- 31 Jul, 2019 40 commits
-
-
Daniel Gomez authored
[ Upstream commit 5aa3709c ] MODULE_DEVICE_TABLE(of, <of_match_table>) should be called to complete DT OF mathing mechanism and register it. Before this patch: modinfo ./drivers/mfd/madera.ko | grep alias After this patch: modinfo ./drivers/mfd/madera.ko | grep alias alias: of:N*T*Ccirrus,wm1840C* alias: of:N*T*Ccirrus,wm1840 alias: of:N*T*Ccirrus,cs47l91C* alias: of:N*T*Ccirrus,cs47l91 alias: of:N*T*Ccirrus,cs47l90C* alias: of:N*T*Ccirrus,cs47l90 alias: of:N*T*Ccirrus,cs47l85C* alias: of:N*T*Ccirrus,cs47l85 alias: of:N*T*Ccirrus,cs47l35C* alias: of:N*T*Ccirrus,cs47l35 Reported-by:
Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by:
Daniel Gomez <dagmcr@gmail.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Naveen N. Rao authored
[ Upstream commit 80e5302e ] An impending change to enable HAVE_C_RECORDMCOUNT on powerpc leads to warnings such as the following: # modprobe kprobe_example ftrace-powerpc: Not expected bl: opcode is 3c4c0001 WARNING: CPU: 0 PID: 227 at kernel/trace/ftrace.c:2001 ftrace_bug+0x90/0x318 Modules linked in: CPU: 0 PID: 227 Comm: modprobe Not tainted 5.2.0-rc6-00678-g1c329100b942 #2 NIP: c000000000264318 LR: c00000000025d694 CTR: c000000000f5cd30 REGS: c000000001f2b7b0 TRAP: 0700 Not tainted (5.2.0-rc6-00678-g1c329100b942) MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228222 XER: 00000000 CFAR: c0000000002642fc IRQMASK: 0 <snip> NIP [c000000000264318] ftrace_bug+0x90/0x318 LR [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 Call Trace: [c000000001f2ba40] [0000000000000004] 0x4 (unreliable) [c000000001f2bad0] [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 [c000000001f2bb90] [c00000000020ff10] load_module+0x25b0/0x30c0 [c000000001f2bd00] [c000000000210cb0] sys_finit_module+0xc0/0x130 [c000000001f2be20] [c00000000000bda4] system_call+0x5c/0x70 Instruction dump: 419e0018 2f83ffff 419e00bc 2f83ffea 409e00cc 4800001c 0fe00000 3c62ff96 39000001 39400000 386386d0 480000c4 <0fe00000> 3ce20003 39000001 3c62ff96 ---[ end trace 4c438d5cebf78381 ]--- ftrace failed to modify [<c0080000012a0008>] 0xc0080000012a0008 actual: 01:00:4c:3c Initializing ftrace call sites ftrace record flags: 2000000 (0) expected tramp: c00000000006af4c Looking at the relocation records in __mcount_loc shows a few spurious entries: RELOCATION RECORDS FOR [__mcount_loc]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_ADDR64 .text.unlikely+0x0000000000000008 0000000000000008 R_PPC64_ADDR64 .text.unlikely+0x0000000000000014 0000000000000010 R_PPC64_ADDR64 .text.unlikely+0x0000000000000060 0000000000000018 R_PPC64_ADDR64 .text.unlikely+0x00000000000000b4 0000000000000020 R_PPC64_ADDR64 .init.text+0x0000000000000008 0000000000000028 R_PPC64_ADDR64 .init.text+0x0000000000000014 The first entry in each section is incorrect. Looking at the relocation records, the spurious entries correspond to the R_PPC64_ENTRY records: RELOCATION RECORDS FOR [.text.unlikely]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_REL64 .TOC.-0x0000000000000008 0000000000000008 R_PPC64_ENTRY *ABS* 0000000000000014 R_PPC64_REL24 _mcount <snip> The problem is that we are not validating the return value from get_mcountsym() in sift_rel_mcount(). With this entry, mcountsym is 0, but Elf_r_sym(relp) also ends up being 0. Fix this by ensuring mcountsym is valid before processing the entry. Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by:
Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Naveen N. Rao authored
[ Upstream commit aaf06665 ] Commit ed49f7fd ("powerpc/xmon: Disable tracing when entering xmon") added code to disable recording trace entries while in xmon. The commit introduced a variable 'tracing_enabled' to record if tracing was enabled on xmon entry, and used this to conditionally enable tracing during exit from xmon. However, we are not checking the value of 'fromipi' variable in xmon_core() when setting 'tracing_enabled'. Due to this, when secondary cpus enter xmon, they will see tracing as being disabled already and tracing won't be re-enabled on exit. Fix the same. Fixes: ed49f7fd ("powerpc/xmon: Disable tracing when entering xmon") Signed-off-by:
-
Qian Cai authored
[ Upstream commit 04db3ede ] The powerpc's flush_cache_vmap() is defined as a macro and never use both of its arguments, so it will generate a compilation warning, lib/ioremap.c: In function 'ioremap_page_range': lib/ioremap.c:203:16: warning: variable 'start' set but not used [-Wunused-but-set-variable] Fix it by making it an inline function. Signed-off-by:
Qian Cai <cai@lca.pw> Signed-off-by:
-
Bastien Nocera authored
[ Upstream commit 208a68c8 ] On some machines, iio-sensor-proxy was returning all 0's for IIO sensor values. It turns out that the bits_used for this sensor is 32, which makes the mask calculation: *mask = (1 << 32) - 1; If the compiler interprets the 1 literals as 32-bit ints, it generates undefined behavior depending on compiler version and optimization level. On my system, it optimizes out the shift, so the mask value becomes *mask = (1) - 1; With a mask value of 0, iio-sensor-proxy will always return 0 for every axis. Avoid incorrect 0 values caused by compiler optimization. See original fix by Brett Dutro <brett.dutro@gmail.com> in iio-sensor-proxy: https://github.com/hadess/iio-sensor-proxy/commit/9615ceac7c134d838660e209726cd86aa2064fd3Signed-off-by:
Bastien Nocera <hadess@hadess.net> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Bharat Kumar Gogada authored
[ Upstream commit 181fa434 ] According to the PCI Local Bus specification Revision 3.0, section 6.8.1.3 (Message Control for MSI), endpoints that are Multiple Message Capable as defined by bits [3:1] in the Message Control for MSI can request a number of vectors that is power of two aligned. As specified in section 6.8.1.6 "Message data for MSI", the Multiple Message Enable field (bits [6:4] of the Message Control register) defines the number of low order message data bits the function is permitted to modify to generate its system software allocated vectors. The MSI controller in the Xilinx NWL PCIe controller supports a number of MSI vectors specified through a bitmap and the hwirq number for an MSI, that is the value written in the MSI data TLP is determined by the bitmap allocation. For instance, in a situation where two endpoints sitting on the PCI bus request the following MSI configuration, with the current PCI Xilinx bitmap allocation code (that does not align MSI vector allocation on a power of two boundary): Endpoint #1: Requesting 1 MSI vector - allocated bitmap bits 0 Endpoint #2: Requesting 2 MSI vectors - allocated bitmap bits [1,2] The bitmap value(s) corresponds to the hwirq number that is programmed into the Message Data for MSI field in the endpoint MSI capability and is detected by the root complex to fire the corresponding MSI irqs. The value written in Message Data for MSI field corresponds to the first bit allocated in the bitmap for Multi MSI vectors. The current Xilinx NWL MSI allocation code allows a bitmap allocation that is not a power of two boundaries, so endpoint #2, is allowed to toggle Message Data bit[0] to differentiate between its two vectors (meaning that the MSI data will be respectively 0x0 and 0x1 for the two vectors allocated to endpoint #2). This clearly aliases with the Endpoint #1 vector allocation, resulting in a broken Multi MSI implementation. Update the code to allocate MSI bitmap ranges with a power of two alignment, fixing the bug. Fixes: ab597d35 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Suggested-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by:
-
Will Deacon authored
[ Upstream commit a222061b ] __uint128_t crops up in a few files that export symbols to modules, so teach genksyms about it and the other GCC built-in 128-bit integer types so that we don't end up skipping the CRC generation for some symbols due to the parser failing to spot them: | WARNING: EXPORT symbol "kernel_neon_begin" [vmlinux] version | generation failed, symbol will not be versioned. | ld: arch/arm64/kernel/fpsimd.o: relocation R_AARCH64_ABS32 against | `__crc_kernel_neon_begin' can not be used when making a shared | object | ld: arch/arm64/kernel/fpsimd.o:(.data+0x0): dangerous relocation: | unsupported relocation Reported-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by:
-
Nathan Chancellor authored
[ Upstream commit 589834b3 ] In commit ebcc5928 ("arm64: Silence gcc warnings about arch ABI drift"), the arm64 Makefile added -Wno-psabi to KBUILD_CFLAGS, which is a GCC only option so clang rightfully complains: warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] https://clang.llvm.org/docs/DiagnosticsReference.html#wunknown-warning-option However, by default, this is merely a warning so the build happily goes on with a slew of these warnings in the process. Commit c3f0d0bc ("kbuild, LLVMLinux: Add -Werror to cc-option to support clang") worked around this behavior in cc-option by adding -Werror so that unknown flags cause an error. However, this all happens silently and when an unknown flag is added to the build unconditionally like -Wno-psabi, cc-option will always fail because there is always an unknown flag in the list of flags. This manifested as link time failures in the arm64 libstub because -fno-stack-protector didn't get added to KBUILD_CFLAGS. To avoid these weird cryptic failures in the future, make clang behave like gcc and immediately error when it encounters an unknown flag by adding -Werror=unknown-warning-option to CLANG_FLAGS. This can be added unconditionally for clang because it is supported by at least 3.0.0, according to godbolt [1] and 4.0.0, according to its documentation [2], which is far earlier than we typically support. [1]: https://godbolt.org/z/7F7rm3 [2]: https://releases.llvm.org/4.0.0/tools/clang/docs/DiagnosticsReference.html#wunknown-warning-option Link: https://github.com/ClangBuiltLinux/linux/issues/511 Link: https://github.com/ClangBuiltLinux/linux/issues/517Suggested-by:
Peter Smith <peter.smith@linaro.org> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Fabrice Gasnier authored
[ Upstream commit 79b44995 ] During probe, return the "get_irq" error value instead of -EINVAL which allows the driver to be deferred probed if needed. Fix also the case where of_irq_get() returns a negative value. Note : On failure of_irq_get() returns 0 or a negative value while platform_get_irq() returns a negative value. Fixes: aeb068c5 ("i2c: i2c-stm32f7: add driver") Reviewed-by:
Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Signed-off-by:
Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Marek Vasut authored
[ Upstream commit dc6b698a ] With CONFIG_PROVE_LOCKING=y, using sysfs to remove a bridge with a device below it causes a lockdep warning, e.g., # echo 1 > /sys/class/pci_bus/0000:00/device/0000:00:00.0/remove ============================================ WARNING: possible recursive locking detected ... pci_bus 0000:01: busn_res: [bus 01] is released The remove recursively removes the subtree below the bridge. Each call uses a different lock so there's no deadlock, but the locks were all created with the same lockdep key so the lockdep checker can't tell them apart. Mark the "remove" sysfs attribute with __ATTR_IGNORE_LOCKDEP() as it is safe to ignore the lockdep check between different "remove" kernfs instances. There's discussion about a similar issue in USB at [1], which resulted in 356c05d5 ("sysfs: get rid of some lockdep false positives") and e9b526fe ("i2c: suppress lockdep warning on delete_device"), which do basically the same thing for USB "remove" and i2c "delete_device" files. [1] https://lore.kernel.org/r/Pine.LNX.4.44L0.1204251436140.1206-100000@iolanthe.rowland.org Link: https://lore.kernel.org/r/20190526225151.3865-1-marek.vasut@gmail.comSigned-off-by:
Marek Vasut <marek.vasut+renesas@gmail.com> [bhelgaas: trim commit log, details at above links] Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Phil Edworthy <phil.edworthy@renesas.com> Cc: Simon Horman <horms+renesas@verge.net.au> Cc: Tejun Heo <tj@kernel.org> Cc: Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Stefan Roese authored
[ Upstream commit d9948267 ] This patch adds a check for the GPIOs property existence, before the GPIO is requested. This fixes an issue seen when the 8250 mctrl_gpio support is added (2nd patch in this patch series) on x86 platforms using ACPI. Here Mika's comments from 2016-08-09: " I noticed that with v4.8-rc1 serial console of some of our Broxton systems does not work properly anymore. I'm able to see output but input does not work. I bisected it down to commit 4ef03d32 ("tty/serial/8250: use mctrl_gpio helpers"). The reason why it fails is that in ACPI we do not have names for GPIOs (except when _DSD is used) so we use the "idx" to index into _CRS GPIO resources. Now mctrl_gpio_init_noauto() goes through a list of GPIOs calling devm_gpiod_get_index_optional() passing "idx" of 0 for each. The UART device in Broxton has following (simplified) ACPI description: Device (URT4) { ... Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer) { 0x003A } GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer) { 0x003D } }) In this case it finds the first GPIO (0x003A which happens to be RX pin for that UART), turns it into GPIO which then breaks input for the UART device. This also breaks systems with bluetooth connected to UART (those typically have some GPIOs in their _CRS). Any ideas how to fix this? We cannot just drop the _CRS index lookup fallback because that would break many existing machines out there so maybe we can limit this to only DT enabled machines. Or alternatively probe if the property first exists before trying to acquire the GPIOs (using device_property_present()). " This patch implements the fix suggested by Mika in his statement above. Signed-off-by:
Stefan Roese <sr@denx.de> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
Yegor Yefremov <yegorslists@googlemail.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Yegor Yefremov <yegorslists@googlemail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Giulio Benetti <giulio.benetti@micronovasrl.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Sean Paul authored
[ Upstream commit 4368a153 ] add_display_components() calls of_platform_populate, and we depopluate on pdev remove, but not when probe fails. So if we get a probe deferral in one of the components, we won't depopulate the platform. This causes the core to keep references to devices which should be destroyed, which causes issues when those same devices try to re-initialize on the next probe attempt. I think this is the reason we had issues with the gmu's device-managed resources on deferral (worked around in commit 94e3a17f33a5). Reviewed-by:
Rob Clark <robdclark@chromium.org> Signed-off-by:
Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20190617201301.133275-3-sean@poorly.runSigned-off-by:
-
Alexey Kardashevskiy authored
[ Upstream commit df5be5be ] When the firmware does PCI BAR resource allocation, it passes the assigned addresses and flags (prefetch/64bit/...) via the "reg" property of a PCI device device tree node so the kernel does not need to do resource allocation. The flags are stored in resource::flags - the lower byte stores PCI_BASE_ADDRESS_SPACE/etc bits and the other bytes are IORESOURCE_IO/etc. Some flags from PCI_BASE_ADDRESS_xxx and IORESOURCE_xxx are duplicated, such as PCI_BASE_ADDRESS_MEM_PREFETCH/PCI_BASE_ADDRESS_MEM_TYPE_64/etc. When parsing the "reg" property, we copy the prefetch flag but we skip on PCI_BASE_ADDRESS_MEM_TYPE_64 which leaves the flags out of sync. The missing IORESOURCE_MEM_64 flag comes into play under 2 conditions: 1. we remove PCI_PROBE_ONLY for pseries (by hacking pSeries_setup_arch() or by passing "/chosen/linux,pci-probe-only"); 2. we request resource alignment (by passing pci=resource_alignment= via the kernel cmd line to request PAGE_SIZE alignment or defining ppc_md.pcibios_default_alignment which returns anything but 0). Note that the alignment requests are ignored if PCI_PROBE_ONLY is enabled. With 1) and 2), the generic PCI code in the kernel unconditionally decides to: - reassign the BARs in pci_specified_resource_alignment() (works fine) - write new BARs to the device - this fails for 64bit BARs as the generic code looks at IORESOURCE_MEM_64 (not set) and writes only lower 32bits of the BAR and leaves the upper 32bit unmodified which breaks BAR mapping in the hypervisor. This fixes the issue by copying the flag. This is useful if we want to enforce certain BAR alignment per platform as handling subpage sized BARs is proven to cause problems with hotplug (SLOF already aligns BARs to 64k). Signed-off-by:
Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by:
Sam Bobroff <sbobroff@linux.ibm.com> Reviewed-by:
Oliver O'Halloran <oohall@gmail.com> Reviewed-by:
Shawn Anastasio <shawn@anastas.io> Signed-off-by:
-
Raul E Rangel authored
[ Upstream commit de23f0b7 ] The O2 controller supports 8-bit EMMC access. JESD84-B51 section A.6.3.a defines the bus testing procedure that `mmc_select_bus_width()` implements. This is used to determine the actual bus width of the eMMC. Signed-off-by:
Raul E Rangel <rrangel@chromium.org> Acked-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Andrzej Pietrasiewicz authored
[ Upstream commit 50859551 ] In some cases the "Allocate & copy" block in ffs_epfile_io() is not executed. Consequently, in such a case ffs_alloc_buffer() is never called and struct ffs_io_data is not initialized properly. This in turn leads to problems when ffs_free_buffer() is called at the end of ffs_epfile_io(). This patch uses kzalloc() instead of kmalloc() in the aio case and memset() in non-aio case to properly initialize struct ffs_io_data. Signed-off-by:
Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by:
Felipe Balbi <felipe.balbi@linux.intel.com> Signed-off-by:
-
Serge Semin authored
[ Upstream commit 13b18d35 ] A bug was introduced by commit b3b57646 ("tty: serial_core: convert uart_open to use tty_port_open"). It caused a constant warning printed into the system log regarding the tty and port counter mismatch: [ 21.644197] ttyS ttySx: tty_port_close_start: tty->count = 1 port count = 2 in case if session hangup was detected so the warning is printed starting from the second open-close iteration. Particularly the problem was discovered in situation when there is a serial tty device without hardware back-end being setup. It is considered by the tty-serial subsystems as a hardware problem with session hang up. In this case uart_startup() will return a positive value with TTY_IO_ERROR flag set in corresponding tty_struct instance. The same value will get passed to be returned from the activate() callback and then being returned from tty_port_open(). But since in this case tty_port_block_til_ready() isn't called the TTY_PORT_ACTIVE flag isn't set (while the method had been called before tty_port_open conversion was introduced and the rest of the subsystem code expected the bit being set in this case), which prevents the uart_hangup() method to perform any cleanups including the tty port counter setting to zero. So the next attempt to open/close the tty device will discover the counters mismatch. In order to fix the problem we need to manually set the TTY_PORT_ACTIVE flag in case if uart_startup() returned a positive value. In this case the hang up procedure will perform a full set of cleanup actions including the port ref-counter resetting. Fixes: b3b57646 "tty: serial_core: convert uart_open to use tty_port_open" Signed-off-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
-
Sergey Organov authored
[ Upstream commit 4e828c3e ] imx_uart_set_termios() called imx_uart_rts_active(), or imx_uart_rts_inactive() before taking port->port.lock. As a consequence, sport->port.mctrl that these functions modify could have been changed without holding port->port.lock. Moved locking of port->port.lock above the calls to fix the issue. Signed-off-by:
Sergey Organov <sorganov@gmail.com> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 99b9683f ] When fixing up the clock in vop_crtc_mode_fixup() we're not doing it quite correctly. Specifically if we've got the true clock 266666667 Hz, we'll perform this calculation: 266666667 / 1000 => 266666 Later when we try to set the clock we'll do clk_set_rate(266666 * 1000). The common clock framework won't actually pick the proper clock in this case since it always wants clocks <= the specified one. Let's solve this by using DIV_ROUND_UP. Fixes: b59b8de3 ("drm/rockchip: return a true clock rate to adjusted_mode") Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Yakir Yang <ykk@rock-chips.com> Signed-off-by:
Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20190614224730.98622-1-dianders@chromium.orgSigned-off-by:
-
Nathan Lynch authored
[ Upstream commit e59a175f ] CPU online/offline code paths are sensitive to parts of the device tree (various cpu node properties, cache nodes) that can be changed as a result of a migration. Prevent CPU hotplug while the device tree potentially is inconsistent. Fixes: 410bccf9 ("powerpc/pseries: Partition migration in the kernel") Signed-off-by:
Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by:
Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by:
-
Hariprasad Kelam authored
[ Upstream commit 88099f53 ] this patch fixes below compilation error drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c: In function ‘dcn10_apply_ctx_for_surface’: drivers/gpu/drm/amd/amdgpu/../display/dc/dcn10/dcn10_hw_sequencer.c:2378:3: error: implicit declaration of function ‘udelay’ [-Werror=implicit-function-declaration] udelay(underflow_check_delay_us); Signed-off-by:
Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Yoshihiro Shimoda authored
[ Upstream commit d4a36e82 ] This patch fixes memory leak at error paths of the probe function. In for_each_child_of_node, if the loop returns, the driver should call of_put_node() before returns. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Fixes: 1233f59f ("phy: Renesas R-Car Gen2 PHY driver") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
Kishon Vijay Abraham I <kishon@ti.com> Signed-off-by:
-
David Riley authored
[ Upstream commit 9ff3a5c8 ] After data is copied to the cache entry, atomic_set is used indicate that the data is the entry is valid without appropriate memory barriers. Similarly the read side was missing the corresponding memory barriers. Signed-off-by:
David Riley <davidriley@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/20190610211810.253227-5-davidriley@chromium.orgSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit f04bee34 ] [Why] Unlike our regular connectors, MST connectors don't start off with an initial connector state. This causes a NULL pointer dereference to occur when attaching the bpc property since it tries to modify the connector state. We need an initial connector state on the connector to avoid the crash. [How] Use our reset helper to allocate an initial state and reset the values to their defaults. We were already doing this before, just not for MST connectors. Signed-off-by:
Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Reviewed-by:
Leo Li <sunpeng.li@amd.com> Signed-off-by:
-
Rautkoski Kimmo EXT authored
[ Upstream commit db1b5bc0 ] Interrupt handler checked THRE bit (transmitter holding register empty) in LSR to detect if TX fifo is empty. In case when there is only receive interrupts the TX handling got called because THRE bit in LSR is set when there is no transmission (FIFO empty). TX handling caused TX stop, which in RS-485 half-duplex mode actually resets receiver FIFO. This is not desired during reception because of possible data loss. The fix is to check if THRI is set in IER in addition of the TX fifo status. THRI in IER is set when TX is started and cleared when TX is stopped. This ensures that TX handling is only called when there is really transmission on going and an interrupt for THRE and not when there are only RX interrupts. Signed-off-by:
Kimmo Rautkoski <ext-kimmo.rautkoski@vaisala.com> Signed-off-by:
-
Jorge Ramirez-Ortiz authored
[ Upstream commit ba3684f9 ] The function msm_wait_for_xmitr can be taken with interrupts disabled. In order to avoid a potential system lockup - demonstrated under stress testing conditions on SoC QCS404/5 - make sure we wait for a bounded amount of time. Tested on SoC QCS404. Signed-off-by:
Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Signed-off-by:
-
Kefeng Wang authored
[ Upstream commit c7ad9ba0 ] When modprobe/rmmod/modprobe module, if platform_driver_register() fails, the kernel complained, proc_dir_entry 'driver/digicolor-usart' already registered WARNING: CPU: 1 PID: 5636 at fs/proc/generic.c:360 proc_register+0x19d/0x270 Fix this by adding uart_unregister_driver() when platform_driver_register() fails. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
-
Wang Hai authored
[ Upstream commit 65f1a0d3 ] If bus_register fails. On its error handling path, it has cleaned up what it has done. There is no need to call bus_unregister again. Otherwise, if bus_unregister is called, issues such as null-ptr-deref will arise. Syzkaller report this: kobject_add_internal failed for memstick (error: -12 parent: bus) BUG: KASAN: null-ptr-deref in sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467 Read of size 8 at addr 0000000000000078 by task syz-executor.0/4460 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xa9/0x10e lib/dump_stack.c:113 __kasan_report+0x171/0x18d mm/kasan/report.c:321 kasan_report+0xe/0x20 mm/kasan/common.c:614 sysfs_remove_file_ns+0x1b/0x40 fs/sysfs/file.c:467 sysfs_remove_file include/linux/sysfs.h:519 [inline] bus_remove_file+0x6c/0x90 drivers/base/bus.c:145 remove_probe_files drivers/base/bus.c:599 [inline] bus_unregister+0x6e/0x100 drivers/base/bus.c:916 ? 0xffffffffc1590000 memstick_init+0x7a/0x1000 [memstick] do_one_initcall+0xb9/0x3b5 init/main.c:914 do_init_module+0xe0/0x330 kernel/module.c:3468 load_module+0x38eb/0x4270 kernel/module.c:3819 __do_sys_finit_module+0x162/0x190 kernel/module.c:3909 do_syscall_64+0x72/0x2a0 arch/x86/entry/common.c:298 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: baf8532a ("memstick: initial commit for Sony MemoryStick support") Reported-by:
Wang Hai <wanghai26@huawei.com> Signed-off-by:
-
Daniel Vetter authored
[ Upstream commit d99004d7 ] I. was. blind. Caught with vkms, which has some really slow crc computation function. Fixes: 1882018a ("drm/crc-debugfs: User irqsafe spinlock in drm_crtc_add_crc_entry") Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190606211544.5389-1-daniel.vetter@ffwll.chSigned-off-by:
-
Daniel Vetter authored
[ Upstream commit 1882018a ] We can be called from any context, we need to be prepared. Noticed this while hacking on vkms, which calls this function from a normal worker. Which really upsets lockdep. Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Emil Velikov <emil.velikov@collabora.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
-
Thierry Reding authored
[ Upstream commit 1e390478 ] Recent versions of the DMA API debug code have started to warn about violations of the maximum DMA segment size. This is because the segment size defaults to 64 KiB, which can easily be exceeded in large buffer allocations such as used in DRM/KMS for framebuffers. Technically the Tegra SMMU and ARM SMMU don't have a maximum segment size (they map individual pages irrespective of whether they are contiguous or not), so the choice of 4 MiB is a bit arbitrary here. The maximum segment size is a 32-bit unsigned integer, though, so we can't set it to the correct maximum size, which would be the size of the aperture. Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
-
Jyri Sarha authored
[ Upstream commit 8dbfc5b6 ] The pixel clock unit in the first two registers (0x00 and 0x01) of sii9022 is 10kHz, not 1kHz as in struct drm_display_mode. Division by 10 fixes the issue. Signed-off-by:
Jyri Sarha <jsarha@ti.com> Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Tomi Valkeinen authored
[ Upstream commit 32315730 ] We need to know the link bandwidth to filter out modes we cannot support, so we need to have read the display props before doing the filtering. To ensure we have up to date display props, call tc_get_display_props() in the beginning of tc_connector_get_modes(). Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Reviewed-by:
-
Alex Williamson authored
[ Upstream commit 76002d8b ] Commit 0e7df224 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") allows the user to specify that drivers for VFs of a PF should not be probed, but it actually causes pci_device_probe() to return success back to the driver core in this case. Therefore by all sysfs appearances the device is bound to a driver, the driver link from the device exists as does the device link back from the driver, yet the driver's probe function is never called on the device. We also fail to do any sort of cleanup when we're prohibited from probing the device, the IRQ setup remains in place and we even hold a device reference. Instead, abort with errno before any setup or references are taken when pci_device_can_probe() prevents us from trying to probe the device. Link: https://lore.kernel.org/lkml/155672991496.20698.4279330795743262888.stgit@gimli.home Fixes: 0e7df224 ("PCI: Add sysfs sriov_drivers_autoprobe to control VF driver binding") Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
-
Gen Zhang authored
[ Upstream commit 9f1f1a2d ] In drm_load_edid_firmware(), fwstr is allocated by kstrdup(). And fwstr is dereferenced in the following codes. However, memory allocation functions such as kstrdup() may fail and returns NULL. Dereferencing this null pointer may cause the kernel go wrong. Thus we should check this kstrdup() operation. Further, if kstrdup() returns NULL, we should return ERR_PTR(-ENOMEM) to the caller site. Signed-off-by:
Gen Zhang <blackgod016574@gmail.com> Reviewed-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Oak Zeng authored
[ Upstream commit 065e4bdf ] Previous codes assumes there are two sdma engines. This is not true e.g., Raven only has 1 SDMA engine. Fix the issue by using sdma engine number info in device_info. Signed-off-by:
Oak Zeng <Oak.Zeng@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Oak Zeng authored
[ Upstream commit e73390d1 ] Free mqd_mem_obj it GTT buffer allocation for MQD+control stack fails. Signed-off-by:
Oak Zeng <ozeng@amd.com> Reviewed-by:
-
Paul Hsieh authored
[ Upstream commit 1090d58d ] [Why] When disable driver, OS will set backlight optimization then do stop device. But this flag will cause driver to enable ABM when driver disabled. [How] Send ABM disable command before destroy ABM construct Signed-off-by:
Paul Hsieh <paul.hsieh@amd.com> Reviewed-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com> Signed-off-by:
-
Tiecheng Zhou authored
[ Upstream commit fe2b5323 ] it requires to initialize HDP_NONSURFACE_BASE, so as to avoid using the value left by a previous VM under sriov scenario. v2: it should not hurt baremetal, generalize it for both sriov and baremetal Signed-off-by:
Emily Deng <Emily.Deng@amd.com> Signed-off-by:
Tiecheng Zhou <Tiecheng.Zhou@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Nicholas Kazlauskas authored
[ Upstream commit 1352c779 ] [Why] An assertion is thrown when using SURFACE_PIXEL_FORMAT_GRPH_RGB565 formats on DCE since the prescale_params->scale wasn't being filled. Found by a dmesg-fail when running the igt@kms_plane@pixel-format-pipe-a-planes test on Baffin. [How] Fill in the scale parameter. Signed-off-by:
Roman Li <Roman.Li@amd.com> Acked-by:
-
Christophe Leroy authored
[ Upstream commit 06aaa3d0 ] SMC relocation can also be activated earlier by the bootloader, so the driver's behaviour cannot rely on selected kernel config. When the SMC is relocated, CPM_CR_INIT_TRX cannot be used. But the only thing CPM_CR_INIT_TRX does is to clear the rstate and tstate registers, so this can be done manually, even when SMC is not relocated. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Fixes: 9ab92120 ("cpm_uart: fix non-console port startup bug") Signed-off-by:
-
