- 14 Jan, 2021 2 commits
-
-
Marco Chiappero authored
Use CRYPTO_LIB_AES in place of CRYPTO_AES in the dependences for the QAT common code. Fixes: c0e583ab ("crypto: qat - add CRYPTO_AES to Kconfig dependencies") Reported-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Marco Chiappero <marco.chiappero@intel.com> Acked-by:
Giovanni Cabiddu <giovanni.cabiddu@intel.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au>
-
Herbert Xu authored
This patch changes the cast in stm32_cryp_check_ctr_counter from u32 to __be32 to match the prototype of stm32_cryp_hw_write_iv correctly. Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
- 08 Jan, 2021 3 commits
-
-
Herbert Xu authored
This patch moves the extern algorithm declarations into a header file so that a number of compiler warnings are silenced. Signed-off-by: -
Ard Biesheuvel authored
The AES-NI driver implements XTS via the glue helper, which consumes a struct with sets of function pointers which are invoked on chunks of input data of the appropriate size, as annotated in the struct. Let's get rid of this indirection, so that we can perform direct calls to the assembler helpers. Instead, let's adopt the arm64 strategy, i.e., provide a helper which can consume inputs of any size, provided that the penultimate, full block is passed via the last call if ciphertext stealing needs to be applied. This also allows us to enable the XTS mode for i386. Tested-by: Eric Biggers <ebiggers@google.com> # x86_64 Signed-off-by:
-
Ard Biesheuvel authored
The XTS asm helper arrangement is a bit odd: the 8-way stride helper consists of back-to-back calls to the 4-way core transforms, which are called indirectly, based on a boolean that indicates whether we are performing encryption or decryption. Given how costly indirect calls are on x86, let's switch to direct calls, and given how the 8-way stride doesn't really add anything substantial, use a 4-way stride instead, and make the asm core routine deal with any multiple of 4 blocks. Since 512 byte sectors or 4 KB blocks are the typical quantities XTS operates on, increase the stride exported to the glue helper to 512 bytes as well. As a result, the number of indirect calls is reduced from 3 per 64 bytes of in/output to 1 per 512 bytes of in/output, which produces a 65% speedup when operating on 1 KB blocks (measured on a Intel(R) Core(TM) i7-8650U CPU) Fixes: 9697fa39 ("x86/retpoline/crypto: Convert crypto assembler indirect jumps") Tested-by: Eric Biggers <ebiggers@google.com> # x86_64 Signed-off-by:
-
- 02 Jan, 2021 35 commits
-
-
Rob Herring authored
PicoXcell has had nothing but treewide cleanups for at least the last 8 years and no signs of activity. The most recent activity is a yocto vendor kernel based on v3.0 in 2015. Cc: Jamie Iles <jamie@jamieiles.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-crypto@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Eric Biggers authored
Add a NEON-accelerated implementation of BLAKE2b. On Cortex-A7 (which these days is the most common ARM processor that doesn't have the ARMv8 Crypto Extensions), this is over twice as fast as SHA-256, and slightly faster than SHA-1. It is also almost three times as fast as the generic implementation of BLAKE2b: Algorithm Cycles per byte (on 4096-byte messages) =================== ======================================= blake2b-256-neon 14.0 sha1-neon 16.3 blake2s-256-arm 18.8 sha1-asm 20.8 blake2s-256-generic 26.0 sha256-neon 28.9 sha256-asm 32.0 blake2b-256-generic 38.9 This implementation isn't directly based on any other implementation, but it borrows some ideas from previous NEON code I've written as well as from chacha-neon-core.S. At least on Cortex-A7, it is faster than the other NEON implementations of BLAKE2b I'm aware of (the implementation in the BLAKE2 official repository using intrinsics, and Andrew Moon's implementation which can be found in SUPERCOP). It does only one block at a time, so it performs well on short messages too. NEON-accelerated BLAKE2b is useful because there is interest in using BLAKE2b-256 for dm-verity on low-end Android devices (specifically, devices that lack the ARMv8 Crypto Extensions) to replace SHA-1. On these devices, the performance cost of upgrading to SHA-256 may be unacceptable, whereas BLAKE2b-256 would actually improve performance. Although BLAKE2b is intended for 64-bit platforms (unlike BLAKE2s which is intended for 32-bit platforms), on 32-bit ARM processors with NEON, BLAKE2b is actually faster than BLAKE2s. This is because NEON supports 64-bit operations, and because BLAKE2s's block size is too small for NEON to be helpful for it. The best I've been able to do with BLAKE2s on Cortex-A7 is 18.8 cpb with an optimized scalar implementation. (I didn't try BLAKE2sp and BLAKE3, which in theory would be faster, but they're more complex as they require running multiple hashes at once. Note that BLAKE2b already uses all the NEON bandwidth on the Cortex-A7, so I expect that any speedup from BLAKE2sp or BLAKE3 would come only from the smaller number of rounds, not from the extra parallelism.) For now this BLAKE2b implementation is only wired up to the shash API, since there is no library API for BLAKE2b yet. However, I've tried to keep things consistent with BLAKE2s, e.g. by defining blake2b_compress_arch() which is analogous to blake2s_compress_arch() and could be exported for use by the library API later if needed. Acked-by:
Eric Biggers <ebiggers@google.com> Tested-by:
-
Eric Biggers authored
The file comment for blake2b_generic.c makes it sound like it's the reference implementation of BLAKE2b with only minor changes. But it's actually been changed a lot. Update the comment to make this clearer. Reviewed-by:
David Sterba <dsterba@suse.com> Acked-by:
-
Eric Biggers authored
Sync the BLAKE2b code with the BLAKE2s code as much as possible: - Move a lot of code into new headers <crypto/blake2b.h> and <crypto/internal/blake2b.h>, and adjust it to be like the corresponding BLAKE2s code, i.e. like <crypto/blake2s.h> and <crypto/internal/blake2s.h>. - Rename constants, e.g. BLAKE2B_*_DIGEST_SIZE => BLAKE2B_*_HASH_SIZE. - Use a macro BLAKE2B_ALG() to define the shash_alg structs. - Export blake2b_compress_generic() for use as a fallback. This makes it much easier to add optimized implementations of BLAKE2b, as optimized implementations can use the helper functions crypto_blake2b_{setkey,init,update,final}() and blake2b_compress_generic(). The ARM implementation will use these. But this change is also helpful because it eliminates unnecessary differences between the BLAKE2b and BLAKE2s code, so that the same improvements can easily be made to both. (The two algorithms are basically identical, except for the word size and constants.) It also makes it straightforward to add a library API for BLAKE2b in the future if/when it's needed. This change does make the BLAKE2b code slightly more complicated than it needs to be, as it doesn't actually provide a library API yet. For example, __blake2b_update() doesn't really need to exist yet; it could just be inlined into crypto_blake2b_update(). But I believe this is outweighed by the benefits of keeping the code in sync. Signed-off-by: -
Eric Biggers authored
When available, select the new implementation of BLAKE2s for 32-bit ARM. This is faster than the generic C implementation. Reviewed-by:
Jason A. Donenfeld <Jason@zx2c4.com> Acked-by:
-
Eric Biggers authored
Add an ARM scalar optimized implementation of BLAKE2s. NEON isn't very useful for BLAKE2s because the BLAKE2s block size is too small for NEON to help. Each NEON instruction would depend on the previous one, resulting in poor performance. With scalar instructions, on the other hand, we can take advantage of ARM's "free" rotations (like I did in chacha-scalar-core.S) to get an implementation get runs much faster than the C implementation. Performance results on Cortex-A7 in cycles per byte using the shash API: 4096-byte messages: blake2s-256-arm: 18.8 blake2s-256-generic: 26.0 500-byte messages: blake2s-256-arm: 20.3 blake2s-256-generic: 27.9 100-byte messages: blake2s-256-arm: 29.7 blake2s-256-generic: 39.2 32-byte messages: blake2s-256-arm: 50.6 blake2s-256-generic: 66.2 Except on very short messages, this is still slower than the NEON implementation of BLAKE2b which I've written; that is 14.0, 16.4, 25.8, and 76.1 cpb on 4096, 500, 100, and 32-byte messages, respectively. However, optimized BLAKE2s is useful for cases where BLAKE2s is used instead of BLAKE2b, such as WireGuard. This new implementation is added in the form of a new module blake2s-arm.ko, which is analogous to blake2s-x86_64.ko in that it provides blake2s_compress_arch() for use by the library API as well as optionally register the algorithms with the shash API. Acked-by:
-
Eric Biggers authored
Address the following checkpatch warning: WARNING: Use #include <linux/bug.h> instead of <asm/bug.h> Signed-off-by:
-
Eric Biggers authored
Use the full path in the include guards for the BLAKE2s headers to avoid ambiguity and to match the convention for most files in include/crypto/. Signed-off-by:
-
Eric Biggers authored
The first three fields of 'struct blake2s_state' are used in assembly code, which isn't immediately obvious, so add a comment to this effect. Signed-off-by:
-
Eric Biggers authored
If no key was provided, then don't waste time initializing the block buffer, as its initial contents won't be used. Also, make crypto_blake2s_init() and blake2s() call a single internal function __blake2s_init() which treats the key as optional, rather than conditionally calling blake2s_init() or blake2s_init_key(). This reduces the compiled code size, as previously both blake2s_init() and blake2s_init_key() were being inlined into these two callers, except when the key size passed to blake2s() was a compile-time constant. These optimizations aren't that significant for BLAKE2s. However, the equivalent optimizations will be more significant for BLAKE2b, as everything is twice as big in BLAKE2b. And it's good to keep things consistent rather than making optimizations for BLAKE2b but not BLAKE2s. Signed-off-by:
-
Eric Biggers authored
Add helper functions for shash implementations of BLAKE2s to include/crypto/internal/blake2s.h, taking advantage of __blake2s_update() and __blake2s_final() that were added by the previous patch to share more code between the library and shash implementations. crypto_blake2s_setkey() and crypto_blake2s_init() are usable as shash_alg::setkey and shash_alg::init directly, while crypto_blake2s_update() and crypto_blake2s_final() take an extra 'blake2s_compress_t' function pointer parameter. This allows the implementation of the compression function to be overridden, which is the only part that optimized implementations really care about. The new functions are inline functions (similar to those in sha1_base.h, sha256_base.h, and sm3_base.h) because this avoids needing to add a new module blake2s_helpers.ko, they aren't *too* long, and this avoids indirect calls which are expensive these days. Note that they can't go in blake2s_generic.ko, as that would require selecting CRYPTO_BLAKE2S from CRYPTO_BLAKE2S_X86, which would cause a recursive dependency. Finally, use these new helper functions in the x86 implementation of BLAKE2s. (This part should be a separate patch, but unfortunately the x86 implementation used the exact same function names like "crypto_blake2s_update()", so it had to be updated at the same time.) Signed-off-by:
-
Eric Biggers authored
Move most of blake2s_update() and blake2s_final() into new inline functions __blake2s_update() and __blake2s_final() in include/crypto/internal/blake2s.h so that this logic can be shared by the shash helper functions. This will avoid duplicating this logic between the library and shash implementations. Signed-off-by:
-
Eric Biggers authored
It doesn't make sense for the generic implementation of BLAKE2s to include <crypto/internal/simd.h> and <linux/jump_label.h>, as these are things that would only be useful in an architecture-specific implementation. Remove these unnecessary includes. Acked-by:
-
Eric Biggers authored
The shash_alg structs for the four variants of BLAKE2s are identical except for the algorithm name, driver name, and digest size. So, avoid code duplication by using a macro to define these structs. Acked-by:
-
Eric Biggers authored
The shash_alg structs for the four variants of BLAKE2s are identical except for the algorithm name, driver name, and digest size. So, avoid code duplication by using a macro to define these structs. Acked-by:
-
Christophe JAILLET authored
In case of error, we should call 'clk_disable_unprepare()' to undo a previous 'clk_prepare_enable()' call, as already done in the remove function. Fixes: 406346d2 ("hwrng: ingenic - Add hardware TRNG for Ingenic X1830") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Tested-by:
周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com> Signed-off-by:
-
Matthias Brugger authored
We are calling the same code for enable and disable the block in various parts of the driver. Put that code into a new function to reduce code duplication. Signed-off-by:
Matthias Brugger <mbrugger@suse.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Acked-by:
Scott Branden <scott.branden@broadcom.com> Signed-off-by:
-
Matthias Brugger authored
When trying to disable the block we bitwise or the control register with value zero. This is confusing as using bitwise or with value zero doesn't have any effect at all. Drop this as we already set the enable bit to zero by appling inverted RNG_RBGEN_MASK. Signed-off-by:
-
Ard Biesheuvel authored
Counter mode is a stream cipher chaining mode that is typically used with inputs that are of arbitrarily length, and so a tail block which is smaller than a full AES block is rule rather than exception. The current ctr(aes) implementation for arm64 always makes a separate call into the assembler routine to process this tail block, which is suboptimal, given that it requires reloading of the AES round keys, and prevents us from handling this tail block using the 5-way stride that we use for better performance on deep pipelines. So let's update the assembler routine so it can handle any input size, and uses NEON permutation instructions and overlapping loads and stores to handle the tail block. This results in a ~16% speedup for 1420 byte blocks on cores with deep pipelines such as ThunderX2. Signed-off-by:
-
Ard Biesheuvel authored
Commit 69b6f2e8 ("crypto: arm64/aes-neon - limit exposed routines if faster driver is enabled") intended to hide modes from the plain NEON driver that are also implemented by the faster bit sliced NEON one if both are enabled. However, the defined() CPP function does not detect if the bit sliced NEON driver is enabled as a module. So instead, let's use IS_ENABLED() here. Fixes: 69b6f2e8 ("crypto: arm64/aes-neon - limit exposed routines if ...") Signed-off-by:
-
Daniele Alessandrelli authored
Add maintainers for the Intel Keem Bay Offload Crypto Subsystem (OCS) Hash Control Unit (HCU) crypto driver. Signed-off-by:
Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by:
Declan Murphy <declan.murphy@intel.com> Signed-off-by:
-
Daniele Alessandrelli authored
Add optional support of sha224 and hmac(sha224). Co-developed-by:
-
Daniele Alessandrelli authored
Add HMAC support to the Keem Bay OCS HCU driver, thus making it provide the following additional transformations: - hmac(sha256) - hmac(sha384) - hmac(sha512) - hmac(sm3) The Keem Bay OCS HCU hardware does not allow "context-switch" for HMAC operations, i.e., it does not support computing a partial HMAC, save its state and then continue it later. Therefore, full hardware acceleration is provided only when possible (e.g., when crypto_ahash_digest() is called); in all other cases hardware acceleration is only partial (OPAD and IPAD calculation is done in software, while hashing is hardware accelerated). Co-developed-by:
-
Declan Murphy authored
Add support for the Hashing Control Unit (HCU) included in the Offload Crypto Subsystem (OCS) of the Intel Keem Bay SoC, thus enabling hardware-accelerated hashing on the Keem Bay SoC for the following algorithms: - sha256 - sha384 - sha512 - sm3 The driver is composed of two files: - 'ocs-hcu.c' which interacts with the hardware and abstracts it by providing an API following the usual paradigm used in hashing drivers / libraries (e.g., hash_init(), hash_update(), hash_final(), etc.). NOTE: this API can block and sleep, since completions are used to wait for the HW to complete the hashing. - 'keembay-ocs-hcu-core.c' which exports the functionality provided by 'ocs-hcu.c' as a ahash crypto driver. The crypto engine is used to provide asynchronous behavior. 'keembay-ocs-hcu-core.c' also takes care of the DMA mapping of the input sg list. The driver passes crypto manager self-tests, including the extra tests (CRYPTO_MANAGER_EXTRA_TESTS=y). Signed-off-by:
Mark Gross <mgross@linux.intel.com> Signed-off-by:
-
Declan Murphy authored
Add device-tree bindings for the Intel Keem Bay Offload Crypto Subsystem (OCS) Hashing Control Unit (HCU) crypto driver. Signed-off-by:
-
Corentin Labbe authored
This patchs fixes some remaining style issue. Signed-off-by:
Corentin Labbe <clabbe@baylibre.com> Signed-off-by:
-
Corentin Labbe authored
This patch enable to access usage stats for each algorithm. Signed-off-by:
-
Corentin Labbe authored
With the recent kmap change, some tests which were conditional on CONFIG_DEBUG_HIGHMEM now are enabled by default. This permit to detect a problem in sun4i-ss usage of kmap. sun4i-ss uses two kmap via sg_miter (one for input, one for output), but using two kmap at the same time is hard: "the ordering has to be correct and with sg_miter that's probably hard to get right." (quoting Tlgx) So the easiest solution is to never have two sg_miter/kmap open at the same time. After each use of sg_miter, I store the current index, for being able to resume sg_miter to the right place. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Signed-off-by:
-
Corentin Labbe authored
The need_fallback is never initialized and seem to be always true at runtime. So all hardware operations are always bypassed. Fixes: 0ae1f46c ("crypto: sun4i-ss - fallback when length is not multiple of blocksize") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Corentin Labbe authored
Ciphers produce invalid results on BE. Key and IV need to be written in LE. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Corentin Labbe authored
Allwinner A10 and A13 SoC have a version of the SS which produce invalid IV in IVx register. Instead of adding a variant for those, let's convert SS to produce IV directly from data. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Corentin Labbe authored
The optimized cipher function need length multiple of 4 bytes. But it get sometimes odd length. This is due to SG data could be stored with an offset. So the fix is to check also if the offset is aligned with 4 bytes. Fixes: 6298e948 ("crypto: sunxi-ss - Add Allwinner Security System crypto accelerator") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Corentin Labbe authored
When running the non-optimized cipher function, SS produce partial random output. This is due to linearize buffers being reseted after each loop. For preserving stack, instead of moving them back to start of function, I move them in sun4i_ss_ctx. Fixes: 8d3bcb99 ("crypto: sun4i-ss - reduce stack usage") Signed-off-by:
-
Tian Tao authored
Remove dev_err() messages after platform_get_irq*() failures. drivers/crypto/inside-secure/safexcel.c: line 1161 is redundant because platform_get_irq() already prints an error Generated by: scripts/coccinelle/api/platform_get_irq.cocci Signed-off-by:
Tian Tao <tiantao6@hisilicon.com> Acked-by:
Antoine Tenart <atenart@kernel.org> Signed-off-by:
-
Ard Biesheuvel authored
The cipher routines in the crypto API are mostly intended for templates implementing skcipher modes generically in software, and shouldn't be used outside of the crypto subsystem. So move the prototypes and all related definitions to a new header file under include/crypto/internal. Also, let's use the new module namespace feature to move the symbol exports into a new namespace CRYPTO_INTERNAL. Signed-off-by:
-
