- 01 Oct, 2022 1 commit
-
-
Takashi Iwai authored
The HDMI driver skips the notification handling from the graphics driver when the codec driver is being in the PM operation. This behavior was introduced by the commit eb399d3c ("ALSA: hda - Skip ELD notification during PM process"). This skip may cause a problem, as we may miss the ELD update when the connection/disconnection happens right at the runtime-PM operation of the audio codec. Although this workaround was valid at that time, it's no longer true; the fix was required just because the ELD update procedure needed to wake up the audio codec, which had lead to a runtime-resume during a runtime-suspend. Meanwhile, the ELD update procedure doesn't need a codec wake up any longer since the commit 788d441a ("ALSA: hda - Use component ops for i915 HDMI/DP audio jack handling"); i.e. there is no much reason for skipping the notification. Let's drop those checks for addressing the missing notification. Fixes: 788d441a ("ALSA: hda - Use component ops for i915 HDMI/DP audio jack handling") Reported-by:
Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20220927135807.4097052-1-brent.lu@intel.com Link: https://lore.kernel.org/r/20221001074809.7461-1-tiwai@suse.deSigned-off-by:
Takashi Iwai <tiwai@suse.de>
-
- 30 Sep, 2022 3 commits
-
-
Takashi Iwai authored
When the driver hits -ENOMEM at allocating a URB or a buffer, it aborts and goes to the error path that releases the all previously allocated resources. However, when -ENOMEM hits at the middle of the sync EP URB allocation loop, the partially allocated URBs might be left without released, because ep->nurbs is still zero at that point. Fix it by setting ep->nurbs at first, so that the error handler loops over the full URB list. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220930100151.19461-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
At an error path to release URB buffers and contexts, the driver might hit a NULL dererence for u->urb pointer, when u->buffer_size has been already set but the actual URB allocation failed. Fix it by adding the NULL check of urb. Also, make sure that buffer_size is cleared after the error path or the close. Cc: <stable@vger.kernel.org> Reported-by:
Sabri N. Ferreiro <snferreiro1@gmail.com> Link: https://lore.kernel.org/r/CAKG+3NRjTey+fFfUEGwuxL-pi_=T4cUskYG9OzpzHytF+tzYng@mail.gmail.com Link: https://lore.kernel.org/r/20220930100129.19445-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
As the previous commit implies, a system may have a different SPI bus number that is embedded in the device string. And, assuming the fixed bus number is rather fragile; it may be assigned differently depending on the configuration or on the boot environment. Once when a bus number change happens, the binding fails, resulting in the silence. This patch tries to make the matching a bit more relaxed, allowing to bind with a different bus number (or without it). So the previous fix, the introduction of ALC245_FIXUP_CS35L41_SPI1_2 fixup became superfluous, and this is unified to ALC245_FIXUP_CS35L41_SPI_2. Fixes: 225f6e1b ("ALSA: hda/realtek: Add quirk for HP Zbook Firefly 14 G9 model") Link: https://lore.kernel.org/r/20220930084810.10435-1-tiwai@suse.deSigned-off-by:
-
- 29 Sep, 2022 3 commits
-
-
Takashi Iwai authored
HP Zbook Firefly 14 G9 model (103c:8abb) requires yet another binding with CS35L41 codec, but with a slightly different configuration. It's over spi1 instead of spi0. Create a new fixup entry for that. Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20220929061455.13355-1-tiwai@suse.deSigned-off-by:
-
Yuan Can authored
After commit 3285ea10("ALSA: asihpi - Interrelated HPI tidy up."), struct hpi_subsys_response is not used any more and can be removed as well. Signed-off-by:
Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20220928084833.61131-1-yuancan@huawei.comSigned-off-by:
-
Shang XiaoJing authored
Use DIV_ROUND_UP() instead of open-coding it, which intents and makes it more clear what is going on for the casual reviewer. The Coccinelle references Commit e4d8aef2 ("ALSA: usb: Use DIV_ROUND_UP() instead of open-coding it"). Signed-off-by:
Shang XiaoJing <shangxiaojing@huawei.com> Link: https://lore.kernel.org/r/20220927141110.18033-1-shangxiaojing@huawei.comSigned-off-by:
-
- 27 Sep, 2022 14 commits
-
-
Andreas Pape authored
Setting pointer and afterwards checking for wraparound leads to the possibility of returning the inconsistent pointer position. This patch increments buffer pointer atomically to avoid this issue. Fixes: e7f73a16 ("ASoC: Add dmaengine PCM helper functions") Signed-off-by:
Andreas Pape <apape@de.adit-jv.com> Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Link: https://lore.kernel.org/r/1664211493-11789-1-git-send-email-erosca@de.adit-jv.comSigned-off-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
Jaroslav Kysela <perex@perex.cz> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
-
Takashi Iwai authored
The recent change in ALSA core allows drivers to get the current PCM state directly from runtime object. Replace the calls accordingly. Reviewed-by:
-
Takashi Iwai authored
The mmap status record should be read-only. Modifying it from user-space may screw up things unexpectedly, so let's clear the write bits at exposing it. Note that alsa-lib and other known user-space apps access the mmapped status only as read-only, hence this change shouldn't break the existing applications. Reviewed-by:
-
Takashi Iwai authored
In the PCM core and driver code, there are lots place referring to the current PCM state via runtime->status->state. This patch introduced a local PCM state in runtime itself and replaces those references with runtime->state. It has improvements in two aspects: - The reduction of a indirect access leads to more code optimization - It avoids a possible (unexpected) modification of the state via mmap of the status record The status->state is updated together with runtime->state, so that user-space can still read the current state via mmap like before, too. This patch touches only the ALSA core code. The changes in each driver will follow in later patches. Reviewed-by:
-
Christophe JAILLET authored
There is already a SPDX-License-Identifier tag, so the corresponding license text can be removed. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/203c1db92c470925f31e361f6e7d180812501f2e.1664112023.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Christophe JAILLET authored
There is already a SPDX-License-Identifier tag, so the corresponding license text can be removed. While at it, be more consistent and: - add a missing .c (ff-protocol-latter) - remove an empty line (motu-protocol-v1) Signed-off-by:
-
- 26 Sep, 2022 2 commits
-
-
Kai Vehmanen authored
Use __GFP_RETRY_MAYFAIL instead of __GFP__NORETRY in snd_dma_dev_alloc(), snd_dma_wc_alloc() and friends, to allocate pages for device memory. The MAYFAIL flag retains the semantics of not triggering the OOM killer, but lowers the risk of alloc failure. MAYFAIL flag was added in commit dcda9b04 ("mm, tree wide: replace __GFP_REPEAT by __GFP_RETRY_MAYFAIL with more useful semantic"). This change addresses recurring failures with SOF audio driver in test cases where a system suspend-resume stress test is run, combined with an active high memory-load use-case. The failure typically shows up as: [ 379.480229] sof-audio-pci-intel-tgl 0000:00:1f.3: booting DSP firmware [ 379.484803] sof-audio-pci-intel-tgl 0000:00:1f.3: error: memory alloc failed: -12 [ 379.484810] sof-audio-pci-intel-tgl 0000:00:1f.3: error: dma prepare for ICCMAX stream failed Multiple fixes to reduce the memory usage of DSP boot have been identified in SOF driver, but even with those fixes, debug on affected systems has shown that even a single page alloc may fail with __GFP_NORETRY. When this occurs, system is under significant load on physical memory, but a lot of reclaimable pages are available, so the system has not run out of memory. With __GFP_RETRY_MAYFAIL, the errors are not hit in these stress tests. The alloc failure is severe as audio capability is completely lost if alloc failure is hit at system resume. An alternative solution was considered where the resources for DSP boot would be kept allocated until driver is unbound. This would avoid the allocation failure, but consume memory that is only needed temporarily at probe and resume time. It seems better to not hang on to the memory, but rather work a bit harder for allocating the pages at resume. BugLink: https://github.com/thesofproject/linux/issues/3844Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20220923153501.3326041-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Jaroslav Kysela authored
The current hardware has up to 4 converters. Save little space. The limit 8 is enough even for a more improved hardware. Signed-off-by:
-
- 22 Sep, 2022 5 commits
-
-
Jaroslav Kysela authored
Per discussion on the alsa-devel mailing list [1], the legacy PIN to PCM device mapping is obsolete nowadays. The maximum number of the simultaneously usable PCM devices is equal to the HDMI codec converters. Remove the extra PCM devices (beyond the detected converters) and force the use of the dynamic PCM device allocation. The legacy code is removed. I believe that all HDMI codecs have the jack sensing feature. Move the check to the codec probe function and print a warning, if a codec without this feature is detected. [1] https://lore.kernel.org/alsa-devel/2f37e0b2-1e82-8c0b-2bbd-1e5038d6ecc6@perex.cz/ Cc: Kai Vehmanen <kai.vehmanen@linux.intel.com> Signed-off-by:
-
Takashi Iwai authored
-
ye xingchen authored
Return the value dsp_allocate_ports() directly instead of storing it in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/20220922112846.236987-1-ye.xingchen@zte.com.cnSigned-off-by:
-
Pierre-Louis Bossart authored
These two missed IDs need to be added for dynamic selection of drivers. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
-
Takashi Iwai authored
Merge tag 'asoc-fix-v6.0-rc6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.0 A few device specific fixes, nothing too large, and a new device ID for a Dell laptop.
-
- 21 Sep, 2022 2 commits
-
-
Jaroslav Kysela authored
It is useful for the debugging to print also the used HDA codec NIDs used for the given HDMI device. With the dynamic converter assignment the converter NID is changed dynamically. Signed-off-by:
-
Jaroslav Kysela authored
Make the code more readable. Signed-off-by:
-
- 20 Sep, 2022 10 commits
-
-
Takashi Iwai authored
We fixed the bug introduced by the patch for managing the shared clocks at the commit 809f44a0 ("ALSA: usb-audio: Clear fixed clock rate at closing EP"), but it was merely a workaround. By this change, the clock reference rate is cleared at each EP close, hence the still remaining EP may need a re-setup of rate unnecessarily. This patch introduces the proper refcounting for the clock reference object so that the clock setup is done only when needed. Fixes: 809f44a0 ("ALSA: usb-audio: Clear fixed clock rate at closing EP") Fixes: c11117b6 ("ALSA: usb-audio: Refcount multiple accesses on the single clock") Link: https://lore.kernel.org/r/20220920181126.4912-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
This is a second attempt to fix the bug appearing on Android with the recent kernel; the first try was ff878b40 and reverted at commit 79764ec7. The details taken from the v1 patch: One of the former changes for the endpoint management was the more consistent setup of endpoints at hw_params. snd_usb_endpoint_configure() is a single function that does the full setup, and it's called from both PCM hw_params and prepare callbacks. Although the EP setup at the prepare phase is usually skipped (by checking need_setup flag), it may be still effective in some cases like suspend/resume that requires the interface setup again. As it's a full and single setup, the invocation of snd_usb_endpoint_configure() includes not only the USB interface setup but also the buffer release and allocation. OTOH, doing the buffer release and re-allocation at PCM prepare phase is rather superfluous, and better to be done only in the hw_params phase. For those optimizations, this patch splits the endpoint setup to two phases: snd_usb_endpoint_set_params() and snd_usb_endpoint_prepare(), to be called from hw_params and from prepare, respectively. Note that this patch changes the driver operation slightly, effectively moving the USB interface setup again to PCM prepare stage instead of hw_params stage, while the buffer allocation and such initializations are still done at hw_params stage. And, the change of the USB interface setup timing (moving to prepare) gave an interesting "fix", too: it was reported that the recent kernels caused silent output at the beginning on playbacks on some devices on Android, and this change casually fixed the regression. It seems that those devices are picky about the sample rate change (or the interface change?), and don't follow the too immediate rate changes. Meanwhile, Android operates the PCM in the following order: - open, then hw_params with the possibly highest sample rate - close without prepare - re-open, hw_params with the normal sample rate - prepare, and start streaming This procedure ended up the hw_params twice with different rates, and because the recent kernel did set up the sample rate twice one and after, it screwed up the device. OTOH, the earlier kernels didn't set up the USB interface at hw_params, hence this problem didn't appear. Now, with this patch, the USB interface setup is again back to the prepare phase, and it works around the problem automagically. Although we should address the sample rate problem in a more solid way in future, let's keep things working as before for now. *** What's new in the take#2 patch: - The regression caused by the v1 patch (bko#216500) was due to the missing check of need_setup flag at hw_params. Now the check is added, and the snd_usb_endpoint_set_params() call is skipped when the running EP is re-opened. - There was another bug in v1 where the clock reference rate wasn't updated at hw_params phase, which may lead to a lack of the proper hw constraints when an application doesn't issue the prepare but only the hw_params call. This patch fixes it as well by tracking the clock rate change in the prepare callback with a new flag "need_update" for the clock reference object, just like others. - The configure_endpoints() are simplified and folded back into snd_usb_pcm_prepare(). Fixes: bf6313a0 ("ALSA: usb-audio: Refactor endpoint management") Fixes: ff878b40 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare") Reported-by:
chihhao chen <chihhao.chen@mediatek.com> Link: https://lore.kernel.org/r/87e6d6ae69d68dc588ac9acc8c0f24d6188375c3.camel@mediatek.com Link: https://lore.kernel.org/r/20220901124136.4984-1-tiwai@suse.de Link: https://bugzilla.kernel.org/show_bug.cgi?id=216500 Link: https://lore.kernel.org/r/20220920181106.4894-1-tiwai@suse.deSigned-off-by:
-
Takashi Iwai authored
-
Takashi Iwai authored
This reverts commit 32eeeed9. As the fix for endpoint configuration split is reverted at next, do another revert here for a clean patch application. Signed-off-by:
-
Takashi Iwai authored
This reverts commit ff878b40. Unfortunately the recent fix seems bringing another regressions with PulseAudio / pipewire, at least for Steinberg and MOTU devices. As a temporary solution, do a straight revert. The issue for Android will be revisited again later by another different fix (if any). Fixes: ff878b40 ("ALSA: usb-audio: Split endpoint setups for hw_params and prepare") Cc: <stable@vger.kernel.org> BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=216500 Link: https://lore.kernel.org/r/20220920113929.25162-1-tiwai@suse.deSigned-off-by:
-
ye xingchen authored
Return the value inb() directly instead of storing it in another redundant variable. Reported-by:
-
Pierre-Louis Bossart authored
By construction a host and link DMA are always decoupled. This decoupling happens in the assign() phase. There's no point in checking if the two parts are decoupled, this is by-design always-true. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
The snd_hdac_ext_stream_release() routine uses the bus reg_lock, but releases it before calling snd_hdac_stream_release() where the bus reg_lock is taken again. This creates a timing window where the link stream release could test an invalid 'opened' boolean status and fail to recouple the host and link parts. Fix by exposing a locked version of snd_hdac_stream_release() and use it without releasing the spinlock. Signed-off-by:
-
Pierre-Louis Bossart authored
The logic is needlessly complicated, the basic rule is: The host streams can be found by checking the 'opened' boolean. The link streams can be found by checking the 'link_locked' boolean. Once a stream is found, it can be unconditionally decoupled. The snd_hdac_ext_stream_decouple_locked() routine will make sure the register status is modified as needed and the 'decoupled' boolean set. Signed-off-by:
-
Pierre-Louis Bossart authored
Minor code reuse, no functionality change. Signed-off-by:
-
