- 18 Mar, 2015 40 commits
-
-
Johan Hovold authored
commit db81de76 upstream. Fix null-pointer dereference at probe when the device is used as a console, in which case the tty argument to open will be NULL. Fixes: ee467a1f ("USB: serial: add Moxa UPORT 12XX/14XX/16XX driver") Signed-off-by:
Johan Hovold <johan@kernel.org> Acked-by:
Greg Kroah-Hartman <greg@kroah.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michiel vd Garde authored
commit 675af708 upstream. These device ID's are not associated with the cp210x module currently, but should be. This patch allows the devices to operate upon connecting them to the usb bus as intended. Signed-off-by:
Michiel van de Garde <mgparser@gmail.com> Signed-off-by:
-
Johan Hovold authored
commit bc4b1f48 upstream. This reverts commit 5083fd7b. A bulk-out size smaller than the end-point size is indeed valid. The offending commit broke the usb-debug driver for EHCI debug devices, which use 8-byte buffers. Fixes: 5083fd7b ("USB: serial: make bulk_out_size a lower limit") Reported-by:
"Li, Elvin" <elvin.li@intel.com> Signed-off-by:
-
Hans de Goede authored
commit 59e980ef upstream. Like the JMicron JMS567 enclosures with the JMS539 choke on report-opcodes, so avoid it. Tested-and-reported-by:
Tom Arild Naess <tanaess@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
James Hogan authored
commit b3cffac0 upstream. Currently the guest exit trace event saves the VCPU pointer to the structure, and the guest PC is retrieved by dereferencing it when the event is printed rather than directly from the trace record. This isn't safe as the printing may occur long afterwards, after the PC has changed and potentially after the VCPU has been freed. Usually this results in the same (wrong) PC being printed for multiple trace events. It also isn't portable as userland has no way to access the VCPU data structure when interpreting the trace record itself. Lets save the actual PC in the structure so that the correct value is accessible later. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 4ff6f8e6 upstream. This has been broken for a long time: it broke first in 2.6.35, then was almost fixed in 2.6.36 but this one-liner slipped through the cracks. The bug shows up as an infinite loop in Windows 7 (and newer) boot on 32-bit hosts without EPT. Windows uses CMPXCHG8B to write to page tables, which causes a page fault if running without EPT; the emulator is then called from kvm_mmu_page_fault. The loop then happens if the higher 4 bytes are not 0; the common case for this is that the NX bit (bit 63) is 1. Fixes: 6550e1f1 Fixes: 16518d5aReported-by:
Erik Rull <erik.rull@rdsoftware.de> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Quentin Casasnovas authored
commit dd9ef135 upstream. Improper arithmetics when calculting the address of the extended ref could lead to an out of bounds memory read and kernel panic. Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Reviewed-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Filipe Manana authored
commit 3a8b36f3 upstream. When using the fast file fsync code path we can miss the fact that new writes happened since the last file fsync and therefore return without waiting for the IO to finish and write the new extents to the fsync log. Here's an example scenario where the fsync will miss the fact that new file data exists that wasn't yet durably persisted: 1. fs_info->last_trans_committed == N - 1 and current transaction is transaction N (fs_info->generation == N); 2. do a buffered write; 3. fsync our inode, this clears our inode's full sync flag, starts an ordered extent and waits for it to complete - when it completes at btrfs_finish_ordered_io(), the inode's last_trans is set to the value N (via btrfs_update_inode_fallback -> btrfs_update_inode -> btrfs_set_inode_last_trans); 4. transaction N is committed, so fs_info->last_trans_committed is now set to the value N and fs_info->generation remains with the value N; 5. do another buffered write, when this happens btrfs_file_write_iter sets our inode's last_trans to the value N + 1 (that is fs_info->generation + 1 == N + 1); 6. transaction N + 1 is started and fs_info->generation now has the value N + 1; 7. transaction N + 1 is committed, so fs_info->last_trans_committed is set to the value N + 1; 8. fsync our inode - because it doesn't have the full sync flag set, we only start the ordered extent, we don't wait for it to complete (only in a later phase) therefore its last_trans field has the value N + 1 set previously by btrfs_file_write_iter(), and so we have: inode->last_trans <= fs_info->last_trans_committed (N + 1) (N + 1) Which made us not log the last buffered write and exit the fsync handler immediately, returning success (0) to user space and resulting in data loss after a crash. This can actually be triggered deterministically and the following excerpt from a testcase I made for xfstests triggers the issue. It moves a dummy file across directories and then fsyncs the old parent directory - this is just to trigger a transaction commit, so moving files around isn't directly related to the issue but it was chosen because running 'sync' for example does more than just committing the current transaction, as it flushes/waits for all file data to be persisted. The issue can also happen at random periods, since the transaction kthread periodicaly commits the current transaction (about every 30 seconds by default). The body of the test is: _scratch_mkfs >> $seqres.full 2>&1 _init_flakey _mount_flakey # Create our main test file 'foo', the one we check for data loss. # By doing an fsync against our file, it makes btrfs clear the 'needs_full_sync' # bit from its flags (btrfs inode specific flags). $XFS_IO_PROG -f -c "pwrite -S 0xaa 0 8K" \ -c "fsync" $SCRATCH_MNT/foo | _filter_xfs_io # Now create one other file and 2 directories. We will move this second file # from one directory to the other later because it forces btrfs to commit its # currently open transaction if we fsync the old parent directory. This is # necessary to trigger the data loss bug that affected btrfs. mkdir $SCRATCH_MNT/testdir_1 touch $SCRATCH_MNT/testdir_1/bar mkdir $SCRATCH_MNT/testdir_2 # Make sure everything is durably persisted. sync # Write more 8Kb of data to our file. $XFS_IO_PROG -c "pwrite -S 0xbb 8K 8K" $SCRATCH_MNT/foo | _filter_xfs_io # Move our 'bar' file into a new directory. mv $SCRATCH_MNT/testdir_1/bar $SCRATCH_MNT/testdir_2/bar # Fsync our first directory. Because it had a file moved into some other # directory, this made btrfs commit the currently open transaction. This is # a condition necessary to trigger the data loss bug. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/testdir_1 # Now fsync our main test file. If the fsync succeeds, we expect the 8Kb of # data we wrote previously to be persisted and available if a crash happens. # This did not happen with btrfs, because of the transaction commit that # happened when we fsynced the parent directory. $XFS_IO_PROG -c "fsync" $SCRATCH_MNT/foo # Simulate a crash/power loss. _load_flakey_table $FLAKEY_DROP_WRITES _unmount_flakey _load_flakey_table $FLAKEY_ALLOW_WRITES _mount_flakey # Now check that all data we wrote before are available. echo "File content after log replay:" od -t x1 $SCRATCH_MNT/foo status=0 exit The expected golden output for the test, which is what we get with this fix applied (or when running against ext3/4 and xfs), is: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 8192/8192 bytes at offset 8192 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb * 0040000 Without this fix applied, the output shows the test file does not have the second 8Kb extent that we successfully fsynced: wrote 8192/8192 bytes at offset 0 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) wrote 8192/8192 bytes at offset 8192 XXX Bytes, X ops; XX:XX:XX.X (XXX YYY/sec and XXX ops/sec) File content after log replay: 0000000 aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa aa * 0020000 So fix this by skipping the fsync only if we're doing a full sync and if the inode's last_trans is <= fs_info->last_trans_committed, or if the inode is already in the log. Also remove setting the inode's last_trans in btrfs_file_write_iter since it's useless/unreliable. Also because btrfs_file_write_iter no longer sets inode->last_trans to fs_info->generation + 1, don't set last_trans to 0 if we bail out and don't bail out if last_trans is 0, otherwise something as simple as the following example wouldn't log the second write on the last fsync: 1. write to file 2. fsync file 3. fsync file |--> btrfs_inode_in_log() returns true and it set last_trans to 0 4. write to file |--> btrfs_file_write_iter() no longers sets last_trans, so it remained with a value of 0 5. fsync |--> inode->last_trans == 0, so it bails out without logging the second write A test case for xfstests will be sent soon. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Signed-off-by:
-
David Sterba authored
commit 1932b7be upstream. A block-local variable stores error code but btrfs_get_blocks_direct may not return it in the end as there's a ret defined in the function scope. Fixes: d187663e ("Btrfs: lock extents as we map them in DIO") Signed-off-by:
-
Filipe Manana authored
commit 4d884fce upstream. We can have multiple fsync operations against the same file during the same transaction and they can collect the same ordered extents while they don't complete (still accessible from the inode's ordered tree). If this happens, those ordered extents will never get their reference counts decremented to 0, leading to memory leaks and inode leaks (an iput for an ordered extent's inode is scheduled only when the ordered extent's refcount drops to 0). The following sequence diagram explains this race: CPU 1 CPU 2 btrfs_sync_file() btrfs_sync_file() mutex_lock(inode->i_mutex) btrfs_log_inode() btrfs_get_logged_extents() --> collects ordered extent X --> increments ordered extent X's refcount btrfs_submit_logged_extents() mutex_unlock(inode->i_mutex) mutex_lock(inode->i_mutex) btrfs_sync_log() btrfs_wait_logged_extents() --> list_del_init(&ordered->log_list) btrfs_log_inode() btrfs_get_logged_extents() --> Adds ordered extent X to logged_list because at this point: list_empty(&ordered->log_list) && test_bit(BTRFS_ORDERED_LOGGED, &ordered->flags) == 0 --> Increments ordered extent X's refcount --> check if ordered extent's io is finished or not, start it if necessary and wait for it to finish --> sets bit BTRFS_ORDERED_LOGGED on ordered extent X's flags and adds it to trans->ordered btrfs_sync_log() finishes btrfs_submit_logged_extents() btrfs_log_inode() finishes mutex_unlock(inode->i_mutex) btrfs_sync_file() finishes btrfs_sync_log() btrfs_wait_logged_extents() --> Sees ordered extent X has the bit BTRFS_ORDERED_LOGGED set in its flags --> X's refcount is untouched btrfs_sync_log() finishes btrfs_sync_file() finishes btrfs_commit_transaction() --> called by transaction kthread for e.g. btrfs_wait_pending_ordered() --> waits for ordered extent X to complete --> decrements ordered extent X's refcount by 1 only, corresponding to the increment done by the fsync task ran by CPU 1 In the scenario of the above diagram, after the transaction commit, the ordered extent will remain with a refcount of 1 forever, leaking the ordered extent structure and preventing the i_count of its inode from ever decreasing to 0, since the delayed iput is scheduled only when the ordered extent's refcount drops to 0, preventing the inode from ever being evicted by the VFS. Fix this by using the flag BTRFS_ORDERED_LOGGED differently. Use it to mean that an ordered extent is already being processed by an fsync call, which will attach it to the current transaction, preventing it from being collected by subsequent fsync operations against the same inode. This race was introduced with the following change (added in 3.19 and backported to stable 3.18 and 3.17): Btrfs: make sure logged extents complete in the current transaction V3 commit 50d9aa99 I ran into this issue while running xfstests/generic/113 in a loop, which failed about 1 out of 10 runs with the following warning in dmesg: [ 2612.440038] WARNING: CPU: 4 PID: 22057 at fs/btrfs/disk-io.c:3558 free_fs_root+0x36/0x133 [btrfs]() [ 2612.442810] Modules linked in: btrfs crc32c_generic xor raid6_pq nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc loop processor parport_pc parport psmouse therma l_sys i2c_piix4 serio_raw pcspkr evdev microcode button i2c_core ext4 crc16 jbd2 mbcache sd_mod sg sr_mod cdrom virtio_scsi ata_generic virtio_pci ata_piix virtio_ring libata virtio flo ppy e1000 scsi_mod [last unloaded: btrfs] [ 2612.452711] CPU: 4 PID: 22057 Comm: umount Tainted: G W 3.19.0-rc5-btrfs-next-4+ #1 [ 2612.454921] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 [ 2612.457709] 0000000000000009 ffff8801342c3c78 ffffffff8142425e ffff88023ec8f2d8 [ 2612.459829] 0000000000000000 ffff8801342c3cb8 ffffffff81045308 ffff880046460000 [ 2612.461564] ffffffffa036da56 ffff88003d07b000 ffff880046460000 ffff880046460068 [ 2612.463163] Call Trace: [ 2612.463719] [<ffffffff8142425e>] dump_stack+0x4c/0x65 [ 2612.464789] [<ffffffff81045308>] warn_slowpath_common+0xa1/0xbb [ 2612.466026] [<ffffffffa036da56>] ? free_fs_root+0x36/0x133 [btrfs] [ 2612.467247] [<ffffffff810453c5>] warn_slowpath_null+0x1a/0x1c [ 2612.468416] [<ffffffffa036da56>] free_fs_root+0x36/0x133 [btrfs] [ 2612.469625] [<ffffffffa036f2a7>] btrfs_drop_and_free_fs_root+0x93/0x9b [btrfs] [ 2612.471251] [<ffffffffa036f353>] btrfs_free_fs_roots+0xa4/0xd6 [btrfs] [ 2612.472536] [<ffffffff8142612e>] ? wait_for_completion+0x24/0x26 [ 2612.473742] [<ffffffffa0370bbc>] close_ctree+0x1f3/0x33c [btrfs] [ 2612.475477] [<ffffffff81059d1d>] ? destroy_workqueue+0x148/0x1ba [ 2612.476695] [<ffffffffa034e3da>] btrfs_put_super+0x19/0x1b [btrfs] [ 2612.477911] [<ffffffff81153e53>] generic_shutdown_super+0x73/0xef [ 2612.479106] [<ffffffff811540e2>] kill_anon_super+0x13/0x1e [ 2612.480226] [<ffffffffa034e1e3>] btrfs_kill_super+0x17/0x23 [btrfs] [ 2612.481471] [<ffffffff81154307>] deactivate_locked_super+0x3b/0x50 [ 2612.482686] [<ffffffff811547a7>] deactivate_super+0x3f/0x43 [ 2612.483791] [<ffffffff8116b3ed>] cleanup_mnt+0x59/0x78 [ 2612.484842] [<ffffffff8116b44c>] __cleanup_mnt+0x12/0x14 [ 2612.485900] [<ffffffff8105d019>] task_work_run+0x8f/0xbc [ 2612.486960] [<ffffffff810028d8>] do_notify_resume+0x5a/0x6b [ 2612.488083] [<ffffffff81236e5b>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 2612.489333] [<ffffffff8142a17f>] int_signal+0x12/0x17 [ 2612.490353] ---[ end trace 54a960a6bdcb8d93 ]--- [ 2612.557253] VFS: Busy inodes after unmount of sdb. Self-destruct in 5 seconds. Have a nice day... Kmemleak confirmed the ordered extent leak (and btrfs inode specific structures such as delayed nodes): $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff880154290db0 (size 576): comm "btrfsck", pid 21980, jiffies 4295542503 (age 1273.412s) hex dump (first 32 bytes): 01 40 00 00 01 00 00 00 b0 1d f1 4e 01 88 ff ff .@.........N.... 00 00 00 00 00 00 00 00 c8 0d 29 54 01 88 ff ff ..........)T.... backtrace: [<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a [<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83 [<ffffffff8122fb26>] __radix_tree_create+0x109/0x190 [<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac [<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs] [<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs] [<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs] [<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs] [<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs] [<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed [<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa [<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff88014ef11db0 (size 576): comm "rm", pid 22009, jiffies 4295542593 (age 1273.052s) hex dump (first 32 bytes): 02 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 c8 1d f1 4e 01 88 ff ff ...........N.... backtrace: [<ffffffff8141d74d>] kmemleak_update_trace+0x4c/0x6a [<ffffffff8122f2c0>] radix_tree_node_alloc+0x6d/0x83 [<ffffffff8122fb26>] __radix_tree_create+0x109/0x190 [<ffffffff8122fbdd>] radix_tree_insert+0x30/0xac [<ffffffffa03b9bde>] btrfs_get_or_create_delayed_node+0x130/0x187 [btrfs] [<ffffffffa03bb82d>] btrfs_delayed_delete_inode_ref+0x32/0xac [btrfs] [<ffffffffa0379dae>] __btrfs_unlink_inode+0xee/0x288 [btrfs] [<ffffffffa037c715>] btrfs_unlink_inode+0x1e/0x40 [btrfs] [<ffffffffa037c797>] btrfs_unlink+0x60/0x9b [btrfs] [<ffffffff8115d7f0>] vfs_unlink+0x9c/0xed [<ffffffff8115f5de>] do_unlinkat+0x12c/0x1fa [<ffffffff811601a7>] SyS_unlinkat+0x29/0x2b [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 [<ffffffffffffffff>] 0xffffffffffffffff unreferenced object 0xffff8800336feda8 (size 584): comm "aio-stress", pid 22031, jiffies 4295543006 (age 1271.400s) hex dump (first 32 bytes): 00 40 3e 00 00 00 00 00 00 00 8f 42 00 00 00 00 .@>........B.... 00 00 01 00 00 00 00 00 00 00 01 00 00 00 00 00 ................ backtrace: [<ffffffff8114eb34>] create_object+0x172/0x29a [<ffffffff8141d790>] kmemleak_alloc+0x25/0x41 [<ffffffff81141ae6>] kmemleak_alloc_recursive.constprop.52+0x16/0x18 [<ffffffff81145288>] kmem_cache_alloc+0xf7/0x198 [<ffffffffa0389243>] __btrfs_add_ordered_extent+0x43/0x309 [btrfs] [<ffffffffa038968b>] btrfs_add_ordered_extent_dio+0x12/0x14 [btrfs] [<ffffffffa03810e2>] btrfs_get_blocks_direct+0x3ef/0x571 [btrfs] [<ffffffff81181349>] do_blockdev_direct_IO+0x62a/0xb47 [<ffffffff8118189a>] __blockdev_direct_IO+0x34/0x36 [<ffffffffa03776e5>] btrfs_direct_IO+0x16a/0x1e8 [btrfs] [<ffffffff81100373>] generic_file_direct_write+0xb8/0x12d [<ffffffffa038615c>] btrfs_file_write_iter+0x24b/0x42f [btrfs] [<ffffffff8118bb0d>] aio_run_iocb+0x2b7/0x32e [<ffffffff8118c99a>] do_io_submit+0x26e/0x2ff [<ffffffff8118ca3b>] SyS_io_submit+0x10/0x12 [<ffffffff81429e92>] system_call_fastpath+0x12/0x17 Signed-off-by:
-
Alexander Usyskin authored
commit 6c15a851 upstream. Set the internal device state to to disabled after hardware reset in stop flow. This will cover cases when driver was not brought to disabled state because of an error and in stop flow we wish not to retry the reset. Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Jonathan Cameron authored
commit e765537a upstream. This reverts commit e0922e5e. Requested by Andrey Smirnov. It incorrectly assumes that the level of indirection is not needed which is not true(probably because the driver incorrectly allocates sizeof(*client) instead of sizeof(*data) via devm_iio_device_alloc). If you look at the code of the probe function(see below) it is easy to see that what is being stored in the private memory of the IIO device instance is not a copy of a 'struct i2c_client' but a pointer to an instance passed as an argument to the probe function. struct i2c_client **data; int ret; < Some code skipped > indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*client)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); *data = client; Without reverting this change any read of a raw value of this sensor leads to a kernel oops due to a NULL pointer de-reference on my hardware setup. Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Andrey Smirnov authored
commit e01becba upstream. Since only a pointer to struct i2c_client is stored in a private area of IIO device created by the driver there's no need to allocate sizeof(struct i2c_client) worth of storage. Pushed to stable as this is linked to the revert patch previously. Without this followup the original patch looks sensible. Signed-off-by:
Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by:
-
Angelo Compagnucci authored
commit 9e128ced upstream. This patch fixes uncorrect order of mcp3422_scales table, the values was erroneously transposed. It removes also an unused array and a wrong comment. Signed-off-by:
Angelo Compagnucci <angelo.compagnucci@gmail.com> Signed-off-by:
-
Urs Fässler authored
commit da019f59 upstream. When not using the "_optional" function, a dummy regulator is returned and the driver fails to initialize. Signed-off-by:
Urs Fässler <urs.fassler@bytesatwork.ch> Acked-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Kristina Martšenko authored
commit 89bb35e2 upstream. Using the touchscreen while running buffered capture results in the buffer reporting lots of wrong values, often just zeros. This is because we push readings to the buffer every time a touchscreen interrupt arrives, including when the buffer's own conversions have not yet finished. So let's only push to the buffer when its conversions are ready. Signed-off-by:
Kristina Martšenko <kristina.martsenko@gmail.com> Reviewed-by:
Marek Vasut <marex@denx.de> Signed-off-by:
-
Kristina Martšenko authored
commit 6abe0300 upstream. Reading a channel through sysfs, or starting a buffered capture, can occasionally turn off the touchscreen. This is because the read_raw() and buffer preenable()/postdisable() callbacks unschedule current conversions on all channels. If a delay channel happens to schedule a touchscreen conversion at the same time, the conversion gets cancelled and the touchscreen sequence stops. This is probably related to this note from the reference manual: "If a delay group schedules channels to be sampled and a manual write to the schedule field in CTRL0 occurs while the block is discarding samples, the LRADC will switch to the new schedule and will not sample the channels that were previously scheduled. The time window for this to happen is very small and lasts only while the LRADC is discarding samples." So make the callbacks only unschedule conversions for the channels they use. This means channel 0 for read_raw() and channels 0-5 for the buffer (if the touchscreen is enabled). Since the touchscreen uses different channels (6 and 7), it no longer gets turned off. This is tested and fixes the issue on i.MX28, but hasn't been tested on i.MX23. Signed-off-by:
-
Kristina Martšenko authored
commit 86bf7f3e upstream. Reading a channel through sysfs, or starting a buffered capture, will currently turn off the touchscreen. This is because the read_raw() and buffer preenable()/postdisable() callbacks disable interrupts for all LRADC channels, including those the touchscreen uses. So make the callbacks only disable interrupts for the channels they use. This means channel 0 for read_raw() and channels 0-5 for the buffer (if the touchscreen is enabled). Since the touchscreen uses different channels (6 and 7), it no longer gets turned off. Note that only i.MX28 is affected by this issue, i.MX23 should be fine. Signed-off-by:
-
Kristina Martšenko authored
commit f81197b8 upstream. The touchscreen was initially designed [1] to map all of its physical channels to one virtual channel, leaving buffered capture to use the remaining 7 virtual channels. When the touchscreen was reimplemented [2], it was made to use four virtual channels, which overlap and conflict with the channels the buffer uses. As a result, when the buffer is enabled, the touchscreen's virtual channels are remapped to whichever physical channels the buffer was configured with, causing the touchscreen to read those instead of the touch measurement channels. Effectively the touchscreen stops working. So here we separate the channels again, giving the touchscreen 2 virtual channels and the buffer 6. We can't give the touchscreen just 1 channel as before, as the current pressure calculation requires 2 channels to be read at the same time. This makes the touchscreen continue to work during buffered capture. It has been tested on i.MX28, but not on i.MX23. [1] 06ddd353 ("iio: mxs: Implement support for touchscreen") [2] dee05308 ("Staging/iio/adc/touchscreen/MXS: add interrupt driven touch detection") Signed-off-by:
-
Rasmus Villemoes authored
commit 19e353f2 upstream. The intention is obviously to sign-extend a 12 bit quantity. But because of C's promotion rules, the assignment is equivalent to "val16 &= 0xfff;". Use the proper API for this. Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by:
-
Stefan Wahren authored
commit 03305e53 upstream. Since commit c8231a9a ("iio: mxs-lradc: compute temperature from channel 8 and 9") with the removal of adc channel 9 there is no 1-1 mapping in the channel spec. All hwmon channel values above 9 are accessible via there index minus one. So add a hidden iio channel 9 to fix this issue. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Acked-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Reviewed-by:
-
Quentin Casasnovas authored
commit 06c8173e upstream. Commit: f31a9f7c ("x86/xsaves: Use xsaves/xrstors to save and restore xsave area") introduced alternative instructions for XSAVES/XRSTORS and commit: adb9d526 ("x86/xsaves: Add xsaves and xrstors support for booting time") added support for the XSAVES/XRSTORS instructions at boot time. Unfortunately both failed to properly protect them against faulting: The 'xstate_fault' macro will use the closest label named '1' backward and that ends up in the .altinstr_replacement section rather than in .text. This means that the kernel will never find in the __ex_table the .text address where this instruction might fault, leading to serious problems if userspace manages to trigger the fault. Signed-off-by:
Jamie Iles <jamie.iles@oracle.com> [ Improved the changelog, fixed some whitespace noise. ] Acked-by:
Borislav Petkov <bp@alien8.de> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Allan Xavier <mr.a.xavier@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: adb9d526 ("x86/xsaves: Add xsaves and xrstors support for booting time") Fixes: f31a9f7c ("x86/xsaves: Use xsaves/xrstors to save and restore xsave area") Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Andy Lutomirski authored
commit 956421fb upstream. 'ret_from_fork' checks TIF_IA32 to determine whether 'pt_regs' and the related state make sense for 'ret_from_sys_call'. This is entirely the wrong check. TS_COMPAT would make a little more sense, but there's really no point in keeping this optimization at all. This fixes a return to the wrong user CS if we came from int 0x80 in a 64-bit task. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/4710be56d76ef994ddf59087aad98c000fbab9a4.1424989793.git.luto@amacapital.net [ Backported from tip:x86/asm. ] Signed-off-by:
-
Nicholas Bellinger authored
commit aa179935 upstream. This patch adds a check to sbc_parse_cdb() in order to detect when an LBA + sector vs. end-of-device calculation wraps when the LBA is sufficently large enough (eg: 0xFFFFFFFFFFFFFFFF). Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 8e575c50 upstream. This patch adds a check to sbc_setup_write_same() to verify the incoming WRITE_SAME LBA + number of blocks does not exceed past the end-of-device. Also check for potential LBA wrap-around as well. Reported-by:
Bart Van Assche <bart.vanassche@sandisk.com> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Nicholas Bellinger authored
commit f161d4b4 upstream. This patch addresses the original PR_APTPL_BUF_LEN = 8k limitiation for write-out of PR APTPL metadata that Martin has recently been running into. It changes core_scsi3_update_and_write_aptpl() to use vzalloc'ed memory instead of kzalloc, and increases the default hardcoded length to 256k. It also adds logic in core_scsi3_update_and_write_aptpl() to double the original length upon core_scsi3_update_aptpl_buf() failure, and retries until the vzalloc'ed buffer is large enough to accommodate the outgoing APTPL metadata. Reported-by:
Martin Svec <martin.svec@zoner.cz> Signed-off-by:
-
Tom O'Rourke authored
commit 46efa4ab upstream. The efficient frequency (RPe) should stay in the range RPn <= RPe <= RP0. The pcode clamps the returned value internally on Broadwell but not on Haswell. Fix for missing range check in commit 93ee2920 Author: Tom O'Rourke <Tom.O'Rourke@intel.com> Date: Wed Nov 19 14:21:52 2014 -0800 drm/i915: Use efficient frequency for HSW/BDW Reference: http://lists.freedesktop.org/archives/intel-gfx/2015-February/059802.htmlReported-by:
Michael Auchter <a@phire.org> Suggested-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Tom O'Rourke <Tom.O'Rourke@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Shobhit Kumar authored
commit d180d2bb upstream. As per the specififcation, the SB_DevFn is the PCI_DEVFN of the target device and not the source. So PCI_DEVFN(2,0) is not correct. Further the port ID should be enough to identify devices unless they are MFD. The SB_DevFn was intended to remove ambiguity in case of these MFD devices. For non MFD devices the recommendation for the target device IP was to ignore these fields, but not all of them followed the recommendation. Some like CCK ignore these fields and hence PCI_DEVFN(2, 0) works and so does PCI_DEVFN(0, 0) as it works for DPIO. The issue came to light because of GPIONC which was not getting programmed correctly with PCI_DEVFN(2, 0). It turned out that this did not follow the recommendation and expected 0 in this field. In general the recommendation is to use SB_DevFn as PCI_DEVFN(0, 0) for all devices except target PCI devices. Signed-off-by:
Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Michał Winiarski authored
commit 460822b0 upstream. It's possible for invalidate_range_start mmu notifier callback to race against userptr object release. If the gem object was released prior to obtaining the spinlock in invalidate_range_start we're hitting null pointer dereference. Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close Testcase: igt/gem_userptr_blits/stress-mm-invalidate-close-overlap Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Michał Winiarski <michal.winiarski@intel.com> Reviewed-by:
-
Daniel Vetter authored
commit 0ca09685 upstream. Nothing in Bspec seems to indicate that we actually needs this, and it looks like can't work since by this point the pipe is off and so vblanks won't really happen any more. Note that Bspec mentions that it takes a vblank for this bit to change, but _only_ when enabling. Dropping this code quenches an annoying backtrace introduced by the more anal checking since commit 51e31d49 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Sep 15 12:36:02 2014 +0200 drm/i915: Use generic vblank wait Note: This fixes the fallout from the above commit, but does not address the shortcomings of the IBX transcoder select workaround implementation discussed during review [1]. [1] http://mid.gmane.org/87y4o7usxf.fsf@intel.com Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=86095Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by:
-
Chris Wilson authored
commit f0a1fb10 upstream. This looked like an odd regression from commit ec5cc0f9 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Thu Jun 12 10:28:55 2014 +0100 drm/i915: Restrict GPU boost to the RCS engine but in reality it undercovered a much older coherency bug. The issue that boosting the GPU frequency on the BCS ring was masking was that we could wake the CPU up after completion of a BCS batch and inspect memory prior to the write cache being fully evicted. In order to serialise the breadcrumb interrupt (and so ensure that the CPU's view of memory is coherent) we need to perform a post-sync operation in the MI_FLUSH_DW. v2: Fix all the MI_FLUSH_DW (bsd plus the duplication in execlists). Also fix the invalidate_domains mask in gen8_emit_flush() for ring != VCS. Testcase: gpuX-rcs-gpu-read-after-write Signed-off-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Alex Deucher authored
commit 09b6e85f upstream. Missing parameter when fetching the real voltage values from atom. Fixes problems with dynamic clocking on certain boards. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87457Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 66c2b84b upstream. Don't restrict it to just eDP panels. Some LVDS bridge chips require this. Fixes blank panels on resume on certain laptops. Noticed by mrnuke on IRC. bug: https://bugs.freedesktop.org/show_bug.cgi?id=42960Signed-off-by:
-
Christian König authored
commit a9c73a0e upstream. Emit the EOP twice to avoid cache flushing problems. Signed-off-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 410af8d7 upstream. Enable at init and disable on fini. Workaround for hardware problems. v2 (chk): extend commit message v3: add new function Signed-off-by:
-
Michel Dänzer authored
commit a53fa438 upstream. Doing so can cause things to become slow. Print a warning at compile time and an informative message at runtime in that case. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=88758Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
-
David Ung authored
commit 31f40f86 upstream. When copying a relocation from userspace, copy the correct target offset. Signed-off-by:
David Ung <davidu@nvidia.com> Fixes: 961e3bea ("drm/tegra: Make job submission 64-bit safe") [treding@nvidia.com: provide a better commit message] Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Johannes Weiner authored
commit cc873177 upstream. Historically, !__GFP_FS allocations were not allowed to invoke the OOM killer once reclaim had failed, but nevertheless kept looping in the allocator. Commit 9879de73 ("mm: page_alloc: embed OOM killing naturally into allocation slowpath"), which should have been a simple cleanup patch, accidentally changed the behavior to aborting the allocation at that point. This creates problems with filesystem callers (?) that currently rely on the allocator waiting for other tasks to intervene. Revert the behavior as it shouldn't have been changed as part of a cleanup patch. Fixes: 9879de73 ("mm: page_alloc: embed OOM killing naturally into allocation slowpath") Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Reported-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Dave Chinner <david@fromorbit.com> Acked-by:
David Rientjes <rientjes@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Joonsoo Kim authored
commit da616534 upstream. Maxime reported the following memory leak regression due to commit dbc8358c ("mm/nommu: use alloc_pages_exact() rather than its own implementation"). On v3.19, I am facing a memory leak. Each time I run a command one page is lost. Here an example with busybox's free command: / # free total used free shared buffers cached Mem: 7928 1972 5956 0 0 492 -/+ buffers/cache: 1480 6448 / # free total used free shared buffers cached Mem: 7928 1976 5952 0 0 492 -/+ buffers/cache: 1484 6444 / # free total used free shared buffers cached Mem: 7928 1980 5948 0 0 492 -/+ buffers/cache: 1488 6440 / # free total used free shared buffers cached Mem: 7928 1984 5944 0 0 492 -/+ buffers/cache: 1492 6436 / # free total used free shared buffers cached Mem: 7928 1988 5940 0 0 492 -/+ buffers/cache: 1496 6432 At some point, the system fails to sastisfy 256KB allocations: free: page allocation failure: order:6, mode:0xd0 CPU: 0 PID: 67 Comm: free Not tainted 3.19.0-05389-gacf2cf1-dirty #64 Hardware name: STM32 (Device Tree Support) show_stack+0xb/0xc warn_alloc_failed+0x97/0xbc __alloc_pages_nodemask+0x295/0x35c __get_free_pages+0xb/0x24 alloc_pages_exact+0x19/0x24 do_mmap_pgoff+0x423/0x658 vm_mmap_pgoff+0x3f/0x4e load_flat_file+0x20d/0x4f8 load_flat_binary+0x3f/0x26c search_binary_handler+0x51/0xe4 do_execveat_common+0x271/0x35c do_execve+0x19/0x1c ret_fast_syscall+0x1/0x4a Mem-info: Normal per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:123 dirty:0 writeback:0 unstable:0 free:1515 slab_reclaimable:17 slab_unreclaimable:139 mapped:0 shmem:0 pagetables:0 bounce:0 free_cma:0 Normal free:6060kB min:352kB low:440kB high:528kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:492kB isolated(anon):0ks lowmem_reserve[]: 0 0 Normal: 23*4kB (U) 22*8kB (U) 24*16kB (U) 23*32kB (U) 23*64kB (U) 23*128kB (U) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 6060kB 123 total pagecache pages 2048 pages of RAM 1538 free pages 66 reserved pages 109 slab pages -46 pages shared 0 pages swap cached nommu: Allocation of length 221184 from process 67 (free) failed Normal per-cpu: CPU 0: hi: 0, btch: 1 usd: 0 active_anon:0 inactive_anon:0 isolated_anon:0 active_file:0 inactive_file:0 isolated_file:0 unevictable:123 dirty:0 writeback:0 unstable:0 free:1515 slab_reclaimable:17 slab_unreclaimable:139 mapped:0 shmem:0 pagetables:0 bounce:0 free_cma:0 Normal free:6060kB min:352kB low:440kB high:528kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:0kB unevictable:492kB isolated(anon):0ks lowmem_reserve[]: 0 0 Normal: 23*4kB (U) 22*8kB (U) 24*16kB (U) 23*32kB (U) 23*64kB (U) 23*128kB (U) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 6060kB 123 total pagecache pages Unable to allocate RAM for process text/data, errno 12 SEGV This problem happens because we allocate ordered page through __get_free_pages() in do_mmap_private() in some cases and we try to free individual pages rather than ordered page in free_page_series(). In this case, freeing pages whose refcount is not 0 won't be freed to the page allocator so memory leak happens. To fix the problem, this patch changes __get_free_pages() to alloc_pages_exact() since alloc_pages_exact() returns physically-contiguous pages but each pages are refcounted. Fixes: dbc8358c ("mm/nommu: use alloc_pages_exact() rather than its own implementation"). Reported-by:
Maxime Coquelin <mcoquelin.stm32@gmail.com> Tested-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Hugh Dickins authored
commit ff59909a upstream. The vmstat interfaces are good at hiding negative counts (at least when CONFIG_SMP); but if you peer behind the curtain, you find that nr_isolated_anon and nr_isolated_file soon go negative, and grow ever more negative: so they can absorb larger and larger numbers of isolated pages, yet still appear to be zero. I'm happy to avoid a congestion_wait() when too_many_isolated() myself; but I guess it's there for a good reason, in which case we ought to get too_many_isolated() working again. The imbalance comes from isolate_migratepages()'s ISOLATE_ABORT case: putback_movable_pages() decrements the NR_ISOLATED counts, but we forgot to call acct_isolated() to increment them. It is possible that the bug whcih this patch fixes could cause OOM kills when the system still has a lot of reclaimable page cache. Fixes: edc2ca61 ("mm, compaction: move pageblock checks up from isolate_migratepages_range()") Signed-off-by:
Hugh Dickins <hughd@google.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Acked-by:
-
