The test fails because of a recent fix to the verifier, even though this
program is valid. In details what happens is:

    7: (61) r1 = *(u32 *)(r0 +0)

Load a 32-bit value, with signed bounds [S32_MIN, S32_MAX]. The bounds
of the 64-bit value are [0, U32_MAX]...

    8: (65) if r1 s> 0xffffffff goto pc+1

... therefore this is always true (the operand is sign-extended).

    10: (b4) w2 = 11
    11: (6d) if r2 s> r1 goto pc+1

When true, the 64-bit bounds become [0, 10]. The 32-bit bounds are still
[S32_MIN, 10].

    13: (64) w1 <<= 2

Because this is a 32-bit operation, the verifier propagates the new
32-bit bounds to the 64-bit ones, and the knowledge gained from insn 11
is lost.

    14: (0f) r0 += r1
    15: (7a) *(u64 *)(r0 +0) = 4

Then the verifier considers r0 unbounded here, rejecting the test. To
make the test work, change insn 8 to check the sign of the 32-bit value.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

After a 32-bit load followed by a branch, the verifier would reduce the
maximum bound of the register to 0x7fffffff, allowing a user to bypass
bound checks. Ensure such a program is rejected.

In the second test, the 64-bit compare should not sufficient to
determine whether the signed 32-bit lower bound is 0, so the verifier
should reject the second branch.
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The 64-bit signed bounds should not affect 32-bit signed bounds unless the
verifier knows that upper 32-bits are either all 1s or all 0s. For example the
register with smin_value==1 doesn't mean that s32_min_value is also equal to 1,
since smax_value could be larger than 32-bit subregister can hold.
The verifier refines the smax/s32_max return value from certain helpers in
do_refine_retval_range(). Teach the verifier to recognize that smin/s32_min
value is also bounded. When both smin and smax bounds fit into 32-bit
subregister the verifier can propagate those bounds.

Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Toke Høiland-Jørgensen says:

====================
This series restores the test_offload.py selftest to working order. It seems a
number of subtle behavioural changes have crept into various subsystems which
broke test_offload.py in a number of ways. Most of these are fairly benign
changes where small adjustments to the test script seems to be the best fix,
but one is an actual kernel bug that I've observed in the wild caused by a bad
interaction between xdp_attachment_flags_ok() and the rework of XDP program
handling in the core netdev code.

Patch 1 fixes the bug by removing xdp_attachment_flags_ok(), and the reminder of
the patches are adjustments to test_offload.py, including a new feature for
netdevsim to force a BPF verification fail. Please see the individual patches
for details.

Changelog:

v4:
  - Accidentally truncated the Fixes: hashes in patches 3/4 to 11 chars
v3:
  - Add Fixes: tags
v2:
  - Replace xdp_attachment_flags_ok() with a check in dev_xdp_attach()
  - Better packing of struct nsim_dev
====================
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

A few of the tests in test_offload.py expects to see a certain number of
maps created, and checks this by counting the number of maps returned by
bpftool. There is already a filter that will remove any maps already there
at the beginning of the test, but bpftool now creates a map for the PID
iterator rodata on each invocation, which makes the map count wrong. Fix
this by also filtering the pid_iter.rodata map by name when counting.

Fixes: d53dee3f ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226387.110217.9887866138149423444.stgit@toke.dk

When setting the ethtool feature flag fails (as expected for the test), the
kernel now tracks that the feature was requested to be 'off' and refuses to
subsequently disable it again. So reset it back to 'on' so a subsequent
disable (that's not supposed to fail) can succeed.

Fixes: 417ec264 ("selftests/bpf: add offload test based on netdevsim")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226280.110217.10696241563705667871.stgit@toke.dk

Commit 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs
in net_device") changed the case of some of the extack messages being
returned when attaching of XDP programs failed. This broke test_offload.py,
so let's fix the test to reflect this.

Fixes: 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226175.110217.11214100824416344952.stgit@toke.dk

Since commit 6f8a57cc ("bpf: Make verifier log more relevant by
default"), the verifier discards log messages for successfully-verified
programs. This broke test_offload.py which is looking for a verification
message from the driver callback. Change test_offload.py to use the toggle
in netdevsim to make the verification fail before looking for the
verification message.

Fixes: 6f8a57cc ("bpf: Make verifier log more relevant by default")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752226069.110217.12370824996153348073.stgit@toke.dk

This adds a new debugfs toggle ('bpf_bind_verifier_accept') that can be
used to make netdevsim reject BPF programs from being accepted by the
verifier. If this toggle (which defaults to true) is set to false,
nsim_bpf_verify_insn() will return EOPNOTSUPP on the last
instruction (after outputting the 'Hello from netdevsim' verifier message).

This makes it possible to check the verification callback in the driver
from test_offload.py in selftests, since the verifier now clears the
verifier log on a successful load, hiding the message from the driver.

Fixes: 6f8a57cc ("bpf: Make verifier log more relevant by default")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225964.110217.12584017165318065332.stgit@toke.dk

Since we just removed the xdp_attachment_flags_ok() callback, also remove
the check for it in test_offload.py, and replace it with a test for the new
ambiguity-avoid check when multiple programs are loaded.

Fixes: 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225858.110217.13036901876869496246.stgit@toke.dk

Since commit 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF
programs in net_device"), the XDP program attachment info is now maintained
in the core code. This interacts badly with the xdp_attachment_flags_ok()
check that prevents unloading an XDP program with different load flags than
it was loaded with. In practice, two kinds of failures are seen:

- An XDP program loaded without specifying a mode (and which then ends up
  in driver mode) cannot be unloaded if the program mode is specified on
  unload.

- The dev_xdp_uninstall() hook always calls the driver callback with the
  mode set to the type of the program but an empty flags argument, which
  means the flags_ok() check prevents the program from being removed,
  leading to bpf prog reference leaks.

The original reason this check was added was to avoid ambiguity when
multiple programs were loaded. With the way the checks are done in the core
now, this is quite simple to enforce in the core code, so let's add a check
there and get rid of the xdp_attachment_flags_ok() callback entirely.

Fixes: 7f0a8382 ("bpf, xdp: Maintain info on attached XDP BPF programs in net_device")
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/160752225751.110217.10267659521308669050.stgit@toke.dk

Helps me use a single account to sign off and send patches use
appropriate email redirection without needing to update MAINTAINERS.
Signed-off-by: KP Singh <kpsingh@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201208214900.80684-1-kpsingh@kernel.org

In case of having so many PID results that they don't fit into a singe page
(4096) bytes, bpftool will erroneously conclude that it got corrupted data due
to 4096 not being a multiple of struct pid_iter_entry, so the last entry will
be partially truncated. Fix this by sizing the buffer to fit exactly N entries
with no truncation in the middle of record.

Fixes: d53dee3f ("tools/bpftool: Show info for processes holding BPF map/prog/link/btf FDs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201204232002.3589803-1-andrii@kernel.org

migrate_disable() is just a wrapper for preempt_disable() in
non-RT kernel. It is safe to replace it, and RT kernel will
benefit.

Note that it is introduced since Feb 2020.
Suggested-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201205075946.497763-2-xiyou.wangcong@gmail.com

The per-cpu bpf_redirect_info is shared among all skb_do_redirect()
and BPF redirect helpers. Callers on RX path are all in BH context,
disabling preemption is not sufficient to prevent BH interruption.

In production, we observed strange packet drops because of the race
condition between LWT xmit and TC ingress, and we verified this issue
is fixed after we disable BH.

Although this bug was technically introduced from the beginning, that
is commit 3a0af8fd ("bpf: BPF for lightweight tunnel infrastructure"),
at that time call_rcu() had to be call_rcu_bh() to match the RCU context.
So this patch may not work well before RCU flavor consolidation has been
completed around v5.0.

Update the comments above the code too, as call_rcu() is now BH friendly.
Signed-off-by: Dongdong Wang <wangdongdong.6@bytedance.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Link: https://lore.kernel.org/bpf/20201205075946.497763-1-xiyou.wangcong@gmail.com

If force_zc is set, we should exit out with an error, not fall back to
copy mode.

Fixes: 921b6869 ("xsk: Enable sharing of dma mappings")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/1607077277-41995-1-git-send-email-zhangchangzhong@huawei.com

Modify the tx writeable condition from the queue is not full to the
number of present tx queues is less than the half of the total number
of queues. Because the tx queue not full is a very short time, this will
cause a large number of EPOLLOUT events, and cause a large number of
process wake up.

Fixes: 35fcde7f ("xsk: support for Tx")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/508fef55188d4e1160747ead64c6dcda36735880.1606555939.git.xuanzhuo@linux.alibaba.com

datagram_poll will judge the current socket status (EPOLLIN, EPOLLOUT)
based on the traditional socket information (eg: sk_wmem_alloc), but
this does not apply to xsk. So this patch uses sock_poll_wait instead of
datagram_poll, and the mask is calculated by xsk_poll.

Fixes: c497176c ("xsk: add Rx receive functions and poll support")
Signed-off-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/e82f4697438cd63edbf271ebe1918db8261b7c09.1606555939.git.xuanzhuo@linux.alibaba.com

Avoid occasional test failures due to the last sample being delayed to
another ring_buffer__poll() call. Instead, drain samples completely with
ring_buffer__consume(). This is supposed to fix a rare and non-deterministic
test failure in libbpf CI.

Fixes: cb1c9ddd ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-2-andrii@kernel.org

Fix ring_buffer__poll() to return the number of non-discarded records
consumed, just like its documentation states. It's also consistent with
ring_buffer__consume() return. Fix up selftests with wrong expected results.

Fixes: bf99c936 ("libbpf: Add BPF ring buffer support")
Fixes: cb1c9ddd ("selftests/bpf: Add BPF ringbuf selftests")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201130223336.904192-1-andrii@kernel.org

It turns out that it does exist a path where xdp_return_buff() is
being passed an XDP buffer of type MEM_TYPE_XSK_BUFF_POOL. This path
is when AF_XDP zero-copy mode is enabled, and a buffer is redirected
to a DEVMAP with an attached XDP program that drops the buffer.

This change simply puts the handling of MEM_TYPE_XSK_BUFF_POOL back
into xdp_return_buff().

Fixes: 82c41671 ("xdp: Simplify xdp_return_{frame, frame_rx_napi, buff}")
Reported-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Link: https://lore.kernel.org/bpf/20201127171726.123627-1-bjorn.topel@gmail.com

GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW  = 1 = IRQ_TYPE_EDGE_RISING

Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
  ACTIVE_LOW  => IRQ_TYPE_LEVEL_LOW
  ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH

Fixes: a1a8b459 ("NFC: pn544: i2c: Add DTS Documentation")
Fixes: 6be88670 ("NFC: nxp-nci_i2c: Add I2C support to NXP NCI driver")
Fixes: e3b32922 ("dt-bindings: can: tcan4x5x: Update binding to use interrupt property")
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for tcan4x5x.txt
Link: https://lore.kernel.org/r/20201026153620.89268-1-krzk@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Dany Madden says:

====================
ibmvnic: assorted bug fixes

Assorted fixes for ibmvnic originated from "[PATCH net 00/15] ibmvnic:
assorted bug fixes" sent by Lijun Pan.
====================

Link: https://lore.kernel.org/r/20201126000432.29897-1-drt@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Reduce the wait time for Command Response Queue response from 30 seconds
to 20 seconds, as recommended by VIOS and Power Hypervisor teams.

Fixes: bd0b6723 ("ibmvnic: Move login and queue negotiation into ibmvnic_open")
Fixes: 53da09e9 ("ibmvnic: Add set_link_state routine for setting adapter link state")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Reset timeout is going off right after adapter reset. This patch ensures
that timeout is scheduled if it has been 5 seconds since the last reset.
5 seconds is the default watchdog timeout.

Fixes: ed651a10 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

send_login() does not check for the result of ibmvnic_send_crq() of the
login request. This results in the driver needlessly retrying the login
10 times even when CRQ is no longer active. Check the return code and
give up in case of errors in sending the CRQ.

The only time we want to retry is if we get a PARITALSUCCESS response
from the partner.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If after ibmvnic sends a LOGIN it gets a FAILOVER, it is possible that
the worker thread will start reset process and free the login response
buffer before it gets a (now stale) LOGIN_RSP. The ibmvnic tasklet will
then try to access the login response buffer and crash.

Have ibmvnic track pending logins and discard any stale login responses.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

If auto-priority failover is enabled, the backing device needs time
to settle if hard resetting fails for any reason. Add a delay of 60
seconds before retrying the hard-reset.

Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In a failed reset, driver could end up in VNIC_PROBED or VNIC_CLOSED
state and cannot recover in subsequent resets, leaving it offline.
This patch restores the adapter state to reset_state, the original
state when reset was called.

Fixes: b27507bb ("net/ibmvnic: unlock rtnl_lock in reset so linkwatch_event can run")
Fixes: 2770a798 ("ibmvnic: Introduce hard reset recovery")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

scrq->msgs could be NULL during device reset, causing Linux to crash.
So, check before memset scrq->msgs.

Fixes: c8b2ad0a ("ibmvnic: Sanitize entire SCRQ buffer on reset")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When ibmvnic fails to reset, it breaks out of the reset loop and frees
all of the remaining resets from the workqueue. Doing so prevents the
adapter from recovering if no reset is scheduled after that. Instead,
have the driver continue to process resets on the workqueue.

Remove the no longer need free_all_rwi().

Fixes: ed651a10 ("ibmvnic: Updated reset handling")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Inconsistent login with the vnicserver is causing the device to be
removed. This does not give the device a chance to recover from error
state. This patch schedules a FATAL reset instead to bring the adapter
up.

Fixes: 032c5e82 ("Driver for IBM System i/p VNIC protocol")
Signed-off-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: Lijun Pan <ljp@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Fix insufficient validation of IPSET_ATTR_IPADDR_IPV6 reported
   by syzbot.

2) Remove spurious reports on nf_tables when lockdep gets disabled,
   from Florian Westphal.

3) Fix memleak in the error path of error path of
   ip_vs_control_net_init(), from Wang Hai.

4) Fix missing control data in flow dissector, otherwise IP address
   matching in hardware offload infra does not work.

5) Fix hardware offload match on prefix IP address when userspace
   does not send a bitwise expression to represent the prefix.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  netfilter: nftables_offload: build mask based from the matching bytes
  netfilter: nftables_offload: set address type in control dissector
  ipvs: fix possible memory leak in ip_vs_control_net_init
  netfilter: nf_tables: avoid false-postive lockdep splat
  netfilter: ipset: prevent uninit-value in hash_ip6_add
====================

Link: https://lore.kernel.org/r/20201127190313.24947-1-pablo@netfilter.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

a proper kernel configuration for running kselftest can be obtained with:

 $ yes | make kselftest-merge

enable compile support for the 'red' qdisc: otherwise, tdc kselftest fail
when trying to run tdc test items contained in red.json.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Link: https://lore.kernel.org/r/cfa23f2d4f672401e6cebca3a321dd1901a9ff07.1606416464.git.dcaratti@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When inet_rtm_getroute() was converted to use the RCU variants of
ip_route_input() and ip_route_output_key(), the TOS parameters
stopped being masked with IPTOS_RT_MASK before doing the route lookup.

As a result, "ip route get" can return a different route than what
would be used when sending real packets.

For example:

    $ ip route add 192.0.2.11/32 dev eth0
    $ ip route add unreachable 192.0.2.11/32 tos 2
    $ ip route get 192.0.2.11 tos 2
    RTNETLINK answers: No route to host

But, packets with TOS 2 (ECT(0) if interpreted as an ECN bit) would
actually be routed using the first route:

    $ ping -c 1 -Q 2 192.0.2.11
    PING 192.0.2.11 (192.0.2.11) 56(84) bytes of data.
    64 bytes from 192.0.2.11: icmp_seq=1 ttl=64 time=0.173 ms

    --- 192.0.2.11 ping statistics ---
    1 packets transmitted, 1 received, 0% packet loss, time 0ms
    rtt min/avg/max/mdev = 0.173/0.173/0.173/0.000 ms

This patch re-applies IPTOS_RT_MASK in inet_rtm_getroute(), to
return results consistent with real route lookups.

Fixes: 3765d35e ("net: ipv4: Convert inet_rtm_getroute to rcu versions of route lookup")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/b2d237d08317ca55926add9654a48409ac1b8f5b.1606412894.git.gnault@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Borkmann says:

====================
pull-request: bpf 2020-11-28

1) Do not reference the skb for xsk's generic TX side since when looped
   back into RX it might crash in generic XDP, from Björn Töpel.

2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
   from Magnus Karlsson.

3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
   from Marek Majtyka.

4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
   from Zhen Lei.

* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  bpf: Add MAINTAINERS entry for BPF LSM
  bpftool: Fix error return value in build_btf_type_table
  net, xsk: Avoid taking multiple skbuff references
  xsk: Fix incorrect netdev reference count
  xsk: Fix umem cleanup bug at socket destruct
  MAINTAINERS: Update XDP and AF_XDP entries
====================

Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Simon Wunderlich says:

====================
Here are some batman-adv bugfixes:

 - Fix head/tailroom issues for fragments, by Sven Eckelmann (3 patches)

* tag 'batadv-net-pullrequest-20201127' of git://git.open-mesh.org/linux-merge:
  batman-adv: Don't always reallocate the fragmentation skb head
  batman-adv: Reserve needed_*room for fragments
  batman-adv: Consider fragmentation for needed_headroom
====================

Link: https://lore.kernel.org/r/20201127173849.19208-1-sw@simonwunderlich.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Netfilter changes PACKET_OTHERHOST to PACKET_HOST before invoking the
hooks as, while it's an expected value for a bridge, routing expects
PACKET_HOST. The change is undone later on after hook traversal. This
can be seen with pairs of functions updating skb>pkt_type and then
reverting it to its original value:

For hook NF_INET_PRE_ROUTING:
  setup_pre_routing / br_nf_pre_routing_finish

For hook NF_INET_FORWARD:
  br_nf_forward_ip / br_nf_forward_finish

But the third case where netfilter does this, for hook
NF_INET_POST_ROUTING, the packet type is changed in br_nf_post_routing
but never reverted. A comment says:

  /* We assume any code from br_dev_queue_push_xmit onwards doesn't care
   * about the value of skb->pkt_type. */

But when having a tunnel (say vxlan) attached to a bridge we have the
following call trace:

  br_nf_pre_routing
  br_nf_pre_routing_ipv6
     br_nf_pre_routing_finish
  br_nf_forward_ip
     br_nf_forward_finish
  br_nf_post_routing           <- pkt_type is updated to PACKET_HOST
     br_nf_dev_queue_xmit      <- but not reverted to its original value
  vxlan_xmit
     vxlan_xmit_one
        skb_tunnel_check_pmtu  <- a check on pkt_type is performed

In this specific case, this creates issues such as when an ICMPv6 PTB
should be sent back. When CONFIG_BRIDGE_NETFILTER is enabled, the PTB
isn't sent (as skb_tunnel_check_pmtu checks if pkt_type is PACKET_HOST
and returns early).

If the comment is right and no one cares about the value of
skb->pkt_type after br_dev_queue_push_xmit (which isn't true), resetting
it to its original value should be safe.

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20201123174902.622102-1-atenart@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fix from Arnd Bergmann:
 "Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.

  This is a single bugfix for a bug that Stefan Agner found on 32-bit
  Arm, but that exists on several other architectures"

* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed

Pull ARM SoC fixes from Arnd Bergmann:
 "Another set of patches for devicetree files and Arm SoC specific
  drivers:

   - A fix for OP-TEE shared memory on non-SMP systems

   - multiple code fixes for the OMAP platform, including one regression
     for the CPSW network driver and a few runtime warning fixes

   - Some DT patches for the Rockchip RK3399 platform, in particular
     fixing the MMC device ordering that recently became
     nondeterministic with async probe.

   - Multiple DT fixes for the Tegra platform, including a regression
     fix for suspend/resume on TX2

   - A regression fix for a user-triggered fault in the NXP dpio driver

   - A regression fix for a bug caused by an earlier bug fix in the
     xilinx firmware driver

   - Two more DTC warning fixes

   - Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
     platform"

* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
  arm64: tegra: Fix Tegra234 VDK node names
  arm64: tegra: Wrong AON HSP reg property size
  arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
  arm64: tegra: Correct the UART for Jetson Xavier NX
  arm64: tegra: Disable the ACONNECT for Jetson TX2
  optee: add writeback to valid memory type
  firmware: xilinx: Use hash-table for api feature check
  firmware: xilinx: Fix SD DLL node reset issue
  soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
  ARM: dts: dra76x: m_can: fix order of clocks
  bus: ti-sysc: suppress err msg for timers used as clockevent/source
  MAINTAINERS: Remove myself as LPC32xx maintainers
  arm64: dts: qcom: clear the warnings caused by empty dma-ranges
  arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
  ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
  arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
  arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
  arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
  arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
  ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
  ...