- 20 Feb, 2014 8 commits
-
-
Will Deacon authored
commit 40507403 upstream. Whilst the text segment for our VDSO is marked as PT_LOAD in the ELF headers, it is mapped by the kernel and not actually subject to demand-paging. ld doesn't realise this, and emits a p_align field of 64k (the maximum supported page size), which conflicts with the load address picked by the kernel on 4k systems, which will be 4k aligned. This causes GDB to fail with "Failed to read a valid object file image from memory" when attempting to load the VDSO. This patch passes the -n option to ld, which prevents it from aligning PT_LOAD segments to the maximum page size. Reported-by:
Kyle McMartin <kyle@redhat.com> Acked-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nathan Lynch authored
commit d4022a33 upstream. Update wall-to-monotonic fields in the VDSO data page unconditionally. These are used to service CLOCK_MONOTONIC_COARSE, which is not guarded by use_syscall. Signed-off-by:
Nathan Lynch <nathan_lynch@mentor.com> Acked-by:
-
Lior Amsalem authored
commit a6f089e9 upstream. In the Armada 370/XP driver, when we receive an IRQ 0, we read the list of doorbells that caused the interrupt from register ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS. This gives the list of IPIs that were generated. However, instead of acknowledging only the IPIs that were generated, we acknowledge *all* the IPIs, by writing ~IPI_DOORBELL_MASK in the ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register. This creates a race condition: if a new IPI that isn't part of the ones read into the temporary "ipimask" variable is fired before we acknowledge all IPIs, then we will simply loose it. This is causing scheduling hangs on SMP intensive workloads. It is important to mention that this ARMADA_370_XP_IN_DRBEL_CAUSE_OFFS register has the following behavior: "A CPU write of 0 clears the bits in this field. A CPU write of 1 has no effect". This is what allows us to simply write ~ipimask to acknoledge the handled IPIs. Notice that the same problem is present in the MSI implementation, but it will be fixed as a separate patch, so that this IPI fix can be pushed to older stable versions as appropriate (all the way to 3.8), while the MSI code only appeared in 3.13. Signed-off-by:
Lior Amsalem <alior@marvell.com> Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Fixes: 344e873e 'arm: mvebu: Add IPI support via doorbells' Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Harald Freudenberger authored
commit ee97dc7d upstream. In s390 des and 3des ctr mode there is one preallocated page used to speed up the en/decryption. This page is not protected against concurrent usage and thus there is a potential of data corruption with multiple threads. The fix introduces locking/unlocking the ctr page and a slower fallback solution at concurrency situations. Signed-off-by:
Harald Freudenberger <freude@linux.vnet.ibm.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Harald Freudenberger authored
commit adc3fcf1 upstream. In s390 des and des3_ede cbc mode the iv value is not protected against concurrency access and modifications from another running en/decrypt operation which is using the very same tfm struct instance. This fix copies the iv to the local stack before the crypto operation and stores the value back when done. Signed-off-by:
-
Harald Freudenberger authored
commit 0519e9ad upstream. The aes-ctr mode uses one preallocated page without any concurrency protection. When multiple threads run aes-ctr encryption or decryption this can lead to data corruption. The patch introduces locking for the page and a fallback solution with slower en/decryption performance in concurrency situations. Signed-off-by:
-
Josef Bacik authored
commit 8101c8db upstream. It's just broken and it's taking a lot of effort to fix it, so for now just disable it so people can defrag in peace. Thanks, Signed-off-by:
Josef Bacik <jbacik@fb.com> Signed-off-by:
Chris Mason <clm@fb.com> Signed-off-by:
-
Stephen Smalley authored
commit 2172fa70 upstream. Setting an empty security context (length=0) on a file will lead to incorrectly dereferencing the type and other fields of the security context structure, yielding a kernel BUG. As a zero-length security context is never valid, just reject all such security contexts whether coming from userspace via setxattr or coming from the filesystem upon a getxattr request by SELinux. Setting a security context value (empty or otherwise) unknown to SELinux in the first place is only possible for a root process (CAP_MAC_ADMIN), and, if running SELinux in enforcing mode, only if the corresponding SELinux mac_admin permission is also granted to the domain by policy. In Fedora policies, this is only allowed for specific domains such as livecd for setting down security contexts that are not defined in the build host policy. Reproducer: su setenforce 0 touch foo setfattr -n security.selinux foo Caveat: Relabeling or removing foo after doing the above may not be possible without booting with SELinux disabled. Any subsequent access to foo after doing the above will also trigger the BUG. BUG output from Matthew Thode: [ 473.893141] ------------[ cut here ]------------ [ 473.962110] kernel BUG at security/selinux/ss/services.c:654! [ 473.995314] invalid opcode: 0000 [#6] SMP [ 474.027196] Modules linked in: [ 474.058118] CPU: 0 PID: 8138 Comm: ls Tainted: G D I 3.13.0-grsec #1 [ 474.116637] Hardware name: Supermicro X8ST3/X8ST3, BIOS 2.0 07/29/10 [ 474.149768] task: ffff8805f50cd010 ti: ffff8805f50cd488 task.ti: ffff8805f50cd488 [ 474.183707] RIP: 0010:[<ffffffff814681c7>] [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 474.219954] RSP: 0018:ffff8805c0ac3c38 EFLAGS: 00010246 [ 474.252253] RAX: 0000000000000000 RBX: ffff8805c0ac3d94 RCX: 0000000000000100 [ 474.287018] RDX: ffff8805e8aac000 RSI: 00000000ffffffff RDI: ffff8805e8aaa000 [ 474.321199] RBP: ffff8805c0ac3cb8 R08: 0000000000000010 R09: 0000000000000006 [ 474.357446] R10: 0000000000000000 R11: ffff8805c567a000 R12: 0000000000000006 [ 474.419191] R13: ffff8805c2b74e88 R14: 00000000000001da R15: 0000000000000000 [ 474.453816] FS: 00007f2e75220800(0000) GS:ffff88061fc00000(0000) knlGS:0000000000000000 [ 474.489254] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 474.522215] CR2: 00007f2e74716090 CR3: 00000005c085e000 CR4: 00000000000207f0 [ 474.556058] Stack: [ 474.584325] ffff8805c0ac3c98 ffffffff811b549b ffff8805c0ac3c98 ffff8805f1190a40 [ 474.618913] ffff8805a6202f08 ffff8805c2b74e88 00068800d0464990 ffff8805e8aac860 [ 474.653955] ffff8805c0ac3cb8 000700068113833a ffff880606c75060 ffff8805c0ac3d94 [ 474.690461] Call Trace: [ 474.723779] [<ffffffff811b549b>] ? lookup_fast+0x1cd/0x22a [ 474.778049] [<ffffffff81468824>] security_compute_av+0xf4/0x20b [ 474.811398] [<ffffffff8196f419>] avc_compute_av+0x2a/0x179 [ 474.843813] [<ffffffff8145727b>] avc_has_perm+0x45/0xf4 [ 474.875694] [<ffffffff81457d0e>] inode_has_perm+0x2a/0x31 [ 474.907370] [<ffffffff81457e76>] selinux_inode_getattr+0x3c/0x3e [ 474.938726] [<ffffffff81455cf6>] security_inode_getattr+0x1b/0x22 [ 474.970036] [<ffffffff811b057d>] vfs_getattr+0x19/0x2d [ 475.000618] [<ffffffff811b05e5>] vfs_fstatat+0x54/0x91 [ 475.030402] [<ffffffff811b063b>] vfs_lstat+0x19/0x1b [ 475.061097] [<ffffffff811b077e>] SyS_newlstat+0x15/0x30 [ 475.094595] [<ffffffff8113c5c1>] ? __audit_syscall_entry+0xa1/0xc3 [ 475.148405] [<ffffffff8197791e>] system_call_fastpath+0x16/0x1b [ 475.179201] Code: 00 48 85 c0 48 89 45 b8 75 02 0f 0b 48 8b 45 a0 48 8b 3d 45 d0 b6 00 8b 40 08 89 c6 ff ce e8 d1 b0 06 00 48 85 c0 49 89 c7 75 02 <0f> 0b 48 8b 45 b8 4c 8b 28 eb 1e 49 8d 7d 08 be 80 01 00 00 e8 [ 475.255884] RIP [<ffffffff814681c7>] context_struct_compute_av+0xce/0x308 [ 475.296120] RSP <ffff8805c0ac3c38> [ 475.328734] ---[ end trace f076482e9d754adc ]--- Reported-by:
Matthew Thode <mthode@mthode.org> Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Signed-off-by:
Paul Moore <pmoore@redhat.com> Signed-off-by:
-
- 13 Feb, 2014 32 commits
-
-
Greg Kroah-Hartman authored
-
Dirk Brandewie authored
commit 7244cb62 upstream. The minimum pstate is supposed to be a percentage of the maximum P state available. Calculate min using max pstate and not the current max which may have been limited by the user Signed-off-by:
Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Brennan Shacklett authored
commit d253d2a5 upstream. This patch addresses Bug 60727 (https://bugzilla.kernel.org/show_bug.cgi?id=60727) which was due to the truncation of intermediate values in the calculations, which causes the code to consistently underestimate the current cpu frequency, specifically 100% cpu utilization was truncated down to the setpoint of 97%. This patch fixes the problem by keeping the results of all intermediate calculations as fixed point numbers rather scaling them back and forth between integers and fixed point. References: https://bugzilla.kernel.org/show_bug.cgi?id=60727Signed-off-by:
Brennan Shacklett <bpshacklett@gmail.com> Acked-by:
-
Srinivas Pandruvada authored
commit 1ccf7a1c upstream. When sysfs for no_turbo is set, then also some p states in turbo regions are observed. This patch will set IDA Engage bit when no_turbo is set to explicitly disengage turbo. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by:
-
Nell Hardcastle authored
commit 6cdcdb79 upstream. Enable the intel_pstate driver for Haswell CPUs. One missing Ivy Bridge model (0x3E) is also included. Models referenced from tools/power/x86/turbostat/turbostat.c:has_nehalem_turbo_ratio_limit Signed-off-by:
Nell Hardcastle <nell@spicious.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Acked-by:
-
John Stultz authored
commit 6fdda9a9 upstream. As part of normal operaions, the hrtimer subsystem frequently calls into the timekeeping code, creating a locking order of hrtimer locks -> timekeeping locks clock_was_set_delayed() was suppoed to allow us to avoid deadlocks between the timekeeping the hrtimer subsystem, so that we could notify the hrtimer subsytem the time had changed while holding the timekeeping locks. This was done by scheduling delayed work that would run later once we were out of the timekeeing code. But unfortunately the lock chains are complex enoguh that in scheduling delayed work, we end up eventually trying to grab an hrtimer lock. Sasha Levin noticed this in testing when the new seqlock lockdep enablement triggered the following (somewhat abrieviated) message: [ 251.100221] ====================================================== [ 251.100221] [ INFO: possible circular locking dependency detected ] [ 251.100221] 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 Not tainted [ 251.101967] ------------------------------------------------------- [ 251.101967] kworker/10:1/4506 is trying to acquire lock: [ 251.101967] (timekeeper_seq){----..}, at: [<ffffffff81160e96>] retrigger_next_event+0x56/0x70 [ 251.101967] [ 251.101967] but task is already holding lock: [ 251.101967] (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] which lock already depends on the new lock. [ 251.101967] [ 251.101967] [ 251.101967] the existing dependency chain (in reverse order) is: [ 251.101967] -> #5 (hrtimer_bases.lock#11){-.-...}: [snipped] -> #4 (&rt_b->rt_runtime_lock){-.-...}: [snipped] -> #3 (&rq->lock){-.-.-.}: [snipped] -> #2 (&p->pi_lock){-.-.-.}: [snipped] -> #1 (&(&pool->lock)->rlock){-.-...}: [ 251.101967] [<ffffffff81194803>] validate_chain+0x6c3/0x7b0 [ 251.101967] [<ffffffff81194d9d>] __lock_acquire+0x4ad/0x580 [ 251.101967] [<ffffffff81194ff2>] lock_acquire+0x182/0x1d0 [ 251.101967] [<ffffffff84398500>] _raw_spin_lock+0x40/0x80 [ 251.101967] [<ffffffff81153e69>] __queue_work+0x1a9/0x3f0 [ 251.101967] [<ffffffff81154168>] queue_work_on+0x98/0x120 [ 251.101967] [<ffffffff81161351>] clock_was_set_delayed+0x21/0x30 [ 251.101967] [<ffffffff811c4bd1>] do_adjtimex+0x111/0x160 [ 251.101967] [<ffffffff811e2711>] compat_sys_adjtimex+0x41/0x70 [ 251.101967] [<ffffffff843a4b49>] ia32_sysret+0x0/0x5 [ 251.101967] -> #0 (timekeeper_seq){----..}: [snipped] [ 251.101967] other info that might help us debug this: [ 251.101967] [ 251.101967] Chain exists of: timekeeper_seq --> &rt_b->rt_runtime_lock --> hrtimer_bases.lock#11 [ 251.101967] Possible unsafe locking scenario: [ 251.101967] [ 251.101967] CPU0 CPU1 [ 251.101967] ---- ---- [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(&rt_b->rt_runtime_lock); [ 251.101967] lock(hrtimer_bases.lock#11); [ 251.101967] lock(timekeeper_seq); [ 251.101967] [ 251.101967] *** DEADLOCK *** [ 251.101967] [ 251.101967] 3 locks held by kworker/10:1/4506: [ 251.101967] #0: (events){.+.+.+}, at: [<ffffffff81154960>] process_one_work+0x200/0x530 [ 251.101967] #1: (hrtimer_work){+.+...}, at: [<ffffffff81154960>] process_one_work+0x200/0x530 [ 251.101967] #2: (hrtimer_bases.lock#11){-.-...}, at: [<ffffffff81160e7c>] retrigger_next_event+0x3c/0x70 [ 251.101967] [ 251.101967] stack backtrace: [ 251.101967] CPU: 10 PID: 4506 Comm: kworker/10:1 Not tainted 3.13.0-rc2-next-20131206-sasha-00005-g8be2375-dirty #4053 [ 251.101967] Workqueue: events clock_was_set_work So the best solution is to avoid calling clock_was_set_delayed() while holding the timekeeping lock, and instead using a flag variable to decide if we should call clock_was_set() once we've released the locks. This works for the case here, where the do_adjtimex() was the deadlock trigger point. Unfortuantely, in update_wall_time() we still hold the jiffies lock, which would deadlock with the ipi triggered by clock_was_set(), preventing us from calling it even after we drop the timekeeping lock. So instead call clock_was_set_delayed() at that point. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Sasha Levin <sasha.levin@oracle.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Tested-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Borislav Petkov authored
commit d5a1c7e3 upstream. 41c7f742 ("rtc: Disable the alarm in the hardware (v2)") added the functionality to disable the RTC wake alarm when shutting down the box. However, there are at least two b0rked BIOSes we know about: https://bugzilla.novell.com/show_bug.cgi?id=812592 https://bugzilla.novell.com/show_bug.cgi?id=805740 where, when wakeup alarm is enabled in the BIOS, the machine reboots automatically right after shutdown, regardless of what wakeup time is programmed. Bisecting the issue lead to this patch so disable its functionality with a DMI quirk only for those boxes. Cc: Brecht Machiels <brecht@mos6581.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> Cc: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by:
Borislav Petkov <bp@suse.de> [jstultz: Changed variable name for clarity, added extra dmi entry] Tested-by:
Brecht Machiels <brecht@mos6581.org> Tested-by:
-
John Stultz authored
commit 330a1617 upstream. Since 48cdc135 (Implement a shadow timekeeper), we have to call timekeeping_update() after any adjustment to the timekeeping structure in order to make sure that any adjustments to the structure persist. In the timekeeping suspend path, we udpate the timekeeper structure, so we should be sure to update the shadow-timekeeper before releasing the timekeeping locks. Currently this isn't done. In most cases, the next time related code to run would be timekeeping_resume, which does update the shadow-timekeeper, but in an abundence of caution, this patch adds the call to timekeeping_update() in the suspend path. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
John Stultz authored
commit 04005f60 upstream. A think-o in the calculation of the monotonic -> tai time offset results in CLOCK_TAI timers and nanosleeps to expire late (the latency is ~2x the tai offset). Fix this by adding the tai offset from the realtime offset instead of subtracting. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
John Stultz authored
commit f55c0760 upstream. Since 48cdc135 (Implement a shadow timekeeper), we have to call timekeeping_update() after any adjustment to the timekeeping structure in order to make sure that any adjustments to the structure persist. Unfortunately, the updates to the tai offset via adjtimex do not trigger this update, causing adjustments to the tai offset to be made and then over-written by the previous value at the next update_wall_time() call. This patch resovles the issue by calling timekeeping_update() right after setting the tai offset. Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Steven Rostedt authored
commit 23a8e844 upstream. Doing some different tests, I discovered that function graph tracing, when filtered via the set_ftrace_filter and set_ftrace_notrace files, does not always keep with them if another function ftrace_ops is registered to trace functions. The reason is that function graph just happens to trace all functions that the function tracer enables. When there was only one user of function tracing, the function graph tracer did not need to worry about being called by functions that it did not want to trace. But now that there are other users, this becomes a problem. For example, one just needs to do the following: # cd /sys/kernel/debug/tracing # echo schedule > set_ftrace_filter # echo function_graph > current_tracer # cat trace [..] 0) | schedule() { ------------------------------------------ 0) <idle>-0 => rcu_pre-7 ------------------------------------------ 0) ! 2980.314 us | } 0) | schedule() { ------------------------------------------ 0) rcu_pre-7 => <idle>-0 ------------------------------------------ 0) + 20.701 us | } # echo 1 > /proc/sys/kernel/stack_tracer_enabled # cat trace [..] 1) + 20.825 us | } 1) + 21.651 us | } 1) + 30.924 us | } /* SyS_ioctl */ 1) | do_page_fault() { 1) | __do_page_fault() { 1) 0.274 us | down_read_trylock(); 1) 0.098 us | find_vma(); 1) | handle_mm_fault() { 1) | _raw_spin_lock() { 1) 0.102 us | preempt_count_add(); 1) 0.097 us | do_raw_spin_lock(); 1) 2.173 us | } 1) | do_wp_page() { 1) 0.079 us | vm_normal_page(); 1) 0.086 us | reuse_swap_page(); 1) 0.076 us | page_move_anon_rmap(); 1) | unlock_page() { 1) 0.082 us | page_waitqueue(); 1) 0.086 us | __wake_up_bit(); 1) 1.801 us | } 1) 0.075 us | ptep_set_access_flags(); 1) | _raw_spin_unlock() { 1) 0.098 us | do_raw_spin_unlock(); 1) 0.105 us | preempt_count_sub(); 1) 1.884 us | } 1) 9.149 us | } 1) + 13.083 us | } 1) 0.146 us | up_read(); When the stack tracer was enabled, it enabled all functions to be traced, which now the function graph tracer also traces. This is a side effect that should not occur. To fix this a test is added when the function tracing is changed, as well as when the graph tracer is enabled, to see if anything other than the ftrace global_ops function tracer is enabled. If so, then the graph tracer calls a test trampoline that will look at the function that is being traced and compare it with the filters defined by the global_ops. As an optimization, if there's no other function tracers registered, or if the only registered function tracers also use the global ops, the function graph infrastructure will call the registered function graph callback directly and not go through the test trampoline. Fixes: d2d45c7a "tracing: Have stack_tracer use a separate list of functions" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt authored
commit a4c35ed2 upstream. The synchronization needed after ftrace_ops are unregistered must happen after the callback is disabled from becing called by functions. The current location happens after the function is being removed from the internal lists, but not after the function callbacks were disabled, leaving the functions susceptible of being called after their callbacks are freed. This affects perf and any externel users of function tracing (LTTng and SystemTap). Fixes: cdbe61bf "ftrace: Allow dynamically allocated function tracers" Signed-off-by:
-
Steven Rostedt authored
commit 405e1d83 upstream. ftrace_trace_function is a variable that holds what function will be called directly by the assembly code (mcount). If just a single function is registered and it handles recursion itself, then the assembly will call that function directly without any helper function. It also passes in the ftrace_op that was registered with the callback. The ftrace_op to send is stored in the function_trace_op variable. The ftrace_trace_function and function_trace_op needs to be coordinated such that the called callback wont be called with the wrong ftrace_op, otherwise bad things can happen if it expected a different op. Luckily, there's no callback that doesn't use the helper functions that requires this. But there soon will be and this needs to be fixed. Use a set_function_trace_op to store the ftrace_op to set the function_trace_op to when it is safe to do so (during the update function within the breakpoint or stop machine calls). Or if dynamic ftrace is not being used (static tracing) then we have to do a bit more synchronization when the ftrace_trace_function is set as that takes affect immediately (as oppose to dynamic ftrace doing it with the modification of the trampoline). Signed-off-by:
-
Seth Heasley authored
commit f39901c1 upstream. This patch adds the i801 SMBus Controller DeviceIDs for the Intel Coleto Creek PCH. Signed-off-by:
Seth Heasley <seth.heasley@intel.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Cc: "Chan, Wei Sern" <wei.sern.chan@intel.com> Signed-off-by:
-
Seth Heasley authored
commit 283aae8a upstream. This patch adds the LPC Controller DeviceIDs for iTCO Watchdog for the Intel Coleto Creek PCH. Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com> Cc: "Chan, Wei Sern" <wei.sern.chan@intel.com> Signed-off-by:
-
James Ralston authored
commit 8477128f upstream. This patch adds the LPC Controller Device IDs for Watchdog and GPIO for Intel Avoton SoC, to the lpc_ich driver. Signed-off-by:
James Ralston <james.d.ralston@intel.com> Signed-off-by:
-
Dave Airlie authored
commit ec22b4aa upstream. mode->mdev otherwise the bw limits never kick in. Reported in RHEL testing. Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Takashi Iwai authored
commit 2510538f upstream. When the mode is set with 16bpp on QEMU, the output gets totally broken. The culprit is the bogus register values set for 16bpp, which was likely copied from from a wrong place. Addresses https://bugzilla.novell.com/show_bug.cgi?id=799216Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Jiri Slaby <jslaby@suse.cz> Cc: David Airlie <airlied@linux.ie> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Stanislaw Gruszka authored
commit 22accca0 upstream. Not removing pm qos request and free memory for it can cause crash, when some other driver use pm qos. For example, this oops: BUG: unable to handle kernel paging request at fffffffffffffff8 IP: [<ffffffff81307a6b>] plist_add+0x5b/0xd0 Call Trace: [<ffffffff810acf25>] pm_qos_update_target+0x125/0x1e0 [<ffffffff810ad071>] pm_qos_add_request+0x91/0x100 [<ffffffffa053ec14>] e1000_open+0xe4/0x5b0 [e1000e] was caused by earlier i915 probe failure: [drm:i915_report_and_clear_eir] *ERROR* EIR stuck: 0x00000010, masking [drm:init_ring_common] *ERROR* render ring initialization failed ctl 0001f001 head 00003004 tail 00000000 start 00003000 [drm:i915_driver_load] *ERROR* failed to init modeset i915: probe of 0000:00:02.0 failed with error -5 Bug report: http://bugzilla.redhat.com/show_bug.cgi?id=1057533Reported-by:
Giandomenico De Tullio <ghisha@gmail.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> [danvet: Drop unnecessary code movement.] Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Todd Previte authored
commit 232a6ee9 upstream. Add new definitions for hotplug live status bits for VLV2 since they're in reverse order from the gen4x ones. Changelog: - Restored gen4 bit definitions - Added new definitions for VLV2 - Added platform check for IS_VALLEYVIEW() in dp_detect to use the correct bit defintions - Replaced a lost trailing brace for the added switch() Signed-off-by:
Todd Previte <tprevite@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73951 [danvet: Switch to _VLV postfix instead of prefix and regroupg comments again so that the g4x warning is right next to those defines. Also add a _G4X suffix for those special ones. Also cc stable.] Signed-off-by:
-
Akash Goel authored
commit ec14ba47 upstream. The 'offset' field of the 'scatterlist' structure was wrongly programmed with the offset value from the base of stolen area, whereas this field indicates the offset from where the interested data starts within the first PAGE pointed to by 'scattterlist' structure. As a result when a new GEM object allocated from stolen area is mapped to GTT, it could lead to an overwrite of GTT entries as the page count calculation will go wrong, refer the function 'sg_page_count'. v2: Modified the commit message. (Chris) Signed-off-by:
Akash Goel <akash.goel@intel.com> Reviewed-by:
Jesse Barnes <jbarnes@virtuousgeek.org> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71908 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=69104Signed-off-by:
-
Chris Wilson authored
commit 304d695c upstream. In very rare cases (such as a memory failure stress test) it is possible to fill the entire ring without emitting a request. Under this circumstance, the outstanding request is flushed and waited upon. After space on the ring is cleared, we return to emitting the new command - except that we just cleared the seqno allocated for this operation and trigger the sanity check that a request is only ever emitted with a valid seqno. The fix is to rearrange the code to make sure the allocation of the seqno for this operation is after any required flushes of outstanding operations. The bug exists since the preallocation was introduced in commit 9d773091 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Nov 27 16:22:52 2012 +0000 drm/i915: Preallocate next seqno before touching the ring Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Maarten Lankhorst authored
commit ce8f7699 upstream. Commit de7b7d59 introduced tiled GART, but a linear copy is still performed. This may result in errors on eviction, fix it by checking tiling from memtype. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 2995fa78 upstream. This reverts commit be35f486 ("dm: wait until embedded kobject is released before destroying a device") and provides an improved fix. The kobject release code that calls the completion must be placed in a non-module file, otherwise there is a module unload race (if the process calling dm_kobject_release is preempted and the DM module unloaded after the completion is triggered, but before dm_kobject_release returns). To fix this race, this patch moves the completion code to dm-builtin.c which is always compiled directly into the kernel if BLK_DEV_DM is selected. The patch introduces a new dm_kobject_holder structure, its purpose is to keep the completion and kobject in one place, so that it can be accessed from non-module code without the need to export the layout of struct mapped_device to that code. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Alex Deucher authored
commit 6802d4ba upstream. The BlankCrtc table in some DCE8 boards has some logic shortcuts for the vbios when this bit is set. Clear it for driver use. v2: fix typo Bug: https://bugs.freedesktop.org/show_bug.cgi?id=73420Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Alex Deucher authored
commit e9a321c6 upstream. DCE5 and newer hardware only has 1 DAC. Use the correct offset. This may fix display problems on certain board configurations. Signed-off-by:
-
Alex Deucher authored
commit d45b964a upstream. Needed to properly flush the read caches for fences. Signed-off-by:
-
Alex Deucher authored
commit 10e9ffae upstream. We need to set the engine bit to select the ME and also set the full cache bit. Should help stability on TN and cayman. V2: fix up surface sync in ib execute as well Signed-off-by:
-
Alex Deucher authored
commit d8e24525 upstream. Seems to cause problems with certain DP monitors. Bug: https://bugs.freedesktop.org/show_bug.cgi?id=40699Signed-off-by:
-
Marek Olšák authored
commit 56492e0f upstream. This fixes a bug which was causing rejections of valid GPU commands from userspace. Signed-off-by:
Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
Malcolm Priestley authored
commit dd4491df upstream. Current setting of symbol rate is not very actuate causing loss of lock. Covert temp to u64 and use mclk to calculate from big number. Calculate symbol rate by dividing symbol rate by 1000 times 1 << 24 and dividing sum by mclk. Add other symbol rate settings to function registers 0xa0-0xa3. In set_frontend add changes to register 0xf1 this must be done prior call to fe_reset. Register 0x00 doesn't need a second write of 0x1 Applied after patch m88rs2000: add m88rs2000_set_carrieroffset Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Malcolm Priestley authored
commit 06af15d1 upstream. Set the carrier offset correctly using the default mclk values. Add function m88rs2000_get_mclk to calculate the mclk value against crystal frequency which will later be used for other functions. Add function m88rs2000_set_carrieroffset to calculate and set the offset value. variable offset becomes a signed value. Register 0x86 is set the appropriate value according to remainder value of frequency % 192857 calculation as shown. Signed-off-by:
-
