- 13 Feb, 2014 40 commits
-
-
John Stultz authored
commit 5258d3f2 upstream. In 780427f0 (Indicate that clock was set in the pvclock gtod notifier), logic was added to pass a CLOCK_WAS_SET notification to the pvclock notifier chain. While that patch added a action flag returned from accumulate_nsecs_to_secs(), it only uses the returned value in one location, and not in the logarithmic accumulation. This means if a leap second triggered during the logarithmic accumulation (which is most likely where it would happen), the notification that the clock was set would not make it to the pv notifiers. This patch extends the logarithmic_accumulation pass down that action flag so proper notification will occur. This patch also changes the varialbe action -> clock_set per Ingo's suggestion. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: <xen-devel@lists.xen.org> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
John Stultz authored
commit f55c0760 upstream. Since 48cdc135 (Implement a shadow timekeeper), we have to call timekeeping_update() after any adjustment to the timekeeping structure in order to make sure that any adjustments to the structure persist. Unfortunately, the updates to the tai offset via adjtimex do not trigger this update, causing adjustments to the tai offset to be made and then over-written by the previous value at the next update_wall_time() call. This patch resovles the issue by calling timekeeping_update() right after setting the tai offset. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 23a8e844 upstream. Doing some different tests, I discovered that function graph tracing, when filtered via the set_ftrace_filter and set_ftrace_notrace files, does not always keep with them if another function ftrace_ops is registered to trace functions. The reason is that function graph just happens to trace all functions that the function tracer enables. When there was only one user of function tracing, the function graph tracer did not need to worry about being called by functions that it did not want to trace. But now that there are other users, this becomes a problem. For example, one just needs to do the following: # cd /sys/kernel/debug/tracing # echo schedule > set_ftrace_filter # echo function_graph > current_tracer # cat trace [..] 0) | schedule() { ------------------------------------------ 0) <idle>-0 => rcu_pre-7 ------------------------------------------ 0) ! 2980.314 us | } 0) | schedule() { ------------------------------------------ 0) rcu_pre-7 => <idle>-0 ------------------------------------------ 0) + 20.701 us | } # echo 1 > /proc/sys/kernel/stack_tracer_enabled # cat trace [..] 1) + 20.825 us | } 1) + 21.651 us | } 1) + 30.924 us | } /* SyS_ioctl */ 1) | do_page_fault() { 1) | __do_page_fault() { 1) 0.274 us | down_read_trylock(); 1) 0.098 us | find_vma(); 1) | handle_mm_fault() { 1) | _raw_spin_lock() { 1) 0.102 us | preempt_count_add(); 1) 0.097 us | do_raw_spin_lock(); 1) 2.173 us | } 1) | do_wp_page() { 1) 0.079 us | vm_normal_page(); 1) 0.086 us | reuse_swap_page(); 1) 0.076 us | page_move_anon_rmap(); 1) | unlock_page() { 1) 0.082 us | page_waitqueue(); 1) 0.086 us | __wake_up_bit(); 1) 1.801 us | } 1) 0.075 us | ptep_set_access_flags(); 1) | _raw_spin_unlock() { 1) 0.098 us | do_raw_spin_unlock(); 1) 0.105 us | preempt_count_sub(); 1) 1.884 us | } 1) 9.149 us | } 1) + 13.083 us | } 1) 0.146 us | up_read(); When the stack tracer was enabled, it enabled all functions to be traced, which now the function graph tracer also traces. This is a side effect that should not occur. To fix this a test is added when the function tracing is changed, as well as when the graph tracer is enabled, to see if anything other than the ftrace global_ops function tracer is enabled. If so, then the graph tracer calls a test trampoline that will look at the function that is being traced and compare it with the filters defined by the global_ops. As an optimization, if there's no other function tracers registered, or if the only registered function tracers also use the global ops, the function graph infrastructure will call the registered function graph callback directly and not go through the test trampoline. Fixes: d2d45c7a "tracing: Have stack_tracer use a separate list of functions" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit a4c35ed2 upstream. The synchronization needed after ftrace_ops are unregistered must happen after the callback is disabled from becing called by functions. The current location happens after the function is being removed from the internal lists, but not after the function callbacks were disabled, leaving the functions susceptible of being called after their callbacks are freed. This affects perf and any externel users of function tracing (LTTng and SystemTap). Fixes: cdbe61bf "ftrace: Allow dynamically allocated function tracers" Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 405e1d83 upstream. ftrace_trace_function is a variable that holds what function will be called directly by the assembly code (mcount). If just a single function is registered and it handles recursion itself, then the assembly will call that function directly without any helper function. It also passes in the ftrace_op that was registered with the callback. The ftrace_op to send is stored in the function_trace_op variable. The ftrace_trace_function and function_trace_op needs to be coordinated such that the called callback wont be called with the wrong ftrace_op, otherwise bad things can happen if it expected a different op. Luckily, there's no callback that doesn't use the helper functions that requires this. But there soon will be and this needs to be fixed. Use a set_function_trace_op to store the ftrace_op to set the function_trace_op to when it is safe to do so (during the update function within the breakpoint or stop machine calls). Or if dynamic ftrace is not being used (static tracing) then we have to do a bit more synchronization when the ftrace_trace_function is set as that takes affect immediately (as oppose to dynamic ftrace doing it with the modification of the trampoline). Signed-off-by:
-
Dave Airlie authored
commit 8b7ad1bb upstream. I totally sign inverted my way out of this one. Reported-by:
"Sabrina Dubroca" <sd@queasysnail.net> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
commit ec22b4aa upstream. mode->mdev otherwise the bw limits never kick in. Reported in RHEL testing. Signed-off-by:
-
Dave Airlie authored
commit 53dac830 upstream. In some cases we enter the cursor code with file_priv = NULL causing an oops, we also can try to unpin something that isn't pinned, and this is a good fix for it. Signed-off-by:
-
Thomas Hellstrom authored
drm/vmwgfx: Fix regression caused by "drm/ttm: make ttm reservation calls behave like reservation calls" commit cf5e3413 upstream. The call to ttm_eu_backoff_reservation() as part of an error path would cause a lock imbalance if the reservation ticket was not initialized. This error is easily triggered from user-space by submitting a bogus command stream. Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Cc: Maarten Lankhorst <maarten.lankhorst@canonical.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Dave Airlie authored
commit f4b4718b upstream. these 3 were checking in_interrupt but we have situations where calling vunmap under this could cause a BUG to be hit in smp_call_function_many. Use the drm_can_sleep macro instead, which should stop this path from been taken in this case. Signed-off-by:
-
Patrik Jakobsson authored
commit 631794b4 upstream. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=64361Signed-off-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Laurent Pinchart authored
commit eb86301f upstream. When setting a new frame buffer with the mode set base operation the pitch value might change. Set the hardware plane pitch register at the same time as the plane base address in the rcar_du_plane_update_base() function to make sure the pitch value always matches the frame buffer. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by:
-
Daniel Vetter authored
commit 6ab11a26 upstream. At least drm/i915 expects that the obj->dev pointer is set even in failure paths. Specifically when the shmem initialization fails we call i915_gem_object_free which needs to deref obj->base.dev to get at the slab pointer in the device private structure. And the shmem allocation can easily fail when userspace is hitting open file limits. Doing the structure init even when the shmem file allocation fails prevents this Oops. This is a regression from commit 89c8233f Author: David Herrmann <dh.herrmann@gmail.com> Date: Thu Jul 11 11:56:32 2013 +0200 drm/gem: simplify object initialization v2: Add regression note which Chris supplied. Testcase: igt/gem_fd_exhaustion Reported-and-Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> References: http://lists.freedesktop.org/archives/intel-gfx/2014-January/038433.htmlReviewed-by:
David Herrmann <dh.herrmann@gmail.com> Cc: David Herrmann <dh.herrmann@gmail.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Takashi Iwai authored
commit 2510538f upstream. When the mode is set with 16bpp on QEMU, the output gets totally broken. The culprit is the bogus register values set for 16bpp, which was likely copied from from a wrong place. Addresses https://bugzilla.novell.com/show_bug.cgi?id=799216Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Chris Wilson authored
commit 372fbb8e upstream. Currently we report through our error state only the rings that have been initialised (as detected by ring->obj). This check is done after the GPU reset and ring re-initialisation, which means that the software state may not be the same as when we captured the hardware error and we may not print out any of the vital information for debugging the hang. This (and the implied object leak) is a regression from commit 3d57e5bd Author: Ben Widawsky <ben@bwidawsk.net> Date: Mon Oct 14 10:01:36 2013 -0700 drm/i915: Do a fuller init after reset Note that we are already starting to get bug reports with incomplete error states from 3.13, which also hampers debugging userspace driver issues. v2: Prevent a NULL dereference on 830gm/845g after a GPU reset where the scratch obj may be NULL. Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> References: https://bugs.freedesktop.org/show_bug.cgi?id=74094Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> [danvet: Add a bit of fluff to make it clear we need this expedited in stable.] Signed-off-by:
-
Stanislaw Gruszka authored
commit 22accca0 upstream. Not removing pm qos request and free memory for it can cause crash, when some other driver use pm qos. For example, this oops: BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff81307a6b>] plist_add+0x5b/0xd0 Call Trace: [<ffffffff810acf25>] pm_qos_update_target+0x125/0x1e0 [<ffffffff810ad071>] pm_qos_add_request+0x91/0x100 [<ffffffffa053ec14>] e1000_open+0xe4/0x5b0 [e1000e] was caused by earlier i915 probe failure: [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000 [drm:i915_driver_load] *ERROR* failed to init modeset i915: probe of 0000:00:02.0 failed with error -5 Bug report: http://bugzilla.redhat.com/show_bug.cgi?id=1057533Reported-by:
Giandomenico De Tullio <ghisha@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> [danvet: Drop unnecessary code movement.] Signed-off-by:
-
Todd Previte authored
commit 232a6ee9 upstream. Add new definitions for hotplug live status bits for VLV2 since they're in reverse order from the gen4x ones. Changelog: - Restored gen4 bit definitions - Added new definitions for VLV2 - Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct bit defintions - Replaced a lost trailing brace for the added switch() Signed-off-by:
Todd Previte <tprevite@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951 [danvet: Switch to _VLV postfix instead of prefix and regroupg comments again so that the g4x warning is right next to those defines. Also add a _G4X suffix for those special ones. Also cc stable.] Signed-off-by:
-
Akash Goel authored
commit ec14ba47 upstream. The 'offset' field of the 'scatterlist' structure was wrongly programmed with the offset value from the base of stolen area, whereas this field indicates the offset from where the interested data starts within the first PAGE pointed to by 'scattterlist' structure. As a result when a new GEM object allocated from stolen area is mapped to GTT, it could lead to an overwrite of GTT entries as the page count calculation will go wrong, refer the function 'sg_page_count'. v2: Modified the commit message. (Chris) Signed-off-by:
Akash Goel <akash.goel@intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71908 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69104Signed-off-by:
-
Chris Wilson authored
commit 304d695c upstream. In very rare cases (such as a memory failure stress test) it is possible to fill the entire ring without emitting a request. Under this circumstance, the outstanding request is flushed and waited upon. After space on the ring is cleared, we return to emitting the new command - except that we just cleared the seqno allocated for this operation and trigger the sanity check that a request is only ever emitted with a valid seqno. The fix is to rearrange the code to make sure the allocation of the seqno for this operation is after any required flushes of outstanding operations. The bug exists since the preallocation was introduced in commit 9d773091 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:52 2012 +0000 drm/i915: Preallocate next seqno before touching the ring Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Ilia Mirkin authored
commit 90d6db16 upstream. Some firmware images may be large (64K), so using kmalloc memory is inappropriate for them. Use vmalloc instead, to avoid high-order allocation failures. Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Maarten Lankhorst authored
commit ce8f7699 upstream. Commit de7b7d59 introduced tiled GART, but a linear copy is still performed. This may result in errors on eviction, fix it by checking tiling from memtype. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 2995fa78 upstream. This reverts commit be35f486 ("dm: wait until embedded kobject is released before destroying a device") and provides an improved fix. The kobject release code that calls the completion must be placed in a non-module file, otherwise there is a module unload race (if the process calling dm_kobject_release is preempted and the DM module unloaded after the completion is triggered, but before dm_kobject_release returns). To fix this race, this patch moves the completion code to dm-builtin.c which is always compiled directly into the kernel if BLK_DEV_DM is selected. The patch introduces a new dm_kobject_holder structure, its purpose is to keep the completion and kobject in one place, so that it can be accessed from non-module code without the need to export the layout of struct mapped_device to that code. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 78fe9e54 upstream. Some DCE8 boards have a funky BlankCrtc table that results in a timeout when trying to blank the display. The timeout is harmless (all operations needed from the table are complete), but wastes time and is confusing to users so work around it. bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit 6802d4ba upstream. The BlankCrtc table in some DCE8 boards has some logic shortcuts for the vbios when this bit is set. Clear it for driver use. v2: fix typo Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420Signed-off-by:
-
Alex Deucher authored
commit e9a321c6 upstream. DCE5 and newer hardware only has 1 DAC. Use the correct offset. This may fix display problems on certain board configurations. Signed-off-by:
-
Alex Deucher authored
commit 5d029339 upstream. It seems this got dropped when we merged UVD support last year. Add this back now. Signed-off-by:
-
Alex Deucher authored
commit d45b964a upstream. Needed to properly flush the read caches for fences. Signed-off-by:
-
Alex Deucher authored
commit 10e9ffae upstream. We need to set the engine bit to select the ME and also set the full cache bit. Should help stability on TN and cayman. V2: fix up surface sync in ib execute as well Signed-off-by:
-
Alex Deucher authored
commit d8e24525 upstream. Seems to cause problems with certain DP monitors. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=40699Signed-off-by:
-
Marek Olšák authored
commit 56492e0f upstream. This fixes a bug which was causing rejections of valid GPU commands from userspace. Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
Malcolm Priestley authored
commit dd4491df upstream. Current setting of symbol rate is not very actuate causing loss of lock. Covert temp to u64 and use mclk to calculate from big number. Calculate symbol rate by dividing symbol rate by 1000 times 1 << 24 and dividing sum by mclk. Add other symbol rate settings to function registers 0xa0-0xa3. In set_frontend add changes to register 0xf1 this must be done prior call to fe_reset. Register 0x00 doesn't need a second write of 0x1 Applied after patch m88rs2000: add m88rs2000_set_carrieroffset Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Malcolm Priestley authored
commit 06af15d1 upstream. Set the carrier offset correctly using the default mclk values. Add function m88rs2000_get_mclk to calculate the mclk value against crystal frequency which will later be used for other functions. Add function m88rs2000_set_carrieroffset to calculate and set the offset value. variable offset becomes a signed value. Register 0x86 is set the appropriate value according to remainder value of frequency % 192857 calculation as shown. Signed-off-by:
-
Olivier Grenie authored
commit d67350f8 upstream. Commit 173a64cb broke support for some dib807x versions. Fix it by providing backward compatibility with the older versions. [mkrufky@linuxtv.org: conflict handling and CodingStyle fixes] Signed-off-by:
Olivier Grenie <olivier.grenie@parrot.com> Acked-by:
Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit fa1e1de6 upstream. The buffer size on nxt200x is not enough: ... > Dec 20 10:52:04 rich kernel: [ 31.747949] nxt200x: nxt200x_writebytes: i2c wr reg=002c: len=255 is too big! ... Increase it to 256 bytes. Reported-by:
Rich Freeman <rich0@gentoo.org> Signed-off-by:
-
Malcolm Priestley authored
commit 17f335c3 upstream. Trivial USB ID addition for Avermedia H335. Signed-off-by:
-
Marek Szyprowski authored
commit b80cb8dc upstream. s5p_mfc_get_node_type() relies on get_index() helper function, which in turn relies on video_device index numbers assigned on driver registration. All this code is not really needed, because there is already access to respective video_device structures via common s5p_mfc_dev structure. This fixes the issues introduced by patch 1056e438 ("v4l2-dev: Fix race condition on __video_register_device"), which has been merged in v3.12-rc1. Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Kamil Debski <k.debski@samsung.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit 5ac64ba1 upstream. As the dvb-frontend kthread can be called anytime, it can race with some get status ioctl. So, it seems better to avoid one to race with the other while reading a 32 bits register. I can't see any other reason for having a mutex there at I2C, except to provide such kind of protection, as the I2C core already has a mutex to protect I2C transfers. Note: instead of this approach, it could eventually remove the dib8000 specific mutex for it, and either group the 4 ops into one xfer or to manually control the I2C mutex. The main advantage of the current approach is that the changes are smaller and more puntual. Signed-off-by:
-
Antti Palosaari authored
commit c57f87e6 upstream. PLL was attached twice to frontend0 leaving frontend1 without a tuner. frontend0 is DVB-C and frontend1 is DVB-T. Signed-off-by:
Antti Palosaari <crope@iki.fi> Signed-off-by:
-
Marek Szyprowski authored
commit 6c3df5da upstream. The side effect of commit 1056e438 ("v4l2-dev: Fix race condition on __video_register_device") is the increased number of index value assigned on video_device registration. Before that commit video_devices were numbered from 0, after it, the indexes starts from 1, because get_index() always count the device, which is being registered. Some device drivers rely on video_device index number for internal purposes, i.e. s5p-mfc driver stopped working after that patch. This patch restores the old method of numbering the video_device indexes. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by:
Ricardo Ribalda <ricardo.ribalda@gmail.com> Signed-off-by:
-
David Rientjes authored
commit 778c14af upstream. A 3% of system memory bonus is sometimes too excessive in comparison to other processes. With commit a63d83f4 ("oom: badness heuristic rewrite"), the OOM killer tries to avoid killing privileged tasks by subtracting 3% of overall memory (system or cgroup) from their per-task consumption. But as a result, all root tasks that consume less than 3% of overall memory are considered equal, and so it only takes 33+ privileged tasks pushing the system out of memory for the OOM killer to do something stupid and kill dhclient or other root-owned processes. For example, on a 32G machine it can't tell the difference between the 1M agetty and the 10G fork bomb member. The changelog describes this 3% boost as the equivalent to the global overcommit limit being 3% higher for privileged tasks, but this is not the same as discounting 3% of overall memory from _every privileged task individually_ during OOM selection. Replace the 3% of system memory bonus with a 3% of current memory usage bonus. By giving root tasks a bonus that is proportional to their actual size, they remain comparable even when relatively small. In the example above, the OOM killer will discount the 1M agetty's 256 badness points down to 179, and the 10G fork bomb's 262144 points down to 183500 points and make the right choice, instead of discounting both to 0 and killing agetty because it's first in the task list. Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
-
