- 04 Jul, 2014 1 commit
-
-
Jie Liu authored
commit 17ec81c1 upstream. At xfs_iext_realloc_direct(), the new_size is changed by adding if_bytes if originally the extent records are stored at the inline extent buffer, and we have to switch from it to a direct extent list for those new allocated extents, this is wrong. e.g, Create a file with three extents which was showing as following, xfs_io -f -c "truncate 100m" /xfs/testme for i in $(seq 0 5 10); do offset=$(($i * $((1 << 20)))) xfs_io -c "pwrite $offset 1m" /xfs/testme done Inline ------ irec: if_bytes bytes_diff new_size 1st 0 16 16 2nd 16 16 32 Switching --------- rnew_size 3rd 32 16 48 + 32 = 80 roundup=128 In this case, the desired value of new_size should be 48, and then it will be roundup to 64 and be assigned to rnew_size. However, this issue has been covered by resetting the if_bytes to the new_size which is calculated at the begnning of xfs_iext_add() before leaving out this function, and in turn make the rnew_size correctly again. Hence, this can not be detected via xfstestes. This patch fix above problem and revise the new_size comments at xfs_iext_realloc_direct() to make it more readable. Also, fix the comments while switching from the inline extent buffer to a direct extent list to reflect this change. Signed-off-by:
Jie Liu <jeff.liu@oracle.com> Reviewed-by:
Dave Chinner <dchinner@redhat.com> Signed-off-by:
Ben Myers <bpm@sgi.com> Signed-off-by:
Jiri Slaby <jslaby@suse.cz>
-
- 02 Jul, 2014 39 commits
-
-
Johan Hedberg authored
commit e694788d upstream. The conn->link_key variable tracks the type of link key in use. It is set whenever we respond to a link key request as well as when we get a link key notification event. These two events do not however always guarantee that encryption is enabled: getting a link key request and responding to it may only mean that the remote side has requested authentication but not encryption. On the other hand, the encrypt change event is a certain guarantee that encryption is enabled. The real encryption state is already tracked in the conn->link_mode variable through the HCI_LM_ENCRYPT bit. This patch fixes a check for encryption in the hci_conn_auth function to use the proper conn->link_mode value and thereby eliminates the chance of a false positive result. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Johan Hedberg authored
commit 09da1f34 upstream. When we're performing reauthentication (in order to elevate the security level from an unauthenticated key to an authenticated one) we do not need to issue any encryption command once authentication completes. Since the trigger for the encryption HCI command is the ENCRYPT_PEND flag this flag should not be set in this scenario. Instead, the REAUTH_PEND flag takes care of all necessary steps for reauthentication. Signed-off-by:
-
Mathias Krause authored
commit 278f2b3e upstream. The ulog messages leak heap bytes by the means of padding bytes and incompletely filled string arrays. Fix those by memset(0)'ing the whole struct before filling it. Signed-off-by:
Mathias Krause <minipli@googlemail.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Andrzej Zaborowski authored
commit 783ee431 upstream. In generic_id the long int timestamp is multiplied by 100000 and needs an explicit cast to u64. Without that the id in the resulting pstore filename is wrong and userspace may have problems parsing it, but more importantly files in pstore can never be deleted and may fill the EFI flash (brick device?). This happens because when generic pstore code wants to delete a file, it passes the id to the EFI backend which reinterpretes it and a wrong variable name is attempted to be deleted. There's no error message but after remounting pstore, deleted files would reappear. Signed-off-by:
Andrew Zaborowski <andrew.zaborowski@intel.com> Acked-by:
David Rientjes <rientjes@google.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Fathi Boudra authored
commit 6b4a144a upstream. In cross-build environment, we expect to use the cross-compiler objcopy instead of the host objcopy. It fixes following build failures: objcopy --only-keep-debug lib/modules/3.14/kernel/net/ipv6/xfrm6_mode_tunnel.ko /srv/build/linux/debian/dbgtmp/usr/lib/debug/lib/modules/3.14/kernel/net/ipv6/xfrm6_mode_tunnel.ko objcopy: Unable to recognise the format of the input file `lib/modules/3.14/kernel/net/ipv6/xfrm6_mode_tunnel.ko' Signed-off-by:
Fathi Boudra <fathi.boudra@linaro.org> Fixes: 810e8437 ('deb-pkg: split debug symbols in their own package') Reviewed-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Andy Lutomirski authored
commit 554086d8 upstream. The bad syscall nr paths are their own incomprehensible route through the entry control flow. Rearrange them to work just like syscalls that return -ENOSYS. This fixes an OOPS in the audit code when fast-path auditing is enabled and sysenter gets a bad syscall nr (CVE-2014-4508). This has probably been broken since Linux 2.6.27: af0575bb i386 syscall audit fast-path Cc: Roland McGrath <roland@redhat.com> Reported-by:
Toralf Förster <toralf.foerster@gmx.de> Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Link: http://lkml.kernel.org/r/e09c499eade6fc321266dd6b54da7beb28d6991c.1403558229.git.luto@amacapital.netSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Greg Kroah-Hartman authored
commit 4148c1f6 upstream. There is one other possible overrun in the lz4 code as implemented by Linux at this point in time (which differs from the upstream lz4 codebase, but will get synced at in a future kernel release.) As pointed out by Don, we also need to check the overflow in the data itself. While we are at it, replace the odd error return value with just a "simple" -1 value as the return value is never used for anything other than a basic "did this work or not" check. Reported-by:
"Don A. Bailey" <donb@securitymouse.com> Reported-by:
Willy Tarreau <w@1wt.eu> Signed-off-by:
-
Eric Sandeen authored
commit 3e2426bd upstream. If this condition in end_extent_writepage() is false: if (tree->ops && tree->ops->writepage_end_io_hook) we will then test an uninitialized "ret" at: ret = ret < 0 ? ret : -EIO; The test for ret is for the case where ->writepage_end_io_hook failed, and we'd choose that ret as the error; but if there is no ->writepage_end_io_hook, nothing sets ret. Initializing ret to 0 should be sufficient; if writepage_end_io_hook wasn't set, (!uptodate) means non-zero err was passed in, so we choose -EIO in that case. Signed-of-by:
Eric Sandeen <sandeen@redhat.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Liu Bo authored
commit 6eda71d0 upstream. The skinny extents are intepreted incorrectly in scrub_print_warning(), and end up hitting the BUG() in btrfs_extent_inline_ref_size. Reported-by:
Konstantinos Skarlatos <k.skarlatos@gmail.com> Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
-
Liu Bo authored
commit cd857dd6 upstream. We want to make sure the point is still within the extent item, not to verify the memory it's pointing to. Signed-off-by:
-
Rickard Strandqvist authored
commit 8321cf25 upstream. There is otherwise a risk of a possible null pointer dereference. Was largely found by using a static code analysis program called cppcheck. Signed-off-by:
Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by:
-
Filipe Manana authored
commit 1af56070 upstream. If we are doing an incremental send and the base snapshot has a directory with name X that doesn't exist anymore in the second snapshot and a new subvolume/snapshot exists in the second snapshot that has the same name as the directory (name X), the incremental send would fail with -ENOENT error. This is because it attempts to lookup for an inode with a number matching the objectid of a root, which doesn't exist. Steps to reproduce: mkfs.btrfs -f /dev/sdd mount /dev/sdd /mnt mkdir /mnt/testdir btrfs subvolume snapshot -r /mnt /mnt/mysnap1 rmdir /mnt/testdir btrfs subvolume create /mnt/testdir btrfs subvolume snapshot -r /mnt /mnt/mysnap2 btrfs send -p /mnt/mysnap1 /mnt/mysnap2 -f /tmp/send.data A test case for xfstests follows. Reported-by:
Robert White <rwhite@pobox.com> Signed-off-by:
Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
-
Wang Shilong authored
commit 29865841 upstream. Seeding device support allows us to create a new filesystem based on existed filesystem. However newly created filesystem's @total_devices should include seed devices. This patch fix the following problem: # mkfs.btrfs -f /dev/sdb # btrfstune -S 1 /dev/sdb # mount /dev/sdb /mnt # btrfs device add -f /dev/sdc /mnt --->fs_devices->total_devices = 1 # umount /mnt # mount /dev/sdc /mnt --->fs_devices->total_devices = 2 This is because we record right @total_devices in superblock, but @fs_devices->total_devices is reset to be 0 in btrfs_prepare_sprout(). Fix this problem by not resetting @fs_devices->total_devices. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Signed-off-by:
-
Liu Bo authored
commit 5dca6eea upstream. According to commit 865ffef3 (fs: fix fsync() error reporting), it's not stable to just check error pages because pages can be truncated or invalidated, we should also mark mapping with error flag so that a later fsync can catch the error. Signed-off-by:
-
Liu Bo authored
commit 29cc83f6 upstream. Same as normal devices, seed devices should be initialized with fs_info->dev_root as well, otherwise we'll get a NULL pointer crash. Cc: Chris Murphy <lists@colorremedies.com> Reported-by:
Chris Murphy <lists@colorremedies.com> Signed-off-by:
-
Wang Shilong authored
commit de348ee0 upstream. In close_ctree(), after we have stopped all workers,there maybe still some read requests(for example readahead) to submit and this *maybe* trigger an oops that user reported before: kernel BUG at fs/btrfs/async-thread.c:619! By hacking codes, i can reproduce this problem with one cpu available. We fix this potential problem by invalidating all btree inode pages before stopping all workers. Thanks to Miao for pointing out this problem. Signed-off-by:
David Sterba <dsterba@suse.cz> Signed-off-by:
-
Miao Xie authored
commit 32d6b47f upstream. If we fail to load a free space cache, we can rebuild it from the extent tree, so it is not a serious error, we should not output a error message that would make the users uncomfortable. This patch uses warning message instead of it. Signed-off-by:
Miao Xie <miaox@cn.fujitsu.com> Signed-off-by:
-
Qu Wenruo authored
commit 5a1972bd upstream. Btrfs will send uevent to udev inform the device change, but ctime/mtime for the block device inode is not udpated, which cause libblkid used by btrfs-progs unable to detect device change and use old cache, causing 'btrfs dev scan; btrfs dev rmove; btrfs dev scan' give an error message. Reported-by:
Tsutomu Itoh <t-itoh@jp.fujitsu.com> Cc: Karel Zak <kzak@redhat.com> Signed-off-by:
Qu Wenruo <quwenruo@cn.fujitsu.com> Signed-off-by:
-
Chris Mason authored
commit 7d788742 upstream. We need to NULL the cached_state after freeing it, otherwise we might free it again if find_delalloc_range doesn't find anything. Signed-off-by:
-
Pavel Shilovsky authored
commit 663a9621 upstream. Signed-off-by:
Pavel Shilovsky <pshilovsky@samba.org> Reviewed-by:
Shirish Pargaonkar <spargaonkar@suse.com> Signed-off-by:
Steve French <smfrench@gmail.com> Signed-off-by:
-
Benjamin LaHaise authored
commit edfbbf38 upstream. A kernel memory disclosure was introduced in aio_read_events_ring() in v3.10 by commit a31ad380. The changes made to aio_read_events_ring() failed to correctly limit the index into ctx->ring_pages[], allowing an attacked to cause the subsequent kmap() of an arbitrary page with a copy_to_user() to copy the contents into userspace. This vulnerability has been assigned CVE-2014-0206. Thanks to Mateusz and Petr for disclosing this issue. This patch applies to v3.12+. A separate backport is needed for 3.10/3.11. Signed-off-by:
Benjamin LaHaise <bcrl@kvack.org> Cc: Mateusz Guzik <mguzik@redhat.com> Cc: Petr Matousek <pmatouse@redhat.com> Cc: Kent Overstreet <kmo@daterainc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
commit 1e77d0a1 upstream. Till reported that the spurious interrupt detection of threaded interrupts is broken in two ways: - note_interrupt() is called for each action thread of a shared interrupt line. That's wrong as we are only interested whether none of the device drivers felt responsible for the interrupt, but by calling multiple times for a single interrupt line we account IRQ_NONE even if one of the drivers felt responsible. - note_interrupt() when called from the thread handler is not serialized. That leaves the members of irq_desc which are used for the spurious detection unprotected. To solve this we need to defer the spurious detection of a threaded interrupt to the next hardware interrupt context where we have implicit serialization. If note_interrupt is called with action_ret == IRQ_WAKE_THREAD, we check whether the previous interrupt requested a deferred check. If not, we request a deferred check for the next hardware interrupt and return. If set, we check whether one of the interrupt threads signaled success. Depending on this information we feed the result into the spurious detector. If one primary handler of a shared interrupt returns IRQ_HANDLED we disable the deferred check of irq threads on the same line, as we have found at least one device driver who cared. Reported-by:
Till Straumann <strauman@slac.stanford.edu> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Austin Schuh <austin@peloton-tech.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Wolfgang Grandegger <wg@grandegger.com> Cc: Pavel Pisa <pisa@cmp.felk.cvut.cz> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Cc: linux-can@vger.kernel.org Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1303071450130.22263@ionosSigned-off-by:
-
Mike Frysinger authored
commit 7fd44dac upstream. The io_setup takes a pointer to a context id of type aio_context_t. This in turn is typed to a __kernel_ulong_t. We could tweak the exported headers to define this as a 64bit quantity for specific ABIs, but since we already have a 32bit compat shim for the x86 ABI, let's just re-use that logic. The libaio package is also written to expect this as a pointer type, so a compat shim would simplify that. The io_submit func operates on an array of pointers to iocb structs. Padding out the array to be 64bit aligned is a huge pain, so convert it over to the existing compat shim too. We don't convert io_getevents to the compat func as its only purpose is to handle the timespec struct, and the x32 ABI uses 64bit times. With this change, the libaio package can now pass its testsuite when built for the x32 ABI. Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Link: http://lkml.kernel.org/r/1399250595-5005-1-git-send-email-vapier@gentoo.org Cc: H.J. Lu <hjl.tools@gmail.com> Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
H. Peter Anvin authored
commit 246f2d2e upstream. It is not safe to use LAR to filter when to go down the espfix path, because the LDT is per-process (rather than per-thread) and another thread might change the descriptors behind our back. Fortunately it is always *safe* (if a bit slow) to go down the espfix path, and a 32-bit LDT stack segment is extremely rare. Signed-off-by:
-
Nicholas A. Bellinger authored
[Note that a different patch to address the same issue went in during v3.15-rc1 (commit 4442dc8a), but includes a bunch of other changes that don't strictly apply to fixing the bug] This patch changes rd_allocate_sgl_table() to explicitly clear ramdisk_mcp backend memory pages by passing __GFP_ZERO into alloc_pages(). This addresses a potential security issue where reading from a ramdisk_mcp could return sensitive information, and follows what >= v3.15 does to explicitly clear ramdisk_mcp memory at backend device initialization time. Reported-by:
Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt> Cc: Jorge Daniel Sequeira Matias <jdsm@tecnico.ulisboa.pt> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Roland Dreier authored
commit 2426bd45 upstream. When an initiator sends an allocation length bigger than what its command consumes, the target should only return the actual response data and set the residual length to the unused part of the allocation length. Add a helper function that command handlers (INQUIRY, READ CAPACITY, etc) can use to do this correctly, and use this code to get the correct residual for commands that don't use the full initiator allocation in the handlers for READ CAPACITY, READ CAPACITY(16), INQUIRY, MODE SENSE and REPORT LUNS. This addresses a handful of failures as reported by Christophe with the Windows Certification Kit: http://permalink.gmane.org/gmane.linux.scsi.target.devel/6515Signed-off-by:
Roland Dreier <roland@purestorage.com> Tested-by:
Christophe Vu-Brugier <cvubrugier@yahoo.fr> Signed-off-by:
-
Sagi Grimberg authored
commit 22c7aaa5 upstream. In case the transport is iser we should not include the iscsi target info in the sendtargets text response pdu. This causes sendtargets response to include the target info twice. Modify iscsit_build_sendtargets_response to filter transport types that don't match. Signed-off-by:
Sagi Grimberg <sagig@mellanox.com> Reported-by:
Slava Shwartsman <valyushash@gmail.com> Signed-off-by:
-
Nicholas Bellinger authored
commit bbc05048 upstream. This patch fixes a iscsi_queue_req memory leak when ABORT_TASK response has been queued by TFO->queue_tm_rsp() -> lio_queue_tm_rsp() after a long standing I/O completes, but the connection has already reset and waiting for cleanup to complete in iscsit_release_commands_from_conn() -> transport_generic_free_cmd() -> transport_wait_for_tasks() code. It moves iscsit_free_queue_reqs_for_conn() after the per-connection command list has been released, so that the associated se_cmd tag can be completed + released by target-core before freeing any remaining iscsi_queue_req memory for the connection generated by lio_queue_tm_rsp(). Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Charalampos Pournaris <charpour@gmail.com> Signed-off-by:
-
Nicholas Bellinger authored
commit a95d6511 upstream. This patch fixes a bug where multiple waiters on ->t_transport_stop_comp occurs due to a concurrent ABORT_TASK and session reset both invoking transport_wait_for_tasks(), while waiting for the associated se_cmd descriptor backend processing to complete. For this case, complete_all() should be invoked in order to wake up both waiters in core_tmr_abort_task() + transport_generic_free_cmd() process contexts. Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Charalampos Pournaris <charpour@gmail.com> Signed-off-by:
-
Nicholas Bellinger authored
commit f15e9cd9 upstream. This patch fixes a bug where se_cmd descriptors associated with a Task Management Request (TMR) where not setting CMD_T_ACTIVE before being dispatched into target_tmr_work() process context. This is required in order for transport_generic_free_cmd() -> transport_wait_for_tasks() to wait on se_cmd->t_transport_stop_comp if a session reset event occurs while an ABORT_TASK is outstanding waiting for another I/O to complete. Cc: Thomas Glanzmann <thomas@glanzmann.de> Cc: Charalampos Pournaris <charpour@gmail.com> Signed-off-by:
-
Sagi Grimberg authored
commit f5ebec96 upstream. disconnected_handler works are scheduled on system_wq. When attempting to unload, first make sure all works have cleaned up. Signed-off-by:
-
Sagi Grimberg authored
commit 88c4015f upstream. There are 4 RDMA_CM events that all basically mean that the user should teardown the IB connection: - DISCONNECTED - ADDR_CHANGE - DEVICE_REMOVAL - TIMEWAIT_EXIT Only in DISCONNECTED/ADDR_CHANGE it makes sense to call rdma_disconnect (send DREQ/DREP to our initiator). So we keep the same teardown handler for all of them but only indicate calling rdma_disconnect for the relevant events. This patch also removes redundant debug prints for each single event. v2 changes: - Call isert_disconnected_handler() for DEVICE_REMOVAL (Or + Sag) Signed-off-by:
-
Sagi Grimberg authored
commit 9d49f5e2 upstream. In ungraceful teardowns isert close flows seem racy such that isert_wait_conn hangs as RDMA_CM_EVENT_DISCONNECTED never gets invoked (no one called rdma_disconnect). Both graceful and ungraceful teardowns will have rx flush errors (isert posts a batch once connection is established). Once all flush errors are consumed we invoke isert_wait_conn and it will be responsible for calling rdma_disconnect. This way it can be sure that rdma_disconnect was called and it won't wait forever. This patch also removes the logout_posted indicator. either the logout completion was consumed and no problem decrementing the post_send_buf_count, or it was consumed as a flush error. no point of keeping it for isert_wait_conn as there is no danger that isert_conn will be accidentally removed while it is running. (Drop unnecessary sleep_on_conn_wait_comp check in isert_cq_rx_comp_err - nab) Signed-off-by:
-
Sagi Grimberg authored
commit e346ab34 upstream. In case np_thread state is in RESET/SHUTDOWN/EXIT states, no point for isert to stall there as we may get a hang in case no one will wake it up later. Signed-off-by:
-
Jukka Taimisto authored
commit 8a96f3cd upstream. -[0x01 Introduction We have found a programming error causing a deadlock in Bluetooth subsystem of Linux kernel. The problem is caused by missing release_sock() call when L2CAP connection creation fails due full accept queue. The issue can be reproduced with 3.15-rc5 kernel and is also present in earlier kernels. -[0x02 Details The problem occurs when multiple L2CAP connections are created to a PSM which contains listening socket (like SDP) and left pending, for example, configuration (the underlying ACL link is not disconnected between connections). When L2CAP connection request is received and listening socket is found the l2cap_sock_new_connection_cb() function (net/bluetooth/l2cap_sock.c) is called. This function locks the 'parent' socket and then checks if the accept queue is full. 1178 lock_sock(parent); 1179 1180 /* Check for backlog size */ 1181 if (sk_acceptq_is_full(parent)) { 1182 BT_DBG("backlog full %d", parent->sk_ack_backlog); 1183 return NULL; 1184 } If case the accept queue is full NULL is returned, but the 'parent' socket is not released. Thus when next L2CAP connection request is received the code blocks on lock_sock() since the parent is still locked. Also note that for connections already established and waiting for configuration to complete a timeout will occur and l2cap_chan_timeout() (net/bluetooth/l2cap_core.c) will be called. All threads calling this function will also be blocked waiting for the channel mutex since the thread which is waiting on lock_sock() alread holds the channel mutex. We were able to reproduce this by sending continuously L2CAP connection request followed by disconnection request containing invalid CID. This left the created connections pending configuration. After the deadlock occurs it is impossible to kill bluetoothd, btmon will not get any more data etc. requiring reboot to recover. -[0x03 Fix Releasing the 'parent' socket when l2cap_sock_new_connection_cb() returns NULL seems to fix the issue. Signed-off-by:
Jukka Taimisto <jtt@codenomicon.com> Reported-by:
Tommi Mäkilä <tmakila@codenomicon.com> Signed-off-by:
-
Felipe Balbi authored
commit da64c27d upstream. LDISCs shouldn't call tty->ops->write() from within ->write_wakeup(). ->write_wakeup() is called with port lock taken and IRQs disabled, tty->ops->write() will try to acquire the same port lock and we will deadlock. Acked-by:
Peter Hurley <peter@hurleysoftware.com> Reported-by:
Huang Shijie <b32955@freescale.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Tested-by:
Andreas Bießmann <andreas@biessmann.de> Signed-off-by:
-
Jianguo Wu authored
commit 86f40622 upstream. When enable LPAE and big-endian in a hisilicon board, while specify mem=384M mem=512M@7680M, will get bad page state: Freeing unused kernel memory: 180K (c0466000 - c0493000) BUG: Bad page state in process init pfn:fa442 page:c7749840 count:0 mapcount:-1 mapping: (null) index:0x0 page flags: 0x40000400(reserved) Modules linked in: CPU: 0 PID: 1 Comm: init Not tainted 3.10.27+ #66 [<c000f5f0>] (unwind_backtrace+0x0/0x11c) from [<c000cbc4>] (show_stack+0x10/0x14) [<c000cbc4>] (show_stack+0x10/0x14) from [<c009e448>] (bad_page+0xd4/0x104) [<c009e448>] (bad_page+0xd4/0x104) from [<c009e520>] (free_pages_prepare+0xa8/0x14c) [<c009e520>] (free_pages_prepare+0xa8/0x14c) from [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) [<c009f8ec>] (free_hot_cold_page+0x18/0xf0) from [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) [<c00b5444>] (handle_pte_fault+0xcf4/0xdc8) from [<c00b6458>] (handle_mm_fault+0xf4/0x120) [<c00b6458>] (handle_mm_fault+0xf4/0x120) from [<c0013754>] (do_page_fault+0xfc/0x354) [<c0013754>] (do_page_fault+0xfc/0x354) from [<c0008400>] (do_DataAbort+0x2c/0x90) [<c0008400>] (do_DataAbort+0x2c/0x90) from [<c0008fb4>] (__dabt_usr+0x34/0x40) The bad pfn:fa442 is not system memory(mem=384M mem=512M@7680M), after debugging, I find in page fault handler, will get wrong pfn from pte just after set pte, as follow: do_anonymous_page() { ... set_pte_at(mm, address, page_table, entry); //debug code pfn = pte_pfn(entry); pr_info("pfn:0x%lx, pte:0x%llxn", pfn, pte_val(entry)); //read out the pte just set new_pte = pte_offset_map(pmd, address); new_pfn = pte_pfn(*new_pte); pr_info("new pfn:0x%lx, new pte:0x%llxn", pfn, pte_val(entry)); ... } pfn: 0x1fa4f5, pte:0xc00001fa4f575f new_pfn:0xfa4f5, new_pte:0xc00000fa4f5f5f //new pfn/pte is wrong. The bug is happened in cpu_v7_set_pte_ext(ptep, pte): An LPAE PTE is a 64bit quantity, passed to cpu_v7_set_pte_ext in the r2 and r3 registers. On an LE kernel, r2 contains the LSB of the PTE, and r3 the MSB. On a BE kernel, the assignment is reversed. Unfortunately, the current code always assumes the LE case, leading to corruption of the PTE when clearing/setting bits. This patch fixes this issue much like it has been done already in the cpu_v7_switch_mm case. Signed-off-by:
Jianguo Wu <wujianguo@huawei.com> Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Russell King authored
commit 3683f44c upstream. While debugging the FEC ethernet driver using stacktrace, it was noticed that the stacktraces always begin as follows: [<c00117b4>] save_stack_trace_tsk+0x0/0x98 [<c0011870>] save_stack_trace+0x24/0x28 ... This is because the stack trace code includes the stack frames for itself. This is incorrect behaviour, and also leads to "skip" doing the wrong thing (which is the number of stack frames to avoid recording.) Perversely, it does the right thing when passed a non-current thread. Fix this by ensuring that we have a known constant number of frames above the main stack trace function, and always skip these. Signed-off-by:
-
Olivier Langlois authored
commit 3b35fc81 upstream. timestamps in v4l2 buffers returned to userspace are updated in uvc_video_clock_update() which uses timestamps fetched from uvc_video_clock_decode() by calling unconditionally ktime_get_ts(). Hence setting the module clock param to realtime has no effect before this patch. This has been tested with ffmpeg: ffmpeg -y -f v4l2 -input_format yuyv422 -video_size 640x480 -framerate 30 -i /dev/video0 \ -f alsa -acodec pcm_s16le -ar 16000 -ac 1 -i default \ -c:v libx264 -preset ultrafast \ -c:a libfdk_aac \ out.mkv and inspecting the v4l2 input starting timestamp. Signed-off-by:
Olivier Langlois <olivier@trillion01.com> Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
