- 16 Feb, 2024 1 commit
-
-
Adrian Hunter authored
The test needs a struct machine and creates one for the current host, but a side-effect is that struct machine has set up kernel maps including module maps. If the 'Symbols' test --dso option specifies a current kernel module, it will already be present as a kernel dso, and a map with kmaps needs to be used otherwise there will be a segfault - see below. For that case, find the existing map and use that. In that case also, the dso is split by section into multiple dsos, so test those dsos also. That in turn, shows up that those dsos have not had overlapping symbols removed, so the test fails. Example: Before: $ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/arch/x86/kvm/kvm-intel.ko 70: Symbols : --- start --- Testing /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko Segmentation fault (core dumped) After: $ perf test -F -v Symbols --dso /lib/modules/$(uname -r)/kernel/arch/x86/kvm/kvm-intel.ko 70: Symbols : --- start --- Testing /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko Overlapping symbols: 41d30-41fbb l vmx_init 41d30-41fbb g init_module ---- end ---- Symbols: FAILED! Signed-off-by:Adrian Hunter <adrian.hunter@intel.com> Reviewed-by:
Ian Rogers <irogers@google.com> Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20240131192416.16387-1-adrian.hunter@intel.com
-
- 15 Feb, 2024 4 commits
-
-
Leo Yan authored
The target is to allow the tool to always enable the perf register feature for native parsing and cross parsing, and current code doesn't depend on the macro 'HAVE_PERF_REGS_SUPPORT'. This patch remove the variable 'NO_PERF_REGS' and the defined macro 'HAVE_PERF_REGS_SUPPORT' from the Makefile. Signed-off-by:
Leo Yan <leo.yan@linux.dev> Reviewed-by:
-
Leo Yan authored
Every architecture can provide a register list for sampling. If an architecture doesn't support register sampling, it won't define the data structure 'sample_reg_masks'. Consequently, any code using this structure must be protected by the macro 'HAVE_PERF_REGS_SUPPORT'. This patch defines a weak function, arch__sample_reg_masks(), which will be replaced by an architecture-defined function for returning the architecture's register list. With this refactoring, the function always exists, the condition checking for 'HAVE_PERF_REGS_SUPPORT' is not needed anymore, so remove it. Signed-off-by:
-
Leo Yan authored
Currently, the macro HAVE_PERF_REGS_SUPPORT is used as a switch to turn on or turn off the code of perf registers. If any architecture cannot support perf register, it disables the perf register parsing, for both the native parsing and cross parsing for other architectures. To support both the native parsing and cross parsing, the tool should always build the perf regs functions. Thus, this patch removes HAVE_PERF_REGS_SUPPORT from the perf regs files. Signed-off-by:
-
Leo Yan authored
CONFIG_PERF_REGS is not used, remove it. Signed-off-by:
-
- 13 Feb, 2024 4 commits
-
-
Ian Rogers authored
Counts were switched from the scaled saved value form to the aggregated count to avoid double accounting. When this happened the removing of scaling for a count should have been removed, however, it wasn't and this wasn't observed as it normally doesn't matter because a counter's scale is 1. A problem was observed with RAPL events that are scaled. Fixes: 37cc8ad7 ("perf metric: Directly use counts rather than saved_value") Signed-off-by:
Kan Liang <kan.liang@linux.intel.com> Cc: K Prateek Nayak <kprateek.nayak@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Kaige Ye <ye@kaige.org> Cc: John Garry <john.g.garry@oracle.com> Signed-off-by:
-
Ian Rogers authored
Cycles is recognized as part of a hard coded metric in stat-shadow.c, it may call print_metric_only with a NULL fmt string leading to a segfault. Handle the NULL fmt explicitly. Fixes: 088519f3 ("perf stat: Move the display functions to stat-display.c") Signed-off-by:
-
Ian Rogers authored
Events in metrics cannot use '/' as a separator, it would be recognized as a divide, so they use '@'. The '@' is recognized in the metricgroups code and changed to '/', do the same in the has_event function so that the parsing is only tried without the @s. Fixes: 4a4a9bf9 ("perf expr: Add has_event function") Signed-off-by:
-
Ian Rogers authored
Currently only floating point numbers can be parsed, add a special case for NaN. Signed-off-by:
-
- 12 Feb, 2024 7 commits
-
-
Ian Rogers authored
After this change maps__nr_maps is only used by tests, existing users are migrated to maps__empty. Compute maps__empty under the read lock. Signed-off-by:
-
Ian Rogers authored
Move the struct into the C file. Add maps__equal to work around exposing the struct for reference count checking. Add accessors for the unwind_libunwind_ops. Move maps_list_node to its only use in symbol.c. Signed-off-by:
-
Ian Rogers authored
Finding a map is done under a lock, returning the map without a reference count means it can be removed without notice and causing uses after free. Grab a reference count to the map within the lock region and return this. Fix up locations that need a map__put following this. Signed-off-by:
-
Ian Rogers authored
Finding a map is done under a lock, returning the map without a reference count means it can be removed without notice and causing uses after free. Grab a reference count to the map within the lock region and return this. Fix up locations that need a map__put following this. Also fix some reference counted pointer comparisons. Signed-off-by:
-
Ian Rogers authored
Finding a map is done under a lock, returning the map without a reference count means it can be removed without notice and causing uses after free. Grab a reference count to the map within the lock region and return this. Fix up locations that need a map__put following this. Signed-off-by:
-
Ian Rogers authored
Maps is a collection of maps primarily sorted by the starting address of the map. Prior to this change the maps were held in an rbtree requiring 4 pointers per node. Prior to reference count checking, the rbnode was embedded in the map so 3 pointers per node were necessary. This change switches the rbtree to an array lazily sorted by address, much as the array sorting nodes by name. 1 pointer is needed per node, but to avoid excessive resizing the backing array may be twice the number of used elements. Meaning the memory overhead is roughly half that of the rbtree. For a perf record with "--no-bpf-event -g -a" of true, the memory overhead of perf inject is reduce fom 3.3MB to 3MB, so 10% or 300KB is saved. Map inserts always happen at the end of the array. The code tracks whether the insertion violates the sorting property. O(log n) rb-tree complexity is switched to O(1). Remove slides the array, so O(log n) rb-tree complexity is degraded to O(n). A find may need to sort the array using qsort which is O(n*log n), but in general the maps should be sorted and so average performance should be O(log n) as with the rbtree. An rbtree node consumes a cache line, but with the array 4 nodes fit on a cache line. Iteration is simplified to scanning an array rather than pointer chasing. Overall it is expected the performance after the change should be comparable to before, but with half of the memory consumed. To avoid a list and repeated logic around splitting maps, maps__merge_in is rewritten in terms of maps__fixup_overlap_and_insert. maps_merge_in splits the given mapping inserting remaining gaps. maps__fixup_overlap_and_insert splits the existing mappings, then adds the incoming mapping. By adding the new mapping first, then re-inserting the existing mappings the splitting behavior matches. Signed-off-by:
-
Namhyung Kim authored
To get some fixes in the perf test and JSON metrics into the development branch. Signed-off-by:
-
- 10 Feb, 2024 1 commit
-
-
Ian Rogers authored
The child_process for addr2line sets in and out to -1 so that pipes get created. It is the caller's responsibility to close the pipes, finish_command doesn't do it. Add the missed closes. Fixes: b3801e79 ("perf srcline: Simplify addr2line subprocess") Signed-off-by:
-
- 09 Feb, 2024 7 commits
-
-
Yicong Yang authored
Some platforms have 'cluster' topology and CPUs in the cluster will share resources like L3 Cache Tag (for HiSilicon Kunpeng SoC) or L2 cache (for Intel Jacobsville). Currently parsing and building cluster topology have been supported since [1]. perf stat has already supported aggregation for other topologies like die or socket, etc. It'll be useful to aggregate per-cluster to find problems like L3T bandwidth contention. This patch add support for "--per-cluster" option for per-cluster aggregation. Also update the docs and related test. The output will be like: [root@localhost tmp]# perf stat -a -e LLC-load --per-cluster -- sleep 5 Performance counter stats for 'system wide': S56-D0-CLS158 4 1,321,521,570 LLC-load S56-D0-CLS594 4 794,211,453 LLC-load S56-D0-CLS1030 4 41,623 LLC-load S56-D0-CLS1466 4 41,646 LLC-load S56-D0-CLS1902 4 16,863 LLC-load S56-D0-CLS2338 4 15,721 LLC-load S56-D0-CLS2774 4 22,671 LLC-load [...] On a legacy system without cluster or cluster support, the output will be look like: [root@localhost perf]# perf stat -a -e cycles --per-cluster -- sleep 1 Performance counter stats for 'system wide': S56-D0-CLS0 64 18,011,485 cycles S7182-D0-CLS0 64 16,548,835 cycles Note that this patch doesn't mix the cluster information in the outputs of --per-core to avoid breaking any tools/scripts using it. Note that perf recently supports "--per-cache" aggregation, but it's not the same with the cluster although cluster CPUs may share some cache resources. For example on my machine all clusters within a die share the same L3 cache: $ cat /sys/devices/system/cpu/cpu0/cache/index3/shared_cpu_list 0-31 $ cat /sys/devices/system/cpu/cpu0/topology/cluster_cpus_list 0-3 [1] commit c5e22fef ("topology: Represent clusters of CPUs within a die") Tested-by:
Jie Zhan <zhanjie9@hisilicon.com> Reviewed-by:
Tim Chen <tim.c.chen@linux.intel.com> Reviewed-by:
Yicong Yang <yangyicong@hisilicon.com> Cc: james.clark@arm.com Cc: 21cnbao@gmail.com Cc: prime.zeng@hisilicon.com Cc: Jonathan.Cameron@huawei.com Cc: fanghao11@huawei.com Cc: linuxarm@huawei.com Cc: tim.c.chen@intel.com Cc: linux-arm-kernel@lists.infradead.org Signed-off-by:
-
Namhyung Kim authored
When it converts sample IP to or from objdump-capable one, there's a comment saying that kernel modules have DSO_SPACE__USER. But commit 02213cec ("perf maps: Mark module DSOs with kernel type") changed it and makes the comment confusing. Let's get rid of it. Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by:
-
Yang Jihong authored
slist needs to be freed in both error path and normal path in thread_map__new_by_tid_str(). Fixes: b52956c9 ("perf tools: Allow multiple threads or processes in record, stat, top") Reviewed-by:
Yang Jihong <yangjihong1@huawei.com> Signed-off-by:
-
Yang Jihong authored
The curr_pid and cpu_last_switched are used only for the 'perf sched replay/latency/map'. Put their initialization in perf_sched__{lat|map|replay () to reduce unnecessary actions in other commands. Simple functional testing: # perf sched record perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.209 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 16.456 MB perf.data (147907 samples) ] # perf sched lat ------------------------------------------------------------------------------------------------------------------------------------------- Task | Runtime ms | Switches | Avg delay ms | Max delay ms | Max delay start | Max delay end | ------------------------------------------------------------------------------------------------------------------------------------------- sched-messaging:(401) | 2990.699 ms | 38705 | avg: 0.661 ms | max: 67.046 ms | max start: 456532.624830 s | max end: 456532.691876 s qemu-system-x86:(7) | 179.764 ms | 2191 | avg: 0.152 ms | max: 21.857 ms | max start: 456532.576434 s | max end: 456532.598291 s sshd:48125 | 0.522 ms | 2 | avg: 0.037 ms | max: 0.046 ms | max start: 456532.514610 s | max end: 456532.514656 s <SNIP> ksoftirqd/11:82 | 0.063 ms | 1 | avg: 0.005 ms | max: 0.005 ms | max start: 456532.769366 s | max end: 456532.769371 s kworker/9:0-mm_:34624 | 0.233 ms | 20 | avg: 0.004 ms | max: 0.007 ms | max start: 456532.690804 s | max end: 456532.690812 s migration/13:93 | 0.000 ms | 1 | avg: 0.004 ms | max: 0.004 ms | max start: 456532.512669 s | max end: 456532.512674 s ----------------------------------------------------------------------------------------------------------------- TOTAL: | 3180.750 ms | 41368 | --------------------------------------------------- # echo $? 0 # perf sched map *A0 456532.510141 secs A0 => migration/0:15 *. 456532.510171 secs . => swapper:0 . *B0 456532.510261 secs B0 => migration/1:21 . *. 456532.510279 secs <SNIP> L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . . 456532.785979 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . . 456532.786054 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . . 456532.786127 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 . 456532.786197 secs L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 L7 *L7 456532.786270 secs # echo $? 0 # perf sched replay run measurement overhead: 108 nsecs sleep measurement overhead: 66473 nsecs the run test took 1000002 nsecs the sleep test took 1082686 nsecs nr_run_events: 49334 nr_sleep_events: 50054 nr_wakeup_events: 34701 target-less wakeups: 165 multi-target wakeups: 766 task 0 ( swapper: 0), nr_events: 15419 task 1 ( swapper: 1), nr_events: 1 task 2 ( swapper: 2), nr_events: 1 <SNIP> task 715 ( sched-messaging: 110248), nr_events: 1438 task 716 ( sched-messaging: 110249), nr_events: 512 task 717 ( sched-messaging: 110250), nr_events: 500 task 718 ( sched-messaging: 110251), nr_events: 537 task 719 ( sched-messaging: 110252), nr_events: 823 ------------------------------------------------------------ #1 : 1325.288, ravg: 1325.29, cpu: 7823.35 / 7823.35 #2 : 1363.606, ravg: 1329.12, cpu: 7655.53 / 7806.56 #3 : 1349.494, ravg: 1331.16, cpu: 7544.80 / 7780.39 #4 : 1311.488, ravg: 1329.19, cpu: 7495.13 / 7751.86 #5 : 1309.902, ravg: 1327.26, cpu: 7266.65 / 7703.34 #6 : 1309.535, ravg: 1325.49, cpu: 7843.86 / 7717.39 #7 : 1316.482, ravg: 1324.59, cpu: 7854.41 / 7731.09 #8 : 1366.604, ravg: 1328.79, cpu: 7955.81 / 7753.57 #9 : 1326.286, ravg: 1328.54, cpu: 7466.86 / 7724.90 #10 : 1356.653, ravg: 1331.35, cpu: 7566.60 / 7709.07 # echo $? 0 Signed-off-by: -
Yang Jihong authored
The curr_thread is used only for the 'perf sched map'. Put initialization in perf_sched__map() to reduce unnecessary actions in other commands. Simple functional testing: # perf sched record perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.197 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 15.526 MB perf.data (140095 samples) ] # perf sched map *A0 451264.532445 secs A0 => migration/0:15 *. 451264.532468 secs . => swapper:0 . *B0 451264.532537 secs B0 => migration/1:21 . *. 451264.532560 secs . . *C0 451264.532644 secs C0 => migration/2:27 . . *. 451264.532668 secs . . . *D0 451264.532753 secs D0 => migration/3:33 . . . *. 451264.532778 secs . . . . *E0 451264.532861 secs E0 => migration/4:39 . . . . *. 451264.532886 secs . . . . . *F0 451264.532973 secs F0 => migration/5:45 <SNIP> A7 A7 A7 A7 A7 *A7 . . . . . . . . . . 451264.790785 secs A7 A7 A7 A7 A7 A7 *A7 . . . . . . . . . 451264.790858 secs A7 A7 A7 A7 A7 A7 A7 *A7 . . . . . . . . 451264.790934 secs A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . . . . . 451264.791004 secs A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . . . . 451264.791075 secs A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . . . 451264.791143 secs A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . . 451264.791232 secs A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . . 451264.791336 secs A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . . 451264.791407 secs A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 . 451264.791484 secs A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 A7 *A7 451264.791553 secs # echo $? 0 Signed-off-by: -
Yang Jihong authored
perf_sched__map() needs to free memory of map_cpus, color_pids and color_cpus in normal path and rollback allocated memory in error path. Signed-off-by:
-
Yang Jihong authored
The start_work_mutex and work_done_wait_mutex are used only for the 'perf sched replay'. Put their initialization in perf_sched__replay () to reduce unnecessary actions in other commands. Simple functional testing: # perf sched record perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 0.197 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 14.952 MB perf.data (134165 samples) ] # perf sched replay run measurement overhead: 108 nsecs sleep measurement overhead: 65658 nsecs the run test took 999991 nsecs the sleep test took 1079324 nsecs nr_run_events: 42378 nr_sleep_events: 43102 nr_wakeup_events: 31852 target-less wakeups: 17 multi-target wakeups: 712 task 0 ( swapper: 0), nr_events: 10451 task 1 ( swapper: 1), nr_events: 3 task 2 ( swapper: 2), nr_events: 1 <SNIP> task 717 ( sched-messaging: 74483), nr_events: 152 task 718 ( sched-messaging: 74484), nr_events: 1944 task 719 ( sched-messaging: 74485), nr_events: 73 task 720 ( sched-messaging: 74486), nr_events: 163 task 721 ( sched-messaging: 74487), nr_events: 942 task 722 ( sched-messaging: 74488), nr_events: 78 task 723 ( sched-messaging: 74489), nr_events: 1090 ------------------------------------------------------------ #1 : 1366.507, ravg: 1366.51, cpu: 7682.70 / 7682.70 #2 : 1410.072, ravg: 1370.86, cpu: 7723.88 / 7686.82 #3 : 1396.296, ravg: 1373.41, cpu: 7568.20 / 7674.96 #4 : 1381.019, ravg: 1374.17, cpu: 7531.81 / 7660.64 #5 : 1393.826, ravg: 1376.13, cpu: 7725.25 / 7667.11 #6 : 1401.581, ravg: 1378.68, cpu: 7594.82 / 7659.88 #7 : 1381.337, ravg: 1378.94, cpu: 7371.22 / 7631.01 #8 : 1373.842, ravg: 1378.43, cpu: 7894.92 / 7657.40 #9 : 1364.697, ravg: 1377.06, cpu: 7324.91 / 7624.15 #10 : 1363.613, ravg: 1375.72, cpu: 7209.55 / 7582.69 # echo $? 0 Signed-off-by:
-
- 08 Feb, 2024 3 commits
-
-
Yicong Yang authored
stat+std_output.sh test fails on my arm64 machine: [root@localhost shell]# ./stat+std_output.sh Checking STD output: no args Unknown event name in TopDownL1 # 0.18 retiring [root@localhost shell]# ./stat+std_output.sh Checking STD output: no args [Success] Checking STD output: system wide [Success] Checking STD output: interval [Success] Checking STD output: per thread Unknown event name in tmux: server-1114960 # 0.41 frontend_bound When no args specified `perf stat` will add TopdownL1 metric group and the output will be like: [root@localhost shell]# perf stat -- stress-ng --vm 1 --timeout 1 stress-ng: info: [3351733] setting to a 1 second run per stressor stress-ng: info: [3351733] dispatching hogs: 1 vm stress-ng: info: [3351733] successful run completed in 1.02s Performance counter stats for 'stress-ng --vm 1 --timeout 1': 1,037.71 msec task-clock # 1.000 CPUs utilized 13 context-switches # 12.528 /sec 1 cpu-migrations # 0.964 /sec 67,544 page-faults # 65.090 K/sec 2,691,932,561 cycles # 2.594 GHz (74.56%) 6,571,333,653 instructions # 2.44 insn per cycle (74.92%) 521,863,142 branches # 502.901 M/sec (75.21%) 425,879 branch-misses # 0.08% of all branches (87.57%) TopDownL1 # 0.61 retiring (87.67%) # 0.03 frontend_bound (87.67%) # 0.02 bad_speculation (87.67%) # 0.34 backend_bound (74.61%) 1.038138390 seconds time elapsed 0.844849000 seconds user 0.189053000 seconds sys Metrics in group TopDownL1 don't have event name on arm64 but are not listed in the $skip_metric list which they should be listed. Add them to the skip list as what does for x86 platforms in [1]. [1] commit 4d60e83d ("perf test: Skip metrics w/o event name in stat STD output linter") Signed-off-by: -
Adrian Hunter authored
Currently perf does not record module section addresses except for the .text section. In general that means perf cannot get module section mappings correct (except for .text) when loading symbols from a kernel module file. (Note using --kcore does not have this issue) Improve that situation slightly by identifying executable sections that use the same mapping as the .text section. That happens when an executable section comes directly after the .text section, both in memory and on file, something that can be determined by following the same layout rules used by the kernel, refer kernel layout_sections(). Note whether that happens is somewhat arbitrary, so this is not a final solution. Example from tracing a virtual machine process: Before: $ perf script | grep unknown CPU 0/KVM 1718 203.511270: 318341 cpu-cycles:P: ffffffffc13e8a70 [unknown] (/lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko) $ perf script -vvv 2>&1 >/dev/null | grep kvm.intel | grep 'noinstr.text\|ffff' Map: 0-7e0 41430 [kvm_intel].noinstr.text Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko After: $ perf script | grep 203.511270 CPU 0/KVM 1718 203.511270: 318341 cpu-cycles:P: ffffffffc13e8a70 vmx_vmexit+0x0 (/lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko) $ perf script -vvv 2>&1 >/dev/null | grep kvm.intel | grep 'noinstr.text\|ffff' Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko Reported-by:Like Xu <like.xu.linux@gmail.com> Signed-off-by:
-
Adrian Hunter authored
Dump kmaps if using 'perf --debug kmaps' or verbose > 2 (e.g. -vvv) for tools 'perf script' and 'perf report' if there is no browser. Example: $ perf --debug kmaps script 2>&1 >/dev/null | grep kvm.intel build id event received for /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko: 0691d75e10e72ebbbd45a44c59f6d00a5604badf [20] Map: 0-3a3 4f5d8 [kvm_intel].modinfo Map: 0-5240 5f280 [kvm_intel]__versions Map: 0-30 64 [kvm_intel].note.Linux Map: 0-14 644c0 [kvm_intel].orc_header Map: 0-5297 43680 [kvm_intel].rodata Map: 0-5bee 3b837 [kvm_intel].text.unlikely Map: 0-7e0 41430 [kvm_intel].noinstr.text Map: 0-2080 713c0 [kvm_intel].bss Map: 0-26 705c8 [kvm_intel].data..read_mostly Map: 0-5888 6a4c0 [kvm_intel].data Map: 0-22 70220 [kvm_intel].data.once Map: 0-40 705f0 [kvm_intel].data..percpu Map: 0-1685 41d20 [kvm_intel].init.text Map: 0-4b8 6fd60 [kvm_intel].init.data Map: 0-380 70248 [kvm_intel]__dyndbg Map: 0-8 70218 [kvm_intel].exit.data Map: 0-438 4f980 [kvm_intel]__param Map: 0-5f5 4ca0f [kvm_intel].rodata.str1.1 Map: 0-3657 493b8 [kvm_intel].rodata.str1.8 Map: 0-e0 70640 [kvm_intel].data..ro_after_init Map: 0-500 70ec0 [kvm_intel].gnu.linkonce.this_module Map: ffffffffc13a7000-ffffffffc1421000 a0 /lib/modules/6.7.2-local/kernel/arch/x86/kvm/kvm-intel.ko The example above shows how the module section mappings are all wrong except for the main .text mapping at 0xffffffffc13a7000. Signed-off-by:
-
- 07 Feb, 2024 3 commits
-
-
Namhyung Kim authored
Currently pipe mode doesn't set the file size and it results in a misleading message of 0 data size at the end. Although it might miss some accounting for pipe header or more, just displaying the data size would reduce the possible confusion. Before: $ perf record -o- perf test -w noploop | perf report -i- -q --percent-limit=1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.000 MB - ] <====== (here) 99.58% perf perf [.] noploop After: $ perf record -o- perf test -w noploop | perf report -i- -q --percent-limit=1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.229 MB - ] 99.46% perf perf [.] noploop Signed-off-by: -
Kan Liang authored
With the srcline option, the perf script only prints a source line at the beginning of a sample with call/ret from functions, but not for each jump in brstackinsn. It's useful to print a source line for each jump in brstackinsn when the end user analyze the full assembler sequences of branch sequences for the sample. The srccode option can also be used to locate the source code line. However, it's printed almost for every line and makes the output less readable. $perf script -F +brstackinsn,+srcline --xed Before the patch, tchain_edit_deb 1463275 15228549.107820: 282495 instructions:u: 401133 f3+0xd (/home/kan/os.li> tchain_edit.c:22 f3+40: tchain_edit.c:20 000000000040114e jle 0x401133 # PRED 6 cycles [6] 0000000000401133 movl -0x4(%rbp), %eax 0000000000401136 and $0x1, %eax 0000000000401139 test %eax, %eax 000000000040113b jz 0x401143 000000000040113d addl $0x1, -0x4(%rbp) 0000000000401141 jmp 0x401147 # PRED 3 cycles [9] 2.00 IPC 0000000000401147 cmpl $0x3e7, -0x4(%rbp) 000000000040114e jle 0x401133 # PRED 6 cycles [15] 0.33 IPC After the patch, tchain_edit_deb 1463275 15228549.107820: 282495 instructions:u: 401133 f3+0xd (/home/kan/os.li> tchain_edit.c:22 f3+40: tchain_edit.c:20 000000000040114e jle 0x401133 srcline: tchain_edit.c:20 # PRED 6 cycles [6] 0000000000401133 movl -0x4(%rbp), %eax 0000000000401136 and $0x1, %eax 0000000000401139 test %eax, %eax 000000000040113b jz 0x401143 000000000040113d addl $0x1, -0x4(%rbp) 0000000000401141 jmp 0x401147 srcline: tchain_edit.c:23 # PRED 3 cycles [9] 2.00 IPC 0000000000401147 cmpl $0x3e7, -0x4(%rbp) 000000000040114e jle 0x401133 srcline: tchain_edit.c:20 # PRED 6 cycles [15] 0.33 IPC Signed-off-by: -
Ian Rogers authored
Updates to struct parse_events_error needed to be carried through to PowerPC specific event parsing. Fixes: fd7b8e8f ("perf parse-events: Print all errors") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
- 06 Feb, 2024 1 commit
-
-
Madhavan Srinivasan authored
Update the Power11 PVR to json mapfile to enable json events. Power11 is PowerISA v3.1 compliant and support Power10 events. Signed-off-by:
Madhavan Srinivasan <maddy@linux.ibm.com> Reviewed-by:
Kajol Jain <kjain@linux.ibm.com> Cc: atrajeev@linux.vnet.ibm.com Cc: disgoel@linux.vnet.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by:
-
- 03 Feb, 2024 2 commits
-
-
Ben Gainey authored
perf script exposes the evsel_name to python scripts as part of the data passed to the sample or tracepoint handler function, and it passes the id and stream_id to the throttled/unthrottled handler functions. This makes matching throttle events and samples difficult. To make this possible, this change exposes the sample id and stream_id values to the script. Signed-off-by:
Ben Gainey <ben.gainey@arm.com> Reviewed-by:
-
Arnaldo Carvalho de Melo authored
When building perf with BPF skels we either copy the minimalistic tools/perf/util/bpf_skel/vmlinux/vmlinux.h or use bpftool to generate a vmlinux from BTF, storing the result in $(SKEL_OUT)/vmlinux.h. We need to remove that when doing a 'make -C tools/perf clean', fix it. Fixes: b7a2d774 ("perf build: Add ability to build with a generated vmlinux.h") Reviewed-by:
-
- 02 Feb, 2024 7 commits
-
-
Ian Rogers authored
Prior to this patch '0' would be dropped as the config values default to 0. Some json values are hex and the string '0' wouldn't match '0x0' as zero. Add a more robust is_zero test to drop these event terms. When encoding numbers as hex, if the number is between 0 and 9 inclusive then don't add a 0x prefix. Update test expectations for these changes. On x86 this reduces the event/metric C string by 58,411 bytes. Signed-off-by:
-
Ian Rogers authored
Prior to this patch the first and the last error encountered during parsing are printed. To see other errors verbose needs enabling. Unfortunately this can drop useful errors, in particular on terms. This patch changes the errors so that instead of the first and last all errors are recorded and printed, the underlying data structure is changed to a list. Before: ``` $ perf stat -e 'slots/edge=2/' true event syntax error: 'slots/edge=2/' \___ Bad event or PMU Unable to find PMU or event on a PMU of 'slots' Initial error: event syntax error: 'slots/edge=2/' \___ Cannot find PMU `slots'. Missing kernel support? Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ``` After: ``` $ perf stat -e 'slots/edge=2/' true event syntax error: 'slots/edge=2/' \___ Bad event or PMU Unable to find PMU or event on a PMU of 'slots' event syntax error: 'slots/edge=2/' \___ value too big for format (edge), maximum is 1 event syntax error: 'slots/edge=2/' \___ Cannot find PMU `slots'. Missing kernel support? Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ``` Signed-off-by:James Clark <james.clark@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: tchen168@asu.edu Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Signed-off-by:
-
Ian Rogers authored
A PMU event/alias will have a set of format terms that replace it when an event is parsed. The location of the terms is their position when parsed for the event/alias either from sysfs or json. This location is of little use when an event fails to parse as the error will be given in terms of the location in the string of events parsed not the json or sysfs string. Fix this by making the cloned terms location that of the event/alias. If a cloned term from an event/alias is invalid the bad format is hard to determine from the error string. Add the name of the bad format into the error string. Signed-off-by:
-
Ian Rogers authored
It is assumed that debug statements always print a newline, fix two missing ones. Signed-off-by:
-
Andi Kleen authored
Add some (hopefully useful) hints to tips.txt Also some minor corrections. Would probably good to make it a reviewer rule that if generally useful options are added the patch must add an example to tips.txt Signed-off-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Weilin Wang authored
The original test report was too complicated to read with information that not really useful. This new update simplify the report which should largely improve the readibility. Signed-off-by:
Weilin Wang <weilin.wang@intel.com> Reviewed-by:
-
Andi Kleen authored
Prevent a perf report segfault with the (non sensical) --no-parent option Signed-off-By:
-
