- 21 Jul, 2022 4 commits
-
-
Dan Williams authored
Previously the target routing specifics of switch decoders and platform CXL window resource tracking of root decoders were factored out of 'struct cxl_decoder'. While switch decoders translate from SPA to downstream ports, endpoint decoders translate from SPA to DPA. This patch, 3 of 3, adds a 'struct cxl_endpoint_decoder' that tracks an endpoint-specific Device Physical Address (DPA) resource. For now this just defines ->dpa_res, a follow-on patch will handle requesting DPA resource ranges from a device-DPA resource tree. Co-developed-by:
Ben Widawsky <bwidawsk@kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/165784327088.1758207.15502834501671201192.stgit@dwillia2-xfh.jf.intel.comSigned-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Dan Williams authored
Previously the target routing specifics of switch decoders were factored out of 'struct cxl_decoder' into 'struct cxl_switch_decoder'. This patch, 2 of 3, adds a 'struct cxl_root_decoder' as a superset of a switch decoder that also track the associated CXL window platform resource. Note that the reason the resource for a given root decoder needs to be looked up after the fact (i.e. after cxl_parse_cfmws() and add_cxl_resource()) is because add_cxl_resource() may have merged CXL windows in order to keep them at the top of the resource tree / decode hierarchy. Co-developed-by:
-
Dan Williams authored
Recall that CXL capable address ranges, on ACPI platforms, are published in the CEDT.CFMWS (CXL Early Discovery Table: CXL Fixed Memory Window Structures). These windows represent both the actively mapped capacity and the potential address space that can be dynamically assigned to a new CXL decode configuration (region / interleave-set). CXL endpoints like DDR DIMMs can be mapped at any physical address including 0 and legacy ranges. There is an expectation and requirement that the /proc/iomem interface and the iomem_resource tree in the kernel reflect the full set of platform address ranges. I.e. that every address range that platform firmware and bus drivers enumerate be reflected as an iomem_resource entry. The hard requirement to do this for CXL arises from the fact that facilities like CONFIG_DEVICE_PRIVATE expect to be able to treat empty iomem_resource ranges as free for software to use as proxy address space. Without CXL publishing its potential address ranges in iomem_resource, the CONFIG_DEVICE_PRIVATE mechanism may inadvertently steal capacity reserved for runtime provisioning of new CXL regions. So, iomem_resource needs to know about both active and potential CXL resource ranges. The active CXL resources might already be reflected in iomem_resource as "System RAM". insert_resource_expand_to_fit() handles re-parenting "System RAM" underneath a CXL window. The "_expand_to_fit()" behavior handles cases where a CXL window is not a strict superset of an existing entry in the iomem_resource tree. The "_expand_to_fit()" behavior is acceptable from the perspective of resource allocation. The expansion happens because a conflicting resource range is already populated, which means the resource boundary expansion does not result in any additional free CXL address space being made available. CXL address space allocation is always bounded by the orginal unexpanded address range. However, the potential for expansion does mean that something like walk_iomem_res_desc(IORES_DESC_CXL...) can only return fuzzy answers on corner case platforms that cause the resource tree to expand a CXL window resource over a range that is not decoded by CXL. This would be an odd platform configuration, but if it becomes a problem in practice the CXL subsytem could just publish an API that returns definitive answers. Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Hildenbrand <david@redhat.com> Cc: Jason Gunthorpe <jgg@nvidia.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/165784325943.1758207.5310344844375305118.stgit@dwillia2-xfh.jf.intel.comSigned-off-by:
-
Dan Williams authored
Currently 'struct cxl_decoder' contains the superset of attributes needed for all decoder types. Before more type-specific attributes are added to the common definition, reorganize 'struct cxl_decoder' into type specific objects. This patch, the first of three, factors out a cxl_switch_decoder type. See the new kdoc for what a 'struct cxl_switch_decoder' represents in a CXL topology. Co-developed-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/165784325340.1758207.5064717153608954960.stgit@dwillia2-xfh.jf.intel.comSigned-off-by:
-
- 19 Jul, 2022 7 commits
-
-
Dan Williams authored
Make it easier to read delineations between the "Description" line break, new paragraph line breaks, and new entries. Reviewed-by:
-
Ira Weiny authored
The per-device CDAT data provides performance data that is relevant for mapping which CXL devices can participate in which CXL ranges by QTG (QoS Throttling Group) (per ECN: CXL 2.0 CEDT CFMWS & QTG_DSM) [1]. The QTG association specified in the ECN is advisory. Until the cxl_acpi driver grows support for invoking the QTG _DSM method the CDAT data is only of interest to userspace that may need it for debug purposes. Search the DOE mailboxes available, query CDAT data, cache the data and make it available via a sysfs binary attribute per endpoint at: /sys/bus/cxl/devices/endpointX/CDAT ...similar to other ACPI-structured table data in /sys/firmware/ACPI/tables. The CDAT is relative to 'struct cxl_port' objects since switches in addition to endpoints can host a CDAT instance. Switch CDAT support is not implemented. This does not support table updates at runtime. It will always provide whatever was there when first cached. It is also the case that table updates are not expected outside of explicit DPA address map affecting commands like Set Partition with the immediate flag set. Given that the driver does not support Set Partition with the immediate flag set there is no current need for update support. Link: https://www.computeexpresslink.org/spec-landing [1] Signed-off-by:
Ira Weiny <ira.weiny@intel.com> [djbw: drop in-kernel parsing infra for now, and other minor fixups] Reviewed-by:
-
Ira Weiny authored
Many binary attributes need to limit access to CAP_SYS_ADMIN only; ie many binary attributes specify is_visible with 0400 or 0600. Make setting the permissions of such attributes more explicit by defining BIN_ATTR_ADMIN_{RO,RW}. Cc: Bjorn Helgaas <bhelgaas@google.com> Suggested-by:Krzysztof Wilczyński <kw@linux.com> Reviewed-by:
-
Ira Weiny authored
DOE mailbox objects will be needed for various mailbox communications with each memory device. Iterate each DOE mailbox capability and create PCI DOE mailbox objects as found. It is not anticipated that this is the final resting place for the iteration of the DOE devices. The support of switch ports will drive this code into the PCIe side. In this imagined architecture the CXL port driver would then query into the PCI device for the DOE mailbox array. For now creating the mailboxes in the CXL port is good enough for the endpoints. Later PCIe ports will need to support this to support switch ports more generically. Cc: Dan Williams <dan.j.williams@intel.com> Cc: Davidlohr Bueso <dave@stgolabs.net> Cc: Lukas Wunner <lukas@wunner.de> Reviewed-by:
-
Jonathan Cameron authored
Introduced in a PCIe r6.0, sec 6.30, DOE provides a config space based mailbox with standard protocol discovery. Each mailbox is accessed through a DOE Extended Capability. Each DOE mailbox must support the DOE discovery protocol in addition to any number of additional protocols. Define core PCIe functionality to manage a single PCIe DOE mailbox at a defined config space offset. Functionality includes iterating, creating, query of supported protocol, and task submission. Destruction of the mailboxes is device managed. Cc: "Li, Ming" <ming4.li@intel.com> Cc: Bjorn Helgaas <helgaas@kernel.org> Cc: Matthew Wilcox <willy@infradead.org> Acked-by:
Bjorn Helgaas <helgaas@kernel.org> Signed-off-by:
-
Ira Weiny authored
Replace the magic value in pci_bus_crs_vendor_id() with PCI_VENDOR_ID_PCI_SIG. Reviewed-by:
Davidlohr Bueso <dave@stgolabs.net> Suggested-by:
Bjorn Helgaas <bhelgaas@google.com> Acked-by:
-
Jonathan Cameron authored
This ID is used in DOE headers to identify protocols that are defined within the PCI Express Base Specification, PCIe r6.0, sec 6.30.1.1 table 6-32. Acked-by:
-
- 11 Jul, 2022 1 commit
-
-
Dan Williams authored
While there is a need to go from a LIBNVDIMM 'struct nvdimm' to a CXL 'struct cxl_nvdimm', there is no use case to go the other direction. Likely this is a leftover from an early version of the referenced commit before it implemented devm for releasing the created nvdimm. Reviewed-by:
-
- 10 Jul, 2022 11 commits
-
-
Dan Williams authored
Unless and until accelerator (type-2) drivers start registering for CXL.mem mapping services from the CXL subsystem core, initialize idle HDM decoders to the "expander" type. I.e. the only CXL devices using the CXL core presently are those implementing the CXL 2.0 Type-3 memory expander device class code that the cxl_pci driver claims. Reviewed-by:
-
Dan Williams authored
Region creation has need for checking host-bridge connectivity when adding endpoints to regions. Record, at port creation time, the host-bridge to provide a useful shortcut from any location in the topology to the most-significant ancestor. Reviewed-by:
-
Dan Williams authored
The 'enabled' state is reserved for committed decoders. By default, cxl_test decoders are uncommitted at init time. Fixes: 7c7d68db ("tools/testing/cxl: Enumerate mock decoders") Reviewed-by:
-
Dan Williams authored
In support of testing DPA allocation mechanisms in the CXL core, the cxl_test environment needs to support establishing and retrieving the 'pmem partition boundary. Replace the platform_device_add_resources() method for delineating DPA within an endpoint with an emulated DEV_SIZE amount of partitionable capacity. Set DEV_SIZE such that an endpoint has enough capacity to simultaneously participate in 8 distinct regions. Reviewed-by:
-
Dan Williams authored
For the x2 host-bridge interleave windows, allow for a x8-endpoint-interleave configuration per memory-type with each device contributing the minimum 256MB extent. Similarly, for the x1 host-bridge interleave windows, allow for a x4-endpoint-interleave configuration per memory-type. Bump up the number of decoders per-port to support hosting 8 regions. Reviewed-by:
-
Dan Williams authored
A recent QEMU upgrade resulted in collisions between QEMU's chosen location for PCI MMIO and cxl_test's fake address location for emulated CXL purposes. This was great for testing resource collisions, but not so great for continuing to test the nominal cases. Move cxl_test to the top-of-memory where it is less likely to collide with other resources. Reviewed-by:
-
Dan Williams authored
Dump the device-physical-address map for a CXL expander in /proc/iomem style format. E.g.: cat /sys/kernel/debug/cxl/mem1/dpamem 00000000-0fffffff : ram 10000000-1fffffff : pmem Reviewed-by:
-
Dan Williams authored
In preparation for a new cxl debugfs file, move 'cxl' directory establishment and teardown to the core and let subsequent init routines reference that setup. Reviewed-by:
-
Dan Williams authored
Clarify the access permission of CXL sysfs attributes in the documentation to help development of userspace tooling. Reported-by:
Alison Schofield <alison.schofield@intel.com> Reviewed-by:
-
Ben Widawsky authored
In preparation for region provisioning all device decoders need to be enumerated since DPA allocations are calculated by summing the capacities of all decoders in a set. I.e. the programming for decoder[N] depends on the state of decoder[N-1], so skipping over decoders that fail to initialize prevents accurate DPA accounting. Signed-off-by:
-
Dan Williams authored
To date the per-device-partition DPA range information has only been used for enumeration purposes. In preparation for allocating regions from available DPA capacity, convert those ranges into DPA-type resource trees. With resources and the new add_dpa_res() helper some open coded end address calculations and debug prints can be cleaned. The 'cxlds->pmem_res' and 'cxlds->ram_res' resources are child resources of the total-device DPA space and they in turn will host DPA allocations from cxl_endpoint_decoder instances (tracked by cxled->dpa_res). Cc: Ira Weiny <ira.weiny@intel.com> Reviewed-by:
-
- 09 Jul, 2022 6 commits
-
-
Dan Williams authored
Interleave granularity and ways have CXL specification defined encodings. Promote the conversion helpers to a common header, and use them to replace other open-coded instances. Force caller to consider the error case of the conversion similarly to other conversion helpers like kstrto*(). Co-developed-by:
-
Dan Williams authored
This helper was only used to identify the object type for lockdep purposes. Now that lockdep support is done with explicit lock classes, this helper can be dropped. Reviewed-by:
Adam Manzanares <a.manzanares@samsung.com> Link: https://lore.kernel.org/r/165603874340.551046.15491766127759244728.stgit@dwillia2-xfhSigned-off-by:
-
Dan Williams authored
Root decoders are responsible for hosting the available host address space for endpoints and regions to claim. The tracking of that available capacity can be done in iomem_resource directly. As a result, root decoders no longer need to host their own resource tree. The current ->platform_res attribute was added prematurely. Otherwise, ->hpa_range fills the role of conveying the current decode range of the decoder. Reviewed-by:
-
Dan Williams authored
In preparation for growing a ->dpa_range attribute for endpoint decoders, rename the current ->decoder_range to the more descriptive ->hpa_range. Reviewed-by:
-
Ben Widawsky authored
Save a few characters and use the already initialized local variable. Signed-off-by:
-
Dan Williams authored
The upcoming region provisioning implementation has a need to dereference port->uport during the port unregister flow. Specifically, endpoint decoders need to be able to lookup their corresponding memdev via port->uport. The existing ->dead flag was added for cases where the core was committed to tearing down the port, but needed to drop locks before calling device_unregister(). Reuse that flag to indicate to delete_endpoint() that it has no "release action" work to do as unregister_port() will handle it. Reviewed-by:
-
- 29 Jun, 2022 2 commits
-
-
Dan Williams authored
This failing signature: [ 8.392669] cxl_bus_probe: cxl_port endpoint2: probe: 970997760 [ 8.392670] cxl_port: probe of endpoint2 failed with error 970997760 [ 8.392719] create_endpoint: cxl_mem mem0: add: endpoint2 [ 8.392721] cxl_mem mem0: endpoint2 failed probe [ 8.392725] cxl_bus_probe: cxl_mem mem0: probe: -6 ...shows cxl_hdm_decode_init() resulting in a return code ("970997760") that looks like stack corruption. The problem goes away if cxl_hdm_decode_init() is not mocked via __wrap_cxl_hdm_decode_init(). The corruption results from the mismatch that the calling convention for cxl_hdm_decode_init() is: int cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm) ...and __wrap_cxl_hdm_decode_init() is: bool __wrap_cxl_hdm_decode_init(struct cxl_dev_state *cxlds, struct cxl_hdm *cxlhdm) ...i.e. an int is expected but __wrap_hdm_decode_init() returns bool. Fix the convention and cleanup the organization to match __wrap_cxl_await_media_ready() as the difference was a red herring that distracted from finding the bug. Fixes: 92804edb ("cxl/pci: Drop @info argument to cxl_hdm_decode_init()") Reviewed-by: -
Vishal Verma authored
The conversion of command sizes to unsigned missed a couple of checks against variable size payloads during command validation, which made all variable payload commands unconditionally fail. Add the checks back using the new CXL_VARIABLE_PAYLOAD scheme. Fixes: 26f89535 ("cxl/mbox: Use type __u32 for mailbox payload sizes") Cc: <stable@vger.kernel.org> Cc: Ira Weiny <ira.weiny@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Alison Schofield <alison.schofield@intel.com> Reported-by:
Abhi Cs <abhi.cs@intel.com> Reviewed-by:
Vishal Verma <vishal.l.verma@intel.com> Link: https://lore.kernel.org/r/20220628220109.633564-1-vishal.l.verma@intel.comSigned-off-by:
-
- 24 Jun, 2022 1 commit
-
-
Dan Williams authored
In the CONFIG_MEMREGION=n case, memregion_free() is meant to be a static inline. 0day reports: In file included from drivers/cxl/core/port.c:4: include/linux/memregion.h:19:6: warning: no previous prototype for function 'memregion_free' [-Wmissing-prototypes] Mark memregion_free() static. Fixes: 33dd7075 ("lib: Uplevel the pmem "region" ida to a global allocator") Reported-by:
-
- 21 Jun, 2022 4 commits
-
-
Alison Schofield authored
CXL specification defines these as little endian. Fixes: 60b8f172 ("cxl/pmem: Translate NVDIMM label commands to CXL label commands") Reported-by:
-
Ben Widawsky authored
Save some characters and directly check decoder type rather than port type. There's no need to check if the port is an endpoint port since, by this point, cxl_endpoint_decoder_alloc() has a specified type. Reviewed by: Adam Manzanares <a.manzanares@samsung.com> Signed-off-by:
Ben Widawsky <ben.widawsky@intel.com> Signed-off-by:
-
Jonathan Cameron authored
The device is created, and then there is a check if a driver succesfully bound to it. In event of failing the bind (e.g. failure in cxl_port_probe()) the device is left registered. When a bus rescan later occurs, fresh devices are created leading to a multiple device representing the same underlying hardware. Bad things may follow and at very least we have far too many devices. Fix by ensuring autoremove is registered if the device create succeeds, but doesn't depend on sucessful binding to a driver. Bug was observed as side effect of incorrect ownership in [PATCH v9 6/9] cxl/port: Read CDAT table but will result from any failure to in cxl_port_probe(). Fixes: 8dd2bc0f ("cxl/mem: Add the cxl_mem driver") Signed-off-by:
-
Ben Widawsky authored
I'm leaving Intel. Update email address to korg and add .mailmap entries. For now, I will be taking a reduced role in CXL development, but I still plan to spend time working on it, and I can still serve as a good substitute if needed for maintainer responsibilities (that may change in the future). Signed-off-by:
-
- 19 Jun, 2022 4 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: - Make RESERVE_BRK() work again with older binutils. The recent 'simplification' broke that. - Make early #VE handling increment RIP when successful. - Make the #VE code consistent vs. the RIP adjustments and add comments. - Handle load_unaligned_zeropad() across page boundaries correctly in #VE when the second page is shared. * tag 'x86-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/tdx: Handle load_unaligned_zeropad() page-cross to a shared page x86/tdx: Clarify RIP adjustments in #VE handler x86/tdx: Fix early #VE handling x86/mm: Fix RESERVE_BRK() for older binutils
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull build tooling updates from Thomas Gleixner: - Remove obsolete CONFIG_X86_SMAP reference from objtool - Fix overlapping text section failures in faddr2line for real - Remove OBJECT_FILES_NON_STANDARD usage from x86 ftrace and replace it with finegrained annotations so objtool can validate that code correctly. * tag 'objtool-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/ftrace: Remove OBJECT_FILES_NON_STANDARD usage faddr2line: Fix overlapping text section failures, the sequel objtool: Fix obsolete reference to CONFIG_X86_SMAP
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Thomas Gleixner: "A single scheduler fix plugging a race between sched_setscheduler() and balance_push(). sched_setscheduler() spliced the balance callbacks accross a lock break which makes it possible for an interleaving schedule() to observe an empty list" * tag 'sched-urgent-2022-06-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched: Fix balance_push() vs __sched_setscheduler()
-
