- 20 Dec, 2017 40 commits
-
-
Chandan Rajendra authored
commit 9d5afec6 upstream. On a ppc64 machine, when mounting a fuzzed ext2 image (generated by fsfuzzer) the following call trace is seen, VFS: brelse: Trying to free free buffer WARNING: CPU: 1 PID: 6913 at /root/repos/linux/fs/buffer.c:1165 .__brelse.part.6+0x24/0x40 .__brelse.part.6+0x20/0x40 (unreliable) .ext4_find_entry+0x384/0x4f0 .ext4_lookup+0x84/0x250 .lookup_slow+0xdc/0x230 .walk_component+0x268/0x400 .path_lookupat+0xec/0x2d0 .filename_lookup+0x9c/0x1d0 .vfs_statx+0x98/0x140 .SyS_newfstatat+0x48/0x80 system_call+0x58/0x6c This happens because the directory that ext4_find_entry() looks up has inode->i_size that is less than the block size of the filesystem. This causes 'nblocks' to have a value of zero. ext4_bread_batch() ends up not reading any of the directory file's blocks. This renders the entries in bh_use[] array to continue to have garbage data. buffer_uptodate() on bh_use[0] can then return a zero value upon which brelse() function is invoked. This commit fixes the bug by returning -ENOENT when the directory file has no associated blocks. Reported-by:
Abdul Haleem <abdhalee@linux.vnet.ibm.com> Signed-off-by:
Chandan Rajendra <chandan@linux.vnet.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Theodore Ts'o authored
commit 996fc447 upstream. It's possible for ext4_get_acl() to return an ERR_PTR. So we need to add a check for this case in __ext4_new_inode(). Otherwise on an error we can end up oops the kernel. This was getting triggered by xfstests generic/388, which is a test which exercises the shutdown code path. Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Eryu Guan authored
commit c894aa97 upstream. Currently, fallocate(2) with KEEP_SIZE followed by a fdatasync(2) then crash, we'll see wrong allocated block number (stat -c %b), the blocks allocated beyond EOF are all lost. fstests generic/468 exposes this bug. Commit 67a7d5f5 ("ext4: fix fdatasync(2) after extent manipulation operations") fixed all the other extent manipulation operation paths such as hole punch, zero range, collapse range etc., but forgot the fallocate case. So similarly, fix it by recording the correct journal tid in ext4 inode in fallocate(2) path, so that ext4_sync_file() will wait for the right tid to be committed on fdatasync(2). This addresses the test failure in xfstests test generic/468. Signed-off-by:
Eryu Guan <eguan@redhat.com> Signed-off-by:
-
Andi Kleen authored
commit fc82228a upstream. 407cd7fb (ext4: change fast symlink test to not rely on i_blocks) broke ~10 years old ext3 file systems created by 2.6.17. Any ELF executable fails because the /lib/ld-linux.so.2 fast symlink cannot be read anymore. The patch assumed fast symlinks were created in a specific way, but that's not true on these really old file systems. The new behavior is apparently needed only with the large EA inode feature. Revert to the old behavior if the large EA inode feature is not set. This makes my old VM boot again. Fixes: 407cd7fb (ext4: change fast symlink test to not rely on i_blocks) Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
Andreas Dilger <adilger@dilger.ca> Signed-off-by:
-
Kees Cook authored
commit 779f4e1c upstream. This reverts commit 04e35f44. SELinux runs with secureexec for all non-"noatsecure" domain transitions, which means lots of processes end up hitting the stack hard-limit change that was introduced in order to fix a race with prlimit(). That race fix will need to be redesigned. Reported-by:
Laura Abbott <labbott@redhat.com> Reported-by:
Tomáš Trnka <trnka@scm.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Adam Wallis authored
commit 6f6a23a2 upstream. Commit adfa543e ("dmatest: don't use set_freezable_with_signal()") introduced a bug (that is in fact documented by the patch commit text) that leaves behind a dangling pointer. Since the done_wait structure is allocated on the stack, future invocations to the DMATEST can produce undesirable results (e.g., corrupted spinlocks). Commit a9df21e3 ("dmaengine: dmatest: warn user when dma test times out") attempted to WARN the user that the stack was likely corrupted but did not fix the actual issue. This patch fixes the issue by pushing the wait queue and callback structs into the the thread structure. If a failure occurs due to time, dmaengine_terminate_all will force the callback to safely call wake_up_all() without possibility of using a freed pointer. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197605 Fixes: adfa543e ("dmatest: don't use set_freezable_with_signal()") Reviewed-by:
Sinan Kaya <okaya@codeaurora.org> Suggested-by:
Shunyong Yang <shunyong.yang@hxt-semitech.com> Signed-off-by:
Adam Wallis <awallis@codeaurora.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Thomas Gleixner authored
commit cef31d9a upstream. timer_create() specifies via sigevent->sigev_notify the signal delivery for the new timer. The valid modes are SIGEV_NONE, SIGEV_SIGNAL, SIGEV_THREAD and (SIGEV_SIGNAL | SIGEV_THREAD_ID). The sanity check in good_sigevent() is only checking the valid combination for the SIGEV_THREAD_ID bit, i.e. SIGEV_SIGNAL, but if SIGEV_THREAD_ID is not set it accepts any random value. This has no real effects on the posix timer and signal delivery code, but it affects show_timer() which handles the output of /proc/$PID/timers. That function uses a string array to pretty print sigev_notify. The access to that array has no bound checks, so random sigev_notify cause access beyond the array bounds. Add proper checks for the valid notify modes and remove the SIGEV_THREAD_ID masking from various code pathes as SIGEV_NONE can never be set in combination with SIGEV_THREAD_ID. Reported-by:
Eric Biggers <ebiggers3@gmail.com> Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by:
-
David Lechner authored
commit 7f6d2ecd upstream. Trying to read the MAC address from an eeprom that has an offset that is not a multiple of 4 causes an error currently. Fix it by changing the nvmem stride to 1. Signed-off-by:
David Lechner <david@lechnology.com> [Bartosz: tweaked the commit message] Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
-
Kirill A. Shutemov authored
commit 6d7e0ba2 upstream. If the machine does not support the paging mode for which the kernel was compiled, the boot process cannot continue. It's not possible to let the kernel detect the mismatch as it does not even reach the point where cpu features can be evaluted due to a triple fault in the KASLR setup. Instead of instantaneous silent reboot, emit an error message which gives the user the information why the boot fails. Fixes: 77ef56e4 ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y") Reported-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
-
Kirill A. Shutemov authored
commit 08529078 upstream. Prerequisite for fixing the current problem of instantaneous reboots when a 5-level paging kernel is booted on 4-level paging hardware. At the same time this change prepares the decompression code to boot-time switching between 4- and 5-level paging. [ tglx: Folded the GCC < 5 fix. ] Fixes: 77ef56e4 ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y") Signed-off-by:
-
Steve Wise authored
commit c058ecf6 upstream. Only insert our special drain CQEs to support ib_drain_sq/rq() after the wq is flushed. Otherwise, existing but not yet polled CQEs can be returned out of order to the user application. This can happen when the QP has exited RTS but not yet flushed the QP, which can happen during a normal close (vs abortive close). In addition never count the drain CQEs when determining how many CQEs need to be synthesized during the flush operation. This latter issue should never happen if the QP is properly flushed before inserting the drain CQE, but I wanted to avoid corrupting the CQ state. So we handle it and log a warning once. Fixes: 4fe7c296 ("iw_cxgb4: refactor sq/rq drain logic") Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com> Signed-off-by:
-
Trond Myklebust authored
commit 90d91b0c upstream. We must ensure that the call to rpc_sleep_on() in xprt_transmit() cannot race with the call to xprt_complete_rqst(). Reported-by:
Chuck Lever <chuck.lever@oracle.com> Link: https://bugzilla.linux-nfs.org/show_bug.cgi?id=317 Fixes: ce7c252a ("SUNRPC: Add a separate spinlock to protect..") Reviewed-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
monty_pavel@sina.com authored
commit 7e6358d2 upstream. A NULL pointer is seen if two concurrent "vgchange -ay -K <vg name>" processes race to load the dm-thin-pool module: PID: 25992 TASK: ffff883cd7d23500 CPU: 4 COMMAND: "vgchange" #0 [ffff883cd743d600] machine_kexec at ffffffff81038fa9 0000001 [ffff883cd743d660] crash_kexec at ffffffff810c5992 0000002 [ffff883cd743d730] oops_end at ffffffff81515c90 0000003 [ffff883cd743d760] no_context at ffffffff81049f1b 0000004 [ffff883cd743d7b0] __bad_area_nosemaphore at ffffffff8104a1a5 0000005 [ffff883cd743d800] bad_area at ffffffff8104a2ce 0000006 [ffff883cd743d830] __do_page_fault at ffffffff8104aa6f 0000007 [ffff883cd743d950] do_page_fault at ffffffff81517bae 0000008 [ffff883cd743d980] page_fault at ffffffff81514f95 [exception RIP: kmem_cache_alloc+108] RIP: ffffffff8116ef3c RSP: ffff883cd743da38 RFLAGS: 00010046 RAX: 0000000000000004 RBX: ffffffff81121b90 RCX: ffff881bf1e78cc0 RDX: 0000000000000000 RSI: 00000000000000d0 RDI: 0000000000000000 RBP: ffff883cd743da68 R8: ffff881bf1a4eb00 R9: 0000000080042000 R10: 0000000000002000 R11: 0000000000000000 R12: 00000000000000d0 R13: 0000000000000000 R14: 00000000000000d0 R15: 0000000000000246 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 0000009 [ffff883cd743da70] mempool_alloc_slab at ffffffff81121ba5 0000010 [ffff883cd743da80] mempool_create_node at ffffffff81122083 0000011 [ffff883cd743dad0] mempool_create at ffffffff811220f4 0000012 [ffff883cd743dae0] pool_ctr at ffffffffa08de049 [dm_thin_pool] 0000013 [ffff883cd743dbd0] dm_table_add_target at ffffffffa0005f2f [dm_mod] 0000014 [ffff883cd743dc30] table_load at ffffffffa0008ba9 [dm_mod] 0000015 [ffff883cd743dc90] ctl_ioctl at ffffffffa0009dc4 [dm_mod] The race results in a NULL pointer because: Process A (vgchange -ay -K): a. send DM_LIST_VERSIONS_CMD ioctl; b. pool_target not registered; c. modprobe dm_thin_pool and wait until end. Process B (vgchange -ay -K): a. send DM_LIST_VERSIONS_CMD ioctl; b. pool_target registered; c. table_load->dm_table_add_target->pool_ctr; d. _new_mapping_cache is NULL and panic. Note: 1. process A and process B are two concurrent processes. 2. pool_target can be detected by process B but _new_mapping_cache initialization has not ended. To fix dm-thin-pool, and other targets (cache, multipath, and snapshot) with the same problem, simply dm_register_target() after all resources created during module init (as labelled with __init) are finished. Signed-off-by:
monty <monty_pavel@sina.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Steven Rostedt authored
commit f73c52a5 upstream. Daniel Wagner reported a crash on the BeagleBone Black SoC. This is a single CPU architecture, and does not have a functional arch_send_call_function_single_ipi() implementation which can crash the kernel if that is called. As it only has one CPU, it shouldn't be called, but if the kernel is compiled for SMP, the push/pull RT scheduling logic now calls it for irq_work if the one CPU is overloaded, it can use that function to call itself and crash the kernel. Ideally, we should disable the SCHED_FEAT(RT_PUSH_IPI) if the system only has a single CPU. But SCHED_FEAT is a constant if sched debugging is turned off. Another fix can also be used, and this should also help with normal SMP machines. That is, do not initiate the pull code if there's only one RT overloaded CPU, and that CPU happens to be the current CPU that is scheduling in a lower priority task. Even on a system with many CPUs, if there's many RT tasks waiting to run on a single CPU, and that CPU schedules in another RT task of lower priority, it will initiate the PULL logic in case there's a higher priority RT task on another CPU that is waiting to run. But if there is no other CPU with waiting RT tasks, it will initiate the RT pull logic on itself (as it still has RT tasks waiting to run). This is a wasted effort. Not only does this help with SMP code where the current CPU is the only one with RT overloaded tasks, it should also solve the issue that Daniel encountered, because it will prevent the PULL logic from executing, as there's only one CPU on the system, and the check added here will cause it to exit the RT pull code. Reported-by:
Daniel Wagner <wagi@monom.org> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Acked-by:
Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-rt-users <linux-rt-users@vger.kernel.org> Fixes: 4bdced5c ("sched/rt: Simplify the IPI based RT balancing logic") Link: http://lkml.kernel.org/r/20171202130454.4cbbfe8d@vmware.local.homeSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jason Yan authored
commit 621f6401 upstream. The return value of smp_execute_task_sg() is the untransferred residual, but bsg_job_done() requires the length of payload received. This makes SMP passthrough commands from userland by sg ioctl to libsas get a wrong response. The userland tools such as smp_utils failed because of these wrong responses: ~#smp_discover /dev/bsg/expander-2\:13 response too short, len=0 ~#smp_discover /dev/bsg/expander-2\:134 response too short, len=0 Fix this by passing the actual received length to bsg_job_done(). And if smp_execute_task_sg() returns 0, this means received length is exactly the buffer length. [mkp: typo] Fixes: 651a0136 ("scsi: scsi_transport_sas: switch to bsg-lib for SMP passthrough") Signed-off-by:
Jason Yan <yanaijie@huawei.com> Reported-by:
chenqilin <chenqilin2@huawei.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
commit 14e3062f upstream. Avoid that scsi_show_rq() triggers a NULL pointer dereference if called after sd_uninit_command(). Swap the NULL pointer assignment and the mempool_free() call in sd_uninit_command() to make it less likely that scsi_show_rq() triggers a use-after-free. Note: even with these changes scsi_show_rq() can trigger a use-after-free but that's a lesser evil than e.g. suppressing debug information for T10 PI Type 2 commands completely. This patch fixes the following oops: BUG: unable to handle kernel NULL pointer dereference at (null) IP: scsi_format_opcode_name+0x1a/0x1c0 CPU: 1 PID: 1881 Comm: cat Not tainted 4.14.0-rc2.blk_mq_io_hang+ #516 Call Trace: __scsi_format_command+0x27/0xc0 scsi_show_rq+0x5c/0xc0 __blk_mq_debugfs_rq_show+0x116/0x130 blk_mq_debugfs_rq_show+0xe/0x10 seq_read+0xfe/0x3b0 full_proxy_read+0x54/0x90 __vfs_read+0x37/0x160 vfs_read+0x96/0x130 SyS_read+0x55/0xc0 entry_SYSCALL_64_fastpath+0x1a/0xa5 [mkp: added Type 2] Fixes: 0eebd005 ("scsi: Implement blk_mq_ops.show_rq()") Reported-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Cc: James E.J. Bottomley <jejb@linux.vnet.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ming Lei <ming.lei@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.com> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by:
-
Mark Rutland authored
commit 1d08a044 upstream. In ptdump_check_wx(), we pass walk_pgd() a start address of 0 (rather than VA_START) for the init_mm. This means that any reported W&X addresses are offset by VA_START, which is clearly wrong and can make them appear like userspace addresses. Fix this by telling the ptdump code that we're walking init_mm starting at VA_START. We don't need to update the addr_markers, since these are still valid bounds regardless. Fixes: 1404d6f1 ("arm64: dump: Add checking for writable and exectuable pages") Signed-off-by:
Mark Rutland <mark.rutland@arm.com> Cc: Kees Cook <keescook@chromium.org> Cc: Laura Abbott <labbott@redhat.com> Reported-by:
Timur Tabi <timur@codeaurora.org> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
Steve Capper authored
commit f24e5834 upstream. The high_memory global variable is used by cma_declare_contiguous(.) before it is defined. We don't notice this as we compute __pa(high_memory - 1), and it looks like we're processing a VA from the direct linear map. This problem becomes apparent when we flip the kernel virtual address space and the linear map is moved to the bottom of the kernel VA space. This patch moves the initialisation of high_memory before it used. Fixes: f7426b98 ("mm: cma: adjust address limit to avoid hitting low/high memory boundary") Signed-off-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
-
Steve Capper authored
commit 8781bcbc upstream. On systems with hardware dirty bit management, the ltp madvise09 unit test fails due to dirty bit information being lost and pages being incorrectly freed. This was bisected to: arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect() Reverting this commit leads to a separate problem, that the unit test retains pages that should have been dropped due to the function madvise_free_pte_range(.) not cleaning pte's properly. Currently pte_mkclean only clears the software dirty bit, thus the following code sequence can appear: pte = pte_mkclean(pte); if (pte_dirty(pte)) // this condition can return true with HW DBM! This patch also adjusts pte_mkclean to set PTE_RDONLY thus effectively clearing both the SW and HW dirty information. In order for this to function on systems without HW DBM, we need to also adjust pte_mkdirty to remove the read only bit from writable pte's to avoid infinite fault loops. Fixes: 64c26841 ("arm64: Ignore hardware dirty bit updates in ptep_set_wrprotect()") Reported-by:
Bhupinder Thakur <bhupinder.thakur@linaro.org> Tested-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Scott Mayhew authored
commit dc4fd9ab upstream. If there were no commit requests, then nfs_commit_inode() should not wait on the commit or mark the inode dirty, otherwise the following BUG_ON can be triggered: [ 1917.130762] kernel BUG at fs/inode.c:578! [ 1917.130766] Oops: Exception in kernel mode, sig: 5 [#1] [ 1917.130768] SMP NR_CPUS=2048 NUMA pSeries [ 1917.130772] Modules linked in: iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi blocklayoutdriver rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache sunrpc sg nx_crypto pseries_rng ip_tables xfs libcrc32c sd_mod crc_t10dif crct10dif_generic crct10dif_common ibmvscsi scsi_transport_srp ibmveth scsi_tgt dm_mirror dm_region_hash dm_log dm_mod [ 1917.130805] CPU: 2 PID: 14923 Comm: umount.nfs4 Tainted: G ------------ T 3.10.0-768.el7.ppc64 #1 [ 1917.130810] task: c0000005ecd88040 ti: c00000004cea0000 task.ti: c00000004cea0000 [ 1917.130813] NIP: c000000000354178 LR: c000000000354160 CTR: c00000000012db80 [ 1917.130816] REGS: c00000004cea3720 TRAP: 0700 Tainted: G ------------ T (3.10.0-768.el7.ppc64) [ 1917.130820] MSR: 8000000100029032 <SF,EE,ME,IR,DR,RI> CR: 22002822 XER: 20000000 [ 1917.130828] CFAR: c00000000011f594 SOFTE: 1 GPR00: c000000000354160 c00000004cea39a0 c0000000014c4700 c0000000018cc750 GPR04: 000000000000c750 80c0000000000000 0600000000000000 04eeb76bea749a03 GPR08: 0000000000000034 c0000000018cc758 0000000000000001 d000000005e619e8 GPR12: c00000000012db80 c000000007b31200 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 c000000000dfc3ec 0000000000000000 c0000005eefc02c0 GPR28: d0000000079dbd50 c0000005b94a02c0 c0000005b94a0250 c0000005b94a01c8 [ 1917.130867] NIP [c000000000354178] .evict+0x1c8/0x350 [ 1917.130871] LR [c000000000354160] .evict+0x1b0/0x350 [ 1917.130873] Call Trace: [ 1917.130876] [c00000004cea39a0] [c000000000354160] .evict+0x1b0/0x350 (unreliable) [ 1917.130880] [c00000004cea3a30] [c0000000003558cc] .evict_inodes+0x13c/0x270 [ 1917.130884] [c00000004cea3af0] [c000000000327d20] .kill_anon_super+0x70/0x1e0 [ 1917.130896] [c00000004cea3b80] [d000000005e43e30] .nfs_kill_super+0x20/0x60 [nfs] [ 1917.130900] [c00000004cea3c00] [c000000000328a20] .deactivate_locked_super+0xa0/0x1b0 [ 1917.130903] [c00000004cea3c80] [c00000000035ba54] .cleanup_mnt+0xd4/0x180 [ 1917.130907] [c00000004cea3d10] [c000000000119034] .task_work_run+0x114/0x150 [ 1917.130912] [c00000004cea3db0] [c00000000001ba6c] .do_notify_resume+0xcc/0x100 [ 1917.130916] [c00000004cea3e30] [c00000000000a7b0] .ret_from_except_lite+0x5c/0x60 [ 1917.130919] Instruction dump: [ 1917.130921] 7fc3f378 486734b5 60000000 387f00a0 38800003 4bdcb365 60000000 e95f00a0 [ 1917.130927] 694a0060 7d4a0074 794ad182 694a0001 <0b0a0000> 892d02a4 2f890000 40de0134 Signed-off-by:
Scott Mayhew <smayhew@redhat.com> Signed-off-by:
-
Daniel Jurgens authored
commit 0fbe8f57 upstream. Per the infiniband spec an SMI MAD can have any PKey. Checking the pkey on SMI MADs is not necessary, and it seems that some older adapters using the mthca driver don't follow the convention of using the default PKey, resulting in false denials, or errors querying the PKey cache. SMI MAD security is still enforced, only agents allowed to manage the subnet are able to receive or send SMI MADs. Reported-by:
Chris Blake <chrisrblake93@gmail.com> Fixes: 47a2b338 ("IB/core: Enforce security on management datagrams") Signed-off-by:
Daniel Jurgens <danielj@mellanox.com> Reviewed-by:
Parav Pandit <parav@mellanox.com> Signed-off-by:
Leon Romanovsky <leon@kernel.org> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Daniel Jurgens authored
commit 4cae8ff1 upstream. The alternate port number is used as an array index in the IB security implementation, invalid values can result in a kernel panic. Fixes: d291f1a6 ("IB/core: Enforce PKey security on QPs") Signed-off-by:
-
Mathias Nyman authored
commit 5d9b70f7 upstream. Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Chunfeng Yun authored
commit 72b663a9 upstream. For MTK's xHCI 1.0 or latter, TD size is the number of max packet sized packets remaining in the TD, not including this TRB (following spec). For MTK's xHCI 0.96 and older, TD size is the number of max packet sized packets remaining in the TD, including this TRB (not following spec). Signed-off-by:
Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by:
-
Yan, Zheng authored
commit 040d7860 upstream. Negative child dentry holds reference on inode's alias, it makes d_prune_aliases() do nothing. Signed-off-by:
"Yan, Zheng" <zyan@redhat.com> Reviewed-by:
Jeff Layton <jlayton@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Christoph Fritz authored
commit 91516a2a upstream. To get an usdhc Apacer and some ATP SD cards work reliable, CMD23 needs to be disabled. This has been tested on i.MX6 (sdhci-esdhc) and rk3288 (dw_mmc-rockchip). Without this patch on i.MX6 (sdhci-esdhc): $ dd if=/dev/urandom of=/mnt/test bs=1M count=10 conv=fsync | <mmc0: starting CMD23 arg 00000400 flags 00000015> | mmc0: starting CMD25 arg 00a71f00 flags 000000b5 | mmc0: blksz 512 blocks 1024 flags 00000100 tsac 3000 ms nsac 0 | mmc0: CMD12 arg 00000000 flags 0000049d | sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001 | mmc0: Timeout waiting for hardware interrupt. Without this patch on rk3288 (dw_mmc-rockchip): | mmc1: Card stuck in programming state! mmcblk1 card_busy_detect | dwmmc_rockchip ff0c0000.dwmmc: Busy; trying anyway | mmc_host mmc1: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, | actual 400000HZ div = 0) | mmc1: card never left busy state | mmc1: tried to reset card, got error -110 | blk_update_request: I/O error, dev mmcblk1, sector 139778 | Buffer I/O error on dev mmcblk1p1, logical block 131586, lost async | page write Signed-off-by:
Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Shuah Khan authored
commit be6123df upstream. stub_send_ret_submit() handles urb with a potential null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Reported-by:
Secunia Research <vuln@secunia.com> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by:
-
Shuah Khan authored
commit 2f2d0088 upstream. When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by:
-
Shuah Khan authored
commit c6688ef9 upstream. Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Validate early in get_pipe() and return failure. Reported-by:
-
Shuah Khan authored
commit 635f545a upstream. get_pipe() routine doesn't validate the input endpoint number and uses to reference ep_in and ep_out arrays. Invalid endpoint number can trigger BUG(). Range check the epnum and returning error instead of calling BUG(). Change caller stub_recv_cmd_submit() to handle the get_pipe() error return. Reported-by:
-
Amir Goldstein authored
commit b02a16e6 upstream. This fixes a regression with readdir of impure dir in overlayfs that is shared to VM via 9p fs. Reported-by:
Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com> Fixes: 4edb83bb ("ovl: constant d_ino for non-merge dirs") Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Tested-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
-
Vivek Goyal authored
commit 08d8f8a5 upstream. Right now we seem to be passing index as "lowerdentry" and origin.dentry as "upperdentry". IIUC, we should pass these parameters in reversed order and this looks like a bug. Signed-off-by:
Vivek Goyal <vgoyal@redhat.com> Acked-by:
-
Alan Stern authored
commit 48a4ff1c upstream. A malicious USB device with crafted descriptors can cause the kernel to access unallocated memory by setting the bNumInterfaces value too high in a configuration descriptor. Although the value is adjusted during parsing, this adjustment is skipped in one of the error return paths. This patch prevents the problem by setting bNumInterfaces to 0 initially. The existing code already sets it to the proper value after parsing is complete. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
-
David Kozub authored
commit 62354454 upstream. There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails with the following error: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [sda] tag#0 Sense Key : Illegal Request [current] [sda] tag#0 Add. Sense: Invalid field in cdb The issue occurs both with UAS (occasionally) and mass storage (immediately after mounting a FS on a disk in the enclosure). Enabling US_FL_BROKEN_FUA quirk solves this issue. This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure for both UAS and mass storage. Signed-off-by:
David Kozub <zub@linux.fjfi.cvut.cz> Acked-by:
-
Changbin Du authored
commit 90e406f9 upstream. The default NR_CPUS can be very large, but actual possible nr_cpu_ids usually is very small. For my x86 distribution, the NR_CPUS is 8192 and nr_cpu_ids is 4. About 2 pages are wasted. Most machines don't have so many CPUs, so define a array with NR_CPUS just wastes memory. So let's allocate the buffer dynamically when need. With this change, the mutext tracing_cpumask_update_lock also can be removed now, which was used to protect mask_str. Link: http://lkml.kernel.org/r/1512013183-19107-1-git-send-email-changbin.du@intel.com Fixes: 36dfe925 ("ftrace: make use of tracing_cpumask") Signed-off-by:
Changbin Du <changbin.du@intel.com> Signed-off-by:
-
Michal Hocko authored
commit 4837fe37 upstream. David Rientjes has reported the following memory corruption while the oom reaper tries to unmap the victims address space BUG: Bad page map in process oom_reaper pte:6353826300000000 pmd:00000000 addr:00007f50cab1d000 vm_flags:08100073 anon_vma:ffff9eea335603f0 mapping: (null) index:7f50cab1d file: (null) fault: (null) mmap: (null) readpage: (null) CPU: 2 PID: 1001 Comm: oom_reaper Call Trace: unmap_page_range+0x1068/0x1130 __oom_reap_task_mm+0xd5/0x16b oom_reaper+0xff/0x14c kthread+0xc1/0xe0 Tetsuo Handa has noticed that the synchronization inside exit_mmap is insufficient. We only synchronize with the oom reaper if tsk_is_oom_victim which is not true if the final __mmput is called from a different context than the oom victim exit path. This can trivially happen from context of any task which has grabbed mm reference (e.g. to read /proc/<pid>/ file which requires mm etc.). The race would look like this oom_reaper oom_victim task mmget_not_zero do_exit mmput __oom_reap_task_mm mmput __mmput exit_mmap remove_vma unmap_page_range Fix this issue by providing a new mm_is_oom_victim() helper which operates on the mm struct rather than a task. Any context which operates on a remote mm struct should use this helper in place of tsk_is_oom_victim. The flag is set in mark_oom_victim and never cleared so it is stable in the exit_mmap path. Debugged by Tetsuo Handa. Link: http://lkml.kernel.org/r/20171210095130.17110-1-mhocko@kernel.org Fixes: 21292580 ("mm: oom: let oom_reap_task and exit_mmap run concurrently") Signed-off-by:
Michal Hocko <mhocko@suse.com> Reported-by:
David Rientjes <rientjes@google.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Thiago Rafael Becker authored
commit bdcf0a42 upstream. In testing, we found that nfsd threads may call set_groups in parallel for the same entry cached in auth.unix.gid, racing in the call of groups_sort, corrupting the groups for that entry and leading to permission denials for the client. This patch: - Make groups_sort globally visible. - Move the call to groups_sort to the modifiers of group_info - Remove the call to groups_sort from set_groups Link: http://lkml.kernel.org/r/20171211151420.18655-1-thiago.becker@gmail.comSigned-off-by:
Thiago Rafael Becker <thiago.becker@gmail.com> Reviewed-by:
Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by:
NeilBrown <neilb@suse.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
NeilBrown authored
commit 302ec300 upstream. Commit ecc0c469 ("autofs: don't fail mount for transient error") was meant to replace an 'if' with a 'switch', but instead added the 'switch' leaving the case in place. Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name Fixes: ecc0c469 ("autofs: don't fail mount for transient error") Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Arnd Bergmann authored
commit 146734b0 upstream. The hardened strlen() function causes rather large stack usage in at least one file in the kernel, in particular when CONFIG_KASAN is enabled: drivers/media/usb/em28xx/em28xx-dvb.c: In function 'em28xx_dvb_init': drivers/media/usb/em28xx/em28xx-dvb.c:2062:1: error: the frame size of 3256 bytes is larger than 204 bytes [-Werror=frame-larger-than=] Analyzing this problem led to the discovery that gcc fails to merge the stack slots for the i2c_board_info[] structures after we strlcpy() into them, due to the 'noreturn' attribute on the source string length check. I reported this as a gcc bug, but it is unlikely to get fixed for gcc-8, since it is relatively easy to work around, and it gets triggered rarely. An earlier workaround I did added an empty inline assembly statement before the call to fortify_panic(), which works surprisingly well, but is really ugly and unintuitive. This is a new approach to the same problem, this time addressing it by not calling the 'extern __real_strnlen()' function for string constants where __builtin_strlen() is a compile-time constant and therefore known to be safe. We do this by checking if the last character in the string is a compile-time constant '\0'. If it is, we can assume that strlen() of the string is also constant. As a side-effect, this should also improve the object code output for any other call of strlen() on a string constant. [akpm@linux-foundation.org: add comment] Link: http://lkml.kernel.org/r/20171205215143.3085755-1-arnd@arndb.de Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365 Link: https://patchwork.kernel.org/patch/9980413/ Link: https://patchwork.kernel.org/patch/9974047/ Fixes: 6974f0c4 ("include/linux/string.h: add the option of fortified string.h functions") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Kees Cook <keescook@chromium.org> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Daniel Micay <danielmicay@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Martin Wilck <mwilck@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by:
-
Ronnie Sahlberg authored
commit a821df3f upstream. Signed-off-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Pavel Shilovsky <pshilov@microsoft.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
