With CP115 standalone modules, all MPP configuration are
possible. Handle this new possibility thanks to the new
"marvell,cp115-standalone-pinctrl" compatible property.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
[<miquel.raynal@bootlin.com>: mention the new compatible in the
commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20190805101607.29811-4-miquel.raynal@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add missing definition for function 0xe on CP-110 MPP-62.
The pin function is Data Strobe for SDIO interface.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20190805101607.29811-2-miquel.raynal@bootlin.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

A new compatible is going to be used for Armada CP115 pinctrl block,
document it.
Signed-off-by: Grzegorz Jaszczyk <jaz@semihalf.com>
[<miquel.raynal@bootlin.com>: split the documentation out of the
driver commit]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20190805101607.29811-3-miquel.raynal@bootlin.comReviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion. The BCM2835 has multiple parents so let's
exploit the new facility in the GPIO_IRQCHIP to actually
deal with multiple parents.

Cc: Eric Anholt <eric@anholt.net>
Cc: Thierry Reding <treding@nvidia.com>
[Rebased on changes in the pinctrl tree]
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20190812062729.1892-1-linus.walleij@linaro.org

Merge tag 'sh-pfc-for-v5.4-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel

pinctrl: sh-pfc: Updates for v5.4 (take two)

  - Support switching between function and gpio at runtime,
  - Small fixes and cleanups.

Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190815060718.3286-1-nishkadg.linux@gmail.comReviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The user space like gpioinfo only see the GPIO usage but not the
MUX usage (e.g. I2C or SPI usage) of a pin. As a user we want
to know which pin is free/safe to use. So take the MUX usage of
strict pinmux controllers into account to get a more realistic
view for ioctl GPIO_GET_LINEINFO_IOCTL.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Link: https://lore.kernel.org/r/20190814110035.13451-1-ramon.fried@linux.intel.comAcked-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the PM8150l GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190814123512.6017-3-vkoul@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the PM8150b GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190814123512.6017-2-vkoul@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

Add support for the PM8150 GPIO support to the Qualcomm PMIC GPIO
binding.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20190814123512.6017-1-vkoul@kernel.orgSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

When cold-booting Asus X434DA, GPIO 7 is found to be already configured
as an interrupt, and the GPIO level is found to be in a state that
causes the interrupt to fire.

As soon as pinctrl-amd probes, this interrupt fires and invokes
amd_gpio_irq_handler(). The IRQ is acked, but no GPIO-IRQ handler was
invoked, so the GPIO level being unchanged just causes another interrupt
to fire again immediately after.

This results in an interrupt storm causing this platform to hang
during boot, right after pinctrl-amd is probed.

Detect this situation and disable the GPIO interrupt when this happens.
This enables the affected platform to boot as normal. GPIO 7 actually is
the I2C touchpad interrupt line, and later on, i2c-multitouch loads and
re-enables this interrupt when it is ready to handle it.

Instead of this approach, I considered disabling all GPIO interrupts at
probe time, however that seems a little risky, and I also confirmed that
Windows does not seem to have this behaviour: the same 41 GPIO IRQs are
enabled under both Linux and Windows, which is a far larger collection
than the GPIOs referenced by the DSDT on this platform.
Signed-off-by: Daniel Drake <drake@endlessm.com>
Link: https://lore.kernel.org/r/20190814090540.7152-1-drake@endlessm.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This driver is implementing a GPIO driver so include
<linux/gpio/driver.h> and not the legacy API <linux/gpio.h>.
When testing it turns out it also relies on implicit
inclusion of <linux/io.h> (readw etc) so make sure to
include that as well.

Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

These flags are for consumers of GPIO lines, not for
drivers.

Cc: Chris Brandt <chris.brandt@renesas.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return in
three places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

This is a GPIO driver, use the appropriate header
<linux/gpio/driver.h> rather than the legacy <linux/gpio.h>
header.

Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Some drivers require switching between function and gpio at run-time.
Allow to roll back from gpio to mux when the gpio is freed.
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

Linux 5.3-rc5

Each iteration of for_each_child_of_node puts the previous node, but in
the case of a return from the middle of the loop, there is no put, thus
causing a memory leak. Hence add an of_node_put before the return in
three places.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190815060609.3056-1-nishkadg.linux@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

The ST pinctrl driver wants to provode a gpio_chip but is not
including the header for this, fix the inclusion to use the right
header. <linux/of_gpio.h> has to remain as the driver is calling
of_get_named_gpio().

Cc: Patrice Chotard <patrice.chotard@st.com>
Cc: Maxime Coquelin <maxime.coquelin@st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190820111135.10701-1-linus.walleij@linaro.org

Static structures rk805_pinctrl_desc and rk805_gpio_chip, of types
gpio_chip and pinctrl_desc respectively, are not used except to be
copied into the fields of a different variable. Hence make
rk805_pinctrl_desc and rk805_gpio_chip both constant to protect them
from unintended modification.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Link: https://lore.kernel.org/r/20190819075757.1753-1-nishkadg.linux@gmail.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

This patch adds pinctrl register read to flush all the prior pinctrl
writes and then adds barrier for pinctrl register read to complete
during resume to make sure all pinctrl changes are effective.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-3-git-send-email-skomatineni@nvidia.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

pmx_writel uses writel which inserts write barrier before the
register write.

This patch has fix to replace writel with writel_relaxed followed
by a readback and memory barrier to ensure write operation is
completed for successful pinctrl change.
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
Link: https://lore.kernel.org/r/1565984527-5272-2-git-send-email-skomatineni@nvidia.comSigned-off-by: Linus Walleij <linus.walleij@linaro.org>

We need to convert all old gpio irqchips to pass the irqchip
setup along when adding the gpio_chip. For more info see
drivers/gpio/TODO.

For chained irqchips this is a pretty straight-forward
conversion.

Cc: Pramod Kumar <pramodku@broadcom.com>
Cc: Ray Jui <rjui@broadcom.com>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Thierry Reding <treding@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20190812132554.18313-1-linus.walleij@linaro.orgAcked-by: Scott Branden <scott.branden@broadcom.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

Pull MTD fix from Richard Weinberger:
 "A single fix for MTD to correctly set the spi-nor WP pin"

* tag 'fixes-for-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: spi-nor: Fix the disabling of write protection at init

Pull btrfs fixes from David Sterba:
 "Two fixes that popped up during testing:

   - fix for sysfs-related code that adds/removes block groups, warnings
     appear during several fstests in connection with sysfs updates in
     5.3, the fix essentially replaces a workaround with scope NOFS and
     applies to 5.2-based branch too

   - add sanity check of trim range"

* tag 'for-5.3-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: trim: Check the range passed into to prevent overflow
  Btrfs: fix sysfs warning and missing raid sysfs directories

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the inconsistent error handling in the umwait init code

   - Rework the boot param zeroing so gcc9 stops complaining about out
     of bound memset. The resulting source code is actually more sane to
     read than the smart solution we had

   - Maintainers update so Tony gets involved when Intel models are
     added

   - Some more fallthrough fixes"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Save fields explicitly, zero out everything else
  MAINTAINERS, x86/CPU: Tony Luck will maintain asm/intel-family.h
  x86/fpu/math-emu: Address fallthrough warnings
  x86/apic/32: Fix yet another implicit fallthrough warning
  x86/umwait: Fix error handling in umwait_init()

Pull EFI fix from Thomas Gleixner:
 "A single fix for a EFI mixed mode regression caused by recent rework
  which did not take the firmware bitwidth into account"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi-stub: Fix get_efi_config_table on mixed-mode setups

Pull SPDX fixes from Greg KH:
 "Here are four small SPDX fixes for 5.3-rc5.

  A few style fixes for some SPDX comments, added an SPDX tag for one
  file, and fix up some GPL boilerplate for another file.

  All of these have been in linux-next for a few weeks with no reported
  issues (they are comment changes only, so that's to be expected...)"

* tag 'spdx-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx:
  i2c: stm32: Use the correct style for SPDX License Identifier
  intel_th: Use the correct style for SPDX License Identifier
  coccinelle: api/atomic_as_refcounter: add SPDX License Identifier
  kernel/configs: Replace GPL boilerplate code with SPDX identifier

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.3-rc5.

  These are two different subsystems needing some fixes, the habanalabs
  driver which is has some more big endian fixes for problems found. The
  other are some small soundwire fixes, including some Kconfig
  dependencies needed to resolve reported build errors.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'char-misc-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: xilinx-sdfec: fix dependency and build error
  habanalabs: fix device IRQ unmasking for BE host
  habanalabs: fix endianness handling for internal QMAN submission
  habanalabs: fix completion queue handling when host is BE
  habanalabs: fix endianness handling for packets from user
  habanalabs: fix DRAM usage accounting on context tear down
  habanalabs: Avoid double free in error flow
  soundwire: fix regmap dependencies and align with other serial links
  soundwire: cadence_master: fix definitions for INTSTAT0/1
  soundwire: cadence_master: fix register definition for SLAVE_STATE

Pull staging/IIO fixes from Greg KH:
 "Here are four small staging and iio driver fixes for 5.3-rc5

  Two are for the dt3000 comedi driver for some reported problems found
  in that codebase, and two are some small iio fixes.

  All of these have been in linux-next this week with no reported
  issues"

* tag 'staging-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: comedi: dt3000: Fix rounding up of timer divisor
  staging: comedi: dt3000: Fix signed integer overflow 'divider * base'
  iio: adc: max9611: Fix temperature reading in probe
  iio: frequency: adf4371: Fix output frequency setting

Pull USB fixes from Greg KH:
 "Here are number of small USB fixes for 5.3-rc5.

  Syzbot has been on a tear recently now that it has some good USB
  debugging hooks integrated, so there's a number of fixes in here found
  by those tools for some _very_ old bugs. Also a handful of gadget
  driver fixes for reported issues, some hopefully-final dma fixes for
  host controller drivers, and some new USB serial gadget driver ids.

  All of these have been in linux-next this week with no reported issues
  (the usb-serial ones were in linux-next in its own branch, but merged
  into mine on Friday)"

* tag 'usb-5.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: add a hcd_uses_dma helper
  usb: don't create dma pools for HCDs with a localmem_pool
  usb: chipidea: imx: fix EPROBE_DEFER support during driver probe
  usb: host: fotg2: restart hcd after port reset
  USB: CDC: fix sanity checks in CDC union parser
  usb: cdc-acm: make sure a refcount is taken early enough
  USB: serial: option: add the BroadMobi BM818 card
  USB: serial: option: Add Motorola modem UARTs
  USB: core: Fix races in character device registration and deregistraion
  usb: gadget: mass_storage: Fix races between fsg_disable and fsg_set_alt
  usb: gadget: composite: Clear "suspended" on reset/disconnect
  usb: gadget: udc: renesas_usb3: Fix sysfs interface of "role"
  USB: serial: option: add D-Link DWM-222 device ID
  USB: serial: option: Add support for ZTE MF871A

Pull block fixes from Jens Axboe:
 "A collection of fixes that should go into this series. This contains:

   - Revert of the REQ_NOWAIT_INLINE and associated dio changes. There
     were still corner cases there, and even though I had a solution for
     it, it's too involved for this stage. (me)

   - Set of NVMe fixes (via Sagi)

   - io_uring fix for fixed buffers (Anthony)

   - io_uring defer issue fix (Jackie)

   - Regression fix for queue sync at exit time (zhengbin)

   - xen blk-back memory leak fix (Wenwen)"

* tag 'for-linus-2019-08-17' of git://git.kernel.dk/linux-block:
  io_uring: fix an issue when IOSQE_IO_LINK is inserted into defer list
  block: remove REQ_NOWAIT_INLINE
  io_uring: fix manual setup of iov_iter for fixed buffers
  xen/blkback: fix memory leaks
  blk-mq: move cancel of requeue_work to the front of blk_exit_queue
  nvme-pci: Fix async probe remove race
  nvme: fix controller removal race with scan work
  nvme-rdma: fix possible use-after-free in connect error flow
  nvme: fix a possible deadlock when passthru commands sent to a multipath device
  nvme-core: Fix extra device_put() call on error path
  nvmet-file: fix nvmet_file_flush() always returning an error
  nvmet-loop: Flush nvme_delete_wq when removing the port
  nvmet: Fix use-after-free bug when a port is removed
  nvme-multipath: revalidate nvme_ns_head gendisk in nvme_validate_ns

Pull Hyper-V fixes from Sasha Levin:

 - A few fixes for the userspace hyper-v tools from Adrian Vladu.

 - A fix for the hyper-v MAINTAINERs entry from Lan Tianyu.

 - Fix for SPDX license identifier in the userspace tools from Nishad
   Kamdar.

* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  MAINTAINERS: Fix Hyperv vIOMMU driver file name
  tools: hv: Use the correct style for SPDX License Identifier
  tools: hv: fix typos in toolchain
  tools: hv: fix KVP and VSS daemons exit code
  tools: hv: fixed Python pep8/flake8 warnings for lsvmbus

The Hyperv vIOMMU file name should be "hyperv-iommu.c" rather
than "hyperv_iommu.c". This patch is to fix it.
Signed-off-by: Lan Tianyu <Tianyu.Lan@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

This patch corrects the SPDX License Identifier style
in the trace header file related to Microsoft Hyper-V
client drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)

Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fix typos in the HyperV toolchain.
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

HyperV KVP and VSS daemons should exit with 0 when the '--help'
or '-h' flags are used.
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Fixed pep8/flake8 python style code for lsvmbus tool.

The TAB indentation was on purpose ignored (pep8 rule W191) to make
sure the code is complying with the Linux code guideline.
The following command doe not show any warnings now:
pep8 --ignore=W191 lsvmbus
flake8 --ignore=W191 lsvmbus
Signed-off-by: Adrian Vladu <avladu@cloudbasesolutions.com>

Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Cc: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Stephen Hemminger <sthemmin@microsoft.com>
Cc: Sasha Levin <sashal@kernel.org>
Cc: Dexuan Cui <decui@microsoft.com>
Cc: Alessandro Pilotti <apilotti@cloudbasesolutions.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

Pull i2c fixes from Wolfram Sang:
 "I2C has one revert because of a regression, two fixes for tiny race
  windows (which we were not able to trigger), a MAINTAINERS addition,
  and a SPDX fix"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: stm32: Use the correct style for SPDX License Identifier
  i2c: emev2: avoid race when unregistering slave client
  i2c: rcar: avoid race when unregistering slave client
  MAINTAINERS: i2c-imx: take over maintainership
  Revert "i2c: imx: improve the error handling in i2c_imx_dma_request()"