- 26 Aug, 2022 7 commits
-
-
David S. Miller authored
Maksym Glubokiy says: ==================== net: prestera: matchall features This patch series extracts matchall rules management out of SPAN API implementation and adds 2 features on top of that: - support for egress traffic (mirred egress action) - proper rule priorities management between matchall and flower ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Maksym Glubokiy authored
matchall rules can be added only to chain 0 and their priorities have limitations: - new matchall ingress rule's priority must be higher (lower value) than any existing flower rule; - new matchall egress rule's priority must be lower (higher value) than any existing flower rule. The opposite works for flower rule adding: - new flower ingress rule's priority must be lower (higher value) than any existing matchall rule; - new flower egress rule's priority must be higher (lower value) than any existing matchall rule. This is a hardware limitation and thus must be properly handled in driver by reporting errors to the user when newly added rule has such a priority that cannot be installed into the hardware. To achieve this, the driver must maintain both min/max matchall priorities for every flower block when user adds/deletes a matchall rule, as well as both min/max flower priorities for chain 0 for every adding/deletion of flower rules for chain 0. Cc: Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by:
Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by:
-
Serhiy Boiko authored
This enables adding matchall rules for egress: tc filter add .. egress .. matchall skip_sw \ action mirred egress mirror dev .. Signed-off-by:Serhiy Boiko <serhiy.boiko@plvision.eu> Signed-off-by:
-
Serhiy Boiko authored
This commit adds more clarity to handling of TC_CLSMATCHALL_REPLACE and TC_CLSMATCHALL_DESTROY events by calling newly added *_mall_*() handlers instead of directly calling SPAN API. This also extracts matchall rules management out of SPAN API since SPAN is a hardware module which is used to implement 'matchall egress mirred' action only. Signed-off-by:
Taras Chornyi <tchornyi@marvell.com> Signed-off-by:
-
Oleksij Rempel authored
Add phylink based ethtool pause configuration Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Oleksij Rempel authored
There are some exotic ax88772 based devices which may require functionality provide by the phylink framework. For example: - US100A20SFP, USB 2.0 auf LWL Converter with SFP Cage - AX88772B USB to 100Base-TX Ethernet (with RMII) demo board, where it is possible to switch between internal PHY and external RMII based connection. So, convert this driver to phylink as soon as possible. Tested with: - AX88772A + internal PHY - AX88772B + external DP83TD510E T1L PHY Signed-off-by:
-
Rob Herring authored
In order to ensure only documented properties are present, node schemas must have unevaluatedProperties or additionalProperties set to false (typically). Add missing properties/$refs as exposed by this addition. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220825192609.1538463-1-robh@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- 25 Aug, 2022 33 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5e ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/Signed-off-by:
-
Uros Bizjak authored
Use try_cmpxchg instead of cmpxchg (*ptr, old, new) == old in napi_if_scheduled_mark_missed. x86 CMPXCHG instruction returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Also, try_cmpxchg implicitly assigns old *ptr value to "old" when cmpxchg fails, enabling further code simplifications. Cc: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/r/20220822143243.2798-1-ubizjak@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from ipsec and netfilter (with one broken Fixes tag). Current release - new code bugs: - dsa: don't dereference NULL extack in dsa_slave_changeupper() - dpaa: fix <1G ethernet on LS1046ARDB - neigh: don't call kfree_skb() under spin_lock_irqsave() Previous releases - regressions: - r8152: fix the RX FIFO settings when suspending - dsa: microchip: keep compatibility with device tree blobs with no phy-mode - Revert "net: macsec: update SCI upon MAC address change." - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367 Previous releases - always broken: - netfilter: conntrack: work around exceeded TCP receive window - ipsec: fix a null pointer dereference of dst->dev on a metadata dst in xfrm_lookup_with_ifid - moxa: get rid of asymmetry in DMA mapping/unmapping - dsa: microchip: make learning configurable and keep it off while standalone - ice: xsk: prohibit usage of non-balanced queue id - rxrpc: fix locking in rxrpc's sendmsg Misc: - another chunk of sysctl data race silencing" * tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits) net: lantiq_xrx200: restore buffer if memory allocation failed net: lantiq_xrx200: fix lock under memory pressure net: lantiq_xrx200: confirm skb is allocated before using net: stmmac: work around sporadic tx issue on link-up ionic: VF initial random MAC address if no assigned mac ionic: fix up issues with handling EAGAIN on FW cmds ionic: clear broken state on generation change rxrpc: Fix locking in rxrpc's sendmsg net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2 MAINTAINERS: rectify file entry in BONDING DRIVER i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter net: Fix a data-race around sysctl_somaxconn. net: Fix a data-race around netdev_unregister_timeout_secs. net: Fix a data-race around gro_normal_batch. net: Fix data-races around sysctl_devconf_inherit_init_net. net: Fix data-races around sysctl_fb_tunnels_only_for_init_net. net: Fix a data-race around netdev_budget_usecs. net: Fix data-races around sysctl_max_skb_frags. net: Fix a data-race around netdev_budget. ... -
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: Remove some unused code This patchset removes code that is not used anymore after the following two commits removed all users: - commit b0d80c01 ("mlxsw: Remove Mellanox SwitchX-2 ASIC support") - commit 9b43fbb8 ("mlxsw: Remove Mellanox SwitchIB ASIC support") ==================== Link: https://lore.kernel.org/r/cover.1661350629.git.petrm@nvidia.comSigned-off-by:
-
Jiri Pirko authored
Function mlxsw_core_port_type_get() is no longer used. So remove it. Signed-off-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Jiri Pirko authored
port_type_set devlink op is no longer used by any mlxsw driver, so remove it. Signed-off-by:
-
Jiri Pirko authored
There are some IB leftovers that are no longer used in the code. So remove them. Signed-off-by:
-
Jakub Kicinski authored
Jiri Pirko says: ==================== net: devlink: sync flash and dev info commands Purpose of this patchset is to introduce consistency between two devlink commands: devlink dev info Shows versions of running default flash target and components. devlink dev flash Flashes default flash target or component name (if specified on cmdline). Currently it is up to the driver what versions to expose and what flash update component names to accept. This is inconsistent. Thankfully, only netdevsim currently using components so it is still time to sanitize this. This patchset makes sure, that devlink.c calls into driver for component flash update only in case the driver exposes the same version name. Example: $ devlink dev info netdevsim/netdevsim10: driver netdevsim versions: running: fw.mgmt 10.20.30 stored: fw.mgmt 10.20.30 $ devlink dev flash netdevsim/netdevsim10 file somefile.bin [fw.mgmt] Preparing to flash [fw.mgmt] Flashing 100% [fw.mgmt] Flash select [fw.mgmt] Flashing done $ devlink dev flash netdevsim/netdevsim10 file somefile.bin component fw.mgmt [fw.mgmt] Preparing to flash [fw.mgmt] Flashing 100% [fw.mgmt] Flash select [fw.mgmt] Flashing done $ devlink dev flash netdevsim/netdevsim10 file somefile.bin component dummy Error: selected component is not supported by this device. ==================== Link: https://lore.kernel.org/r/20220824122011.1204330-1-jiri@resnulli.usSigned-off-by: -
Jiri Pirko authored
Limit the acceptance of component name passed to cmd_flash_update() to match one of the versions returned by info_get(), marked by version type. This makes things clearer and enforces 1:1 mapping between exposed version and accepted flash component. Check VERSION_TYPE_COMPONENT version type during cmd_flash_update() execution by calling info_get() with different "req" context. That causes info_get() to lookup the component name instead of filling-up the netlink message. Remove "UPDATE_COMPONENT" flag which becomes used. Signed-off-by:
-
Jiri Pirko authored
Fix the only component user which is netdevsim. It uses component named "fw.mgmt" in selftests. So add this version to info_get() output with version type component. Signed-off-by:
-
Jiri Pirko authored
Whenever the driver is called by his info_get() op, it may put multiple version names and values to the netlink message. Extend by additional helper devlink_info_version_running/stored_put_ext() that allows to specify a version type that indicates when particular version name represents a flash component. This is going to be used in follow-up patch calling info_get() during flash update command checking if version with this the version type exists. Signed-off-by:
-
Adel Abouchaev authored
Assinging will drop all previous tests. Fixes: b690842d ("selftests/net: test l2 tunnel TOS/TTL inheriting") Signed-off-by:
Adel Abouchaev <adel.abushaev@gmail.com> Reviewed-by:
Shuah Khan <skhan@linuxfoundation.org> Link: https://lore.kernel.org/r/20220824184351.3759862-1-adel.abushaev@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Aleksander Jan Bajkowski says: ==================== net: lantiq_xrx200: fix errors under memory pressure This series fixes issues that can occur in the driver under memory pressure. Situations when the system cannot allocate memory are rare, so the mentioned bugs have been fixed recently. The patches have been tested on a BT Home router with the Lantiq xRX200 chipset. Changelog: v3: - removed netdev_err() log from the first patch v2: - the second patch has been changed, so that under memory pressure situation the driver will not receive packets indefinitely regardless of the NAPI budget, - the third patch has been added. ==================== Link: https://lore.kernel.org/r/20220824215408.4695-1-olek2@wp.plSigned-off-by: -
Aleksander Jan Bajkowski authored
In a situation where memory allocation fails, an invalid buffer address is stored. When this descriptor is used again, the system panics in the build_skb() function when accessing memory. Fixes: 7ea6cd16 ("lantiq: net: fix duplicated skb in rx descriptor ring") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
-
Aleksander Jan Bajkowski authored
When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll function immediately returns an error. This is incorrect for two reasons: * the function terminates without enabling interrupts or scheduling NAPI, * the error code (-ENOMEM) is returned instead of the number of received packets. After the first memory allocation failure occurs, packet reception is locked due to disabled interrupts from DMA.. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver") Signed-off-by:
-
Aleksander Jan Bajkowski authored
xrx200_hw_receive() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. Add a check in case build_skb() failed to allocate and return NULL. Fixes: e0155935 ("net: lantiq_xrx200: convert to build_skb") Reported-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Heiner Kallweit authored
This is a follow-up to the discussion in [0]. It seems to me that at least the IP version used on Amlogic SoC's sometimes has a problem if register MAC_CTRL_REG is written whilst the chip is still processing a previous write. But that's just a guess. Adding a delay between two writes to this register helps, but we can also simply omit the offending second write. This patch uses the second approach and is based on a suggestion from Qi Duan. Benefit of this approach is that we can save few register writes, also on not affected chip versions. [0] https://www.spinics.net/lists/netdev/msg831526.html Fixes: bfab27a1 ("stmmac: add the experimental PCI support") Suggested-by:
Qi Duan <qi.duan@amlogic.com> Suggested-by:
Jerome Brunet <jbrunet@baylibre.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueJakub Kicinski authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e) This series contains updates to ixgbe and i40e drivers. Jake stops incorrect resetting of SYSTIME registers when starting cyclecounter for ixgbe. Sylwester corrects a check on source IP address when validating destination for i40e. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: Fix incorrect address type for IPv6 flow rules ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter ==================== Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: bug fixes These are a couple of maintenance bug fixes for the Pensando ionic networking driver. Mohamed takes care of a "plays well with others" issue where the VF spec is a bit vague on VF mac addresses, but certain customers have come to expect behavior based on other vendor drivers. Shannon addresses a couple of corner cases seen in internal stress testing. ==================== Link: https://lore.kernel.org/r/20220824165051.6185-1-snelson@pensando.ioSigned-off-by:
-
R Mohamed Shah authored
Assign a random mac address to the VF interface station address if it boots with a zero mac address in order to match similar behavior seen in other VF drivers. Handle the errors where the older firmware does not allow the VF to set its own station address. Newer firmware will allow the VF to set the station mac address if it hasn't already been set administratively through the PF. Setting it will also be allowed if the VF has trust. Fixes: fbb39807 ("ionic: support sr-iov operations") Signed-off-by:
R Mohamed Shah <mohamed@pensando.io> Signed-off-by:
Shannon Nelson <snelson@pensando.io> Signed-off-by:
-
Shannon Nelson authored
In looping on FW update tests we occasionally see the FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop waiting for the FW activate step to finsh inside the FW. The firmware is complaining that the done bit is set when a new dev_cmd is going to be processed. Doing a clean on the cmd registers and doorbell before exiting the wait-for-done and cleaning the done bit before the sleep prevents this from occurring. Fixes: fbfb8031 ("ionic: Add hardware init and device commands") Signed-off-by:
-
Shannon Nelson authored
There is a case found in heavy testing where a link flap happens just before a firmware Recovery event and the driver gets stuck in the BROKEN state. This comes from the driver getting interrupted by a FW generation change when coming back up from the link flap, and the call to ionic_start_queues() in ionic_link_status_check() fails. This can be addressed by having the fw_up code clear the BROKEN bit if seen, rather than waiting for a user to manually force the interface down and then back up. Fixes: 9e8eaf84 ("ionic: stop watchdog when in broken state") Signed-off-by:
-
David Howells authored
Fix three bugs in the rxrpc's sendmsg implementation: (1) rxrpc_new_client_call() should release the socket lock when returning an error from rxrpc_get_call_slot(). (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex held in the event that we're interrupted by a signal whilst waiting for tx space on the socket or relocking the call mutex afterwards. Fix this by: (a) moving the unlock/lock of the call mutex up to rxrpc_send_data() such that the lock is not held around all of rxrpc_wait_for_tx_window*() and (b) indicating to higher callers whether we're return with the lock dropped. Note that this means recvmsg() will not block on this call whilst we're waiting. (3) After dropping and regaining the call mutex, rxrpc_send_data() needs to go and recheck the state of the tx_pending buffer and the tx_total_len check in case we raced with another sendmsg() on the same call. Thinking on this some more, it might make sense to have different locks for sendmsg() and recvmsg(). There's probably no need to make recvmsg() wait for sendmsg(). It does mean that recvmsg() can return MSG_EOR indicating that a call is dead before a sendmsg() to that call returns - but that can currently happen anyway. Without fix (2), something like the following can be induced: WARNING: bad unlock balance detected! 5.16.0-rc6-syzkaller #0 Not tainted ------------------------------------- syz-executor011/3597 is trying to release lock (&call->user_mutex) at: [<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 but there are no more locks to release! other info that might help us debug this: no locks held by syz-executor011/3597. ... Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline] __lock_release kernel/locking/lockdep.c:5306 [inline] lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:724 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae [Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this] Fixes: bc5e3a54 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com Signed-off-by:David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com cc: Hawkins Jiawei <yin31149@gmail.com> cc: Khalid Masum <khalid.masum.92@gmail.com> cc: Dan Carpenter <dan.carpenter@oracle.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.ukSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroupLinus Torvalds authored
Pull another cgroup fix from Tejun Heo: "Commit 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") required the cgroup core to grab cpus_read_lock() before invoking ->attach(). Unfortunately, it missed adding cpus_read_lock() in cgroup_attach_task_all(). Fix it" * tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
-
Tetsuo Handa authored
syzbot is hitting percpu_rwsem_assert_held(&cpu_hotplug_lock) warning at cpuset_attach() [1], for commit 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") missed that cpuset_attach() is also called from cgroup_attach_task_all(). Add cpus_read_lock() like what cgroup_procs_write_start() does. Link: https://syzkaller.appspot.com/bug?extid=29d3a3b4d86c8136ad9e [1] Reported-by:
syzbot <syzbot+29d3a3b4d86c8136ad9e@syzkaller.appspotmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Fixes: 4f7e7236 ("cgroup: Fix threadgroup_rwsem <-> cpus_read_lock() deadlock") Signed-off-by:
Tejun Heo <tj@kernel.org>
-
Zhengchao Shao authored
qdisc_reset() is clearing qdisc->q.qlen and qdisc->qstats.backlog _after_ calling qdisc->ops->reset. There is no need to clear them again in the specific reset function. Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220824005231.345727-1-shaozhengchao@huawei.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Lorenzo Bianconi authored
Properly report hw rx hash for mt7986 chipset accroding to the new dma descriptor layout. Fixes: 197c9e9b ("net: ethernet: mtk_eth_soc: introduce support for mt7986 chipset") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://lore.kernel.org/r/091394ea4e705fbb35f828011d98d0ba33808f69.1661257293.git.lorenzo@kernel.orgSigned-off-by:
-
Wenjuan Geng authored
is_post_ct_flow() function will process only ct_state ESTABLISHED, then offload_pre_check() function will check FLOW_DISSECTOR_KEY_CT flag. When config tc filter match ct_state(0/0x3f), dissector->used_keys with FLOW_DISSECTOR_KEY_CT bit, function offload_pre_check() will return false, so not offload. This is a special case that can be handled safely. Therefore, modify to let initial packet which won't go through conntrack can be offloaded, as long as the cared ct fields are all zero. Signed-off-by:
Wenjuan Geng <wenjuan.geng@corigine.com> Reviewed-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20220823090122.403631-1-simon.horman@corigine.comSigned-off-by:
-
Richard Gobert authored
Introduce a simple helper function to replace a common pattern. When accessing the GRO header, we fetch the pointer from frag0, then test its validity and fetch it from the skb when necessary. This leads to the pattern skb_gro_header_fast -> skb_gro_header_hard -> skb_gro_header_slow recurring many times throughout GRO code. This patch replaces these patterns with a single inlined function call, improving code readability. Signed-off-by:
Richard Gobert <richardbgobert@gmail.com> Reviewed-by:
-
Jiri Pirko authored
As all callbacks are converted now, fix the text reflecting that change. Suggested-by:
-
Jakub Kicinski authored
Joanne Koong says: ==================== Add a second bind table hashed by port and address Currently, there is one bind hashtable (bhash) that hashes by port only. This patchset adds a second bind table (bhash2) that hashes by port and address. The motivation for adding bhash2 is to expedite bind requests in situations where the port has many sockets in its bhash table entry (eg a large number of sockets bound to different addresses on the same port), which makes checking bind conflicts costly especially given that we acquire the table entry spinlock while doing so, which can cause softirq cpu lockups and can prevent new tcp connections. We ran into this problem at Meta where the traffic team binds a large number of IPs to port 443 and the bind() call took a significant amount of time which led to cpu softirq lockups, which caused packet drops and other failures on the machine. When experimentally testing this on a local server for ~24k sockets bound to the port, the results seen were: ipv4: before - 0.002317 seconds with bhash2 - 0.000020 seconds ipv6: before - 0.002431 seconds with bhash2 - 0.000021 seconds The additions to the initial bhash2 submission [0] are: * Updating bhash2 in the cases where a socket's rcv saddr changes after it has * been bound * Adding locks for bhash2 hashbuckets [0] https://lore.kernel.org/netdev/20220520001834.2247810-1-kuba@kernel.org/ v3: https://lore.kernel.org/netdev/20220722195406.1304948-2-joannelkoong@gmail.com/ v2: https://lore.kernel.org/netdev/20220712235310.1935121-1-joannelkoong@gmail.com/ v1: https://lore.kernel.org/netdev/20220623234242.2083895-2-joannelkoong@gmail.com/ ==================== Link: https://lore.kernel.org/r/20220822181023.3979645-1-joannelkoong@gmail.comSigned-off-by:
-
Joanne Koong authored
This patch adds 2 new tests: sk_bind_sendto_listen and sk_connect_zero_addr. The sk_bind_sendto_listen test exercises the path where a socket's rcv saddr changes after it has been added to the binding tables, and then a listen() on the socket is invoked. The listen() should succeed. The sk_bind_sendto_listen test is copied over from one of syzbot's tests: https://syzkaller.appspot.com/x/repro.c?x=1673a38df00000 The sk_connect_zero_addr test exercises the path where the socket was never previously added to the binding tables and it gets assigned a saddr upon a connect() to address 0. Signed-off-by:
Joanne Koong <joannelkoong@gmail.com> Signed-off-by:
-
Joanne Koong authored
This test populates the bhash table for a given port with MAX_THREADS * MAX_CONNECTIONS sockets, and then times how long a bind request on the port takes. When populating the bhash table, we create the sockets and then bind the sockets to the same address and port (SO_REUSEADDR and SO_REUSEPORT are set). When timing how long a bind on the port takes, we bind on a different address without SO_REUSEPORT set. We do not set SO_REUSEPORT because we are interested in the case where the bind request does not go through the tb->fastreuseport path, which is fragile (eg tb->fastreuseport path does not work if binding with a different uid). To run the script: Usage: ./bind_bhash.sh [-6 | -4] [-p port] [-a address] 6: use ipv6 4: use ipv4 port: Port number address: ip address Without any arguments, ./bind_bhash.sh defaults to ipv6 using ip address "2001:0db8:0:f101::1" on port 443. On my local machine, I see: ipv4: before - 0.002317 seconds with bhash2 - 0.000020 seconds ipv6: before - 0.002431 seconds with bhash2 - 0.000021 seconds Signed-off-by:
-
