- 21 Apr, 2015 11 commits
-
-
Ben Hutchings authored
Commit 355a901e ("tcp: make connect() mem charging friendly") changed tcp_send_syn_data() to perform an open-coded copy of the 'syn' skb rather than using skb_copy_expand(). The open-coded copy does not cover the skb_shared_info::gso_segs field, so in the new skb it is left set to 0. When this commit was backported into stable branches between 3.10.y and 3.16.7-ckty inclusive, it triggered the BUG() in tcp_transmit_skb(). Since Linux 3.18 the GSO segment count is kept in the tcp_skb_cb::tcp_gso_segs field and tcp_send_syn_data() does copy the tcp_skb_cb structure to the new skb, so mainline and newer stable branches are not affected. Set skb_shared_info::gso_segs to the correct value of 1. Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Andrew Elble authored
commit c1b8940b upstream. We have observed a BUG() crash in fs/attr.c:notify_change(). The crash occurs during an rsync into a filesystem that is exported via NFS. 1.) fs/attr.c:notify_change() modifies the caller's version of attr. 2.) 6de0ec00 ("VFS: make notify_change pass ATTR_KILL_S*ID to setattr operations") introduced a BUG() restriction such that "no function will ever call notify_change() with both ATTR_MODE and ATTR_KILL_S*ID set". Under some circumstances though, it will have assisted in setting the caller's version of attr to this very combination. 3.) 27ac0ffe ("locks: break delegations on any attribute modification") introduced code to handle breaking delegations. This can result in notify_change() being re-called. attr _must_ be explicitly reset to avoid triggering the BUG() established in #2. 4.) The path that that triggers this is via fs/open.c:chmod_common(). The combination of attr flags set here and in the first call to notify_change() along with a later failed break_deleg_wait() results in notify_change() being called again via retry_deleg without resetting attr. Solution is to move retry_deleg in chmod_common() a bit further up to ensure attr is completely reset. There are other places where this seemingly could occur, such as fs/utimes.c:utimes_common(), but the attr flags are not initially set in such a way to trigger this. Fixes: 27ac0ffe ("locks: break delegations on any attribute modification") Reported-by:
Eric Meddaugh <etmsys@rit.edu> Tested-by:
Andrew Elble <aweits@rit.edu> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Cc: J. Bruce Fields <bfields@fieldses.org> Signed-off-by:
-
Seth Jennings authored
commit 351fc4a9 upstream. Intel IA32 SDM Table 15-14 defines channel 0xf as 'not specified', but EDAC doesn't know about this and returns and INTERNAL ERROR when the channel is greater than NUM_CHANNELS: kernel: [ 1538.886456] CPU 0: Machine Check Exception: 0 Bank 1: 940000000000009f kernel: [ 1538.886669] TSC 2bc68b22e7e812 ADDR 46dae7000 MISC 0 PROCESSOR 0:306e4 TIME 1390414572 SOCKET 0 APIC 0 kernel: [ 1538.971948] EDAC MC1: INTERNAL ERROR: channel value is out of range (15 >= 4) kernel: [ 1538.972203] EDAC MC1: 0 CE memory read error on unknown memory (slot:0 page:0x46dae7 offset:0x0 grain:0 syndrome:0x0 - area:DRAM err_code:0000:009f socket:1 channel_mask:1 rank:0) This commit changes sb_edac to forward a channel of -1 to EDAC if the channel is not specified. edac_mc_handle_error() sets the channel to -1 internally after the error message anyway, so this commit should have no effect other than avoiding the INTERNAL ERROR message when the channel is not specified. Signed-off-by:
Seth Jennings <sjenning@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Vinson Lee <vlee@twopensource.com> Signed-off-by:
-
Jim Snow authored
commit 8c009100 upstream. Signed-off-by:
Jim Snow <jim.snow@intel.com> Signed-off-by:
Lukasz Anaczkowski <lukasz.anaczkowski@intel.com> Signed-off-by:
-
Tomas Henzl authored
commit 3b747298 upstream. Sometimes when the card is restarted it may cause - "irq 16: nobody cared (try booting with the "irqpoll" option)" that is likely caused so, that the card, after the hard reset finishes, pulls on the irq. Disabling the ints before or after the hpsa_kdump_hard_reset_controller fixes it. At this point we can't know in which state the card is, so using SA5_INTR_OFF + SA5_REPLY_INTR_MASK_OFFSET defines directly, instead of the function the drivers provides, seems to be apropriate. Reviewed-by:
Scott Teel <scott.teel@pmcs.com> Signed-off-by:
Don Brace <don.brace@pmcs.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Cc: Masoud Sharbiani <msharbiani@twopensource.com> Cc: Vinson Lee <vlee@twopensource.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Tomas Henzl authored
commit 03741d95 upstream. There is a potential memory leak in hpsa_kdump_hard_reset_controller. Reviewed-by:
Tomas Henzl <thenzl@redhat.com> Signed-off-by:
-
Tomas Henzl authored
commit 859c75ab upstream. Add a call to pci_set_master(...) missing in the previous patch "hpsa: refine the pci enable/disable handling". Found thanks to Rob Elliot. Signed-off-by:
Robert Elliott <elliott@hp.com> Tested-by:
-
Tomas Henzl authored
commit 132aa220 upstream. When a second(kdump) kernel starts and the hard reset method is used the driver calls pci_disable_device without previously enabling it, so the kernel shows a warning - [ 16.876248] WARNING: at drivers/pci/pci.c:1431 pci_disable_device+0x84/0x90() [ 16.882686] Device hpsa disabling already-disabled device ... This patch fixes it, in addition to this I tried to balance also some other pairs of enable/disable device in the driver. Unfortunately I wasn't able to verify the functionality for the case of a sw reset, because of a lack of proper hw. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Signed-off-by:
-
Igor Mammedov authored
commit 74496134 upstream. KVM guest can fail to startup with following trace on host: qemu-system-x86: page allocation failure: order:4, mode:0x40d0 Call Trace: dump_stack+0x47/0x67 warn_alloc_failed+0xee/0x150 __alloc_pages_direct_compact+0x14a/0x150 __alloc_pages_nodemask+0x776/0xb80 alloc_kmem_pages+0x3a/0x110 kmalloc_order+0x13/0x50 kmemdup+0x1b/0x40 __kvm_set_memory_region+0x24a/0x9f0 [kvm] kvm_set_ioapic+0x130/0x130 [kvm] kvm_set_memory_region+0x21/0x40 [kvm] kvm_vm_ioctl+0x43f/0x750 [kvm] Failure happens when attempting to allocate pages for 'struct kvm_memslots', however it doesn't have to be present in physically contiguous (kmalloc-ed) address space, change allocation to kvm_kvzalloc() so that it will be vmalloc-ed when its size is more then a page. Signed-off-by:
Igor Mammedov <imammedo@redhat.com> Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit f2a81036 upstream. The two kmemdup invocations can be unified. I find that the new placement of the comment makes it easier to see what happens. Reviewed-by:
Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Christian Borntraeger authored
commit f2a25160 upstream. __kvm_set_memory_region sets r to EINVAL very early. Doing it again is not necessary. The same is true later on, where r is assigned -ENOMEM twice. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
-
- 13 Apr, 2015 28 commits
-
-
Neal Cardwell authored
commit 666b8051 upstream. On processing cumulative ACKs, the FRTO code was not checking the SACKed bit, meaning that there could be a spurious FRTO undo on a cumulative ACK of a previously SACKed skb. The FRTO code should only consider a cumulative ACK to indicate that an original/unretransmitted skb is newly ACKed if the skb was not yet SACKed. The effect of the spurious FRTO undo would typically be to make the connection think that all previously-sent packets were in flight when they really weren't, leading to a stall and an RTO. Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Yuchung Cheng <ycheng@google.com> Fixes: e33099f9 ("tcp: implement RFC5682 F-RTO") Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Jonathan Davies authored
commit 0c36820e upstream. xen-netfront limits transmitted skbs to be at most 44 segments in size. However, GSO permits up to 65536 bytes, which means a maximum of 45 segments of 1448 bytes each. This slight reduction in the size of packets means a slight loss in efficiency. Since c/s 9ecd1a75, xen-netfront sets gso_max_size to XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER, where XEN_NETIF_MAX_TX_SIZE is 65535 bytes. The calculation used by tcp_tso_autosize (and also tcp_xmit_size_goal since c/s 6c09fa09) in determining when to split an skb into two is sk->sk_gso_max_size - 1 - MAX_TCP_HEADER. So the maximum permitted size of an skb is calculated to be (XEN_NETIF_MAX_TX_SIZE - MAX_TCP_HEADER) - 1 - MAX_TCP_HEADER. Intuitively, this looks like the wrong formula -- we don't need two TCP headers. Instead, there is no need to deviate from the default gso_max_size of 65536 as this already accommodates the size of the header. Currently, the largest skb transmitted by netfront is 63712 bytes (44 segments of 1448 bytes each), as observed via tcpdump. This patch makes netfront send skbs of up to 65160 bytes (45 segments of 1448 bytes each). Similarly, the maximum allowable mtu does not need to subtract MAX_TCP_HEADER as it relates to the size of the whole packet, including the header. Fixes: 9ecd1a75 ("xen-netfront: reduce gso_max_size to account for max TCP header") Signed-off-by:
Jonathan Davies <jonathan.davies@citrix.com> Signed-off-by:
-
Ido Shamay authored
commit e5eda89d upstream. Netdevice registration should be performed a the end of the driver initialization flow. If we don't do that, after calling register_netdevice, device callbacks may be issued by higher layers of the stack before final configuration of the device is done. For example (VXLAN configuration race), mlx4_SET_PORT_VXLAN was issued after the register_netdev command. System network scripts may configure the interface (UP) right after the registration, which also attach unicast VXLAN steering rule, before mlx4_SET_PORT_VXLAN was called, causing the firmware to fail the rule attachment. Fixes: 837052d0 ("net/mlx4_en: Add netdev support for TCP/IP offloads of vxlan tunneling") Signed-off-by:
Ido Shamay <idos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
WANG Cong authored
commit d079535d upstream. In case we move the whole dev group to another netns, we should call for_each_netdev_safe(), otherwise we get a soft lockup: NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [ip:798] irq event stamp: 255424 hardirqs last enabled at (255423): [<ffffffff81a2aa95>] restore_args+0x0/0x30 hardirqs last disabled at (255424): [<ffffffff81a2ad5a>] apic_timer_interrupt+0x6a/0x80 softirqs last enabled at (255422): [<ffffffff81079ebc>] __do_softirq+0x2c1/0x3a9 softirqs last disabled at (255417): [<ffffffff8107a190>] irq_exit+0x41/0x95 CPU: 0 PID: 798 Comm: ip Not tainted 4.0.0-rc4+ #881 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff8800d1b88000 ti: ffff880119530000 task.ti: ffff880119530000 RIP: 0010:[<ffffffff810cad11>] [<ffffffff810cad11>] debug_lockdep_rcu_enabled+0x28/0x30 RSP: 0018:ffff880119533778 EFLAGS: 00000246 RAX: ffff8800d1b88000 RBX: 0000000000000002 RCX: 0000000000000038 RDX: 0000000000000000 RSI: ffff8800d1b888c8 RDI: ffff8800d1b888c8 RBP: ffff880119533778 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 000000000000b5c2 R12: 0000000000000246 R13: ffff880119533708 R14: 00000000001d5a40 R15: ffff88011a7d5a40 FS: 00007fc01315f740(0000) GS:ffff88011a600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f367a120988 CR3: 000000011849c000 CR4: 00000000000007f0 Stack: ffff880119533798 ffffffff811ac868 ffffffff811ac831 ffffffff811ac828 ffff8801195337c8 ffffffff811ac8c9 ffff8801195339b0 ffff8801197633e0 0000000000000000 ffff8801195339b0 ffff8801195337d8 ffffffff811ad2d7 Call Trace: [<ffffffff811ac868>] rcu_read_lock+0x37/0x6e [<ffffffff811ac831>] ? rcu_read_unlock+0x5f/0x5f [<ffffffff811ac828>] ? rcu_read_unlock+0x56/0x5f [<ffffffff811ac8c9>] __fget+0x2a/0x7a [<ffffffff811ad2d7>] fget+0x13/0x15 [<ffffffff811be732>] proc_ns_fget+0xe/0x38 [<ffffffff817c7714>] get_net_ns_by_fd+0x11/0x59 [<ffffffff817df359>] rtnl_link_get_net+0x33/0x3e [<ffffffff817df3d7>] do_setlink+0x73/0x87b [<ffffffff810b28ce>] ? trace_hardirqs_off+0xd/0xf [<ffffffff81a2aa95>] ? retint_restore_args+0xe/0xe [<ffffffff817e0301>] rtnl_newlink+0x40c/0x699 [<ffffffff817dffe0>] ? rtnl_newlink+0xeb/0x699 [<ffffffff81a29246>] ? _raw_spin_unlock+0x28/0x33 [<ffffffff8143ed1e>] ? security_capable+0x18/0x1a [<ffffffff8107da51>] ? ns_capable+0x4d/0x65 [<ffffffff817de5ce>] rtnetlink_rcv_msg+0x181/0x194 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de407>] ? rtnl_lock+0x17/0x19 [<ffffffff817de44d>] ? __rtnl_unlock+0x17/0x17 [<ffffffff818327c6>] netlink_rcv_skb+0x4d/0x93 [<ffffffff817de42f>] rtnetlink_rcv+0x26/0x2d [<ffffffff81830f18>] netlink_unicast+0xcb/0x150 [<ffffffff8183198e>] netlink_sendmsg+0x501/0x523 [<ffffffff8115cba9>] ? might_fault+0x59/0xa9 [<ffffffff817b5398>] ? copy_from_user+0x2a/0x2c [<ffffffff817b7b74>] sock_sendmsg+0x34/0x3c [<ffffffff817b7f6d>] ___sys_sendmsg+0x1b8/0x255 [<ffffffff8115c5eb>] ? handle_pte_fault+0xbd5/0xd4a [<ffffffff8100a2b0>] ? native_sched_clock+0x35/0x37 [<ffffffff8109e94b>] ? sched_clock_local+0x12/0x72 [<ffffffff8109eb9c>] ? sched_clock_cpu+0x9e/0xb7 [<ffffffff810cadbf>] ? rcu_read_lock_held+0x3b/0x3d [<ffffffff811ac1d8>] ? __fcheck_files+0x4c/0x58 [<ffffffff811ac946>] ? __fget_light+0x2d/0x52 [<ffffffff817b8adc>] __sys_sendmsg+0x42/0x60 [<ffffffff817b8b0c>] SyS_sendmsg+0x12/0x1c [<ffffffff81a29e32>] system_call_fastpath+0x12/0x17 Fixes: e7ed828f ("netlink: support setting devgroup parameters") Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Shachar Raindel authored
commit 8494057a upstream. Properly verify that the resulting page aligned end address is larger than both the start address and the length of the memory area requested. Both the start and length arguments for ib_umem_get are controlled by the user. A misbehaving user can provide values which will cause an integer overflow when calculating the page aligned end address. This overflow can cause also miscalculation of the number of pages mapped, and additional logic issues. Addresses: CVE-2014-8159 Signed-off-by:
Shachar Raindel <raindel@mellanox.com> Signed-off-by:
Jack Morgenstein <jackm@mellanox.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Johannes Berg authored
commit 788211d8 upstream. There's an issue with the way the RX A-MPDU reorder timer is deleted that can cause a kernel crash like this: * tid_rx is removed - call_rcu(ieee80211_free_tid_rx) * station is destroyed * reorder timer fires before ieee80211_free_tid_rx() runs, accessing the station, thus potentially crashing due to the use-after-free The station deletion is protected by synchronize_net(), but that isn't enough -- ieee80211_free_tid_rx() need not have run when that returns (it deletes the timer.) We could use rcu_barrier() instead of synchronize_net(), but that's much more expensive. Instead, to fix this, add a field tracking that the session is being deleted. In this case, the only re-arming of the timer happens with the reorder spinlock held, so make that code not rearm it if the session is being deleted and also delete the timer after setting that field. This ensures the timer cannot fire after ___ieee80211_stop_rx_ba_session() returns, which fixes the problem. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Stefan Lippers-Hollmann authored
commit 80313b30 upstream. The ASRock Q1900DC-ITX mainboard (Baytrail-D) hangs randomly in both BIOS and UEFI mode while rebooting unless reboot=pci is used. Add a quirk to reboot via the pci method. The problem is very intermittent and hard to debug, it might succeed rebooting just fine 40 times in a row - but fails half a dozen times the next day. It seems to be slightly less common in BIOS CSM mode than native UEFI (with the CSM disabled), but it does happen in either mode. Since I've started testing this patch in late january, rebooting has been 100% reliable. Most of the time it already hangs during POST, but occasionally it might even make it through the bootloader and the kernel might even start booting, but then hangs before the mode switch. The same symptoms occur with grub-efi, gummiboot and grub-pc, just as well as (at least) kernel 3.16-3.19 and 4.0-rc6 (I haven't tried older kernels than 3.16). Upgrading to the most current mainboard firmware of the ASRock Q1900DC-ITX, version 1.20, does not improve the situation. ( Searching the web seems to suggest that other Bay Trail-D mainboards might be affected as well. ) -- Signed-off-by:
Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: Matt Fleming <matt.fleming@intel.com> Link: http://lkml.kernel.org/r/20150330224427.0fb58e42@mirSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Ujfalusi authored
commit 02d88b73 upstream. In omap_dma_start_desc the vdesc->node is removed from the virt-dma framework managed lists (to be precise from the desc_issued list). If a terminate_all comes before the transfer finishes the omap_desc will not be freed up because it is not in any of the lists and we stopped the DMA channel so the transfer will not going to complete. There is no special sequence for leaking memory when using cyclic (audio) transfer: with every start and stop of a cyclic transfer the driver leaks struct omap_desc worth of memory. Free up the allocated memory directly in omap_dma_terminate_all() since the framework will not going to do that for us. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@ti.com> CC: <linux-omap@vger.kernel.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
-
Petr Kulhavy authored
commit 5ca9e7ce upstream. If edma_terminate_all() was called while a transfer was running (i.e. after edma_execute() but before edma_callback()) the echan->edesc was not freed. This was due to the fact that a running transfer is on none of the vchan lists: desc_submitted, desc_issued, desc_completed (edma_execute() removes it from the desc_issued list), so the vchan_dma_desc_free_list() called at the end of edma_terminate_all() didn't find it and didn't free it. This bug was found on an AM1808 based hardware (very similar to da850evm, however using the second MMC/SD controller), where intense operations on the SD card wasted the device 128MB RAM within a couple of days. Peter Ujfalusi: The issue is even more severe since it affects cyclic (audio) transfers as well. In this case starting/stopping audio will results memory leak. Signed-off-by:
Petr Kulhavy <petr@barix.com> Signed-off-by:
-
Darshana Padmadas authored
commit 4ce7ca89 upstream. This patch uses iio_trigger_get to increment the reference count of trigger device, to avoid incorrect assignment. Can result in a null pointer dereference during removal if the trigger has been changed before removal. This patch refers to a similar situation encountered through the following discussion: http://www.spinics.net/lists/linux-iio/msg13669.htmlSigned-off-by:
Darshana Padmadas <darshanapadmadas@gmail.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Stefan Agner authored
commit f54e9f2b upstream. Depending on conversion mode used, the ADC clock (ADCK) needs to be below a maximum frequency. According to Vybrid's data sheet this is 20MHz for the low power conversion mode. The ADC clock is depending on input clock, which is the bus clock by default. Vybrid SoC are typically clocked at at 400MHz or 500MHz, which leads to 66MHz or 83MHz bus clock respectively. Hence, a divider of 8 is required to stay below the specified maximum clock of 20MHz. Due to the different bus clock speeds, the resulting sampling frequency is not static. Hence use the ADC clock and calculate the actual available sampling frequency dynamically. This fixes bogous values observed on some 500MHz clocked Vybrid SoC. The resulting value usually showed Bit 9 being stuck at 1, or 0, which lead to a value of +/-512. Signed-off-by:
Stefan Agner <stefan@agner.ch> Acked-by:
Fugang Duan <B38611@freescale.com> Signed-off-by:
-
David Miller authored
commit f2c9e560 upstream. Use readb() and memcpy_fromio() accessors instead. Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 3899ca84 upstream. Need to expand the check to handle short circuiting if the selected state is the same as current state. bug: https://bugs.freedesktop.org/show_bug.cgi?id=87796Signed-off-by:
-
Stefan Agner authored
commit 8e4934c6 upstream. When the receiver was enabled during startup, a character could have been in the FIFO when the UART get initially used. The driver configures the (receive) watermark level, and flushes the FIFO. However, the receive flag (RDRF) could still be set at that stage (as mentioned in the register description of UARTx_RWFIFO). This leads to an interrupt which won't be handled properly in interrupt mode: The receive interrupt function lpuart_rxint checks the FIFO count, which is 0 at that point (due to the flush during initialization). The problem does not manifest when using DMA to receive characters. Fix this situation by explicitly read the status register, which leads to clearing of the RDRF flag. Due to the flush just after the status flag read, a explicit data read is not to required. Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Doug Goldstein authored
commit b229a0f8 upstream. This patch uses the existing CALAO Systems ftdi_8u2232c_probe in order to avoid attaching a TTY to the JTAG port as this board is based on the CALAO Systems reference design and needs the same fix up. Signed-off-by:
Doug Goldstein <cardoe@cardoe.com> [johan: clean up probe logic ] Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Lu Baolu authored
commit 227a4fd8 upstream. When a device with an isochronous endpoint is plugged into the Intel xHCI host controller, and the driver submits multiple frames per URB, the xHCI driver will set the Block Event Interrupt (BEI) flag on all but the last TD for the URB. This causes the host controller to place an event on the event ring, but not send an interrupt. When the last TD for the URB completes, BEI is cleared, and we get an interrupt for the whole URB. However, under Intel xHCI host controllers, if the event ring is full of events from transfers with BEI set, an "Event Ring is Full" event will be posted to the last entry of the event ring, but no interrupt is generated. Host will cease all transfer and command executions and wait until software completes handling the pending events in the event ring. That means xHC stops, but event of "event ring is full" is not notified. As the result, the xHC looks like dead to user. This patch is to apply XHCI_AVOID_BEI quirk to Intel xHC devices. And it should be backported to kernels as old as 3.0, that contains the commit 69e848c2 ("Intel xhci: Support EHCI/xHCI port switching."). Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Tested-by:
Alistair Grant <akgrant0710@gmail.com> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
commit 9425183d upstream. Linux xHCI driver doesn't report and handle port cofig error change. If Port Configure Error for root hub port occurs, CEC bit in PORTSC would be set by xHC and remains 1. This happends when the root port fails to configure its link partner, e.g. the port fails to exchange port capabilities information using Port Capability LMPs. Then the Port Status Change Events will be blocked until all status change bits(CEC is one of the change bits) are cleared('0') (refer to xHCI spec 4.19.2). Otherwise, the port status change event for this root port will not be generated anymore, then root port would look like dead for user and can't be recovered until a Host Controller Reset(HCRST). This patch is to check CEC bit in PORTSC in xhci_get_port_status() and set a Config Error in the return status if CEC is set. This will cause a ClearPortFeature request, where CEC bit is cleared in xhci_clear_port_change_bit(). [The commit log is based on initial Marvell patch posted at http://marc.info/?l=linux-kernel&m=142323612321434&w=2] Reported-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Juergen Gross authored
commit 3c56b3a1 upstream. Commit 25b884a8 ("x86/xen: set regions above the end of RAM as 1:1") introduced a regression. To be able to add memory pages which were added via memory hotplug to a pv domain, the pages must be "invalid" instead of "identity" in the p2m list before they can be added. Suggested-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Juergen Gross <jgross@suse.com> Reviewed-by:
Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by:
-
Andreas Werner authored
commit 555828ef upstream. Return EPROBE_DEFER if Regulator returns EPROBE_DEFER If the Flexcan driver is built into kernel and a regulator is used to enable the CAN transceiver, the Flexcan driver may not use the regulator. When initializing the Flexcan device with a regulator defined in the device tree, but not initialized, the regulator subsystem returns EPROBE_DEFER, hence the Flexcan init fails. The solution for this is to return EPROBE_DEFER if regulator is not initialized and wait until the regulator is initialized. Signed-off-by:
Andreas Werner <kernel@andy89.org> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
David Disseldorp authored
commit e1e9bda2 upstream. Under intermittent network outages, find_writable_file() is susceptible to the following race condition, which results in a user-after-free in the cifs_writepages code-path: Thread 1 Thread 2 ======== ======== inv_file = NULL refind = 0 spin_lock(&cifs_file_list_lock) // invalidHandle found on openFileList inv_file = open_file // inv_file->count currently 1 cifsFileInfo_get(inv_file) // inv_file->count = 2 spin_unlock(&cifs_file_list_lock); cifs_reopen_file() cifs_close() // fails (rc != 0) ->cifsFileInfo_put() spin_lock(&cifs_file_list_lock) // inv_file->count = 1 spin_unlock(&cifs_file_list_lock) spin_lock(&cifs_file_list_lock); list_move_tail(&inv_file->flist, &cifs_inode->openFileList); spin_unlock(&cifs_file_list_lock); cifsFileInfo_put(inv_file); ->spin_lock(&cifs_file_list_lock) // inv_file->count = 0 list_del(&cifs_file->flist); // cleanup!! kfree(cifs_file); spin_unlock(&cifs_file_list_lock); spin_lock(&cifs_file_list_lock); ++refind; // refind = 1 goto refind_writable; At this point we loop back through with an invalid inv_file pointer and a refind value of 1. On second pass, inv_file is not overwritten on openFileList traversal, and is subsequently dereferenced. Signed-off-by:
David Disseldorp <ddiss@suse.de> Reviewed-by:
Jeff Layton <jlayton@samba.org> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Sachin Prabhu authored
commit 2477bc58 upstream. While attempting to clone a file on a samba server, we receive a STATUS_INVALID_DEVICE_REQUEST. This is mapped to -EOPNOTSUPP which isn't handled in smb2_clone_range(). We end up looping in the while loop making same call to the samba server over and over again. The proposed fix is to exit and return the error value when encountered with an unhandled error. Signed-off-by:
Sachin Prabhu <sprabhu@redhat.com> Signed-off-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
-
Nathaniel W Filardo authored
commit 5e71fc86 upstream. Add USB VID/PID for Xircom PGMFHUB USB/serial component. (The hub and SCSI bridge on that hardware are recognized out of the box by existing drivers.) Tested VID/PID using new_id and loopback connection and was met with success, but that's all the testing done. Signed-off-by:
Nathaniel Wesley Filardo <nwf@cs.jhu.edu> Signed-off-by:
-
Mark Knibbs authored
commit 5f9f975b upstream. Entrega is misspelled as Entregra or Entrgra, so fix that. Signed-off-by:
Mark Knibbs <markk@clara.co.uk> Signed-off-by:
-
Emmanuel Grumbach authored
commit 9c8928f5 upstream. The assumption before this patch was that we don't need to run again the INIT firmware after the system booted. The INIT firmware runs calibrations which impact the physical layer's behavior. Users reported that it may be helpful to run these calibrations again every time the interface is brought up. The penatly is minimal, since the calibrations run fast. This fixes: https://bugzilla.kernel.org/show_bug.cgi?id=94341Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Doug Goldstein authored
commit 4899c054 upstream. Synapse Wireless uses the FTDI VID with a custom PID of 0x9090 for their SNAP Stick 200 product. Signed-off-by:
-
Martin Fuzzey authored
commit c1b03ab5 upstream. When an error occurred during event registration memory was freed twice resulting in kernel memory corruption and a crash in unrelated code. The problem was caused by iio_device_unregister_eventset() iio_device_unregister_sysfs() being called twice, once on the error path and then again via iio_dev_release(). Fix this by making these two functions idempotent so they may be called multiple times. The problem was observed before applying 78b33216 iio:core: Handle error when mask type is not separate Signed-off-by:
Martin Fuzzey <mfuzzey@parkeon.com> Signed-off-by:
-
Viorel Suman authored
commit 4dac0a8e upstream. A hardware fifo reset always imply an invalidation of the existing timestamps, so we'll clear timestamps fifo on successfull hardware fifo reset. Signed-off-by:
Viorel Suman <viorel.suman@gmail.com> Signed-off-by:
-
Octavian Purdila authored
commit 70dddeee upstream. If the in-kernel push interface is used we may have a different masks on the device buffer and the kernel buffer and in this case the device should generate data for the reunion of the buffers, which is available at indio_dev->active_scan_mask. Compiled tested only except for bmc150-accel which was tested at runtime with the hardware. Signed-off-by:
Octavian Purdila <octavian.purdila@intel.com> Signed-off-by:
-
- 10 Apr, 2015 1 commit
-
-
D.S. Ljungmark authored
commit 6fd99094 upstream. A local route may have a lower hop_limit set than global routes do. RFC 3756, Section 4.2.7, "Parameter Spoofing" > 1. The attacker includes a Current Hop Limit of one or another small > number which the attacker knows will cause legitimate packets to > be dropped before they reach their destination. > As an example, one possible approach to mitigate this threat is to > ignore very small hop limits. The nodes could implement a > configurable minimum hop limit, and ignore attempts to set it below > said limit. Signed-off-by:
D.S. Ljungmark <ljungmark@modio.se> Acked-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
