- 12 Sep, 2009 19 commits
-
-
Mike Christie authored
beiscsi does not need the iscsi scsi cmd processing. It does not even get this info on the completion path. This adds a function to just update the sequencing numbers and complete a task. Signed-off-by:
Mike Christie <michaelc@cs.wisc.edu> Signed-off-by:
Jayamohan Kallickal <jayamohank@serverengines.com> Signed-off-by:
James Bottomley <James.Bottomley@suse.de>
-
Moger, Babu authored
Patch to add debugging stuff for rdac device handler. - Added a bit mask "module parameter" rdac_logging with 2 bits for each type of logging. - currently defined only two types of logging(failover and sense logging). Can be enhanced later if required. - By default only failover logging is enabled which is equivalent of current logging. Signed-off-by:
Babu Moger <babu.moger@lsi.com> Reviewed-by:
Vijay Chauhan <vijay.chauhan@lsi.com> Reviewed-by:
Bob Stankey <Robert.stankey@lsi.com> Signed-off-by:
-
Moger, Babu authored
Adding the code to read the debug information during initialization. This patch collects the information about storage and controllers during rdac_activate. Signed-off-by:
-
Moger, Babu authored
Moving the initialization code from rdac_activate to rdac_bus_attach which is more efficient. We don't have to collect all the information during every activate. Signed-off-by:
-
Michal Schmidt authored
When the allocation fails in sg_build_indirect(), an oops happens in the error path. It's caused by an obvious typo. Signed-off-by:
Michal Schmidt <mschmidt@redhat.com> Reported-by:
Bob Tracy <rct@gherkin.frus.com> Acked-by:
Douglas Gilbert <dgilbert@interlog.com> Cc: Stable Tree <stable@kernel.org> Signed-off-by:
-
Kashyap, Desai authored
Bump version to 3.04.12 Signed-off-by: -
Kashyap, Desai authored
Normally In HBA reset path MPT driver will flush existing work in current work queue (mpt/0) . This is just a dummy activity for MPT driver point of view, since HBA reset will turn off Work queue events. It means we will simply returns from work queue without doing anything. But for the case where Work is already done (half the way), we have to have that work to be done. Considering above condition we stuck forever since Deadlock in scsi midlayer and MPT driver. sd_sync_cache() will wait forever since HBA is not in Running state, and it will never come into Running state since sd_sync_cache() is called from HBA reset context. Now new code will not wait for half cooked work to be finished before returning from HBA reset. Once we are out of HBA reset, EH thread will change host state to running from recovery and work waiting for running state of HBA will be finished. New code is turning ON firmware event from another special work called Rescan toplogy. Signed-off-by:
Kashyap Desai <kashyap.desai@lsi.com> Signed-off-by:
-
Kashyap, Desai authored
Driver is modified to return DID_NO_CONNECT for all pending I/O requests for bus type SAS, if it founds the target is removed at the firmware level. Signed-off-by:
-
Kashyap, Desai authored
This patch is solving problem for PAE kernel DMA operation. On PAE system dma_addr and unsigned long will have different values. Now dma_addr is not type casted using unsigned long. Signed-off-by:
-
Kashyap, Desai authored
On Big endian system kernel will crash due to address translation is not handle properly. Signed-off-by:
-
Kashyap, Desai authored
Check for phyinfo->phy before calling sas_port_delete_phy. Signed-off-by:
-
Charlie Brady authored
These storage arrays can use RDAC when configured with 'linux' as the initiator. http://www.sun.com/storage/disk_systems/workgroup/2500/ http://www.sun.com/storage/disk_systems/workgroup/2510/ http://www.sun.com/storage/disk_systems/workgroup/2530/Signed-off-by:
Charlie Brady <charlieb@budge.apana.org.au> Reviewed-by:
Chandra Seetharaman <sekharan@us.ibm.com> Signed-off-by:
-
Anil Ravindranath authored
Signed-off-by:
Anil Ravindranath <anil_ravindranath@pmc-sierra.com> Signed-off-by:
-
Giridhar Malavali authored
Signed-off-by:
Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Original code would inadvertently skip the deferred fc_remote_port_delete() call for rports hanging off any vport. Signed-off-by:
Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
* Consolidate vport-count processing. * Correct vp_idx restrictions during RSCN processing. * Push topology verification check to qla2x00_do_dpc_all_vps(). * Don't skip vport full-login-lip/lip-reset mailbox handling. Signed-off-by:
-
Lalit Chandivade authored
Original code would break-out of loop after only one iteration. Signed-off-by:
Lalit Chandivade <lalit.chandivade@qlogic.com> Signed-off-by:
-
Andrew Vasquez authored
Signed-off-by:
-
Santosh Vernekar authored
In fabric-login based on iop BIT_8 firmware notifies presence of a FCP2 device and not necessarily a TAPE device. So instead of setting FCF_TAPE_PRESENT flag there we set it using scsi_device->type after mid-layer scan recognises "type" of the device. It also adds a new flag FCF_FCP2_DEVICE for any future use. Signed-off-by:
-
- 10 Sep, 2009 21 commits
-
-
Joe Eykholt authored
This fixes one cause of an occational problem when unloading libfc where the exchange manager pool doesn't have all items freed. The existing WARN_ON(mp->total_exches <= 0) isn't hit. However, note that total_exches is decremented when the exchange is completed, and it can be held with a refcnt for a while after that. I'm not sure what the offending exchange is, but I suspect it is an incoming request, because outgoing state machines should be all stopped at this point. Note that although receive is stopped before the exchange manager is freed, there could still be active threads handling received frames. This patch flushes the queues by allocating a new skb and sending it through, and have the thread handle this new skb specially. This is similar to the way the work queues are flushed now by putting work items in them and waiting until they make it through the queue. An skb->destructor function is used to inform us of the completion of the flush, and the fr_dev() is left NULL to indicate to fcoe_percpu_receive_thread() that the skb should be just freed. There's already a check for the lp being NULL which prints a message. We skip printing the message if the destructor is for flushing. Signed-off-by:
Joe Eykholt <jeykholt@cisco.com> Signed-off-by:
Robert Love <robert.w.love@intel.com> Signed-off-by:
-
Joe Eykholt authored
I saw an lport debug message from the exchange manager saying: "lport 70500: Received response for out of range oxid:ffff" A trace showed this was a BA_RJT sent due to an incoming ABTS which arrived on an unknown exchange. So, the sender of the BA_RJT was in error, but in this case, both the initiator and responder were the same machine. The OX_ID and RX_ID should not have been reversed in this case. Signed-off-by:
-
Joe Eykholt authored
When an RSCN indicates changes to individual remote ports, don't blindly log them out and then back in. Instead, determine whether they're still in the directory, by doing GPN_ID. If that is successful, call login, which will send ADISC and reverify, otherwise, call logoff. Perhaps we should just delete the rport, not send LOGO, but it seems safer. Also, fix a possible issue where if a mix of records in the RSCN cause us to queue disc_ports for disc_single and then we decide to do full rediscovery, we leak memory for those disc_ports queued. So, go through the list of disc_ports even if doing full discovery. Free the disc_ports in any case. If any of the disc_single() calls return error, do a full discovery. The ability to fill in GPN_ID requests was added to fc_ct_fill(). For this, it needs the FC_ID to be passed in as an arg. The did parameter for fc_elsct_send() is used for that, since the actual D_DID will always be 0xfffffc for all CT requests so far. Signed-off-by:
-
Joe Eykholt authored
The local port facility has been replying to ADISC requests without looking to see if the remote port is logged in. This is incorrect. An ADISC request requires PLOGI first. It should be rejected if the sending remote port is not logged in. This is like other incoming requests that require login, all of which should be handled in the remote port module. Move the ADISC request handling from fc_lport.c to fc_rport.c. Signed-off-by:
-
Joe Eykholt authored
When rport_login is called on an rport that is already thought to be logged in, use ADISC. If that fails, redo PLOGI. This is less disruptive after fabric changes that don't affect the state of the target. Implement the sending of ADISC via fc_els_fill. Add ADISC state to the rport state machine. This is entered from READY and returns to READY after successful completion. If it fails, the rport is either logged off and deleted or re-does PLOGI. Signed-off-by:
-
Joe Eykholt authored
fc_rport_logo_resp() had a call to fc_rport_enter_rtv() if the LOGO was accepted. This must've been a copy/paste mistake, but it didn't matter since we don't stay in the LOGO state long enough to hit this code. Change fc_rport_logo_resp() to just enter the delete state no matter what. Signed-off-by:
-
Joe Eykholt authored
After a quick link flap, a target was seen to send us a LOGO. Apparently, it saw an RSCN reporting that we had dropped out of the fabric after we had logged back into it. This is likely in larger fabrics (more than 2 FC switches) after a quick link flap at the initiator. Each link transition causes an port-specific RSCN to the target. After the link comes back up, the initiator successfully discovers and does a PLOGI to the target before the target sees the first RSCN reporting the initiator is gone, and it sends a LOGO. The target may see a subsequent RSCN saying the port is back, but probably wouldn't send a PLOGI and leaves it up to the initiator to re-login. An RSCN can be delayed by the switches due to software layers but a PLOGI is forwarded in hardware causing the PLOGI to beat the RSCN. If a remote port is in the discovered set and sends a LOGO, re-login to it. Signed-off-by:
-
Joe Eykholt authored
When receiving an ELS request, if the request isn't recognized, the unsupported operation error should be given even if the port is not found or not logged in. Also, the LOGO request shouldn't give the login-required explanation. Signed-off-by:
-
Joe Eykholt authored
libfc receives PLOGIs from switches which are trying to discover what kind of devices are present, and from other initiators to find out if we're a target. As an initiator, some argue we don't need to handle incoming PLOGI requests, and we currently reject them from unknown remote ports, but accept them is we're in the middle of a PLOGI to the remote port. For eventual target implementations, we want to handle them always. For incoming PLOGI, don't fail if the rport_priv doesn't exist. Just create it and go become READY without going through PRLI. If PRLI occurs, then our roles will be set and we'll become READY again. Also, allow incoming PRLI in RTV state. Signed-off-by:
-
Joe Eykholt authored
Improve lport and rport debug messages to indicate whether the response is LS_ACC, LS_RJT, closed, or timeout. Signed-off-by:
-
Joe Eykholt authored
The rport_lookup function must be called while holding the disc_mutex. Otherwise, the rdata could be deleted just after that by another thread. All callers now check the state after grabbing the rdata rp_mutex. Even though rport_lookup skips ports in DELETE state, it does that without holding the rdata rp_mutex, so that the state may change. Signed-off-by:
-
Joe Eykholt authored
This moves the remote port lookup for incoming ELS requests into fc_rport.c, in preparation for handing PLOGI and LOGO from unknown rports. This changes the arg to rport_recv_req from an rdata to an lport. Signed-off-by:
-
Robert Love authored
Don't trust previous roles, reset them when we receive a PRLI. Signed-off-by:
-
Robert Love authored
Currently these values are initialized by the callers. This was exposed by a later patch that adds PLOGI request support. The patch failed to initialize the new remote port's roles and it caused problems. This patch has the rport_create routine initialize the identifiers and then the callers can override them with real values. Signed-off-by:
-
Joe Eykholt authored
It's possible to "restart" discovery before it was started if an RSCN is received early enough. We were jumping to 0 due to the disc_callback function pointer not getting set. Don't restart discovery if disc_callback is NULL. Signed-off-by:
-
Joe Eykholt authored
The discovery code had a special-case for the point-to-point mode, which used a bunch of code that wasn't really needed. Now that rport_create adds the rport to the discovery list, completely skip discovery for the point-to-point case. Signed-off-by:
-
Joe Eykholt authored
In fc_disc_gpn_ft_parse(), after fc_disc_done() is called, the disc state is changed by setting buf_len = 0. This is wrong since the discovery may have restarted. Instead, return after calling fc_disc_done. Also, return an error on memory allocation failure. Signed-off-by:
-
Joe Eykholt authored
Currently fc_disc_timeout() restarts discovery only if it is not pending. When the timer is scheduled, the discovery is left pending, so the timeout never restarts it. Fix by not checking for pending in the timeout handler. If discovery is stopped and restarted in the meantime, the timeout will be canceled. Also, when a new discovery is started, the retry count wasn't cleared. Signed-off-by:
-
Joe Eykholt authored
On some switches, an empty zone causes GPN_FT to be rejected with reason 9 (unable) explanation 7 (FC-4 types not registered), which causes discovery to be retried endlessly. Treat this as just an empty response and consider discovery complete. Signed-off-by:
-
Joe Eykholt authored
Abhijeet Joglekar wrote: "In gpn_ft_resp, if the payload is short, or unexpected response or out of sequence frame, then we just return and do nothing. We should either enter fc_disc_done() with DISC_EV_FAIL which will then restart any queued discovery requests or call lport module which will reset local port, or we should call fc_disc_error() so that the gpn_ft is retried. The situation as is causes discovery to remain pending and never get restarted, in these rare cases. We saw this due to a coding bug in fc_disc before. The only ways it could happen would be bugs, packet corruption or an FC fabric problem. Change it to fail discovery. The local port will restart discovery, although it probably should just give up until the next link flap. Signed-off-by:
-
Joe Eykholt authored
Code cleanup for fc_disc_gpn_ft_resp(). Some of the fc_disc.c code was poorly formatted. For example, some lines in fc_disc.c were unnecessarily truncated and the buf variable could be eliminated. Also moved the increment of seq_count into fc_disc_gpn_ft_parse(), to avoid doing it separately before each call. Signed-off-by:
-
