- 14 Jul, 2023 17 commits
-
-
Caleb Connolly authored
The c630 exposes its debug UART via a connector on the PCB, enable it. Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20230627-c630-uart-and-1p2-reg-v2-2-496b581935c1@linaro.orgSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Caleb Connolly authored
The VCC and VCCA supplies of the DSI<->eDP bridge are derived from vreg_l2a_1p2 and controlled by a GPIO on the PMIC. Add the regulator here so Linux can control it. Signed-off-by:
-
Konrad Dybcio authored
Add the missing property to fix the dt checker warning: qcom/sc8180x-primus.dtb: l3-cache: 'cache-unified' is a required property Fixes: 8575f197 ("arm64: dts: qcom: Introduce the SC8180x platform") Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-7-254ae8642e69@linaro.orgSigned-off-by:
-
Konrad Dybcio authored
Add the missing OVP interrupt. This fixes the schema warning: wled@d800: interrupt-names: ['short'] is too short Fixes: 37aa540c ("arm64: dts: qcom: pmi8994: Add WLED node") Signed-off-by:
-
Konrad Dybcio authored
Add the missing OVP interrupt. This fixes the schema warning: wled@d800: interrupt-names: ['short'] is too short Fixes: 0d97fdf3 ("arm64: dts: qcom: Add configuration for PMI8950 peripheral") Signed-off-by:
-
Konrad Dybcio authored
Add the missing short interrupt. This fixes the schema warning: wled@d800: interrupt-names: ['ovp'] is too short Fixes: 7b56a804 ("arm64: dts: qcom: pm660l: Add WLED support") Signed-off-by:
-
Konrad Dybcio authored
Add the missing short interrupt. This fixes the schema warning: wled@d800: interrupt-names: ['ovp'] is too short Fixes: fe508ced ("arm64: dts: qcom: pm6150l: Add wled node") Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20230626-topic-bindingsfixups-v1-3-254ae8642e69@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
Panel bindings (boe,nv133fhm-n61) require supply which here actually can be turned on/off via GPIO control: sdm850-lenovo-yoga-c630.dtb: panel: 'power-supply' is a required property Signed-off-by:
-
Stephan Gerhold authored
Rather than having the RPM GLINK channels as the only child of a dummy top-level rpm-glink node, switch to representing the RPM as remoteproc like all the other remoteprocs (modem DSP, ...). This allows assigning additional subdevices to it like the MPM interrupt-controller or rpm-master-stats. Tested-by: Konrad Dybcio <konrad.dybcio@linaro.org> # SM6375 Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.netSigned-off-by:
-
Stephan Gerhold authored
Rather than having the RPM SMD channels as the only child of a dummy SMD node, switch to representing the RPM as remoteproc like all the other remoteprocs (WCNSS, modem DSP). This allows assigning additional subdevices to it like the MPM interrupt-controller or rpm-master-stats. Reviewed-by:
-
Praveenkumar I authored
Add cpu cooling maps for passive trip points. The cpu cooling device states are mapped to cpufreq based scaling frequencies. Signed-off-by:
Praveenkumar I <quic_ipkumar@quicinc.com> Link: https://lore.kernel.org/r/20230713083101.971525-2-quic_ipkumar@quicinc.comSigned-off-by:
-
Dmitry Baryshkov authored
Add support for the MDSS cfg-cpu bus vote on the SM8450 platform. Signed-off-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20230712121145.1994830-9-dmitry.baryshkov@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
gpio-keys,wakeup is a deprecated property: m8250-sony-xperia-edo-pdx206.dtb: gpio-keys: key-camera-focus: Unevaluated properties are not allowed ('gpio-key,wakeup' was unexpected) Fixes: a422c6a9 ("arm64: dts: qcom: sm8250-edo: Rectify gpio-keys") Signed-off-by: -
Konrad Dybcio authored
Add and assign RPM regulators coming from PM2250. Signed-off-by:
-
Konrad Dybcio authored
ChromeOS folks reported that bwmon is too slow and getting rid of statically defined CPUFREQ-based votes (effectively floor votes because of how opp-peak-kBps is interpreted), has a major performance impact in some common applications. Bring them back until MEMLAT support is introduced. This is a partial revert of the commit referenced in the fixes tag. Fixes: adc16b84 ("arm64: dts: qcom: sc7180: Hook up BWMONs") Reported-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Konrad Dybcio authored
Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm6350. There are 3 more NPU BWMONs, but these are skipped for now. Signed-off-by:
-
Konrad Dybcio authored
Add the CPU and LLC BWMONs (skip the NPU ones for now) on sm8250. LPDDR4X levels are skipped, as LPDDR5 seems more popular with SM8250 and voting for inexistent levels doesn't uptick the bus frequency, which results in no increased bandwidth, which results in bwmon deciding we shouldn't go higher.. you see the point! Signed-off-by:
-
- 13 Jul, 2023 1 commit
-
-
Dmitry Baryshkov authored
Turn CBF into the interconnect provider. Scale CBF frequency (bandwidth) according to CPU frequencies. Reviewed-by:
Yassine Oudjana <y.oudjana@protonmail.com> Signed-off-by:
-
- 10 Jul, 2023 22 commits
-
-
Konrad Dybcio authored
The SMMUs on SM8250 are cache-coherent. Mark them as such. Fixes: a89441fc ("arm64: dts: qcom: sm8250: add apps_smmu node") Fixes: 04a3605b ("arm64: dts: qcom: add sm8250 GPU nodes") Signed-off-by:
-
Konrad Dybcio authored
The PCIe hosts on SM8250 are cache-coherent. Mark them as such. Fixes: e53bdfc0 ("arm64: dts: qcom: sm8250: Add PCIe support") Signed-off-by:
-
Dmitry Baryshkov authored
Add thermal zones controlled through the ADC-TM (ADC thermal monitoring) PMIC interface. This includes several onboard sensors and the XO thermal sensor. Signed-off-by:
-
Dmitry Baryshkov authored
Declare the DIE_TEMP channels provided by PMICs. Use them to provide temperature reading for the spmi-temp-alarm thermal zones. Reviewed-by:
-
Dmitry Baryshkov authored
The 8450-HDK doesn't use PMR735B PMIC. Drop its inclusion to remove the warning during the HDK bootup. Fixes: 30464456 ("arm64: dts: qcom: sm8450-hdk: add pmic files") Reviewed-by:
Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by:
-
Dmitry Baryshkov authored
The commit b2de4313 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350") for the ADC TM (thermal monitoring device) have used the compatible string from the vendor kernel ("qcom,adc-tm7"). Use the proper compatible string that is defined in the upstream kernel ("qcom,spmi-adc-tm5-gen2"). Fixes: b2de4313 ("arm64: dts: qcom: pmk8350: Add peripherals for pmk8350") Reviewed-by:
-
Dmitry Baryshkov authored
The name of the thermal zone in pmr735b.dtsi (pmr735a-thermal) conflicts with the thermal zone in pmr735a.dtsi. Rename the thermal zone according to the chip name. Fixes: 6f3426b3 ("arm64: dts: qcom: pmr735b: add temp sensor and thermal zone config") Reviewed-by:
-
Dmitry Baryshkov authored
The name of the thermal zone in pm8350b.dtsi (pm8350c-thermal) conflicts with the thermal zone in pm8350c.dtsi. Rename the thermal zone according to the chip name. Fixes: 5c139929 ("arm64: dts: qcom: pm8350b: add temp sensor and thermal zone config") Reviewed-by:
-
Dmitry Baryshkov authored
The name of the thermal zone in pm8350.dtsi (pm8350c-thermal) conflicts with the thermal zone in pm8350c.dtsi. Rename the thermal zone according to the chip name. Fixes: 7a79b95f ("arm64: dts: qcom: pm8350: add temp sensor and thermal zone config") Reviewed-by:
-
Konrad Dybcio authored
The Kryo names (once again) turned out to be fake. The CPUs report: 0x412fd050 (CA55 r2p0) (0 - 3) 0x411fd410 (CA78 r1p1) (4 - 6) 0x411fd440 (CX1 r1p1) (7) Use the compatibles that reflect that. Fixes: b7e8f433 ("arm64: dts: qcom: Add basic devicetree support for SM8350 SoC") Signed-off-by:
-
Konrad Dybcio authored
The value was copypasted from 8150, but 8180 expects a different one. Confirmed with both downstream device tree and Windows DSDT, not tested on hardware (sorry, I don't have any). Fix it. Fixes: 8575f197 ("arm64: dts: qcom: Introduce the SC8180x platform") Signed-off-by:
-
Krzysztof Kozlowski authored
Add missing whitespace between node name/label and opening {. Signed-off-by: -
Konrad Dybcio authored
Add the missing interrupts that communicate the hardware-managed throttling to Linux. Fixes: ccbb3abb ("arm64: dts: qcom: sm8350: Add cpufreq node") Signed-off-by:
-
Konrad Dybcio authored
The present values look to have been copypasted from 8150 or 8180. Fix that. Fixes: 07ddb302 ("arm64: dts: qcom: sm8350: Add CPU topology and idle-states") Signed-off-by:
-
Konrad Dybcio authored
SM8350's cores can be shut off, without engaging full-on SoC-wide power collapse. Add the missing idle state to allow for that. Signed-off-by:
-
Komal Bajaj authored
Add reserve gpios for QRU1000 IDP platform. These gpios are needed for modem subsystem. Signed-off-by:
Komal Bajaj <quic_kbajaj@quicinc.com> Reviewed-by:
-
Komal Bajaj authored
Add reserve gpios for QDU1000 IDP platform. These gpios are needed for modem subsystem. Signed-off-by:
-
Krzysztof Kozlowski authored
The DTS code coding style expects exactly one space before and after '=' sign. Signed-off-by:
-
Konrad Dybcio authored
The RPMCC node should be fed a reference to the XO fixed clock. Do so. Signed-off-by:
Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/r/20230627-topic-98_rpmcc-v1-1-4024e43ad0fc@linaro.orgSigned-off-by:
-
Konrad Dybcio authored
UART6 is used for debug (routed via uSD pins) and UART9 is connected to the bluetooth chip. Set indexed aliases to make the GENI UART driver happy and route serial traffic through the debug uart by default. Fixes: 30a7f99b ("arm64: dts: qcom: Add support for SONY Xperia XZ2 / XZ2C / XZ3 (Tama platform)") Signed-off-by:
Marijn Suijten <marijn.suijten@somainline.org> Link: https://lore.kernel.org/r/20230627-topic-tama_uart-v1-1-0fa790248db8@linaro.orgSigned-off-by:
-
Konrad Dybcio authored
The interrupt line was previously not described. Take care of that. Fixes: 1e39255e ("arm64: dts: msm8996: Add device node for qcom,dwc3") Signed-off-by:
-
Konrad Dybcio authored
'pin-switch-delay-us' is not used anywhere in the mainline kernel. Drop it. Signed-off-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20230627-topic-more_bindings-v1-4-6b4b6cd081e5@linaro.orgSigned-off-by:
-
