When CONFIG_DEBUG_KMAP_LOCAL is enabled __kmap_local_sched_{in,out} check
that even slots in the tsk->kmap_ctrl.pteval are unmapped.  The slots are
initialized with 0 value, but the check is done with pte_none.  0 pte
however does not necessarily mean that pte_none will return true.  e.g.
on xtensa it returns false, resulting in the following runtime warnings:

 WARNING: CPU: 0 PID: 101 at mm/highmem.c:627 __kmap_local_sched_out+0x51/0x108
 CPU: 0 PID: 101 Comm: touch Not tainted 5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
 Call Trace:
   dump_stack+0xc/0x40
   __warn+0x8f/0x174
   warn_slowpath_fmt+0x48/0xac
   __kmap_local_sched_out+0x51/0x108
   __schedule+0x71a/0x9c4
   preempt_schedule_irq+0xa0/0xe0
   common_exception_return+0x5c/0x93
   do_wp_page+0x30e/0x330
   handle_mm_fault+0xa70/0xc3c
   do_page_fault+0x1d8/0x3c4
   common_exception+0x7f/0x7f

 WARNING: CPU: 0 PID: 101 at mm/highmem.c:664 __kmap_local_sched_in+0x50/0xe0
 CPU: 0 PID: 101 Comm: touch Tainted: G        W         5.17.0-rc7-00010-gd3a1cdde80d2-dirty #13
 Call Trace:
   dump_stack+0xc/0x40
   __warn+0x8f/0x174
   warn_slowpath_fmt+0x48/0xac
   __kmap_local_sched_in+0x50/0xe0
   finish_task_switch$isra$0+0x1ce/0x2f8
   __schedule+0x86e/0x9c4
   preempt_schedule_irq+0xa0/0xe0
   common_exception_return+0x5c/0x93
   do_wp_page+0x30e/0x330
   handle_mm_fault+0xa70/0xc3c
   do_page_fault+0x1d8/0x3c4
   common_exception+0x7f/0x7f

Fix it by replacing !pte_none(pteval) with pte_val(pteval) != 0.

Link: https://lkml.kernel.org/r/20220403235159.3498065-1-jcmvbkbc@gmail.com
Fixes: 5fbda3ec ("sched: highmem: Store local kmaps in task struct")
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Fix a VM_BUG_ON_FOLIO(folio_nr_pages(old) != nr_pages) crash.

With folios support, it is possible to have other than HPAGE_PMD_ORDER
THPs, in the form of folios, in the system.  Use thp_order() to correctly
determine the source page order during migration.

Link: https://lkml.kernel.org/r/20220404165325.1883267-1-zi.yan@sent.com
Link: https://lore.kernel.org/linux-mm/20220404132908.GA785673@u2004/
Fixes: d68eccad ("mm/filemap: Allow large folios to be added to the page cache")
Reported-by: Naoya Horiguchi <naoya.horiguchi@linux.dev>
Signed-off-by: Zi Yan <ziy@nvidia.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull spi fixes from Mark Brown:
 "A small collection of fixes that have arrived since the merge window,
  the most noticable one is a fix for unmapping messages when the
  mapping was done with the struct device supplied to do the mapping
  overridden"

* tag 'spi-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()
  spi: cadence-quadspi: fix protocol setup for non-1-1-X operations
  spi: core: add dma_map_dev for __spi_unmap_msg()
  spi: mxic: Fix an error handling path in mxic_spi_probe()
  spi: rpc-if: Fix RPM imbalance in probe error path

Merge tag 'regulator-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "A few small driver specific fixes for v5.18, plus an update to the
  MAINTAINERS file"

* tag 'regulator-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  MAINTAINERS: Fix reviewer info for a few ROHM ICs
  regulator: atc260x: Fix missing active_discharge_on setting
  regulator: rtq2134: Fix missing active_discharge_on setting
  regulator: wm8994: Add an off-on delay for WM8994 variant

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Improve API to make it clear that mmc_hw_reset() is for cards
   - Fixup support for writeback-cache for eMMC and SD
   - Check for errors after writes on SPI

  MMC host:
   - renesas_sdhi: A couple of fixes of TAP settings for eMMC HS400 mode
   - mmci_stm32: Fixup check of all elements in sg list
   - sdhci-xenon: Revert unnecessary fix for annoying 1.8V regulator warning"

* tag 'mmc-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: improve API to make clear mmc_hw_reset is for cards
  mmc: renesas_sdhi: don't overwrite TAP settings when HS400 tuning is complete
  mmc: renesas_sdhi: special 4tap settings only apply to HS400
  mmc: core: Fixup support for writeback-cache for eMMC and SD
  mmc: block: Check for errors after write on SPI
  mmc: mmci: stm32: correctly check all elements of sg list
  Revert "mmc: sdhci-xenon: fix annoying 1.8V regulator warning"

Pull iommu fix from Joerg Roedel:

 - Fix boot regression due to a NULL-ptr dereference on OMAP machines

* tag 'iommu-fix-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
  iommu/omap: Fix regression in probe for NULL pointer dereference

The email backend used by ROHM keeps labeling patches as spam.
Additionally, there have been reports of some emails been completely
dropped. Finally also the email list (or shared inbox)
linux-power@fi.rohmeurope.com inadvertly stopped working and has not
been reviwed during the past few weeks.

Remove no longer working list 'linux-power' list-entry and switch my
email to use the personal gmail account instead of the company account.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/Yk/zAHusOdf4+h06@dc73szyh141qn5ck3nwqy-3.rev.dnainternet.fiSigned-off-by: Mark Brown <broonie@kernel.org>

Commit 3f6634d9 ("iommu: Use right way to retrieve iommu_ops") started
triggering a NULL pointer dereference for some omap variants:

__iommu_probe_device from probe_iommu_group+0x2c/0x38
probe_iommu_group from bus_for_each_dev+0x74/0xbc
bus_for_each_dev from bus_iommu_probe+0x34/0x2e8
bus_iommu_probe from bus_set_iommu+0x80/0xc8
bus_set_iommu from omap_iommu_init+0x88/0xcc
omap_iommu_init from do_one_initcall+0x44/0x24

This is caused by omap iommu probe returning 0 instead of ERR_PTR(-ENODEV)
as noted by Jason Gunthorpe <jgg@ziepe.ca>.

Looks like the regression already happened with an earlier commit
6785eb91 ("iommu/omap: Convert to probe/release_device() call-backs")
that changed the function return type and missed converting one place.

Cc: Drew Fustini <dfustini@baylibre.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Suman Anna <s-anna@ti.com>
Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Fixes: 6785eb91 ("iommu/omap: Convert to probe/release_device() call-backs")
Fixes: 3f6634d9 ("iommu: Use right way to retrieve iommu_ops")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tested-by: Drew Fustini <dfustini@baylibre.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20220331062301.24269-1-tony@atomide.comSigned-off-by: Joerg Roedel <jroedel@suse.de>

To make it unambiguous that mmc_hw_reset() is for cards and not for
controllers, we make the function argument mmc_card instead of mmc_host.
Also, all users are converted.
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220408080045.6497-2-wsa+renesas@sang-engineering.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull drm fixes from Dave Airlie:
 "Main set of fixes for rc2, mostly amdgpu, but some dma-fence fixups as
  well, along with some other misc ones.

  dma-fence:
   - fix warning about fence containers
   - fix logic error in new fence merge code
   - handle empty dma_fence_arrays gracefully

  bridge:
   - Try all possible cases for bridge/panel detection.

  bindings:
   - Don't require input port for MIPI-DSI, and make width/height mandatory.

  fbdev:
   - Fix unregistering of framebuffers without device.

  nouveau:
   - Fix a crash when booting with nouveau on tegra.

  amdgpu:
   - GFX 10.3.7 fixes
   - noretry updates
   - VCN fixes
   - TMDS fix
   - zstate fix for freesync video
   - DCN 3.1.5 fix
   - Display stack size fix
   - Audio fix
   - DCN 3.1 pstate fix
   - TMZ VCN fix
   - APU passthrough fix
   - Misc other fixes
   - VCN 3.0 fixes
   - Misc display fixes
   - GC 10.3 golden register fix
   - Suspend fix
   - SMU 10 fix

  amdkfd:
   - Error handling fix
   - xgmi p2p fix
   - HWS VMIDs fix
   - Event fix

  panel:
   - ili9341: Fix optional regulator handling

  imx:
   - Catch an EDID allocation failure in imx-ldb
   - fix a leaked drm display mode on DT parsing error in parallel-display
   - properly remove the dw_hdmi bridge in case the component_add fails in dw_hdmi-imx
   - fix the IPU clock frequency debug printout in ipu-di"

* tag 'drm-fixes-2022-04-08' of git://anongit.freedesktop.org/drm/drm: (61 commits)
  dt-bindings: display: panel: mipi-dbi-spi: Make width-mm/height-mm mandatory
  fbdev: Fix unregistering of framebuffers without device
  drm/amdgpu/smu10: fix SoC/fclk units in auto mode
  drm/amd/display: update dcn315 clock table read
  drm/amdgpu/display: change pipe policy for DCN 2.1
  drm/amd/display: Add configuration options for AUX wake work around.
  drm/amd/display: remove assert for odm transition case
  drm/amdgpu: don't use BACO for reset in S3
  drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bw
  drm/amdkfd: Create file descriptor after client is added to smi_clients list
  drm/amdgpu: Sync up header and implementation to use the same parameter names
  drm/amdgpu: fix incorrect GCR_GENERAL_CNTL address
  amd/display: set backlight only if required
  drm/amd/display: Fix allocate_mst_payload assert on resume
  drm/amd/display: Revert FEC check in validation
  drm/amd/display: Add work around for AUX failure on wake.
  drm/amd/display: Clear optc false state when disable otg
  drm/amd/display: Enable power gating before init_pipes
  drm/amd/display: Remove redundant dsc power gating from init_hw
  drm/amd/display: Correct Slice reset calculation
  ...

Pull cifs client fixes from Steve French:

 - reconnect fixes: one for DFS and one to avoid a reconnect race

 - small change to deal with upcoming behavior change of list iterators

* tag '5.18-rc1-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: update internal module number
  cifs: force new session setup and tcon for dfs
  cifs: remove check of list iterator against head past the loop body
  cifs: fix potential race with cifsd thread

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf and netfilter.

  Current release - new code bugs:

   - mctp: correct mctp_i2c_header_create result

   - eth: fungible: fix reference to __udivdi3 on 32b builds

   - eth: micrel: remove latencies support lan8814

  Previous releases - regressions:

   - bpf: resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT

   - vrf: fix packet sniffing for traffic originating from ip tunnels

   - rxrpc: fix a race in rxrpc_exit_net()

   - dsa: revert "net: dsa: stop updating master MTU from master.c"

   - eth: ice: fix MAC address setting

  Previous releases - always broken:

   - tls: fix slab-out-of-bounds bug in decrypt_internal

   - bpf: support dual-stack sockets in bpf_tcp_check_syncookie

   - xdp: fix coalescing for page_pool fragment recycling

   - ovs: fix leak of nested actions

   - eth: sfc:
      - add missing xdp queue reinitialization
      - fix using uninitialized xdp tx_queue

   - eth: ice:
      - clear default forwarding VSI during VSI release
      - fix broken IFF_ALLMULTI handling
      - synchronize_rcu() when terminating rings

   - eth: qede: confirm skb is allocated before using

   - eth: aqc111: fix out-of-bounds accesses in RX fixup

   - eth: slip: fix NPD bug in sl_tx_timeout()"

* tag 'net-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
  drivers: net: slip: fix NPD bug in sl_tx_timeout()
  bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
  bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
  myri10ge: fix an incorrect free for skb in myri10ge_sw_tso
  net: usb: aqc111: Fix out-of-bounds accesses in RX fixup
  qede: confirm skb is allocated before using
  net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=n
  net: phy: mscc-miim: reject clause 45 register accesses
  net: axiemac: use a phandle to reference pcs_phy
  dt-bindings: net: add pcs-handle attribute
  net: axienet: factor out phy_node in struct axienet_local
  net: axienet: setup mdio unconditionally
  net: sfc: fix using uninitialized xdp tx_queue
  rxrpc: fix a race in rxrpc_exit_net()
  net: openvswitch: fix leak of nested actions
  net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()
  net: openvswitch: don't send internal clone attribute to the userspace.
  net: micrel: Fix KS8851 Kconfig
  ice: clear cmd_type_offset_bsz for TX rings
  ice: xsk: fix VSI state check in ice_xsk_wakeup()
  ...

drm-misc-fixes for v5.18-rc2:
- Fix a crash when booting with nouveau on tegra.
- Don't require input port for MIPI-DSI, and make width/height mandatory.
- Fix unregistering of framebuffers without device.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/58fa2262-3eb6-876d-7157-ab7a135696b7@linux.intel.com

Merge tag 'drm-misc-next-fixes-2022-04-07' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes

drm-misc-next-fixes for v5.18-rc2:
- fix warning about fence containers
- fix logic error in new fence merge code
- handle empty dma_fence_arrays gracefully
- Try all possible cases for bridge/panel detection.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3b8e6439-612e-f640-e380-51e834393e94@linux.intel.com

Merge tag 'hyperv-fixes-signed-20220407' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux

Pull hyperv fixes from Wei Liu:

 - Correctly propagate coherence information for VMbus devices (Michael
   Kelley)

 - Disable balloon and memory hot-add on ARM64 temporarily (Boqun Feng)

 - Use barrier to prevent reording when reading ring buffer (Michael
   Kelley)

 - Use virt_store_mb in favour of smp_store_mb (Andrea Parri)

 - Fix VMbus device object initialization (Andrea Parri)

 - Deactivate sysctl_record_panic_msg on isolated guest (Andrea Parri)

 - Fix a crash when unloading VMbus module (Guilherme G. Piccoli)

* tag 'hyperv-fixes-signed-20220407' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
  Drivers: hv: vmbus: Replace smp_store_mb() with virt_store_mb()
  Drivers: hv: balloon: Disable balloon and hot-add accordingly
  Drivers: hv: balloon: Support status report for larger page sizes
  Drivers: hv: vmbus: Prevent load re-ordering when reading ring buffer
  PCI: hv: Propagate coherence from VMbus device to PCI device
  Drivers: hv: vmbus: Propagate VMbus coherence to each VMbus device
  Drivers: hv: vmbus: Fix potential crash on module unload
  Drivers: hv: vmbus: Fix initialization of device object in vmbus_device_register()
  Drivers: hv: vmbus: Deactivate sysctl_record_panic_msg by default in isolated guests

Pull random number generator fixes from Jason Donenfeld:

 - Another fixup to the fast_init/crng_init split, this time in how much
   entropy is being credited, from Jan Varho.

 - As discussed, we now opportunistically call try_to_generate_entropy()
   in /dev/urandom reads, as a replacement for the reverted commit. I
   opted to not do the more invasive wait_for_random_bytes() change at
   least for now, preferring to do something smaller and more obvious
   for the time being, but maybe that can be revisited as things evolve
   later.

 - Userspace can use FUSE or userfaultfd or simply move a process to
   idle priority in order to make a read from the random device never
   complete, which breaks forward secrecy, fixed by overwriting
   sensitive bytes early on in the function.

 - Jann Horn noticed that /dev/urandom reads were only checking for
   pending signals if need_resched() was true, a bug going back to the
   genesis commit, now fixed by always checking for signal_pending() and
   calling cond_resched(). This explains various noticeable signal
   delivery delays I've seen in programs over the years that do long
   reads from /dev/urandom.

 - In order to be more like other devices (e.g. /dev/zero) and to
   mitigate the impact of fixing the above bug, which has been around
   forever (users have never really needed to check the return value of
   read() for medium-sized reads and so perhaps many didn't), we now
   move signal checking to the bottom part of the loop, and do so every
   PAGE_SIZE-bytes.

* tag 'random-5.18-rc2-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
  random: check for signals every PAGE_SIZE chunk of /dev/[u]random
  random: check for signal_pending() outside of need_resched() check
  random: do not allow user to keep crng key around on stack
  random: opportunistically initialize on /dev/urandom reads
  random: do not split fast init input in add_hwgenerator_randomness()

Pull ata fixes from Damien Le Moal:

 - Fix a compilation warning due to an uninitialized variable in
   ata_sff_lost_interrupt(), from me.

 - Fix invalid internal command tag handling in the sata_dwc_460ex
   driver, from Christian.

 - Disable READ LOG DMA EXT with Samsung 840 EVO SSDs as this command
   causes the drives to hang, from Christian.

 - Change the config option CONFIG_SATA_LPM_POLICY back to its original
   name CONFIG_SATA_LPM_MOBILE_POLICY to avoid potential problems with
   users losing their configuration (as discussed during the merge
   window), from Mario.

* tag 'ata-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item back
  ata: libata-core: Disable READ LOG DMA EXT for Samsung 840 EVOs
  ata: sata_dwc_460ex: Fix crash due to OOB write
  ata: libata-sff: Fix compilation warning in ata_sff_lost_interrupt()

When HS400 tuning is complete and HS400 is going to be activated, we
have to keep the current number of TAPs and should not overwrite them
with a hardcoded value. This was probably a copy&paste mistake when
upporting HS400 support from the BSP.

Fixes: 26eb2607 ("mmc: renesas_sdhi: add eMMC HS400 mode support")
Reported-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20220404114902.12175-1-wsa+renesas@sang-engineering.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

When a slip driver is detaching, the slip_close() will act to
cleanup necessary resources and sl->tty is set to NULL in
slip_close(). Meanwhile, the packet we transmit is blocked,
sl_tx_timeout() will be called. Although slip_close() and
sl_tx_timeout() use sl->lock to synchronize, we don`t judge
whether sl->tty equals to NULL in sl_tx_timeout() and the
null pointer dereference bug will happen.

   (Thread 1)                 |      (Thread 2)
                              | slip_close()
                              |   spin_lock_bh(&sl->lock)
                              |   ...
...                           |   sl->tty = NULL //(1)
sl_tx_timeout()               |   spin_unlock_bh(&sl->lock)
  spin_lock(&sl->lock);       |
  ...                         |   ...
  tty_chars_in_buffer(sl->tty)|
    if (tty->ops->..) //(2)   |
    ...                       |   synchronize_rcu()

We set NULL to sl->tty in position (1) and dereference sl->tty
in position (2).

This patch adds check in sl_tx_timeout(). If sl->tty equals to
NULL, sl_tx_timeout() will goto out.
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20220405132206.55291-1-duoming@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Alexei Starovoitov says:

====================
pull-request: bpf 2022-04-06

We've added 8 non-merge commits during the last 8 day(s) which contain
a total of 9 files changed, 139 insertions(+), 36 deletions(-).

The main changes are:

1) rethook related fixes, from Jiri and Masami.

2) Fix the case when tracing bpf prog is attached to struct_ops, from Martin.

3) Support dual-stack sockets in bpf_tcp_check_syncookie, from Maxim.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack sockets
  bpf: Support dual-stack sockets in bpf_tcp_check_syncookie
  bpf: selftests: Test fentry tracing a struct_ops program
  bpf: Resolve to prog->aux->dst_prog->type only for BPF_PROG_TYPE_EXT
  rethook: Fix to use WRITE_ONCE() for rethook:: Handler
  selftests/bpf: Fix warning comparing pointer to 0
  bpf: Fix sparse warnings in kprobe_multi_resolve_syms
  bpftool: Explicit errno handling in skeletons
====================

Link: https://lore.kernel.org/r/20220407031245.73026-1-alexei.starovoitov@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make the width-mm/height-mm panel properties mandatory
to correctly report the panel dimensions to the OS.

Fixes: 2f3468b8 ("dt-bindings: display: add bindings for MIPI DBI compatible SPI panels")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Robert Foss <robert.foss@linaro.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220404192105.12547-1-marex@denx.de

Merge tag 'amd-drm-fixes-5.18-2022-04-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.18-2022-04-06:

amdgpu:
- VCN 3.0 fixes
- DCN 3.1.5 fix
- Misc display fixes
- GC 10.3 golden register fix
- Suspend fix
- SMU 10 fix

amdkfd:
- Event fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406170441.5779-1-alexander.deucher@amd.com

drm/imx: error handling and debug output fixes

Catch an EDID allocation failure in imx-ldb, fix a leaked drm display
mode on DT parsing error in parallel-display, properly remove the
dw_hdmi bridge in case the component_add fails in dw_hdmi-imx, and
fix the IPU clock frequency debug printout in ipu-di.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220406155101.1271845-1-p.zabel@pengutronix.de

 * drm/panel/ili9341: Fix optional regulator handling
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YjwkvPp6UnePy4Q8@linux-uq9g.fritz.box

Merge tag 'amd-drm-next-5.18-2022-03-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-next-5.18-2022-03-25:

amdgpu:
- GFX 10.3.7 fixes
- noretry updates
- VCN fixes
- TMDS fix
- zstate fix for freesync video
- DCN 3.1.5 fix
- Display stack size fix
- Audio fix
- DCN 3.1 pstate fix
- TMZ VCN fix
- APU passthrough fix
- Misc other fixes

amdkfd:
- Error handling fix
- xgmi p2p fix
- HWS VMIDs fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220325183602.5718-1-alexander.deucher@amd.com

In 1448769c ("random: check for signal_pending() outside of
need_resched() check"), Jann pointed out that we previously were only
checking the TIF_NOTIFY_SIGNAL and TIF_SIGPENDING flags if the process
had TIF_NEED_RESCHED set, which meant in practice, super long reads to
/dev/[u]random would delay signal handling by a long time. I tried this
using the below program, and indeed I wasn't able to interrupt a
/dev/urandom read until after several megabytes had been read. The bug
he fixed has always been there, and so code that reads from /dev/urandom
without checking the return value of read() has mostly worked for a long
time, for most sizes, not just for <= 256.

Maybe it makes sense to keep that code working. The reason it was so
small prior, ignoring the fact that it didn't work anyway, was likely
because /dev/random used to block, and that could happen for pretty
large lengths of time while entropy was gathered. But now, it's just a
chacha20 call, which is extremely fast and is just operating on pure
data, without having to wait for some external event. In that sense,
/dev/[u]random is a lot more like /dev/zero.

Taking a page out of /dev/zero's read_zero() function, it always returns
at least one chunk, and then checks for signals after each chunk. Chunk
sizes there are of length PAGE_SIZE. Let's just copy the same thing for
/dev/[u]random, and check for signals and cond_resched() for every
PAGE_SIZE amount of data. This makes the behavior more consistent with
expectations, and should mitigate the impact of Jann's fix for the
age-old signal check bug.

---- test program ----

  #include <unistd.h>
  #include <signal.h>
  #include <stdio.h>
  #include <sys/random.h>

  static unsigned char x[~0U];

  static void handle(int) { }

  int main(int argc, char *argv[])
  {
    pid_t pid = getpid(), child;
    signal(SIGUSR1, handle);
    if (!(child = fork())) {
      for (;;)
        kill(pid, SIGUSR1);
    }
    pause();
    printf("interrupted after reading %zd bytes\n", getrandom(x, sizeof(x), 0));
    kill(child, SIGTERM);
    return 0;
  }

Cc: Jann Horn <jannh@google.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>

OF framebuffers do not have an underlying device in the Linux
device hierarchy. Do a regular unregister call instead of hot
unplugging such a non-existing device. Fixes a NULL dereference.
An example error message on ppc64le is shown below.

  BUG: Kernel NULL pointer dereference on read at 0x00000060
  Faulting instruction address: 0xc00000000080dfa4
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  [...]
  CPU: 2 PID: 139 Comm: systemd-udevd Not tainted 5.17.0-ae085d7f #1
  NIP:  c00000000080dfa4 LR: c00000000080df9c CTR: c000000000797430
  REGS: c000000004132fe0 TRAP: 0300   Not tainted  (5.17.0-ae085d7f)
  MSR:  8000000002009033 <SF,VEC,EE,ME,IR,DR,RI,LE>  CR: 28228282  XER: 20000000
  CFAR: c00000000000c80c DAR: 0000000000000060 DSISR: 40000000 IRQMASK: 0
  GPR00: c00000000080df9c c000000004133280 c00000000169d200 0000000000000029
  GPR04: 00000000ffffefff c000000004132f90 c000000004132f88 0000000000000000
  GPR08: c0000000015658f8 c0000000015cd200 c0000000014f57d0 0000000048228283
  GPR12: 0000000000000000 c00000003fffe300 0000000020000000 0000000000000000
  GPR16: 0000000000000000 0000000113fc4a40 0000000000000005 0000000113fcfb80
  GPR20: 000001000f7283b0 0000000000000000 c000000000e4a588 c000000000e4a5b0
  GPR24: 0000000000000001 00000000000a0000 c008000000db0168 c0000000021f6ec0
  GPR28: c0000000016d65a8 c000000004b36460 0000000000000000 c0000000016d64b0
  NIP [c00000000080dfa4] do_remove_conflicting_framebuffers+0x184/0x1d0
  [c000000004133280] [c00000000080df9c] do_remove_conflicting_framebuffers+0x17c/0x1d0 (unreliable)
  [c000000004133350] [c00000000080e4d0] remove_conflicting_framebuffers+0x60/0x150
  [c0000000041333a0] [c00000000080e6f4] remove_conflicting_pci_framebuffers+0x134/0x1b0
  [c000000004133450] [c008000000e70438] drm_aperture_remove_conflicting_pci_framebuffers+0x90/0x100 [drm]
  [c000000004133490] [c008000000da0ce4] bochs_pci_probe+0x6c/0xa64 [bochs]
  [...]
  [c000000004133db0] [c00000000002aaa0] system_call_exception+0x170/0x2d0
  [c000000004133e10] [c00000000000c3cc] system_call_common+0xec/0x250

The bug [1] was introduced by commit 27599aac ("fbdev: Hot-unplug
firmware fb devices on forced removal"). Most firmware framebuffers
have an underlying platform device, which can be hot-unplugged
before loading the native graphics driver. OF framebuffers do not
(yet) have that device. Fix the code by unregistering the framebuffer
as before without a hot unplug.

Tested with 5.17 on qemu ppc64le emulation.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 27599aac ("fbdev: Hot-unplug firmware fb devices on forced removal")
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Cc: Zack Rusin <zackr@vmware.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: stable@vger.kernel.org # v5.11+
Cc: Helge Deller <deller@gmx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Zheyu Ma <zheyuma97@gmail.com>
Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Link: https://lore.kernel.org/all/YkHXO6LGHAN0p1pq@debian/ # [1]
Link: https://patchwork.freedesktop.org/patch/msgid/20220404194402.29974-1-tzimmermann@suse.de

The previous commit fixed support for dual-stack sockets in
bpf_tcp_check_syncookie. This commit adjusts the selftest to verify the
fixed functionality.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Arthur Fabre <afabre@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220406124113.2795730-2-maximmi@nvidia.com

bpf_tcp_gen_syncookie looks at the IP version in the IP header and
validates the address family of the socket. It supports IPv4 packets in
AF_INET6 dual-stack sockets.

On the other hand, bpf_tcp_check_syncookie looks only at the address
family of the socket, ignoring the real IP version in headers, and
validates only the packet size. This implementation has some drawbacks:

1. Packets are not validated properly, allowing a BPF program to trick
   bpf_tcp_check_syncookie into handling an IPv6 packet on an IPv4
   socket.

2. Dual-stack sockets fail the checks on IPv4 packets. IPv4 clients end
   up receiving a SYNACK with the cookie, but the following ACK gets
   dropped.

This patch fixes these issues by changing the checks in
bpf_tcp_check_syncookie to match the ones in bpf_tcp_gen_syncookie. IP
version from the header is taken into account, and it is validated
properly with address family.

Fixes: 39904084 ("bpf: add helper to check for a valid SYN cookie")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Acked-by: Arthur Fabre <afabre@cloudflare.com>
Link: https://lore.kernel.org/bpf/20220406124113.2795730-1-maximmi@nvidia.com

SMU takes clock limits in Mhz units.  socclk and fclk were
using 10 khz units in some cases.  Switch to Mhz units.
Fixes higher than required SoC clocks.

Fixes: 97cf3299 ("drm/amd/pm: Removed fixed clock in auto mode DPM")
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why & How]
Make dcn315 base its clock table off dcfclk rather than fclk.

This change also adds some sanity checking to make sure an
empty pmfw table does not result in invalid dal clocks.
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Fixes crash on MST Hub disconnect.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849
Fixes: ee2698cf ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split")
Signed-off-by: Benjamin Marty <info@benjaminmarty.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
Work around to try to wake unresponsive DP sinks may need to be adjusted
for certain sinks.

[How]
Add options to disable work around or adjust time spent trying to wake
unresponsive DPRX.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Jimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove assert that will hit during odm transition case,
since this is a valid case.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Acked-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Eric Bernstein <eric.bernstein@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Seems to cause a reboots or hangs on some systems.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1924
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1953
Fixes: daf8de08 ("drm/amdgpu: always reset the asic in suspend (v2)")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
Below general protection fault observed when WebGL Aquarium is run for
longer duration. If drm debug logs are enabled and set to 0x1f then the
issue is observed within 10 minutes of run.

[  100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI
[  100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G        W         5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b
[  100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f
[  100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b
[  100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246
[  100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000
[  100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000
[  100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c
[  100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44
[  100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0
[  100.848159] FS:  00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000
[  100.856240] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0
[  100.869106] Call Trace:
[  100.871555]  <TASK>
[  100.873655]  ? asm_sysvec_reschedule_ipi+0x12/0x20
[  100.878449]  CalculateSwathAndDETConfiguration+0x1a3/0x6dd
[  100.883937]  dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da
[  100.890467]  ? kallsyms_lookup_buildid+0xc8/0x163
[  100.895173]  ? kallsyms_lookup_buildid+0xc8/0x163
[  100.899874]  ? __sprint_symbol+0x80/0x135
[  100.903883]  ? dm_update_plane_state+0x3f9/0x4d2
[  100.908500]  ? symbol_string+0xb7/0xde
[  100.912250]  ? number+0x145/0x29b
[  100.915566]  ? vsnprintf+0x341/0x5ff
[  100.919141]  ? desc_read_finalized_seq+0x39/0x87
[  100.923755]  ? update_load_avg+0x1b9/0x607
[  100.927849]  ? compute_mst_dsc_configs_for_state+0x7d/0xd5b
[  100.933416]  ? fetch_pipe_params+0xa4d/0xd0c
[  100.937686]  ? dc_fpu_end+0x3d/0xa8
[  100.941175]  dml_get_voltage_level+0x16b/0x180
[  100.945619]  dcn30_internal_validate_bw+0x10e/0x89b
[  100.950495]  ? dcn31_validate_bandwidth+0x68/0x1fc
[  100.955285]  ? resource_build_scaling_params+0x98b/0xb8c
[  100.960595]  ? dcn31_validate_bandwidth+0x68/0x1fc
[  100.965384]  dcn31_validate_bandwidth+0x9a/0x1fc
[  100.970001]  dc_validate_global_state+0x238/0x295
[  100.974703]  amdgpu_dm_atomic_check+0x9c1/0xbce
[  100.979235]  ? _printk+0x59/0x73
[  100.982467]  drm_atomic_check_only+0x403/0x78b
[  100.986912]  drm_mode_atomic_ioctl+0x49b/0x546
[  100.991358]  ? drm_ioctl+0x1c1/0x3b3
[  100.994936]  ? drm_atomic_set_property+0x92a/0x92a
[  100.999725]  drm_ioctl_kernel+0xdc/0x149
[  101.003648]  drm_ioctl+0x27f/0x3b3
[  101.007051]  ? drm_atomic_set_property+0x92a/0x92a
[  101.011842]  amdgpu_drm_ioctl+0x49/0x7d
[  101.015679]  __se_sys_ioctl+0x7c/0xb8
[  101.015685]  do_syscall_64+0x5f/0xb8
[  101.015690]  ? __irq_exit_rcu+0x34/0x96

[How]
It calles populate_dml_pipes which uses doubles to initialize.
Adding FPU protection avoids context switch and probable loss of vba context
as there is potential contention while drm debug logs are enabled.
Signed-off-by: CHANDAN VURDIGERE NATARAJ <chandan.vurdigerenataraj@amd.com>
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This ensures userspace cannot prematurely clean-up the client before
it is fully initialised which has been proven to cause issues in the
past.

Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Sync up header and implementation to use the same parameter names
in function amdgpu_ring_init.
ring_size -> max_dw, prio -> hw_prio
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Ma Jun <Jun.Ma2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gfx10.3.3/gfx10.3.6/gfx10.3.7 shall use 0x1580 address for GCR_GENERAL_CNTL
Acked-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Aaron Liu <aaron.liu@amd.com>
Signed-off-by: Ruili Ji <ruiliji2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
comparing pwm bl values (coverted) with user brightness(converted)
levels in commit_tail leads to continuous setting of backlight via dmub
as they don't to match.
This leads overdrive in queuing of commands to DMCU that sometimes lead
to depending on load on DMCU fw:

"[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3"

[How]
Store last successfully set backlight value and compare with it instead
of pwm reads which is not what we should compare with.
Signed-off-by: Shirish S <shirish.s@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org