- 03 Dec, 2023 26 commits
-
-
Jianhua Lu authored
Add type-c node to feature otg function and set usb-role-switch property for usb_1_dwc3 to enable usb otg. Reviewed-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Jianhua Lu <lujianhua000@gmail.com> Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Link: https://lore.kernel.org/r/20231126022849.14273-2-lujianhua000@gmail.comSigned-off-by:
Bjorn Andersson <andersson@kernel.org>
-
Jianhua Lu authored
There are two typos in this dtsi, so fix it. classis -> chassis. 80700000 -> 80600000 Reviewed-by:
-
André Apitzsch authored
Consider an object near to the sensor when their distance is about 4 cm or below. Reviewed-by:
André Apitzsch <git@apitzsch.eu> Link: https://lore.kernel.org/r/20231126-bqm5_prox-v2-1-b7defc3979ac@apitzsch.euSigned-off-by:
-
Konrad Dybcio authored
Enable the QCA bluetooth on RB2. It identifies like the following: Bluetooth: hci0: QCA Product ID :0x0000000a Bluetooth: hci0: QCA SOC Version :0x40020150 Bluetooth: hci0: QCA ROM Version :0x00000201 Bluetooth: hci0: QCA Patch Version:0x00000001 Bluetooth: hci0: QCA controller version 0x01500201 Signed-off-by:
-
Konrad Dybcio authored
Hook up UART3, usually used for communicating with a Bluetooth module. Signed-off-by:
-
Luca Weiss authored
Configure and enable the WCNSS which provides WiFi and Bluetooth on this device using the WCN3680B chip. Signed-off-by:
Luca Weiss <luca@z3ntu.xyz> Link: https://lore.kernel.org/r/20231127-fp3-wcnss-v2-1-a5154fae4768@z3ntu.xyzSigned-off-by:
-
Stephen Boyd authored
This link got broken by commit e790a4ce ("arm: docs: Move Arm documentation to Documentation/arch/") when the doc moved from arm/ to arch/arm/. Fix the link so that it can continue to be followed. Fixes: e790a4ce ("arm: docs: Move Arm documentation to Documentation/arch/") Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com> Cc: Yanteng Si <siyanteng@loongson.cn> Cc: Jonathan Corbet <corbet@lwn.net> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20231129030443.2753833-1-swboyd@chromium.orgSigned-off-by:
-
Komal Bajaj authored
Add DTS for Qualcomm qcs6490-rb3gen2 board which uses QCS6490 SoC. This adds debug uart and usb support along with regulators found on this board. Co-developed-by:
Naina Mehta <quic_nainmeht@quicinc.com> Signed-off-by:
Komal Bajaj <quic_kbajaj@quicinc.com> Reviewed-by:
Caleb Connolly <caleb.connolly@linaro.org> Link: https://lore.kernel.org/r/20231129065816.26409-4-quic_kbajaj@quicinc.comSigned-off-by:
-
Komal Bajaj authored
Add DTS for Qualcomm IDP platform using QCM6490 SoC. This adds debug uart, eMMC and usb support along with regulators found on this board. Signed-off-by:
-
Komal Bajaj authored
Document the qcom,qcm6490-idp and qcs6490-rb3gen2 boards. qcm6490-idp based off qcm6490 SoC derived from sc7280 meant for various form factor including IoT and qcs6490-rb3gen2 based off qcs6490 SoC derivative of qcm6490 without internal modem. Co-developed by: Naina Mehta <quic_nainmeht@quicinc.com> Signed-off by: Naina Mehta <quic_nainmeht@quicinc.com> Signed-off-by:
-
Tengfei Fan authored
Some gpios are reserved for other subsystems, so mark these reserved gpios. Suggested-by:
Can Guo <quic_cang@quicinc.com> Signed-off-by:
Tengfei Fan <quic_tengfan@quicinc.com> Reviewed-by:
-
Tengfei Fan authored
Add uart support for QRD4450 for enable uart console. Reviewed-by:
-
Tengfei Fan authored
Add base description of UART and TLMM nodes which helps SM4450 boot to shell with console on boards with this SoC. Reviewed-by:
-
Tengfei Fan authored
Add device node for RPMH and Global clock controller on Qualcomm SM4450 platform. Reviewed-by:
Ajit Pandey <quic_ajipan@quicinc.com> Signed-off-by:
-
Ajit Pandey authored
Add apps_rsc node and cmd_db memory region for sm4450. Reviewed-by:
-
Robert Marko authored
Pass QMP PCI PHY PIPE clocks to the GCC controller so it does not have to find them by matching globaly by name. If not passed directly, driver maintains backwards compatibility by then falling back to global lookup. Signed-off-by:
Robert Marko <robimarko@gmail.com> Reviewed-by:
Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20231013164025.3541606-2-robimarko@gmail.comSigned-off-by:
-
Robert Marko authored
QMP PCI PHY PIPE clocks are inputs for the GCC clock controller. In order to describe this in DTS, allow passing them as the inputs to GCC. This has a benefit that it avoids doing a global matching by name. Signed-off-by:
-
Gianluca Boiano authored
This change add spi_3, spi_5 and spi_6 interfaces to MSM8953 devices. Signed-off-by:
Gianluca Boiano <morf3089@gmail.com> Acked-by:
-
Luca Weiss authored
Configure the thermals for the QUIET_THERM, CAM_FLASH_THERM, MSM_THERM and RFC_CAM_THERM thermistors connected to PM7325. With this PMIC the software communication to the ADC is going through PMK7325 (= PMK8350). Signed-off-by:
Luca Weiss <luca.weiss@fairphone.com> Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-4-f14df01922e6@fairphone.comSigned-off-by:
-
Luca Weiss authored
Configure the thermals for the XO_THERM line connected to PMK7325 (named in software PMK8350). Signed-off-by:
-
Luca Weiss authored
Configure the thermals for the CHARGER_SKIN_THERM and USB_CONN_THERM thermistors connected to PM7250B. Signed-off-by:
-
Luca Weiss authored
Add the defines for the ADC channels found on the PM7325. The list is taken from downstream msm-5.4 and adjusted for mainline. Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-1-f14df01922e6@fairphone.comSigned-off-by:
-
Manivannan Sadhasivam authored
UFS host controller, when scaling gears, should choose appropriate performance state of RPMh power domain controller along with clock frequency. So let's add the OPP table support to specify both clock frequency and RPMh performance states replacing the old "freq-table-hz" property. Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20231012172129.65172-6-manivannan.sadhasivam@linaro.orgSigned-off-by:
-
Krzysztof Kozlowski authored
UFS host controller, when scaling gears, should choose appropriate performance state of RPMh power domain controller along with clock frequency. So let's add the OPP table support to specify both clock frequency and RPMh performance states replacing the old "freq-table-hz" property. Reviewed-by:
-
Sridharan S N authored
IPQ bootloaders do not need these information to select the the DTB blob. So dropping the board names from board section. Signed-off-by:
Sridharan S N <quic_sridsn@quicinc.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20230927093130.4098385-1-quic_sridsn@quicinc.comSigned-off-by:
-
Gokul Sriram Palanisamy authored
Add the APCS, A53 PLL, cpu-opp-table nodes to set the CPU frequency at 800MHz (idle) or 1.008GHz. Co-developed-by:
Sricharan Ramabadhran <quic_srichara@quicinc.com> Signed-off-by:
Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com> Reviewed-by:
-
- 14 Nov, 2023 9 commits
-
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Dmitry Baryshkov authored
Change the USB QMP PHY to use newer style of QMP PHY bindings (single resource region, no per-PHY subnodes). Signed-off-by:
-
Bjorn Andersson authored
This merges leftover patches originally targetted for 6.7, but wasn't propagated in time. This describes the USB components on IPQ5018, and one of the SPI controllers. The IPQ9574 RDP descriptions are refactored to keep common dtsi, and the WPS button is described. GPLL0 is described as a source clock for the mailbox (APCS clock) across IPQ5332, IPQ6018, IPQ8074, and IPQ9574. On MSM8916, the asynchronous packet router (APR) is described on the DSP remoteproc, and audio services are described. Audio and modem are then enabled on a range of MSM8916- and MSM8939-based devices. GPU support is enabled on the Samsung Galaxy Tab devices, and RGB LED is added to BQ Aquaris X5 and BQ Aquaris M5. The QRB4210 RB2 is no longer hard coded to be in peripheral mode, and RPMh sleep stats are added to the SA8775P platform. Camera Control Interface (CCI) controllers are introduced on SC7280. One of the DP PHY compatibles on X13s is updated, to reflect that the it should operate in eDP mode. And missing camera LED pin configuration is added. Flash LED is described fo the SDM845-based OnePlus and Xiaomi devices. Missing description of USB PHY regulators are added to Sony Xperia 10 IV, and modem and ath10k-based WiFi are enabled. The uart for the Bluetooth controller on the SM6375 is added as well. The true rng block is added for SA8775P, SC7280, SM8450, an SM8550.
-
- 13 Nov, 2023 1 commit
-
-
Linus Torvalds authored
-
- 12 Nov, 2023 4 commits
-
-
Miri Korenblit authored
The commands should be sorted inside the group definition. Fix the ordering so we won't get following warning: WARN_ON(iwl_cmd_groups_verify_sorted(trans_cfg)) Link: https://lore.kernel.org/regressions/2fa930bb-54dd-4942-a88d-05a47c8e9731@gmail.com/ Link: https://lore.kernel.org/linux-wireless/CAHk-=wix6kqQ5vHZXjOPpZBfM7mMm9bBZxi2Jh7XnaKCqVf94w@mail.gmail.com/ Fixes: b6e3d1ba ("wifi: iwlwifi: mvm: implement new firmware API for statistics") Tested-by:
Niklāvs Koļesņikovs <pinkflames.linux@gmail.com> Tested-by:
Damian Tometzki <damian@riscv-rocks.de> Acked-by:
Kalle Valo <kvalo@kernel.org> Signed-off-by:
Miri Korenblit <miriam.rachel.korenblit@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
Merge tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc architecture fixes from Helge Deller: - Include the upper 5 address bits when inserting TLB entries on a 64-bit kernel. On physical machines those are ignored, but in qemu it's nice to have them included and to be correct. - Stop the 64-bit kernel and show a warning if someone tries to boot on a machine with a 32-bit CPU - Fix a "no previous prototype" warning in parport-gsc * tag 'parisc-for-6.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Prevent booting 64-bit kernels on PA1.x machines parport: gsc: mark init function static parisc/pgtable: Do not drop upper 5 address bits of physical address
-
Linus Torvalds authored
Merge tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - support PREEMPT_DYNAMIC with static keys - relax memory ordering for atomic operations - support BPF CPU v4 instructions for LoongArch - some build and runtime warning fixes * tag 'loongarch-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: selftests/bpf: Enable cpu v4 tests for LoongArch LoongArch: BPF: Support signed mod instructions LoongArch: BPF: Support signed div instructions LoongArch: BPF: Support 32-bit offset jmp instructions LoongArch: BPF: Support unconditional bswap instructions LoongArch: BPF: Support sign-extension mov instructions LoongArch: BPF: Support sign-extension load instructions LoongArch: Add more instruction opcodes and emit_* helpers LoongArch/smp: Call rcutree_report_cpu_starting() earlier LoongArch: Relax memory ordering for atomic operations LoongArch: Mark __percpu functions as always inline LoongArch: Disable module from accessing external data directly LoongArch: Support PREEMPT_DYNAMIC with static keys
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Finish a refactor of pgprot_framebuffer() which dependend on some changes that were merged via the drm tree - Fix some kernel-doc warnings to quieten the bots Thanks to Nathan Lynch and Thomas Zimmermann. * tag 'powerpc-6.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/rtas: Fix ppc_rtas_rmo_buf_show() kernel-doc powerpc/pseries/rtas-work-area: Fix rtas_work_area_reserve_arena() kernel-doc powerpc/fb: Call internal __phys_mem_access_prot() in fbdev code powerpc: Remove file parameter from phys_mem_access_prot() powerpc/machdep: Remove trailing whitespaces
-
