- 12 Apr, 2022 1 commit
-
-
Richard Fitzgerald authored
For wmfw format v2 and later the coefficient name strings have a length field and are NOT null-terminated. Use kasprintf() to convert the unterminated string into a null-terminated string in an allocated buffer. The previous code handled this duplication incorrectly using kmemdup() and getting the length from a strlen() of the (unterminated) source string. This resulted in creating a string that continued up to the next byte in the firmware file that just happened to be 0x00. Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: f6bc909e ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs") Link: https://lore.kernel.org/r/20220412163927.1303470-1-rf@opensource.cirrus.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 08 Apr, 2022 2 commits
-
-
Christophe JAILLET authored
After a successful lpass_macro_pds_init() call, lpass_macro_pds_exit() must be called. Add the missing call in the error handling path of the probe function and use it. Fixes: 9e3d83c5 ("ASoC: codecs: Add power domains support in digital macro codecs") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/5b5a015a9b1dc8011c6a4053fa49da1f2531e47c.1648969065.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
Mark Brown authored
Merge series from Mauro Carvalho Chehab <mchehab@kernel.org>: Huawei Matebook D15 uses two different GPIOs are used to control the output: - gpio0 controls the speaker output; - gpio1 controls the headphone output. Changing both at the same time cause spurious events that are mis-interpreted as input events, causing troubles on apps. So, a delay is needed before turning on such gpios. Also, the headset microphone is connected to MIC1, instead of MIC2 port. With this patch, plugging a headphone causes a jack event to trigger the speaker supply, powering down the speaker and powering up the headphone output. Removing the headphone also triggers the power supply, powering up the speaker and powering down the headphone. The headset microphone also works.
-
- 07 Apr, 2022 10 commits
-
-
Mauro Carvalho Chehab authored
Based on experimental tests, Huawei Matebook D15 actually uses both gpio0 and gpio1: the first one controls the speaker, while the other one controls the headphone. Also, the headset is mapped as MIC1, instead of MIC2. So, add a quirk for it. Signed-off-by:
Mauro Carvalho Chehab <mchehab@kernel.org> Acked-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/d678aef9fc9a07aced611aa7cb8c9b800c649e5a.1649357263.git.mchehab@kernel.orgSigned-off-by:
-
Mauro Carvalho Chehab authored
The headset/internal mic can either be routed as mic1/mic2 or vice-versa. By default, the driver assumes that the headset is mapped as mic2, but not all devices map this way. So, add a quirk to support changing it to mic1, using mic2 for the internal analog mic (if any). Signed-off-by:
-
Mauro Carvalho Chehab authored
Some devices may use both gpio0 and gpio1 to independently switch the speaker and the headphone. Add support for that. Acked-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Pierre-Louis Bossart authored
In preparation for the support of an additional gpio for headphone control, rename GPIOs to make explicit references to speakers and gpio0 or gpio1. No functionality change. Signed-off-by:
-
Zheyu Ma authored
When the driver fails during probing, the driver should disable the regulator, not just handle it in wm8731_hw_init(). The following log reveals it: [ 17.812483] WARNING: CPU: 1 PID: 364 at drivers/regulator/core.c:2257 _regulator_put+0x3ec/0x4e0 [ 17.815958] RIP: 0010:_regulator_put+0x3ec/0x4e0 [ 17.824467] Call Trace: [ 17.824774] <TASK> [ 17.825040] regulator_bulk_free+0x82/0xe0 [ 17.825514] devres_release_group+0x319/0x3d0 [ 17.825882] i2c_device_probe+0x766/0x940 [ 17.829198] i2c_register_driver+0xb5/0x130 Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Link: https://lore.kernel.org/r/20220405121038.4094051-1-zheyuma97@gmail.comSigned-off-by:
-
Chao Song authored
The left speaker of max98373 uses spk_r_endpoint, and right speaker uses spk_l_endpoint, this is obviously wrong. This patch corrects the endpoints for max98373 codec. Signed-off-by:
Chao Song <chao.song@linux.intel.com> Signed-off-by:
-
Srinivas Kandagatla authored
SIDO(Single-Inductor Dual-Ouput) Buck powers up both analog and digital circuits along with internal memory, powering off this is the last thing that codec should do when going to very low power. Current code was powering off this Buck if there are no users of sysclk, which is not correct. Powering off this buck will result in no register access. This code path was never tested until recently after adding pm support in SoundWire controller. Fix this by removing the buck poweroff when the codec is active and also the code that is not used. Without this patch all the read/write transactions will never complete and results in SLIMBus Errors like: qcom,slim-ngd qcom,slim-ngd.1: Tx:MT:0x0, MC:0x60, LA:0xcf failed:-110 wcd934x-codec wcd934x-codec.1.auto: ASoC: error at soc_component_read_no_lock on wcd934x-codec.1.auto for register: [0x00000d05] -110 qcom,slim-ngd-ctrl 171c0000.slim: Error Interrupt received 0x82000000 Reported-by:
Amit Pundir <amit.pundir@linaro.org> Fixes: a61f3b4f ("ASoC: wcd934x: add support to wcd9340/wcd9341 codec") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
-
Yu Liao authored
scontrol doesn't get freed when kstrdup returns NULL. Fix by free iscontrol in that case. scontrol = kzalloc(sizeof(*scontrol), GFP_KERNEL); if (!scontrol) return -ENOMEM; scontrol->name = kstrdup(hdr->name, GFP_KERNEL); if (!scontrol->name) return -ENOMEM; Signed-off-by:Yu Liao <liaoyu15@huawei.com> Link: https://lore.kernel.org/r/20220318021616.2599630-1-liaoyu15@huawei.comSigned-off-by:
-
Pierre-Louis Bossart authored
We set the cpu_dai capture_ or playback_widget on widget_ready but never clear them, which leads to failures when unloading/reloading a topology in modprobe/rmmod tests BugLink: https://github.com/thesofproject/linux/issues/3535 Fixes: 311ce4fe ("ASoC: SOF: Add support for loading topologies") Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20220406191606.254576-1-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
This patch takes a defensive programming and paranoid approach in case the parent device (SoundWire) is pm_runtime resumed but the rt711 device is not. In that case, during the attachment and initialization, a jack detection workqueue can be scheduled. Since the pm_runtime suspend routines will not be invoked, the sequence to cancel all deferred work is not executed, and the jack detection could happen after the bus stops operating, leading to a timeout. This patch applies the same solution to rt5682, based on the similarities between codec drivers. The race condition with rt5682 was not detected experimentally though. BugLink: https://github.com/thesofproject/linux/issues/3459Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
- 06 Apr, 2022 4 commits
-
-
Ajye Huang authored
Follow Intel's design to replace max98360a amp SSP2 reather than SSP1 by judging DMI_OEM_STRING in sof_rt5682_quirk_table struct. And reusing max98357's topology since DAI setting could be leveraged. Signed-off-by:
Ajye Huang <ajye_huang@compal.corp-partner.google.com> Acked-by:
-
Ahmad Fatoum authored
Refactoring in commit a50b7926 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support") led to the bypass never happening as (ratio = 1) was caught in the existing if (ratio & 1) continue; check. The correct check sequence instead is: - skip all ratios lower than one and higher than 512 - skip all odd ratios except for 1:1 - skip 1:1 ratio if and only if !support_1_1_ratio And for all others, calculate the appropriate divider. Adjust the code to facilitate this. Fixes: a50b7926 ("ASoC: fsl_sai: implement 1:1 bclk:mclk ratio support") Signed-off-by:
Ahmad Fatoum <a.fatoum@pengutronix.de> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Reviewed-by:
Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220405155731.745413-1-a.fatoum@pengutronix.deSigned-off-by:
-
Richard Fitzgerald authored
Don't dereference simple_dai before it has been checked for NULL. Signed-off-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20220404113252.1152659-1-rf@opensource.cirrus.comSigned-off-by:
-
Mark Brown authored
Merge series from Heiner Kallweit <hkallweit1@gmail.com>: On a S905W-based system I get the following error: debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present! Turned out that multiple components having the same name triggers this error in soc_init_component_debugfs(). The proposed solution allows other drivers to adopt the same approach with minimal effort. With the patch the error is gone and that's the debugfs entries. /sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller
-
- 05 Apr, 2022 8 commits
-
-
Heiner Kallweit authored
On a S905W-based system I get the following error: debugfs: Directory 'c1105400.audio-controller' with parent 'P230-Q200' already present! Turned out that multiple components having the same name triggers this error in soc_init_component_debugfs(). With the patch the error is gone and that's the debugfs entries. /sys/kernel/debug/asoc/P230-Q200/acodec:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/hdmi:c1105400.audio-controller /sys/kernel/debug/asoc/P230-Q200/cpu:c1105400.audio-controller Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/38053baf-c33b-7fdf-7593-99b22153a9c0@gmail.comSigned-off-by:
-
Heiner Kallweit authored
Allow the component debugfs_prefix to be set from snd_soc_component_driver. First use case is avoiding a duplicate debugfs entry error in case a device has multiple components which have the same name therefore. Note that we don't set component->debugfs_prefix if it's set already. That's needed because partially component->debugfs_prefix is set before calling snd_soc_component_initialize(). Signed-off-by:
-
Miaoqian Lin authored
devm_snd_soc_register_component() may fails, we should check the error and do the corresponding error handling. Fixes: 150db8c5 ("ASoC: codecs: Add msm8916-wcd digital codec") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220403115239.30140-1-linmq006@gmail.comSigned-off-by:
-
Miaoqian Lin authored
We need to call clk_put() to undo clk_get() in the error path. Use devm_clk_get() to obtain a reference to the clock, It has the benefit that clk_put() is no longer required. Fixes: 0d6a04da ("ASoC: Add Rockchip rk817 audio CODEC support") Signed-off-by:
-
Hui Wang authored
We enabled UBSAN in the ubuntu kernel, and the cs35l41 driver triggers a warning calltrace like below: cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 8, word_offset=23, bit_sum mod 32=0, otp_map[i].size = 24 cs35l41-hda i2c-CSC3551:00-cs35l41-hda.0: bitoffset= 0, word_offset=24, bit_sum mod 32=24, otp_map[i].size = 0 ================================================================================ UBSAN: shift-out-of-bounds in linux-kernel-src/sound/soc/codecs/cs35l41-lib.c:836:8 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 10 PID: 595 Comm: systemd-udevd Not tainted 5.15.0-23-generic #23 Hardware name: LENOVO \x02MFG_IN_GO/\x02MFG_IN_GO, BIOS N3GET19W (1.00 ) 03/11/2022 Call Trace: <TASK> show_stack+0x52/0x58 dump_stack_lvl+0x4a/0x5f dump_stack+0x10/0x12 ubsan_epilogue+0x9/0x45 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xef ? regmap_unlock_mutex+0xe/0x10 cs35l41_otp_unpack.cold+0x1c6/0x2b2 [snd_soc_cs35l41_lib] cs35l41_hda_probe+0x24f/0x33a [snd_hda_scodec_cs35l41] cs35l41_hda_i2c_probe+0x65/0x90 [snd_hda_scodec_cs35l41_i2c] When both bitoffset and otp_map[i].size are 0, the line 836 will result in GENMASK(-1, 0), this triggers the shift-out-of-bounds calltrace. Here add a checking, if both bitoffset and otp_map[i].size are 0, do not run GENMASK() and directly set otp_val to 0, this will not bring any function change on the driver but could avoid the calltrace. Signed-off-by:
Hui Wang <hui.wang@canonical.com> Link: https://lore.kernel.org/r/20220324081839.62009-2-hui.wang@canonical.comSigned-off-by:
-
Hui Wang authored
otp_map[].size is a key variable to compute the value of otp_val and to update the bit_offset, it is helpful to debug if could put it in the debug log. Signed-off-by:
Lucas Tanure <tanureal@opensource.cirrus.com> Link: https://lore.kernel.org/r/20220324081839.62009-1-hui.wang@canonical.comSigned-off-by:
-
Xiaomeng Tong authored
The bug is here: if (!dai) { The list iterator value 'dai' will *always* be set and non-NULL by for_each_component_dais(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found (In fact, it will be a bogus pointer to an invalid struct object containing the HEAD). Otherwise it will bypass the check 'if (!dai) {' (never call dev_err() and never return -ENODEV;) and lead to invalid memory access lately when calling 'rt5682_set_bclk1_ratio(dai, factor);'. To fix the bug, just return rt5682_set_bclk1_ratio(dai, factor); when found the 'dai', otherwise dev_err() and return -ENODEV; Cc: stable@vger.kernel.org Fixes: ebbfabc1 ("ASoC: rt5682: Add CCF usage for providing I2S clks") Signed-off-by:Xiaomeng Tong <xiam0nd.tong@gmail.com> Link: https://lore.kernel.org/r/20220327081002.12684-1-xiam0nd.tong@gmail.comSigned-off-by:
-
Xiaomeng Tong authored
These two bug are here: list_for_each_entry_safe_continue(w, n, list, power_list); list_for_each_entry_safe_continue(w, n, list, power_list); After the list_for_each_entry_safe_continue() exits, the list iterator will always be a bogus pointer which point to an invalid struct objdect containing HEAD member. The funciton poniter 'w->event' will be a invalid value which can lead to a control-flow hijack if the 'w' can be controlled. The original intention was to continue the outer list_for_each_entry_safe() loop with the same entry if w->event is NULL, but misunderstanding the meaning of list_for_each_entry_safe_continue(). So just add a 'continue;' to fix the bug. Cc: stable@vger.kernel.org Fixes: 163cac06 ("ASoC: Factor out DAPM sequence execution") Signed-off-by:
-
- 04 Apr, 2022 5 commits
-
-
Christophe JAILLET authored
At the kzalloc() call in dpcm_be_connect(), there is no spin lock involved. It's merely protected by card->pcm_mutex, instead. The spinlock is applied at the later call with snd_soc_pcm_stream_lock_irq() only for the list manipulations. (See it's *_irq(), not *_irqsave(); that means the context being sleepable at that point.) So, we can use GFP_KERNEL safely there. This patch revert commit d8a9c6e1 ("ASoC: soc-pcm: use GFP_ATOMIC for dpcm structure") which is no longer needed since commit b7898396 ("ASoC: soc-pcm: Fix and cleanup DPCM locking"). Signed-off-by:
-
Peter Ujfalusi authored
The scontrol->name is allocated with kstrdup, it must be freed before the scontrol is freed to avoid leaking memory. The constant leaking happens via sof_widget_unload() path on every module removal. Fixes: b5cee8fe ("ASoC: SOF: topology: Make control parsing IPC agnostic") Signed-off-by:
-
Xiaomeng Tong authored
The bug is here: if (!dai) { The list iterator value 'dai' will *always* be set and non-NULL by for_each_component_dais(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found (In fact, it will be a bogus pointer to an invalid struct object containing the HEAD). Otherwise it will bypass the check 'if (!dai) {' (never call dev_err() and never return -ENODEV;) and lead to invalid memory access lately when calling 'rt5682s_set_bclk1_ratio(dai, factor);'. To fix the bug, just return rt5682s_set_bclk1_ratio(dai, factor); when found the 'dai', otherwise dev_err() and return -ENODEV; Cc: stable@vger.kernel.org Fixes: bdd229ab ("ASoC: rt5682s: Add driver for ALC5682I-VS codec") Signed-off-by: -
Peter Ujfalusi authored
Academic correction of error handling: In case the allocation of kc or kcontrol_type fails the correct label to jump is hdr_err since the template.sname has been also allocated at this point. Fixes: d29d41e2 ("ASoC: topology: Add support for multiple kcontrol types to a widget") Signed-off-by:
-
Mark Brown authored
The MCLK of the WM8731 on the AT91SAM9G20-EK board is connected to the PCK0 output of the SoC, intended in the reference software to be supplied using PLLB and programmed to 12MHz. As originally written for use with a board file the audio driver was responsible for configuring the entire tree but in the conversion to the common clock framework the registration of the named pck0 and pllb clocks was removed so the driver has failed to instantiate ever since. Since the WM8731 driver has had support for managing a MCLK provided via the common clock framework for some time we can simply drop all the clock management code from the machine driver other than configuration of the sysclk rate, the CODEC driver still respects that configuration from the machine driver. Fixes: ff78a189 ("ARM: at91: remove old at91-specific clock driver") Signed-off-by:
Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20220325154241.1600757-2-broonie@kernel.org
-
- 03 Apr, 2022 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull more tracing updates from Steven Rostedt: - Rename the staging files to give them some meaning. Just stage1,stag2,etc, does not show what they are for - Check for NULL from allocation in bootconfig - Hold event mutex for dyn_event call in user events - Mark user events to broken (to work on the API) - Remove eBPF updates from user events - Remove user events from uapi header to keep it from being installed. - Move ftrace_graph_is_dead() into inline as it is called from hot paths and also convert it into a static branch. * tag 'trace-v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Move user_events.h temporarily out of include/uapi ftrace: Make ftrace_graph_is_dead() a static branch tracing: Set user_events to BROKEN tracing/user_events: Remove eBPF interfaces tracing/user_events: Hold event_mutex during dyn_event_add proc: bootconfig: Add null pointer check tracing: Rename the staging files for trace_events
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull clk fix from Stephen Boyd: "A single revert to fix a boot regression seen when clk_put() started dropping rate range requests. It's best to keep various systems booting so we'll kick this out and try again next time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: Revert "clk: Drop the rate range on clk_put()"
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Thomas Gleixner: "A set of x86 fixes and updates: - Make the prctl() for enabling dynamic XSTATE components correct so it adds the newly requested feature to the permission bitmap instead of overwriting it. Add a selftest which validates that. - Unroll string MMIO for encrypted SEV guests as the hypervisor cannot emulate it. - Handle supervisor states correctly in the FPU/XSTATE code so it takes the feature set of the fpstate buffer into account. The feature sets can differ between host and guest buffers. Guest buffers do not contain supervisor states. So far this was not an issue, but with enabling PASID it needs to be handled in the buffer offset calculation and in the permission bitmaps. - Avoid a gazillion of repeated CPUID invocations in by caching the values early in the FPU/XSTATE code. - Enable CONFIG_WERROR in x86 defconfig. - Make the X86 defconfigs more useful by adapting them to Y2022 reality" * tag 'x86-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/xstate: Consolidate size calculations x86/fpu/xstate: Handle supervisor states in XSTATE permissions x86/fpu/xsave: Handle compacted offsets correctly with supervisor states x86/fpu: Cache xfeature flags from CPUID x86/fpu/xsave: Initialize offset/size cache early x86/fpu: Remove unused supervisor only offsets x86/fpu: Remove redundant XCOMP_BV initialization x86/sev: Unroll string mmio with CC_ATTR_GUEST_UNROLL_STRING_IO x86/config: Make the x86 defconfigs a bit more usable x86/defconfig: Enable WERROR selftests/x86/amx: Update the ARCH_REQ_XCOMP_PERM test x86/fpu/xstate: Fix the ARCH_REQ_XCOMP_PERM implementation -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull RT signal fix from Thomas Gleixner: "Revert the RT related signal changes. They need to be reworked and generalized" * tag 'core-urgent-2022-04-03' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "signal, x86: Delay calling signals in atomic on RT enabled kernels"
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull more dma-mapping updates from Christoph Hellwig: - fix a regression in dma remap handling vs AMD memory encryption (me) - finally kill off the legacy PCI DMA API (Christophe JAILLET) * tag 'dma-mapping-5.18-1' of git://git.infradead.org/users/hch/dma-mapping: dma-mapping: move pgprot_decrypted out of dma_pgprot PCI/doc: cleanup references to the legacy PCI DMA API PCI: Remove the deprecated "pci-dma-compat.h" API
-
git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: - avoid unnecessary rebuilds for library objects - fix return value of __setup handlers - fix invalid input check for "crashkernel=" kernel option - silence KASAN warnings in unwind_frame * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9191/1: arm/stacktrace, kasan: Silence KASAN warnings in unwind_frame() ARM: 9190/1: kdump: add invalid input check for 'crashkernel=0' ARM: 9187/1: JIVE: fix return value of __setup handler ARM: 9189/1: decompressor: fix unneeded rebuilds of library objects
-
Stephen Boyd authored
This reverts commit 7dabfa2b. There are multiple reports that this breaks boot on various systems. The common theme is that orphan clks are having rates set on them when that isn't expected. Let's revert it out for now so that -rc1 boots. Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reported-by:
Tony Lindgren <tony@atomide.com> Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Reported-by:
Naresh Kamboju <naresh.kamboju@linaro.org> Link: https://lore.kernel.org/r/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com Cc: Maxime Ripard <maxime@cerno.tech> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220403022818.39572-1-sboyd@kernel.org
-
- 02 Apr, 2022 2 commits
-
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Avoid SEGV if core.cpus isn't set in 'perf stat'. - Stop depending on .git files for building PERF-VERSION-FILE, used in 'perf --version', fixing some perf tools build scenarios. - Convert tracepoint.py example to python3. - Update UAPI header copies from the kernel sources: socket, mman-common, msr-index, KVM, i915 and cpufeatures. - Update copy of libbpf's hashmap.c. - Directly return instead of using local ret variable in evlist__create_syswide_maps(), found by coccinelle. * tag 'perf-tools-for-v5.18-2022-04-02' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf python: Convert tracepoint.py example to python3 perf evlist: Directly return instead of using local ret variable perf cpumap: More cpu map reuse by merge. perf cpumap: Add is_subset function perf evlist: Rename cpus to user_requested_cpus perf tools: Stop depending on .git files for building PERF-VERSION-FILE tools headers cpufeatures: Sync with the kernel sources tools headers UAPI: Sync drm/i915_drm.h with the kernel sources tools headers UAPI: Sync linux/kvm.h with the kernel sources tools kvm headers arm64: Update KVM headers from the kernel sources tools arch x86: Sync the msr-index.h copy with the kernel sources tools headers UAPI: Sync asm-generic/mman-common.h with the kernel perf beauty: Update copy of linux/socket.h with the kernel sources perf tools: Update copy of libbpf's hashmap.c perf stat: Avoid SEGV if core.cpus isn't set
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix empty $(PYTHON) expansion. - Fix UML, which got broken by the attempt to suppress Clang warnings. - Fix warning message in modpost. * tag 'kbuild-fixes-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: modpost: restore the warning message for missing symbol versions Revert "um: clang: Strip out -mno-global-merge from USER_CFLAGS" kbuild: Remove '-mno-global-merge' kbuild: fix empty ${PYTHON} in scripts/link-vmlinux.sh kconfig: remove stale comment about removed kconfig_print_symbol()
-
