- 21 Feb, 2014 11 commits
-
-
Martin Schwidefsky authored
Git commit 050eef36 "[S390] fix tlb flushing vs. concurrent /proc accesses" introduced the attach counter to avoid using the mm_users value to decide between IPTE for every PTE and lazy TLB flushing with IDTE. That fixed the problem with mm_users but it introduced another subtle race, fortunately one that is very hard to hit. The background is the requirement of the architecture that a valid PTE may not be changed while it can be used concurrently by another cpu. The decision between IPTE and lazy TLB flushing needs to be done while the PTE is still valid. Now if the virtual cpu is temporarily stopped after the decision to use lazy TLB flushing but before the invalid bit of the PTE has been set, another cpu can attach the mm, find that flush_mm is set, do the IDTE, return to userspace, and recreate a TLB that uses the PTE in question. When the first, stopped cpu continues it will change the PTE while it is attached on another cpu. The first cpu will do another IDTE shortly after the modification of the PTE which makes the race window quite short. To fix this race the CPU that wants to attach the address space of a user space thread needs to wait for the end of the PTE modification. The number of concurrent TLB flushers for an mm is tracked in the upper 16 bits of the attach_count and finish_arch_post_lock_switch is used to wait for the end of the flush operation if required. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com>
-
Martin Schwidefsky authored
The finish_arch_post_lock_switch is called at the end of the task switch after all locks have been released. In concept it is paired with the switch_mm function, but the current code only does the call in finish_task_switch. Add the call to idle_task_exit and use_mm. One use case for the additional calls is s390 which will use finish_arch_post_lock_switch to wait for the completion of TLB flush operations. Signed-off-by: -
Heiko Carstens authored
The uaccesspt kernel parameter allows to enforce using the uaccess page table walk variant. This is mainly for debugging purposes, so this mode can also be enabled on machines which support the mvcos instruction. Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Heiko Carstens authored
Remove another leftover from the time when we supported running user space in either home or primary address space. Signed-off-by:
-
Heiko Carstens authored
MACHINE_HAS_MVCOS is used exactly once when the machine is brought up. There is no need to cache the flag in the machine_flags. Signed-off-by:
-
Heiko Carstens authored
The types 'size_t' and 'unsigned long' have been used randomly for the uaccess functions. This looks rather confusing. So let's change all functions to use unsigned long instead and get rid of size_t in order to have a consistent interface. The only exception is strncpy_from_user() which uses 'long' since it may return a signed value (-EFAULT). Signed-off-by:
-
Heiko Carstens authored
There are only two uaccess variants on s390 left: the version that is used if the mvcos instruction is available, and the page table walk variant. So there is no need for expensive indirect function calls. By default the mvcos variant will be called. If the mvcos instruction is not available it will call the page table walk variant. For minimal performance impact the "if (mvcos_is_available)" is implemented with a jump label, which will be a six byte nop on machines with mvcos. Signed-off-by:
-
Heiko Carstens authored
For some unknown reason the indirect uaccess functions on s390 implement a different parameter order than what is usual. e.g.: unsigned long copy_to_user(void *to, const void *from, unsigned long n); vs. size_t (*copy_to_user)(size_t n, void __user * to, const void *from); Let's get rid of this confusing parameter reordering. Signed-off-by:
-
Sebastian Ott authored
Interrupts which happen on ccw consoles prior to their registration with the driver core are not accounted to the respective device driver. Fix this by setting the proper interrupt class during initialization of ccw consoles. Reviewed-by:
Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by:
Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by:
-
Sebastian Ott authored
Drivers for ccw consoles use ccw_device_probe_console to receive an initialized ccw device which is already enabled for interrupts. After that the device driver does the initialization of its private data. This can race with unsolicited interrupts which can happen once the device is enabled for interrupts. Split ccw_device_probe_console into ccw_device_create_console and ccw_device_enable_console and reorder the initialization of the ccw console drivers. While at it mark these functions as __init. Reviewed-by:
-
Sebastian Ott authored
ccw consoles are in use before they can be properly registered with the driver core. For devices which are in use by a device driver we rely on the ccw_device's pointer to the driver callbacks to be valid. For ccw consoles this pointer is NULL until they are registered later during boot and we dereferenced this pointer. This worked by chance on 64 bit builds (cdev->drv was NULL but the optional callback cdev->drv->path_event was also NULL by coincidence) and was unnoticed until we received reports about boot failures on 31 bit systems. Fix it by initializing the driver pointer for ccw consoles. Cc: <stable@vger.kernel.org> # 3.10+ Reported-by:
Mike Frysinger <vapier@gentoo.org> Reported-by:
-
- 19 Feb, 2014 2 commits
-
-
git://people.freedesktop.org/~airlied/linuxLinus Torvalds authored
Pull drm fixes from Dave Airlie: "Lots of little small things, nothing too major: nouveau regression fixes, vmware fixes for the new hw support, memory leaks in error path fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) drm/radeon/ni: fix typo in dpm sq ramping setup drm/radeon/si: fix typo in dpm sq ramping setup drm/radeon: fix CP semaphores on CIK drm/radeon: delete a stray tab drm/radeon: fix display tiling setup on SI drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200 drm/radeon: fill in DRM_CAPs for cursor size drm: add DRM_CAPs for cursor size drm/radeon: unify bpc handling drm/ttm: Fix memory leak in ttm_agp_backend.c drm/ttm: declare 'struct device' in ttm_page_alloc.h drm/nouveau: fix TTM_PL_TT memtype on pre-nv50 drm/nv50/disp: use correct register to determine DP display bpp drm/nouveau/fb: use correct ram oclass for nv1a hardware drm/nv50/gr: add missing nv_error parameter priv drm/nouveau: fix ENG_RUNLIST register address drm/nv4c/bios: disallow retrieving from prom on nv4x igp's drm/nv4c/vga: decode register is in a different place on nv4x igp's drm/nv4c/mc: nv4x igp's have a different msi rearm register drm/nouveau: set irq_enabled manually ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hidLinus Torvalds authored
Pull HID update from Jiri Kosina: - fixes for several bugs in incorrect allocations of buffers by David Herrmann and Benjamin Tissoires. - support for a few new device IDs by Archana Patni, Benjamin Tissoires, Huei-Horng Yo, Reyad Attiyat and Yufeng Shen * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: HID: hyperv: make sure input buffer is big enough HID: Bluetooth: hidp: make sure input buffers are big enough HID: hid-sensor-hub: quirk for STM Sensor hub HID: apple: add Apple wireless keyboard 2011 JIS model support HID: fix buffer allocations HID: multitouch: add FocalTech FTxxxx support HID: microsoft: Add ID's for Surface Type/Touch Cover 2 HID: usbhid: quirk for CY-TM75 75 inch Touch Overlay
-
- 18 Feb, 2014 27 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) kvaser CAN driver has fixed limits of some of it's table, validate that we won't exceed those limits at probe time. Fix from Olivier Sobrie. 2) Fix rtl8192ce disabling interrupts for too long, from Olivier Langlois. 3) Fix botched shift in ath5k driver, from Dan Carpenter. 4) Fix corruption of deferred packets in TIPC, from Erik Hugne. 5) Fix newlink error path in macvlan driver, from Cong Wang. 6) Fix netpoll deadlock in bonding, from Ding Tianhong. 7) Handle GSO packets properly in forwarding path when fragmentation is necessary on egress, from Florian Westphal. 8) Fix axienet build errors, from Michal Simek. 9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S Tsirkin. 10) Carrier status isn't set properly in hyperv driver, from Haiyang Zhang. 11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar. 12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX queue selection method. Add a fallback method mechanism to fix this bug, from Daniel Borkmann. 13) Fix regression in link local route handling on GRE tunnels, from Nicolas Dichtel. 14) Bonding can assign dup aggregator IDs in some sequences of configuration, fix by making the allocation counter per-bond instead of global. From Jiri Bohac. 15) sctp_connectx() needs compat translations, from Daniel Borkmann. 16) Fix of_mdio PHY interrupt parsing, from Ben Dooks * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) MAINTAINERS: add entry for the PHY library of_mdio: fix phy interrupt passing net: ethernet: update dependency and help text of mvneta NET: fec: only enable napi if we are successful af_packet: remove a stray tab in packet_set_ring() net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode ipv4: fix counter in_slow_tot irtty-sir.c: Do not set_termios() on irtty_close() bonding: 802.3ad: make aggregator_identifier bond-private usbnet: remove generic hard_header_len check gre: add link local route when local addr is any batman-adv: fix potential kernel paging error for unicast transmissions batman-adv: avoid double free when orig_node initialization fails batman-adv: free skb on TVLV parsing success batman-adv: fix TT CRC computation by ensuring byte order batman-adv: fix potential orig_node reference leak batman-adv: avoid potential race condition when adding a new neighbour batman-adv: properly check pskb_may_pull return value batman-adv: release vlan object after checking the CRC batman-adv: fix TT-TVLV parsing on OGM reception ... -
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "A range of ARM fixes. Biggest change is the stage-2 attributes used for for hyp mode which were wrong. I've killed some bits in a couple of DT files which turned out not to be required, and a few other fixes. One fix touches code outside of arch/arm, which is related to sorting out the DMA masks correctly. There is a long standing issue with the conversion from PFNs to addresses where people assume that shifting an unsigned long left by PAGE_SHIFT results in a correct address. This is not the case with C: the integer promotion happens at assignment after evaluation. This fixes the recently introduced dma_max_pfn() function, but there's a number of other places where we try this directly on an unsigned long in the mm code" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7957/1: add DSB after icache flush in __flush_icache_all() Fix uses of dma_max_pfn() when converting to a limiting address ARM: 7955/1: spinlock: ensure we have a compiler barrier before sev ARM: 7953/1: mm: ensure TLB invalidation is complete before enabling MMU ARM: 7952/1: mm: Fix the memblock allocation for LPAE machines ARM: 7950/1: mm: Fix stage-2 device memory attributes ARM: dts: fix spdif pinmux configuration
-
git://github.com/kleikamp/linux-shaggyLinus Torvalds authored
Pull jfs fix from David Kleikamp: "Another ACL regression. This one more subtle" * tag 'jfs-3.14-rc4' of git://github.com/kleikamp/linux-shaggy: jfs: set i_ctime when setting ACL
-
Florian Fainelli authored
The PHY library has been subject to some changes, new drivers and DT interactions over the past few months. Add myself as a maintainer for the core PHY library parts and drivers. Make sure the PHY library entry also covers the Device Tree files which have a close interaction with the MDIO bus, PHY connection and Ethernet PHY mode parsing. CC: Grant Likely <grant.likely@linaro.org> CC: Shaohui Xie <shaohui.xie@freescale.com> CC: Andy Fleming <afleming@gmail.com> Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ben Dooks authored
The of_mdiobus_register_phy() is not setting phy->irq thus causing some drivers to incorrectly assume that the PHY does not have an IRQ associated with it. Not only do some drivers report no IRQ they do not install an interrupt handler for the PHY. Simplify the code setting irq and set the phy->irq at the same time so that we cover the following issues, which should cover all the cases the code will find: - Set phy->irq if node has irq property and mdio->irq is NULL - Set phy->irq if node has no irq and mdio->irq is not NULL - Leave phy->irq as PHY_POLL default if none of the above This fixes the issue: net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI to the correct: net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI Signed-off-by:
Ben Dooks <ben.dooks@codethink.co.uk> Signed-off-by:
-
Thomas Petazzoni authored
With the introduction of the support for Armada 375 and Armada 38x, the hidden Kconfig option MACH_ARMADA_370_XP is being renamed to MACH_MVEBU_V7. Therefore, the dependency that was used for the mvneta driver can no longer work. This commit replaces this dependency by a dependency on PLAT_ORION, which is used similarly for the mv643xx_eth driver. In addition to this, it takes this opportunity to adjust the description and help text to indicate that the driver can is also used for Armada 38x. Note that Armada 375 cannot use this driver as it has a completely different networking unit, which will require a separate driver. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Russell King authored
If napi is left enabled after a failed attempt to bring the interface up, we BUG: fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch libphy: PHY fixed-0:00 not found fec 2188000.ethernet eth0: could not attach to PHY ------------[ cut here ]------------ kernel BUG at include/linux/netdevice.h:502! Internal error: Oops - BUG: 0 [#1] SMP ARM ... PC is at fec_enet_open+0x4d0/0x500 LR is at __dev_open+0xa4/0xfc Only enable napi after we are past all the failure paths. Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Dan Carpenter authored
At first glance it looks like there is a missing curly brace but actually the code works the same either way. I have adjusted the indenting but left the code the same. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
git://people.freedesktop.org/~thomash/linuxDave Airlie authored
Pull request of 2014-02-18 One compile fix and one memory leak. * tag 'ttm-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux: drm/ttm: Fix memory leak in ttm_agp_backend.c drm/ttm: declare 'struct device' in ttm_page_alloc.h
-
Dave Airlie authored
Merge tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux into drm-fixes Pull request of 2014-02-18. Nothing special. The biggest change is adding a couple of command defines and packing the command data correctly. * tag 'vmwgfx-fixes-3.14-2014-02-18' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix command defines and checks drm/vmwgfx: Fix possible integer overflow drm/vmwgfx: Remove stray const drm/vmwgfx: unlock on error path in vmw_execbuf_process() drm/vmwgfx: Get maximum mob size from register SVGA_REG_MOB_MAX_SIZE drm/vmwgfx: Fix a couple of sparse warnings and errors
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fix for 128x128 cursors, along with some misc fixes. * 'drm-fixes-3.14' of git://people.freedesktop.org/~agd5f/linux: drm/radeon/ni: fix typo in dpm sq ramping setup drm/radeon/si: fix typo in dpm sq ramping setup drm/radeon: fix CP semaphores on CIK drm/radeon: delete a stray tab drm/radeon: fix display tiling setup on SI drm/radeon/dpm: reduce r7xx vblank mclk threshold to 200 drm/radeon: fill in DRM_CAPs for cursor size drm: add DRM_CAPs for cursor size drm/radeon: unify bpc handling
-
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirelessDavid S. Miller authored
John W. Linville says: ==================== Please pull this batch of fixes intended for the 3.14 stream... For the iwlwifi one, Emmanuel says: "As explicitly written in the commit message, we prefer to disable Tx AMPDU on NICs supported by iwldvm. This feature gives a big boost in Tx performance, but the firmware is buggy and we can't rely on it. Our hope is that most of the users out there want wifi to surf on the web which means that they care more for Rx traffic than for Tx. People who want to enable it can do so with the help of a module parameter." On top of that... Dan Carpenter fixes a typo/thinko in ath5k. Olivier Langlois fixes a couple of rtlwifi issues, one which leaves IRQs disabled too long (causing a variety of problems elsewhere), and one which fixes an incorrect return code when failing to enable the NIC. Russell King fixes a NULL pointer dereference in hostap. Stanislaw Gruszka fixes a DMA coherence issue in the rtl8187 driver. Please let me know if there are problems! ==================== Signed-off-by: -
Daniel Borkmann authored
SCTP's sctp_connectx() abi breaks for 64bit kernels compiled with 32bit emulation (e.g. ia32 emulation or x86_x32). Due to internal usage of 'struct sctp_getaddrs_old' which includes a struct sockaddr pointer, sizeof(param) check will always fail in kernel as the structure in 64bit kernel space is 4bytes larger than for user binaries compiled in 32bit mode. Thus, applications making use of sctp_connectx() won't be able to run under such circumstances. Introduce a compat interface in the kernel to deal with such situations by using a 'struct compat_sctp_getaddrs_old' structure where user data is copied into it, and then sucessively transformed into a 'struct sctp_getaddrs_old' structure with the help of compat_ptr(). That fixes sctp_connectx() abi without any changes needed in user space, and lets the SCTP test suite pass when compiled in 32bit and run on 64bit kernels. Fixes: f9c67811 ("sctp: Fix regression introduced by new sctp_connectx api") Signed-off-by:
Neil Horman <nhorman@tuxdriver.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Signed-off-by:
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Included changes: - fix soft-interface MTU computation - fix bogus pointer mangling when parsing the TT-TVLV container. This bug led to a wrong memory access. - fix memory leak by properly releasing the VLAN object after CRC check - properly check pskb_may_pull() return value - avoid potential race condition while adding new neighbour - fix potential memory leak by removing all the references to the orig_node object in case of initialization failure - fix the TT CRC computation by ensuring that every node uses the same byte order when hosts with different endianess are part of the same network - fix severe memory leak by freeing skb after a successful TVLV parsing - avoid potential double free when orig_node initialization fails - fix potential kernel paging error caused by the usage of the old value of skb->data after skb reallocation Signed-off-by: -
Alex Deucher authored
inverted logic. Signed-off-by:Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
Alex Deucher authored
inverted logic. Noticed-by:
Sylvain BERTRAND <sylware@legeek.net> Signed-off-by:
-
Christian König authored
The CP semaphore queue on CIK has a bug that triggers if uncompleted waits use the same address while a signal is still pending. Work around this by using different addresses for each sync. Signed-off-by:
Christian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Dan Carpenter authored
Static checkers complain that probably curly braces were intended here, but actually it makes more sense to remove the extra tab. Signed-off-by:
-
Alex Deucher authored
Apply the same logic as CI to SI for setting up the display tiling parameters. The num banks may vary per tiling index just like CI. Bugs: https://bugs.freedesktop.org/show_bug.cgi?id=71488 https://bugs.freedesktop.org/show_bug.cgi?id=73946 https://bugs.freedesktop.org/show_bug.cgi?id=74927Signed-off-by:
-
Alex Deucher authored
Most laptops seems to have a vblank period of less than 300 and mclk switching works fine. Drop the quirk and set the default threshold to 200. bug: https://bugzilla.kernel.org/show_bug.cgi?id=70701Signed-off-by:
-
Alex Deucher authored
CIK parts are 128x128, older parts are 64x64. Signed-off-by: -
Alex Deucher authored
Some hardware may not support standard 64x64 cursors. Add a drm cap to query the cursor size from the kernel. Some examples include radeon CIK parts (128x128 cursors) and armada (32x64 or 64x32). This allows things like device specific ddxes to remove asics specific logic and also allows xf86-video-modesetting to work properly with hw cursors on this hardware. Default to 64 if the driver doesn't specify a size. Signed-off-by:
Rob Clark <robdclark@gmail.com>
-
Alex Deucher authored
We were already storing the bpc (bits per color) information in radeon_crtc, so just use that everywhere rather than calculating it everywhere we use it. This also allows us to change it in one place if we ever want to override it. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Miscellaneous ext4 bug fixes for v3.14" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: jbd2: fix use after free in jbd2_journal_start_reserved() ext4: don't leave i_crtime.tv_sec uninitialized ext4: fix online resize with a non-standard blocks per group setting ext4: fix online resize with very large inode tables ext4: don't try to modify s_flags if the the file system is read-only ext4: fix error paths in swap_inode_boot_loader() ext4: fix xfstest generic/299 block validity failures
-
Masanari Iida authored
This patch fix a memory leak found by cppcheck. [drivers/gpu/drm/ttm/ttm_agp_backend.c:129]: (error) Memory leak: agp_be Signed-off-by:
Masanari Iida <standby24x7@gmail.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com>
-
Alexandre Courbot authored
Declare 'struct device' explicitly in ttm_page_alloc.h as this file does not include any file declaring it. This removes the following warning: warning: 'struct device' declared inside parameter list Signed-off-by:
Alexandre Courbot <acourbot@nvidia.com> Reviewed-by:
Thierry Reding <treding@nvidia.com>
-
Dave Airlie authored
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes Nothing too exciting, mostly fixes for ancient boards, but a pretty important fix for DP on some systems. Thanks, * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: fix TTM_PL_TT memtype on pre-nv50 drm/nv50/disp: use correct register to determine DP display bpp drm/nouveau/fb: use correct ram oclass for nv1a hardware drm/nv50/gr: add missing nv_error parameter priv drm/nouveau: fix ENG_RUNLIST register address drm/nv4c/bios: disallow retrieving from prom on nv4x igp's drm/nv4c/vga: decode register is in a different place on nv4x igp's drm/nv4c/mc: nv4x igp's have a different msi rearm register drm/nouveau: set irq_enabled manually
-
