When receiving a robust management frame, drop it if we don't have
rx->sta since then we don't have a security association and thus
couldn't possibly validate the frame.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

For old commands, it's fine to have .type = NLA_UNSPEC and it
behaves the same as NLA_MIN_LEN. However, for new commands with
strict validation this is no longer true, and for policy export
to userspace these are also ignored.

Fix up the remaining ones that don't have a type.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

freeing peer keys after vif down is resulting in peer key uninstall
to fail due to interface lookup failure. so fix that.
Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ifmsh->csa is an RCU-protected pointer. The writer context
in ieee80211_mesh_finish_csa() is already mutually
exclusive with wdev->sdata.mtx, but the RCU checker did
not know this. Use rcu_dereference_protected() to avoid a
warning.

fixes the following warning:

[   12.519089] =============================
[   12.520042] WARNING: suspicious RCU usage
[   12.520652] 5.1.0-rc7-wt+ #16 Tainted: G        W
[   12.521409] -----------------------------
[   12.521972] net/mac80211/mesh.c:1223 suspicious rcu_dereference_check() usage!
[   12.522928] other info that might help us debug this:
[   12.523984] rcu_scheduler_active = 2, debug_locks = 1
[   12.524855] 5 locks held by kworker/u8:2/152:
[   12.525438]  #0: 00000000057be08c ((wq_completion)phy0){+.+.}, at: process_one_work+0x1a2/0x620
[   12.526607]  #1: 0000000059c6b07a ((work_completion)(&sdata->csa_finalize_work)){+.+.}, at: process_one_work+0x1a2/0x620
[   12.528001]  #2: 00000000f184ba7d (&wdev->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x2f/0x90
[   12.529116]  #3: 00000000831a1f54 (&local->mtx){+.+.}, at: ieee80211_csa_finalize_work+0x47/0x90
[   12.530233]  #4: 00000000fd06f988 (&local->chanctx_mtx){+.+.}, at: ieee80211_csa_finalize_work+0x51/0x90
Signed-off-by: Thomas Pedersen <thomas@eero.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When dumping stations, memory allocated for station_info's
pertid member will leak if the nl80211 header cannot be added to
the sk_buff due to insufficient tail room.

I noticed this leak in the kmalloc-2048 cache.

Cc: stable@vger.kernel.org
Fixes: 8689c051 ("cfg80211: dynamically allocate per-tid stats for station info")
Signed-off-by: Andy Strohman <andy@uplevelsystems.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

ieee80211_aes_gmac() uses the mic argument directly in sg_set_buf() and
that does not allow use of stack memory (e.g., BUG_ON() is hit in
sg_set_buf() with CONFIG_DEBUG_SG). BIP GMAC TX side is fine for this
since it can use the skb data buffer, but the RX side was using a stack
variable for deriving the local MIC value to compare against the
received one.

Fix this by allocating heap memory for the mic buffer.

This was found with hwsim test case ap_cipher_bip_gmac_128 hitting that
BUG_ON() and kernel panic.

Cc: stable@vger.kernel.org
Signed-off-by: Jouni Malinen <j@w1.fi>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

As per the current design, in the case of sw crypto controlled devices,
it is the device which advertises the support for AP/VLAN iftype based
on it's ability to tranmsit packets encrypted in software
(In VLAN functionality, group traffic generated for a specific
VLAN group is always encrypted in software). Commit db3bdcb9
("mac80211: allow AP_VLAN operation on crypto controlled devices")
has introduced this change.

Since 4addr AP operation also uses AP/VLAN iftype, this conditional
way of advertising AP/VLAN support has broken 4addr AP mode operation on
crypto controlled devices which do not support VLAN functionality.

In the case of ath10k driver, not all firmwares have support for VLAN
functionality but all can support 4addr AP operation. Because AP/VLAN
support is not advertised for these devices, 4addr AP operations are
also blocked.

Fix this by allowing 4addr operation on devices which do not support
AP/VLAN iftype but can support 4addr AP operation (decision is based on
the wiphy flag WIPHY_FLAG_4ADDR_AP).

Cc: stable@vger.kernel.org
Fixes: db3bdcb9 ("mac80211: allow AP_VLAN operation on crypto controlled devices")
Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warning:

drivers/net/wireless/mac80211_hwsim.c: In function ‘init_mac80211_hwsim’:
drivers/net/wireless/mac80211_hwsim.c:3853:21: warning: this statement may fall through [-Wimplicit-fallthrough=]
    param.reg_strict = true;
    ~~~~~~~~~~~~~~~~~^~~~~~
drivers/net/wireless/mac80211_hwsim.c:3854:3: note: here
   case HWSIM_REGTEST_DRIVER_REG_ALL:
   ^~~~

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enable
-Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

The reported rate is not scaled down correctly. After applying this patch,
the function will behave just like the v/ht equivalents.
Signed-off-by: Shashidhar Lakkavalli <slakkavalli@datto.com>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Fixes gcc '-Wunused-but-set-variable' warning:

net/mac80211/key.c: In function 'ieee80211_set_tx_key':
net/mac80211/key.c:271:24: warning:
 variable 'old' set but not used [-Wunused-but-set-variable]

It is not used since introduction in
commit 96fc6efb ("mac80211: IEEE 802.11 Extended Key ID support")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

When receiving a deauthentication/disassociation frame from a TDLS
peer, a station should not disconnect the current AP, but only
disable the current TDLS link if it's enabled.

Without this change, a TDLS issue can be reproduced by following the
steps as below:

1. STA-1 and STA-2 are connected to AP, bidirection traffic is running
   between STA-1 and STA-2.
2. Set up TDLS link between STA-1 and STA-2, stay for a while, then
   teardown TDLS link.
3. Repeat step #2 and monitor the connection between STA and AP.

During the test, one STA may send a deauthentication/disassociation
frame to another, after TDLS teardown, with reason code 6/7, which
means: Class 2/3 frame received from nonassociated STA.

On receive this frame, the receiver STA will disconnect the current
AP and then reconnect. It's not a expected behavior, purpose of this
frame should be disabling the TDLS link, not the link with AP.

Cc: stable@vger.kernel.org
Signed-off-by: Yu Wang <yyuwang@codeaurora.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Commit 715a1233 ("wireless: don't write C files on failures") drops
the `test -f $$f` check. The list of targets contains the
CONFIG_CFG80211_EXTRA_REGDB_KEYDIR directory itself, and this check used
to filter it out. After the check was removed, the extra keydir option
no longer works, failing with the following message:

od: 'standard input': read error: Is a directory

This commit restores the check to make extra keydir work again.

Fixes: 715a1233 ("wireless: don't write C files on failures")
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

Pull gcc plugin fix from Kees Cook:
 "Fix ARM stack-protector-per-task plugin build for older GCC < 6 (Chris
  Packham)"

* tag 'gcc-plugins-v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  gcc-plugins: arm_ssp_per_task_plugin: Fix for older GCC < 6

If a call to kobject_init_and_add() fails we must call kobject_put()
otherwise we leak memory.

Function gfs2_sys_fs_add always calls kobject_init_and_add() which
always calls kobject_init().

It is safe to leave object destruction up to the kobject release
function and never free it manually.

Remove call to kfree() and always call kobject_put() in the error path.
Signed-off-by: Tobin C. Harding <tobin@kernel.org>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull percpu updates from Dennis Zhou:

 - scan hint update which helps address performance issues with heavily
   fragmented blocks

 - lockdep fix when freeing an allocation causes balance work to be
   scheduled

* 'for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
  percpu: remove spurious lock dependency between percpu and sched
  percpu: use chunk scan_hint to skip some scanning
  percpu: convert chunk hints to be based on pcpu_block_md
  percpu: make pcpu_block_md generic
  percpu: use block scan_hint to only scan forward
  percpu: remember largest area skipped during allocation
  percpu: add block level scan_hint
  percpu: set PCPU_BITMAP_BLOCK_SIZE to PAGE_SIZE
  percpu: relegate chunks unusable when failing small allocations
  percpu: manage chunks based on contig_bits instead of free_bytes
  percpu: introduce helper to determine if two regions overlap
  percpu: do not search past bitmap when allocating an area
  percpu: update free path with correct new free region

Pull input updates from Dmitry Torokhov:
 "A few new drivers:

   - driver for Azoteq IQS550/572/525 touch controllers

   - driver for Microchip AT42QT1050 keys

   - driver for GPIO controllable vibrators

   - support for GT5663 in Goodix driver

  ... along with miscellaneous driver fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: libps2 - mark expected switch fall-through
  Input: qt1050 - add Microchip AT42QT1050 support
  Input: add support for Azoteq IQS550/572/525
  Input: add a driver for GPIO controllable vibrators
  Input: synaptics-rmi4 - fix enum_fmt
  Input: synaptics-rmi4 - fill initial format
  HID: input: add mapping for KEY_KBD_LAYOUT_NEXT
  Input: add KEY_KBD_LAYOUT_NEXT
  Input: hyperv-keyboard - add module description
  Input: olpc_apsp - depend on ARCH_MMP
  Input: sun4i-a10-lradc-keys - add support for A83T
  Input: snvs_pwrkey - use dev_pm_set_wake_irq() to simplify code
  Input: lpc32xx-key - add clocks property and fix DT binding example
  Input: i8042 - signal wakeup from atkbd/psmouse
  Input: goodix - add GT5663 CTP support
  Input: goodix - add regulators suppot
  Input: evdev - use struct_size() in kzalloc() and vzalloc()
  Input: edt-ft5x06 - convert to use SPDX identifier
  Input: edt-ft5x06 - enable ACPI enumeration

Pull networking fixes from David Miller:
 "Fixes all over:

   1) Netdev refcnt leak in nf_flow_table, from Taehee Yoo.

   2) Fix RCU usage in nf_tables, from Florian Westphal.

   3) Fix DSA build when NET_DSA_TAG_BRCM_PREPEND is not set, from Yue
      Haibing.

   4) Add missing page read/write ops to realtek driver, from Heiner
      Kallweit.

   5) Endianness fix in qrtr code, from Nicholas Mc Guire.

   6) Fix various bugs in DSA_SKB_* macros, from Vladimir Oltean.

   7) Several BPF documentation cures, from Quentin Monnet.

   8) Fix undefined behavior in narrow load handling of BPF verifier,
      from Krzesimir Nowak.

   9) DMA ops crash in SGI Seeq driver due to not set netdev parent
      device pointer, from Thomas Bogendoerfer.

  10) Flow dissector has to disable preemption when invoking BPF
      program, from Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (48 commits)
  net: ethernet: stmmac: dwmac-sun8i: enable support of unicast filtering
  net: ethernet: ti: netcp_ethss: fix build
  flow_dissector: disable preemption around BPF calls
  bonding: fix arp_validate toggling in active-backup mode
  net: meson: fixup g12a glue ephy id
  net: phy: realtek: Replace phy functions with non-locked version in rtl8211e_config_init()
  net: seeq: fix crash caused by not set dev.parent
  of_net: Fix missing of_find_device_by_node ref count drop
  net: mvpp2: cls: Add missing NETIF_F_NTUPLE flag
  bpf: fix undefined behavior in narrow load handling
  libbpf: detect supported kernel BTF features and sanitize BTF
  selftests: bpf: Add files generated after build to .gitignore
  tools: bpf: synchronise BPF UAPI header with tools
  bpf: fix minor issues in documentation for BPF helpers.
  bpf: fix recurring typo in documentation for BPF helpers
  bpf: fix script for generating man page on BPF helpers
  bpf: add various test cases for backward jumps
  net: dccp : proto: remove Unneeded variable "err"
  net: dsa: Remove the now unused DSA_SKB_CB_COPY() macro
  net: dsa: Remove dangerous DSA_SKB_CLONE() macro
  ...

Merge tag 'fsnotify_for_v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs

Pull fsnotify fixes from Jan Kara:
 "Two fsnotify fixes"

* tag 'fsnotify_for_v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: fix unlink performance regression
  fsnotify: Clarify connector assignment in fsnotify_add_mark_list()

Pull misc filesystem updates from Jan Kara:
 "A couple of small bugfixes and cleanups for quota, udf, ext2, and
  reiserfs"

* tag 'fs_for_v5.2-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  quota: check time limit when back out space/inode change
  fs/quota: erase unused but set variable warning
  quota: fix wrong indentation
  udf: fix an uninitialized read bug and remove dead code
  fs/reiserfs/journal.c: Make remove_journal_hash static
  quota: remove trailing whitespaces
  quota: code cleanup for __dquot_alloc_space()
  ext2: Adjust the comment of function ext2_alloc_branch
  udf: Explain handling of load_nls() failure

When adding more MAC addresses to a dwmac-sun8i interface, the device goes
directly in promiscuous mode.
This is due to IFF_UNICAST_FLT missing flag.

So since the hardware support unicast filtering, let's add IFF_UNICAST_FLT.

Fixes: 9f93ac8d ("net-next: stmmac: Add dwmac-sun8i")
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix reported build fail:
ERROR: "cpsw_ale_flush_multicast" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!
ERROR: "cpsw_ale_create" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!
ERROR: "cpsw_ale_add_vlan" [drivers/net/ethernet/ti/keystone_netcp_ethss.ko] undefined!

Fixes: 16f54164 ("net: ethernet: ti: cpsw: drop CONFIG_TI_CPSW_ALE config option")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Various things in eBPF really require us to disable preemption
before running an eBPF program.

syzbot reported :

BUG: assuming atomic context at net/core/flow_dissector.c:737
in_atomic(): 0, irqs_disabled(): 0, pid: 24710, name: syz-executor.3
2 locks held by syz-executor.3/24710:
 #0: 00000000e81a4bf1 (&tfile->napi_mutex){+.+.}, at: tun_get_user+0x168e/0x3ff0 drivers/net/tun.c:1850
 #1: 00000000254afebd (rcu_read_lock){....}, at: __skb_flow_dissect+0x1e1/0x4bb0 net/core/flow_dissector.c:822
CPU: 1 PID: 24710 Comm: syz-executor.3 Not tainted 5.1.0+ #6
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0x172/0x1f0 lib/dump_stack.c:113
 __cant_sleep kernel/sched/core.c:6165 [inline]
 __cant_sleep.cold+0xa3/0xbb kernel/sched/core.c:6142
 bpf_flow_dissect+0xfe/0x390 net/core/flow_dissector.c:737
 __skb_flow_dissect+0x362/0x4bb0 net/core/flow_dissector.c:853
 skb_flow_dissect_flow_keys_basic include/linux/skbuff.h:1322 [inline]
 skb_probe_transport_header include/linux/skbuff.h:2500 [inline]
 skb_probe_transport_header include/linux/skbuff.h:2493 [inline]
 tun_get_user+0x2cfe/0x3ff0 drivers/net/tun.c:1940
 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2037
 call_write_iter include/linux/fs.h:1872 [inline]
 do_iter_readv_writev+0x5fd/0x900 fs/read_write.c:693
 do_iter_write fs/read_write.c:970 [inline]
 do_iter_write+0x184/0x610 fs/read_write.c:951
 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1015
 do_writev+0x15b/0x330 fs/read_write.c:1058
 __do_sys_writev fs/read_write.c:1131 [inline]
 __se_sys_writev fs/read_write.c:1128 [inline]
 __x64_sys_writev+0x75/0xb0 fs/read_write.c:1128
 do_syscall_64+0x103/0x670 arch/x86/entry/common.c:298
 entry_SYSCALL_64_after_hwframe+0x49/0xbe

Fixes: d58e468b ("flow_dissector: implements flow dissector BPF hook")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Petar Penkov <ppenkov@google.com>
Cc: Stanislav Fomichev <sdf@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

There's currently a problem with toggling arp_validate on and off with an
active-backup bond. At the moment, you can start up a bond, like so:

modprobe bonding mode=1 arp_interval=100 arp_validate=0 arp_ip_targets=192.168.1.1
ip link set bond0 down
echo "ens4f0" > /sys/class/net/bond0/bonding/slaves
echo "ens4f1" > /sys/class/net/bond0/bonding/slaves
ip link set bond0 up
ip addr add 192.168.1.2/24 dev bond0

Pings to 192.168.1.1 work just fine. Now turn on arp_validate:

echo 1 > /sys/class/net/bond0/bonding/arp_validate

Pings to 192.168.1.1 continue to work just fine. Now when you go to turn
arp_validate off again, the link falls flat on it's face:

echo 0 > /sys/class/net/bond0/bonding/arp_validate
dmesg
...
[133191.911987] bond0: Setting arp_validate to none (0)
[133194.257793] bond0: bond_should_notify_peers: slave ens4f0
[133194.258031] bond0: link status definitely down for interface ens4f0, disabling it
[133194.259000] bond0: making interface ens4f1 the new active one
[133197.330130] bond0: link status definitely down for interface ens4f1, disabling it
[133197.331191] bond0: now running without any active interface!

The problem lies in bond_options.c, where passing in arp_validate=0
results in bond->recv_probe getting set to NULL. This flies directly in
the face of commit 3fe68df9, which says we need to set recv_probe =
bond_arp_recv, even if we're not using arp_validate. Said commit fixed
this in bond_option_arp_interval_set, but missed that we can get to that
same state in bond_option_arp_validate_set as well.

One solution would be to universally set recv_probe = bond_arp_recv here
as well, but I don't think bond_option_arp_validate_set has any business
touching recv_probe at all, and that should be left to the arp_interval
code, so we can just make things much tidier here.

Fixes: 3fe68df9 ("bonding: always set recv_probe to bond_arp_rcv in arp monitor")
CC: Jay Vosburgh <j.vosburgh@gmail.com>
CC: Veaceslav Falico <vfalico@gmail.com>
CC: Andy Gospodarek <andy@greyhouse.net>
CC: "David S. Miller" <davem@davemloft.net>
CC: netdev@vger.kernel.org
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The phy id chosen by Amlogic is incorrectly set in the mdio mux and
does not match the phy driver.

It was not detected before because DT forces the use the correct driver
for the internal PHY.

Fixes: 70904251 ("net: phy: add amlogic g12a mdio mux support")
Reported-by: Qi Duan <qi.duan@amlogic.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After calling phy_select_page() and until calling phy_restore_page(),
the mutex 'mdio_lock' is already locked, so the driver should use
non-locked version of phy functions. Or there will be a deadlock with
'mdio_lock'.

This replaces phy functions called from rtl8211e_config_init() to avoid
the deadlock issue.

Fixes: f81dadbc ("net: phy: realtek: Add rtl8211e rx/tx delays config")
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The old MIPS implementation of dma_cache_sync() didn't use the dev argument,
but commit c9eb6172 ("dma-mapping: turn dma_cache_sync into a
dma_map_ops method") changed that, so we now need to set dev.parent.
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Postpone chain policy update to drop after transaction is complete,
   from Florian Westphal.

2) Add entry to flowtable after confirmation to fix UDP flows with
   packets going in one single direction.

3) Reference count leak in dst object, from Taehee Yoo.

4) Check for TTL field in flowtable datapath, from Taehee Yoo.

5) Fix h323 conntrack helper due to incorrect boundary check,
   from Jakub Jankowski.

6) Fix incorrect rcu dereference when fetching basechain stats,
   from Florian Westphal.

7) Missing error check when adding new entries to flowtable,
   from Taehee Yoo.

8) Use version field in nfnetlink message to honor the nfgen_family
   field, from Kristian Evensen.

9) Remove incorrect configuration check for CONFIG_NF_CONNTRACK_IPV6,
   from Subash Abhinov Kasiviswanathan.

10) Prevent dying entries from being added to the flowtable,
    from Taehee Yoo.

11) Don't hit WARN_ON() with malformed blob in ebtables with
    trailing data after last rule, reported by syzbot, patch
    from Florian Westphal.

12) Remove NFT_CT_TIMEOUT enumeration, never used in the kernel
    code.

13) Fix incorrect definition for NFT_LOGLEVEL_MAX, from Florian
    Westphal.

This batch comes with a conflict that can be fixed with this patch:

diff --cc include/uapi/linux/netfilter/nf_tables.h
index 7bdb234f3d8c,f0cf7b0f4f35..505393c6e959
--- a/include/uapi/linux/netfilter/nf_tables.h
+++ b/include/uapi/linux/netfilter/nf_tables.h
@@@ -966,6 -966,8 +966,7 @@@ enum nft_socket_keys
   * @NFT_CT_DST_IP: conntrack layer 3 protocol destination (IPv4 address)
   * @NFT_CT_SRC_IP6: conntrack layer 3 protocol source (IPv6 address)
   * @NFT_CT_DST_IP6: conntrack layer 3 protocol destination (IPv6 address)
 - * @NFT_CT_TIMEOUT: connection tracking timeout policy assigned to conntrack
+  * @NFT_CT_ID: conntrack id
   */
  enum nft_ct_keys {
  	NFT_CT_STATE,
@@@ -991,6 -993,8 +992,7 @@@
  	NFT_CT_DST_IP,
  	NFT_CT_SRC_IP6,
  	NFT_CT_DST_IP6,
 -	NFT_CT_TIMEOUT,
+ 	NFT_CT_ID,
  	__NFT_CT_MAX
  };
  #define NFT_CT_MAX		(__NFT_CT_MAX - 1)

That replaces the unused NFT_CT_TIMEOUT definition by NFT_CT_ID. If you prefer,
I can also solve this conflict here, just let me know.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

of_find_device_by_node takes a reference to the embedded struct device
which needs to be dropped after use.

Fixes: d01f449c ("of_net: add NVMEM support to of_get_mac_address")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Petr Štetiar <ynezz@true.cz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that the mvpp2 driver supports classification offloading, we must
add the NETIF_F_NTUPLE to the features list.

Since the current code doesn't allow disabling the feature, we don't set
the flag in dev->hw_features.

Fixes: 90b509b3 ("net: mvpp2: cls: Add Classification offload support")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull IOMMU updates from Joerg Roedel:

 - ATS support for ARM-SMMU-v3.

 - AUX domain support in the IOMMU-API and the Intel VT-d driver. This
   adds support for multiple DMA address spaces per (PCI-)device. The
   use-case is to multiplex devices between host and KVM guests in a
   more flexible way than supported by SR-IOV.

 - the rest are smaller cleanups and fixes, two of which needed to be
   reverted after testing in linux-next.

* tag 'iommu-updates-v5.2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (45 commits)
  Revert "iommu/amd: Flush not present cache in iommu_map_page"
  Revert "iommu/amd: Remove the leftover of bypass support"
  iommu/vt-d: Fix leak in intel_pasid_alloc_table on error path
  iommu/vt-d: Make kernel parameter igfx_off work with vIOMMU
  iommu/vt-d: Set intel_iommu_gfx_mapped correctly
  iommu/amd: Flush not present cache in iommu_map_page
  iommu/vt-d: Cleanup: no spaces at the start of a line
  iommu/vt-d: Don't request page request irq under dmar_global_lock
  iommu/vt-d: Use struct_size() helper
  iommu/mediatek: Fix leaked of_node references
  iommu/amd: Remove amd_iommu_pd_list
  iommu/arm-smmu: Log CBFRSYNRA register on context fault
  iommu/arm-smmu-v3: Don't disable SMMU in kdump kernel
  iommu/arm-smmu-v3: Disable tagged pointers
  iommu/arm-smmu-v3: Add support for PCI ATS
  iommu/arm-smmu-v3: Link domains and devices
  iommu/arm-smmu-v3: Add a master->domain pointer
  iommu/arm-smmu-v3: Store SteamIDs in master
  iommu/arm-smmu-v3: Rename arm_smmu_master_data to arm_smmu_master
  ACPI/IORT: Check ATS capability in root complex nodes
  ...

Pull watchdog updates from Wim Van Sebroeck:

 - a new watchdog driver for the ROHM BD70528 watchdog block

 - a new watchdog driver for the i.MX system controller watchdog

 - conversions to use device managed functions and other improvements

 - refactor watchdog_init_timeout

 - make watchdog core configurable as module

 - pretimeout governors improvements

 - a lot of other fixes

* tag 'linux-watchdog-5.2-rc1' of git://www.linux-watchdog.org/linux-watchdog: (114 commits)
  watchdog: Enforce that at least one pretimeout governor is enabled
  watchdog: stm32: add dynamic prescaler support
  watchdog: Improve Kconfig entry ordering and dependencies
  watchdog: npcm: Enable modular builds
  watchdog: Make watchdog core configurable as module
  watchdog: Move pretimeout governor configuration up
  watchdog: Use depends instead of select for pretimeout governors
  watchdog: rtd119x: drop unused module.h include
  watchdog: intel_scu: make it explicitly non-modular
  watchdog: coh901327: make it explicitly non-modular
  watchdog: ziirave_wdt: drop warning after calling watchdog_init_timeout
  watchdog: xen_wdt: drop warning after calling watchdog_init_timeout
  watchdog: stm32_iwdg: drop warning after calling watchdog_init_timeout
  watchdog: st_lpc_wdt: drop warning after calling watchdog_init_timeout
  watchdog: sp5100_tco: drop warning after calling watchdog_init_timeout
  watchdog: renesas_wdt: drop warning after calling watchdog_init_timeout
  watchdog: nic7018_wdt: drop warning after calling watchdog_init_timeout
  watchdog: ni903x_wdt: drop warning after calling watchdog_init_timeout
  watchdog: imx_sc_wdt: drop warning after calling watchdog_init_timeout
  watchdog: i6300esb: drop warning after calling watchdog_init_timeout
  ...

Daniel Borkmann says:

====================
pull-request: bpf 2019-05-13

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix out of bounds backwards jumps due to a bug in dead code
   removal, from Daniel.

2) Fix libbpf users by detecting unsupported BTF kernel features
   and sanitize them before load, from Andrii.

3) Fix undefined behavior in narrow load handling of context
   fields, from Krzesimir.

4) Various BPF uapi header doc/man page fixes, from Quentin.

5) Misc .gitignore fixups to exclude built files, from Kelsey.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit 31fd8581 ("bpf: permits narrower load from bpf program
context fields") made the verifier add AND instructions to clear the
unwanted bits with a mask when doing a narrow load. The mask is
computed with

  (1 << size * 8) - 1

where "size" is the size of the narrow load. When doing a 4 byte load
of a an 8 byte field the verifier shifts the literal 1 by 32 places to
the left. This results in an overflow of a signed integer, which is an
undefined behavior. Typically, the computed mask was zero, so the
result of the narrow load ended up being zero too.

Cast the literal to long long to avoid overflows. Note that narrow
load of the 4 byte fields does not have the undefined behavior,
because the load size can only be either 1 or 2 bytes, so shifting 1
by 8 or 16 places will not overflow it. And reading 4 bytes would not
be a narrow load of a 4 bytes field.

Fixes: 31fd8581 ("bpf: permits narrower load from bpf program context fields")
Reviewed-by: Alban Crequy <alban@kinvolk.io>
Reviewed-by: Iago López Galeiras <iago@kinvolk.io>
Signed-off-by: Krzesimir Nowak <krzesimir@kinvolk.io>
Cc: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Depending on used versions of libbpf, Clang, and kernel, it's possible to
have valid BPF object files with valid BTF information, that still won't
load successfully due to Clang emitting newer BTF features (e.g.,
BTF_KIND_FUNC, .BTF.ext's line_info/func_info, BTF_KIND_DATASEC, etc), that
are not yet supported by older kernel.

This patch adds detection of BTF features and sanitizes BPF object's BTF
by substituting various supported BTF kinds, which have compatible layout:
  - BTF_KIND_FUNC -> BTF_KIND_TYPEDEF
  - BTF_KIND_FUNC_PROTO -> BTF_KIND_ENUM
  - BTF_KIND_VAR -> BTF_KIND_INT
  - BTF_KIND_DATASEC -> BTF_KIND_STRUCT

Replacement is done in such a way as to preserve as much information as
possible (names, sizes, etc) where possible without violating kernel's
validation rules.

v2->v3:
  - remove duplicate #defines from libbpf_util.h

v1->v2:
  - add internal libbpf_internal.h w/ common stuff
  - switch SK storage BTF to use new libbpf__probe_raw_btf()
Reported-by: Alexei Starovoitov <ast@fb.com>
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The following files are generated after building /selftests/bpf/ and
should be added to .gitignore:

	- libbpf.pc
	- libbpf.so.*
Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Quentin Monnet says:

====================
Another round of fixes for the doc in the BPF UAPI header, which can be
turned into a manual page. First patch is the most important, as it fixes
parsing for the bpf_strtoul() helper doc. Following patches are formatting
fixes (nitpicks, mostly). The last one updates the copy of the header,
located under tools/.
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

Synchronise the bpf.h header under tools, to report the fixes and
additions recently brought to the documentation for the BPF helpers.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

This commit brings many minor fixes to the documentation for BPF helper
functions. Mostly, this is limited to formatting fixes and improvements.
In particular, fix broken formatting for bpf_skb_adjust_room().

Besides formatting, replace the mention of "bpf_fullsock()" (that is not
associated with any function or type exposed to the user) in the
description of bpf_sk_storage_get() by "full socket".
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

"Underlaying packet buffer" should be an "underlying" one, in the
warning about invalidated data and data_end pointers. Through
copy-and-paste, the typo occurred no fewer than 19 times in the
documentation. Let's fix it.
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

The script broke on parsing function prototype for bpf_strtoul(). This
is because the last argument for the function is a pointer to an
"unsigned long". The current version of the script only accepts "const"
and "struct", but not "unsigned", at the beginning of argument types
made of several words.

One solution could be to add "unsigned" to the list, but the issue could
come up again in the future (what about "long int"?). It turns out we do
not need to have such restrictions on the words: so let's simply accept
any series of words instead.
Reported-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>