- 17 Jul, 2015 1 commit
-
-
Mika Kuoppala authored
Fix divide by zero if we end up updating the watermarks with zero dotclock. This is a stop gap measure to allow module load in cases where our state keeping fails. v2: WARN_ON added (Paulo) Cc: Paulo Zanoni <przanoni@gmail.com> Cc: Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Mika Kuoppala <mika.kuoppala@intel.com> Reviewed-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Reviewed-by:
Damien Lespiau <damien.lespiau@intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch>
-
- 15 Jul, 2015 16 commits
-
-
Daniel Vetter authored
Fastboot should only downgrade a modeset if we have a match, not be used to upgrade to a full modeset. Otherwise we can only use it in a very restricted way: Initial modeset when the request mode is the preferred one of the panel and there's still a pfit active. And that only works because our mode_from_pipe_config fills in the wrong mode (it takes the adjusted mode, not the requested one). But we want fast modesets everywhere even after boot-up (especially for testing, but not only there). Hence we need to be able to make any modeset a fast one, which means we need to invert the logic and optionally downgrade a modeset. Note that this needs ->connector_changed split out from ->mode_changed otherwise it's not going to work (because we might loose a modeset because connectors changed but otherwise the config matches). As soon as that's merged we can drop the i915.fastboot check from this code. Also make sure that we don't accidentally clear any_ms and that we add the planes for any kind of modeset. Finally rename fastboot to fastset (yeah it's a silly name) since this really isn't about booting all that much. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
Currently we both set mode->private_flags to some value and also use the pipe_config quirk. But since the pipe_config quirk isn't tied to the lifetime of the mode object we need to check both. Simplify this by only using mode.private_flags and stop using the INHERITED_MODE quirk. Also for clarity add an explicit #define for that driver priavete mode flag. By using crtc_state->mode_changed we can also remove the recalc local variable. Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
Now that we recompute the pipe config for all CRTCs that have changed we don't have problems with stale configuration data for the global pfit and can remove this hack. Yay! Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by:
-
Daniel Vetter authored
Backmerge fixes since it's getting out of hand again with the massive split due to atomic between -next and 4.2-rc. All the bugfixes in 4.2-rc are addressed already (by converting more towards atomic instead of minimal duct-tape) so just always pick the version in next for the conflicts in modeset code. All the other conflicts are just adjacent lines changed. Conflicts: drivers/gpu/drm/i915/i915_drv.h drivers/gpu/drm/i915/i915_gem_gtt.c drivers/gpu/drm/i915/intel_display.c drivers/gpu/drm/i915/intel_drv.h drivers/gpu/drm/i915/intel_ringbuffer.h Signed-off-by: -
Maarten Lankhorst authored
This can only fail because of a bug in the code. Suggested-by:
-
Maarten Lankhorst authored
We needed this originally for updating pagetables in plane commit functions. But that's extracted into prepare/cleanup now. The other issue was running updates when the pipe was off. That's also now fixed. Suggested-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
-
Maarten Lankhorst authored
Now that there's only a single path for all atomic updates we can call intel_(pre/post)_plane_update from intel_atomic_commit directly. This makes the intention more clear. Signed-off-by:
-
Maarten Lankhorst authored
Huzzah! \o/ Signed-off-by:
-
Arun Siluvery authored
In Indirect context w/a batch buffer, +WaSetDisablePixMaskCammingAndRhwoInCommonSliceChicken v2: SKL revision id was used for BXT, copy paste error found during internal review (Bob Beckett). v3: explain why part of the WA is in Per ctx batch (Mika) Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
Arun Siluvery <arun.siluvery@linux.intel.com> Reviewed-by:
-
Arun Siluvery authored
In Indirect context w/a batch buffer, +WaFlushCoherentL3CacheLinesAtContextSwitch:skl,bxt v2: address static checker warning where unsigned value was checked for less than zero which is never true (Dan Carpenter). v3: The WA uses default value of GEN8_L3SQCREG4 during flush but that disables some other WA; update default value to retain it and document dependency (Mika). Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Imre Deak <imre.deak@intel.com> Signed-off-by:
-
Arun Siluvery authored
In Indirect and Per context w/a batch buffer, +WaDisableCtxRestoreArbitration v2: SKL revision id was used for BXT, copy paste error found during internal review (Bob Beckett). v3: use updated macro. Reviewed-by:
-
Arun Siluvery authored
This patch only enables support for Gen9, the actual WA will be initialized in subsequent patches. The WARN that we use to warn user if WA batch support is not available for a particular Gen is replaced with DRM_ERROR as warning here doesn't really add much value. v2: include all infrastructure bits in this patch so that subsequent changes only correspond the WA added (Chris) v3: use updated macro. Reviewed-by:
-
Nick Hoath authored
v2: Patch leakage fixed Signed-off-by:
Nick Hoath <nicholas.hoath@intel.com> Reviewed-by:
-
Daniel Vetter authored
I was confused shortly whether the compat was needed for the int, until I noticed the pointer in the original. Also remove typedef. v2: Review from Chris. - Add comments. - Also change the int param in the original structure. Cc: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
-
Maarten Lankhorst authored
This fixes the breakage caused by commit eddfcbcd Author: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Date: Mon Jun 15 12:33:53 2015 +0200 drm/i915: Update less state during modeset. No need to repeatedly call update_watermarks, or update_fbc. Down to a single call to update_watermarks in .crtc_enable Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Tested-by(IVB): Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
Fill in driver type, hsync, vrefresh and name. Those members are not read out but can be calculated from the mode. Signed-off-by:
-
- 14 Jul, 2015 23 commits
-
-
Akash Goel authored
Updated the HAS_CORE_RING_FREQ macro to add the broxton check, so as to disallow the programming & read of ring frequency table for it. Issue: VIZ-5144 Suggested-by:
Akash Goel <akash.goel@intel.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Akash Goel authored
Added a new HAS_CORE_RING_FREQ macro, currently used in gen6_update_ring_freq & i915_ring_freq_table debugfs function. The programming & read of ring frequency table is needed for newer GEN(>=6) platforms, except VLV/CHV. Issue: VIZ-5144 Suggested-by:
-
Maarten Lankhorst authored
Calculate all state using a normal transition, but afterwards fudge crtc->state->active back to its old value. This should still allow state restore in setup_hw_state to work properly. Signed-off-by:
-
Maarten Lankhorst authored
And get rid of things that are no longer true. This function is only used for forcing a modeset when encoder properties are changed. Because this is not yet done atomically, assume a full modeset is needed and force a modeset on the crtc. Changes since v1: - s/reset/force modeset/ Signed-off-by:
-
Maarten Lankhorst authored
This allows us to get rid of the set_init_power in modeset_update_crtc_domains. The state should be sanitized enough after setup_hw_state to not need the init power. Signed-off-by:
-
Maarten Lankhorst authored
The previous commit converted hw readout to atomic, all the new_* members were used for restoring the old state, but with the conversion of suspend to atomic there's no use left for them. Signed-off-by:
-
Maarten Lankhorst authored
Instead of all the ad-hoc updating, duplicate the old state first before reading out the hw state, then restore it. intel_display_resume is a new function that duplicates the sw state, then reads out the hw state, and commits the old state. intel_display_setup_hw_state now only reads out the atomic state. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=90396Signed-off-by:
-
Maarten Lankhorst authored
drm/i915: Readout initial hw mode, v2. Atomic requires a mode blob when crtc_state->enable is true, or you get a huge warn_on. With a few tweaks the mode we read out from hardware could be used as the real mode without a modeset, but this requires too much testing, so for now force a modeset the first time the mode blob's updated. This preserves the old behavior, because previously we never set the initial mode, which always meant that a modeset happened when the mode was first set. Changes since v1: - Add a description in intel_modeset_readout_hw_state of how the recalculation is done. Signed-off-by:
-
Maarten Lankhorst authored
This is required to properly initialize vblanks on the active crtc. Without it drm_calc_vbltimestamp_from_scanoutpos can fail with crtc 0: Noop due to uninitialized mode. Signed-off-by:
-
Maarten Lankhorst authored
There is a WARN_ON in drm_atomic_crtc_check for this when exposing the atomic property. If the mode_blob still exists, but enable = false then all updates are rejected with -EINVAL. Signed-off-by:
-
Maarten Lankhorst authored
Unreference the old mode_blob by calling the crtc_destroy_state helper before zeroing the crtc_state. Signed-off-by:
-
Maarten Lankhorst authored
All non-primary planes get disabled during hw readout, this reduces complexity and means not having to do some plane visibility checks during the first commit. Signed-off-by:
-
Peter Antoine authored
This change adds the programming of the MOCS registers to the gen 9+ platforms. The set of MOCS configuration entries introduced by this patch is intended to be minimal but sufficient to cover the needs of current userspace - i.e. a good set of defaults. It is expected to be extended in the future to provide further default values or to allow userspace to redefine its private MOCS tables based on its demand for additional caching configurations. In this setup, userspace should only utilize the first N entries, higher entries are reserved for future use. It creates a fixed register set that is programmed across the different engines so that all engines have the same table. This is done as the main RCS context only holds the registers for itself and the shared L3 values. By trying to keep the registers consistent across the different engines it should make the programming for the registers consistent. v2: -'static const' for private data structures and style changes.(Matt Turner) v3: - Make the tables "slightly" more readable. (Damien Lespiau) - Updated tables fix performance regression. v4: - Code formatting. (Chris Wilson) - re-privatised mocs code. (Daniel Vetter) v5: - Changed the name of a function. (Chris Wilson) v6: - re-based - Added Mesa table entry (skylake & broxton) (Francisco Jerez) - Tidied up the readability defines (Francisco Jerez) - NUMBER of entries defines wrong. (Jim Bish) - Added comments to clear up the meaning of the tables (Jim Bish) Signed-off-by:
Peter Antoine <peter.antoine@intel.com> v7 (Francisco Jerez): - Don't write L3-specific MOCS_ESC/SCC values into the e/LLC control tables. Prefix L3-specific defines consistently with L3_ and e/LLC-specific defines with LE_ to avoid this kind of confusion in the future. - Change L3CC WT define back to RESERVED (matches my hardware documentation and the original patch, probably a misunderstanding of my own previous comment). - Drop Android tables, define new minimal tables more suitable for the open source stack. - Add comment that the MOCS tables are part of the kernel ABI. - Move intel_logical_ring_begin() and _advance() calls one level down (Chris Wilson). - Minor formatting and style fixes. v8 (Francisco Jerez): - Add table size sanity check to emit_mocs_control/l3cc_table() (Chris Wilson). - Add comment about undefined entries being implicitly set to uncached for forwards compatibility. v9 (Francisco Jerez): - Minor style fixes. Signed-off-by:
Francisco Jerez <currojerez@riseup.net> Acked-by:
-
Daniel Vetter authored
Totatlly forgotten that we have these when nuking all the UMS code. Signed-off-by:
-
Maarten Lankhorst authored
Nothing depends on this outside initial hw readout, so keep this struct on the stack instead. Changes since v1: - Remove unrelated changes. Signed-off-by:
-
Maarten Lankhorst authored
The src and crtc rectangles were never set, resulting in the primary plane being made invisible on first atomic update. Signed-off-by:
-
Maarten Lankhorst authored
Instead of doing ad-hoc checks we already have a way of checking if the state is compatible or not. Use this to force a modeset. Only during modesets, or with PIPE_CONFIG_QUIRK_INHERITED_MODE we should check if a full modeset is really needed. Fastboot will allow the adjust parameter to ignore some stuff too, and it will fix up differences in state that are ignored by the compare function. Changes since v1: - Increase the value of the lowest m/n to prevent truncation. - Dump pipe config when fastboot's used, without a modeset. - Add adjust parameter to intel_compare_link_m_n, which is used to adjust m2_n2 if it's a multiple of m_n. - Add exact parameter intel_compare_m_n. Signed-off-by:
-
Maarten Lankhorst authored
Use the atomic state instead, this allows removing plane_config from the crtc after the full hw readout is completed. The size can be found in the fb, no need for the plane_config. Signed-off-by:
-
Maarten Lankhorst authored
There's not much point for calculating the changes for the old state. Instead just disable all scalers when disabling. It's probably good enough to just disable the crtc_scaler, but just in case there's a bug disable all scalers. This means intel_atomic_setup_scalers is only called in the crtc check function now, so all the transitional code can be removed. Signed-off-by:
-
Maarten Lankhorst authored
This is probably hard to hit right now because in most cases all atomic locks are taken, but after conversion to atomic this will make it more likely to corrupt the crtc->config pointer, resulting in hard to find bugs. Signed-off-by:
-
Maarten Lankhorst authored
When resuming with dpms off, the following warn can happen: [ 118.334082] ------------[ cut here ]------------ [ 118.334105] WARNING: CPU: 2 PID: 2274 at drivers/gpu/drm/i915/intel_display.c:6319 __intel_set_mode+0xae5/0xb90 [i915]() [ 118.334106] WARN_ON(!crtc->state->enable) [ 118.334137] Modules linked in: i915 [ 118.334139] CPU: 2 PID: 2274 Comm: kworker/u16:117 Not tainted 4.2.0-rc2-fixes+ #4148 [ 118.334140] Hardware name: LENOVO 2349AV8/2349AV8, BIOS G1ETA5WW (2.65 ) 04/15/2014 [ 118.334144] Workqueue: events_unbound async_run_entry_fn [ 118.334147] ffffffffc017eef0 ffff8800ada93998 ffffffff817aa62a 0000000080000001 [ 118.334149] ffff8800ada939e8 ffff8800ada939d8 ffffffff810807e1 ffff8800ada939c8 [ 118.334151] ffff8800cea3b3d8 0000000000000000 ffff8800ad86b008 ffff880117705668 [ 118.334151] Call Trace: [ 118.334155] [<ffffffff817aa62a>] dump_stack+0x4f/0x7b [ 118.334157] [<ffffffff810807e1>] warn_slowpath_common+0x81/0xc0 [ 118.334158] [<ffffffff81080861>] warn_slowpath_fmt+0x41/0x50 [ 118.334173] [<ffffffffc0120375>] __intel_set_mode+0xae5/0xb90 [i915] [ 118.334188] [<ffffffffc0121312>] ? intel_modeset_compute_config+0x52/0xb40 [i915] [ 118.334191] [<ffffffff8144de53>] ? drm_atomic_set_fb_for_plane+0x63/0x80 [ 118.334205] [<ffffffffc01269d9>] intel_set_mode+0x29/0x60 [i915] [ 118.334219] [<ffffffffc012730a>] intel_crtc_restore_mode+0x13a/0x1f0 [i915] [ 118.334232] [<ffffffffc0101160>] ? gen6_write16+0x250/0x250 [i915] [ 118.334246] [<ffffffffc01283ec>] intel_modeset_setup_hw_state+0x89c/0xcd0 [i915] [ 118.334248] [<ffffffff8137d260>] ? pci_pm_thaw+0x90/0x90 [ 118.334255] [<ffffffffc00ac11b>] i915_drm_resume+0xcb/0x160 [i915] [ 118.334262] [<ffffffffc00ac1d2>] i915_pm_resume+0x22/0x30 [i915] [ 118.334263] [<ffffffff8137d2c3>] pci_pm_resume+0x63/0xa0 [ 118.334266] [<ffffffff81467550>] dpm_run_callback+0x70/0x420 [ 118.334267] [<ffffffff81467cbd>] device_resume+0x9d/0x1c0 [ 118.334269] [<ffffffff814673d0>] ? initcall_debug_start+0x60/0x60 [ 118.334270] [<ffffffff81467dfc>] async_resume+0x1c/0x50 [ 118.334271] [<ffffffff810a6a94>] async_run_entry_fn+0x34/0xd0 [ 118.334273] [<ffffffff8109d4ad>] process_one_work+0x1dd/0x7e0 [ 118.334275] [<ffffffff8109d41a>] ? process_one_work+0x14a/0x7e0 [ 118.334276] [<ffffffff8109daf9>] worker_thread+0x49/0x450 [ 118.334278] [<ffffffff8109dab0>] ? process_one_work+0x7e0/0x7e0 [ 118.334280] [<ffffffff810a3cb9>] kthread+0xf9/0x110 [ 118.334282] [<ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90 [ 118.334284] [<ffffffff817b414f>] ret_from_fork+0x3f/0x70 [ 118.334286] [<ffffffff810a3bc0>] ? insert_kthread_work+0x90/0x90 [ 118.334287] ---[ end trace 01f2cf6371b82d7a ]--- This warn is harmless, and can be fixed by not calling intel_crtc_disable when the crtc is already disabled. Reported-and-Tested-by:
Jörg Otte <jrg.otte@gmail.com> Signed-off-by:
-
Daniel Vetter authored
This reverts commit 19ee835c. It breaks existing old userspace which doesn't handle UNKNOWN swizzling correct. Yes UNKNOWN was a thing back in 2009 and probably still is on some other platforms, but it still pretty clearly broke the testers machine. If we want this we need to extend the ioctl with new paramters that only new userspace looks at. Cc: Harald Arnesen <harald@skogtun.org> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reported-by:
Harald Arnesen <harald@skogtun.org> Cc: stable@vger.kernel.org Signed-off-by:
-
Akash Goel authored
Ring frequency table programming is not required on BXT. Added separate checks to enable the programming only for SKL & skip for BXT. v2: Removed the BXT check from gen6_update_ring_freq function Issue: VIZ-5144 Signed-off-by:
-
