- 22 Feb, 2022 12 commits
-
-
Geert Uytterhoeven authored
Pin groups lcd0_data{8,9,12,16,18} are subsets of lcd0_data24_0. Pin groups lcd1_data{8,9,12,16,18} are subsets of lcd1_data24. This reduces kernel size by 1008 bytes. Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/2018113779b3084c4175b04bb32acf2de0557a37.1640269757.git.geert+renesas@glider.be
-
Geert Uytterhoeven authored
Pin groups keysc_in[567] are subsets of keysc_in8. This reduces kernel size by 144 bytes. Signed-off-by:
-
Geert Uytterhoeven authored
Pin group hscif1_data_e can be an alias for hscif1_data_c. This reduces kernel size by 16 bytes. Signed-off-by:
-
Geert Uytterhoeven authored
Pin group cf_data8 is a subset of cf_data16. This reduces kernel size by 64 bytes. Signed-off-by:
-
Geert Uytterhoeven authored
Pin groups bsc_data{8,16} are subsets of bsc_data32. Pin groups bsc_rd_we{8,16} are subsets of bsc_rd_we32. This reduces kernel size by 232 bytes. Signed-off-by: -
Geert Uytterhoeven authored
The VIN_DATA_PIN_GROUP() macro and vin_data{12,16,} unions are used to define multiple VIN data groups with different numbers of lanes, while referring to a single array of data pins, thus saving memory. However, the same feature would be useful for other resizable buses, like MMC, SDHI, QSPI, LCD, BSC, ... Rework the mechanism for generic use: - Use the new SH_PFC_PIN_GROUP_SUBSET() helper to remove the need for bus-specific unions, - Rename VIN_DATA_PIN_GROUP() to BUS_DATA_PIN_GROUP(), - Rename the macro parameters to better reflect their purposes, - Move the macro up, where it belongs. Update all individual pin control drivers for the above changes. Signed-off-by: -
Geert Uytterhoeven authored
It is fairly common for the pins in a pin group to be a subset of the pins in another pin group. Add a macro for defining a pin group that refers to a subset of an array of pins. This allows pin groups to share pin data, and thus save memory. Signed-off-by:
-
Geert Uytterhoeven authored
Rename the arguments of the SH_PFC_PIN_GROUP_ALIAS() and SH_PFC_PIN_GROUP() macros, to better reflect their purposes. Signed-off-by:
-
Geert Uytterhoeven authored
Reformat all macros that define structure initializers, to visually resemble structure definitions: - Move the opening curly brace to the previous line, - Move the closing curly brace to the first position, - Reduce indentation of the block to a single TAB, decreasing the need for line breaks, - Align backslashes for line continuation to the last TAB block where possible, Signed-off-by: -
Geert Uytterhoeven authored
Some instances of struct sh_pfc_soc_operations are called "<soc>_pfc_ops", others are called "<soc>_pinmux_ops" or just "pinmux_ops". Settle on the first variant, to avoid confusion with "struct pinmux_ops" in the pinctrl core, and to increase consistency. Signed-off-by:
-
Geert Uytterhoeven authored
The second video-in channel on RZ/G1C has only 12 data lanes, but the pin control driver uses the vin_data union, which is meant for 24 data lanes, thus wasting space. Fix this by using the vin_data12 union instead. This reduces kernel size by 96 bytes. Fixes: 50f3f2d7 ("pinctrl: sh-pfc: Reduce kernel size for narrow VIN channels") Signed-off-by:
-
Geert Uytterhoeven authored
The .pin_to_pocctrl() implementation for R-Car E2 does not perform a full range check, unlike on all other SoCs. Add the range check, so the checker can validate better the consistency of the pin control tables. Signed-off-by:
-
- 08 Feb, 2022 6 commits
-
-
Biju Das authored
Update rzg2l_gpio_register() to use driver data for chip->names and check for gpio-range. This allows reusing the driver for SoC's with different port pin definitions(eg:- RZ/G2UL SoC has fewer ports compared to RZ/G2L and port pin definitions are different). Signed-off-by:
Biju Das <biju.das.jz@bp.renesas.com> Link: https://lore.kernel.org/r/20220206194614.13209-2-biju.das.jz@bp.renesas.comSigned-off-by:
-
Geert Uytterhoeven authored
Move the msiof* pin groups where they belong. Signed-off-by:
-
Geert Uytterhoeven authored
Move the du* pin function where it belongs. Signed-off-by:
-
Geert Uytterhoeven authored
Move the sdhi* pin functions where they belong. Signed-off-by:
-
Geert Uytterhoeven authored
Rename the MOD_SEL2_* definitions, to match the bitfield order in IPxSRy_* definitions and in MOD_SEL* definitions in other drivers. No changes in generated code. Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/4880e4cbc112ee26569bf29a21c070125461e58d.1642524603.git.geert+renesas@glider.be
-
Biju Das authored
RZ/V2L uses the RZ/G2L GPIO and pinctrl driver. Enable the RZ/G2L pinctrl driver if RZ/V2L is enabled. Update the description for RZ/V2L pin control support. Signed-off-by:
Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Link: https://lore.kernel.org/r/20220110134659.30424-8-prabhakar.mahadev-lad.rj@bp.renesas.com Link: https://lore.kernel.org/r/20220206194614.13209-1-biju.das.jz@bp.renesas.comSigned-off-by:
-
- 24 Jan, 2022 6 commits
-
-
Biju Das authored
Document Renesas RZ/V2L pinctrl bindings. The RZ/V2L SoC is package- and pin-compatible with RZ/G2L. No driver changes are required as the RZ/G2L compatible string "renesas,r9a07g044-pinctrl" will be used as a fallback. Signed-off-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20220110134659.30424-7-prabhakar.mahadev-lad.rj@bp.renesas.comSigned-off-by:
-
Nikita Yushchenko authored
This adds pins, groups, and functions for MediaLB devices on Renesas R-Car E3 and D3 SoCs. Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Link: https://lore.kernel.org/r/20211225191713.2187975-1-nikita.yoush@cogentembedded.comSigned-off-by:
-
Geert Uytterhoeven authored
The INTC_IRQx_N pin functions were only documented in preliminary versions of the R-Car M2 Hardware User's Manual, and were never used. This reduces kernel size by 40 bytes. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/932834b388887e1ae267e5a852c688c79091a5f9.1640269369.git.geert+renesas@glider.be
-
Geert Uytterhoeven authored
The INTC_IRQx_N pin functions were only documented in preliminary versions of the R-Car H2 Hardware User's Manual, and were never used. This reduces kernel size by 40 bytes. Signed-off-by:
-
Lad Prabhakar authored
Add description for "power-source" property mentioning the values in enum are in millivolt. Suggested-by:
Pavel Machek <pavel@denx.de> Signed-off-by:
-
Wolfram Sang authored
For Renesas PFCs not setting .strict, we can snoop GPIOs which are already muxed to some other function. To actually make use of that, we shouldn't mux them back to GPIO if they have been already muxed to something. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20211210113226.40111-1-wsa+renesas@sang-engineering.comSigned-off-by:
-
- 23 Jan, 2022 6 commits
-
-
Linus Torvalds authored
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Fix printing 'phys_addr' in 'perf script'. - Fix failure to add events with 'perf probe' in ppc64 due to not removing leading dot (ppc64 ABIv1). - Fix cpu_map__item() python binding building. - Support event alias in form foo-bar-baz, add pmu-events and parse-event tests for it. - No need to setup affinities when starting a workload or attaching to a pid. - Use path__join() to compose a path instead of ad-hoc snprintf() equivalent. - Override attr->sample_period for non-libpfm4 events. - Use libperf cpumap APIs instead of accessing the internal state directly. - Sync x86 arch prctl headers and files changed by the new set_mempolicy_home_node syscall with the kernel sources. - Remove duplicate include in cpumap.h. - Remove redundant err variable. * tag 'perf-tools-for-v5.17-2022-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf tools: Remove redundant err variable perf test: Add parse-events test for aliases with hyphens perf test: Add pmu-events test for aliases with hyphens perf parse-events: Support event alias in form foo-bar-baz perf evsel: Override attr->sample_period for non-libpfm4 events perf cpumap: Remove duplicate include in cpumap.h perf cpumap: Migrate to libperf cpumap api perf python: Fix cpu_map__item() building perf script: Fix printing 'phys_addr' failure issue tools headers UAPI: Sync files changed by new set_mempolicy_home_node syscall tools headers UAPI: Sync x86 arch prctl headers with the kernel sources perf machine: Use path__join() to compose a path instead of snprintf(dir, '/', filename) perf evlist: No need to setup affinities when disabling events for pid targets perf evlist: No need to setup affinities when enabling events for pid targets perf stat: No need to setup affinities when starting a workload perf affinity: Allow passing a NULL arg to affinity__cleanup() perf probe: Fix ppc64 'perf probe add events failed' case
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull ftrace fix from Steven Rostedt: "Fix s390 breakage from sorting mcount tables. The latest merge of the tracing tree sorts the mcount table at build time. But s390 appears to do things differently (like always) and replaces the sorted table back to the original unsorted one. As the ftrace algorithm depends on it being sorted, bad things happen when it is not, and s390 experienced those bad things. Add a new config to tell the boot if the mcount table is sorted or not, and allow s390 to opt out of it" * tag 'trace-v5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix assuming build time sort works for s390
-
Steven Rostedt (Google) authored
To speed up the boot process, as mcount_loc needs to be sorted for ftrace to work properly, sorting it at build time is more efficient than boot up and can save milliseconds of time. Unfortunately, this change broke s390 as it will modify the mcount_loc location after the sorting takes place and will put back the unsorted locations. Since the sorting is skipped at boot up if it is believed that it was sorted at run time, ftrace can crash as its algorithms are dependent on the list being sorted. Add a new config BUILDTIME_MCOUNT_SORT that is set when BUILDTIME_TABLE_SORT but not if S390 is set. Use this config to determine if sorting should take place at boot up. Link: https://lore.kernel.org/all/yt9dee51ctfn.fsf@linux.ibm.com/ Fixes: 72b3942a ("scripts: ftrace - move the sort-processing in ftrace_init") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Tested-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Steven Rostedt (Google) <rostedt@goodmis.org>
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Bring include/uapi/linux/nfc.h into the UAPI compile-test coverage - Revert the workaround of CONFIG_CC_IMPLICIT_FALLTHROUGH - Fix build errors in certs/Makefile * tag 'kbuild-fixes-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: certs: Fix build error when CONFIG_MODULE_SIG_KEY is empty certs: Fix build error when CONFIG_MODULE_SIG_KEY is PKCS#11 URI Revert "Makefile: Do not quote value for CONFIG_CC_IMPLICIT_FALLTHROUGH" usr/include/Makefile: add linux/nfc.h to the compile-test coverage
-
git://github.com/norov/linuxLinus Torvalds authored
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
-
- 22 Jan, 2022 10 commits
-
-
Minghao Chi authored
Return value from perf_event__process_tracing_data() directly instead of taking this in another redundant variable. Reported-by:
Zeal Robot <zealci@zte.com.cn> Signed-off-by:
Minghao Chi <chi.minghao@zte.com.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20220112080109.666800-1-chi.minghao@zte.com.cnSigned-off-by:
CGEL ZTE <cgel.zte@gmail.com> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
John Garry authored
Add a test which allows us to test parsing an event alias with hyphens. Since these events typically do not exist on most host systems, add the alias to the fake pmu. Function perf_pmu__test_parse_init() has terms added to match known test aliases. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Ian Rogers <irogers@google.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Qi Liu <liuqi115@huawei.com> Cc: Shaokun Zhang <zhangshaokun@hisilicon.com> Cc: linuxarm@huawei.com Link: https://lore.kernel.org/r/1642432215-234089-4-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Add a test for aliases with hyphens in the name to ensure that the pmu-events tables are as expects. There should be no reason why these sort of aliases would be treated differently, but no harm in checking. Signed-off-by:
-
John Garry authored
Event aliasing for events whose name in the form foo-bar-baz is not supported, while foo-bar, foo_bar_baz, and other combinations are, i.e. two hyphens are not supported. The HiSilicon D06 platform has events in such form: $ ./perf list sdir-home-migrate List of pre-defined events (to be used in -e): uncore hha: sdir-home-migrate [Unit: hisi_sccl,hha] $ sudo ./perf stat -e sdir-home-migrate event syntax error: 'sdir-home-migrate' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event>event selector. use 'perf list' to list available events To support, add an extra PMU event symbol type for "baz", and add a new rule in the bison file. Signed-off-by: -
German Gomez authored
A previous patch preventing "attr->sample_period" values from being overridden in pfm events changed a related behaviour in arm-spe. Before said patch: perf record -c 10000 -e arm_spe_0// -- sleep 1 Would yield an SPE event with period=10000. After the patch, the period in "-c 10000" was being ignored because the arm-spe code initializes sample_period to a non-zero value. This patch restores the previous behaviour for non-libpfm4 events. Fixes: ae5dcc8a (“perf record: Prevent override of attr->sample_period for libpfm4 events”) Reported-by:
Chase Conklin <chase.conklin@arm.com> Signed-off-by:
German Gomez <german.gomez@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: KP Singh <kpsingh@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Song Liu <songliubraving@fb.com> Cc: Stephane Eranian <eranian@google.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.comSigned-off-by:
-
Lv Ruyi authored
Remove all but the first include of stdbool.h from cpumap.h. Reported-by:
Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by:
-
Ian Rogers authored
Switch from directly accessing the perf_cpu_map to using the appropriate libperf API when possible. Using the API simplifies the job of refactoring use of perf_cpu_map. Signed-off-by:
-
Ian Rogers authored
Value should be built as an integer. Switch some uses of perf_cpu_map to use the library API. Fixes: 6d18804b ("perf cpumap: Give CPUs their own type") Signed-off-by:
-
Yao Jin authored
Perf script was failed to print the phys_addr for SPE profiling. One 'dummy' event is added by SPE profiling but it doesn't have PHYS_ADDR attribute set, perf script then exits with error. Now referring to 'addr', use evsel__do_check_stype() to check the type. Before: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr Samples for 'dummy:u' event do not have PHYS_ADDR attribute set. Cannot print 'phys_addr' field. After: # perf record -e arm_spe_0/branch_filter=0,ts_enable=1,pa_enable=1,load_filter=1,jitter=0,\ store_filter=0,min_latency=0,event_filter=2/ -p 4064384 -- sleep 3 # perf script -F pid,tid,addr,phys_addr 4064384/4064384 ffff802f921be0d0 2f921be0d0 4064384/4064384 ffff802f921be0d0 2f921be0d0 Reviewed-by:
Yao Jin <jinyao5@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20220121065954.2121900-1-liwei391@huawei.comSigned-off-by:
Wei Li <liwei391@huawei.com> Signed-off-by:
-
Masahiro Yamada authored
Since b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro"), when CONFIG_MODULE_SIG_KEY is empty, signing_key.x509 fails to build: CERT certs/signing_key.x509 Usage: extract-cert <source> <dest> make[1]: *** [certs/Makefile:78: certs/signing_key.x509] Error 2 make: *** [Makefile:1831: certs] Error 2 Pass "" to the first argument of extract-cert to fix the build error. Link: https://lore.kernel.org/linux-kbuild/20220120094606.2skuyb26yjlnu66q@lion.mk-sys.cz/T/#u Fixes: b8c96a6b ("certs: simplify $(srctree)/ handling and remove config_filename macro") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
-
