- 11 Dec, 2018 6 commits
-
-
Yuval Shaia authored
Array iterator stays at the same slot, fix it. Fixes: 8700e3e7 ("Soft RoCE driver") Signed-off-by:
Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Zhu Yanjun <yanjun.zhu@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
Jason Gunthorpe <jgg@mellanox.com>
-
Lijun Ou authored
This patch implements a cmdq to enable the loopback of ssu module according to the modified hardware desgin. The ssu consists of ingress unit, packet buffer and programmable packet process unit. if the loopback bit of ssu is not enabled, the roce packet with loopback bit will fail. Signed-off-by:
Lijun Ou <oulijun@huawei.com> Signed-off-by:
-
Lijun Ou authored
This patch updates the implementation of the mailbox command interface by using command queue instead of operating registers. With this update, the software can be well decoupled with the hardware. Signed-off-by:
Yixian Liu <liuyixian@huawei.com> Signed-off-by:
Wei Hu (Xavier) <xavier.huwei@huawei.com> Signed-off-by:
-
Lijun Ou authored
It will prevent multiply overflow when defines the pbl for u64 type. Signed-off-by:
-
Lijun Ou authored
This patch move the codes of qp state transition into the new function as well as simplify the logic for other qp states transition. Signed-off-by:
-
Lijun Ou authored
It needs to clear qp context previous when init qp context. Otherwise, the newly created qp context residue has the contents of the qp context before the uninstall, and the qp context content is disordered, causing the task to fail. Signed-off-by:
-
- 07 Dec, 2018 21 commits
-
-
Yuval Shaia authored
Before calling the driver's function let's make sure port is valid. Signed-off-by:
-
Jason Gunthorpe authored
Danit Goldberg says: Packet based credit mode Packet based credit mode is an alternative end-to-end credit mode for QPs set during their creation. Credits are transported from the responder to the requester to optimize the use of its receive resources. In packet-based credit mode, credits are issued on a per packet basis. The advantage of this feature comes while sending large RDMA messages through switches that are short in memory. The first commit exposes QP creation flag and the HCA capability. The second commit adds support for a new DV QP creation flag. The last commit report packet based credit mode capability via the MLX5DV device capabilities. * branch 'mlx5-packet-credit-fc': IB/mlx5: Report packet based credit mode device capability IB/mlx5: Add packet based credit mode support net/mlx5: Expose packet based credit mode Signed-off-by: -
Danit Goldberg authored
Report packet based credit mode capability via the mlx5 DV interface. Signed-off-by:
Danit Goldberg <danitg@mellanox.com> Reviewed-by:
Majd Dibbiny <majd@mellanox.com> Signed-off-by:
-
Danit Goldberg authored
The device can support two credit modes, message based (default) and packet based. In order to enable packet based mode, the QP should be created with special flag that indicates this. This patch adds support for the new DV QP creation flag that can be used for RC QPs in order to change the credit mode. Signed-off-by:
-
Danit Goldberg authored
Packet based credit mode bit determines whether the credit mode is done per message or packet. Expose the QP creation flag and the HCA capability. Signed-off-by:
-
Yuval Shaia authored
Utilize rdma_is_port_valid to validate the given port. Signed-off-by:
-
Yuval Shaia authored
Since the function always returns 0 make it void. Signed-off-by:
-
Leon Romanovsky authored
Update UVERBS_OBJECT() macro to properly concatenate the object name. Fixes: e502a864 ("IB/core: Introduce DECLARE_UVERBS_GLOBAL_METHODS") Signed-off-by:
-
Alex Vesker authored
Flow table can be passed as a DEVX object which is a valid destination in an EGRESS flow. Fix the original code to allow that. Fixes: a7ee18bd ("RDMA/mlx5: Allow creating a matcher for a NIC TX flow table") Signed-off-by:
Alex Vesker <valex@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
-
Qian Cai authored
This fixes a compilation warning in sysfs.c drivers/infiniband/hw/mlx4/sysfs.c:360:2: warning: 'strncpy' output may be truncated copying 8 bytes from a string of length 31 [-Wstringop-truncation] By eliminating the temporary stack buffer. Signed-off-by:
Qian Cai <cai@gmx.us> Reviewed-by:
-
Mike Marciniszyn authored
Commit 4e045572 ("IB/hfi1: Add unique txwait_lock for txreq events") laid the ground work to support per resource waiting locking. This patch adds that with a lock unique to each sdma engine and pio sendcontext and makes necessary changes for verbs, PSM, and vnic to use the new locks. This is particularly beneficial for smaller messages that will exhaust resources at a faster rate. Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
Gary Leshner <Gary.S.Leshner@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
-
Mike Marciniszyn authored
The call to sdma_progress() is called outside the wait lock. In this case, there is a race condition where sdma_progress() can return false and the sdma_engine can idle. If that happens, there will be no more sdma interrupts to cause the wakeup and the vnic_sdma xmit will hang. Fix by moving the lock to enclose the sdma_progress() call. Also, delete the tx_retry. The need for this was removed by: commit bcad2913 ("IB/hfi1: Serve the most starved iowait entry first") Fixes: 64551ede ("IB/hfi1: VNIC SDMA support") Reviewed-by:
-
Mike Marciniszyn authored
This patch adds an interface to allow the driver to initialize the QP priv struct when the QP is created and after the qpn has been assigned. A field is added to the QP priv struct to reference the rcd and two new files are added to contain the function to initialize the rcd field so that more TID RDMA related code can be added here later. Signed-off-by:
Kaike Wan <kaike.wan@intel.com> Signed-off-by:
-
Kaike Wan authored
The OPFN and TID RDMA capability bits are added to allow users to control which feature is enabled and disabled. Reviewed-by:
Mitko Haralanov <mitko.haralanov@intel.com> Signed-off-by:
-
Kaike Wan authored
Currently, When a reserved operation is completed, its entry in the send queue will not be unreserved, which leads to the miscalculation of qp->s_avail and thus the triggering of a WARN_ON call trace. This patch fixes the problem by unreserving the reserved operation when it is completed. Fixes: 856cc4c2 ("IB/hfi1: Add the capability for reserved operations") Reviewed-by:
-
Ashutosh Dixit authored
Ingress packet check for 16B/bypass packets should consider the port LMC. Not doing this will result in packets sent to the LMC LIDs getting dropped. The check is implemented in HW for 9B packets. Reviewed-by:
Mike Ruhl <michael.j.ruhl@intel.com> Signed-off-by:
Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by:
-
Michael J. Ruhl authored
An incorrect sge sizing in the HFI PIO path will cause an OOPs similar to this: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] hfi1_verbs_send_pio+0x3d8/0x530 [hfi1] PGD 0 Oops: 0000 1 SMP Call Trace: ? hfi1_verbs_send_dma+0xad0/0xad0 [hfi1] hfi1_verbs_send+0xdf/0x250 [hfi1] ? make_rc_ack+0xa80/0xa80 [hfi1] hfi1_do_send+0x192/0x430 [hfi1] hfi1_do_send_from_rvt+0x10/0x20 [hfi1] rvt_post_send+0x369/0x820 [rdmavt] ib_uverbs_post_send+0x317/0x570 [ib_uverbs] ib_uverbs_write+0x26f/0x420 [ib_uverbs] ? security_file_permission+0x21/0xa0 vfs_write+0xbd/0x1e0 ? mntput+0x24/0x40 SyS_write+0x7f/0xe0 system_call_fastpath+0x16/0x1b Fix by adding the missing sizing check to correctly determine the sge length. Fixes: 77241056 ("IB/hfi1: add driver files") Reviewed-by:
-
Michael J. Ruhl authored
VNIC assumes that all SDMA engines have been configured for use. This is not necessarily true (i.e. if the count was constrained by the module parameter). Update VNICs usage to use the configured count, rather than the hardware count. Reviewed-by:
-
Mitko Haralanov authored
A CA is supposed to ignore FECN bits in multicast, ACK, and CNP packets. This patch corrects the behavior of the HFI1 driver in this regard by ignoring FECNs in those packet types. While fixing the above behavior, fix the extraction of the FECN and BECN bits from the packet headers for both 9B and 16B packets. Furthermore, this patch corrects the driver's response to a FECN in RDMA READ RESPONSE packets. Instead of sending an "empty" ACK, the driver now sends a CNP packet. While editing that code path, add the missing trace for CNP packets. Fixes: 88733e3b ("IB/hfi1: Add 16B UD support") Fixes: f59fb9e0 ("IB/hfi1: Fix handling of FECN marked multicast packet") Reviewed-by:
-
Kaike Wan authored
When it is requested to change its physical state back to Offline while in the process to go up, DC8051 will set the ERROR field in the DC8051_DBG_ERR_INFO_SET_BY_8051 register. This ERROR field will remain until the next time when DC8051 transitions from Offline to Polling. Subsequently, when the host requests DC8051 to change its physical state to Polling again, it may receive a DC8051 interrupt with the stale ERROR field still in DC8051_DBG_ERR_INFO_SET_BY_8051. If the host link state has been changed to Polling, this stale ERROR will force the host to transition to Offline state, resulting in a vicious cycle of Polling ->Offline->Polling->Offline. On the other hand, if the host link state is still Offline when the stale ERROR is received, the stale ERROR will be ignored, and the link will come up correctly. This patch implements the correct behavior by changing host link state to Polling only after DC8051 changes its physical state to Polling. Reviewed-by:
Krzysztof Goreczny <krzysztof.goreczny@intel.com> Signed-off-by:
-
Kaike Wan authored
This patch dumps the pio info for non-user send contexts to assist debugging in the field. Reviewed-by:
-
- 05 Dec, 2018 4 commits
-
-
Lijun Ou authored
This patch implements the process flow of SRQ asynchronous event. Signed-off-by:
-
Lijun Ou authored
This patch implements the SRQ(Share Receive Queue) verbs and update the poll cq verbs to deal with SRQ complentions. Signed-off-by:
-
Lijun Ou authored
This patch inits hem resource for SRQ table, includes SRQWQE and SRQWQE index resource. Signed-off-by:
-
Lijun Ou authored
This patch configures the flags for enabling the SRQ(Share Receive Queue) capacity as well as update the verb of querying device for setting srq specifications. Signed-off-by:
-
- 04 Dec, 2018 9 commits
-
-
Doug Ledford authored
From Yishai, ----------------------------------- This series enriches DEVX support in few aspects: it enables interoperability between DEVX and verbs and improves mechanism for controlling privileged DEVX commands. The first patch updates mlx5 ifc file. Next 3 patches enable modifying and querying verbs objects via the DEVX interface. To achieve that the core layer introduced the 'UVERBS_IDR_ANY_OBJECT' type to match any IDR object. Once it's used by some driver's method, the infrastructure skips checking for the IDR type and it becomes the driver handler responsibility. The DEVX methods of modify and query were changed to get any object type via the 'UVERBS_IDR_ANY_OBJECT' mechanism. The type checking is done per object as part of the driver code. The next 3 patches introduce more robust mechanism for controlling privileged DEVX commands. The responsibility to block/allow per command was moved to be done in the firmware based on the UID credentials that the driver reports upon user context creation. This enables more granularity per command based on the device security model and the user credentials. In addition, by introducing a valid range for 'general commands' we prevent the need to touch the driver's code any time that a new future command will be added. The last patch fixes the XRC verbs flow once a DEVX context is used. This is needed as XRCD is some shared kernel resource and as such a kernel UID (=0) should be used in its related resources. Thanks Yishai Hadas ----------------------------------- The top 6 patches are the mlx5-devx series, the remainder are from the mlx5-next tree as the mlx5-devx series depended on the mlx5-next mlx5_ifc file update. * mlx5-devx: (42 commits) IB/mlx5: Allow XRC usage via verbs in DEVX context IB/mlx5: Update the supported DEVX commands IB/mlx5: Enforce DEVX privilege by firmware IB/mlx5: Enable modify and query verbs objects via DEVX IB/core: Enable getting an object type from a given uobject IB/core: Introduce UVERBS_IDR_ANY_OBJECT net/mlx5: Update mlx5_ifc with DEVX UCTX capabilities bits RDMA/mlx5: Unfold modify RMP function RDMA/mlx5: Unfold create RMP function RDMA/mlx5: Initialize SRQ tables on mlx5_ib RDMA/mlx5: Update SRQ functions signatures to mlx5_ib format RDMA/mlx5: Use stages for callback to setup and release DEVX RDMA/mlx5: Remove SRQ signature global flag net/mlx5: Move SRQ functions to RDMA part net/mlx5: Remove references to local mlx5_core functions net/mlx5: Remove not-used lib/eq.h header file net/mlx5: Remove dead transobj code net/mlx5: Align SRQ licenses and copyright information net/mlx5: Debug print for forwarded async events net/mlx5: Forward SRQ resource events ... Signed-off-by:Doug Ledford <dledford@redhat.com>
-
Yishai Hadas authored
Allows XRC usage from the verbs flow in a DEVX context. As XRCD is some shared kernel resource between processes it should be created with UID=0 to point on that. As a result once XRC QP/SRQ are created they must be used as well with UID=0 so that firmware will allow the XRCD usage. Signed-off-by:
Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by:
-
Yishai Hadas authored
Update the supported DEVX commands, it includes adding to the query/modify command's list and to the encoding handling. In addition, a valid range for general commands was added to be used for future commands. Signed-off-by:
-
Yishai Hadas authored
Enforce DEVX privilege by firmware, this enables future device functionality without the need to make driver changes unless a new privilege type will be introduced. Signed-off-by:
-
Yishai Hadas authored
Enables modify and query verbs objects via the DEVX interface. To support this the above DEVX handlers were changed to get any object type via the UVERBS_IDR_ANY_OBJECT mechanism. The type checking and handling is done per object as part of the driver code. Signed-off-by:
-
Yishai Hadas authored
Enable getting an object type from a given uobject, the type is saved upon tree merging and is returned as part of some helper function. Signed-off-by:
-
Yishai Hadas authored
Introduce the UVERBS_IDR_ANY_OBJECT type to match any IDR object. Once used, the infrastructure skips checking for the IDR type, it becomes the driver handler responsibility. This enables drivers to get in a given method an object from various of types. Signed-off-by:
-
Doug Ledford authored
The enhanced devx support series needs commit: 9d43faac ("net/mlx5: Update mlx5_ifc with DEVX UCTX capabilities bits") Signed-off-by:
-
Yishai Hadas authored
Expose device capabilities for DEVX user context, it includes which caps the device is supported and a matching bit to set as part of user context creation. Signed-off-by:
-
