After discussing with Arnd [1] it's preferable to change uretprobe
syscall number to 467 to omit the merge conflict with xattrat syscalls.

Also changing the ABI to 'common' which will ease up the global
scripts/syscall.tbl management. One consequence is we generate uretprobe
syscall numbers for ABIs that do not support uretprobe syscall, but the
syscall still returns -ENOSYS when called in that ABI.

[1] https://lore.kernel.org/lkml/784a34e5-4654-44c9-9c07-f9f4ffd952a0@app.fastmail.com/

Link: https://lore.kernel.org/all/20240712135228.1619332-2-jolsa@kernel.org/

Fixes: 190fec72 ("uprobe: Wire up uretprobe system call")
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

The kernel test robot reported that the find_module() is not available
if CONFIG_MODULES=n.
Fix this error by hiding find_modules() in #ifdef CONFIG_MODULES with
related rcu locks as try_module_get_by_name().

Link: https://lore.kernel.org/all/172056819167.201571.250053007194508038.stgit@devnote2/Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202407070744.RcLkn8sq-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202407070917.VVUCBlaS-lkp@intel.com/Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Currently, kprobe event checks whether the target symbol name is unique
or not, so that it does not put a probe on an unexpected place. But this
skips the check if the target is on a module because the module may not
be loaded.

To fix this issue, this patch checks the number of probe target symbols
in a target module when the module is loaded. If the probe is not on the
unique name symbols in the module, it will be rejected at that point.

Note that the symbol which has a unique name in the target module,
it will be accepted even if there are same-name symbols in the
kernel or other modules,

Link: https://lore.kernel.org/all/172016348553.99543.2834679315611882137.stgit@devnote2/Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Add a set of tests to validate that stack traces captured from or in the
presence of active uprobes and uretprobes are valid and complete.

For this we use BPF program that are installed either on entry or exit
of user function, plus deep-nested USDT. One of target funtions
(target_1) is recursive to generate two different entries in the stack
trace for the same uprobe/uretprobe, testing potential edge conditions.

If there is no fixes, we get something like this for one of the scenarios:

 caller: 0x758fff - 0x7595ab
 target_1: 0x758fd5 - 0x758fff
 target_2: 0x758fca - 0x758fd5
 target_3: 0x758fbf - 0x758fca
 target_4: 0x758fb3 - 0x758fbf
 ENTRY #0: 0x758fb3 (in target_4)
 ENTRY #1: 0x758fd3 (in target_2)
 ENTRY #2: 0x758ffd (in target_1)
 ENTRY #3: 0x7fffffffe000
 ENTRY #4: 0x7fffffffe000
 ENTRY #5: 0x6f8f39
 ENTRY #6: 0x6fa6f0
 ENTRY #7: 0x7f403f229590

Entry #3 and #4 (0x7fffffffe000) are uretprobe trampoline addresses
which obscure actual target_1 and another target_1 invocations. Also
note that between entry #0 and entry #1 we are missing an entry for
target_3.

With fixes, we get desired full stack traces:

 caller: 0x758fff - 0x7595ab
 target_1: 0x758fd5 - 0x758fff
 target_2: 0x758fca - 0x758fd5
 target_3: 0x758fbf - 0x758fca
 target_4: 0x758fb3 - 0x758fbf
 ENTRY #0: 0x758fb7 (in target_4)
 ENTRY #1: 0x758fc8 (in target_3)
 ENTRY #2: 0x758fd3 (in target_2)
 ENTRY #3: 0x758ffd (in target_1)
 ENTRY #4: 0x758ff3 (in target_1)
 ENTRY #5: 0x75922c (in caller)
 ENTRY #6: 0x6f8f39
 ENTRY #7: 0x6fa6f0
 ENTRY #8: 0x7f986adc4cd0

Now there is a logical and complete sequence of function calls.

Link: https://lore.kernel.org/all/20240522013845.1631305-5-andrii@kernel.org/Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

When kernel has pending uretprobes installed, it hijacks original user
function return address on the stack with a uretprobe trampoline
address. There could be multiple such pending uretprobes (either on
different user functions or on the same recursive one) at any given
time within the same task.

This approach interferes with the user stack trace capture logic, which
would report suprising addresses (like 0x7fffffffe000) that correspond
to a special "[uprobes]" section that kernel installs in the target
process address space for uretprobe trampoline code, while logically it
should be an address somewhere within the calling function of another
traced user function.

This is easy to correct for, though. Uprobes subsystem keeps track of
pending uretprobes and records original return addresses. This patch is
using this to do a post-processing step and restore each trampoline
address entries with correct original return address. This is done only
if there are pending uretprobes for current task.

This is a similar approach to what fprobe/kretprobe infrastructure is
doing when capturing kernel stack traces in the presence of pending
return probes.

Link: https://lore.kernel.org/all/20240522013845.1631305-3-andrii@kernel.org/Reported-by: Riham Selim <rihams@meta.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

This cleanup all kprobe events code is not related to the selftest
itself, and it can fail by the reason unrelated to this test.
If the test is successful, the generated events are cleaned up.
And if not, we cannot guarantee that the kprobe events will work
correctly. So, anyway, there is no need to clean it up.

Link: https://lore.kernel.org/all/171811265627.85078.16897867213512435822.stgit@devnote2/Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Cleanup the redundant WARN_ON_ONCE(cond) + pr_warn(msg) into
WARN_ONCE(cond, msg). Also add some WARN_ONCE() for hitcount check.
These WARN_ONCE() errors makes it easy to handle errors from ktest.

Link: https://lore.kernel.org/all/171811264685.85078.8068819097047430463.stgit@devnote2/Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Adding uretprobe shadow stack test that runs all existing
uretprobe tests with shadow stack enabled if it's available.

Link: https://lore.kernel.org/all/20240611112158.40795-9-jolsa@kernel.org/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Adding test to verify that when called from outside of the
trampoline provided by kernel, the uretprobe syscall will cause
calling process to receive SIGILL signal and the attached bpf
program is not executed.

Link: https://lore.kernel.org/all/20240611112158.40795-8-jolsa@kernel.org/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Adding test that creates uprobe consumer on uretprobe which changes some
of the registers. Making sure the changed registers are propagated to the
user space when the ureptobe syscall trampoline is used on x86_64.

To be able to do this, adding support to bpf_testmod to create uprobe via
new attribute file:
  /sys/kernel/bpf_testmod_uprobe

This file is expecting file offset and creates related uprobe on current
process exe file and removes existing uprobe if offset is 0. The can be
only single uprobe at any time.

The uprobe has specific consumer that changes registers used in ureprobe
syscall trampoline and which are later checked in the test.

Link: https://lore.kernel.org/all/20240611112158.40795-7-jolsa@kernel.org/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Add uretprobe syscall test that compares register values before
and after the uretprobe is hit. It also compares the register
values seen from attached bpf program.

Link: https://lore.kernel.org/all/20240611112158.40795-6-jolsa@kernel.org/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Adding return uprobe test for shadow stack and making sure it's
working properly. Borrowed some of the code from bpf selftests.

Link: https://lore.kernel.org/all/20240611112158.40795-5-jolsa@kernel.org/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Adding uretprobe syscall instead of trap to speed up return probe.

At the moment the uretprobe setup/path is:

  - install entry uprobe

  - when the uprobe is hit, it overwrites probed function's return address
    on stack with address of the trampoline that contains breakpoint
    instruction

  - the breakpoint trap code handles the uretprobe consumers execution and
    jumps back to original return address

This patch replaces the above trampoline's breakpoint instruction with new
ureprobe syscall call. This syscall does exactly the same job as the trap
with some more extra work:

  - syscall trampoline must save original value for rax/r11/rcx registers
    on stack - rax is set to syscall number and r11/rcx are changed and
    used by syscall instruction

  - the syscall code reads the original values of those registers and
    restore those values in task's pt_regs area

  - only caller from trampoline exposed in '[uprobes]' is allowed,
    the process will receive SIGILL signal otherwise

Even with some extra work, using the uretprobes syscall shows speed
improvement (compared to using standard breakpoint):

  On Intel (11th Gen Intel(R) Core(TM) i7-1165G7 @ 2.80GHz)

  current:
    uretprobe-nop  :    1.498 ± 0.000M/s
    uretprobe-push :    1.448 ± 0.001M/s
    uretprobe-ret  :    0.816 ± 0.001M/s

  with the fix:
    uretprobe-nop  :    1.969 ± 0.002M/s  < 31% speed up
    uretprobe-push :    1.910 ± 0.000M/s  < 31% speed up
    uretprobe-ret  :    0.934 ± 0.000M/s  < 14% speed up

  On Amd (AMD Ryzen 7 5700U)

  current:
    uretprobe-nop  :    0.778 ± 0.001M/s
    uretprobe-push :    0.744 ± 0.001M/s
    uretprobe-ret  :    0.540 ± 0.001M/s

  with the fix:
    uretprobe-nop  :    0.860 ± 0.001M/s  < 10% speed up
    uretprobe-push :    0.818 ± 0.001M/s  < 10% speed up
    uretprobe-ret  :    0.578 ± 0.000M/s  <  7% speed up

The performance test spawns a thread that runs loop which triggers
uprobe with attached bpf program that increments the counter that
gets printed in results above.

The uprobe (and uretprobe) kind is determined by which instruction
is being patched with breakpoint instruction. That's also important
for uretprobes, because uprobe is installed for each uretprobe.

The performance test is part of bpf selftests:
  tools/testing/selftests/bpf/run_bench_uprobes.sh

Note at the moment uretprobe syscall is supported only for native
64-bit process, compat process still uses standard breakpoint.

Note that when shadow stack is enabled the uretprobe syscall returns
via iret, which is slower than return via sysret, but won't cause the
shadow stack violation.

Link: https://lore.kernel.org/all/20240611112158.40795-4-jolsa@kernel.org/Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Wiring up uretprobe system call, which comes in following changes.
We need to do the wiring before, because the uretprobe implementation
needs the syscall number.

Note at the moment uretprobe syscall is supported only for native
64-bit process.

Link: https://lore.kernel.org/all/20240611112158.40795-3-jolsa@kernel.org/Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Currently the application with enabled shadow stack will crash
if it sets up return uprobe. The reason is the uretprobe kernel
code changes the user space task's stack, but does not update
shadow stack accordingly.

Adding new functions to update values on shadow stack and using
them in uprobe code to keep shadow stack in sync with uretprobe
changes to user stack.

Link: https://lore.kernel.org/all/20240611112158.40795-2-jolsa@kernel.org/Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Fixes: 488af8ea ("x86/shstk: Wire in shadow stack interface")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kprobes/kprobe_example.o
WARNING: modpost: missing MODULE_DESCRIPTION() in samples/kprobes/kretprobe_example.o

Add the missing invocations of the MODULE_DESCRIPTION() macro.

Link: https://lore.kernel.org/all/20240601-md-samples-kprobes-v1-1-b6a772353893@quicinc.com/Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in samples/fprobe/fprobe_example.o

Add the missing invocation of the MODULE_DESCRIPTION() macro.

Link: https://lore.kernel.org/all/20240601-md-samples-fprobe-v1-1-5d256a956612@quicinc.com/Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

The kprobes and synth event generation test modules add events and lock
(get a reference) those event file reference in module init function,
and unlock and delete it in module exit function. This is because those
are designed for playing as modules.

If we make those modules as built-in, those events are left locked in the
kernel, and never be removed. This causes kprobe event self-test failure
as below.

[   97.349708] ------------[ cut here ]------------
[   97.353453] WARNING: CPU: 3 PID: 1 at kernel/trace/trace_kprobe.c:2133 kprobe_trace_self_tests_init+0x3f1/0x480
[   97.357106] Modules linked in:
[   97.358488] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 6.9.0-g69964673-dirty #14
[   97.361556] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[   97.363880] RIP: 0010:kprobe_trace_self_tests_init+0x3f1/0x480
[   97.365538] Code: a8 24 08 82 e9 ae fd ff ff 90 0f 0b 90 48 c7 c7 e5 aa 0b 82 e9 ee fc ff ff 90 0f 0b 90 48 c7 c7 2d 61 06 82 e9 8e fd ff ff 90 <0f> 0b 90 48 c7 c7 33 0b 0c 82 89 c6 e8 6e 03 1f ff 41 ff c7 e9 90
[   97.370429] RSP: 0000:ffffc90000013b50 EFLAGS: 00010286
[   97.371852] RAX: 00000000fffffff0 RBX: ffff888005919c00 RCX: 0000000000000000
[   97.373829] RDX: ffff888003f40000 RSI: ffffffff8236a598 RDI: ffff888003f40a68
[   97.375715] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
[   97.377675] R10: ffffffff811c9ae5 R11: ffffffff8120c4e0 R12: 0000000000000000
[   97.379591] R13: 0000000000000001 R14: 0000000000000015 R15: 0000000000000000
[   97.381536] FS:  0000000000000000(0000) GS:ffff88807dcc0000(0000) knlGS:0000000000000000
[   97.383813] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   97.385449] CR2: 0000000000000000 CR3: 0000000002244000 CR4: 00000000000006b0
[   97.387347] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[   97.389277] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[   97.391196] Call Trace:
[   97.391967]  <TASK>
[   97.392647]  ? __warn+0xcc/0x180
[   97.393640]  ? kprobe_trace_self_tests_init+0x3f1/0x480
[   97.395181]  ? report_bug+0xbd/0x150
[   97.396234]  ? handle_bug+0x3e/0x60
[   97.397311]  ? exc_invalid_op+0x1a/0x50
[   97.398434]  ? asm_exc_invalid_op+0x1a/0x20
[   97.399652]  ? trace_kprobe_is_busy+0x20/0x20
[   97.400904]  ? tracing_reset_all_online_cpus+0x15/0x90
[   97.402304]  ? kprobe_trace_self_tests_init+0x3f1/0x480
[   97.403773]  ? init_kprobe_trace+0x50/0x50
[   97.404972]  do_one_initcall+0x112/0x240
[   97.406113]  do_initcall_level+0x95/0xb0
[   97.407286]  ? kernel_init+0x1a/0x1a0
[   97.408401]  do_initcalls+0x3f/0x70
[   97.409452]  kernel_init_freeable+0x16f/0x1e0
[   97.410662]  ? rest_init+0x1f0/0x1f0
[   97.411738]  kernel_init+0x1a/0x1a0
[   97.412788]  ret_from_fork+0x39/0x50
[   97.413817]  ? rest_init+0x1f0/0x1f0
[   97.414844]  ret_from_fork_asm+0x11/0x20
[   97.416285]  </TASK>
[   97.417134] irq event stamp: 13437323
[   97.418376] hardirqs last  enabled at (13437337): [<ffffffff8110bc0c>] console_unlock+0x11c/0x150
[   97.421285] hardirqs last disabled at (13437370): [<ffffffff8110bbf1>] console_unlock+0x101/0x150
[   97.423838] softirqs last  enabled at (13437366): [<ffffffff8108e17f>] handle_softirqs+0x23f/0x2a0
[   97.426450] softirqs last disabled at (13437393): [<ffffffff8108e346>] __irq_exit_rcu+0x66/0xd0
[   97.428850] ---[ end trace 0000000000000000 ]---

And also, since we can not cleanup dynamic_event file, ftracetest are
failed too.

To avoid these issues, build these tests only as modules.

Link: https://lore.kernel.org/all/171811263754.85078.5877446624311852525.stgit@devnote2/

Fixes: 9fe41efa ("tracing: Add synth event generation test module")
Fixes: 64836248 ("tracing: Add kprobe event command generation test module")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Merge tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Update copies of kernel headers, which resulted in support for the
   new 'mseal' syscall, SUBVOL statx return mask bit, RISC-V and PPC
   prctls, fcntl's DUPFD_QUERY, POSTED_MSI_NOTIFICATION IRQ vector,
   'map_shadow_stack' syscall for x86-32.

 - Revert perf.data record memory allocation optimization that ended up
   causing a regression, work is being done to re-introduce it in the
   next merge window.

 - Fix handling of minimal vmlinux.h file used with BPF's CO-RE when
   interrupting the build.

* tag 'perf-tools-fixes-for-v6.10-2-2024-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools:
  perf bpf: Fix handling of minimal vmlinux.h file when interrupting the build
  Revert "perf record: Reduce memory for recording PERF_RECORD_LOST_SAMPLES event"
  tools headers arm64: Sync arm64's cputype.h with the kernel sources
  tools headers uapi: Sync linux/stat.h with the kernel sources to pick STATX_SUBVOL
  tools headers UAPI: Update i915_drm.h with the kernel sources
  tools headers UAPI: Sync kvm headers with the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools headers: Update the syscall tables and unistd.h, mostly to support the new 'mseal' syscall
  perf trace beauty: Update the arch/x86/include/asm/irq_vectors.h copy with the kernel sources to pick POSTED_MSI_NOTIFICATION
  perf beauty: Update copy of linux/socket.h with the kernel sources
  tools headers UAPI: Sync fcntl.h with the kernel sources to pick F_DUPFD_QUERY
  tools headers UAPI: Sync linux/prctl.h with the kernel sources
  tools include UAPI: Sync linux/stat.h with the kernel sources

Pull EDAC fixes from Borislav Petkov:

 - Convert PCI core error codes to proper error numbers since latter get
   propagated all the way up to the module loading functions

* tag 'edac_urgent_for_v6.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/igen6: Convert PCIBIOS_* return codes to errnos
  EDAC/amd64: Convert PCIBIOS_* return codes to errnos

Pull clk fix from Stephen Boyd:
 "One fix for the SiFive PRCI clocks so that the device boots again.

  This driver was registering clkdev lookups that were always going to
  be useless. This wasn't a problem until clkdev started returning an
  error in these cases, causing this driver to fail probe, and thus boot
  to fail because clks are essential for most drivers. The fix is
  simple, don't use clkdev because this is a DT based system where
  clkdev isn't used"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: sifive: Do not register clkdevs for PRCI clocks

Pull smb client fixes from Steve French:
 "Two small smb3 client fixes:

   - fix deadlock in umount

   - minor cleanup due to netfs change"

* tag '6.10-rc2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Don't advance the I/O iterator before terminating subrequest
  smb: client: fix deadlock in smb2_find_smb_tcon()

Pull HID fixes from Benjamin Tissoires:

 - fix potential read out of bounds in hid-asus (Andrew Ballance)

 - fix endian-conversion on little endian systems in intel-ish-hid (Arnd
   Bergmann)

 - A couple of new input event codes (Aseda Aboagye)

 - errors handling fixes in hid-nvidia-shield (Chen Ni), hid-nintendo
   (Christophe JAILLET), hid-logitech-dj (José Expósito)

 - current leakage fix while the device is in suspend on a i2c-hid
   laptop (Johan Hovold)

 - other assorted smaller fixes and device ID / quirk entry additions

* tag 'for-linus-2024060801' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: Ignore battery for ELAN touchscreens 2F2C and 4116
  HID: i2c-hid: elan: fix reset suspend current leakage
  dt-bindings: HID: i2c-hid: elan: add 'no-reset-on-power-off' property
  dt-bindings: HID: i2c-hid: elan: add Elan eKTH5015M
  dt-bindings: HID: i2c-hid: add dedicated Ilitek ILI2901 schema
  input: Add support for "Do Not Disturb"
  input: Add event code for accessibility key
  hid: asus: asus_report_fixup: fix potential read out of bounds
  HID: logitech-hidpp: add missing MODULE_DESCRIPTION() macro
  HID: intel-ish-hid: fix endian-conversion
  HID: nintendo: Fix an error handling path in nintendo_hid_probe()
  HID: logitech-dj: Fix memory leak in logi_dj_recv_switch_to_dj_mode()
  HID: core: remove unnecessary WARN_ON() in implement()
  HID: nvidia-shield: Add missing check for input_ff_create_memless
  HID: intel-ish-hid: Fix build error for COMPILE_TEST

Merge tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Fix the initial state of the save button in 'make gconfig'

 - Improve the Kconfig documentation

 - Fix a Kconfig bug regarding property visibility

 - Fix build breakage for systems where 'sed' is not installed in /bin

 - Fix a false warning about missing MODULE_DESCRIPTION()

* tag 'kbuild-fixes-v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  modpost: do not warn about missing MODULE_DESCRIPTION() for vmlinux.o
  kbuild: explicitly run mksysmap as sed script from link-vmlinux.sh
  kconfig: remove wrong expr_trans_bool()
  kconfig: doc: document behavior of 'select' and 'imply' followed by 'if'
  kconfig: doc: fix a typo in the note about 'imply'
  kconfig: gconf: give a proper initial state to the Save button
  kconfig: remove unneeded code for user-supplied values being out of range

Pull media fixes from Mauro Carvalho Chehab:

 - fixes for the new ipu6 driver (and related fixes to mei csi driver)

 - fix a double debugfs remove logic at mgb4 driver

 - a documentation fix

* tag 'media/v6.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: intel/ipu6: add csi2 port sanity check in notifier bound
  media: intel/ipu6: update the maximum supported csi2 port number to 6
  media: mei: csi: Warn less verbosely of a missing device fwnode
  media: mei: csi: Put the IPU device reference
  media: intel/ipu6: fix the buffer flags caused by wrong parentheses
  media: intel/ipu6: Fix an error handling path in isys_probe()
  media: intel/ipu6: Move isys_remove() close to isys_probe()
  media: intel/ipu6: Fix some redundant resources freeing in ipu6_pci_remove()
  media: Documentation: v4l: Fix ACTIVE route flag
  media: mgb4: Fix double debugfs remove

Pull irq fixes from Ingo Molnar:

 - Fix possible memory leak the riscv-intc irqchip driver load failures

 - Fix boot crash in the sifive-plic irqchip driver caused by recently
   changed boot initialization order

 - Fix race condition in the gic-v3-its irqchip driver

* tag 'irq-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix potential race condition in its_vlpi_prop_update()
  irqchip/sifive-plic: Chain to parent IRQ after handlers are ready
  irqchip/riscv-intc: Prevent memory leak when riscv_intc_init_common() fails

Pull x86 fixes from Ingo Molnar:
 "Miscellaneous fixes:

   - Fix kexec() crash if call depth tracking is enabled

   - Fix SMN reads on inaccessible registers on certain AMD systems"

* tag 'x86-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/amd_nb: Check for invalid SMN reads
  x86/kexec: Fix bug with call depth tracking

Pull perf event fix from Ingo Molnar:
 "Fix race between perf_event_free_task() and perf_event_release_kernel()
  that can result in missed wakeups and hung tasks"

* tag 'perf-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/core: Fix missing wakeup when waiting for context reference

Pull locking doc fix from Ingo Molnar:
 "Fix typos in the kerneldoc of some of the atomic APIs"

* tag 'locking-urgent-2024-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/atomic: scripts: fix ${atomic}_sub_and_test() kerneldoc

Merge tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "14 hotfixes, 6 of which are cc:stable.

  All except the nilfs2 fix affect MM and all are singletons - see the
  chagelogs for details"

* tag 'mm-hotfixes-stable-2024-06-07-15-24' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  nilfs2: fix nilfs_empty_dir() misjudgment and long loop on I/O errors
  mm: fix xyz_noprof functions calling profiled functions
  codetag: avoid race at alloc_slab_obj_exts
  mm/hugetlb: do not call vma_add_reservation upon ENOMEM
  mm/ksm: fix ksm_zero_pages accounting
  mm/ksm: fix ksm_pages_scanned accounting
  kmsan: do not wipe out origin when doing partial unpoisoning
  vmalloc: check CONFIG_EXECMEM in is_vmalloc_or_module_addr()
  mm: page_alloc: fix highatomic typing in multi-block buddies
  nilfs2: fix potential kernel bug due to lack of writeback flag waiting
  memcg: remove the lockdep assert from __mod_objcg_mlstate()
  mm: arm64: fix the out-of-bounds issue in contpte_clear_young_dirty_ptes
  mm: huge_mm: fix undefined reference to `mthp_stats' for CONFIG_SYSFS=n
  mm: drop the 'anon_' prefix for swap-out mTHP counters

Pull gpio fixes from Bartosz Golaszewski:

 - interrupt handling and Kconfig fixes for gpio-tqmx86

 - add a buffer for storing output values in gpio-tqmx86 as reading back
   the registers always returns the input values

 - add missing MODULE_DESCRIPTION()s to several GPIO drivers

* tag 'gpio-fixes-for-v6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: add missing MODULE_DESCRIPTION() macros
  gpio: tqmx86: fix broken IRQ_TYPE_EDGE_BOTH interrupt type
  gpio: tqmx86: store IRQ trigger type and unmask status separately
  gpio: tqmx86: introduce shadow register for GPIO output value
  gpio: tqmx86: fix typo in Kconfig label

Pull block fixes from Jens Axboe:

 - Fix for null_blk block size validation (Andreas)

 - NVMe pull request via Keith:
      - Use reserved tags for special fabrics operations (Chunguang)
      - Persistent Reservation status masking fix (Weiwen)

* tag 'block-6.10-20240607' of git://git.kernel.dk/linux:
  null_blk: fix validation of block size
  nvme: fix nvme_pr_* status code parsing
  nvme-fabrics: use reserved tag for reg read/write command

Pull io_uring fixes from Jens Axboe:

 - Fix a locking order issue with setting max async thread workers
   (Hagar)

 - Fix for a NULL pointer dereference for failed async flagged requests
   using ring provided buffers. This doesn't affect the current kernel,
   but it does affect older kernels, and is being queued up for 6.10
   just to make the stable process easier (me)

 - Fix for NAPI timeout calculations for how long to busy poll, and
   subsequently how much to sleep post that if a wait timeout is passed
   in (me)

 - Fix for a regression in this release cycle, where we could end up
   using a partially unitialized match value for io-wq (Su)

* tag 'io_uring-6.10-20240607' of git://git.kernel.dk/linux:
  io_uring: fix possible deadlock in io_register_iowq_max_workers()
  io_uring/io-wq: avoid garbage value of 'match' in io_wq_enqueue()
  io_uring/napi: fix timeout calculation
  io_uring: check for non-NULL file pointer in io_file_can_poll()

Pull btrfs fixes from David Sterba:

 - fix handling of folio private changes.

   The private value holds pointer to our extent buffer structure
   representing a metadata range. Release and create of the range was
   not properly synchronized when updating the private bit which ended
   up in double folio_put, leading to all sorts of breakage

 - fix a crash, reported as duplicate key in metadata, but caused by a
   race of fsync and size extending write. Requires prealloc target
   range + fsync and other conditions (log tree state, timing)

 - fix leak of qgroup extent records after transaction abort

* tag 'for-6.10-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: protect folio::private when attaching extent buffer folios
  btrfs: fix leak of qgroup extent records after transaction abort
  btrfs: fix crash on racing fsync and size-extending write into prealloc

Pull nfsd fix from Chuck Lever:

 - Fix an occasional memory overwrite caused by a fix added in 6.10

* tag 'nfsd-6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
  SUNRPC: Fix loop termination condition in gss_free_in_token_pages()

Pull RISC-V fixes from Palmer Dabbelt:

 - Another fix to avoid allocating pages that overlap with ERR_PTR,
   which manifests on rv32

 - A revert for the badaccess patch I incorrectly picked up an early
   version of

* tag 'riscv-for-linus-6.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  Revert "riscv: mm: accelerate pagefault when badaccess"
  riscv: fix overlap of allocated page and PTR_ERR

Pull s390 fixes from Alexander Gordeev:

 - Do not create PT_LOAD program header for the kenel image when the
   virtual memory informaton in OS_INFO data is not available. That
   fixes stand-alone dump failures against kernels that do not provide
   the virtual memory informaton

 - Add KVM s390 shared zeropage selftest

* tag 's390-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390x: selftests: Add shared zeropage test
  s390/crash: Do not use VM info if os_info does not have it

Pull arm64 fixes from Will Deacon:

 - Fix spurious CPU hotplug warning message from SETEND emulation code

 - Fix the build when GCC wasn't inlining our I/O accessor internals

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/io: add constant-argument check
  arm64: armv8_deprecated: Fix warning in isndep cpuhp starting process

Merge tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:

 -  Default silead touchscreen driver to 10 fingers and drop 10 finger
    setting from all DMI quirks. More of a cleanup then a pure fix, but
    since the DMI quirks always get updated through the fixes branch
    this avoids conflicts.

 -  Kconfig fix for randconfig builds

 -  dell-smbios: Fix wrong token data in sysfs

 -  amd-hsmp: Fix driver poking unsupported hw when loaded manually

* tag 'platform-drivers-x86-v6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86/amd/hsmp: Check HSMP support on AMD family of processors
  platform/x86: dell-smbios: Simplify error handling
  platform/x86: dell-smbios: Fix wrong token data in sysfs
  platform/x86: yt2-1380: add CONFIG_EXTCON dependency
  platform/x86: touchscreen_dmi: Use 2-argument strscpy()
  platform/x86: touchscreen_dmi: Drop "silead,max-fingers" property
  Input: silead - Always support 10 fingers