There are some controllers which support playback only or
capture only. so, make it optional. and initial capability
by 'dma-names' of DT.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950562-14281-4-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Mark Brown <broonie@kernel.org>

- DSP_A: PCM delay 1 bit mode, L data MSB after FRM LRC
- DSP_B: PCM no delay mode, L data MSB during FRM LRC
Signed-off-by: Xiaotan Luo <lxt@rock-chips.com>
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950562-14281-3-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch documents reset property for i2s.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1629950562-14281-2-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Mark Brown <broonie@kernel.org>

API 'set_fmt' maybe called when PD is off, in the situation,
any register access will hang the system. so, enable PD
before r/w register.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-4-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch changes dma data burst from 4 to 8 to improve
data transfer efficiency.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-3-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Mark Brown <broonie@kernel.org>

MCLK maybe not precise as required because of PLL,
but which still can be used and no side effect. so,
using DIV_ROUND_CLOSEST instead div.

e.g.

set mclk to 11289600 Hz, but get 11289598 Hz.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-2-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for set bclk ratio from machine driver.
Signed-off-by: Sugar Zhang <sugar.zhang@rock-chips.com>
Link: https://lore.kernel.org/r/1629950520-14190-1-git-send-email-sugar.zhang@rock-chips.comSigned-off-by: Mark Brown <broonie@kernel.org>

The IRQ is explicitly optional, so use platform_get_irq_optional() and
avoid platform_get_irq() logging a spurious error when trying to use the
thing in DMA mode.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Link: https://lore.kernel.org/r/c857f334e3c9e651e088b675b3938cb5f798b133.1629906123.git.robin.murphy@arm.comSigned-off-by: Mark Brown <broonie@kernel.org>

Change dev_err to dev_err_probe for no need print error message
when defer probe happens.

Fixes: 39f8405c ("ASoC: imx-rpmsg: Add machine driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1629875681-16373-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>

Fix the wrong button vol+ detection issue with some brand headsets
by fine tuning the threshold of button vol+ and SAR ADC button accuracy.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210825040346.28346-1-derek.fang@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Marking the two jack gpio as static fixes the following Sparse errors:
sound/soc/intel/boards/bytcr_rt5640.c:468:26: error: symbol 'rt5640_jack_gpio' was not declared. Should it be static?
sound/soc/intel/boards/bytcr_rt5640.c:475:26: error: symbol 'rt5640_jack2_gpio' was not declared. Should it be static?

Fixes: 9ba00856 ("ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210825122519.3364-1-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge branch 'for-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.15

This series of patches adds support for Mediatek AFE of MT8195 SoC.
Patches are based on broonie tree "for-next" branch.

Changes since v4:
  - removed sof related code

Changes since v3:
  - fixed warnings found by kernel test robot
  - removed unused critical section
  - corrected the lock protected sections on etdm driver
  - added DPTX and HDMITX audio support

Changes since v2:
  - added audio clock gate control
  - added 'mediatek' prefix to private dts properties
  - added consumed clocks to dt-bindins and adopted suggestions from Rob
  - refined clock usage and remove unused clock and control code
  - fixed typos

Changes since v1:
  - fixed some problems related to dt-bindings
  - added some missing properties to dt-bindings
  - added depency declaration on dt-bindings
  - fixed some warnings found by kernel test robot

Trevor Wu (11):
  ASoC: mediatek: mt8195: update mediatek common driver
  ASoC: mediatek: mt8195: support audsys clock control
  ASoC: mediatek: mt8195: support etdm in platform driver
  ASoC: mediatek: mt8195: support adda in platform driver
  ASoC: mediatek: mt8195: support pcm in platform driver
  ASoC: mediatek: mt8195: add platform driver
  dt-bindings: mediatek: mt8195: add audio afe document
  ASoC: mediatek: mt8195: add machine driver with mt6359, rt1019 and
    rt5682
  ASoC: mediatek: mt8195: add DPTX audio support
  ASoC: mediatek: mt8195: add HDMITX audio support
  dt-bindings: mediatek: mt8195: add mt8195-mt6359-rt1019-rt5682
    document

 .../bindings/sound/mt8195-afe-pcm.yaml        |  184 +
 .../sound/mt8195-mt6359-rt1019-rt5682.yaml    |   47 +
 sound/soc/mediatek/Kconfig                    |   24 +
 sound/soc/mediatek/Makefile                   |    1 +
 sound/soc/mediatek/common/mtk-afe-fe-dai.c    |   22 +-
 sound/soc/mediatek/common/mtk-base-afe.h      |   10 +-
 sound/soc/mediatek/mt8195/Makefile            |   15 +
 sound/soc/mediatek/mt8195/mt8195-afe-clk.c    |  441 +++
 sound/soc/mediatek/mt8195/mt8195-afe-clk.h    |  109 +
 sound/soc/mediatek/mt8195/mt8195-afe-common.h |  158 +
 sound/soc/mediatek/mt8195/mt8195-afe-pcm.c    | 3281 +++++++++++++++++
 sound/soc/mediatek/mt8195/mt8195-audsys-clk.c |  214 ++
 sound/soc/mediatek/mt8195/mt8195-audsys-clk.h |   15 +
 .../soc/mediatek/mt8195/mt8195-audsys-clkid.h |   93 +
 sound/soc/mediatek/mt8195/mt8195-dai-adda.c   |  830 +++++
 sound/soc/mediatek/mt8195/mt8195-dai-etdm.c   | 2639 +++++++++++++
 sound/soc/mediatek/mt8195/mt8195-dai-pcm.c    |  389 ++
 .../mt8195/mt8195-mt6359-rt1019-rt5682.c      | 1087 ++++++
 sound/soc/mediatek/mt8195/mt8195-reg.h        | 2796 ++++++++++++++
 19 files changed, 12350 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
 create mode 100644 Documentation/devicetree/bindings/sound/mt8195-mt6359-rt1019-rt5682.yaml
 create mode 100644 sound/soc/mediatek/mt8195/Makefile
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-afe-clk.c
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-afe-clk.h
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-afe-common.h
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-afe-pcm.c
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-audsys-clk.c
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-audsys-clk.h
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-audsys-clkid.h
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-dai-adda.c
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-dai-etdm.c
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-dai-pcm.c
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c
 create mode 100644 sound/soc/mediatek/mt8195/mt8195-reg.h

--
2.18.0

Clean up the following includecheck warning:

./sound/soc/sof/intel/pci-tng.c: shim.h is included more than once.

No functional change.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210824030015.57267-1-deng.changcheng@zte.com.cnSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds document for mt8195 board with mt6359, rt1019 and rt5682
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-12-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds HDMITX audio support on mt8195-mt6359-rt1019-rt5682 board.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-11-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds DPTX audio support on mt8195-mt6359-rt1019-rt5682 board.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-10-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds support for mt8195 board with mt6359, rt1019 and rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210819084144.18483-9-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds mt8195 audio afe document.

In order to support dynamic clock reparenting for ADDA and ETDM, PLL
and MUX clocks are requested even though they are not consumed by afe
directly.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-8-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds mt8195 platform and affiliated driver.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210819084144.18483-7-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds mt8195 pcm dai driver.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-6-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds mt8195 adda dai driver.

audio_h clock is used by ADSP bus and ADDA module.
When ADDA requires audio_h clock, it is switched to APLL1, otherwise
it is switched to Xtal_26m so that APLL1 can be turned off when audio
feature is not used.
ADSP bus only requires that the clock is on, so dynamic reparenting
is used for the purpose of lowering power consumption.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-5-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds mt8195 tdm/i2s dai driver.

MCLK clock tree is as follows.
PLL -> MUX -> DIVIDER -> MCLK

For PLL source of MCLK, driver only supports APLL1 and APLL2 now.
APLL3 and APLL4 are used to track external clock source, so they are
only used when slave input is connected.

For example,
case 1: (HDMI RX connected)
DL memif (a1sys) -> etdm out2 (clk from apll1/apll2) -> codec
case 2: (HDMI RX disconnected)
HDMI RX -> a3sys -> UL memif (a3sys) -> DL memif (a3sys) -> .... ->
etdm out2 (clk from apll3) -> codec

We keep all modules in the pipeline working on the same clock domain.
MCLK is expected to output the clock generated from the same clock
source as the pipeline, so dynamic reparenting is required for MCLK
configuration.

As a result, clk_set_parent() is used to select PLL source,
and clk_set_rate() is used to configure divider to get MCLK output rate.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-4-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch adds mt8195 audio cg control.
Audio clock gates are registered to CCF for reference count and
clock parent management.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-3-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

Update mediatek common driver to support MT8195
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210819084144.18483-2-trevor.wu@mediatek.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch reverts commit acbf58e5 ("ASoC: wm_adsp: Let
soc_cleanup_component_debugfs remove debugfs"), and adds an
alternate solution to the issue. That patch removes the call to
debugfs_remove_recursive, which cleans up the DSPs debugfs. The
intention was to avoid an unbinding issue on an out of tree
driver/platform.

The issue with the patch is it means the driver no longer cleans up
its own debugfs, instead relying on ASoC to remove recurive on the
parent debugfs node. This is conceptually rather unclean, but also it
would prevent DSPs being added/removed independently of ASoC and soon
we are going to be upstreaming some non-audio parts with these DSPs,
which will require this.

Finally, it seems the issue on the platform is a result of the
wm_adsp2_cleanup_debugfs getting called twice. This is very likely a
problem on the platform side and will be resolved there. But in the mean
time make the code a little more robust to such issues, and again
conceptually a bit nicer, but clearing the debugfs_root variable in the
DSP structure when the debugfs is removed.

Fixes: acbf58e5 ("ASoC: wm_adsp: Let soc_cleanup_component_debugfs remove debugfs"
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210824101552.1119-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series "ASoC: Intel: Skylake: Fix and support complex" from Cezary Rojewski <cezary.rojewski@intel.com>:

Existing skylake-driver supports very basic scenarios with limited range
of modules and their control. Attached changes first fix code as several
advanced configurations are 'mentioned' throughout the files but are not
actually functional. Follow up are changes adding missing support for
said configurations.

Cezary Rojewski (5):
  ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373
  ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs
  ASoC: Intel: Skylake: Fix module resource and format selection
  ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER
  ASoC: Intel: Skylake: Select first entry for singular pipe config
    arrays

Gustaw Lewandowski (2):
  ASoC: Intel: Skylake: Fix passing loadable flag for module
  ASoC: Intel: Skylake: Simplify m_state for loadable modules

Kareem Shaik (1):
  ASoC: Intel: Skylake: Support multiple format configs

Pawel Harlozinski (1):
  ASoC: Intel: Skylake: Properly configure modules with generic
    extension

Piotr Maziarz (1):
  ASoC: Intel: Skylake: Select proper format for NHLT blob

Szymon Mielczarek (1):
  ASoC: Intel: Skylake: Support modules with generic extension

 include/uapi/sound/snd_sst_tokens.h          |   6 +-
 sound/soc/intel/boards/kbl_da7219_max98927.c |  55 +------
 sound/soc/intel/skylake/skl-messages.c       | 155 ++++++++++++-------
 sound/soc/intel/skylake/skl-pcm.c            |  25 ++-
 sound/soc/intel/skylake/skl-topology.c       | 155 +++++++++++--------
 sound/soc/intel/skylake/skl-topology.h       |  26 +++-
 6 files changed, 231 insertions(+), 191 deletions(-)

--
2.25.1

bclk_ms is possible unused by using the given config (see [1]).

sound/soc/codecs/rt1015.c:724:2: warning: Value stored to 'bclk_ms' is
never read [clang-analyzer-deadcode.DeadStores]
           bclk_ms = frame_size > 32;
           ^         ~~~~~~~~~~~~~~~

In addition, bclk_ms is meaningless and confusing after applying commit
a5db2ca5 ("ASoC: rt1015: remove unneeded variables in rt1015_priv").
The "> 32" in the expression looks like a typo but it was not.

Let's remove the confusing variable bclk_ms.

[1]: https://lkml.org/lkml/2021/8/23/305Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210823153323.1297723-1-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>

The byt_rt5640_hp_elitepad_1000g2_jack?_check functions are only
used inside bytcr_rt5640.c, mark them as static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210823110432.64860-1-hdegoede@redhat.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use common enum instead of oneOf and correct indentation warning:
  realtek,rt1015p.yaml:18:7: [warning] wrong indentation: expected 4 but found 6 (indentation)
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Tzung-Bi Shih <tzungbi@google.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210819101020.26368-2-krzysztof.kozlowski@canonical.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add compatible for CUI Devices CMM-4030D-261-I2S-TR.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20210821082658.4147595-3-angelo.dureghello@timesys.comSigned-off-by: Mark Brown <broonie@kernel.org>

Add vendor prefix for CUI Devices.
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20210821082658.4147595-2-angelo.dureghello@timesys.comSigned-off-by: Mark Brown <broonie@kernel.org>

Despite minimal datasheet differences, the driver seems
perfectly compatible with CMM-4030D-261.

Tested CMM-4030D-261 to work with this changes:

/ {
        cmm4030d: cmm4030d {
                #sound-dai-cells = <0>;
                compatible = "cui,cmm-4030d-261";
        };

        sound_mic {
                compatible = "simple-audio-card";
                simple-audio-card,name = "i2s mem mic";
                simple-audio-card,format = "i2s";
                simple-audio-card,bitclock-master = <&sound_master>;
                simple-audio-card,frame-master = <&sound_master>;
                sound_master: simple-audio-card,cpu {
                        sound-dai = <&ssi2>;
                        system-clock-frequency = <2822400>;
                };
                simple-audio-card,codec {
                        sound-dai = <&cmm4030d>;
                };
        };
};

Audio has been captured and tested successfully by:

arecord -D "hw:1,0" -f S24_LE > test.wav
aplay test.wav
Signed-off-by: Angelo Dureghello <angelo.dureghello@timesys.com>
Link: https://lore.kernel.org/r/20210821082658.4147595-1-angelo.dureghello@timesys.comSigned-off-by: Mark Brown <broonie@kernel.org>

When pipe does not expose multiple configuration options, always select
the first entry without searching for matching one.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-12-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Make use of struct skl_base_cfg_ext and its format setter to configure
modules which are described with said structure.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com>
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-11-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some DSP modules require, besides the module base configuration, a
generic extension containing audio format for all module's pins that are
in use.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-10-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

A module can have two kinds of set params, as per topology requirements.
For example, one pre-init and one post-init. But currently, there is
support for just one type, as the format_config.

This patch extends the format_configs to 4, so as to be able to support
pre-init, post-init and post-bind type of set params, for the same
module, simultaneously.
Signed-off-by: Kareem Shaik <kareem.m.shaik@intel.com>
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-9-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

States SKL_MODULE_LOADED and SKL_MODULE_UNLOADED are redundant with
'loadable' flag in struct skl_module. Additionally
skl_tplg_mixer_dapm_post_pmd_event() sets m_state always to
SKL_MODULE_UNINIT so next unload function isn't called for such modules.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-8-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

skl_get_module_info() tries to set mconfig->module->loadable before
mconfig->module has been assigned thus flag was always set to false
and driver did not try to load module binaries.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-7-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

KeyPhrasebuffer, Mixin and Mixout modules configuration is described by
firmware's basic module configuration structure. There are no extended
parameters required. Update functions taking part in building
INIT_INSTANCE IPC payload to reflect that.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-6-cezary.rojewski@intel.comSigned-off-by: Mark Brown <broonie@kernel.org>