- 12 Jun, 2013 4 commits
-
-
Wolfram Sang authored
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Mika Westerberg authored
If a process receives signal while it is waiting for I2C transfer to complete, an error is returned to the caller and the transfer is aborted. This can cause the driver to fail subsequent transfers. Also according to commit d295a86e (i2c: mv64xxx: work around signals causing I2C transactions to be aborted) I2C drivers aren't supposed to abort transactions on signals. To prevent this switch to use wait_for_completion_timeout() instead of wait_for_completion_interruptible_timeout() in the designware I2C driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Christian Ruppert <christian.ruppert@abilis.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Fabio Estevam authored
Since commit ab78029e (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Fabio Estevam authored
Since commit ab78029e (drivers/pinctrl: grab default handles from device core), we can rely on device core for handling pinctrl. So remove devm_pinctrl_get_select_default() from the driver. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 05 Jun, 2013 9 commits
-
-
Russell King authored
Asking for a multi-part message to be handled by this driver is racy; it has been observed that the following sequence is possible with this driver: - send start - send address + write - send data - send (repeated) start - send address + write - send (repeated) start - send address + read - unrecoverable bus hang (except by system reset) The problem is that the interrupt handling sees the next event after the first repeated start is sent - the IFLG bit is set in the register even though INTEN is disabled. Let's fix this by moving all of the message processing into interrupt context, rather than having it partly in IRQ and partly in process context. This allows us to move immediately to the next message in the interrupt handler and get on with the transfer, rather than incuring a couple of scheduling switches to get the next message. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Russell King authored
Move mv64xxx_i2c_prepare_for_io() higher up in the driver to avoid a future forward declaration for this function. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Russell King authored
As this driver does not advertise protocol mangling support (I2C_FUNC_PROTOCOL_MANGLING is not set), having code to act on I2C_M_NOSTART is illogical, and in any case isn't supportable on anything but the first message - which makes no sense. Remove the I2C_M_NOSTART code. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Russell King authored
Propagate the error code from request_irq() rather than ignoring it entirely. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Russell King authored
As we're changing to using devm_* APIs to fix various problems in this driver, lets also do devm_kzalloc() while we're here too. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Russell King authored
This driver forgets to use clk_put(). Rather than adding clk_put(), lets instead use devm_clk_get() to obtain this clock so that it's automatically handled on cleanup. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Russell King authored
Eliminate reg_base_p and reg_size, mv64xxx_i2c_unmap_regs() and an unchecked ioremap() return from this driver by using the devm_* API for requesting and ioremapping resources. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Russell King authored
mv64xxx_i2c_map_regs() already returns an error code, so lets propagate that to mv64xxx_i2c_probe()'s caller. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
Andy Shevchenko authored
Moorestown support is removed from kernel and Medfield is supported by i2c-designware-pci. But i2c-intel-mid is still in upstream and community resources are wasted to maintain it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
-
- 03 Jun, 2013 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68kLinus Torvalds authored
Pull m68k fix from Geert Uytterhoeven: "A boot lock-up on Mac, also destined for stable" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k/mac: Fix unexpected interrupt with CONFIG_EARLY_PRINTK
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Recent bug fixes, one of them touches a common code file. It adds two #ifndef/#endif pairs to asm-generic/io.h to be able to override xlate_dev_kmem_ptr and xlate_dev_mem_ptr." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pgtable: Fix gmap notifier address s390/dasd: fix handling of gone paths s390/pgtable: Fix check for pgste/storage key handling arch: s390: appldata: using strncpy() and strnlen() instead of sprintf() s390/smp: lost IPIs on cpu hotplug kernel: Fix s390 absolute memory access for /dev/mem s390/dma: do not call debug_dma after free
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull cgroup fixes from Tejun Heo: - Fix for yet another xattr bug which may lead to NULL deref. - A subtle bug in for_each_descendant_pre(). This bug requires quite specific conditions to trigger and isn't too likely to actually happen in the wild, but maybe that just makes it that much more nastier. - A warning message added for silly cgroup re-mount (not -o remount, but unmount followed by mount) behavior. * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: warn about mismatching options of a new mount of an existing hierarchy cgroup: fix a subtle bug in descendant pre-order walk cgroup: initialize xattr before calling d_instantiate()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libataLinus Torvalds authored
Pull libata changes from Tejun Heo: "Nothing too interesting. PCI ID additions, some sata_rcar fixes and a fringe bug fix for DMADIR handling which shouldn't affect any device remotely modern." * 'for-3.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: sata_rcar: fix interrupt handling ahci: add an observed PCI ID for Marvell 88se9172 SATA controller sata_rcar: clear STOP bit in bmdma_start() method libata: make ata_exec_internal_sg honor DMADIR ata_piix: add PCI IDs for Intel BayTail libata: update "Maintained by:" tags
-
- 02 Jun, 2013 2 commits
-
-
Linus Torvalds authored
-
Sergei Shtylyov authored
The driver's interrupt handling code is too picky in deciding whether it should handle an interrupt or not which causes completely unneeded spurious interrupts. Thus make sata_rcar_{ata|serr}_interrupt() *void*; add ATA status register read to sata_rcar_ata_interrupt() to clear an unexpected ATA interrupt -- it doesn't get cleared by writing to the SATAINTSTAT register in the interrupt mode we use. Also, in sata_rcar_ata_interrupt() we should check SATAINTSTAT register only for enabled interrupts and we should clear only those interrupts that we have read as active first time around, because else we have a race and risk clearing an interrupt that can occur between read and write of the SATAINTSTAT register and never registering it... Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
-
- 01 Jun, 2013 16 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "This patcheset includes fixes for: - the PCI/LBA which brings back the stifb graphics framebuffer console - possible memory overflows in parisc kernel init code - parport support on older GSC machines - avoids that users by mistake enable PARPORT_PC_SUPERIO on parisc - MAINTAINERS file list updates for parisc." * 'for-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: parport0: fix this legacy no-device port driver! parport_pc: disable PARPORT_PC_SUPERIO on parisc architecture parisc/PCI: lba: fix: convert to pci_create_root_bus() for correct root bus resources (v2) parisc/PCI: Set type for LBA bus_num resource MAINTAINERS: update parisc architecture file list parisc: kernel: using strlcpy() instead of strcpy() parisc: rename "CONFIG_PA7100" to "CONFIG_PA7000" parisc: fix kernel BUG at arch/parisc/include/asm/mmzone.h:50 parisc: memory overflow, 'name' length is too short for using
-
Helge Deller authored
Fix the above kernel error from parport_announce_port() on 32bit GSC machines (e.g. B160L). The parport driver requires now a pointer to the device struct. Signed-off-by: Helge Deller <deller@gmx.de>
-
Helge Deller authored
If enabled, CONFIG_PARPORT_PC_SUPERIO scans on PC-like hardware for various super-io chips by accessing i/o ports in a range which will crash any parisc hardware at once. In addition, parisc has it's own incompatible superio chip (CONFIG_SUPERIO), so if we disable PARPORT_PC_SUPERIO completely for parisc we can avoid that people by accident enable the parport_pc superio option too. Signed-off-by: Helge Deller <deller@gmx.de>
-
Helge Deller authored
commit dc7dce28 Author: Bjorn Helgaas <bhelgaas@google.com> Date: Fri Oct 28 16:27:27 2011 -0600 parisc/PCI: lba: convert to pci_create_root_bus() for correct root bus resources Supply root bus resources to pci_create_root_bus() so they're correct immediately. This fixes the problem of "early" and "header" quirks seeing incorrect root bus resources. added tests for elmmio_space.start while it should use elmmio_space.flags. This for example led to incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. LBA 10:1: PCI host bridge to bus 0000:01 pci_bus 0000:01: root bus resource [io 0x12000-0x13fff] (bus address [0x2000-0x3fff]) pci_bus 0000:01: root bus resource [mem 0xfffffffffa000000-0xfffffffffbffffff] (bus address [0xfa000000-0xfbffffff]) pci_bus 0000:01: root bus resource [mem 0xfffffffff4800000-0xfffffffff4ffffff] (bus address [0xf4800000-0xf4ffffff]) pci_bus 0000:01: root bus resource [??? 0x00000001 flags 0x0] Signed-off-by: Helge Deller <deller@gmx.de> Acked-by: Bjorn Helgaas <bhelgaas@google.com>
-
Bjorn Helgaas authored
The non-PAT resource probing code failed to set the type of the LBA bus_num resource (30aa80da "parisc/PCI: register busn_res for root buses" did the corresponding thing for the PAT case). This causes incorrect resource assignments and a non-working stifb framebuffer on most parisc machines. Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Helge Deller <deller@gmx.de>
-
Helge Deller authored
Signed-off-by: Helge Deller <deller@gmx.de>
-
Chen Gang authored
'boot_args' is an input args, and 'boot_command_line' has a fix length. So use strlcpy() instead of strcpy() to avoid memory overflow. Signed-off-by: Chen Gang <gang.chen@asianux.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Signed-off-by: Helge Deller <deller@gmx.de>
-
Paul Bolle authored
There's a Makefile line setting cflags for CONFIG_PA7100. But that Kconfig macro doesn't exist. There is a Kconfig symbol PA7000, which covers both PA7000 and PA7100 processors. So let's use the corresponding Kconfig macro. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Helge Deller <deller@gmx.de>
-
Helge Deller authored
With CONFIG_DISCONTIGMEM=y and multiple physical memory areas, cat /proc/kpageflags triggers this kernel bug: kernel BUG at arch/parisc/include/asm/mmzone.h:50! CPU: 2 PID: 7848 Comm: cat Tainted: G D W 3.10.0-rc3-64bit #44 IAOQ[0]: kpageflags_read0x128/0x238 IAOQ[1]: kpageflags_read0x12c/0x238 RP(r2): proc_reg_read0xbc/0x130 Backtrace: [<00000000402ca2d4>] proc_reg_read0xbc/0x130 [<0000000040235bcc>] vfs_read0xc4/0x1d0 [<0000000040235f0c>] SyS_read0x94/0xf0 [<0000000040105fc0>] syscall_exit0x0/0x14 kpageflags_read() walks through the whole memory, even if some memory areas are physically not available. So, we should better not BUG on an unavailable pfn in pfn_to_nid() but just return the expected value -1 or 0. Signed-off-by: Helge Deller <deller@gmx.de>
-
Chen Gang authored
'path.bc[i]' can be asigned by PCI_SLOT() which can '> 10', so sizeof(6 * "%u:" + "%u" + '\0') may be 21. Since 'name' length is 20, it may be memory overflow. And 'path.bc[i]' is 'unsigned char' for printing, we can be sure the max length of 'name' must be less than 28. So simplify thinking, we can use 28 instead of 20 directly, and do not think of whether 'patchc.bc[i]' can '> 100'. Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Helge Deller <deller@gmx.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpcLinus Torvalds authored
Pull powerpc fixes from Ben Herrenschmidt: "Here are a few more fixes for powerpc 3.10. It's a bit more than I would have liked this late in the game but I suppose that's what happens with a brand new chip generation coming out. A few regression fixes, some last minute fixes for new P8 features such as transactional memory,... There's also one powerpc KVM patch that I requested that adds two missing functions to our in-kernel interrupt controller support which is itself a new 3.10 feature. These are defined by the base hypervisor specification. We didn't implement them originally because Linux doesn't use them but they are simple and I'm not comfortable having a half-implemented interface in 3.10 and having to deal with versionning etc... later when something starts needing those calls. They cannot be emulated in qemu when using in-kernel interrupt controller (not enough shared state). Just added a last minute patch to fix a typo introducing a breakage in our cputable for Power7+ processors, sorry about that, but the regression it fixes just hurt me :-)" * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/cputable: Fix typo on P7+ cputable entry powerpc/perf: Add missing SIER support powerpc/perf: Revert to original NO_SIPR logic powerpc/pci: Remove the unused variables in pci_process_bridge_OF_ranges powerpc/pci: Remove the stale comments of pci_process_bridge_OF_ranges powerpc/pseries: Always enable CONFIG_HOTPLUG_CPU on PSERIES SMP powerpc/kvm/book3s: Add support for H_IPOLL and H_XIRR_X in XICS emulation powerpc/32bit:Store temporary result in r0 instead of r8 powerpc/mm: Always invalidate tlb on hpte invalidate and update powerpc/pseries: Improve stream generation comments in copypage/user powerpc/pseries: Kill all prefetch streams on context switch powerpc/cputable: Fix oprofile_cpu_type on power8 powerpc/mpic: Fix irq distribution problem when MPIC_SINGLE_DEST_CPU powerpc/tm: Fix userspace stack corruption on signal delivery for active transactions powerpc/tm: Move TM abort cause codes to uapi powerpc/tm: Abort on emulation and alignment faults powerpc/tm: Update cause codes documentation powerpc/tm: Make room for hypervisor in abort cause codes
-
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pendingLinus Torvalds authored
Pull scsi target fixes from Nicholas Bellinger: "The highlights include: - Re-instate sess->wait_list in target_wait_for_sess_cmds() for active I/O shutdown handling in fabrics using se_cmd->cmd_kref - Make ib_srpt call target_sess_cmd_list_set_waiting() during session shutdown - Fix FILEIO off-by-one READ_CAPACITY bug for !S_ISBLK export - Fix iscsi-target login error heap buffer overflow (Kees) - Fix iscsi-target active I/O shutdown handling regression in v3.10-rc1 A big thanks to Kees Cook for fixing a long standing login error buffer overflow bug. All patches are CC'ed to stable with the exception of the v3.10-rc1 specific regression + other minor target cleanup." * git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: iscsi-target: Fix iscsit_free_cmd() se_cmd->cmd_kref shutdown handling target: Propigate up ->cmd_kref put return via transport_generic_free_cmd iscsi-target: fix heap buffer overflow on error target/file: Fix off-by-one READ_CAPACITY bug for !S_ISBLK export ib_srpt: Call target_sess_cmd_list_set_waiting during shutdown_session target: Re-instate sess_wait_list for target_wait_for_sess_cmds target: Remove unused wait_for_tasks bit in target_wait_for_sess_cmds
-
git://git.linaro.org/people/mturquette/linuxLinus Torvalds authored
Pull clock subsystem fixes from Mike Turquette: "A mix of small fixes affecting mostly ARM platforms as well as a discrete clock expander chip. Most fixes are corrections to lousy clock data of one form or another." * tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux: clk: mxs: Include clk mxs header file clk: vt8500: Fix unbalanced spinlock in vt8500_dclk_set_rate() clk: si5351: Set initial clkout rate when defined in platform data. clk: si5351: Fix clkout rate computation. clk: samsung: Add CLK_IGNORE_UNUSED flag for the sysreg clocks clk: ux500: clk-sysctrl: handle clocks with no parents clk: ux500: Provide device enumeration number suffix for SMSC911x
-
Linus Torvalds authored
Merge tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev Pull fbdev fixes from Jean-Christophe PLAGNIOL-VILLARD: "This contains some small fixes - Atmel LCDC: fix blank the backlight on remove - ps3fb: fix compile warning - OMAPDSS: Fix crash with DT boot" * tag 'fbdev-for-3.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/plagnioj/linux-fbdev: atmel_lcdfb: blank the backlight on remove trivial: atmel_lcdfb: add missing error message OMAPDSS: Fix crash with DT boot fbdev/ps3fb: fix compile warning
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull assorted fixes from Al Viro: "There'll be more - I'm trying to dig out from under the pile of mail (a couple of weeks of something flu-like ;-/) and there's several more things waiting for review; this is just the obvious stuff." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: zoran: racy refcount handling in vm_ops ->open()/->close() befs_readdir(): do not increment ->f_pos if filldir tells us to stop hpfs: deadlock and race in directory lseek() qnx6: qnx6_readdir() has a braino in pos calculation fix buffer leak after "scsi: saner replacements for ->proc_info()" vfs: Fix invalid ida_remove() call
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull two NFS client fixes from Trond Myklebust: - Fix a regression that broke NFS mounting using klibc and busybox - Stable fix to check access modes correctly on NFSv4 delegated open() * tag 'nfs-for-3.10-4' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: Fix security flavor negotiation with legacy binary mounts NFSv4: Fix a thinko in nfs4_try_open_cached
-
- 31 May, 2013 5 commits
-
-
Will Schmidt authored
Fix a typo in setting COMMON_USER2_POWER7 bits to .cpu_user_features2 cpu specs table. Signed-off-by: Will Schmidt <will_schmidt@vnet.ibm.com> Acked-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
Commit 8f61aa32 "Add support for SIER" missed updates to siar_valid() and perf_get_data_addr(). In both cases we need to check the SIER instead of mmcra. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Michael Ellerman authored
This is a revert and then some of commit 860aad71 "Add regs_no_sipr()". This workaround was only needed on early chip versions. As before NO_SIPR becomes a static flag of the PMU struct. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kevin Hao authored
The codes which ever used these two variables have gone. Throw away them too. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Kevin Hao authored
These comments already don't apply to the current code. So just remove them. Signed-off-by: Kevin Hao <haokexin@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
-