability - resilient handles would never be enabled for per-user tcons Signed-off-by:
-
Paul Aurich authored
commit cc15461c upstream. Ensure multiuser SMB3 mounts use encryption for all users' tcons if the mount options are configured to require encryption. Without this, only the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user tcons would only be encrypted if the server was configured to require encryption. Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 2d50acd7 which is commit f0bd62b6 upstream. It causes a number of reported issues and a fix for it has not hit Linus's tree yet. Revert this to resolve those problems. Cc: Alexander Tsoy <alexander@tsoy.me> Cc: Takashi Iwai <tiwai@suse.de> Cc: Sasha Levin <sashal@kernel.org> Cc: Hans de Goede <jwrdegoede@fedoraproject.org> Signed-off-by:
-
J. Bruce Fields authored
commit 22cf8419 upstream. The server is failing to apply the umask when creating new objects on filesystems without ACL support. To reproduce this, you need to use NFSv4.2 and a client and server recent enough to support umask, and you need to export a filesystem that lacks ACL support (for example, ext4 with the "noacl" mount option). Filesystems with ACL support are expected to take care of the umask themselves (usually by calling posix_acl_create). For filesystems without ACL support, this is up to the caller of vfs_create(), vfs_mknod(), or vfs_mkdir(). Reported-by:
Elliott Mitchell <ehem+debian@m5p.com> Reported-by:
Salvatore Bonaccorso <carnil@debian.org> Tested-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Wolfram Sang authored
[ Upstream commit 59791128 ] I2C_SMBUS_BLOCK_MAX defines already the maximum number as defined in the SMBus 2.0 specs. I don't see a reason to add 1 here. Also, fix the errno to what is suggested for this error. Fixes: c9bfdc7c ("i2c: mlxcpld: Add support for smbus block read transaction") Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Michael Shych <michaelsh@mellanox.com> Tested-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chris Packham authored
[ Upstream commit cd217f23 ] The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck low, this differs to the PCA9564 which uses 90h for this indication. Treat either 0x78 or 0x90 as an indication that the SCL line is stuck. Based on looking through the PCA9564 and PCA9665 datasheets this should be safe for both chips. The PCA9564 should not return 0x78 for any valid state and the PCA9665 should not return 0x90. Fixes: eff9ec95 ("i2c-algo-pca: Add PCA9665 support") Signed-off-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
-
Christoph Hellwig authored
[ Upstream commit 72d44711 ] For private namespaces ns->head_disk is NULL, so add a NULL check before updating the BDI capabilities. Fixes: b2ce4d90 ("nvme-multipath: set bdi capabilities once") Reported-by:
Avinash M N <Avinash.M.N@wdc.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Sagi Grimberg <sagi@grimberg.me> Reviewed-by:
Max Gurtovoy <maxg@mellanox.com> Signed-off-by:
-
Paul Aurich authored
[ Upstream commit 5391b8e1 ] The flag from the primary tcon needs to be copied into the volume info so that cifs_get_tcon will try to enable extensions on the per-user tcon. At that point, since posix extensions must have already been enabled on the superblock, don't try to needlessly adjust the mount flags. Fixes: ce558b0e ("smb3: Add posix create context for smb3.11 posix mounts") Fixes: b326614e ("smb3: allow "posix" mount option to enable new SMB311 protocol extensions") Signed-off-by:
-
Hou Tao authored
[ Upstream commit e7eea44e ] Else there will be memory leak if alloc_disk() fails. Fixes: 6a27b656 ("block: virtio-blk: support multi virt queues per virtio-blk device") Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Chen-Yu Tsai authored
[ Upstream commit bda8eaa6 ] The HPD sense mechanism in Allwinner's old HDMI encoder hardware is more or less an input-only GPIO. Other GPIO-based HPD implementations directly return the current state, instead of polling for a specific state and returning the other if that times out. Remove the I/O polling from sun4i_hdmi_connector_detect() and directly return a known state based on the current reading. This also gets rid of excessive CPU usage by kworker as reported on Stack Exchange [1] and Armbian forums [2]. [1] https://superuser.com/questions/1515001/debian-10-buster-on-cubietruck-with-bug-in-sun4i-drm-hdmi [2] https://forum.armbian.com/topic/14282-headless-systems-and-sun4i_drm_hdmi-a10a20/ Fixes: 9c568101 ("drm/sun4i: Add HDMI support") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20200629060032.24134-1-wens@kernel.orgSigned-off-by:
-
Misono Tomohiro authored
[ Upstream commit 8b97f992 ] Although it rarely happens, we should call free_capabilities() if error happens after read_capabilities() to free allocated strings. Fixes: de584afa ("hwmon driver for ACPI 4.0 power meters") Signed-off-by:
Misono Tomohiro <misono.tomohiro@jp.fujitsu.com> Link: https://lore.kernel.org/r/20200625043242.31175-1-misono.tomohiro@jp.fujitsu.comSigned-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Chu Lin authored
[ Upstream commit 016983d1 ] Per the datasheet for max6697, OVERT mask and ALERT mask are different. For example, the 7th bit of OVERT is the local channel but for alert mask, the 6th bit is the local channel. Therefore, we can't apply the same mask for both registers. In addition to that, the max6697 driver is supposed to be compatibale with different models. I manually went over all the listed chips and made sure all chip types have the same layout. Testing; mask value of 0x9 should map to 0x44 for ALERT and 0x84 for OVERT. I used iotool to read the reg value back to verify. I only tested this change on max6581. Reference: https://datasheets.maximintegrated.com/en/ds/MAX6581.pdf https://datasheets.maximintegrated.com/en/ds/MAX6697.pdf https://datasheets.maximintegrated.com/en/ds/MAX6699.pdfSigned-off-by:
Chu Lin <linchuyuan@google.com> Fixes: 5372d2d7 ("hwmon: Driver for Maxim MAX6697 and compatibles") Signed-off-by:
-
Rahul Lakkireddy authored
[ Upstream commit 1992ded5 ] The data in destination buffer is expected to be be parsed in big endian. So, use the right context. Fixes following sparse warning: cudbg_lib.c:2041:44: warning: incorrect type in assignment (different base types) cudbg_lib.c:2041:44: expected unsigned long long [usertype] cudbg_lib.c:2041:44: got restricted __be64 [usertype] Fixes: 736c3b94 ("cxgb4: collect egress and ingress SGE queue contexts") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Rahul Lakkireddy authored
[ Upstream commit f286dd8e ] Use correct type to check for all-mask exact match IP addresses. Fixes following sparse warnings due to big endian value checks against 0xffffffff in is_addr_all_mask(): cxgb4_filter.c:977:25: warning: restricted __be32 degrades to integer cxgb4_filter.c:983:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:984:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:985:37: warning: restricted __be32 degrades to integer cxgb4_filter.c:986:37: warning: restricted __be32 degrades to integer Fixes: 3eb8b62d ("cxgb4: add support to create hash-filters via tc-flower offload") Signed-off-by:
-
Rahul Lakkireddy authored
[ Upstream commit 27f78cb2 ] TC-U32 passes all keys values and masks in __be32 format. The parser already expects this and hence pass the value and masks in __be32 natively to the parser. Fixes following sparse warnings in several places: cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base types) cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32 Fixes: 2e8aad7b ("cxgb4: add parser to translate u32 filters to internal spec") Signed-off-by:
-
Rahul Lakkireddy authored
[ Upstream commit 589b1c9c ] Use get_unaligned_be64() to fetch the timestamp needed for ns_to_ktime() conversion. Fixes following sparse warning: sge.c:3282:43: warning: cast to restricted __be64 Fixes: a4569504 ("cxgb4: time stamping interface for PTP") Signed-off-by:
-
Chen Tao authored
[ Upstream commit aa472721 ] Fix to return negative error code -ENOMEM with the use of ERR_PTR from dpu_encoder_init. Fixes: 25fdd593 ("drm/msm: Add SDM845 DPU support") Signed-off-by:
Chen Tao <chentao107@huawei.com> Signed-off-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
-
Herbert Xu authored
commit 34c86f4c upstream. The locking in af_alg_release_parent is broken as the BH socket lock can only be taken if there is a code-path to handle the case where the lock is owned by process-context. Instead of adding such handling, we can fix this by changing the ref counts to atomic_t. This patch also modifies the main refcnt to include both normal and nokey sockets. This way we don't have to fudge the nokey ref count when a socket changes from nokey to normal. Credits go to Mauricio Faria de Oliveira who diagnosed this bug and sent a patch for it: https://lore.kernel.org/linux-crypto/20200605161657.535043-1-mfo@canonical.com/Reported-by:
Brian Moyles <bmoyles@netflix.com> Reported-by:
Mauricio Faria de Oliveira <mfo@canonical.com> Fixes: 37f96694 ("crypto: af_alg - Use bh_lock_sock in...") Cc: <stable@vger.kernel.org> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 440ab9e1 ] At times when I'm using kgdb I see a splat on my console about suspicious RCU usage. I managed to come up with a case that could reproduce this that looked like this: WARNING: suspicious RCU usage 5.7.0-rc4+ #609 Not tainted ----------------------------- kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 3 locks held by swapper/0/1: #0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c #1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac #2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac stack backtrace: CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609 Hardware name: Google Cheza (rev3+) (DT) Call trace: dump_backtrace+0x0/0x1b8 show_stack+0x1c/0x24 dump_stack+0xd4/0x134 lockdep_rcu_suspicious+0xf0/0x100 find_task_by_pid_ns+0x5c/0x80 getthread+0x8c/0xb0 gdb_serial_stub+0x9d4/0xd04 kgdb_cpu_enter+0x284/0x7ac kgdb_handle_exception+0x174/0x20c kgdb_brk_fn+0x24/0x30 call_break_hook+0x6c/0x7c brk_handler+0x20/0x5c do_debug_exception+0x1c8/0x22c el1_sync_handler+0x3c/0xe4 el1_sync+0x7c/0x100 rpmh_rsc_probe+0x38/0x420 platform_drv_probe+0x94/0xb4 really_probe+0x134/0x300 driver_probe_device+0x68/0x100 __device_attach_driver+0x90/0xa8 bus_for_each_drv+0x84/0xcc __device_attach+0xb4/0x13c device_initial_probe+0x18/0x20 bus_probe_device+0x38/0x98 device_add+0x38c/0x420 If I understand properly we should just be able to blanket kgdb under one big RCU read lock and the problem should go away. We'll add it to the beast-of-a-function known as kgdb_cpu_enter(). With this I no longer get any splats and things seem to work fine. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeidSigned-off-by:
Daniel Thompson <daniel.thompson@linaro.org> Signed-off-by:
-
Anton Eidelman authored
[ Upstream commit 489dd102 ] When scan_work calls nvme_mpath_add_disk() this holds ana_lock and invokes nvme_parse_ana_log(), which may issue IO in device_add_disk() and hang waiting for an accessible path. While nvme_mpath_set_live() only called when nvme_state_is_live(), a transition may cause NVME_SC_ANA_TRANSITION and requeue the IO. In order to recover and complete the IO ana_work on the same ctrl should be able to update the path state and remove NVME_NS_ANA_PENDING. The deadlock occurs because scan_work keeps holding ana_lock, so ana_work hangs [1]. Fix: Now nvme_mpath_add_disk() uses nvme_parse_ana_log() to obtain a copy of the ANA group desc, and then calls nvme_update_ns_ana_state() without holding ana_lock. [1]: kernel: Workqueue: nvme-wq nvme_scan_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: io_schedule+0x16/0x40 kernel: do_read_cache_page+0x438/0x830 kernel: read_cache_page+0x12/0x20 kernel: read_dev_sector+0x27/0xc0 kernel: read_lba+0xc1/0x220 kernel: efi_partition+0x1e6/0x708 kernel: check_partition+0x154/0x244 kernel: rescan_partitions+0xae/0x280 kernel: __blkdev_get+0x40f/0x560 kernel: blkdev_get+0x3d/0x140 kernel: __device_add_disk+0x388/0x480 kernel: device_add_disk+0x13/0x20 kernel: nvme_mpath_set_live+0x119/0x140 [nvme_core] kernel: nvme_update_ns_ana_state+0x5c/0x60 [nvme_core] kernel: nvme_set_ns_ana_state+0x1e/0x30 [nvme_core] kernel: nvme_parse_ana_log+0xa1/0x180 [nvme_core] kernel: nvme_mpath_add_disk+0x47/0x90 [nvme_core] kernel: nvme_validate_ns+0x396/0x940 [nvme_core] kernel: nvme_scan_work+0x24f/0x380 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x249/0x400 kernel: kthread+0x104/0x140 kernel: Workqueue: nvme-wq nvme_ana_work [nvme_core] kernel: Call Trace: kernel: __schedule+0x2b9/0x6c0 kernel: schedule+0x42/0xb0 kernel: schedule_preempt_disabled+0xe/0x10 kernel: __mutex_lock.isra.0+0x182/0x4f0 kernel: ? __switch_to_asm+0x34/0x70 kernel: ? select_task_rq_fair+0x1aa/0x5c0 kernel: ? kvm_sched_clock_read+0x11/0x20 kernel: ? sched_clock+0x9/0x10 kernel: __mutex_lock_slowpath+0x13/0x20 kernel: mutex_lock+0x2e/0x40 kernel: nvme_read_ana_log+0x3a/0x100 [nvme_core] kernel: nvme_ana_work+0x15/0x20 [nvme_core] kernel: process_one_work+0x1db/0x380 kernel: worker_thread+0x4d/0x400 kernel: kthread+0x104/0x140 kernel: ? process_one_work+0x380/0x380 kernel: ? kthread_park+0x80/0x80 kernel: ret_from_fork+0x35/0x40 Fixes: 0d0b660f ("nvme: add ANA support") Signed-off-by:
Anton Eidelman <anton@lightbitslabs.com> Signed-off-by:
-
Keith Busch authored
[ Upstream commit b2ce4d90 ] The queues' backing device info capabilities don't change with each namespace revalidation. Set it only when each path's request_queue is initially added to a multipath queue. Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
-
Christian Borntraeger authored
[ Upstream commit 827c4913 ] When specifying insanely large debug buffers a kernel warning is printed. The debug code does handle the error gracefully, though. Instead of duplicating the check let us silence the warning to avoid crashes when panic_on_warn is used. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Zqiang authored
[ Upstream commit 28ebeb8d ] BUG: memory leak unreferenced object 0xffff888055046e00 (size 256): comm "kworker/2:9", pid 2570, jiffies 4294942129 (age 1095.500s) hex dump (first 32 bytes): 00 70 04 55 80 88 ff ff 18 bb 5a 81 ff ff ff ff .p.U......Z..... f5 96 78 81 ff ff ff ff 37 de 8e 81 ff ff ff ff ..x.....7....... backtrace: [<00000000d121dccf>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline] [<00000000d121dccf>] slab_post_alloc_hook mm/slab.h:586 [inline] [<00000000d121dccf>] slab_alloc_node mm/slub.c:2786 [inline] [<00000000d121dccf>] slab_alloc mm/slub.c:2794 [inline] [<00000000d121dccf>] kmem_cache_alloc_trace+0x15e/0x2d0 mm/slub.c:2811 [<000000005c3c3381>] kmalloc include/linux/slab.h:555 [inline] [<000000005c3c3381>] usbtest_probe+0x286/0x19d0 drivers/usb/misc/usbtest.c:2790 [<000000001cec6910>] usb_probe_interface+0x2bd/0x870 drivers/usb/core/driver.c:361 [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551 [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724 [<000000003ef66004>] __device_attach_driver+0x1b6/0x240 drivers/base/dd.c:831 [<00000000eee53e97>] bus_for_each_drv+0x14e/0x1e0 drivers/base/bus.c:431 [<00000000bb0648d0>] __device_attach+0x1f9/0x350 drivers/base/dd.c:897 [<00000000838b324a>] device_initial_probe+0x1a/0x20 drivers/base/dd.c:944 [<0000000030d501c1>] bus_probe_device+0x1e1/0x280 drivers/base/bus.c:491 [<000000005bd7adef>] device_add+0x131d/0x1c40 drivers/base/core.c:2504 [<00000000a0937814>] usb_set_configuration+0xe84/0x1ab0 drivers/usb/core/message.c:2030 [<00000000e3934741>] generic_probe+0x6a/0xe0 drivers/usb/core/generic.c:210 [<0000000098ade0f1>] usb_probe_device+0x90/0xd0 drivers/usb/core/driver.c:266 [<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551 [<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724 Acked-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Kyungtae Kim <kt0755@gmail.com> Signed-off-by:
Zqiang <qiang.zhang@windriver.com> Link: https://lore.kernel.org/r/20200612035210.20494-1-qiang.zhang@windriver.comSigned-off-by:
-
Qian Cai authored
[ Upstream commit a68ee057 ] There is no need to copy SLUB_STATS items from root memcg cache to new memcg cache copies. Doing so could result in stack overruns because the store function only accepts 0 to clear the stat and returns an error for everything else while the show method would print out the whole stat. Then, the mismatch of the lengths returns from show and store methods happens in memcg_propagate_slab_attrs(): else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf)) buf = mbuf; max_attr_size is only 2 from slab_attr_store(), then, it uses mbuf[64] in show_stat() later where a bounch of sprintf() would overrun the stack variable. Fix it by always allocating a page of buffer to be used in show_stat() if SLUB_STATS=y which should only be used for debug purpose. # echo 1 > /sys/kernel/slab/fs_cache/shrink BUG: KASAN: stack-out-of-bounds in number+0x421/0x6e0 Write of size 1 at addr ffffc900256cfde0 by task kworker/76:0/53251 Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019 Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func Call Trace: number+0x421/0x6e0 vsnprintf+0x451/0x8e0 sprintf+0x9e/0xd0 show_stat+0x124/0x1d0 alloc_slowpath_show+0x13/0x20 __kmem_cache_create+0x47a/0x6b0 addr ffffc900256cfde0 is located in stack of task kworker/76:0/53251 at offset 0 in frame: process_one_work+0x0/0xb90 this frame has 1 object: [32, 72) 'lockdep_map' Memory state around the buggy address: ffffc900256cfc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffc900256cfd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffc900256cfd80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1 ^ ffffc900256cfe00: 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 00 ffffc900256cfe80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __kmem_cache_create+0x6ac/0x6b0 Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func Call Trace: __kmem_cache_create+0x6ac/0x6b0 Fixes: 107dab5c ("slub: slub-specific propagation changes") Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Cc: Glauber Costa <glauber@scylladb.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Link: http://lkml.kernel.org/r/20200429222356.4322-1-cai@lca.pwSigned-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dongli Zhang authored
[ Upstream commit 52f23478 ] The slub_debug is able to fix the corrupted slab freelist/page. However, alloc_debug_processing() only checks the validity of current and next freepointer during allocation path. As a result, once some objects have their freepointers corrupted, deactivate_slab() may lead to page fault. Below is from a test kernel module when 'slub_debug=PUF,kmalloc-128 slub_nomerge'. The test kernel corrupts the freepointer of one free object on purpose. Unfortunately, deactivate_slab() does not detect it when iterating the freechain. BUG: unable to handle page fault for address: 00000000123456f8 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI ... ... RIP: 0010:deactivate_slab.isra.92+0xed/0x490 ... ... Call Trace: ___slab_alloc+0x536/0x570 __slab_alloc+0x17/0x30 __kmalloc+0x1d9/0x200 ext4_htree_store_dirent+0x30/0xf0 htree_dirblock_to_tree+0xcb/0x1c0 ext4_htree_fill_tree+0x1bc/0x2d0 ext4_readdir+0x54f/0x920 iterate_dir+0x88/0x190 __x64_sys_getdents+0xa6/0x140 do_syscall_64+0x49/0x170 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Therefore, this patch adds extra consistency check in deactivate_slab(). Once an object's freepointer is corrupted, all following objects starting at this object are isolated. [akpm@linux-foundation.org: fix build with CONFIG_SLAB_DEBUG=n] Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Signed-off-by:
-
Tuomas Tynkkynen authored
[ Upstream commit b835a71e ] Syzbot reports an use-after-free in workqueue context: BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737 __smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline] smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278 check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644 process_one_work+0x777/0xf90 kernel/workqueue.c:2274 worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420 kthread+0x2df/0x300 kernel/kthread.c:255 It looks like that smsc95xx_unbind() is freeing the structures that are still in use by the concurrently running workqueue callback. Thus switch to using cancel_delayed_work_sync() to ensure the work callback really is no longer active. Reported-by: syzbot+29dc7d4ae19b703ff947@syzkaller.appspotmail.com Signed-off-by:
Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi> Signed-off-by:
-
Borislav Petkov authored
[ Upstream commit ee470bb2 ] Commit: da92110d ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") added support for F15h, model 0x60 CPUs but in doing so, missed to read back SCRCTRL PCI config register on F15h CPUs which are *not* model 0x60. Add that read so that doing $ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate can show the previously set DRAM scrub rate. Fixes: da92110d ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h") Reported-by:
Anders Andersson <pipatron@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: <stable@vger.kernel.org> #v4.4.. Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4Vw@mail.gmail.comSigned-off-by:
-
Hugh Dickins authored
[ Upstream commit 243bce09 ] Chris Murphy reports that a slightly overcommitted load, testing swap and zram along with i915, splats and keeps on splatting, when it had better fail less noisily: gnome-shell: page allocation failure: order:0, mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE), nodemask=(null),cpuset=/,mems_allowed=0 CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1 Call Trace: dump_stack+0x64/0x88 warn_alloc.cold+0x75/0xd9 __alloc_pages_slowpath.constprop.0+0xcfa/0xd30 __alloc_pages_nodemask+0x2df/0x320 alloc_slab_page+0x195/0x310 allocate_slab+0x3c5/0x440 ___slab_alloc+0x40c/0x5f0 __slab_alloc+0x1c/0x30 kmem_cache_alloc+0x20e/0x220 xas_nomem+0x28/0x70 add_to_swap_cache+0x321/0x400 __read_swap_cache_async+0x105/0x240 swap_cluster_readahead+0x22c/0x2e0 shmem_swapin+0x8e/0xc0 shmem_swapin_page+0x196/0x740 shmem_getpage_gfp+0x3a2/0xa60 shmem_read_mapping_page_gfp+0x32/0x60 shmem_get_pages+0x155/0x5e0 [i915] __i915_gem_object_get_pages+0x68/0xa0 [i915] i915_vma_pin+0x3fe/0x6c0 [i915] eb_add_vma+0x10b/0x2c0 [i915] i915_gem_do_execbuffer+0x704/0x3430 [i915] i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915] drm_ioctl_kernel+0x86/0xd0 [drm] drm_ioctl+0x206/0x390 [drm] ksys_ioctl+0x82/0xc0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x5b/0xf0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported on 5.7, but it goes back really to 3.1: when shmem_read_mapping_page_gfp() was implemented for use by i915, and allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but missed swapin's "& GFP_KERNEL" mask for page tree node allocation in __read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits from what page cache uses, but GFP_RECLAIM_MASK is now what's needed. Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085 Link: http://lkml.kernel.org/r/alpine.LSU.2.11.2006151330070.11064@eggly.anvils Fixes: 68da9f05 ("tmpfs: pass gfp to shmem_getpage_gfp") Signed-off-by:
Hugh Dickins <hughd@google.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Reviewed-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by:
Chris Murphy <lists@colorremedies.com> Analyzed-by:
-
Filipe Manana authored
[ Upstream commit 9fecd132 ] When removing a block group, if we fail to delete the block group's item from the extent tree, we jump to the 'out' label and end up decrementing the block group's reference count once only (by 1), resulting in a counter leak because the block group at that point was already removed from the block group cache rbtree - so we have to decrement the reference count twice, once for the rbtree and once for our lookup at the start of the function. There is a second bug where if removing the free space tree entries (the call to remove_block_group_free_space()) fails we end up jumping to the 'out_put_group' label but end up decrementing the reference count only once, when we should have done it twice, since we have already removed the block group from the block group cache rbtree. This happens because the reference count decrement for the rbtree reference happens after attempting to remove the free space tree entries, which is far away from the place where we remove the block group from the rbtree. To make things less error prone, decrement the reference count for the rbtree immediately after removing the block group from it. This also eleminates the need for two different exit labels on error, renaming 'out_put_label' to just 'out' and removing the old 'out'. Fixes: f6033c5e ("btrfs: fix block group leak when removing fails") CC: stable@vger.kernel.org # 4.4+ Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Reviewed-by:
Anand Jain <anand.jain@oracle.com> Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
- 01 Jul, 2020 8 commits
-
-
Sasha Levin authored
Signed-off-by: -
Greg Kroah-Hartman authored
commit cf9c9445 upstream. This reverts commit e2bd1dcb. In discussion on the mailing list, it has been determined that this is not the correct type of fix for this issue. Revert it so that we can do this correctly. Reported-by:
Jiri Slaby <jslaby@suse.cz> Reported-by:
-
Zheng Bin authored
[ Upstream commit d0c7feaf ] We recently used fuzz(hydra) to test XFS and automatically generate tmp.img(XFS v5 format, but some metadata is wrong) xfs_repair information(just one AG): agf_freeblks 0, counted 3224 in ag 0 agf_longest 536874136, counted 3224 in ag 0 sb_fdblocks 613, counted 3228 Test as follows: mount tmp.img tmpdir cp file1M tmpdir sync In 4.19-stable, sync will stuck, the reason is: xfs_mountfs xfs_check_summary_counts if ((!xfs_sb_version_haslazysbcount(&mp->m_sb) || XFS_LAST_UNMOUNT_WAS_CLEAN(mp)) && !xfs_fs_has_sickness(mp, XFS_SICK_FS_COUNTERS)) return 0; -->just return, incore sb_fdblocks still be 613 xfs_initialize_perag_data cp file1M tmpdir -->ok(write file to pagecache) sync -->stuck(write pagecache to disk) xfs_map_blocks xfs_iomap_write_allocate while (count_fsb != 0) { nimaps = 0; while (nimaps == 0) { --> endless loop nimaps = 1; xfs_bmapi_write(..., &nimaps) --> nimaps becomes 0 again xfs_bmapi_write xfs_bmap_alloc xfs_bmap_btalloc xfs_alloc_vextent xfs_alloc_fix_freelist xfs_alloc_space_available -->fail(agf_freeblks is 0) In linux-next, sync not stuck, cause commit c2b31643 ("xfs: use the latest extent at writeback delalloc conversion time") remove the above while, dmesg is as follows: [ 55.250114] XFS (loop0): page discard on page ffffea0008bc7380, inode 0x1b0c, offset 0. Users do not know why this page is discard, the better soultion is: 1. Like xfs_repair, make sure sb_fdblocks is equal to counted (xfs_initialize_perag_data did this, who is not called at this mount) 2. Add agf verify, if fail, will tell users to repair This patch use the second soultion. Signed-off-by:
Zheng Bin <zhengbin13@huawei.com> Signed-off-by:
Ren Xudong <renxudong1@huawei.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by:
-
Mikulas Patocka authored
commit d35bd764 upstream. Add cond_resched() to a loop that fills in the mapper memory area because the loop can be executed many times. Fixes: 48debafe ("dm: add writecache target") Cc: stable@vger.kernel.org Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Huaisheng Ye authored
commit 39495b12 upstream. When uncommitted entry has been discarded, correct wc->uncommitted_block for getting the exact number. Fixes: 48debafe ("dm: add writecache target") Cc: stable@vger.kernel.org Signed-off-by:
Huaisheng Ye <yehs1@lenovo.com> Acked-by:
-
Olga Kornievskaia authored
commit d03727b2 upstream. Figuring out the root case for the REMOVE/CLOSE race and suggesting the solution was done by Neil Brown. Currently what happens is that direct IO calls hold a reference on the open context which is decremented as an asynchronous task in the nfs_direct_complete(). Before reference is decremented, control is returned to the application which is free to close the file. When close is being processed, it decrements its reference on the open_context but since directIO still holds one, it doesn't sent a close on the wire. It returns control to the application which is free to do other operations. For instance, it can delete a file. Direct IO is finally releasing its reference and triggering an asynchronous close. Which races with the REMOVE. On the server, REMOVE can be processed before the CLOSE, failing the REMOVE with EACCES as the file is still opened. Signed-off-by:
Olga Kornievskaia <kolga@netapp.com> Suggested-by:
Neil Brown <neilb@suse.com> CC: stable@vger.kernel.org Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Trond Myklebust authored
commit 8b040137 upstream. If the mirror count changes in the new layout we pick up inside ff_layout_pg_init_write(), then we can end up adding the request to the wrong mirror and corrupting the mirror->pg_list. Fixes: d600ad1f ("NFS41: pop some layoutget errors to application") Cc: stable@vger.kernel.org Signed-off-by:
Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by:
-
Chuck Lever authored
commit 89a3c9f5 upstream. @subbuf is an output parameter of xdr_buf_subsegment(). A survey of call sites shows that @subbuf is always uninitialized before xdr_buf_segment() is invoked by callers. There are some execution paths through xdr_buf_subsegment() that do not set all of the fields in @subbuf, leaving some pointer fields containing garbage addresses. Subsequent processing of that buffer then results in a page fault. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
