- 28 Mar, 2018 1 commit
-
-
Arnd Bergmann authored
Merge tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 changes for 4.17" from Heiko Stübner: For general soc-specific changes the rk322x socs got their correct grf compatible set. Other than that there are some board-specific changes like the Rock2 getting its otg port, recovery and power keys enabled. The vyasa board gained an enabled emmc node and the phyCORE boards got UHS speeds in their sd card and a fixed sd-card power supply. Finally the veyron boards dropped a nonstandard and unused property. * tag 'v4.17-rockchip-dts32-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable USB-OTG port on Radxa Rock2 Square ARM: dts: rockchip: add recovery button for Rock2 Square ARM: dts: rockchip: add power key for Rock2 Square ARM: dts: rockchip: Add eMMC node for rk3288-vyasa ARM: dts: rockchip: Support UHS mode for SD card on phyCORE-RK3288 RDK ARM: dts: rockchip: Fix supply node for card's power on phycore som ARM: dts: rockchip: add "rockchip,rk3228-grf" compatible for rk322x grf node ARM: dts: rockchip: drop veyron's nonstandard 'backlight-boot-off'
-
- 27 Mar, 2018 39 commits
-
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Pull "mvebu SPDX dt for 4.17: from Gregory CLEMENT: convert to the SPDX-License-Identifier for the Kirkwood and the Armada based device tree files. Compared to the series submitted most of the patch have been squashed: the result is grouped by SoC, boards, type of licenses and the patches that were explicitly acked on the mailing list. * tag 'mvebu-dt-4.17-spdx' of git://git.infradead.org/linux-mvebu: arm: dts: kirkwood*.dts: use SPDX-License-Identifier for board using GPL-2.0+ arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0+/MIT arm: dts: kirkwood*.dts: use SPDX-License-Identifier for boards using GPL-2.0 arm: dts: armada-385-turris-omnia: use SPDX-License-Identifier arm: dts: armada-385-db-ap: use SPDX-License-Identifier arm: dts: armada-388-rd: use SPDX-License-Identifier arm: dts: armada-xp-db-xc3-24g4xg: use SPDX-License-Identifier arm: dts: armada-xp-db-dxbc2: use SPDX-License-Identifier arm: dts: armada-370-db: use SPDX-License-Identifier arm: dts: armada-*.dts: use SPDX-License-Identifier for most of the Armada based board arm: dts: armada-xp-98dx: use SPDX-License-Identifier for prestara 98d SoCs arm: dts: armada-*.dtsi: use SPDX-License-Identifier for most of the Armada SoCs
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Pull "mvebu dt for 4.17 (part 2)" from Gregory CLEMENT: - add SFP module support on the clearfog (Armada 388 based board) - disable internal RTC node for Linksys boards (Armada 38x based boards) * tag 'mvebu-dt-4.17-2' of git://git.infradead.org/linux-mvebu: ARM: dts: armada388-clearfog: add SFP module support ARM: dts: armada-385-linksys: Disable internal RTC
-
Gregory CLEMENT authored
Follow the recent trend for the license description Acked-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
Gregory CLEMENT <gregory.clement@bootlin.com>
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.htmlAcked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description Acked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Acked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Cc: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by:
Maxime Ripard <maxime.ripard@bootlin.com> Acked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Cc: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by:
Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Acked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.htmlAcked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.html Cc: Chris Packham <chris.packham@alliedtelesis.co.nz> Acked-by:
-
Gregory CLEMENT authored
Follow the recent trend for the license description, and also fix the wrongly stated X11 to MIT. As already pointed on the DT ML, the X11 license text [1] is explicitly for the X Consortium and has a couple of extra clauses. The MIT license text [2] is actually what the current DT files claim. [1] https://spdx.org/licenses/X11.html [2] https://spdx.org/licenses/MIT.htmlAcked-by:
-
Russell King authored
Add SFP module support for Clearfog using the SFP phylink support. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Tested-by:
Andrew Lunn <andrew@lunn.ch> Tested-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Hauke Mehrtens authored
The internal RTC does not work correctly on these Linksys boards based on Marvell SoCs. For me it only shows Wed Dec 31 23:59:59 1969 and for others it is off by 3 minutes in 10 minutes running, this was reported by multiple users. On the Linksys Mamba device the device tree comment says that no crystal is connected to the internal RTC, this is probably also true for the other devices. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'imx-dt64-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt Pull "Freescale arm64 device tree fixups for 4.17" from Shawn Guo: - It reverts a couple of patches that "fix" DTC warnings on IFC memory controller in a wrong way. We will start over agagin to address the DTC warnings later. * tag 'imx-dt64-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: Revert "dt-bindings: ifc: Fix the unit address format in the examples" Revert "arm64: dts: fsl: fix ifc simple-bus unit address format warnings"
-
Arnd Bergmann authored
Merge tag 'socfpga_dts_for_v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt Pull "SoCFPGA DTS updates for v4.17" from Dinh Nguyen: - Fix GIC PPI warning - Stratix10 platform updates - Disable over-current for Arria10 devkit - Enable watchdog timer * tag 'socfpga_dts_for_v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm: dts: socfpga: fix GIC PPI warning arm64: dts: stratix10: disable false USB overcurrent on devkit arm64: dts: stratix10: enable watchdog timer on the S10 devkit
-
Arnd Bergmann authored
Merge tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Pull "Second set of dts changes for omap variants for v4.17" from Tony Lindgren: This series of patches configures few new drivers and adds omap5 specific nodes: - Enable USB OTG mode for xhci on am437x - A series of changes to configure aux control module instance on omap5 mostly to get the audio clocks configured - A series of changes to update droid4 for MDM6600 modem USB PHY and UART1 pinctrl * tag 'omap-for-v4.17/dt-pt2-signed' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: omap4-droid4: Configure uart1 pins ARM: dts: omap4-droid4: Configure MDM6600 USB PHY ARM: dts: omap4-droid4: Fix USB PHY port naming ARM: dts: omap5-board-common: Add phandle for mclk clock for twl6040 ARM: dts: omap5: add fref_xtal_ck support ARM: dts: omap5: add support for control module wkup pad config dt-bindings: omap5: ctrl: Support for control module wkup pad config ARM: dts: am43xx: Enable dual-role mode for USB1
-
Arnd Bergmann authored
Merge tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner H3/H5 changes for 4.17" from Maxime Ripard: Here is our usual bunch of changes to the common DTSI shared between arm and arm64, and their associated device trees. Even though the diffstat is quite big, it's been mostly just cleanups. The big feature is that the HDMI is now suported on H3 and H5 boards. * tag 'sunxi-h3-h5-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: allwinner: H5: Add Xunlong Orange Pi Zero Plus ARM: dts: sun8i-h3: Add Mali node ARM64: dts: sun50i: h5: Enable HDMI output on H5 boards ARM: dts: sun8i: h3: Enable HDMI output on H3 boards ARM: dts: sunxi: h3/h5: Add HDMI pipeline ARM: dts: sun8i: h2-plus: remove unnecessary mmc1_pins node ARM: dts: sunxi: h3-h5: rename mmc0_pins_a and mmc1_pins_a ARM: dts: sunxi: h3-h5: Move pinctrl of mmc1 from dts to dtsi ARM: dts: sunxi: h3-h5: Move pinctrl of mmc0 from dts to dtsi ARM: dts: sunxi: h3-h5: remove mmc0 card detection pin from pinctrl ARM: dts: sun8i: h2+: add support for Banana Pi M2 Zero board ARM: dts: sunxi: Switch MMC nodes away from cd-inverted property ARM: dts: nanopi-neo-air: Add WiFi / eMMC
-
Arnd Bergmann authored
Merge tag 'sunxi-dt64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner arm64 DT changes for 4.17" from Maxime Ripard: We've had for this release a pretty good progress on the arm64 front as well: - The A64 now has SPDIF support - The H6 is now supported (even though at an early stage) - The TERES-I laptop from Olimex has seen some early support as well * tag 'sunxi-dt64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm64: dts: allwinner: a64: Add support for TERES-I laptop arm64: dts: allwinner: a64: add simplefb for A64 SoC arm64: dts: allwinner: a64: Add watchdog arm64: dts: allwinner: a64: Add i2c0 pins arm64: allwinner: h6: add support for Pine H64 board arm64: allwinner: h6: add the basical Allwinner H6 DTSI file arm64: dts: sunxi: Switch MMC nodes away from cd-inverted property arm64: dts: allwinner: a64: Add DAI nodes arm64: dts: allwinner: a64: Add SPDIF to the Pine64 arm64: dts: allwinner: a64: Add SPDIF to the A64 arm64: dts: allwinner: a64: Add the SPDIF block and pin
-
Arnd Bergmann authored
Merge tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner DT changes for 4.17" from Maxime Ripard: There is a bunch of significant additions for this release cycle: - The A83t now has HDMI support - The A80 finally has SMP support (without PSCI, unfortunately) - The A80 has preliminary display support And also: - a number of boards based on old (A10, A20) SoCs now have the HDMI support enabled. - The display frontend is enabled on the A33, allowing to use it for hardware display scaling - New boards: Olimex A20-SOM204 variants * tag 'sunxi-dt-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (39 commits) ARM: dts: sun9i: cubieboard4: Enable VGA display output ARM: dts: sun9i: Add pinmux settings for LCD0 RGB888 output. ARM: dts: sun9i: Add device nodes for documented display pipelines for A80 ARM: dts: sun8i: reference tablet design: Enable PMIC power supplies ARM: dts: sun8i: a33: Enable A33 internal audio codec on A33-OLinuXino ARM: dts: sun8i: a33: Enable PMIC power supplies on A33-OLinuXino ARM: dts: sun8i: a33: Drop sunxi-common-regulators.dtsi for A33-OLinuXino ARM: dts: sun8i: a33: Drop GPIO pinmux settings for A33-OLinuXino ARM: dts: sun9i: Add enable-method for SMP support for the A80 SoC ARM: dts: sun8i: h3: Add eMMC for NanoPi M1 Plus ARM: dts: sun8i: a711: set regulator for each cluster of CPUs ARM: dts: sun8i: a83t: add stable OPP tables and CPUfreq ARM: dts: sun8i: a83t: add cpu0 and cpu100 labels ARM: dtsi: axp81x: remove IP name from DT node name ARM: dtsi: sun8i: a711: enable battery power supply subnode ARM: dtsi: axp81x: add battery power supply subnode ARM: dtsi: axp81x: add node for ADC ARM: dtsi: axp22x: add node for ADC ARM: dtsi: axp209: add node for ADC ARM: dts: sun7i: Enable HDMI support on the Orange Pi mini ...
-
Arnd Bergmann authored
Merge tag 'at91-ab-4.17-dt2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt Pull "AT91 DT for 4.17 #2" from Alexandre Belloni: Pinctrl fixes, the UART pullups were discussed back in 2016. * tag 'at91-ab-4.17-dt2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91sam9260: pullup rx on usart0 ARM: dts: at91rm9200: pullup rx on uart0 ARM: dts: at91: fixes uart pinctrl, set pullup on rx, clear pullup on tx ARM: dts: at91: at91sam9g25: fix mux-mask pinctrl property
-
Arnd Bergmann authored
Merge tag 'amlogic-dt-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 32-bit DT updates for v4.17" from Kevin Hilman: - odroid-c1: add microSD, ethernet, USB reset - add reset controller - fix requesting GPIOs greater than GPIOZ_3 * tag 'amlogic-dt-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM: dts: meson8b: the CBUS GPIO controller only has 83 GPIOs ARM: dts: meson8b-odroidc1: add microSD support ARM: dts: meson8b: add the I2C clocks ARM: dts: meson8b-odroidc1: ethernet support ARM: dts: meson8b: extend ethernet controller description ARM: dts: meson8: add the USB reset line ARM: dts: meson8: add the reset controller ARM: dts: meson8b: grow the reset controller memory zone
-
Arnd Bergmann authored
Merge tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Pull "Qualcomm Device Tree Changes for v4.17" from Andy Gross: * Add initial DTS file for Samsung Galaxy S5 * Fixups for castor touchscreen node * Fixup QS600 at23 manufacturer * Add XOADC and IIO to APQ8064 * tag 'qcom-dts-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux: ARM: dts: msm8974: castor: Fix typo and add startup delay in touchscreen node ARM: dts: add XOADC and IIO HWMON to APQ8064 ARM: dts: use 'atmel' as at24 manufacturer for qcom-apq8064-cm-qs600 ARM: dts: qcom: Add initial DTS file for Samsung Galaxy S5 phone
-
Arnd Bergmann authored
Merge tag 'qcom-arm64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux into next/dt Pull "Qualcomm ARM64 Updates for v4.17" from Andy Gross: * Fix GIC_CPU_MASK_SIMPLE and SPI5 config on MSM8996 * Add SDM845 and kryo385 documentation * Add MSM8916 cooling maps, cpu frequency scaling, APCS, and A53 PLL * Switch APCS to use mailbox on MSM8916 * Add rmtfs-mem on MSM8996 * tag 'qcom-arm64-for-4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/agross/linux: arm64: dts: qcom: Fix SPI5 config on MSM8996 dt-bindings: qcom: Add SDM845 bindings dt-bindings: arm: Document kryo385 cpu arm64: dts: msm8916: Add cpu cooling maps arm64: dts: msm8996: Add rmtfs sharedmem node arm64: dts: qcom: msm8916: Add CPU frequency scaling support arm64: dts: qcom: msm8916: Add clock properties to the APCS node arm64: dts: qcom: msm8916: Probe the APCS mailbox driver arm64: dts: qcom: msm8916: Add msm8916 A53 PLL DT node arm64: dts: msm8996: Fix wrong use of GIC_CPU_MASK_SIMPLE()
-
Viresh Kumar authored
The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of gpio-fan cooling device is found by referring to the "gpio-fan,speed-map" instead. Remove the unused properties from the gpio-fan node. Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
Viresh Kumar authored
The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of gpio-fan cooling device is found by referring to the "gpio-fan,speed-map" instead. Remove the unused properties from the gpio-fan node. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Viresh Kumar authored
The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Remove the unused properties from the CPU nodes. Signed-off-by:
-
Arnd Bergmann authored
Merge tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/dt Pull "DTS changes for RealView+Versatile" from Linus Walleij: This augments the RealView and Versatile device trees to properly define the VGA and panel connectors in preparation for DRM. * tag 'armsoc-versatile-drm-dts' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator: ARM: dts: Augment panel setting for Versatile ARM: dts: Add Versatile IB2 device tree ARM: dts: Augment VGA connector bridge on Realview PBX ARM: dts: Augment VGA connector bridge on Realview EB ARM: dts: Augment VGA connector bridge on PB1176 ARM: dts: Augment VGA connector bridge on PB11MPcore
-
Arnd Bergmann authored
Merge tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/dt Pull "Amlogic 64-bit DT updates for v4.17" from Kevin Hilman: - AXG: add/enable UART_A, I2C, RMII, system controller, HW RNG - accept MAC from u-boot environment - misc. fixes * tag 'amlogic-dt64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic: ARM64: dts: meson-gx: make efuse read-only ARM64: dts: meson: bump mali450 clk to 744MHz meson-gx-socinfo: Add package id for S905H ARM64: dts: meson-gxbb-wetek: add a wetek specific dtsi to cleanup hub and play2 ARM64: dts: meson: reduce odroid-c2 eMMC maximum rate ARM64: dts: amlogic: Convert to new-style SPDX license identifiers ARM64: dts: meson-axg: fix pwm_AO_cd compatible ARM64: dts: meson-axg: add sec_AO system controller ARM64: dts: meson: accept MAC addr from u-boot environment ARM64: dts: meson s905x: accept MAC addr from u-boot environment ARM64: dts: meson-axg: enable the UART_A controller ARM64: dts: meson-axg: complete the pinctrl info for UART_AO_A ARM64: dts: meson-axg: uart: Add the pinctrl info description ARM64: dts: meson-axg: uart: drop legacy compatible name from EE UART ARM64: dts: meson-axg: add RMII pins for ethernet controller ARM64: dts: meson-axg: enable I2C Master-1 for the audio speaker ARM64: dts: meson-axg: describe pin DT info for I2C controller ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC ARM64: meson-axg: enable hardware rng
-
git://git.infradead.org/linux-mvebuArnd Bergmann authored
Pull "mvebu dt64 for 4.17 (part 2)" from Gregory CLEMENT: - Add registers clock for all the peripheral nodes that had been yet converted for CP110 (Armada 7K/8K) - Document URL for schematic for the EspressoBin (Armada 3720) * tag 'mvebu-dt64-4.17-2' of git://git.infradead.org/linux-mvebu: arm64: dts: armada-3720-espressobin: Document URL for schematic ARM64: dts: marvell: armada-cp110: Add registers clock for the PCIe nodes ARM64: dts: marvell: armada-cp110: Add registers clock for the NAND node ARM64: dts: marvell: armada-cp110: Add registers clock for the crypto node ARM64: dts: marvell: armada-cp110: Add registers clock for the trng node ARM64: dts: marvell: armada-cp110: Add registers clock for XOR engine nodes ARM64: dts: marvell: armada-cp110: Add registers clock for USB host nodes
-
Arnd Bergmann authored
Merge tag 'v4.16-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "ARM: mediatek: dts64 updates for v4.16-next" from Matthias Brugger: - mt2712e add auxadc devcie mt7622: - fix clock bindings description - add nodes for mmc, usb, SATA, PCI, ethernet, cpufreq, PMIC mt6380, pinctrl, scpsys and clock devices * tag 'v4.16-next-dts64' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm64: dts: mt2712: Add auxadc device node. dt-bindings: clock: mediatek: add missing required #reset-cells arm64: dts: mt7622: add mmc related device nodes arm64: dts: mt7622: add usb device nodes arm64: dts: mt7622: add SATA device nodes arm64: dts: mt7622: add PCIe device nodes arm64: dts: mt7622: add ethernet device nodes arm64: dts: mt7622: add flash related device nodes arm64: dts: mt7622: add SoC and peripheral related device nodes arm64: dts: mt7622: turn uart0 clock to real ones arm64: dts: mt7622: add cpufreq related device nodes arm64: dts: mt7622: add PMIC MT6380 related nodes arm64: dts: mt7622: add pinctrl related device nodes arm64: dts: mt7622: add power domain controller device nodes arm64: dts: mt7622: add clock controller device nodes
-
Arnd Bergmann authored
Merge tag 'v4.16-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into next/dt Pull "ARM: mediatek: dts32 updates for v4.16-next" from Matthias Brugger: mt7623: - fix style issues of the dts - add cpu clock properties - add PCI controller - add mt7623 reference board banapi-r2: - enable missing uarts - fix regulator for mmc - fix USB initialization * tag 'v4.16-next-dts32' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: arm: dts: mt7623: add PCIe related nodes arm: dts: mt7623: use - instead of _ in DT node name arm: dts: mt7623: remove useless property pinctrl-names at node switch@0 arm: dts: mt7623: add related clock properties to cpu[1-3] nodes arm: dts: mt7623: enable three available UARTs on bananapi-r2 arm: dts: mt7623: fix the regulators mmc should use on bananapi-r2 arm: dts: mt7623: fix USB initialization fails on bananapi-r2 dt-bindings: arm: mediatek: add support for more mt7623 reference boards
-
Arnd Bergmann authored
Merge tag 'samsung-dt-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/dt Pull "Samsung DTS ARM changes for v4.17, part two" from Krzysztof Kozłowski: 1. Fix audio on Exynos5250 Chromebook Snow. 2. Enable HDMI audio Chromebook Snow, Peach Pit and Peach Pi. 3. Fix debounce of "OK" key on Midas (Trats2, Galaxy S3) boards. * tag 'samsung-dt-4.17-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Add #sound-dai-cells property to exynos5250 i2s nodes ARM: dts: exynos: Fix "debounce-interval" property misspelling in Midas ARM: dts: exynos: Enable HDMI audio support on Peach Pi ARM: dts: exynos: Enable HDMI audio support on Peach Pit ARM: dts: exynos: Enable HDMI audio on Snow Chromebook ARM: dts: exynos: Add missing clock and DAI properties to the max98095 node in Snow Chromebook ARM: dts: exynos: Add audio clocks configuration for Snow Chromebook ARM: dts: exynos: Add #sound-dai-cells property to hdmi node in exynos5250.dtsi
-
Arnd Bergmann authored
Merge tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Updates for v4.17" from Simon Horman: * Silk board with R-Car E2 (r8a7794) SoC - Add r1ex24002 EEPROM to DT Magnus Damm says "Extend the Silk board support to include U14 which is an I2C based EEPROM hooked up to the I2C1 bus." - Add GPIO keys to DT Magnus Damm says "Extend the Silk board support to include SW3, SW4, SW6 and SW12. They are all connected via GPIO lines and handled by the gpio-keys driver" * Marzen board with R-Car H1 (r7a7779) SoC - Add SDHI0 VCCQ Regulator Magnus Damm says "Add support for the on-board voltage regulator hooked up to GPIO3_20 on r8a7779 Marzen. The board schematics describes the regulator as U4 TPS2110A. Input wise, U4 has D0 fixed to ground, D1 tied to GPIO3_20 while IN1 is fixed to 3.3V and IN2 is fixed to 1.8V. OUT goes to the pull-ups for the data pins of SDHI0." * Porter board with R-Car M3W (r8a7791) SoC - Fix HDMI output routing Laurent Pinchart says "The HDMI encoder is connected to the RGB output of the DU, which is port@0, not port@1." * iWave Systems RZ/G1E SODIMM System On Module (iW-RainboW-G22M-SM) and iWave Systems RZ/G1M Qseven System On Module (iW-RainboW-G20M-Qseven) - Enable cmt0 * Stout board with R-Car H2 (r8a7790) SoC - Initial support * Lager board with R-Car H2 (r8a7790) SoC - Add CEC clock for HDMI transmitter Niklas Söderlund says "The adv7511 on the Lager board has a 12 MHz fixed clock for the CEC block. Specify this in the dts to enable CEC support." - Move cec_clock to root node By definition nodes without a bus address do not belong on the bus * kzm9d board with EMMA Mobile EV2 (EMEV2) SoC - Fix "debounce-interval" property misspelling * RZ/G1M (r8a7743) and RZ/G1H (r8a7745) SoCs - Add IPMMU DT nodes - Add VSP support * R-Car Gen2 boards - Use I2C demuxer for This allows run-time switching between alternate I2C IP blocks * R-Car Gen2 and RZ/G1 SoCs - Clean up DT files to ease future maintenance + add soc node for IP attached to the bus + sort subnodes of soc and root node + consistently use single space after = * R-Car H2 (r8a7790), M3-W (r8a7791) and M3-N (r7a7793) SoCs - Reduce size of thermal registers According to the "User's Manual: Hardware" v2.00 the registers at base 0xe61f0000 extend to an offset of 0x10, rather than 0x14 which is the case on the r8a73a4 (R-Mobile APE6). This should not have any runtime affect as mapping granularity is PAGE_SIZE. * tag 'renesas-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (47 commits) ARM: dts: silk: Add GPIO keys to DT ARM: dts: silk: Add r1ex24002 EEPROM to DT ARM: dts: marzen: Add SDHI0 VCCQ Regulator ARM: dts: stout: Initial r8a7790 Stout board support ARM: dts: lager: Move cec_clock to root node ARM: dts: kzm9d: Fix "debounce-interval" property misspelling ARM: dts: gose: use demuxer for I2C4 ARM: dts: gose: use demuxer for I2C2 ARM: dts: silk: use demuxer for I2C1 ARM: dts: alt: use demuxer for I2C1 ARM: dts: porter: use demuxer for I2C2 ARM: dts: koelsch: use demuxer for I2C4 ARM: dts: koelsch: use demuxer for I2C2 ARM: dts: lager: use demuxer for IIC3/I2C3 ARM: dts: lager: use demuxer for IIC2/I2C2 ARM: dts: r8a7745: Add VSP support ARM: dts: r8a7743: Add VSP support ARM: dts: r8a7745: Add IPMMU DT nodes ARM: dts: r8a7743: Add IPMMU DT nodes ARM: dts: r8a7745: sort subnodes of soc node ...
-
Arnd Bergmann authored
Merge tag 'renesas-dt-bindings-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM Based SoC DT Bindings Updates for v4.17" from Simon Horman: * Document the bindings for: - R-Car V3H (r8a77980) SoC - Condor board with V3H (r8a77980) SoC - Stout (ADAS Starterkit) board with R-Car H2 (r8a7790) SoC - R-Car M3-N (r8a77965) SoC - Salvator-X and Salvator-XS boards with R-Car M3-N (r8a77965) SoC * Document that Armadillo-800 is compatibie with R-Mobile A1 (r8a7740) SoC * Document part numbers of Wheat and V3MSK boards * tag 'renesas-dt-bindings-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: dt-bindings: arm: Document Renesas R-Car M3-N-based Salvator-X board dt-bindings: arm: Document Renesas R-Car M3-N-based Salvator-XS board dt-bindings: arm: Document Renesas V3MSK and Wheat board part numbers dt-bindings: arm: Document SoC compatible value for Armadillo-800 EVA dt-bindings: arm: Document R-Car M3-N SoC DT bindings dt-bindings: arm: Document Renesas H2-based Stout DT bindings dt-bindings: arm: document Condor board bindings dt-bindings: arm: document R8A77980 SoC bindings
-
Arnd Bergmann authored
Merge tag 'renesas-arm64-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt Pull "Renesas ARM64 Based SoC DT Updates for v4.17" from Simon Horman: * R-Car Gen3 boards and SoCs - Make phy-mode of EtherAVB a board-specific property. The SoC DTs file now uses "rgmii" and boards override this with "rgmii-txid" as appropriate. Previously "rgmii-txid" was used in SoC DTs but this did not describe that more sophiticated functionality is a board rather than SoC property. * Condor board with R-Car V3H (r8a77980) SoC - Initial upstream support * Condor board with R-Car V3H (r8a77980) SoC - Initial upstream support * R-Car D3 (r8a77995) - Add I2C nodes and then describing the PCA9654 I/O expander connected to the I2C0 bus. * Eagle board with R-Car V3M (r8a77970) SoC - Enable PFC support for configuring SCIF0 pins This uses PFC support added to the V3M DT - Describe EtherAVB PHY IRQ This uses support for GPIO added to the V3M DT - Enable I2C0 support Sergei Shtylyov says "The I2C0 bus is populated by ON Semiconductor PCA9653 I/O expander and Analog Devices ADV7511W HDMI transmitter (but we're only describing the former chip now)." * R-Car V3M (r8a77970) SoCs - Add PFC support - Describe GPIO devices - Describe I2C devices - Srt subnodes of root node alphabetically to eas future maintence overhead * Draak board with R-Car D3 (r8a77995) SoC - Enable SDHI2 Wolfram Sang says "The single SDHI controller is connected to eMMC." - Enable DU Kieran Bingham says "Enable the DU, providing only the VGA output for now." * R-Car D3 (r8a77995) and V3M (r8a77970) SoCs - Move nodes which have no reg property out of bus By deffinition the bus only has hardware with an address on the bus - Remove non-existing STBE region from EtherAVB Stream Buffer for EtherAVB-IF (STBE) is not present on these SoCs * R-Car D3 (r8a77995) SoC - Add FCPV, VSP and DU support Kieran Bingham says "The r8a77995-d3 platform supports 3 VSP instances. One VSPBS can be used as a dual-input image blender, while two VSPD instances can be utilised as part of a display (DU) pipeline. Add support for these, along with their required FCPV nodes." * Salvator-X and Salvator-XS boards with R-Car Gen3 SoCs - Add GPIO extender This is a basis for follow-up work to configure the GPIOs of the extender * Salvator-X and Salvator-XS board with R-Car M3-N (r8a77965) SoC - Initial upstream support * R-Car H3 (r8a7795) and M3-W (r8a7796) SoCs - Add OPPs table for cpu devices This, along with recently upstreamed Z and Z2 clock support allows use of CPUFreq with both A57 and A53 CPUs. - Add thermal cooling management Allows the use of CPUFreq as a cooling device on A57 CPUs - Correct register size of thermal node Niklas Söderlund says "To be able to read fused calibration values from hardware the size of the register resource of TSC1 needs to be incremented to cover one more register which holds the information if the calibration values have been fused or not. Instead of increasing TSC1 size to the value from the datasheet update all TSC's size to the smallest granularity of the address decoder circuitry" - Fix register mappings on VSPs Kieran Bingham says "The VSPD includes a CLUT on RPF2. Ensure that the register space is mapped correctly to support this." * R-Car H3 (r8a7795) SoC - Move SCIF node into alphabetical order to ease future maintenance overhead - Add IPMMU-PV1 device node This resolves an oversight when IPMMU nodes were added to the H3 DT. All IPMMU devices should now be described in DT. - Add missing SYS-DMAC2 dmas Geert Uytterhoeven says "On R-Car H3, on-chip peripheral modules that can make use of DMA are wired to either SYS-DMAC0 only, or to both SYS-DMAC1 and SYS-DMAC2. Add the missing DMA properties pointing to SYS-DMAC2 for HSCIF[0-2], SCIF[0125], and I2C[0-2]. These were initially left out because early firmware versions prohibited using SYS-DMAC2. This restriction has been lifted in IPL and Secure Monitor Rev1.0.6 (released on Feb 25, 2016)." * tag 'renesas-arm64-dt-for-v4.17' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (69 commits) arm64: dts: renesas: v3msk: add SCIF0 pins arm64: dts: renesas: r8a7795: Add missing SYS-DMAC2 dmas arm64: dts: renesas: r8a7795: Add IPMMU-PV1 device node arm64: dts: renesas: r8a77970: sort subnodes of root node alphabetically arm64: dts: renesas: eagle: add I2C0 support arm64: dts: renesas: r8a77970: add I2C support arm64: dts: renesas: r8a77965-salvator-xs: Add SoC name to file header arm64: dts: renesas: r8a77965: Add EtherAVB device node arm64: dts: renesas: r8a77970: Set EtherAVB phy mode to "rgmii" arm64: dts: renesas: r8a77995: Set EtherAVB phy mode to "rgmii" arm64: dts: renesas: r8a7795: Set EtherAVB phy mode to "rgmii" arm64: dts: renesas: r8a7796: Set EtherAVB phy mode to "rgmii" arm64: dts: renesas: v3msk: Override EtherAVB phy-mode arm64: dts: renesas: eagle: Override EtherAVB phy-mode arm64: dts: renesas: draak: Override EtherAVB phy-mode arm64: dts: renesas: ulcb: Override EtherAVB phy-mode arm64: dts: renesas: salvator-common: Override EtherAVB phy-mode arm64: dts: renesas: r8a77965: Add INTC-EX device node arm64: dts: renesas: r8a77965: Add IIC-DVFS device node arm64: dts: renesas: Add support for Salvator-XS with R-Car M3-N ...
-
Arnd Bergmann authored
Merge tag 'tegra-for-4.17-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt Pull "arm64: tegra: Device tree changes for v4.17-rc1" from Thierry Reding: Adds initial support for the P2972-0000 development board based on Tegra194 and enables the AHCI controller on Jetson TX1. * tag 'tegra-for-4.17-arm64-dt' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Enable AHCI on Jetson TX1 arm64: tegra: Add SATA node for Tegra210 arm64: tegra: Add device tree for the Tegra194 P2972-0000 board arm64: tegra: Add Tegra194 chip device tree
-
