- 29 Jan, 2024 3 commits
-
-
Eric Dumazet authored
TCP rx zerocopy intent is to map pages initially allocated from NIC drivers, not pages owned by a fs. This patch adds to can_map_frag() these additional checks: - Page must not be a compound one. - page->mapping must be NULL. This fixes the panic reported by ZhangPeng. syzbot was able to loopback packets built with sendfile(), mapping pages owned by an ext4 file to TCP rx zerocopy. r3 = socket$inet_tcp(0x2, 0x1, 0x0) mmap(&(0x7f0000ff9000/0x4000)=nil, 0x4000, 0x0, 0x12, r3, 0x0) r4 = socket$inet_tcp(0x2, 0x1, 0x0) bind$inet(r4, &(0x7f0000000000)={0x2, 0x4e24, @multicast1}, 0x10) connect$inet(r4, &(0x7f00000006c0)={0x2, 0x4e24, @empty}, 0x10) r5 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) fallocate(r5, 0x0, 0x0, 0x85b8) sendfile(r4, r5, 0x0, 0x8ba0) getsockopt$inet_tcp_TCP_ZEROCOPY_RECEIVE(r4, 0x6, 0x23, &(0x7f00000001c0)={&(0x7f0000ffb000/0x3000)=nil, 0x3000, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, &(0x7f0000000440)=0x40) r6 = openat$dir(0xffffffffffffff9c, &(0x7f00000000c0)='./file0\x00', 0x181e42, 0x0) Fixes: 93ab6cc6 ("tcp: implement mmap() for zero copy receive") Link: https://lore.kernel.org/netdev/5106a58e-04da-372a-b836-9d3d0bd2507b@huawei.com/T/Reported-and-bisected-by:ZhangPeng <zhangpeng362@huawei.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Arjun Roy <arjunroy@google.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: linux-mm@vger.kernel.org Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-fsdevel@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fedor Pchelkin authored
rx_data_reassembly skb is stored during NCI data exchange for processing fragmented packets. It is dropped only when the last fragment is processed or when an NTF packet with NCI_OP_RF_DEACTIVATE_NTF opcode is received. However, the NCI device may be deallocated before that which leads to skb leak. As by design the rx_data_reassembly skb is bound to the NCI device and nothing prevents the device to be freed before the skb is processed in some way and cleaned, free it on the NCI device cleanup. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. Fixes: 6a2968aa ("NFC: basic NCI protocol implementation") Cc: stable@vger.kernel.org Reported-by: syzbot+6b7c68d9c21e4ee4251b@syzkaller.appspotmail.com Closes: https://lore.kernel.org/lkml/000000000000f43987060043da7b@google.com/Signed-off-by:
Fedor Pchelkin <pchelkin@ispras.ru> Signed-off-by:
-
Nikita Zhandarovich authored
Syzkaller reported [1] hitting a warning after failing to allocate resources for skb in hsr_init_skb(). Since a WARN_ONCE() call will not help much in this case, it might be prudent to switch to netdev_warn_once(). At the very least it will suppress syzkaller reports such as [1]. Just in case, use netdev_warn_once() in send_prp_supervision_frame() for similar reasons. [1] HSR: Could not send supervision frame WARNING: CPU: 1 PID: 85 at net/hsr/hsr_device.c:294 send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 RIP: 0010:send_hsr_supervision_frame+0x60a/0x810 net/hsr/hsr_device.c:294 ... Call Trace: <IRQ> hsr_announce+0x114/0x370 net/hsr/hsr_device.c:382 call_timer_fn+0x193/0x590 kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x764/0xb20 kernel/time/timer.c:2022 run_timer_softirq+0x58/0xd0 kernel/time/timer.c:2035 __do_softirq+0x21a/0x8de kernel/softirq.c:553 invoke_softirq kernel/softirq.c:427 [inline] __irq_exit_rcu kernel/softirq.c:632 [inline] irq_exit_rcu+0xb7/0x120 kernel/softirq.c:644 sysvec_apic_timer_interrupt+0x95/0xb0 arch/x86/kernel/apic/apic.c:1076 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:649 ... This issue is also found in older kernels (at least up to 5.10). Cc: stable@vger.kernel.org Reported-by: syzbot+3ae0a3f42c84074b7c8e@syzkaller.appspotmail.com Fixes: 121c33b0 ("net: hsr: introduce common code for skb initialization") Signed-off-by:
Nikita Zhandarovich <n.zhandarovich@fintech.ru> Signed-off-by:
-
- 27 Jan, 2024 3 commits
-
-
Horatiu Vultur authored
In case the interface between the MAC and the PHY is SGMII, then the bit GIGA_MODE on the MAC side needs to be set regardless of the speed at which it is running. Fixes: d28d6d2e ("net: lan966x: add port module support") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Simon Horman authored
Commit 46cf789b ("connector: Move maintainence under networking drivers umbrella.") moved the connector maintenance but did not include the connector header files. It seems that it has always been implied that these headers were maintained along with the rest of the connector code, both before and after the cited commit. Make this explicit. Signed-off-by:
Simon Horman <horms@kernel.org> Signed-off-by:
-
Nicolas Dichtel authored
The stacktrace was: [ 86.305548] BUG: kernel NULL pointer dereference, address: 0000000000000092 [ 86.306815] #PF: supervisor read access in kernel mode [ 86.307717] #PF: error_code(0x0000) - not-present page [ 86.308624] PGD 0 P4D 0 [ 86.309091] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 86.309883] CPU: 2 PID: 3139 Comm: pimd Tainted: G U 6.8.0-6wind-knet #1 [ 86.311027] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.1-0-g0551a4be2c-prebuilt.qemu-project.org 04/01/2014 [ 86.312728] RIP: 0010:ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.313399] Code: f9 1f 0f 87 85 03 00 00 48 8d 04 5b 48 8d 04 83 49 8d 44 c5 00 48 8b 40 70 48 39 c2 0f 84 d9 00 00 00 49 8b 46 58 48 83 e0 fe <80> b8 92 00 00 00 00 0f 84 55 ff ff ff 49 83 47 38 01 45 85 e4 0f [ 86.316565] RSP: 0018:ffffad21c0583ae0 EFLAGS: 00010246 [ 86.317497] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 86.318596] RDX: ffff9559cb46c000 RSI: 0000000000000000 RDI: 0000000000000000 [ 86.319627] RBP: ffffad21c0583b30 R08: 0000000000000000 R09: 0000000000000000 [ 86.320650] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000001 [ 86.321672] R13: ffff9559c093a000 R14: ffff9559cc00b800 R15: ffff9559c09c1d80 [ 86.322873] FS: 00007f85db661980(0000) GS:ffff955a79d00000(0000) knlGS:0000000000000000 [ 86.324291] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 86.325314] CR2: 0000000000000092 CR3: 000000002f13a000 CR4: 0000000000350ef0 [ 86.326589] Call Trace: [ 86.327036] <TASK> [ 86.327434] ? show_regs (/build/work/knet/arch/x86/kernel/dumpstack.c:479) [ 86.328049] ? __die (/build/work/knet/arch/x86/kernel/dumpstack.c:421 /build/work/knet/arch/x86/kernel/dumpstack.c:434) [ 86.328508] ? page_fault_oops (/build/work/knet/arch/x86/mm/fault.c:707) [ 86.329107] ? do_user_addr_fault (/build/work/knet/arch/x86/mm/fault.c:1264) [ 86.329756] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.330350] ? __irq_work_queue_local (/build/work/knet/kernel/irq_work.c:111 (discriminator 1)) [ 86.331013] ? exc_page_fault (/build/work/knet/./arch/x86/include/asm/paravirt.h:693 /build/work/knet/arch/x86/mm/fault.c:1515 /build/work/knet/arch/x86/mm/fault.c:1563) [ 86.331702] ? asm_exc_page_fault (/build/work/knet/./arch/x86/include/asm/idtentry.h:570) [ 86.332468] ? ip_mr_forward (/build/work/knet/net/ipv4/ipmr.c:1985) [ 86.333183] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.333920] ipmr_mfc_add (/build/work/knet/./include/linux/rcupdate.h:782 /build/work/knet/net/ipv4/ipmr.c:1009 /build/work/knet/net/ipv4/ipmr.c:1273) [ 86.334583] ? __pfx_ipmr_hash_cmp (/build/work/knet/net/ipv4/ipmr.c:363) [ 86.335357] ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.336135] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.336854] ? ip_mroute_setsockopt (/build/work/knet/net/ipv4/ipmr.c:1470) [ 86.337679] do_ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:944) [ 86.338408] ? __pfx_unix_stream_read_actor (/build/work/knet/net/unix/af_unix.c:2862) [ 86.339232] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.339809] ? aa_sk_perm (/build/work/knet/security/apparmor/include/cred.h:153 /build/work/knet/security/apparmor/net.c:181) [ 86.340342] ip_setsockopt (/build/work/knet/net/ipv4/ip_sockglue.c:1415) [ 86.340859] raw_setsockopt (/build/work/knet/net/ipv4/raw.c:836) [ 86.341408] ? security_socket_setsockopt (/build/work/knet/security/security.c:4561 (discriminator 13)) [ 86.342116] sock_common_setsockopt (/build/work/knet/net/core/sock.c:3716) [ 86.342747] do_sock_setsockopt (/build/work/knet/net/socket.c:2313) [ 86.343363] __sys_setsockopt (/build/work/knet/./include/linux/file.h:32 /build/work/knet/net/socket.c:2336) [ 86.344020] __x64_sys_setsockopt (/build/work/knet/net/socket.c:2340) [ 86.344766] do_syscall_64 (/build/work/knet/arch/x86/entry/common.c:52 /build/work/knet/arch/x86/entry/common.c:83) [ 86.345433] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.346161] ? syscall_exit_work (/build/work/knet/./include/linux/audit.h:357 /build/work/knet/kernel/entry/common.c:160) [ 86.346938] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.347657] ? syscall_exit_to_user_mode (/build/work/knet/kernel/entry/common.c:215) [ 86.348538] ? srso_return_thunk (/build/work/knet/arch/x86/lib/retpoline.S:223) [ 86.349262] ? do_syscall_64 (/build/work/knet/./arch/x86/include/asm/cpufeature.h:171 /build/work/knet/arch/x86/entry/common.c:98) [ 86.349971] entry_SYSCALL_64_after_hwframe (/build/work/knet/arch/x86/entry/entry_64.S:129) The original packet in ipmr_cache_report() may be queued and then forwarded with ip_mr_forward(). This last function has the assumption that the skb dst is set. After the below commit, the skb dst is dropped by ipv4_pktinfo_prepare(), which causes the oops. Fixes: bb740365 ("ipmr: support IP_PKTINFO on cache report IGMP msg") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org>
-
- 26 Jan, 2024 15 commits
-
-
Daniel Golle authored
Setup PMCR port register for actual speed and duplex on internally connected PHYs of the MT7988 built-in switch. This fixes links with speeds other than 1000M. Fixes: 110c18bf ("net: dsa: mt7530: introduce driver for MT7988 built-in switch") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Acked-by:
Arınç ÜNAL <arinc.unal@arinc9.com> Link: https://lore.kernel.org/r/a5b04dfa8256d8302f402545a51ac4c626fdba25.1706071272.git.daniel@makrotopia.orgSigned-off-by:
-
Eric Dumazet authored
syzbot found __ip6_tnl_rcv() could access unitiliazed data [1]. Call pskb_inet_may_pull() to fix this, and initialize ipv6h variable after this call as it can change skb->head. [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727 __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845 ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888 gre_rcv+0x143f/0x1870 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: 0d3c703a ("ipv6: Cleanup IPv6 tunnel receive path") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Paolo Abeni authored
The gro.sh test-case relay on the gro_flush_timeout to ensure that all the segments belonging to any given batch are properly aggregated. The other end, the sender is a user-space program transmitting each packet with a separate write syscall. A busy host and/or stracing the sender program can make the relevant segments reach the GRO engine after the flush timeout triggers. Give the GRO flush timeout more slack, to avoid sporadic self-tests failures. Fixes: 9af771d2 ("selftests/net: allow GRO coalesce test on veth") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
-
Paolo Abeni authored
the udpgro_fraglist self-test uses the BPF classifiers, but the current net self-test configuration does not include it, causing CI failures: # selftests: net: udpgro_frglist.sh # ipv6 # tcp - over veth touching data # -l 4 -6 -D 2001:db8::1 -t rx -4 -t # Error: TC classifier not found. # We have an error talking to the kernel # Error: TC classifier not found. # We have an error talking to the kernel Add the missing knob. Fixes: edae34a3 ("selftests net: add UDP GRO fraglist + bpf self-tests") Signed-off-by:
Maciej Żenczykowski <maze@google.com> Reviewed-by:
-
Breno Leitao authored
commit 056bce63 ("bnxt_en: Make PTP TX timestamp HWRM query silent") changed a netdev_err() to netdev_WARN_ONCE(). netdev_WARN_ONCE() is it generates a kernel WARNING, which is bad, for the following reasons: * You do not a kernel warning if the firmware queries are late * In busy networks, timestamp query failures fairly regularly * A WARNING message doesn't bring much value, since the code path is clear. (This was discussed in-depth in [1]) Transform the netdev_WARN_ONCE() into a netdev_warn_once(), and print a more well-behaved message, instead of a full WARN(). bnxt_en 0000:67:00.0 eth0: TS query for TX timer failed rc = fffffff5 [1] Link: https://lore.kernel.org/all/ZbDj%2FFI4EJezcfd1@gmail.com/Signed-off-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Fixes: 056bce63 ("bnxt_en: Make PTP TX timestamp HWRM query silent") Link: https://lore.kernel.org/r/20240125134104.2045573-1-leitao@debian.orgSigned-off-by:
-
Wen Gu authored
The logic to determine if SMC-D link group matches is incorrect. The correct logic should be that it only returns true when the GID is the same, and the SMC-D device is the same and the extended GID is the same (in the case of virtual ISM). It can be fixed by adding brackets around the conditional (or ternary) operator expression. But for better readability and maintainability, it has been changed to an if-else statement. Reported-by:
Matthew Rosato <mjrosato@linux.ibm.com> Closes: https://lore.kernel.org/r/13579588-eb9d-4626-a063-c0b77ed80f11@linux.ibm.com Fixes: b40584d1 ("net/smc: compatible with 128-bits extended GID of virtual ISM device") Link: https://lore.kernel.org/r/13579588-eb9d-4626-a063-c0b77ed80f11@linux.ibm.comSigned-off-by:
Wen Gu <guwen@linux.alibaba.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Link: https://lore.kernel.org/r/20240125123916.77928-1-guwen@linux.alibaba.comSigned-off-by:
-
Paolo Abeni authored
The big_tcp test-case requires a few kernel knobs currently not specified in the net selftests config, causing the following failure: # selftests: net: big_tcp.sh # Error: Failed to load TC action module. # We have an error talking to the kernel ... # Testing for BIG TCP: # CLI GSO | GW GRO | GW GSO | SER GRO # ./big_tcp.sh: line 107: test: !=: unary operator expected ... # on on on on : [FAIL_on_link1] Add the missing configs Fixes: 6bb382bc ("selftests: add a selftest for big tcp") Signed-off-by:
Aaron Conole <aconole@redhat.com> Acked-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/all/21630ecea872fea13f071342ac64ef52a991a9b5.1706282943.git.pabeni@redhat.com/Signed-off-by:
-
Daniel Golle authored
Sync initialization and calibration routines with MediaTek's reference driver. Improves compliance and resolves link stability issues with CH340 IoT devices connected to MT798x built-in PHYs. Fixes: 98c485ea ("net: phy: add driver for MediaTek SoC built-in GE PHYs") Signed-off-by:
-
Daniel Golle authored
Set DMA coherent mask to 32-bit which makes PPE offloading engine start working on BPi-R4 which got 4 GiB of RAM. Fixes: 2d75891e ("net: ethernet: mtk_eth_soc: support 36-bit DMA addressing on MT7988") Suggested-by:
Elad Yifee <eladwf@users.github.com> Signed-off-by:
-
Jakub Kicinski authored
Louis Peens says: ==================== nfp: flower: a few small conntrack offload fixes This small series addresses two bugs in the nfp conntrack offloading code. The first patch is a check to prevent offloading for a case which is currently not supported by the nfp. The second patch fixes up parsing of layer4 mangling code so it can be correctly offloaded. Since the masks are an inverse mask and we are shifting it so it can be packed together with the destination we effectively need to 'clear' the lower bits of the mask by setting it to 0xFFFF. ==================== Link: https://lore.kernel.org/r/20240124151909.31603-1-louis.peens@corigine.comSigned-off-by:
-
Hui Zhou authored
The nfp driver will merge the tp source port and tp destination port into one dword which the offset must be zero to do hardware offload. However, the mangle action for the tp source port and tp destination port is separated for tc ct action. Modify the mangle action for the FLOW_ACT_MANGLE_HDR_TYPE_TCP and FLOW_ACT_MANGLE_HDR_TYPE_UDP to satisfy the nfp driver offload check for the tp port. The mangle action provides a 4B value for source, and a 4B value for the destination, but only 2B of each contains the useful information. For offload the 2B of each is combined into a single 4B word. Since the incoming mask for the source is '0xFFFF<mask>' the shift-left will throw away the 0xFFFF part. When this gets combined together in the offload it will clear the destination field. Fix this by setting the lower bits back to 0xFFFF, effectively doing a rotate-left operation on the mask. Fixes: 5cee92c6 ("nfp: flower: support hw offload for ct nat action") CC: stable@vger.kernel.org # 6.1+ Signed-off-by:
Hui Zhou <hui.zhou@corigine.com> Signed-off-by:
Louis Peens <louis.peens@corigine.com> Link: https://lore.kernel.org/r/20240124151909.31603-3-louis.peens@corigine.comSigned-off-by:
-
Hui Zhou authored
The nfp offload flow pay will not allocate a mask id when the out port is openvswitch internal port. This is because these flows are used to configure the pre_tun table and are never actually send to the firmware as an add-flow message. When a tc rule which action contains ct and the post ct entry's out port is openvswitch internal port, the merge offload flow pay with the wrong mask id of 0 will be send to the firmware. Actually, the nfp can not support hardware offload for this situation, so return EOPNOTSUPP. Fixes: bd0fe7f9 ("nfp: flower-ct: add zone table entry when handling pre/post_ct flows") CC: stable@vger.kernel.org # 5.14+ Signed-off-by:
-
Praveen Kaligineedi authored
For a skb frag with a newly allocated copy page, the true size is incorrectly set to packet buffer size. It should be set to PAGE_SIZE instead. Fixes: 82fd151d ("gve: Reduce alloc and copy costs in the GQ rx path") Signed-off-by:
Praveen Kaligineedi <pkaligineedi@google.com> Link: https://lore.kernel.org/r/20240124161025.1819836-1-pkaligineedi@google.comSigned-off-by:
-
Hangbin Liu authored
The busywait timeout value is a millisecond, not a second. So the current setting 2 is too small. On slow/busy host (or VMs) the current timeout can expire even on "correct" execution, causing random failures. Let's copy the WAIT_TIMEOUT from forwarding/lib.sh and set BUSYWAIT_TIMEOUT here. Fixes: 25ae948b ("selftests/net: add lib.sh") Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Reviewed-by:
-
Jakub Kicinski authored
The default timeout for tests is 45sec, bench-lookups_ipv6 seems to take around 50sec when running in a VM without HW acceleration. Give it a 2x margin and set the timeout to 120sec. Fixes: d1066c9c ("selftests/net: Add test/benchmark for removing MKTs") Reviewed-by:
Dmitry Safonov <0x7f454c46@gmail.com> Link: https://lore.kernel.org/r/20240124233630.1977708-1-kuba@kernel.orgSigned-off-by:
-
- 25 Jan, 2024 19 commits
-
-
Jakub Kicinski authored
Paolo Abeni says: ==================== selftests: net: a few fixes This series address self-tests failures for udp gro-related tests. The first patch addresses the main problem I observe locally - the XDP program required by such tests, xdp_dummy, is currently build in the ebpf self-tests directory, not available if/when the user targets net only. Arguably is more a refactor than a fix, but still targeting net to hopefully The second patch fixes the integration of such tests with the build system. Patch 3/3 fixes sporadic failures due to races. Tested with: make -C tools/testing/selftests/ TARGETS=net install ./tools/testing/selftests/kselftest_install/run_kselftest.sh \ -t "net:udpgro_bench.sh net:udpgro.sh net:udpgro_fwd.sh \ net:udpgro_frglist.sh net:veth.sh" no failures. ==================== Link: https://lore.kernel.org/r/cover.1706131762.git.pabeni@redhat.comSigned-off-by:
-
Paolo Abeni authored
The UDP GRO forwarding test still hard-code an arbitrary pause to wait for the UDP listener becoming ready in background. That causes sporadic failures depending on the host load. Replace the sleep with the existing helper waiting for the desired port being exposed. Fixes: a062260a ("selftests: net: add UDP GRO forwarding self-tests") Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/4d58900fb09cef42749cfcf2ad7f4b91a97d225c.1706131762.git.pabeni@redhat.comSigned-off-by:
-
Paolo Abeni authored
The blamed commit below introduce a dependency in some net self-tests towards a newly introduce helper script. Such script is currently not included into the TEST_PROGS_EXTENDED list and thus is not installed, causing failure for the relevant tests when executed from the install dir. Fix the issue updating the install targets. Fixes: 3bdd9fd2 ("selftests/net: synchronize udpgro tests' tx and rx connection") Signed-off-by:
-
Paolo Abeni authored
Several net tests requires an XDP program build under the ebpf directory, and error out if such program is not available. That makes running successful net test hard, let's duplicate into the net dir the [very small] program, re-using the existing rules to build it, and finally dropping the bogus dependency. Signed-off-by:
-
Jakub Kicinski authored
Still a bit unclear whether each directory should have its own config file, but assuming they should lets add one for tcp_ao. The following tests still fail with this config in place: - rst_ipv4, - rst_ipv6, - bench-lookups_ipv6. other 21 pass. Fixes: d11301f6 ("selftests/net: Add TCP-AO ICMPs accept test") Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf, netfilter and WiFi. Jakub is doing a lot of work to include the self-tests in our CI, as a result a significant amount of self-tests related fixes is flowing in (and will likely continue in the next few weeks). Current release - regressions: - bpf: fix a kernel crash for the riscv 64 JIT - bnxt_en: fix memory leak in bnxt_hwrm_get_rings() - revert "net: macsec: use skb_ensure_writable_head_tail to expand the skb" Previous releases - regressions: - core: fix removing a namespace with conflicting altnames - tc/flower: fix chain template offload memory leak - tcp: - make sure init the accept_queue's spinlocks once - fix autocork on CPUs with weak memory model - udp: fix busy polling - mlx5e: - fix out-of-bound read in port timestamping - fix peer flow lists corruption - iwlwifi: fix a memory corruption Previous releases - always broken: - netfilter: - nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain - nft_limit: reject configurations that cause integer overflow - bpf: fix bpf_xdp_adjust_tail() with XSK zero-copy mbuf, avoiding a NULL pointer dereference upon shrinking - llc: make llc_ui_sendmsg() more robust against bonding changes - smc: fix illegal rmb_desc access in SMC-D connection dump - dpll: fix pin dump crash for rebound module - bnxt_en: fix possible crash after creating sw mqprio TCs - hv_netvsc: calculate correct ring size when PAGE_SIZE is not 4kB Misc: - several self-tests fixes for better integration with the netdev CI - added several missing modules descriptions" * tag 'net-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (88 commits) tsnep: Fix XDP_RING_NEED_WAKEUP for empty fill ring tsnep: Remove FCS for XDP data path net: fec: fix the unhandled context fault from smmu selftests: bonding: do not test arp/ns target with mode balance-alb/tlb fjes: fix memleaks in fjes_hw_setup i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full net: fill in MODULE_DESCRIPTION()s for rvu_mbox net: fill in MODULE_DESCRIPTION()s for litex net: fill in MODULE_DESCRIPTION()s for fsl_pq_mdio net: fill in MODULE_DESCRIPTION()s for fec ... -
git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfsLinus Torvalds authored
Pull overlayfs fix from Amir Goldstein: "Change the on-disk format for the new "xwhiteouts" feature introduced in v6.7 The change reduces unneeded overhead of an extra getxattr per readdir. The only user of the "xwhiteout" feature is the external composefs tool, which has been updated to support the new on-disk format. This change is also designated for 6.7.y" * tag 'ovl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/overlayfs/vfs: ovl: mark xwhiteouts directory with overlay.opaque='x'
-
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfsLinus Torvalds authored
Pull netfs fixes from Christian Brauner: "This contains various fixes for the netfs work merged earlier this cycle: afs: - Fix locking imbalance in afs_proc_addr_prefs_show() - Remove afs_dynroot_d_revalidate() which is redundant - Fix error handling during lookup - Hide sillyrenames from userspace. This fixes a race between silly-rename files being created/removed and userspace iterating over directory entries - Don't use unnecessary folio_*() functions cifs: - Don't use unnecessary folio_*() functions cachefiles: - erofs: Fix Null dereference when cachefiles are not doing ondemand-mode - Update mailing list netfs library: - Add Jeff Layton as reviewer - Update mailing list - Fix a error checking in netfs_perform_write() - fscache: Check error before dereferencing - Don't use unnecessary folio_*() functions" * tag 'vfs-6.8-rc2.netfs' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: afs: Fix missing/incorrect unlocking of RCU read lock afs: Remove afs_dynroot_d_revalidate() as it is redundant afs: Fix error handling with lookup via FS.InlineBulkStatus afs: Hide silly-rename files from userspace cachefiles, erofs: Fix NULL deref in when cachefiles is not doing ondemand-mode netfs: Fix a NULL vs IS_ERR() check in netfs_perform_write() netfs, fscache: Prevent Oops in fscache_put_cache() cifs: Don't use certain unnecessary folio_*() functions afs: Don't use certain unnecessary folio_*() functions netfs: Don't use certain unnecessary folio_*() functions netfs: Add Jeff Layton as reviewer netfs, cachefiles: Change mailing list -
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linuxLinus Torvalds authored
Pull nfsd fixes from Chuck Lever: - Fix in-kernel RPC UDP transport - Fix NFSv4.0 RELEASE_LOCKOWNER * tag 'nfsd-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: nfsd: fix RELEASE_LOCKOWNER SUNRPC: use request size to initialize bio_vec in svc_udp_sendto()
-
https://github.com/neeraju/linuxLinus Torvalds authored
Pull RCU fix from Neeraj Upadhyay: "This fixes RCU grace period stalls, which are observed when an outgoing CPU's quiescent state reporting results in wakeup of one of the grace period kthreads, to complete the grace period. If those kthreads have SCHED_FIFO policy, the wake up can indirectly arm the RT bandwith timer to the local offline CPU. Earlier migration of the hrtimers from the CPU introduced in commit 5c0930cc ("hrtimers: Push pending hrtimers away from outgoing CPU earlier") results in this timer getting ignored. If the RCU grace period kthreads are waiting for RT bandwidth to be available, they may never be actually scheduled, resulting in RCU stall warnings" * tag 'urgent-rcu.2024.01.24a' of https://github.com/neeraju/linux: rcu: Defer RCU kthreads wakeup when CPU is dying
-
Paolo Abeni authored
Gerhard Engleder says: ==================== tsnep: XDP fixes Found two driver specific problems during XDP and XSK testing. ==================== Link: https://lore.kernel.org/r/20240123200918.61219-1-gerhard@engleder-embedded.comSigned-off-by:
-
Gerhard Engleder authored
The fill ring of the XDP socket may contain not enough buffers to completey fill the RX queue during socket creation. In this case the flag XDP_RING_NEED_WAKEUP is not set as this flag is only set if the RX queue is not completely filled during polling. Set XDP_RING_NEED_WAKEUP flag also if RX queue is not completely filled during XDP socket creation. Fixes: 3fc23339 ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Signed-off-by:
-
Gerhard Engleder authored
The RX data buffer includes the FCS. The FCS is already stripped for the normal data path. But for the XDP data path the FCS is included and acts like additional/useless data. Remove the FCS from the RX data buffer also for XDP. Fixes: 65b28c81 ("tsnep: Add XDP RX support") Fixes: 3fc23339 ("tsnep: Add XDP socket zero-copy RX support") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxPaolo Abeni authored
Saeed Mahameed says: ==================== mlx5 fixes 2024-01-24 This series provides bug fixes to mlx5 driver. Please pull and let me know if there is any problem. * tag 'mlx5-fixes-2024-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5e: fix a potential double-free in fs_any_create_groups net/mlx5e: fix a double-free in arfs_create_groups net/mlx5e: Ignore IPsec replay window values on sender side net/mlx5e: Allow software parsing when IPsec crypto is enabled net/mlx5: Use mlx5 device constant for selecting CQ period mode for ASO net/mlx5: DR, Can't go to uplink vport on RX rule net/mlx5: DR, Use the right GVMI number for drop action net/mlx5: Bridge, fix multicast packets sent to uplink net/mlx5: Fix a WARN upon a callback command failure net/mlx5e: Fix peer flow lists handling net/mlx5e: Fix inconsistent hairpin RQT sizes net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context net/mlx5: Fix query of sd_group field net/mlx5e: Use the correct lag ports number when creating TISes ==================== Link: https://lore.kernel.org/r/20240124081855.115410-1-saeed@kernel.orgSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfPaolo Abeni authored
Daniel Borkmann says: ==================== pull-request: bpf 2024-01-25 The following pull-request contains BPF updates for your *net* tree. We've added 12 non-merge commits during the last 2 day(s) which contain a total of 13 files changed, 190 insertions(+), 91 deletions(-). The main changes are: 1) Fix bpf_xdp_adjust_tail() in context of XSK zero-copy drivers which support XDP multi-buffer. The former triggered a NULL pointer dereference upon shrinking, from Maciej Fijalkowski & Tirthendu Sarkar. 2) Fix a bug in riscv64 BPF JIT which emitted a wrong prologue and epilogue for struct_ops programs, from Pu Lehui. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: i40e: update xdp_rxq_info::frag_size for ZC enabled Rx queue i40e: set xdp_rxq_info::frag_size xdp: reflect tail increase for MEM_TYPE_XSK_BUFF_POOL ice: update xdp_rxq_info::frag_size for ZC enabled Rx queue intel: xsk: initialize skb_frag_t::bv_offset in ZC drivers ice: remove redundant xdp_rxq_info registration i40e: handle multi-buffer packets that are shrunk by xdp prog ice: work on pre-XDP prog frag count xsk: fix usage of multi-buffer BPF helpers for ZC XDP xsk: make xsk_buff_pool responsible for clearing xdp_buff::flags xsk: recycle buffer in case Rx queue was full riscv, bpf: Fix unpredictable kernel crash about RV64 struct_ops ==================== Link: https://lore.kernel.org/r/20240125084416.10876-1-daniel@iogearbox.netSigned-off-by:
-
Shenwei Wang authored
When repeatedly changing the interface link speed using the command below: ethtool -s eth0 speed 100 duplex full ethtool -s eth0 speed 1000 duplex full The following errors may sometimes be reported by the ARM SMMU driver: [ 5395.035364] fec 5b040000.ethernet eth0: Link is Down [ 5395.039255] arm-smmu 51400000.iommu: Unhandled context fault: fsr=0x402, iova=0x00000000, fsynr=0x100001, cbfrsynra=0x852, cb=2 [ 5398.108460] fec 5b040000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off It is identified that the FEC driver does not properly stop the TX queue during the link speed transitions, and this results in the invalid virtual I/O address translations from the SMMU and causes the context faults. Fixes: dbc64a8e ("net: fec: move calls to quiesce/resume packet processing out of fec_restart()") Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20240123165141.2008104-1-shenwei.wang@nxp.comSigned-off-by:
-
Hangbin Liu authored
The prio_arp/ns tests hard code the mode to active-backup. At the same time, The balance-alb/tlb modes do not support arp/ns target. So remove the prio_arp/ns tests from the loop and only test active-backup mode. Fixes: 481b56e0 ("selftests: bonding: re-format bond option tests") Reported-by:
Jay Vosburgh <jay.vosburgh@canonical.com> Closes: https://lore.kernel.org/netdev/17415.1705965957@famine/Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Update nf_tables kdoc to keep it in sync with the code, from George Guo. 2) Handle NETDEV_UNREGISTER event for inet/ingress basechain. 3) Reject configuration that cause nft_limit to overflow, from Florian Westphal. 4) Restrict anonymous set/map names to 16 bytes, from Florian Westphal. 5) Disallow to encode queue number and error in verdicts. This reverts a patch which seems to have introduced an early attempt to support for nfqueue maps, which is these days supported via nft_queue expression. 6) Sanitize family via .validate for expressions that explicitly refer to NF_INET_* hooks. * tag 'nf-24-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: validate NFPROTO_* family netfilter: nf_tables: reject QUEUE/DROP verdict parameters netfilter: nf_tables: restrict anonymous set and map names to 16 bytes netfilter: nft_limit: reject configurations that cause integer overflow netfilter: nft_chain_filter: handle NETDEV_UNREGISTER for inet/ingress basechain netfilter: nf_tables: cleanup documentation ==================== Link: https://lore.kernel.org/r/20240124191248.75463-1-pablo@netfilter.orgSigned-off-by:
-
Zhipeng Lu authored
In fjes_hw_setup, it allocates several memory and delay the deallocation to the fjes_hw_exit in fjes_probe through the following call chain: fjes_probe |-> fjes_hw_init |-> fjes_hw_setup |-> fjes_hw_exit However, when fjes_hw_setup fails, fjes_hw_exit won't be called and thus all the resources allocated in fjes_hw_setup will be leaked. In this patch, we free those resources in fjes_hw_setup and prevents such leaks. Fixes: 2fcbca68 ("fjes: platform_driver's .probe and .remove routine") Signed-off-by:Zhipeng Lu <alexious@zju.edu.cn> Reviewed-by:
-
