Merge tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX arm64 device tree changes for 5.3:
 - Add i.MX8MQ based Librem5 devkit support.
 - Add SNVS power key support for i.MX8MQ and i.MX8MM.
 - Add GPIO alias for imx8mq and i.MX8QXP.
 - A series from Daniel Baluta to add SAI devices and enable audio
   support for imx8mm-evk board.
 - Add DDR performance monitor unit support for i.MX8QXP.
 - Add irqsteer interrupt controller device for i.MX8MQ SoC.
 - Add CPU speed grading and all OPPs for i.MX8MM and i.MX8MQ.
 - Add OCOTP device node for i.MX8QXP.
 - Various device addition for LS1028A: SATA, qDMA, USB, Mali DP500 and
   temperature sensor.
 - Random minor coding style improvements.

* tag 'imx-dt64-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (32 commits)
  arm64: dts: librem5: enable the SNVS power key
  arm64: dts: librem5: Limit the USB to 5V
  arm64: dts: imx8qxp: added ddr performance monitor nodes
  arm64: dts: imx8qxp: sort LSIO subsystem devices
  arm64: dts: imx8qxp: sort alias alphabetically
  arm64: dts: imx8qxp: Add lsio_mu13 node
  arm64: dts: imx8mm-evk: Enable audio codec wm8524
  arm64: dts: fsl: librem5: Add a device tree for the Librem5 devkit
  arm64: dts: fsl: ls1028a: Add qDMA node
  arm64: dts: imx8mm: Enable SNVS power key according to board design
  arm64: dts: imx8mq-evk: Enable SNVS power key
  arm64: dts: ls1028a: add crypto node
  arm64: dts: ls1028a: Add temperature sensor node
  arm64: dts: imx8mm: Move gic node into soc node
  arm64: dts: imx8mm: Move usbphy out of soc node
  arm64: dts: imx8mm: Pass the 'ranges' property
  arm64: dts: imx8mm: Pass a unit name for the 'soc' node
  arm64: dts: fsl: imx8mq: add the snvs power key node
  arm64: dts: ls1028a: fix watchdog device node
  arm64: dts: ls1028a: Enable sata.
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

i.MX arm32 DT changes for 5.3:
 - New board support: iMX6-based Kontron SMARC-sAMX6i, i.MX7D based
   Meerkat96 board, and NXP LS1021A-TSN board.
 - A series from Andrey Smirnov to update vf610-zii-dev and
   imx7d-zii-rpu2 board, fixing UART2 pin assignment and stdout-path,
   adding QSPI device, and dropping unused pinmux.
 - Update imx6sl and imx6qdl device tree to assign corresponding clocks
   instead of dummy clock.
 - Update i.MX6/7 boards from NXP to assign corresponding power supply
   for LDOs.
 - Update i.MX6/7 device trees to enable SNVS poweroff key support
   according to board design.
 - Update coresight DT binding for i.MX7 according to consolidations
   for CoreSight replicator and funnel.
 - A series from Marek Vasut to update M53Menlo board on various devices
   like UART, USB, ethernet PHY, GPIOs etc.
 - Enable USBOTG support for imx7ulp and evk board.
 - A series from Peter Robinson to update imx6sx-udoo board, switching
   to SPDX License Identifier, enabling I2C devices and bluetooth
   support.
 - Add video capture support for i.MX53 and imx53-smd board.
 - Add PXP device for i.MX6UL.
 - Other random small updates on various boards.

* tag 'imx-dt-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (46 commits)
  ARM: dts: imx7ulp-evk: enable USBOTG1 support
  ARM: dts: imx7ulp: add imx7ulp USBOTG1 support
  ARM: dts: imx6qdl-kontron-samx6i: add Kontron SMARC SoM Support
  ARM: dts: imx6qdl-kontron-samx6i: Add iMX6-based Kontron SMARC-sAMX6i module
  ARM: dts: imx7d-zii-rpu2: Drop unused pinmux entries
  ARM: dts: imx7d-zii-rpu2: Fix incorrrect 'stdout-path'
  ARM: dts: Add support for 96Boards Meerkat96 board
  ARM: dts: imx6ul: Add PXP node
  ARM: dts: imx6sll: Enable SNVS poweroff according to board design
  ARM: dts: imx7s: Enable SNVS power key according to board design
  ARM: dts: imx6sll: Enable SNVS power key according to board design
  ARM: dts: imx6ul: Enable SNVS power key according to board design
  ARM: dts: imx6sx: Enable SNVS power key according to board design
  ARM: dts: imx6qdl: Enable SNVS power key according to board design
  ARM: dts: imx53: Bind CPLD on M53Menlo
  ARM: dts: Introduce the NXP LS1021A-TSN board
  ARM: dts: imx6ull-colibri: enable UHS-I for USDHC1
  ARM: dts: imx7d: Update cpufreq OPP table
  ARM: dts: imx6sx-udoo-neo: add bluetooth config to uart3
  ARM: dts: imx6sx-udoo-neo: enable i2c-2 and i2c-4 for onboard sensors
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT changes with new clock for 5.3:
 - This is a set of device tree changes with new clocks - adding
   clock info for i.MX8 GPIO and SNVS RTC device.

* tag 'imx-dt-clkdep-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: imx8mq: add clock for SNVS RTC node
  arm64: dts: imx8mm: add clock for SNVS RTC node
  arm64: dts: imx8mm: add clock for GPIO node
  clk: imx8m: Add GIC clock
  dt-bindings: clock: imx8m: Add GIC clock
  clk: imx8mm: add SNVS clock to clock tree
  dt-bindings: clock: imx8mm: Add SNVS clock
  clk: imx8mq: add SNVS clock to clock tree
  dt-bindings: clock: imx8mq: Add SNVS clock
  clk: imx8mm: add GPIO clocks to clock tree
  dt-bindings: clock: imx8mm: Add GPIO clocks
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'imx-bindings-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt

i.MX DT bindings for 5.3:
 - Add vendor prefix for Purism SPC.
 - Add bindings for i.MX8MQ EVK Board, Purism Librem5 devkit and i.MX7
   Meerkat96 Board.
 - Add LS1028A specific compatible into qDMA bindings doc.
 - Move Emtrion i.MX6 board bindings to schema.
 - Add missing schemas for i.MX7ULP and i.MX1/31/35 bindings.

* tag 'imx-bindings-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  dt-bindings: arm: fsl: Add missing schemas for i.MX1/31/35
  dt-bindings: arm: fsl: Add back missing i.MX7ULP binding
  dt-bindings: arm: Move Emtrion i.MX6 board bindings to schema
  dt-bindings: arm: fsl: Add the imx8mq boards
  dt-bindings: Add an entry for Purism SPC
  dt-bindings: fsl-qdma: Add LS1028A qDMA bindings
  dt-bindings: arm: Document 96Boards Meerkat96 devicetree binding
Signed-off-by: Olof Johansson <olof@lixom.net>

This is the pxa devicetree changes for 5.3 cycle :
 - devicetree pinmux support for bias on pxa3xx
 - devicetree pinmux bias usage for raumfeld

* tag 'pxa-dt-5.3' of https://github.com/rjarzmik/linux:
  ARM: dts: pxa300-raumfeld-speaker-one: add channel output mapping for STA320
  ARM: pxa: raumfeld-common: fix comments in gpio_keys pinctrl node
  ARM: pxa: raumfeld-controller: add pinctrl for charger pins
  ARM: pxa: raumfeld-controller: fix 'dock detect' GPIO key
  ARM: pxa3xx: dts: Add defines for pinctrl-single,bias-pull{up,down}
Signed-off-by: Olof Johansson <olof@lixom.net>

AT91 DT for 5.3

 - switch to new sckc bindings
 - convert soc bindings to json-schema

* tag 'at91-5.3-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
  dt-bindings: arm: Convert Atmel board/soc bindings to json-schema
  ARM: dts: at91: sama5d3: switch to new sckc bindings
  ARM: dts: at91: at91sam9rl: switch to new sckc bindings
  ARM: dts: at91: at91sam9g45: switch to new sckc bindings
  ARM: dts: at91: at91sam9x5: switch to new sckc bindings
  ARM: dts: at91sam9261ek: remove unused chosen nodes
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt

arm64: tegra: Device tree changes for v5.3-rc1

This contains the bulk of the Tegra changes this cycle. It has a bunch
of improvements across almost all boards. These are mostly small and not
too exciting additions.

Most notably perhaps is the continuation of Jetson Nano support, which
is now mostly on feature parity with Jetson TX1.

* tag 'tegra-for-5.3-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (28 commits)
  arm64: tegra: Enable PCIe slots in P2972-0000 board
  arm64: tegra: Add P2U and PCIe controller nodes to Tegra194 DT
  arm64: tegra: Add PEX DPD states as pinctrl properties
  arm64: tegra: Enable ACONNECT, ADMA and AGIC
  arm64: tegra: Add ACONNECT, ADMA and AGIC nodes
  arm64: tegra: Sort device tree nodes alphabetically
  arm64: tegra: Fix Jetson Nano GPU regulator
  arm64: tegra: Update Jetson TX1 GPU regulator timings
  arm64: tegra: Fix AGIC register range
  arm64: tegra: Add INA3221 channel info for Jetson TX2
  arm64: tegra: Enable PWM on Jetson Nano
  arm64: tegra: Enable CPU sleep on Jetson Nano
  arm64: tegra: Add ID EEPROMs on Jetson Nano
  arm64: tegra: Add ID EEPROM for Jetson TX2 Developer Kit
  arm64: tegra: Add ID EEPROM for Jetson TX2 module
  arm64: tegra: Add ID EEPROM for Jetson TX1 Developer Kit
  arm64: tegra: Add ID EEPROM for Jetson TX1 module
  arm64: tegra: Don't use architected timer for suspend on Tegra210
  arm64: tegra: Mark architected timer as always on
  arm64: tegra: Add pin control states for I2C on Tegra186
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.3, round 1

Highlights:
----------

MPU part:
 -Add stm32mp157a-avenger board support:
  This board embeds a STM32MP157a SOC with AC package (TFBGA361, 148 ios)
  , 1024MB of DDR3 and STPMIC1A pmic . Several connections are available on this boards:
  2x Type A (USB 2.0) Host and 1x Micro B (USB 2.0) OTG, ethernet
  10/100/1000, WiFi 5 GHz & 2.4GHz, ...
 -Add STMFX support en stm32mp157c-ev1 and enable joystick connected on
  it.
 -Add I2S and SAI support on stm32mp157c.
 -Add and enable support of Vivante GPU on stm32mp157 ED1 and DK1 boards
  (EV1 and DK2 inherit of it).
 -Add camera support:
  -Add DCMI support on stm32mp157c SOC
  -Enabled OV5640 camera support on stm32mp157c-ev1 board
 -Enable hdmi bridge sii9022 & display controller on stm32mp157c-dk1
  board.

MCU part:
 -Add STMFX support en stm32746g-eval and enable connections on it:
  leds and joystick

* tag 'stm32-dt-for-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (27 commits)
  ARM: dts: stm32: replace rgmii mode with rgmii-id on stm32mp15 boards
  ARM: dts: stm32: Add Avenger96 devicetree support based on STM32MP157A
  dt-bindings: arm: stm32: Document Avenger96 devicetree binding
  dt-bindings: arm: stm32: Convert STM32 SoC bindings to DT schema
  ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157
  ARM: dts: stm32: add sai id registers to stm32mp157c
  ARM: dts: stm32: add power supply of rm68200 on stm32mp157c-ev1
  ARM: dts: stm32: enable display on stm32mp157c-dk1 board
  ARM: dts: stm32: Add I2C 1 config for stm32mp157a-dk1
  ARM: dts: stm32: enable OV5640 camera on stm32mp157c-ev1 board
  ARM: dts: stm32: add DCMI pins to stm32mp157c
  ARM: dts: stm32: add DCMI camera interface support on stm32mp157c
  ARM: dts: stm32: enable Vivante GPU support on stm32mp157a-dk1 board
  ARM: dts: stm32: enable Vivante GPU support on stm32mp157c-ed1 board
  ARM: dts: stm32: Add Vivante GPU support on STM32MP157c
  ARM: dts: stm32: add i2s pins muxing on stm32mp157
  ARM: dts: stm32: add i2s support on stm32mp157c
  ARM: dts: stm32: add sai pins muxing on stm32mp157
  ARM: dts: stm32: add sai support on stm32mp157c
  ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt64 for 5.3 (part 1)

For Armada 7K/8K:
 - enable AP806 thermal throttling with CPUfreq
 - add missing #interrupt-cells property allowing configuring
   interrupt for GPIO

On Armada 8040 based board:
- Fix PCI memory window on Mcbin board
- Set SFP power limit on clearfog GT board
- Disable AP I2C on Armada-8040-DB

On Armada 3720 based board espressobin correct the SPI node used for
NOR flash

On Armada 7040 DB board add USB current regulators

* tag 'mvebu-dt64-5.3-1' of git://git.infradead.org/linux-mvebu:
  arm64: dts: marvell: add missing #interrupt-cells property
  arm64: dts: marvell: armada-7040-db: Add USB current regulators
  arm64: dts: armada-3720-espressobin: correct spi node
  arm64: dts: marvell: Disable AP I2C on Armada-8040-DB
  arm64: dts: marvell: Enable AP806 thermal throttling with CPUfreq
  arm64: dts: marvell: Change core numbering in AP806 thermal-node
  arm64: dts: marvell: clearfog-gt-8k: set SFP power limit
  arm64: dts: marvell: mcbin: enlarge PCI memory window
Signed-off-by: Olof Johansson <olof@lixom.net>

mvebu dt for 5.3 (part 1)

Add LCD support on Netgear RN104

* tag 'mvebu-dt-5.3-1' of git://git.infradead.org/linux-mvebu:
  ARM: dts: armada: netgear-rn104: Add LCD to RN104 dts.
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM64 Based SoC DT Updates for v5.3

* Renesas SoCs
  - Revise usb2_phy nodes and phys properties according to updated bindings
  - Use ip=on for bootargs

* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
  - Add dynamic power coefficient
  - Create thermal zone to support IPA

* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
  - Point LVDS0 to its companion LVDS1

* R-Car E3 (r8a77990) SoC
  - Corresct register range of DU

* R-Car E3 (r8a77990) based Ebisu board
  - Remove renesas, no-ether-link property

* R-Car D3 (r8a77995) based Draak board:
  - Remove unnecessary index from vin4 port

* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
  - Initial support
  - Describe CPU capacity and topoligy
  - Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0

* RZ/G2E (r8a774c0) SoC based EK874 board:
  - Clean up CPU compatible strings
  - Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN

* tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (53 commits)
  arm64: dts: renesas: hihope-common: Remove "label" from LEDs
  arm64: dts: renesas: hihope-common: Add HDMI support
  arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
  arm64: dts: renesas: r8a774a1: Add dynamic power coefficient
  arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA
  arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz
  arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC
  arm64: dts: renesas: hihope-common: Add LEDs support
  arm64: dts: renesas: hihope-common: Enable USB3.0
  arm64: dts: renesas: hihope-common: Add USB 2.0 support
  arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
  arm64: dts: renesas: r8a774a1: Add TMU device nodes
  arm64: dts: renesas: r8a774a1: Add CMT device nodes
  arm64: dts: renesas: hihope-common: Add uSD and eMMC
  arm64: dts: renesas: r8a77990: Fix register range of display node
  arm64: dts: renesas: cat874: Enable usb role switch support
  arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node
  arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1
  arm64: dts: renesas: hihope-common: Add RWDT support
  arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Updates for v5.3

* Renesas SoC based boards
  - Use ip=on for bootargs

* Renesas R-Car Gen 2 SOC based boards
  - Configure PMIC IRQ pinmux

* R-Car V2H (r8a7792) SoC
  - Describe CMT devices in DT

* RZ/G1C (r8a77470) based iWave SBC (iwg23s-sbc) and
  RZ/G1N (r8a7744) based boards:
  - Correct SDHI2 VccQ regulator to fix SDR50 mode

* RZ/A2M (r7s9210) based rza2mevb EVB
  RZ/A1H (r7s72100) based rskrza1 board
  - Describe input switch in DT

* RZ/A2M (r7s9210) based rza2mevb EVB
  - Sort nodes to ease future maintenance
  - Add USB host, Ethernet and SDHI support

* RZ/A2M (r7s9210) and RZ/A1H (r7s72100) SoCs
  - Describe IRQC device in DT

* tag 'renesas-arm-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
  ARM: dts: r8a7792: Add CMT0 and CMT1 to r8a7792
  ARM: dts: iwg23s-sbc: Fix SDHI2 VccQ regulator
  ARM: dts: iwg20d-q7-common: Fix SDHI1 VccQ regularor
  ARM: dts: rza2mevb: Add input switch
  ARM: dts: r7s9210: Add IRQC device node
  ARM: dts: rza2mevb: sort nodes of rza2mevb board
  ARM: dts: renesas: Use ip=on for bootargs
  ARM: dts: rza2mevb: Add USB Host support
  ARM: dts: r7s9210: Add USB Device support
  ARM: dts: r7s9210: Add USB Host support
  ARM: dts: rskrza1: Add input switches
  ARM: dts: r7s72100: Add IRQC device node
  ARM: dts: r8a779x: Configure PMIC IRQ pinmux
  ARM: dts: rza2mevb: Add 48MHz USB clock
  ARM: dts: r7s9210: Add USB clock
  ARM: dts: rza2mevb: add ethernet aliases
  ARM: dts: rza2mevb: Add SDHI support
  ARM: dts: rza2mevb: Add Ethernet support
  ARM: dts: r7s9210: Add SDHI support
  ARM: dts: r7s9210: Add RIIC support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-dt-bindings-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM Based SoC DT Bindings Updates for v5.3

* Renesas Gen3 DWC HDMI TX Encoder
  - Add RZ/G2M (r8a774a1) support

* Renesas R-Car Compare Match Timer (CMT)
 - Add R-Car H3 (r8a7795), M3-N (r8a77965) and E3 (r8a77990) support

* Renesas R-Car CAN FD Controller
  - Add R-Car M3-N (r8a77965) and E3 (r8a77990), and RZ/G2E (r8a774c0) support

* Renesas R-Car CAN Controller
  - Add RZ/G2M (r8a774a1) support
  - Correct RZ/G2 clocks

* Vendor prefixes: Add vendor prefix for HopeRun

* Renesas SoCs and boards: Add HopeRun RZ/G2[M] boards

* tag 'renesas-dt-bindings-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  dt-bindings: display: renesas: Add r8a774a1 support
  dt-bindings: timer: renesas, cmt: Document r8a779{5|65|90} CMT support
  dt-bindings: can: rcar_canfd: document r8a774c0 support
  dt-bindings: can: rcar_canfd: document r8a77990 support
  dt-bindings: can: rcar_canfd: document r8a77965 support
  dt-bindings: can: rcar_can: Add r8a774c0 support
  dt-bindings: can: rcar_can: Fix RZ/G2 CAN clocks
  dt-bindings: Add vendor prefix for HopeRun
  dt-bindings: arm: renesas: Add HopeRun RZ/G2[M] boards
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

This time we only have a single patch for our command branch between
arm and arm64, a fix for the array syntax raised by our DT schemas.

* tag 'sunxi-h3-h5-for-5.3-201906210812' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  ARM: dts: sunxi: h3/h5: Fix GPIO regulator state array
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of arm64 DT changes, this time with:
  - Some fixes for the DT schemas that were added during this release
  - Wifi support for the H6
  - LRADC suppport for the A64
  - Some background work on A64 boards, to enable various devices such
    as touchscreens, PMIC, audio, wifi, etc.

* tag 'sunxi-dt64-for-5.3-201906210808' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  arm64: dts: allwinner: h6: Add DMA node
  arm64: dts: allwinner: a64: Add lradc node
  dt-bindings: input: sun4i-lradc-keys: Add A64 compatible
  arm64: dts: allwinner: h6: add r_watchog node
  arm64: dts: allwinner: h6: add watchdog node
  dt-bindings: watchdog: add Allwinner H6 watchdog
  arm64: dts: allwinner: a64: Enable audio on Teres-I
  arm64: dts: allwinner: a64: bananapi-m64: Enable PMIC USB power supply
  arm64: dts: allwinner: axp803: add USB power supply node
  arm64: dts: allwinner: a64: Add pinmux for RGB666 LCD
  arm64: dts: allwinner: a64: orangepi-win: Add wifi and bluetooth nodes
  arm64: dts: allwinner: h6: add PIO VCC bank supplies for Pine H64
  arm64: dts: allwinner: a64-oceanic-5205-5inmfd: Enable GT911 CTP
  arm64: dts: allwinner: a64-amarula-relic: Add GT5663 CTP node
  arm64: dts: allwinner: a64: move I2C pinctrl to dtsi
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt

Our usual bunch of patches:
  - Some work on the BPi M2-Berry to support various devices
  - Convert some bindings to a schema, and a lot of fixes reported by
    the schemas we introduced.
  - A few other fixes here and there

* tag 'sunxi-dt-for-5.3-201906210807' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
  dt-bindings: pwm: Convert Allwinner PWM to a schema
  ARM: dts: sun8i: r40: Change the RTC compatible
  ARM: dts: sun8i: v3s: Add external crystals accuracy
  ARM: dts: sun8i: v3s: Fix the RTC node
  ARM: dts: sun6i: Add external crystals accuracy
  ARM: dts: sun6i: Fix RTC node
  ARM: dts: sun8i: a83t: Add device node for CSI (Camera Sensor Interface)
  ARM: dts: gr8-evb: Fix RTC vendor
  ARM: dts: sun7i: icnova-swac: Fix the model vendor
  ARM: dts: sun8i: a711: Change LRADC node names to avoid warnings
  ARM: dts: sun7i: olimex-lime2: Enable ac and power supplies
  ARM: dts: sun6i: Add default address and size cells for SPI
  ARM: dts: sun8i-h3: Fix wifi in Beelink X2 DT
  dt-bindings: bus: Convert Allwinner RSB to a schema
  ARM: dts: sun8i: r40: bananapi-m2-ultra: Remove regulator-always-on
  ARM: dts: sun8i: v40: bananapi-m2-berry: Add Bluetooth device node
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable AHCI
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable HDMI output
  ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller
  ARM: dts: sun8i: v40: bananapi-m2-berry: Add GPIO pin-bank regulator supplies
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/dt

ARM: dts: Amlogic updates for v5.3
- SPDX updates
- switch to generic ethernet PHY reset bindings
- add the canvas module
- mxiii-plus board: add regulators

* tag 'amlogic-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
  ARM: dts: meson: switch to the generic Ethernet PHY reset bindings
  ARM: dts: meson8b: update with SPDX Licence identifier
  ARM: dts: meson8b-odroidc1: update with SPDX Licence identifier
  ARM: dts: meson8b-mxq: update with SPDX Licence identifier
  ARM: dts: meson8: update with SPDX Licence identifier
  ARM: dts: meson8-minix-neo-x8: update with SPDX Licence identifier
  ARM: dts: meson6: update with SPDX Licence identifier
  ARM: dts: meson6-atv1200: update with SPDX Licence identifier
  ARM: dts: meson: update with SPDX Licence identifier
  ARM: dts: meson8b: mxq: improve support for the TRONFY MXQ S805
  ARM: dts: meson8m2: mxiii-plus: add the supply for the Mali GPU
  ARM: dts: meson8m2: mxiii-plus: rename the DCDC2 regulator
  ARM: dts: meson8b: add the canvas module
  ARM: dts: meson8m2: update the offset of the canvas module
  ARM: dts: meson8: add the canvas module
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into arm/dt

This pull request adds CPUFreq support for DA850 boards in device-tree
boot using the generic CPUFREQ_DT driver.

* tag 'davinci-for-v5.3/dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
  ARM: davinci_all_defconfig: Enable CPUFREQ_DT
  ARM: dts: da850-evm: enable cpufreq
  ARM: dts: da850-lcdk: enable cpufreq
  ARM: dts: da850-lego-ev3: enable cpufreq
  ARM: dts: da850: add cpu node and operating points to DT
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed into arm/dt

ASPEED device tree updates for 5.3

We have various device tree updates from the OpenBMC project to enable
bits and pieces in existing systems, notably updates to Google's Zaius.

There are some AST2500 machines under development:

  * Lenovo Hr630
  * IBM Swift
  * Facebook YAMP

And some AST2400 machines that have been around but out of tree and have
now joined the party:

  * YADRO VESNIN
  * Microsoft Olympus

* tag 'aspeed-5.3-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/aspeed:
  ARM: dts: aspeed: Enable video engine on romulus and wtherspoon
  ARM: dts: aspeed: Add Inspur fp5280g2 BMC machine
  ARM: dts: aspeed: Add YADRO VESNIN BMC
  ARM: dts: aspeed: Add Microsoft Olympus BMC
  ARM: dts: aspeed: Adding Lenovo Hr630 BMC
  ARM: dts: aspeed: Add Facebook YAMP BMC
  ARM: dts: aspeed: swift: Add pca9539 devices
  ARM: dts: aspeed: Add Swift BMC machine
  ARM: dts: aspeed: cmm: enable ehci host controllers
  ARM: dts: aspeed: zaius: fixed I2C bus numbers for pcie slots
  ARM: dts: aspeed: zaius: update 12V brick I2C address
  ARM: dts: aspeed: zaius: add Infineon and Intersil regulators
  ARM: dts: aspeed: quanta-q71: Enable p2a node
  ARM: dts: aspeed: Add aspeed-p2a-ctrl node
  ARM: dts: aspeed: Add Power9 and Power9 CFAM description
  ARM: dts: aspeed: Rename flash-controller nodes
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm Device Tree Changes for v5.3

* Add display support to MSM8974
* Add display, backlight, and touchscreen support to MSM8974 Hammerhead
* Update coresight bindings for MSM8974 and APQ8064

* tag 'qcom-dts-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  ARM: dts: qcom: msm8974-hammerhead: add support for display
  ARM: dts: msm8974: add display support
  ARM: dts: qcom: msm8974-hammerhead: add support for backlight
  ARM: dts: qcom: msm8974-hammerhead: add touchscreen support
  ARM: dts: qcom-msm8974: Update coresight DT bindings
  ARM: dts: qcom-apq8064: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt

Qualcomm ARM64 Updates for v5.3

* Switch to use second gen PON on PM8998
* Add PSCI cupidle states for MSM8996, MSM8998,and SDM845
* Add MSM8996 UFS phy reset controller
* Add propre cpu capacity scaling on MSM8996
* Fixups for APR domain, legacy clocks, and PSCI entry latency on MSM8996
* Enable SMMUs on MSM8996
* Add Dragonboard 845C
* Add Q6V5, GPU, GMU, and AOSS QMP node on SDM845
* Fixup CPU topology on SDM845
* Change USB1 to be peripheral on SDM845 MTP
* Add PCIe Phy, RC nodes, ANOC1 SMMU, and RPMPD node on MSM8998
* Update coresight bindings for MSM8916
* Update idle state names and entry-method on MSM8916
* Add PCIe, RPMPD, LPASS, Q6, TCSR, TuringCC, PSCI cpuidle states,
  and CDSP on QCS404
* Add reset-cells property to QCS404 GCC node
* Fixup s3 max voltage, l3 min voltage, drive strength typo, and
  s3 supply definition on QCS404-evb
* Fixup ADC outputs and VADC calibration on PMS405

* tag 'qcom-arm64-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits)
  arm64: dts: qcom: qcs404-evb: fix vdd_apc supply
  arm64: dts: qcom: pm8998: Use qcom,pm8998-pon binding for second gen pon
  arm64: dts: qcom: msm8996: Enable SMMUs
  arm64: dts: qcom: msm8996: Correct apr-domain property
  arm64: dts: qcom: Add Dragonboard 845c
  arm64: dts: qcom: qcs404-evb: Enable PCIe
  arm64: dts: qcom: qcs404: Add PCIe related nodes
  arm64: dts: qcom: msm8998: Add PCIe PHY and RC nodes
  arm64: dts: qcom: msm8998: Add ANOC1 SMMU node
  arm64: dts: qcom: msm8996: Stop using legacy clock names
  arm64: dts: msm8996: fix PSCI entry-latency-us
  arm64: dts: qcom: msm8998: Add PSCI cpuidle low power states
  arm64: dts: qcom: sdm845: Add Q6V5 MSS node
  arm64: dts: qcom: Add AOSS QMP node
  arm64: dts: qcom-qcs404: Add reset-cells to GCC node
  arm64: dts: qcom-msm8916: Update coresight DT bindings
  arm64: dts: qcom: msm8998: Add rpmpd node
  arm64: dts: qcom: qcs404: Add rpmpd node
  arm64: dts: qcom: qcs404: Move lpass and q6 into soc
  arm64: dts: qcom: qcs404: Fully describe the CDSP
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM: DT: Hisilicon ARM32 SoCs updates for v5.3

- Updated CoreSight funnel and replicator using new bindings to fix warning
  for the hip04.

* tag 'hisi-arm32-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
  ARM: dts: hip04: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

ARM64: DT: Hisilicon SoCs DT updates for v5.3

* Hi3660 SoC and related boards:
  - Added CoreSight trace components

* Hi6220 SoC and related boards:
  - Updated CoreSight funnel and replicator using new bindings to fix warning

* tag 'hisi-arm64-dt-for-5.3' of git://github.com/hisilicon/linux-hisi:
  arm64: dts: hi3660: Add CoreSight support
  arm64: dts: hi6220: Update coresight DT bindings
Signed-off-by: Olof Johansson <olof@lixom.net>

This pull request contain Broadcom ARM-based SoCs Device Tree changes
for 5.3 please pull the following:

- Lukas enables DMA support for the BCM2835 (Raspberry Pi) SPI
  controller

- Florian fixes a number of dtc W=1 warnings in the Broadcom DTS files
  and provides a fix for devices failing to boot after the removal of
  skelton.dtsi (that commit has been submitted as a separate fix)

* tag 'arm-soc/for-5.3/devicetree-v2' of https://github.com/Broadcom/stblinux:
  ARM: dts: BCM5301X: Fix most DTC W=1 warnings
  ARM: dts: NSP: Fix the bulk of W=1 DTC warnings
  ARM: dts: BCM63xx: Fix DTC W=1 warnings
  ARM: dts: BCM53573: Fix DTC W=1 warnings
  ARM: dts: bcm-mobile: Fix most DTC W=1 warnings
  ARM: dts: Cygnus: Fix most DTC W=1 warnings
  ARM: dts: Fix BCM7445 DTC warnings
  ARM: bcm283x: Enable DMA support for SPI controller
  ARM: dts: bcm: Add missing device_type = "memory" property
Signed-off-by: Olof Johansson <olof@lixom.net>

Enable USBOTG1 support for evk board, it is dual-role function
port.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add imx7ulp USBOTG1 support.
Signed-off-by: Peter Chen <peter.chen@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The patch adds the following interfaces according the SMARC Spec 1.1
[1] and provided schematics:
 - SMARC SPI0/1
   Note: Since Kontron still uses silicon revisions below 1.3 they have
         add a spi-nor to implement Workaround #1 of erratum ERR006282.
 - SMARC SDIO
 - SMARC LCD
 - SMARC HDMI
 - SMARC Management pins
   Note: Kontron don't route all of these pins to the i.MX6, some are
         routed to the SoM CPLD.
 - SMARC GPIO
 - SMARC CSI Camera
   Note: As specified in [1] the data lanes are shared to cover the
         csi and the parallel case. The case depends on the baseboard so
         muxing the data lanes is not part of this patch.
 - SMARC I2S
 - SMARC Watchdog
   Note: The watchdog output pin is routed to the CPLD and the SMARC
         header. The CPLD performs a reset after a 30s timeout so we
         need to enable the watchdog per default.
 - SMARC module eeprom

Due to the lack of hardware not all of these interfaces are tesetd.

[1] https://sget.org/standards/smarcSigned-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

These settings are needed to make the hardware operable.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Careless oversight.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

The PEN2 line needs to be pulled up for the charger to enter high-current
mode. Do this with a static pull on the GPIO.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

The dock detection input key is active low. Also add a pinmux for it.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

This allows users of the pinctrl driver to specify either

  pinctrl-single,bias-pullup = MPF_PULL_UP;

or

  pinctrl-single,bias-pulldown = MPF_PULL_DOWN;

To activate the pull bits in the MFP registers.
Signed-off-by: Daniel Mack <daniel@zonque.org>
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>

Enable the snvs power key.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

The charge controller can handle 14V but the PTC on the devkit can only
handle 6V so limit the negotiated voltage to 5V.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Add ddr performance monitor
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

We prefer to sort device nodes under simple bus in order of unit
address.  Let's sort the devices under lsio_subsys properly.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

We prefer to sort alias entries alphabetically, so let's move serial0
to the right place.
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

lsio_mu13 node is used to communicate with DSP.
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

SMARC-sAMX6i is a SMARC (Smart Mobility Architecture) compliant
module.
Signed-off-by: Priit Laes <plaes@plaes.org>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

i.MX8MM has one wm8524 audio codec connected with
SAI3 digital audio interface.

This patch uses simple-card machine driver in order
to enable wm8524 codec.

We need to set:
	* SAI3 pinctrl configuration
	* codec reset gpio pinctrl configuration
	* clock hierarchy
	* codec node
	* simple-card configuration
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>