- 08 Jan, 2022 1 commit
-
-
Christophe JAILLET authored
In [1], Christoph Hellwig has proposed to remove the wrappers in include/linux/pci-dma-compat.h. Some reasons why this API should be removed have been given by Julia Lawall in [2]. A coccinelle script has been used to perform the needed transformation. It can be found in [3]. [1]: https://lore.kernel.org/kernel-janitors/20200421081257.GA131897@infradead.org/ [2]: https://lore.kernel.org/kernel-janitors/alpine.DEB.2.22.394.2007120902170.2424@hadrien/ [3]: https://lore.kernel.org/kernel-janitors/20200716192821.321233-1-christophe.jaillet@wanadoo.fr/Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/b88f25f3d07be92dd75494dc129a85619afb1366.1641500561.git.christophe.jaillet@wanadoo.frSigned-off-by:
Vinod Koul <vkoul@kernel.org>
-
- 05 Jan, 2022 20 commits
-
-
Tudor Ambarus authored
Tasklets run with interrupts enabled, so we need to protect atchan->irq_status with spin_lock_irq() otherwise the tasklet can be interrupted by the IRQ that modifies irq_status. Move the dev_dbg that prints the irq_status in at_xdmac_handle_cyclic() and lower in at_xdmac_tasklet() where the IRQ is disabled. Signed-off-by:
Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20211215110115.191749-13-tudor.ambarus@microchip.comSigned-off-by:
-
Tudor Ambarus authored
Apart of making the code easier to read, this patch is a prerequisite for a functional change: tasklets run with interrupts enabled, so we need to protect atchan->irq_status with spin_lock_irq() otherwise the tasklet can be interrupted by the IRQ that modifies irq_status. atchan->irq_status will be protected in a further patch. Signed-off-by:
-
Tudor Ambarus authored
The hardware channel next descriptor view structure contains just fields of 32 bits, while dma_addr_t can be of type u64 or u32 depending on CONFIG_ARCH_DMA_ADDR_T_64BIT. Force u32 to comply with what the hardware expects. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
-
Tudor Ambarus authored
AT_XDMAC_CNDC_NDVIEW_NDV3 was set even for AT_XDMAC_MBR_UBC_NDV2, because of the wrong bit handling. Fix it. Fixes: ee0fe35c ("dmaengine: xdmac: Handle descriptor's view 3 registers") Signed-off-by:
-
Tudor Ambarus authored
It's easier to read code with fewer levels of indentation, remove a level of indentation in at_xdmac_advance_work() if (!foo() & !bar()) { } was replaced by: if (foo() || bar()) return; Signed-off-by: -
Tudor Ambarus authored
Since tx_submit can be called from a hard IRQ, xfers_list must be protected with a lock to avoid concurency on the list's elements. Since at_xdmac_handle_cyclic() is called from a tasklet, spin_lock_irq is enough to protect from a hard IRQ. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
-
Tudor Ambarus authored
Move the free desc to the tail of the list, so that the sequence of descriptors is more track-able in case of debug. One would know which descriptor should come next and could easier catch concurrency over descriptors for example. virt-dma uses list_splice_tail_init() as well, follow the core driver. Signed-off-by:
-
Tudor Ambarus authored
The transfer descriptors were wrongly moved to the free descriptors list before calling the tx desc callback. As the DMA engine drivers drop any locks before calling the callback function, txd could be taken again, resulting in its callback called prematurely. Fix the race for the tx desc callback by moving the xfer desc into the free desc list after the callback is invoked. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
-
Tudor Ambarus authored
Caller of dma_cookie_complete is expected to hold a lock to prevent concurrency over the channel's completed cookie marker. Call dma_cookie_complete() with the lock held. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
-
Tudor Ambarus authored
It is desirable to do the prints without the lock held if possible, so move the print after the lock is released. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
-
Tudor Ambarus authored
Cyclic channels must too call issue_pending in order to start a transfer. Start the transfer in issue_pending regardless of the type of channel. This wrongly worked before, because in the past the transfer was started at tx_submit level when only a desc in the transfer list. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
-
Tudor Ambarus authored
tx_submit is supposed to push the current transaction descriptor to a pending queue, waiting for issue_pending() to be called. issue_pending() must start the transfer, not tx_submit(), thus remove at_xdmac_start_xfer() from at_xdmac_tx_submit(). Clients of at_xdmac that assume that tx_submit() starts the transfer must be updated and call dma_async_issue_pending() if they miss to call it (one example is atmel_serial). As the at_xdmac_start_xfer() is now called only from at_xdmac_advance_work() when !at_xdmac_chan_is_enabled(), the at_xdmac_chan_is_enabled() check is no longer needed in at_xdmac_start_xfer(), thus remove it. Fixes: e1f7c9ee ("dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver") Signed-off-by:
-
Dave Jiang authored
The following sysfs attributes will be obsolete due to the name change of tokens to read buffers: max_tokens token_limit group/tokens_allowed group/tokens_reserved group/use_token_limit Create new entries and have old entry print warning of deprecation. New attributes to replace the token ones: max_read_buffers read_buffer_limit group/read_buffers_allowed group/read_buffers_reserved group/use_read_buffer_limit Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/163951339488.2988321.2424012059911316373.stgit@djiang5-desk3.ch.intel.comSigned-off-by:
-
Dave Jiang authored
DSA spec v1.2 has changed the term of "bandwidth tokens" to "read buffers" in order to make the concept clearer. Deprecate bandwidth token naming in the driver and convert to read buffers in order to match with the spec and reduce confusion when reading the spec. Signed-off-by:
-
Dave Jiang authored
By the spec, wq size and group association is not changeable unless device is disabled. Exclude clearing the shadow copy on wq disable/reset. This allows wq type to be changed after disable to be re-enabled. Move the size and group association to its own cleanup and only call it during device disable. Fixes: 0dcfe41e ("dmanegine: idxd: cleanup all device related bits after disabling device") Reported-by:
Lucas Van <lucas.van@intel.com> Tested-by:
-
Dave Jiang authored
Change the driver where WQ interrupt is requested only when wq is being enabled. This new scheme set things up so that request_threaded_irq() is only called when a kernel wq type is being enabled. This also sets up for future interrupt request where different interrupt handler such as wq occupancy interrupt can be setup instead of the wq completion interrupt. Not calling request_irq() until the WQ actually needs an irq also prevents wasting of CPU irq vectors on x86 systems, which is a limited resource. idxd_flush_pending_descs() is moved to device.c since descriptor flushing is now part of wq disable rather than shutdown(). Signed-off-by:
-
Dave Jiang authored
The descriptor flushing for shutdown is not holding the irq_entry list lock. If there's ongoing interrupt completion handling, this can corrupt the list. Add locking to protect list walking. Also refactor the code so it's more compact. Fixes: 8f47d1a5 ("dmaengine: idxd: connect idxd to dmaengine subsystem") Signed-off-by:
-
Dave Jiang authored
With irq_entry already being associated with the wq in a 1:1 relationship, embed the irq_entry in the idxd_wq struct and remove back pointers for idxe_wq and idxd_device. In the process of this work, clean up the interrupt handle assignment so that there's no decision to be made during submit call on where interrupt handle value comes from. Set the interrupt handle during irq request initialization time. irq_entry 0 is designated as special and is tied to the device itself. Signed-off-by:
-
Greg Kroah-Hartman authored
There are currently 2 ways to create a set of sysfs files for a kobj_type, through the default_attrs field, and the default_groups field. Move the ioatdma sysfs code to use default_groups field which has been the preferred way since aa30f47c ("kobject: Add support for default attribute groups to kobj_type") so that we can soon get rid of the obsolete default_attrs field. Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
Vinod Koul authored
We have a conflict in idxd driver between 'fixes' and 'next' and there are patches dependent on this so, merge the 'fixes' branch into next
-
- 03 Jan, 2022 6 commits
-
-
Kunihiko Hayashi authored
The variables src_addr and dst_addr handle DMA addresses, so these should be declared as dma_addr_t. Fixes: 667b9251 ("dmaengine: uniphier-xdmac: Add UniPhier external DMA controller driver") Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1639456963-10232-1-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by:
-
Vinod Koul authored
Commit 188c310bdd5d ("dmaengine: xilinx_dpdma: stop using slave_id field") add the header file with incorrect format for SPDX tag, fix that WARNING: Improper SPDX comment style for 'include/linux/dma/xilinx_dpdma.h', please use '/*' instead #1: FILE: include/linux/dma/xilinx_dpdma.h:1: +// SPDX-License-Identifier: GPL-2.0 WARNING: Missing or malformed SPDX-License-Identifier tag in line 1 #1: FILE: include/linux/dma/xilinx_dpdma.h:1: +// SPDX-License-Identifier: GPL-2.0 Fixes: 188c310bdd5d ("dmaengine: xilinx_dpdma: stop using slave_id field") Signed-off-by: -
Rob Herring authored
Convert the Arm PL330 DMA controller binding to DT schema. The '#dma-channels' and '#dma-requests' properties are unused as they are discoverable and are non-standard (the standard props don't have '#'). So drop them from the binding. Cc: Vinod Koul <vkoul@kernel.org> Cc: dmaengine@vger.kernel.org Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20211217170644.3145332-1-robh@kernel.orgSigned-off-by:
-
Amelie Delaunay authored
This patch fixes STM32_MDMA_CTBR_TSEL_MASK, which is [5:0], not [7:0]. Fixes: a4ffb13c ("dmaengine: Add STM32 MDMA driver") Signed-off-by:
Amelie Delaunay <amelie.delaunay@foss.st.com> Link: https://lore.kernel.org/r/20211220165827.1238097-1-amelie.delaunay@foss.st.comSigned-off-by:
-
Yoshihiro Shimoda authored
Add support for R-Car S4-8. We can reuse R-Car V3U code so that renames variable names as "gen4". Note that some registers of R-Car V3U do not exist on R-Car S4-8, but none of them are used by the driver for now. Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Ulrich Hecht <uli+renesas@fpond.eu> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20211222114507.1252947-3-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
-
Yoshihiro Shimoda authored
Document the compatible value for the Direct Memory Access Controller blocks in the Renesas R-Car S4-8 (R8A779F0) SoC. The most visible difference with DMAC blocks on other R-Car SoCs (except R8A779A0) is the move of the per-channel registers to a separate register block. Signed-off-by:
-
- 17 Dec, 2021 13 commits
-
-
Vinod Koul authored
Merge the tag dmaengine_topic_slave_id_removal_5.17 into next. This brings in the slave_id removal topic changes
-
Christophe JAILLET authored
'shdma_slave_used' is a bitmap. So use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by:
-
Geert Uytterhoeven authored
Use the FIELD_{GET,PREP}() helpers, instead of defining custom macros implementing the same operations. Signed-off-by: -
Colin Ian King authored
The pointer hwdesc is being initialized with a value that is never read, it is being updated later in a for-loop. The assignment is redundant and can be removed. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Reviewed-by:
-
Dave Jiang authored
Add a sysfs knob to allow tuning of retries for the kernel ENQCMDS descriptor submission. While on host, it is not as likely that ENQCMDS return busy during normal operations due to the driver controlling the number of descriptors allocated for submission. However, when the driver is operating as a guest driver, the chance of retry goes up significantly due to sharing a wq with multiple VMs. A default value is provided with the system admin being able to tune the value on a per WQ basis. Suggested-by:
Sanjay Kumar <sanjay.k.kumar@intel.com> Signed-off-by:
-
Dave Jiang authored
Add default values for wq size, max_xfer_size and max_batch_size. These values should provide a general guidance for the wq configuration when the user does not specify any specific values. Signed-off-by:
-
Geert Uytterhoeven authored
"make dtbs_check": Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml arch/riscv/boot/dts/canaan/sipeed_maix_bit.dt.yaml: dma-controller@50000000: 'resets' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml The Synopsys DesignWare AXI DMA Controller on the Canaan K210 SoC exposes its reset signal. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Damien Le Moal <damien.lemoal@opensource.wdc.com> Link: https://lore.kernel.org/r/20211125152008.162571-1-geert@linux-m68k.orgSigned-off-by:
-
Paul Cercueil authored
For some devices with only half-duplex capabilities, it doesn't make much sense to use one DMA channel per direction, as both channels will never be active at the same time. Add support for bidirectional I/O on DMA channels. The client drivers can then request a "tx-rx" DMA channel which will be used for both directions. Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211206174259.68133-7-paul@crapouillou.netSigned-off-by:
-
Paul Cercueil authored
Replace the uint32_t type used all over dma-jz4780.c with the equivalent Linux type: u32. Signed-off-by:
-
Paul Cercueil authored
The JZ4760 and JZ4760B SoCs have two regular DMA controllers with 6 channels each. They also have an extra DMA controller named MDMA with only 2 channels, that only supports memcpy operations, and one named BDMA with only 3 channels, that is mostly used for transfers between memories and the BCH controller. Signed-off-by:
-
Paul Cercueil authored
The JZ4760 SoC has a hardware problem with chan0 not enabling properly if it's enabled before chan1, after a reset (works fine afterwards). This is worked around in the probe function by just enabling then disabling chan1. Signed-off-by:
-
Paul Cercueil authored
Extend the binding to support specifying a different request type for each direction. Signed-off-by:
-
Paul Cercueil authored
The JZ4760 and JZ4760B SoCs have two additional DMA controllers: the MDMA, which only supports memcpy operations, and the BDMA which is mostly used for transfer between memories and the BCH controller. The JZ4770 also features the same BDMA as in the JZ4760B, but does not seem to have a MDMA. Signed-off-by:
-
