The first time I read the function ocfs2_resmap_resv_bits, I consider
about what 'wanted' will be used and consider about the comments.
Then I find it is only used if the reservation is empty. ;)

So we'd better move it to the parens so that it make the code more
readable, what's more, ocfs2_resmap_resv_bits is used so frequently
and we should save some cpus.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

e_leaf_clusters is a le16, so use cpu_to_le16 instead
of cpu_to_le32.

What's more, we change 'clusters' to unsigned int to
signify that the size of 'clusters' isn't important here.
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

In commit 30e2bab2, ext3 fixed it. So change it accordingly in ocfs2.

Steps to reproduce:
# touch aaa
# stat -c %Z aaa
1283760364
# setfacl -m  'u::x,g::x,o::x' aaa
# stat -c %Z aaa
1283760364
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

mmotm/fs/ocfs2/cluster/tcp.c: In function ‘o2net_send_message_vec’:
mmotm/fs/ocfs2/cluster/tcp.c:980:6: warning: ‘ret’ may be used uninitialized in this function

It seems a real bug introduced by commit 9af0b38f (ocfs2/net:
Use wait_event() in o2net_send_message_vec()).

cc: Sunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

This patch tries to handle the case in which list 'dlm->tracking_list' is
empty, to avoid accessing an invalid pointer. It fixes the following oops:

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1287Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

In ocfs2_dx_dir_rebalance(), we need to rejournal_acess the blocks after
calling ocfs2_insert_extent() since growing an extent tree may trigger
ocfs2_extend_trans(), which makes previous journal_access meaningless.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

This patch change mutex_lock to a new subclass and
add a new inode lock subclass for the target inode
which caused this lockdep warning.

=============================================
[ INFO: possible recursive locking detected ]
2.6.35+ #5
---------------------------------------------
reflink/11086 is trying to acquire lock:
 (Meta){+++++.}, at: [<ffffffffa06f9d65>] ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]

but task is already holding lock:
 (Meta){+++++.}, at: [<ffffffffa06f9aa0>] ocfs2_reflink_ioctl+0x5d3/0x1229 [ocfs2]

other info that might help us debug this:
6 locks held by reflink/11086:
 #0:  (&sb->s_type->i_mutex_key#15/1){+.+.+.}, at: [<ffffffff820e09ec>] lookup_create+0x26/0x97
 #1:  (&sb->s_type->i_mutex_key#15){+.+.+.}, at: [<ffffffffa06f99a0>] ocfs2_reflink_ioctl+0x4d3/0x1229 [ocfs2]
 #2:  (Meta){+++++.}, at: [<ffffffffa06f9aa0>] ocfs2_reflink_ioctl+0x5d3/0x1229 [ocfs2]
 #3:  (&oi->ip_xattr_sem){+.+.+.}, at: [<ffffffffa06f9b58>] ocfs2_reflink_ioctl+0x68b/0x1229 [ocfs2]
 #4:  (&oi->ip_alloc_sem){+.+.+.}, at: [<ffffffffa06f9b67>] ocfs2_reflink_ioctl+0x69a/0x1229 [ocfs2]
 #5:  (&sb->s_type->i_mutex_key#15/2){+.+...}, at: [<ffffffffa06f9d4f>] ocfs2_reflink_ioctl+0x882/0x1229 [ocfs2]

stack backtrace:
Pid: 11086, comm: reflink Not tainted 2.6.35+ #5
Call Trace:
 [<ffffffff82063dd9>] validate_chain+0x56e/0xd68
 [<ffffffff82062275>] ? mark_held_locks+0x49/0x69
 [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
 [<ffffffff82065a81>] lock_acquire+0xc6/0xed
 [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
 [<ffffffffa06c9ade>] __ocfs2_cluster_lock+0x975/0xa0d [ocfs2]
 [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
 [<ffffffffa06e107b>] ? ocfs2_wait_for_recovery+0x15/0x8a [ocfs2]
 [<ffffffffa06cb6ea>] ocfs2_inode_lock_full_nested+0x1ac/0xdc5 [ocfs2]
 [<ffffffffa06f9d65>] ? ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
 [<ffffffff820623a0>] ? trace_hardirqs_on_caller+0x10b/0x12f
 [<ffffffff82060193>] ? debug_mutex_free_waiter+0x4f/0x53
 [<ffffffffa06f9d65>] ocfs2_reflink_ioctl+0x898/0x1229 [ocfs2]
 [<ffffffffa06ce24a>] ? ocfs2_file_lock_res_init+0x66/0x78 [ocfs2]
 [<ffffffff820bb2d2>] ? might_fault+0x40/0x8d
 [<ffffffffa06df9f6>] ocfs2_ioctl+0x61a/0x656 [ocfs2]
 [<ffffffff820ee5d3>] ? mntput_no_expire+0x1d/0xb0
 [<ffffffff820e07b3>] ? path_put+0x2c/0x31
 [<ffffffff820e53ac>] vfs_ioctl+0x2a/0x9d
 [<ffffffff820e5903>] do_vfs_ioctl+0x45d/0x4ae
 [<ffffffff8233a7f6>] ? _raw_spin_unlock+0x26/0x2a
 [<ffffffff8200299c>] ? sysret_check+0x27/0x62
 [<ffffffff820e59ab>] sys_ioctl+0x57/0x7a
 [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

As the name shows, we shouldn't have any lock in
ocfs2_xattr_get_nolock. so lift ip_xattr_sem to the caller.
This should be safe for us since the only 2 callers are:
1. ocfs2_xattr_get which will lock the resources.
2. ocfs2_mknod which don't need this locking.

And this also resolves the following lockdep warning.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.35+ #5
-------------------------------------------------------
reflink/30027 is trying to acquire lock:
 (&oi->ip_alloc_sem){+.+.+.}, at: [<ffffffffa0673b67>] ocfs2_reflink_ioctl+0x69a/0x1226 [ocfs2]

but task is already holding lock:
 (&oi->ip_xattr_sem){++++..}, at: [<ffffffffa0673b58>] ocfs2_reflink_ioctl+0x68b/0x1226 [ocfs2]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #3 (&oi->ip_xattr_sem){++++..}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffff82339650>] down_read+0x34/0x47
       [<ffffffffa0691cb8>] ocfs2_xattr_get_nolock+0xa0/0x4e6 [ocfs2]
       [<ffffffffa069d64f>] ocfs2_get_acl_nolock+0x5c/0x132 [ocfs2]
       [<ffffffffa069d9c7>] ocfs2_init_acl+0x60/0x243 [ocfs2]
       [<ffffffffa066499d>] ocfs2_mknod+0xae8/0xfea [ocfs2]
       [<ffffffffa0665041>] ocfs2_create+0x9d/0x105 [ocfs2]
       [<ffffffff820e1c83>] vfs_create+0x9b/0xf4
       [<ffffffff820e20bb>] do_last+0x2fd/0x5be
       [<ffffffff820e31c0>] do_filp_open+0x1fb/0x572
       [<ffffffff820d6cf6>] do_sys_open+0x5a/0xe7
       [<ffffffff820d6dac>] sys_open+0x1b/0x1d
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #2 (jbd2_handle){+.+...}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffffa0604ff8>] start_this_handle+0x4a3/0x4bc [jbd2]
       [<ffffffffa06051d6>] jbd2__journal_start+0xba/0xee [jbd2]
       [<ffffffffa0605218>] jbd2_journal_start+0xe/0x10 [jbd2]
       [<ffffffffa065ca34>] ocfs2_start_trans+0xb7/0x19b [ocfs2]
       [<ffffffffa06645f3>] ocfs2_mknod+0x73e/0xfea [ocfs2]
       [<ffffffffa0665041>] ocfs2_create+0x9d/0x105 [ocfs2]
       [<ffffffff820e1c83>] vfs_create+0x9b/0xf4
       [<ffffffff820e20bb>] do_last+0x2fd/0x5be
       [<ffffffff820e31c0>] do_filp_open+0x1fb/0x572
       [<ffffffff820d6cf6>] do_sys_open+0x5a/0xe7
       [<ffffffff820d6dac>] sys_open+0x1b/0x1d
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #1 (&journal->j_trans_barrier){.+.+..}:
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82064fa9>] lock_release_non_nested+0x1e5/0x24b
       [<ffffffff82065999>] lock_release+0x158/0x17a
       [<ffffffff823389f6>] __mutex_unlock_slowpath+0xbf/0x11b
       [<ffffffff82338a5b>] mutex_unlock+0x9/0xb
       [<ffffffffa0679673>] ocfs2_free_ac_resource+0x31/0x67 [ocfs2]
       [<ffffffffa067c6bc>] ocfs2_free_alloc_context+0x11/0x1d [ocfs2]
       [<ffffffffa0633de0>] ocfs2_write_begin_nolock+0x141e/0x159b [ocfs2]
       [<ffffffffa0635523>] ocfs2_write_begin+0x11e/0x1e7 [ocfs2]
       [<ffffffff820a1297>] generic_file_buffered_write+0x10c/0x210
       [<ffffffffa0653624>] ocfs2_file_aio_write+0x4cc/0x6d3 [ocfs2]
       [<ffffffff820d822d>] do_sync_write+0xc2/0x106
       [<ffffffff820d897b>] vfs_write+0xae/0x131
       [<ffffffff820d8e55>] sys_write+0x47/0x6f
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b

-> #0 (&oi->ip_alloc_sem){+.+.+.}:
       [<ffffffff82063f92>] validate_chain+0x727/0xd68
       [<ffffffff82064d6d>] __lock_acquire+0x79a/0x7f1
       [<ffffffff82065a81>] lock_acquire+0xc6/0xed
       [<ffffffff82339694>] down_write+0x31/0x52
       [<ffffffffa0673b67>] ocfs2_reflink_ioctl+0x69a/0x1226 [ocfs2]
       [<ffffffffa06599f6>] ocfs2_ioctl+0x61a/0x656 [ocfs2]
       [<ffffffff820e53ac>] vfs_ioctl+0x2a/0x9d
       [<ffffffff820e5903>] do_vfs_ioctl+0x45d/0x4ae
       [<ffffffff820e59ab>] sys_ioctl+0x57/0x7a
       [<ffffffff8200296b>] system_call_fastpath+0x16/0x1b
Signed-off-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Joel Becker <joel.becker@oracle.com>

* master.kernel.org:/home/rmk/linux-2.6-arm: (30 commits)
  ARM: Update mach-types
  ARM: Partially revert "Auto calculate ZRELADDR and provide option for exceptions"
  ARM: Ensure PTE modifications via dma_alloc_coherent are visible
  ARM: 6359/1: ep93xx: move clock initialization earlier
  Revert "[ARM] pxa: remove now unnecessary dma_needs_bounce()"
  ARM: 6352/1: perf: fix event validation
  ARM: 6344/1: Mark CPU_32v6K as depended on CPU_V7
  ARM: 6343/1: wire up fanotify and prlimit64 syscalls on ARM
  ARM: 6330/1: perf: reword comments relating to perf_event_do_pending
  ARM: pxa168fb: fix section mismatch
  ARM: pxa: Make id const in pwm_probe()
  ARM: pxa: fix CI_HSYNC and CI_VSYNC MFP defines for pxa300
  ARM: pxa: remove __init from cpufreq_driver->init()
  ARM: imx: set cache line size to 64 bytes for i.MX5
  mx5/clock: fix clear bit fields issue in _clk_ccgr_disable function
  mxc/tzic: add base address when accessing TZIC registers
  ARM: mach-shmobile: ap4evb: fix write protect for SDHI1
  ARM: mach-shmobile: ap4evb: modify FSI2 ID
  ARM: mach-shmobile: do not enable the PLLC2 clock on init
  ARM: mach-shmobile: Clock framework comment fix
  ...

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Partially revert e69edc7, which introduced automatic zreladdr
support.  The change in the way the manual definition is defined
seems to be error and conflict prone.  Go back to the original way
we were handling this for the time being, while keeping the automatic
zreladdr facility.

Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

lg_lock_global() currently only acquires spinlocks for online CPUs, but
it's meant to lock all possible CPUs.  Lglock-protected resources may be
associated with removed CPUs - and, indeed, that could happen with the
per-superblock open files lists.

At Nick's suggestion, change for_each_online_cpu() to
for_each_possible_cpu() to protect accesses to those resources.

Cc: Al Viro <viro@ZenIV.linux.org.uk>
Acked-by: Nick Piggin <npiggin@kernel.dk>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

So it can be used by all that need to check for that.
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband:
  RDMA/nes: Fix hang with modified FIN handling on A0 cards
  RDMA/nes: Change state to closing after FIN
  RDMA/nes: Fix double CLOSE event indication crash
  RDMA/nes: Write correct register write to set TX pause param
  RDMA/cxgb3: Don't exceed the max HW CQ depth

* 'fixes' of git://oss.oracle.com/git/tma/linux-2.6:
  ocfs2: Fix orphan add in ocfs2_create_inode_in_orphan
  ocfs2: split out ocfs2_prepare_orphan_dir() into locking and prep functions
  ocfs2: allow return of new inode block location before allocation of the inode
  ocfs2: use ocfs2_alloc_dinode_update_counts() instead of open coding
  ocfs2: split out inode alloc code from ocfs2_mknod_locked
  Ocfs2: Fix a regression bug from mainline commit(6b933c8e).
  ocfs2: Fix deadlock when allocating page
  ocfs2: properly set and use inode group alloc hint
  ocfs2: Use the right group in nfs sync check.
  ocfs2: Flush drive's caches on fdatasync
  ocfs2: make __ocfs2_page_mkwrite handle file end properly.
  ocfs2: Fix incorrect checksum validation error
  ocfs2: Fix metaecc error messages

Changing state to CLOSING when FIN is received causes A0 cards to
hang.  Fix this by checking for A0 cards in FIN handling.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

When the driver receives an AE for FIN received, it closes the
connection without changing the state of the connection in the
hardware to closing.  By changing the state to closing, hardware will
do a normal close sequence.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

During a stress testing in a large cluster, multiple close event are
detected and BUG() is hit in the iWARP core.  The cause is that the
active node gave up while waiting for an MPA response from the peer
and tried to close the connection by sending RST.  The passive node
driver receives the RST but is waiting for MPA response from the user.
When the MPA accept is received, the driver offloads the connection
and sends a CLOSE event.  The driver gets an AE indicating RESET
received and also sends a CLOSE event, hitting a BUG().

Fix this by correcting RESET handling and sending CLOSE events.
Signed-off-by: Faisal Latif <faisal.latif@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

Setting TX pause param writes to the wrong register location causing
the adapter to hang.  Correct the define used to write the reigster.

Addresses: https://bugs.openfabrics.org/show_bug.cgi?id=2116Reported-by: Shiri Franchi <shirif@voltaire.com>
Signed-off-by: Chien Tung <chien.tin.tung@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: i8042 - fix device removal on unload
  Input: bcm5974 - adjust major/minor to scale
  Input: MT - initialize slots to unused
  Input: use PIT_TICK_RATE in vt beep ioctl
  Input: wacom - fix mousewheel handling for old wacom tablets

Merge branch 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'semaphore-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  semaphore: Add DEFINE_SEMAPHORE

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, mcheck: Avoid duplicate sysfs links/files for thresholding banks
  io-mapping: Fix the address space annotations
  x86: Fix the address space annotations of iomap_atomic_prot_pfn()
  x86, mm: Fix CONFIG_VMSPLIT_1G and 2G_OPT trampoline
  x86, hwmon: Fix unsafe smp_processor_id() in thermal_throttle_add_dev

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  gcc-4.6: kernel/*: Fix unused but set warnings
  mutex: Fix annotations to include it in kernel-locking docbook
  pid: make setpgid() system call use RCU read-side critical section
  MAINTAINERS: Add RCU's public git tree

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Try to handle unknown nmis with an enabled PMU
  perf, x86: Fix handle_irq return values
  perf, x86: Fix accidentally ack'ing a second event on intel perf counter
  oprofile, x86: fix init_sysfs() function stub
  lockup_detector: Sync touch_*_watchdog back to old semantics
  tracing: Fix a race in function profile
  oprofile, x86: fix init_sysfs error handling
  perf_events: Fix time tracking for events with pid != -1 and cpu != -1
  perf: Initialize callchains roots's childen hits
  oprofile: fix crash when accessing freed task structs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix lock annotations
  fuse: flush background queue on connection close

Dave Hylands reports:
| We've observed a problem with dma_alloc_writecombine when the system
| is under heavy load (heavy bus traffic).  We've managed to reduce the
| problem to the following snippet, which is run from a kthread in a
| continuous loop:
|
|   void *virtAddr;
|   dma_addr_t physAddr;
|   unsigned int numBytes = 256;
|
|   for (;;) {
|       virtAddr = dma_alloc_writecombine(NULL,
|             numBytes, &physAddr, GFP_KERNEL);
|       if (virtAddr == NULL) {
|          printk(KERN_ERR "Running out of memory\n");
|          break;
|       }
|
|       /* access DMA memory allocated */
|       tmp = virtAddr;
|       *tmp = 0x77;
|
|       /* free DMA memory */
|       dma_free_writecombine(NULL,
|             numBytes, virtAddr, physAddr);
|
|         ...sleep here...
|     }
|
| By itself, the code will run forever with no issues. However, as we
| increase our bus traffic (typically using DMA) then the *tmp = 0x77
| line will eventually cause a page fault. If we add a small delay (a
| few microseconds) before the *tmp = 0x77, then we don't see a page
| fault, even under heavy load.

A dsb() is required after modifying the PTE entries to ensure that they
will always be visible.  Add this dsb().
Reported-by: Dave Hylands <dhylands@gmail.com>
Tested-by: Dave Hylands <dhylands@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

The full cleanup of init_MUTEX[_LOCKED] and DECLARE_MUTEX has not been
done. Some of the users are real semaphores and we should name them as
such instead of confusing everyone with "MUTEX".

Provide the infrastructure to get finally rid of init_MUTEX[_LOCKED]
and DECLARE_MUTEX.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Hellwig <hch@infradead.org>
LKML-Reference: <20100907125054.795929962@linutronix.de>

Commit 7cfe2494 ("ARM: AMBA: Add pclk support to AMBA bus
infrastructure") changed AMBA bus to handle the PCLK automatically.
However, in EP93xx clock initialization is arch_initcall which is done
later than AMBA device identification. This causes
amba_get_enable_pclk() to fail resulting device where UARTs are not
functional.

So change ep93xx_clock_init() to be postcore_initcall.
Signed-off-by: Mika Westerberg <mika.westerberg@iki.fi>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

This reverts commit 4fa5518c, which causes a compilation regression for
IXP4xx platforms.
Reported-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Eric Miao <eric.y.miao@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ocfs2_create_inode_in_orphan() is used by reflink to create the newly
reflinked inode simultaneously in the orphan dir. This allows us to easily
handle partially-reflinked files during recovery cleanup.

We have a problem though - the orphan dir stringifies inode # to determine
a unique name under which the orphan entry dirent can be created. Since
ocfs2_create_inode_in_orphan() needs the space allocated in the orphan dir
before it can allocate the inode, we currently call into the orphan code:

       /*
        * We give the orphan dir the root blkno to fake an orphan name,
        * and allocate enough space for our insertion.
        */
       status = ocfs2_prepare_orphan_dir(osb, &orphan_dir,
                                         osb->root_blkno,
                                         orphan_name, &orphan_insert);

Using osb->root_blkno might work fine on unindexed directories, but the
orphan dir can have an index.  When it has that index, the above code fails
to allocate the proper index entry.  Later, when we try to remove the file
from the orphan dir (using the actual inode #), the reflink operation will
fail.

To fix this, I created a function ocfs2_alloc_orphaned_file() which uses the
newly split out orphan and inode alloc code to figure out what the inode
block number will be (once allocated) and then prepare the orphan dir from
that data.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

We do this because ocfs2_create_inode_in_orphan() wants to order locking of
the orphan dir with respect to locking of the inode allocator *before*
making any changes to the directory.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

This allows code which needs to know the eventual block number of an inode
but can't allocate it yet due to transaction or lock ordering. For example,
ocfs2_create_inode_in_orphan() currently gives a junk blkno for preparation
of the orphan dir because it can't yet know where the actual inode is placed
- that code is actually in ocfs2_mknod_locked. This is a problem when the
orphan dirs are indexed as the junk inode number will create an index entry
which goes unused (and fails the later removal from the orphan dir).  Now
with these interfaces, ocfs2_create_inode_in_orphan() can run the block
group search (and get back the inode block number) *before* any actual
allocation occurs.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

ocfs2_search_chain() makes the same updates as
ocfs2_alloc_dinode_update_counts to the alloc inode. Instead of open coding
the bitmap update, use our helper function.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

Do this by splitting the bulk of the function away from the inode allocation
code at the very tom of ocfs2_mknod_locked(). Existing callers don't need to
change and won't see any difference. The new function created,
__ocfs2_mknod_locked() will be used shortly.
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

The patch is to fix the regression bug brought from commit 6b933c8e...( 'ocfs2:
Avoid direct write if we fall back to buffered I/O'):

http://oss.oracle.com/bugzilla/show_bug.cgi?id=1285

The commit 6b933c8e changed __generic_file_aio_write
to generic_file_buffered_write, which didn't call filemap_{write,wait}_range to  flush
the pagecaches when we were falling O_DIRECT writes back to buffered ones. it did hurt
the O_DIRECT semantics somehow in extented odirect writes.

This patch tries to guarantee O_DIRECT writes of 'fall back to buffered' to be correctly
flushed.
Signed-off-by: Tristan Ye <tristan.ye@oracle.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

We cannot call grab_cache_page() when holding filesystem locks or with
a transaction started as grab_cache_page() calls page allocation with
GFP_KERNEL flag and thus page reclaim can recurse back into the filesystem
causing deadlocks or various assertion failures. We have to use
find_or_create_page() instead and pass it GFP_NOFS as we do with other
allocations.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

We were setting ac->ac_last_group in ocfs2_claim_suballoc_bits from
res->sr_bg_blkno.  Unfortunately, res->sr_bg_blkno is going to be zero under
normal (non-fragmented) circumstances. The discontig block group patches
effectively turned off that feature. Fix this by correctly calculating what
the next group hint should be.
Acked-by: Tao Ma <tao.ma@oracle.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.com>
Tested-by: Goldwyn Rodrigues <rgoldwyn@suse.de>
Signed-off-by: Tao Ma <tao.ma@oracle.com>

We have added discontig block group now, and now an inode
can be allocated in an discontig block group. So get
it in ocfs2_get_suballoc_slot_bit.

The old ocfs2_test_suballoc_bit gets group block no
from the allocation inode which is wrong. Fix it by
passing the right group.
Acked-by: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Tao Ma <tao.ma@oracle.com>