- 15 Nov, 2020 16 commits
-
-
Ido Schimmel authored
Instead of passing the route and resolving the nexthop netdev from it, pass the nexthop netdev directly. This will later allow us to consolidate code paths between IPv4 and IPv6 code. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Ido Schimmel authored
The overlay protocol (i.e., IPv4/IPv6) that is being encapsulated has no impact on whether a certain IP tunnel can be offloaded or not. Only the underlay protocol matters. Therefore, remove the unused overlay protocol parameter from the callback. This will later allow us to consolidate code paths between IPv4 and IPv6 code. Signed-off-by:
-
Ido Schimmel authored
Currently, the individual nexthops member in the group and attributes of the group (e.g., its type) are stored in the same struct (i.e., 'struct mlxsw_sp_nexthop_group'). This is fine since the individual nexthops cannot change during the lifetime of the group. With nexthop objects this is no longer the case. An existing nexthop group can be replaced to use a new set of nexthops. Creating a new struct whenever a group is replaced entails replacing the group pointer of all the routes (i.e., 'struct mlxsw_sp_fib_entry') using the group. Avoid this inefficient step by splitting the nexthop group configuration to a different struct (i.e., 'struct mlxsw_sp_nexthop_group_info'). When a nexthop group is replaced a new group info struct is created and the individual rotues do not need to be touched. Illustration after the change: mlxsw_sp_fib_entry mlxsw_sp_nexthop_group mlxsw_sp_nexthop_group_info +-------------------+ +----------------------+ +---------------------------+ | nh_group; +--> nhgi; +--> | | | | | | | +-------------------+ +----------------------+ +---------------------------+ No functional changes intended. Signed-off-by:
-
Ido Schimmel authored
Instead of storing the FIB info as 'priv' when the nexthop group represents an IPv4 nexthop group, simply store it as a FIB info with a proper comment. When nexthop objects are supported, this field will become a union with the nexthop object's identifier. Signed-off-by:
-
Ido Schimmel authored
Not used anywhere. Signed-off-by:
-
Ido Schimmel authored
When needed, IPv4 routes fetch the FIB info (i.e., 'struct fib_info') from their associated nexthop group. This will not work when the nexthop group represents a nexthop object (i.e., 'struct nexthop'), as it will only have access to the nexthop's identifier. Instead, store the FIB info in the route itself. Signed-off-by:
-
Ido Schimmel authored
As explained in the previous patch, nexthop objects can have both IPv4 and IPv6 nexthops in the same group. Therefore, move the neighbour table to be a property of the nexthop instead of the nexthop group. Signed-off-by:
-
Ido Schimmel authored
Both IPv4 and IPv6 nexthop groups are hashed in the same table. The protocol field is used to indicate how the hash should be computed for each group. When nexthop group objects are supported, the hash will be computed for them based on the nexthop identifier. To differentiate between all the nexthop group types, encode the type of the group in the key instead of the protocol. Signed-off-by:
-
Ido Schimmel authored
Currently, the type (i.e., IPv4/IPv6) of the nexthop group is derived from the neighbour table associated with the group. This is problematic when nexthop objects are taken into account, as a nexthop group object can contain both IPv4 and IPv6 nexthops. Instead, add a new field that indicates the type of the group and initialize it during the group's creation. Currently, the types are IPv4 ('struct fib_info') and IPv6 ('struct fib6_info'). In the future another type will be added for nexthop objects ('struct nexthop'). Signed-off-by: -
Ido Schimmel authored
When comparing a key with a nexthop group in rhastable's obj_cmpfn() callback, make sure that the key and nexthop group are of the same type (i.e., IPv4 / IPv6). The bug is not currently visible because IPv6 nexthop groups do not populate the FIB info pointer and IPv4 nexthop groups do not set the ifindex for the individual nexthops. Signed-off-by:
-
Alex Shi authored
We don't use the parameter result actually, so better to remove it and skip a gcc warning for unused variable. Signed-off-by:
Alex Shi <alex.shi@linux.alibaba.com> Link: https://lore.kernel.org/r/1605239517-49707-1-git-send-email-alex.shi@linux.alibaba.comSigned-off-by:
-
Eric Dumazet authored
These functions do not need to be exported. Signed-off-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201113113553.3411756-1-eric.dumazet@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== tcp: avoid indirect call in __sk_stream_memory_free() Small improvement for CONFIG_RETPOLINE=y, when dealing with TCP sockets. ==================== Link: https://lore.kernel.org/r/20201113150809.3443527-1-eric.dumazet@gmail.comSigned-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
Eric Dumazet authored
Both IPv4 and IPv6 needs it via a function pointer. Following patch will avoid the indirect call. Signed-off-by:
-
Oliver Herms authored
This patch adds an IPv4 routes encapsulation attribute to the result of netlink RTM_GETROUTE requests (e.g. ip route get 192.0.2.1). Signed-off-by:
Oliver Herms <oliver.peter.herms@gmail.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20201113085517.GA1307262@twsSigned-off-by:
-
- 14 Nov, 2020 22 commits
-
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic updates These updates are a bit of code cleaning and a minor bit of performance tweaking. v3: convert ionic_lif_quiesce() to void v2: added void cast on call to ionic_lif_quiesce() lowered batching threshold added patch to flatten calls to ionic_lif_rx_mode added patch to change from_ndo to can_sleep ==================== Link: https://lore.kernel.org/r/20201112182208.46770-1-snelson@pensando.ioSigned-off-by: -
Shannon Nelson authored
With a few more uses of true and false in function calls, we need to give them some useful names so we can tell from the calling point what we're doing. Signed-off-by:
Shannon Nelson <snelson@pensando.io> Reviewed-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
-
Shannon Nelson authored
Instead of having two different ways of expressing the same sleepability concept, using opposite logic, we can rework the from_ndo to can_sleep for a more consistent usage. Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.") Signed-off-by:
-
Shannon Nelson authored
The _ionic_lif_rx_mode() is only used once and really doesn't need to be broken out. Signed-off-by:
-
Shannon Nelson authored
We should be using the multicast sync routines for the multicast filters. Also, let's just flatten the logic a bit and pull the small unicast routine back into ionic_set_rx_mode(). Fixes: 1800eee1 ("net: ionic: Replace in_interrupt() usage.") Signed-off-by:
-
Shannon Nelson authored
We don't need to refill the rx descriptors on every napi if only a few were handled. Waiting until we can batch up a few together will save us a few Rx cycles. Signed-off-by:
-
Shannon Nelson authored
After the queues are stopped, expressly quiesce the lif. This assures that even if the queues were in an odd state, the firmware will close up everything cleanly. Signed-off-by:
-
Shannon Nelson authored
Request a link check as soon as the netdev is registered rather than waiting for the watchdog to go off in order to get the interface operational a little more quickly. Signed-off-by:
-
Shannon Nelson authored
Change the order of operations in the link_up handling to be sure that the queues are up and ready before we announce that the link is up. Signed-off-by:
-
YueHaibing authored
Check PTR_ERR with IS_ERR to fix this. Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20201112144936.54776-1-yuehaibing@huawei.comSigned-off-by:
-
Lukas Bulwahn authored
Commit bdb7cc64 ("ipv6: Count interface receive statistics on the ingress netdev") removed all callees for ipv6_skb_idev(). Hence, since then, ipv6_skb_idev() is unused and make CC=clang W=1 warns: net/ipv6/exthdrs.c:909:33: warning: unused function 'ipv6_skb_idev' [-Wunused-function] So, remove this unused function and a -Wunused-function warning. Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Link: https://lore.kernel.org/r/20201113135012.32499-1-lukas.bulwahn@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-11-14 1) Add BTF generation for kernel modules and extend BTF infra in kernel e.g. support for split BTF loading and validation, from Andrii Nakryiko. 2) Support for pointers beyond pkt_end to recognize LLVM generated patterns on inlined branch conditions, from Alexei Starovoitov. 3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh. 4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage infra, from Martin KaFai Lau. 5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the XDP_REDIRECT path, from Lorenzo Bianconi. 6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI context, from Song Liu. 7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build for different target archs on same source tree, from Jean-Philippe Brucker. 8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet. 9) Move functionality from test_tcpbpf_user into the test_progs framework so it can run in BPF CI, from Alexander Duyck. 10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner. Note that for the fix from Song we have seen a sparse report on context imbalance which requires changes in sparse itself for proper annotation detection where this is currently being discussed on linux-sparse among developers [0]. Once we have more clarification/guidance after their fix, Song will follow-up. [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/ https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/ * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits) net: mlx5: Add xdp tx return bulking support net: mvpp2: Add xdp tx return bulking support net: mvneta: Add xdp tx return bulking support net: page_pool: Add bulk support for ptr_ring net: xdp: Introduce bulking for xdp tx return path bpf: Expose bpf_d_path helper to sleepable LSM hooks bpf: Augment the set of sleepable LSM hooks bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Rename some functions in bpf_sk_storage bpf: Folding omem_charge() into sk_storage_charge() selftests/bpf: Add asm tests for pkt vs pkt_end comparison. selftests/bpf: Add skb_pkt_end test bpf: Support for pointers beyond pkt_end. tools/bpf: Always run the *-clean recipes tools/bpf: Add bootstrap/ to .gitignore bpf: Fix NULL dereference in bpf_task_storage tools/bpftool: Fix build slowdown tools/runqslower: Build bpftool using HOSTCC tools/runqslower: Enable out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.netSigned-off-by:
-
Steen Hegelund authored
Add VSC8572 and VSC8574 in the PTP configuration as they also support PTP. The relevant datasheets can be found here: - VSC8572: https://www.microchip.com/wwwproducts/en/VSC8572 - VSC8574: https://www.microchip.com/wwwproducts/en/VSC8574Signed-off-by:
Steen Hegelund <steen.hegelund@microchip.com> Link: https://lore.kernel.org/r/20201112092250.914079-1-steen.hegelund@microchip.comSigned-off-by:
-
Daniel Borkmann authored
Lorenzo Bianconi says: ==================== XDP bulk APIs introduce a defer/flush mechanism to return pages belonging to the same xdp_mem_allocator object (identified via the mem.id field) in bulk to optimize I-cache and D-cache since xdp_return_frame is usually run inside the driver NAPI tx completion loop. Convert mvneta, mvpp2 and mlx5 drivers to xdp_return_frame_bulk APIs. More details on benchmarks run on mlx5 can be found here: https://github.com/xdp-project/xdp-project/blob/master/areas/mem/xdp_bulk_return01.org Changes since v5: - do not keep looping over ptr_ring if the cache is full but release leftover pages running page_pool_return_page Changes since v4: - fix comments - introduce xdp_frame_bulk_init utility routine - compiler annotations for I-cache code layout - move rcu_read_lock outside fast-path - mlx5 xdp bulking code optimization Changes since v3: - align DEV_MAP_BULK_SIZE to XDP_BULK_QUEUE_SIZE - refactor page_pool_put_page_bulk to avoid code duplication Changes since v2: - move mvneta changes in a dedicated patch Changes since v1: - improve comments - rework xdp_return_frame_bulk routine logic - move count and xa fields at the beginning of xdp_frame_bulk struct - invert logic in page_pool_put_page_bulk for loop ==================== Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Jesper Dangaard Brouer <brouer@redhat.com>
-
Lorenzo Bianconi authored
Convert mlx5 driver to xdp_return_frame_bulk APIs. XDP_REDIRECT (upstream codepath): 8.9Mpps XDP_REDIRECT (upstream codepath + bulking APIs): 10.2Mpps Co-developed-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/250460319fd868b7b5668fc1deca74dd42813a90.1605267335.git.lorenzo@kernel.org
-
Lorenzo Bianconi authored
Convert mvpp2 driver to xdp_return_frame_bulk APIs. XDP_REDIRECT (upstream codepath): 1.79Mpps XDP_REDIRECT (upstream codepath + bulking APIs): 1.93Mpps Co-developed-by:
Matteo Croce <mcroce@microsoft.com> Acked-by:
-
Lorenzo Bianconi authored
Convert mvneta driver to xdp_return_frame_bulk APIs. XDP_REDIRECT (upstream codepath): 275Kpps XDP_REDIRECT (upstream codepath + bulking APIs): 284Kpps Co-developed-by:
-
Lorenzo Bianconi authored
Introduce the capability to batch page_pool ptr_ring refill since it is usually run inside the driver NAPI tx completion loop. Suggested-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Link: https://lore.kernel.org/bpf/08dd249c9522c001313f520796faa777c4089e1c.1605267335.git.lorenzo@kernel.org
-
Lorenzo Bianconi authored
XDP bulk APIs introduce a defer/flush mechanism to return pages belonging to the same xdp_mem_allocator object (identified via the mem.id field) in bulk to optimize I-cache and D-cache since xdp_return_frame is usually run inside the driver NAPI tx completion loop. The bulk queue size is set to 16 to be aligned to how XDP_REDIRECT bulking works. The bulk is flushed when it is full or when mem.id changes. xdp_frame_bulk is usually stored/allocated on the function call-stack to avoid locking penalties. Current implementation considers only page_pool memory model. Suggested-by:
-
Jisheng Zhang authored
Use the devm_reset_control_get_optional() and devm_clk_get_optional() rather than open coding them. Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Link: https://lore.kernel.org/r/20201112092606.5173aa6f@xhacker.debianSigned-off-by:
-
Heiner Kallweit authored
We can simplify the for() condition and eliminate variable tx_left. The change also considers that tp->cur_tx may be incremented by a racing rtl8169_start_xmit(). In addition replace the write to tp->dirty_tx and the following smp_mb() with an equivalent call to smp_store_mb(). This implicitly adds a WRITE_ONCE() to the write. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/c2e19e5e-3d3f-d663-af32-13c3374f5def@gmail.comSigned-off-by:
-
Heiner Kallweit authored
tp->dirty_tx and tp->cur_tx may be changed by a racing rtl_tx() or rtl8169_start_xmit(). Use READ_ONCE() to annotate the races and ensure that the compiler doesn't use cached values. Signed-off-by:
-
- 13 Nov, 2020 2 commits
-
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: two fixes This small series makes two fixes to the IPA code: - While reviewing something else I found that one of the resource limits on the SDM845 used the wrong value. The first patch fixes this. The correct value allocates more resources of this type for IPA to use, and otherwise does not change behavior. - When the IPA-resident microcontroller starts up it generates an event, which triggers an AP interrupt. The event merely provides some information for logging, which we don't support. We already ignore the event, and that's harmless. So this patch explicitly ignores it rather than issuing a warning when it occurs. ==================== Link: https://lore.kernel.org/r/20201112121157.19784-1-elder@linaro.orgSigned-off-by: -
Alex Elder authored
The IPA-resident microcontroller has the ability to log various activity in an area of IPA shared memory. When the microcontroller starts it generates an event to the AP to provide information about the log. We don't support reading this log, and we can safely ignore the event. So do that rather than treating the log info event we receive as "unsupported." Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
