Describe the dynamic power coefficient of A57 and A53 CPUs.

Based on work by Gaku Inami <gaku.inami.xw@bp.renesas.com> and others.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Setup a thermal zone driven by SoC temperature sensor.
Create passive trip points and bind them to CPUFreq cooling
device that supports power extension.

In R-Car Gen3, IPA is supported for only one channel
(on H3/M3/M3N SoCs, it is channel THS3). Reason:
  Currently, IPA controls base on only CPU temperature.
  And only one thermal channel is assembled closest
  CPU cores is selected as target of IPA.
  If other channels are used, IPA controlling is not properly.

The A5 cooling device supports 5 cooling states which can be categorised as
follows:

0 & 1) boost (clocking up)
2)     default
3 & 4) cooling (clocking down)

Currently the thermal framework assumes that the default is the minimum,
or in other words there is no provision for handling boost states.
So this patch only describes the upper 3 states, default and cooling.

A single cooling device is described for all A57 CPUs and a separate
cooling device is described for all A53 CPUs. This reflects that physically
there is only one cooling device present for each type of CPU.

This patch improves on an earlier version by:

* Omitting cooling-max-level and cooling-min-level properties which
  are no longer present in mainline as of v4.17
* Removing an unused trip-point0 node sub-property from the trips
  property.
* Using cooling-device indexes such that maximum refers to maximum cooling
  rather than the inverse.
* Defers adding dynamic-power-coefficient properties to a separate patch as
  these are properties of the CPU.

The long signed-off by chain below reflects many revisions, mainly
internal, that this patch has been through.
Signed-off-by: Dien Pham <dien.pham.ry@renesas.com>
Signed-off-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: Hien Dang <hien.dang.eb@rvc.renesas.com>
Signed-off-by: An Huynh <an.huynh.uj@rvc.renesas.com>
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Since the commit 233da2c9 ("dt-bindings: phy: rcar-gen3-phy-usb2:
Revise #phy-cells property") revised the #phy-cells, this patch follows
the updated document for R-Car Gen3 and RZ/A2 SoCs.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

It is incorrect to specify the no-ether-link property for the AVB device on
the Ebisu board. This is because the property should only be used when a
board does not provide a proper AVB_LINK signal. However, the Ebisu board
does provide this signal.

As per 87c059e9 ("arm64: dts: renesas: salvator-x: Remove renesas,
no-ether-link property") this fixes a bug:

    Steps to reproduce:
    - start AVB TX stream (Using aplay via MSE),
    - disconnect+reconnect the eth cable,
    - after a reconnection the eth connection goes iteratively up/down
      without user interaction,
    - this may heal after some seconds or even stay for minutes.

    As the documentation specifies, the "renesas,no-ether-link" option
    should be used when a board does not provide a proper AVB_LINK signal.
    There is no need for this option enabled on RCAR H3/M3 Salvator-X/XS
    and ULCB starter kits since the AVB_LINK is correctly handled by HW.

    Choosing to keep or remove the "renesas,no-ether-link" option will have
    impact on the code flow in the following ways:
    - keeping this option enabled may lead to unexpected behavior since the
      RX & TX are enabled/disabled directly from adjust_link function
      without any HW interrogation,
    - removing this option, the RX & TX will only be enabled/disabled after
      HW interrogation. The HW check is made through the LMON pin in PSR
      register which specifies AVB_LINK signal value (0 - at low level;
      1 - at high level).

    In conclusion, the present change is also a safety improvement because
    it removes the "renesas,no-ether-link" option leading to a proper way
    of detecting the link state based on HW interrogation and not on
    software heuristic.

Fixes: 8441ef64 ("arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB")
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[simon: updated changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Apparently this DTS crossed over with commit 31af04cd ("arm64: dts:
Remove inconsistent use of 'arm,armv8' compatible string") and missed
out on the cleanup, so put it right.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Convert bootargs from ip=dhcp to ip=on
Signed-off-by: Magnus Damm <damm+renesas@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch enables BT support for the CAT874 board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch enables WLAN support for the CAT874 board.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add tpu device node to dtsi for TPU support on r8a7795 SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add tpu device node to dtsi for TPU support on r8a77965 SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add tpu device node to dtsi for TPU support on r8a7796 SoC.
Signed-off-by: Cao Van Dong <cv-dong@jinso.co.jp>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This patch adds description of TI WL1837 and links interfaces
to communicate with the IC, namely the SDIO interface to WLAN.
Signed-off-by: Spyridon Papageorgiou <spapageorgiou@de.adit-jv.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The ports node of vin4 only has one sub-node and thus does
not need #address-cells/#size-cells and the sub-node does
not need an exit.

This addresses the following warning:

 # make dtbs W=1
 ...
 arch/arm64/boot/dts/renesas/r8a77995-draak.dts:492.8-503.4: Warning (graph_child_address): /soc/video@e6ef4000/ports: graph node has single child node 'port@0', #address-cells/#size-cells are not necessary

Fixes: 6a0942c2 ("arm64: dts: renesas: draak: Describe CVBS input")
Cc: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

The CAT874 board pushes sound via I2S over SSI0 into the
TDA19988BET chip.
This commit wires things up so that we can get sound out of
the HDMI interface.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The CAT874 board comes with a HDMI connector, managed by
a TDA19988BET chip, connected to the RZ/G2E SoC via DPAD.
This patch adds the necessary support to the board DT.
Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add IPMMU-DS0 to the Ethernet-AVB device node.

Based on work by Magnus Damm for the r8a7795.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Hook up r8a774a1 Audio-DMAC nodes to the IPMMU-MP.

Based on work for the r8a7795 by Magnus Damm.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Hook up r8a774a1 DMAC nodes to the IPMMUs. In particular SYS-DMAC0
gets tied to IPMMU-DS0, and SYS-DMAC1 and SYS-DMAC2 get tied to IPMMU-DS1.

Based on work for the r8a7796 by Magnus Damm.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The r8a774a1 has a single FDP1 instance similar to r8a7796.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Add the DU device to r8a774a1.dtsi in a disabled state.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The r8a774a1 soc has 5 VSP instances similar to r8a7796.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Pull UBIFS fixes from Richard Weinberger:

 - build errors wrt xattrs

 - mismerge which lead to a wrong Kconfig ifdef

 - missing endianness conversion

* tag 'upstream-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
  ubifs: Convert xattr inum to host order
  ubifs: Use correct config name for encryption
  ubifs: Fix build error without CONFIG_UBIFS_FS_XATTR

Merge yet more updates from Andrew Morton:
 "A few final bits:

   - large changes to vmalloc, yielding large performance benefits

   - tweak the console-flush-on-panic code

   - a few fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  panic: add an option to replay all the printk message in buffer
  initramfs: don't free a non-existent initrd
  fs/writeback.c: use rcu_barrier() to wait for inflight wb switches going into workqueue when umount
  mm/compaction.c: correct zone boundary handling when isolating pages from a pageblock
  mm/vmap: add DEBUG_AUGMENT_LOWEST_MATCH_CHECK macro
  mm/vmap: add DEBUG_AUGMENT_PROPAGATE_CHECK macro
  mm/vmalloc.c: keep track of free blocks for vmap allocation

Pull more Kbuild updates from Masahiro Yamada:

 - remove unneeded use of cc-option, cc-disable-warning, cc-ldoption

 - exclude tracked files from .gitignore

 - re-enable -Wint-in-bool-context warning

 - refactor samples/Makefile

 - stop building immediately if syncconfig fails

 - do not sprinkle error messages when $(CC) does not exist

 - move arch/alpha/defconfig to the configs subdirectory

 - remove crappy header search path manipulation

 - add comment lines to .config to clarify the end of menu blocks

 - check uniqueness of module names (adding new warnings intentionally)

* tag 'kbuild-v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (24 commits)
  kconfig: use 'else ifneq' for Makefile to improve readability
  kbuild: check uniqueness of module names
  kconfig: Terminate menu blocks with a comment in the generated config
  kbuild: add LICENSES to KBUILD_ALLDIRS
  kbuild: remove 'addtree' and 'flags' magic for header search paths
  treewide: prefix header search paths with $(srctree)/
  media: prefix header search paths with $(srctree)/
  media: remove unneeded header search paths
  alpha: move arch/alpha/defconfig to arch/alpha/configs/defconfig
  kbuild: terminate Kconfig when $(CC) or $(LD) is missing
  kbuild: turn auto.conf.cmd into a mandatory include file
  .gitignore: exclude .get_maintainer.ignore and .gitattributes
  kbuild: add all Clang-specific flags unconditionally
  kbuild: Don't try to add '-fcatch-undefined-behavior' flag
  kbuild: add some extra warning flags unconditionally
  kbuild: add -Wvla flag unconditionally
  arch: remove dangling asm-generic wrappers
  samples: guard sub-directories with CONFIG options
  kbuild: re-enable int-in-bool-context warning
  MAINTAINERS: kbuild: Add pattern for scripts/*vmlinux*
  ...

Pull i2c updates from Wolfram Sang:
 "Some I2C core API additions which are kind of simple but enhance error
  checking for users a lot, especially by returning errno now.

  There are wrappers to still support the old API but it will be removed
  once all users are converted"

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: core: add device-managed version of i2c_new_dummy
  i2c: core: improve return value handling of i2c_new_device and i2c_new_dummy

Pull ext4 fixes from Ted Ts'o:
 "Some bug fixes, and an update to the URL's for the final version of
  Unicode 12.1.0"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: avoid panic during forced reboot due to aborted journal
  ext4: fix block validity checks for journal inodes using indirect blocks
  unicode: update to Unicode 12.1.0 final
  unicode: add missing check for an error return from utf8lookup()
  ext4: fix miscellaneous sparse warnings
  ext4: unsigned int compared against zero
  ext4: fix use-after-free in dx_release()
  ext4: fix data corruption caused by overlapping unaligned and aligned IO
  jbd2: fix potential double free
  ext4: zero out the unused memory region in the extent tree block

Pull cifs fixes from Steve French:
 "Minor cleanup and fixes, one for stable, four rdma (smbdirect)
  related. Also adds SEEK_HOLE support"

* tag '5.2-rc-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: add support for SEEK_DATA and SEEK_HOLE
  Fixed https://bugzilla.kernel.org/show_bug.cgi?id=202935 allow write on the same file
  cifs: Allocate memory for all iovs in smb2_ioctl
  cifs: Don't match port on SMBDirect transport
  cifs:smbd Use the correct DMA direction when sending data
  cifs:smbd When reconnecting to server, call smbd_destroy() after all MIDs have been called
  cifs: use the right include for signal_pending()
  smb3: trivial cleanup to smb2ops.c
  cifs: cleanup smb2ops.c and normalize strings
  smb3: display session id in debug data

Pull perf tooling updates from Ingo Molnar:
 "perf.data:

   - Streaming compression of perf ring buffer into
     PERF_RECORD_COMPRESSED user space records, resulting in ~3-5x
     perf.data file size reduction on variety of tested workloads what
     saves storage space on larger server systems where perf.data size
     can easily reach several tens or even hundreds of GiBs, especially
     when profiling with DWARF-based stacks and tracing of context
     switches.

  perf record:

   - Improve -user-regs/intr-regs suggestions to overcome errors

  perf annotate:

   - Remove hist__account_cycles() from callback, speeding up branch
     processing (perf record -b)

  perf stat:

   - Add a 'percore' event qualifier, e.g.: -e
     cpu/event=0,umask=0x3,percore=1/, that sums up the event counts for
     both hardware threads in a core.

     We can already do this with --per-core, but it's often useful to do
     this together with other metrics that are collected per hardware
     thread.

     I.e. now its possible to do this per-event, and have it mixed with
     other events not aggregated by core.

  arm64:

   - Map Brahma-B53 CPUID to cortex-a53 events.

   - Add Cortex-A57 and Cortex-A72 events.

  csky:

   - Add DWARF register mappings for libdw, allowing --call-graph=dwarf
     to work on the C-SKY arch.

  x86:

   - Add support for recording and printing XMM registers, available,
     for instance, on Icelake.

   - Add uncore_upi (Intel's "Ultra Path Interconnect" events) JSON
     support. UPI replaced the Intel QuickPath Interconnect (QPI) in
     Xeon Skylake-SP.

  Intel PT:

   - Fix instructions sampling rate.

   - Timestamp fixes.

   - Improve exported-sql-viewer GUI, allowing, for instance, to
     copy'n'paste the trees, useful for e-mailing"

* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (73 commits)
  perf stat: Support 'percore' event qualifier
  perf stat: Factor out aggregate counts printing
  perf tools: Add a 'percore' event qualifier
  perf docs: Add description for stderr
  perf intel-pt: Fix sample timestamp wrt non-taken branches
  perf intel-pt: Fix improved sample timestamp
  perf intel-pt: Fix instructions sampling rate
  perf regs x86: Add X86 specific arch__intr_reg_mask()
  perf parse-regs: Add generic support for arch__intr/user_reg_mask()
  perf parse-regs: Split parse_regs
  perf vendor events arm64: Add Cortex-A57 and Cortex-A72 events
  perf vendor events arm64: Map Brahma-B53 CPUID to cortex-a53 events
  perf vendor events arm64: Remove [[:xdigit:]] wildcard
  perf jevents: Remove unused variable
  perf test zstd: Fixup verbose mode output
  perf tests: Implement Zstd comp/decomp integration test
  perf inject: Enable COMPRESSED record decompression
  perf report: Implement perf.data record decompression
  perf record: Implement -z,--compression_level[=<n>] option
  perf report: Add stub processing of compressed events for -D
  ...

Pull clocksource updates from Ingo Molnar:
 "Misc clocksource/clockevent driver updates that came in a bit late but
  are ready for v5.2"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  misc: atmel_tclib: Do not probe already used TCBs
  clocksource/drivers/timer-atmel-tcb: Convert tc_clksrc_suspend|resume() to static
  clocksource/drivers/tcb_clksrc: Rename the file for consistency
  clocksource/drivers/timer-atmel-pit: Rework Kconfig option
  clocksource/drivers/tcb_clksrc: Move Kconfig option
  ARM: at91: Implement clocksource selection
  clocksource/drivers/tcb_clksrc: Use tcb as sched_clock
  clocksource/drivers/tcb_clksrc: Stop depending on atmel_tclib
  ARM: at91: move SoC specific definitions to SoC folder
  clocksource/drivers/timer-milbeaut: Cleanup common register accesses
  clocksource/drivers/timer-milbeaut: Add shutdown function
  clocksource/drivers/timer-milbeaut: Fix to enable one-shot timer
  clocksource/drivers/tegra: Rework for compensation of suspend time
  clocksource/drivers/sp804: Add COMPILE_TEST to CONFIG_ARM_TIMER_SP804
  clocksource/drivers/sun4i: Add a compatible for suniv
  dt-bindings: timer: Add Allwinner suniv timer

Pull IRQ chip updates from Ingo Molnar:
 "A late irqchips update:

   - New TI INTR/INTA set of drivers

   - Rewrite of the stm32mp1-exti driver as a platform driver

   - Update the IOMMU MSI mapping API to be RT friendly

   - A number of cleanups and other low impact fixes"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (34 commits)
  iommu/dma-iommu: Remove iommu_dma_map_msi_msg()
  irqchip/gic-v3-mbi: Don't map the MSI page in mbi_compose_m{b, s}i_msg()
  irqchip/ls-scfg-msi: Don't map the MSI page in ls_scfg_msi_compose_msg()
  irqchip/gic-v3-its: Don't map the MSI page in its_irq_compose_msi_msg()
  irqchip/gicv2m: Don't map the MSI page in gicv2m_compose_msi_msg()
  iommu/dma-iommu: Split iommu_dma_map_msi_msg() in two parts
  genirq/msi: Add a new field in msi_desc to store an IOMMU cookie
  arm64: arch_k3: Enable interrupt controller drivers
  irqchip/ti-sci-inta: Add msi domain support
  soc: ti: Add MSI domain bus support for Interrupt Aggregator
  irqchip/ti-sci-inta: Add support for Interrupt Aggregator driver
  dt-bindings: irqchip: Introduce TISCI Interrupt Aggregator bindings
  irqchip/ti-sci-intr: Add support for Interrupt Router driver
  dt-bindings: irqchip: Introduce TISCI Interrupt router bindings
  gpio: thunderx: Use the default parent apis for {request,release}_resources
  genirq: Introduce irq_chip_{request,release}_resource_parent() apis
  firmware: ti_sci: Add helper apis to manage resources
  firmware: ti_sci: Add RM mapping table for am654
  firmware: ti_sci: Add support for IRQ management
  firmware: ti_sci: Add support for RM core ops
  ...

Pull EFI fix from Ingo Molnar:
 "Fix an EFI-fb regression that affects certain x86 systems"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  fbdev/efifb: Ignore framebuffer memmap entries that lack any memory types

Pull core fixes from Ingo Molnar:
 "This fixes a particularly thorny munmap() bug with MPX, plus fixes a
  host build environment assumption in objtool"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Allow AR to be overridden with HOSTAR
  x86/mpx, mm/core: Fix recursive munmap() corruption

Pull ARM SoC late updates from Olof Johansson:
 "This is some material that we picked up into our tree late. Most of it
  are smaller fixes and additions, some defconfig updates due to recent
  development, etc.

  Code-wise the largest portion is a series of PM updates for the at91
  platform, and those have been in linux-next a while through the at91
  tree before we picked them up"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (29 commits)
  arm64: dts: sprd: Add clock properties for serial devices
  Opt out of scripts/get_maintainer.pl
  ARM: ixp4xx: Remove duplicated include from common.c
  soc: ixp4xx: qmgr: Fix an NULL vs IS_ERR() check in probe
  arm64: tegra: Disable XUSB support on Jetson TX2
  arm64: tegra: Enable SMMU translation for PCI on Tegra186
  arm64: tegra: Fix insecure SMMU users for Tegra186
  arm64: tegra: Select ARM_GIC_PM
  amba: tegra-ahb: Mark PM functions as __maybe_unused
  ARM: dts: logicpd-som-lv: Fix MMC1 card detect
  ARM: mvebu: drop return from void function
  ARM: mvebu: prefix coprocessor operand with p
  ARM: mvebu: drop unnecessary label
  ARM: mvebu: fix a leaked reference by adding missing of_node_put
  ARM: socfpga_defconfig: enable LTC2497
  ARM: mvebu: kirkwood: remove error message when retrieving mac address
  ARM: at91: sama5: make ov2640 as a module
  ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
  ARM: at91: remove HAVE_FB_ATMEL for sama5 SoC as they use DRM
  soc/fsl/qe: Fix an error code in qe_pin_request()
  ...

Pull powerpc fixes from Michael Ellerman:
 "One fix going back to stable, for a bug on 32-bit introduced when we
  added support for THREAD_INFO_IN_TASK.

  A fix for a typo in a recent rework of our hugetlb code that leads to
  crashes on 64-bit when using hugetlbfs with a 4K PAGE_SIZE.

  Two fixes for our recent rework of the address layout on 64-bit hash
  CPUs, both only triggered when userspace tries to access addresses
  outside the user or kernel address ranges.

  Finally a fix for a recently introduced double free in an error path
  in our cacheinfo code.

  Thanks to: Aneesh Kumar K.V, Christophe Leroy, Sachin Sant, Tobin C.
  Harding"

* tag 'powerpc-5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/cacheinfo: Remove double free
  powerpc/mm/hash: Fix get_region_id() for invalid addresses
  powerpc/mm: Drop VM_BUG_ON in get_region_id()
  powerpc/mm: Fix crashes with hugepages & 4K pages
  powerpc/32s: fix flush_hash_pages() on SMP

Pull a few more MIPS updates from Paul Burton:
 "Some SGI IP27 specific PCI rework and a batch of fixes:

   - A build fix for BMIPS5000 configurations with
     CONFIG_HW_PERF_EVENTS=y, which also neatly removes some #ifdefery.

   - A fix to report supported ISAs correctly on older Ingenic SoCs
     which incorrectly indicate MIPSr2 support in their cop0 Config
     register.

   - Some PCI modernization for SGI IP27 systems as part of ongoing work
     to support some other SGI systems.

   - A fix allowing use of appended DTB files with generic kernels.

   - DMA mask fixes for SGI IP22 & Alchemy systems"

* tag 'mips_5.2_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Alchemy: add DMA masks for on-chip ethernet
  MIPS: SGI-IP22: provide missing dma_mask/coherent_dma_mask
  generic: fix appended dtb support
  MIPS: SGI-IP27: abstract chipset irq from bridge
  MIPS: SGI-IP27: use generic PCI driver
  MIPS: Fix Ingenic SoCs sometimes reporting wrong ISA
  MIPS: perf: Fix build with CONFIG_CPU_BMIPS5000 enabled

Merge tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
 "This contains an assortment of RISC-V related patches that I'd like to
  target for the 5.2 merge window. Most of the patches are cleanups, but
  there are a handful of user-visible changes:

   - The nosmp and nr_cpus command-line arguments are now supported,
     which work like normal.

   - The SBI console no longer installs itself as a preferred console,
     we rely on standard mechanisms (/chosen, command-line, hueristics)
     instead.

   - sfence_remove_sfence_vma{,_asid} now pass their arguments along to
     the SBI call.

   - Modules now support BUG().

   - A missing sfence.vma during boot has been added. This bug only
     manifests during boot.

   - The arch/riscv support for SiFive's L2 cache controller has been
     merged, which should un-block the EDAC framework work.

  I've only tested this on QEMU again, as I didn't have time to get
  things running on the Unleashed. The latest master from this morning
  merges in cleanly and passes the tests as well"

* tag 'riscv-for-linus-5.2-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (31 commits)
  riscv: fix locking violation in page fault handler
  RISC-V: sifive_l2_cache: Add L2 cache controller driver for SiFive SoCs
  RISC-V: Add DT documentation for SiFive L2 Cache Controller
  RISC-V: Avoid using invalid intermediate translations
  riscv: Support BUG() in kernel module
  riscv: Add the support for c.ebreak check in is_valid_bugaddr()
  riscv: support trap-based WARN()
  riscv: fix sbi_remote_sfence_vma{,_asid}.
  riscv: move switch_mm to its own file
  riscv: move flush_icache_{all,mm} to cacheflush.c
  tty: Don't force RISCV SBI console as preferred console
  RISC-V: Access CSRs using CSR numbers
  RISC-V: Add interrupt related SCAUSE defines in asm/csr.h
  RISC-V: Use tabs to align macro values in asm/csr.h
  RISC-V: Fix minor checkpatch issues.
  RISC-V: Support nr_cpus command line option.
  RISC-V: Implement nosmp commandline option.
  RISC-V: Add RISC-V specific arch_match_cpu_phys_id
  riscv: vdso: drop unnecessary cc-ldoption
  riscv: call pm_power_off from machine_halt / machine_power_off
  ...

'ifeq ... else ifneq ... endif' notation is supported by GNU Make 3.81
or later, which is the requirement for building the kernel since
commit 37d69ee3 ("docs: bump minimal GNU Make version to 3.81").

Use it to improve the readability.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Currently on panic, kernel will lower the loglevel and print out pending
printk msg only with console_flush_on_panic().

Add an option for users to configure the "panic_print" to replay all
dmesg in buffer, some of which they may have never seen due to the
loglevel setting, which will help panic debugging .

[feng.tang@intel.com: keep the original console_flush_on_panic() inside panic()]
  Link: http://lkml.kernel.org/r/1556199137-14163-1-git-send-email-feng.tang@intel.com
[feng.tang@intel.com: use logbuf lock to protect the console log index]
  Link: http://lkml.kernel.org/r/1556269868-22654-1-git-send-email-feng.tang@intel.com
Link: http://lkml.kernel.org/r/1556095872-36838-1-git-send-email-feng.tang@intel.comSigned-off-by: Feng Tang <feng.tang@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Aaro Koskinen <aaro.koskinen@nokia.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Since commit 54c7a891 ("initramfs: free initrd memory if opening
/initrd.image fails"), the kernel has unconditionally attempted to free
the initrd even if it doesn't exist.

In the non-existent case this causes a boot-time splat if
CONFIG_DEBUG_VIRTUAL is enabled due to a call to virt_to_phys() with a
NULL address.

Instead we should check that the initrd actually exists and only attempt
to free it if it does.

Link: http://lkml.kernel.org/r/20190516143125.48948-1-steven.price@arm.com
Fixes: 54c7a891 ("initramfs: free initrd memory if opening /initrd.image fails")
Signed-off-by: Steven Price <steven.price@arm.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Tested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>